AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
f3964599c2
kernel_optimize_test/drivers/acpi/acpica/hwgpe.c
Rafael J. Wysocki 7a8379eb41 ACPICA: Add support for using logical addresses of GPE blocks 
The logical address of every GPE block in system memory must be
known before passing it to acpi_ev_initialize_gpe_block(), because
memory cannot be mapped on the fly from an interrupt handler.
Accordingly, the host OS must map every GPE block in system
memory upfront and it can store the logical addresses of GPE
blocks for future use.

If these logical addresses were known to ACPICA, it could use them
instead of the corresponding physical addresses of GPE block for
GPE register accesses and the memory mapping lookups carried out
by acpi_os_read_memory() and acpi_os_write_memory() on every
attempt to access a GPE register would not be necessary any more.

To allow that to happen, introduce the ACPI_GPE_USE_LOGICAL_ADDRESSES
symbol to indicate whether or not the host OS wants ACPICA to use the
logical addresses of GPE registers in system memory directly (which
is the case if this symbol is defined).  Moreover, conditional on
whether ACPI_GPE_USE_LOGICAL_ADDRESSES is defined, introduce two new
global variables for storing the logical addresses of the FADT GPE
blocks 0 and 1, respectively, acpi_gbl_xgpe0_block_logical_address and
acpi_gbl_xgpe1_block_logical_address, make acpi_ev_gpe_initialize()
pass their values instead of the physical addresses of the GPE blocks
in question to acpi_ev_create_gpe_block() and modify
acpi_hw_gpe_read() and acpi_hw_gpe_write() to access memory directly
via the addresses stored in the struct acpi_gpe_address objects,
which are expected to be the logical addresses of GPE registers if
ACPI_GPE_USE_LOGICAL_ADDRESSES is defined.

With the above changes in place, a host OS wanting ACPICA to
access GPE registers directly through their logical addresses
needs to define the ACPI_GPE_USE_LOGICAL_ADDRESSES symbol and
make sure that the logical addresses of the FADT GPE blocks 0
and 1 are stored in acpi_gbl_xgpe0_block_logical_address and
acpi_gbl_xgpe1_block_logical_address, respectively, prior to
calling acpi_ev_gpe_initialize().

[If such a host OS also uses acpi_install_gpe_block() to add
 non-FADT GPE register blocks located in system memory, it must
 pass their logical addresses instead of their physical addresses
 to this function.]

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-11 16:44:45 +02:00

684 lines
18 KiB
C
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/******************************************************************************
*
* Module Name: hwgpe - Low level GPE enable/disable/clear functions
*
* Copyright (C) 2000 - 2020, Intel Corp.
*
*****************************************************************************/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwgpe")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static acpi_status
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *context);
static acpi_status
acpi_hw_gpe_enable_write(u8 enable_mask,
struct acpi_gpe_register_info *gpe_register_info);
/******************************************************************************
*
* FUNCTION: acpi_hw_gpe_read
*
* PARAMETERS: value - Where the value is returned
* reg - GPE register structure
*
* RETURN: Status
*
* DESCRIPTION: Read from a GPE register in either memory or IO space.
*
* LIMITATIONS: <These limitations also apply to acpi_hw_gpe_write>
* space_ID must be system_memory or system_IO.
*
******************************************************************************/
acpi_status acpi_hw_gpe_read(u64 *value, struct acpi_gpe_address *reg)
{
acpi_status status;
u32 value32;
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
#ifdef ACPI_GPE_USE_LOGICAL_ADDRESSES
*value = (u64)ACPI_GET8(reg->address);
return_ACPI_STATUS(AE_OK);
#else
return acpi_os_read_memory((acpi_physical_address)reg->address,
value, ACPI_GPE_REGISTER_WIDTH);
#endif
}
status = acpi_os_read_port((acpi_io_address)reg->address,
&value32, ACPI_GPE_REGISTER_WIDTH);
if (ACPI_FAILURE(status))
return_ACPI_STATUS(status);
*value = (u64)value32;
return_ACPI_STATUS(AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_gpe_write
*
* PARAMETERS: value - Value to be written
* reg - GPE register structure
*
* RETURN: Status
*
* DESCRIPTION: Write to a GPE register in either memory or IO space.
*
******************************************************************************/
acpi_status acpi_hw_gpe_write(u64 value, struct acpi_gpe_address *reg)
{
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
#ifdef ACPI_GPE_USE_LOGICAL_ADDRESSES
ACPI_SET8(reg->address, value);
return_ACPI_STATUS(AE_OK);
#else
return acpi_os_write_memory((acpi_physical_address)reg->address,
value, ACPI_GPE_REGISTER_WIDTH);
#endif
}
return acpi_os_write_port((acpi_io_address)reg->address, (u32)value,
ACPI_GPE_REGISTER_WIDTH);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_get_gpe_register_bit
*
* PARAMETERS: gpe_event_info - Info block for the GPE
*
* RETURN: Register mask with a one in the GPE bit position
*
* DESCRIPTION: Compute the register mask for this GPE. One bit is set in the
* correct position for the input GPE.
*
******************************************************************************/
u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info)
{
return ((u32)1 <<
(gpe_event_info->gpe_number -
gpe_event_info->register_info->base_gpe_number));
}
/******************************************************************************
*
* FUNCTION: acpi_hw_low_set_gpe
*
* PARAMETERS: gpe_event_info - Info block for the GPE to be disabled
* action - Enable or disable
*
* RETURN: Status
*
* DESCRIPTION: Enable or disable a single GPE in the parent enable register.
* The enable_mask field of the involved GPE register must be
* updated by the caller if necessary.
*
******************************************************************************/
acpi_status
acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status = AE_OK;
u64 enable_mask;
u32 register_bit;
ACPI_FUNCTION_ENTRY();
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return (AE_NOT_EXIST);
}
/* Get current value of the enable register that contains this GPE */
status = acpi_hw_gpe_read(&enable_mask,
&gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Set or clear just the bit that corresponds to this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
switch (action) {
case ACPI_GPE_CONDITIONAL_ENABLE:
/* Only enable if the corresponding enable_mask bit is set */
if (!(register_bit & gpe_register_info->enable_mask)) {
return (AE_BAD_PARAMETER);
}
/*lint -fallthrough */
case ACPI_GPE_ENABLE:
ACPI_SET_BIT(enable_mask, register_bit);
break;
case ACPI_GPE_DISABLE:
ACPI_CLEAR_BIT(enable_mask, register_bit);
break;
default:
ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u", action));
return (AE_BAD_PARAMETER);
}
if (!(register_bit & gpe_register_info->mask_for_run)) {
/* Write the updated enable mask */
status = acpi_hw_gpe_write(enable_mask,
&gpe_register_info->enable_address);
}
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_clear_gpe
*
* PARAMETERS: gpe_event_info - Info block for the GPE to be cleared
*
* RETURN: Status
*
* DESCRIPTION: Clear the status bit for a single GPE.
*
******************************************************************************/
acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
u32 register_bit;
ACPI_FUNCTION_ENTRY();
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return (AE_NOT_EXIST);
}
/*
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
status = acpi_hw_gpe_write(register_bit,
&gpe_register_info->status_address);
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_get_gpe_status
*
* PARAMETERS: gpe_event_info - Info block for the GPE to queried
* event_status - Where the GPE status is returned
*
* RETURN: Status
*
* DESCRIPTION: Return the status of a single GPE.
*
******************************************************************************/
acpi_status
acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info,
acpi_event_status *event_status)
{
u64 in_byte;
u32 register_bit;
struct acpi_gpe_register_info *gpe_register_info;
acpi_event_status local_event_status = 0;
acpi_status status;
ACPI_FUNCTION_ENTRY();
if (!event_status) {
return (AE_BAD_PARAMETER);
}
/* GPE currently handled? */
if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) !=
ACPI_GPE_DISPATCH_NONE) {
local_event_status |= ACPI_EVENT_FLAG_HAS_HANDLER;
}
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
/* Get the register bitmask for this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
/* GPE currently enabled? (enabled for runtime?) */
if (register_bit & gpe_register_info->enable_for_run) {
local_event_status |= ACPI_EVENT_FLAG_ENABLED;
}
/* GPE currently masked? (masked for runtime?) */
if (register_bit & gpe_register_info->mask_for_run) {
local_event_status |= ACPI_EVENT_FLAG_MASKED;
}
/* GPE enabled for wake? */
if (register_bit & gpe_register_info->enable_for_wake) {
local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
}
/* GPE currently enabled (enable bit == 1)? */
status = acpi_hw_gpe_read(&in_byte, &gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
if (register_bit & in_byte) {
local_event_status |= ACPI_EVENT_FLAG_ENABLE_SET;
}
/* GPE currently active (status bit == 1)? */
status = acpi_hw_gpe_read(&in_byte, &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
return (status);
}
if (register_bit & in_byte) {
local_event_status |= ACPI_EVENT_FLAG_STATUS_SET;
}
/* Set return value */
(*event_status) = local_event_status;
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_gpe_enable_write
*
* PARAMETERS: enable_mask - Bit mask to write to the GPE register
* gpe_register_info - Gpe Register info
*
* RETURN: Status
*
* DESCRIPTION: Write the enable mask byte to the given GPE register.
*
******************************************************************************/
static acpi_status
acpi_hw_gpe_enable_write(u8 enable_mask,
struct acpi_gpe_register_info *gpe_register_info)
{
acpi_status status;
gpe_register_info->enable_mask = enable_mask;
status = acpi_hw_gpe_write(enable_mask,
&gpe_register_info->enable_address);
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_disable_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Disable all GPEs within a single GPE block
*
******************************************************************************/
acpi_status
acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block, void *context)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
/* Disable all GPEs in this register */
status =
acpi_hw_gpe_enable_write(0x00,
&gpe_block->register_info[i]);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_clear_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Clear status bits for all GPEs within a single GPE block
*
******************************************************************************/
acpi_status
acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block, void *context)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
/* Clear status on all GPEs in this register */
status = acpi_hw_gpe_write(0xFF,
&gpe_block->register_info[i].status_address);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_runtime_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
* combination wake/run GPEs.
*
******************************************************************************/
acpi_status
acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *context)
{
u32 i;
acpi_status status;
struct acpi_gpe_register_info *gpe_register_info;
u8 enable_mask;
/* NOTE: assumes that all GPEs are currently disabled */
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
gpe_register_info = &gpe_block->register_info[i];
if (!gpe_register_info->enable_for_run) {
continue;
}
/* Enable all "runtime" GPEs in this register */
enable_mask = gpe_register_info->enable_for_run &
~gpe_register_info->mask_for_run;
status =
acpi_hw_gpe_enable_write(enable_mask, gpe_register_info);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_wakeup_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
* combination wake/run GPEs.
*
******************************************************************************/
static acpi_status
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *context)
{
u32 i;
acpi_status status;
struct acpi_gpe_register_info *gpe_register_info;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
gpe_register_info = &gpe_block->register_info[i];
/*
* Enable all "wake" GPEs in this register and disable the
* remaining ones.
*/
status =
acpi_hw_gpe_enable_write(gpe_register_info->enable_for_wake,
gpe_register_info);
if (ACPI_FAILURE(status)) {
return (status);
}
}
return (AE_OK);
}
struct acpi_gpe_block_status_context {
struct acpi_gpe_register_info *gpe_skip_register_info;
u8 gpe_skip_mask;
u8 retval;
};
/******************************************************************************
*
* FUNCTION: acpi_hw_get_gpe_block_status
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
* context - GPE list walk context data
*
* RETURN: Success
*
* DESCRIPTION: Produce a combined GPE status bits mask for the given block.
*
******************************************************************************/
static acpi_status
acpi_hw_get_gpe_block_status(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *context)
{
struct acpi_gpe_block_status_context *c = context;
struct acpi_gpe_register_info *gpe_register_info;
u64 in_enable, in_status;
acpi_status status;
u8 ret_mask;
u32 i;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
gpe_register_info = &gpe_block->register_info[i];
status = acpi_hw_gpe_read(&in_enable,
&gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
continue;
}
status = acpi_hw_gpe_read(&in_status,
&gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
continue;
}
ret_mask = in_enable & in_status;
if (ret_mask && c->gpe_skip_register_info == gpe_register_info) {
ret_mask &= ~c->gpe_skip_mask;
}
c->retval |= ret_mask;
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_disable_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
*
******************************************************************************/
acpi_status acpi_hw_disable_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block, NULL);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_runtime_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_hw_enable_all_runtime_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block, NULL);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_wakeup_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_hw_enable_all_wakeup_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_check_all_gpes
*
* PARAMETERS: gpe_skip_device - GPE devoce of the GPE to skip
* gpe_skip_number - Number of the GPE to skip
*
* RETURN: Combined status of all GPEs
*
* DESCRIPTION: Check all enabled GPEs in all GPE blocks, except for the one
* represented by the "skip" arguments, and return TRUE if the
* status bit is set for at least one of them of FALSE otherwise.
*
******************************************************************************/
u8 acpi_hw_check_all_gpes(acpi_handle gpe_skip_device, u32 gpe_skip_number)
{
struct acpi_gpe_block_status_context context = {
.gpe_skip_register_info = NULL,
.retval = 0,
};
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_hw_check_all_gpes);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_skip_device,
gpe_skip_number);
if (gpe_event_info) {
context.gpe_skip_register_info = gpe_event_info->register_info;
context.gpe_skip_mask = acpi_hw_get_gpe_register_bit(gpe_event_info);
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
(void)acpi_ev_walk_gpe_list(acpi_hw_get_gpe_block_status, &context);
return (context.retval != 0);
}
#endif /* !ACPI_REDUCED_HARDWARE */
View Git Blame Copy Permalink