forked from luck/tmp_suning_uos_patched
fa1be476a2
After requesting a state change, verify that the state change actually ocurred, and the system ends up in the expected state. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
481 lines
14 KiB
C
481 lines
14 KiB
C
/*
|
|
* PCI Error Recovery Driver for RPA-compliant PPC64 platform.
|
|
* Copyright (C) 2004, 2005 Linas Vepstas <linas@linas.org>
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <linas@us.ibm.com>
|
|
*
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/eeh.h>
|
|
#include <asm/eeh_event.h>
|
|
#include <asm/ppc-pci.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/rtas.h>
|
|
|
|
|
|
static inline const char * pcid_name (struct pci_dev *pdev)
|
|
{
|
|
if (pdev && pdev->dev.driver)
|
|
return pdev->dev.driver->name;
|
|
return "";
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static void print_device_node_tree (struct pci_dn *pdn, int dent)
|
|
{
|
|
int i;
|
|
if (!pdn) return;
|
|
for (i=0;i<dent; i++)
|
|
printk(" ");
|
|
printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
|
|
pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
|
|
pdn->eeh_pe_config_addr, pdn->node->full_name);
|
|
dent += 3;
|
|
struct device_node *pc = pdn->node->child;
|
|
while (pc) {
|
|
print_device_node_tree(PCI_DN(pc), dent);
|
|
pc = pc->sibling;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* irq_in_use - return true if this irq is being used
|
|
*/
|
|
static int irq_in_use(unsigned int irq)
|
|
{
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
if (desc->action)
|
|
rc = 1;
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* ------------------------------------------------------- */
|
|
/**
|
|
* eeh_report_error - report pci error to each device driver
|
|
*
|
|
* Report an EEH error to each device driver, collect up and
|
|
* merge the device driver responses. Cumulative response
|
|
* passed back in "userdata".
|
|
*/
|
|
|
|
static void eeh_report_error(struct pci_dev *dev, void *userdata)
|
|
{
|
|
enum pci_ers_result rc, *res = userdata;
|
|
struct pci_driver *driver = dev->driver;
|
|
|
|
dev->error_state = pci_channel_io_frozen;
|
|
|
|
if (!driver)
|
|
return;
|
|
|
|
if (irq_in_use (dev->irq)) {
|
|
struct device_node *dn = pci_device_to_OF_node(dev);
|
|
PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
|
|
disable_irq_nosync(dev->irq);
|
|
}
|
|
if (!driver->err_handler ||
|
|
!driver->err_handler->error_detected)
|
|
return;
|
|
|
|
rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
|
|
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
|
|
if (*res == PCI_ERS_RESULT_DISCONNECT &&
|
|
rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
|
|
}
|
|
|
|
/**
|
|
* eeh_report_mmio_enabled - tell drivers that MMIO has been enabled
|
|
*
|
|
* Report an EEH error to each device driver, collect up and
|
|
* merge the device driver responses. Cumulative response
|
|
* passed back in "userdata".
|
|
*/
|
|
|
|
static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
|
|
{
|
|
enum pci_ers_result rc, *res = userdata;
|
|
struct pci_driver *driver = dev->driver;
|
|
|
|
// dev->error_state = pci_channel_mmio_enabled;
|
|
|
|
if (!driver ||
|
|
!driver->err_handler ||
|
|
!driver->err_handler->mmio_enabled)
|
|
return;
|
|
|
|
rc = driver->err_handler->mmio_enabled (dev);
|
|
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
|
|
if (*res == PCI_ERS_RESULT_DISCONNECT &&
|
|
rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
|
|
}
|
|
|
|
/**
|
|
* eeh_report_reset - tell device that slot has been reset
|
|
*/
|
|
|
|
static void eeh_report_reset(struct pci_dev *dev, void *userdata)
|
|
{
|
|
enum pci_ers_result rc, *res = userdata;
|
|
struct pci_driver *driver = dev->driver;
|
|
struct device_node *dn = pci_device_to_OF_node(dev);
|
|
|
|
if (!driver)
|
|
return;
|
|
|
|
if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
|
|
PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
|
|
enable_irq(dev->irq);
|
|
}
|
|
if (!driver->err_handler ||
|
|
!driver->err_handler->slot_reset)
|
|
return;
|
|
|
|
rc = driver->err_handler->slot_reset(dev);
|
|
if ((*res == PCI_ERS_RESULT_NONE) ||
|
|
(*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
|
|
if (*res == PCI_ERS_RESULT_DISCONNECT &&
|
|
rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
|
|
}
|
|
|
|
/**
|
|
* eeh_report_resume - tell device to resume normal operations
|
|
*/
|
|
|
|
static void eeh_report_resume(struct pci_dev *dev, void *userdata)
|
|
{
|
|
struct pci_driver *driver = dev->driver;
|
|
struct device_node *dn = pci_device_to_OF_node(dev);
|
|
|
|
dev->error_state = pci_channel_io_normal;
|
|
|
|
if (!driver)
|
|
return;
|
|
|
|
if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
|
|
PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
|
|
enable_irq(dev->irq);
|
|
}
|
|
if (!driver->err_handler ||
|
|
!driver->err_handler->resume)
|
|
return;
|
|
|
|
driver->err_handler->resume(dev);
|
|
}
|
|
|
|
/**
|
|
* eeh_report_failure - tell device driver that device is dead.
|
|
*
|
|
* This informs the device driver that the device is permanently
|
|
* dead, and that no further recovery attempts will be made on it.
|
|
*/
|
|
|
|
static void eeh_report_failure(struct pci_dev *dev, void *userdata)
|
|
{
|
|
struct pci_driver *driver = dev->driver;
|
|
|
|
dev->error_state = pci_channel_io_perm_failure;
|
|
|
|
if (!driver)
|
|
return;
|
|
|
|
if (irq_in_use (dev->irq)) {
|
|
struct device_node *dn = pci_device_to_OF_node(dev);
|
|
PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
|
|
disable_irq_nosync(dev->irq);
|
|
}
|
|
if (!driver->err_handler)
|
|
return;
|
|
if (!driver->err_handler->error_detected)
|
|
return;
|
|
driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
|
|
}
|
|
|
|
/* ------------------------------------------------------- */
|
|
/**
|
|
* handle_eeh_events -- reset a PCI device after hard lockup.
|
|
*
|
|
* pSeries systems will isolate a PCI slot if the PCI-Host
|
|
* bridge detects address or data parity errors, DMA's
|
|
* occurring to wild addresses (which usually happen due to
|
|
* bugs in device drivers or in PCI adapter firmware).
|
|
* Slot isolations also occur if #SERR, #PERR or other misc
|
|
* PCI-related errors are detected.
|
|
*
|
|
* Recovery process consists of unplugging the device driver
|
|
* (which generated hotplug events to userspace), then issuing
|
|
* a PCI #RST to the device, then reconfiguring the PCI config
|
|
* space for all bridges & devices under this slot, and then
|
|
* finally restarting the device drivers (which cause a second
|
|
* set of hotplug events to go out to userspace).
|
|
*/
|
|
|
|
/**
|
|
* eeh_reset_device() -- perform actual reset of a pci slot
|
|
* @bus: pointer to the pci bus structure corresponding
|
|
* to the isolated slot. A non-null value will
|
|
* cause all devices under the bus to be removed
|
|
* and then re-added.
|
|
* @pe_dn: pointer to a "Partionable Endpoint" device node.
|
|
* This is the top-level structure on which pci
|
|
* bus resets can be performed.
|
|
*/
|
|
|
|
static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
|
|
{
|
|
int cnt, rc;
|
|
|
|
/* pcibios will clear the counter; save the value */
|
|
cnt = pe_dn->eeh_freeze_count;
|
|
|
|
if (bus)
|
|
pcibios_remove_pci_devices(bus);
|
|
|
|
/* Reset the pci controller. (Asserts RST#; resets config space).
|
|
* Reconfigure bridges and devices. Don't try to bring the system
|
|
* up if the reset failed for some reason. */
|
|
rc = rtas_set_slot_reset(pe_dn);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* New-style config addrs might be shared across multiple devices,
|
|
* Walk over all functions on this device */
|
|
if (pe_dn->eeh_pe_config_addr) {
|
|
struct device_node *pe = pe_dn->node;
|
|
pe = pe->parent->child;
|
|
while (pe) {
|
|
struct pci_dn *ppe = PCI_DN(pe);
|
|
if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) {
|
|
rtas_configure_bridge(ppe);
|
|
eeh_restore_bars(ppe);
|
|
}
|
|
pe = pe->sibling;
|
|
}
|
|
} else {
|
|
rtas_configure_bridge(pe_dn);
|
|
eeh_restore_bars(pe_dn);
|
|
}
|
|
|
|
/* Give the system 5 seconds to finish running the user-space
|
|
* hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
|
|
* this is a hack, but if we don't do this, and try to bring
|
|
* the device up before the scripts have taken it down,
|
|
* potentially weird things happen.
|
|
*/
|
|
if (bus) {
|
|
ssleep (5);
|
|
pcibios_add_pci_devices(bus);
|
|
}
|
|
pe_dn->eeh_freeze_count = cnt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The longest amount of time to wait for a pci device
|
|
* to come back on line, in seconds.
|
|
*/
|
|
#define MAX_WAIT_FOR_RECOVERY 150
|
|
|
|
struct pci_dn * handle_eeh_events (struct eeh_event *event)
|
|
{
|
|
struct device_node *frozen_dn;
|
|
struct pci_dn *frozen_pdn;
|
|
struct pci_bus *frozen_bus;
|
|
int rc = 0;
|
|
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
|
|
const char *location, *pci_str, *drv_str;
|
|
|
|
frozen_dn = find_device_pe(event->dn);
|
|
frozen_bus = pcibios_find_pci_bus(frozen_dn);
|
|
|
|
if (!frozen_dn) {
|
|
|
|
location = get_property(event->dn, "ibm,loc-code", NULL);
|
|
location = location ? location : "unknown";
|
|
printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
|
|
"for location=%s pci addr=%s\n",
|
|
location, pci_name(event->dev));
|
|
return NULL;
|
|
}
|
|
location = get_property(frozen_dn, "ibm,loc-code", NULL);
|
|
location = location ? location : "unknown";
|
|
|
|
/* There are two different styles for coming up with the PE.
|
|
* In the old style, it was the highest EEH-capable device
|
|
* which was always an EADS pci bridge. In the new style,
|
|
* there might not be any EADS bridges, and even when there are,
|
|
* the firmware marks them as "EEH incapable". So another
|
|
* two-step is needed to find the pci bus.. */
|
|
if (!frozen_bus)
|
|
frozen_bus = pcibios_find_pci_bus (frozen_dn->parent);
|
|
|
|
if (!frozen_bus) {
|
|
printk(KERN_ERR "EEH: Cannot find PCI bus "
|
|
"for location=%s dn=%s\n",
|
|
location, frozen_dn->full_name);
|
|
return NULL;
|
|
}
|
|
|
|
frozen_pdn = PCI_DN(frozen_dn);
|
|
frozen_pdn->eeh_freeze_count++;
|
|
|
|
if (frozen_pdn->pcidev) {
|
|
pci_str = pci_name (frozen_pdn->pcidev);
|
|
drv_str = pcid_name (frozen_pdn->pcidev);
|
|
} else {
|
|
pci_str = pci_name (event->dev);
|
|
drv_str = pcid_name (event->dev);
|
|
}
|
|
|
|
if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
|
|
goto excess_failures;
|
|
|
|
/* Get the current PCI slot state. */
|
|
rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000);
|
|
if (rc < 0) {
|
|
printk(KERN_WARNING "EEH: Permanent failure\n");
|
|
goto hard_fail;
|
|
}
|
|
|
|
eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
|
|
printk(KERN_WARNING
|
|
"EEH: This PCI device has failed %d times since last reboot: "
|
|
"location=%s driver=%s pci addr=%s\n",
|
|
frozen_pdn->eeh_freeze_count, location, drv_str, pci_str);
|
|
|
|
/* Walk the various device drivers attached to this slot through
|
|
* a reset sequence, giving each an opportunity to do what it needs
|
|
* to accomplish the reset. Each child gets a report of the
|
|
* status ... if any child can't handle the reset, then the entire
|
|
* slot is dlpar removed and added.
|
|
*/
|
|
pci_walk_bus(frozen_bus, eeh_report_error, &result);
|
|
|
|
/* If all device drivers were EEH-unaware, then shut
|
|
* down all of the device drivers, and hope they
|
|
* go down willingly, without panicing the system.
|
|
*/
|
|
if (result == PCI_ERS_RESULT_NONE) {
|
|
rc = eeh_reset_device(frozen_pdn, frozen_bus);
|
|
if (rc) {
|
|
printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
|
|
goto hard_fail;
|
|
}
|
|
}
|
|
|
|
/* If all devices reported they can proceed, then re-enable MMIO */
|
|
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
|
|
rc = rtas_pci_enable(frozen_pdn, EEH_THAW_MMIO);
|
|
|
|
if (rc < 0)
|
|
goto hard_fail;
|
|
if (rc) {
|
|
result = PCI_ERS_RESULT_NEED_RESET;
|
|
} else {
|
|
result = PCI_ERS_RESULT_NONE;
|
|
pci_walk_bus(frozen_bus, eeh_report_mmio_enabled, &result);
|
|
}
|
|
}
|
|
|
|
/* If all devices reported they can proceed, then re-enable DMA */
|
|
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
|
|
rc = rtas_pci_enable(frozen_pdn, EEH_THAW_DMA);
|
|
|
|
if (rc < 0)
|
|
goto hard_fail;
|
|
if (rc)
|
|
result = PCI_ERS_RESULT_NEED_RESET;
|
|
else
|
|
result = PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
/* If any device has a hard failure, then shut off everything. */
|
|
if (result == PCI_ERS_RESULT_DISCONNECT) {
|
|
printk(KERN_WARNING "EEH: Device driver gave up\n");
|
|
goto hard_fail;
|
|
}
|
|
|
|
/* If any device called out for a reset, then reset the slot */
|
|
if (result == PCI_ERS_RESULT_NEED_RESET) {
|
|
rc = eeh_reset_device(frozen_pdn, NULL);
|
|
if (rc) {
|
|
printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
|
|
goto hard_fail;
|
|
}
|
|
result = PCI_ERS_RESULT_NONE;
|
|
pci_walk_bus(frozen_bus, eeh_report_reset, &result);
|
|
}
|
|
|
|
/* All devices should claim they have recovered by now. */
|
|
if ((result != PCI_ERS_RESULT_RECOVERED) &&
|
|
(result != PCI_ERS_RESULT_NONE)) {
|
|
printk(KERN_WARNING "EEH: Not recovered\n");
|
|
goto hard_fail;
|
|
}
|
|
|
|
/* Tell all device drivers that they can resume operations */
|
|
pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
|
|
|
|
return frozen_pdn;
|
|
|
|
excess_failures:
|
|
/*
|
|
* About 90% of all real-life EEH failures in the field
|
|
* are due to poorly seated PCI cards. Only 10% or so are
|
|
* due to actual, failed cards.
|
|
*/
|
|
printk(KERN_ERR
|
|
"EEH: PCI device at location=%s driver=%s pci addr=%s \n"
|
|
"has failed %d times in the last hour "
|
|
"and has been permanently disabled. \n"
|
|
"Please try reseating this device or replacing it.\n",
|
|
location, drv_str, pci_str, frozen_pdn->eeh_freeze_count);
|
|
goto perm_error;
|
|
|
|
hard_fail:
|
|
printk(KERN_ERR
|
|
"EEH: Unable to recover from failure of PCI device "
|
|
"at location=%s driver=%s pci addr=%s \n"
|
|
"Please try reseating this device or replacing it.\n",
|
|
location, drv_str, pci_str);
|
|
|
|
perm_error:
|
|
eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
|
|
|
|
/* Notify all devices that they're about to go down. */
|
|
pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
|
|
|
|
/* Shut down the device drivers for good. */
|
|
pcibios_remove_pci_devices(frozen_bus);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* ---------- end of file ---------- */
|