kernel_optimize_test/arch/sh/include/mach-se/mach/se7722.h
Paul Mundt b894701e7c sh: mach-se evt2irq migration.
Migrate Solution Engine boards to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 15:34:49 +09:00

107 lines
3.4 KiB
C

#ifndef __ASM_SH_SE7722_H
#define __ASM_SH_SE7722_H
/*
* linux/include/asm-sh/se7722.h
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* Hitachi UL SolutionEngine 7722 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/sh_intc.h>
#include <asm/addrspace.h>
/* Box specific addresses. */
#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
#define PA_ROM 0xa0000000 /* EPROM */
#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
#define PA_FROM 0xa1000000 /* Flash-ROM */
#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
#define PA_EXT1 0xa4000000
#define PA_EXT1_SIZE 0x04000000
#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */
#define PA_SDRAM_SIZE 0x04000000
#define PA_EXT4 0xb0000000
#define PA_EXT4_SIZE 0x04000000
#define PA_PERIPHERAL 0xB0000000
#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */
#define MRSHPC_OPTION (PA_MRSHPC + 6)
#define MRSHPC_CSR (PA_MRSHPC + 8)
#define MRSHPC_ISR (PA_MRSHPC + 10)
#define MRSHPC_ICR (PA_MRSHPC + 12)
#define MRSHPC_CPWCR (PA_MRSHPC + 14)
#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
#define MRSHPC_CDCR (PA_MRSHPC + 28)
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */
#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */
/* GPIO */
#define FPGA_IN 0xb1840000UL
#define FPGA_OUT 0xb1840004UL
#define PORT_PECR 0xA4050108UL
#define PORT_PJCR 0xA4050110UL
#define PORT_PSELD 0xA4050154UL
#define PORT_PSELB 0xA4050150UL
#define PORT_PSELC 0xA4050152UL
#define PORT_PKCR 0xA4050112UL
#define PORT_PHCR 0xA405010EUL
#define PORT_PLCR 0xA4050114UL
#define PORT_PMCR 0xA4050116UL
#define PORT_PRCR 0xA405011CUL
#define PORT_PXCR 0xA4050148UL
#define PORT_PSELA 0xA405014EUL
#define PORT_PYCR 0xA405014AUL
#define PORT_PZCR 0xA405014CUL
#define PORT_HIZCRA 0xA4050158UL
#define PORT_HIZCRC 0xA405015CUL
/* IRQ */
#define IRQ0_IRQ evt2irq(0x600)
#define IRQ1_IRQ evt2irq(0x620)
#define IRQ01_MODE 0xb1800000
#define IRQ01_STS 0xb1800004
#define IRQ01_MASK 0xb1800008
/* Bits in IRQ01_* registers */
#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */
#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */
#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
#define SE7722_FPGA_IRQ_NR 6
/* arch/sh/boards/se/7722/irq.c */
extern unsigned int se7722_fpga_irq[];
void init_se7722_IRQ(void);
#define __IO_PREFIX se7722
#include <asm/io_generic.h>
#endif /* __ASM_SH_SE7722_H */