forked from luck/tmp_suning_uos_patched
74c551ca5a
When dealing with some copper modules, we can't positively know the module capabilities are until we have probed the PHY. Without the full capabilities, we may end up failing a module that we could otherwise drive with a restricted set of capabilities. An example of this would be a module with a NBASE-T PHY plugged into a host that supports phy interface modes 2500BASE-X and SGMII. The PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes, which means a subset of the capabilities are compatible with the host. However, reading the module EEPROM leads us to believe that the module only supports ethtool link mode 10GBASE-T, which is incompatible with the host - and thus results in the module being rejected. This patch adds an extra notification which are triggered after the SFP module's PHY probe, and a corresponding notification just before the PHY is removed. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
33 lines
1.0 KiB
C
33 lines
1.0 KiB
C
#ifndef SFP_H
|
|
#define SFP_H
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/sfp.h>
|
|
|
|
struct sfp;
|
|
|
|
struct sfp_socket_ops {
|
|
void (*attach)(struct sfp *sfp);
|
|
void (*detach)(struct sfp *sfp);
|
|
void (*start)(struct sfp *sfp);
|
|
void (*stop)(struct sfp *sfp);
|
|
int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo);
|
|
int (*module_eeprom)(struct sfp *sfp, struct ethtool_eeprom *ee,
|
|
u8 *data);
|
|
};
|
|
|
|
int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev);
|
|
void sfp_remove_phy(struct sfp_bus *bus);
|
|
void sfp_link_up(struct sfp_bus *bus);
|
|
void sfp_link_down(struct sfp_bus *bus);
|
|
int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
|
|
void sfp_module_remove(struct sfp_bus *bus);
|
|
int sfp_module_start(struct sfp_bus *bus);
|
|
void sfp_module_stop(struct sfp_bus *bus);
|
|
int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
|
|
struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
|
|
const struct sfp_socket_ops *ops);
|
|
void sfp_unregister_socket(struct sfp_bus *bus);
|
|
|
|
#endif
|