Sergei Shtylyov f48ecc2f73 DA850: move NAND/NOR pin lists to the board file ... The NAND/NOR flash pin lists (da850_nand_pins/da850_nor_pins) are purely board specific and as such shouldn't be in da850.c -- copy them to board-da850-evm.c, renaming to da850_evm_nand_pins/da850_evm_nor_pins respectively, and merge the two lists in da850.c into one, representing the EMIF 2.5 module as a whole, just like we have it in da830.c... While at it, remove the '__init' modifier from da850_evm_setup_nor_nand() as this function is called from non '__init' code... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>		2010-09-24 07:40:25 -07:00
..
asp.h	ASoC: davinci: let platform data define edma queue numbers	2010-07-20 09:57:20 +01:00
cdce949.h	davinci: add support for CDCE949 clock synthesizer	2010-02-04 13:29:58 -08:00
clkdev.h
clock.h
common.h	Davinci: iotable based ioremap() interception	2010-05-13 10:05:31 -07:00
cp_intc.h	Davinci: aintc/cpintc - use ioremap()	2010-05-13 10:05:28 -07:00
cpufreq.h	davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator	2009-11-25 10:21:37 -08:00
cpuidle.h	davinci: cpuidle: move mapping of DDR2 controller registers out of driver	2010-02-04 13:29:38 -08:00
cputype.h	Davinci: tnetv107x cpu types	2010-05-06 15:02:05 -07:00
da8xx.h	DA850: move NAND/NOR pin lists to the board file	2010-09-24 07:40:25 -07:00
debug-macro.S	Davinci: generalized debug macros	2010-06-21 12:48:30 -07:00
dm355.h	DaVinci: move AEMIF #define's to the proper headers	2010-05-06 15:02:06 -07:00
dm365.h	DaVinci: move AEMIF #define's to the proper headers	2010-05-06 15:02:06 -07:00
dm644x.h	DaVinci: move AEMIF #define's to the proper headers	2010-05-06 15:02:06 -07:00
dm646x.h	davinci: dm646x EVM: Specify reserved EDMA channel/slots	2010-08-05 09:58:27 -07:00
edma.h	davinci: support for EDMA resource sharing	2010-08-05 09:58:25 -07:00
entry-macro.S
gpio.h	Davinci: tnetv107x initial gpio support	2010-06-21 12:48:31 -07:00
hardware.h	ARM: 5928/1: Change type of VMALLOC_END to unsigned long.	2010-02-15 21:40:33 +00:00
i2c.h	Merge branch 'for-next' into for-linus	2010-03-08 16:55:37 +01:00
io.h	davinci: Move IO device mapping macros from io.h to hardware.h	2009-08-26 10:57:01 +03:00
irqs.h	Davinci: tnetv107x IRQ definitions	2010-05-06 15:02:05 -07:00
keyscan.h	Input: davinci_keyscan - add device_enable method to platform data	2010-01-06 00:17:11 -08:00
memory.h	ARM: Remove 'node' argument form arch_adjust_zones()	2010-07-16 10:57:36 +01:00
mmc.h	davinci: mmc: pass number of SG segments as platform data	2010-05-27 09:12:39 -07:00
mux.h	DM365: Added more PINMUX configurations for AEMIF	2010-05-13 11:10:31 -07:00
nand.h	mtd: Add bad block table overrides to Davinci NAND driver	2009-11-30 11:31:09 +00:00
pm.h	davinci: add power management support	2010-02-04 13:29:55 -08:00
psc.h	Davinci: tnetv107x LPSC modules	2010-05-06 15:02:05 -07:00
serial.h	Davinci: tnetv107x decompresser uart definitions	2010-06-21 12:48:30 -07:00
spi.h	DaVinci: SPI: Adding header file for SPI support.	2010-03-01 10:20:22 -08:00
sram.h
system.h	Davinci: watchdog reset separation across socs	2010-05-06 15:02:09 -07:00
time.h
timex.h	davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h	2010-02-04 13:29:41 -08:00
tnetv107x.h	Davinci: tnetv107x soc support	2010-06-21 12:48:30 -07:00
uncompress.h	Davinci: tnetv107x decompresser uart definitions	2010-06-21 12:48:30 -07:00
usb.h	DaVinci: rename setup_usb() to davinci_setup_usb()	2009-11-25 10:21:33 -08:00
vmalloc.h	davinci: Move IO device mapping macros from io.h to hardware.h	2009-08-26 10:57:01 +03:00