forked from luck/tmp_suning_uos_patched
8080d54971
Add PCI support for setting PCI from flat device tree on 85xx specifically for MPC8540 ADS. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
97 lines
2.4 KiB
C
97 lines
2.4 KiB
C
/*
|
|
* FSL SoC setup code
|
|
*
|
|
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/prom.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
int mpc85xx_pci2_busno = 0;
|
|
|
|
#ifdef CONFIG_PCI
|
|
int __init add_bridge(struct device_node *dev)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource rsrc;
|
|
int *bus_range;
|
|
int primary = 1, has_address = 0;
|
|
phys_addr_t immr = get_immrbase();
|
|
|
|
DBG("Adding PCI host bridge %s\n", dev->full_name);
|
|
|
|
/* Fetch host bridge registers address */
|
|
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
|
|
|
|
/* Get bus range if any */
|
|
bus_range = (int *) get_property(dev, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", dev->full_name);
|
|
}
|
|
|
|
hose = pcibios_alloc_controller();
|
|
if (!hose)
|
|
return -ENOMEM;
|
|
hose->arch_data = dev;
|
|
hose->set_cfg_type = 1;
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
/* PCI 1 */
|
|
if ((rsrc.start & 0xfffff) == 0x8000) {
|
|
setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004);
|
|
}
|
|
/* PCI 2 */
|
|
if ((rsrc.start & 0xfffff) == 0x9000) {
|
|
setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004);
|
|
primary = 0;
|
|
hose->bus_offset = hose->first_busno;
|
|
mpc85xx_pci2_busno = hose->first_busno;
|
|
}
|
|
|
|
printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%08lx. "
|
|
"Firmware bus number: %d->%d\n",
|
|
rsrc.start, hose->first_busno, hose->last_busno);
|
|
|
|
DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
/* Interpret the "ranges" property */
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
pci_process_bridge_OF_ranges(hose, dev, primary);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|