AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
fd4b9b3650
kernel_optimize_test/arch/m68k/include/asm/atarihw.h
Sam Ravnborg 49148020bc m68k,m68knommu: merge header files 
Merge header files for m68k and m68knommu to the single location:

    arch/m68k/include/asm

The majority of this patch was the result of the
script that is included in the changelog below.

The script was originally written by Arnd Bergman and
exten by me to cover a few more files.

When the header files differed the script uses the following:

The original m68k file is named <file>_mm.h  [mm for memory manager]
The m68knommu file is named <file>_no.h [no for no memory manager]

The files uses the following include guard:

This include gaurd works as the m68knommu toolchain set
the __uClinux__ symbol - so this should work in userspace too.

Merging the header files for m68k and m68knommu exposes the
(unexpected?) ABI differences thus it is easier to actually
identify these and thus to fix them.

The commit has been build tested with both a m68k and
a m68knommu toolchain - with success.

The commit has also been tested with "make headers_check"
and this patch fixes make headers_check for m68knommu.

The script used:
TARGET=arch/m68k/include/asm
SOURCE=arch/m68knommu/include/asm

INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \
linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \
oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \
shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \
termbits.h termios.h tlb.h types.h user.h"

EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \
ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \
sections.h topology.h"

NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \
elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \
m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \
m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \
m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \
mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \
mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \
nettel.h quicc_simple.h smp.h"

FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \
cacheflush.h checksum.h current.h delay.h div64.h \
dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \
irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \
module.h page.h page_offset.h param.h pci.h pgalloc.h \
pgtable.h processor.h ptrace.h scatterlist.h segment.h \
setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \
thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \
unaligned.h unistd.h"

mergefile() {
	BASE=${1%.h}
	git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h
	git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h

cat << EOF > ${TARGET}/$1
EOF

	git add ${TARGET}/$1
}

set -e

mkdir -p ${TARGET}

git mv include/asm-m68k/* ${TARGET}
rmdir include/asm-m68k

git rm ${SOURCE}/Kbuild
for F in $INCLUDE $EQUAL; do
	git rm ${SOURCE}/$F
done

for F in $NOMUUFILES; do
	git mv ${SOURCE}/$F ${TARGET}/$F
done

for F in $FILES ; do
	mergefile $F
done

rmdir arch/m68knommu/include/asm
rmdir arch/m68knommu/include

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-16 21:58:10 +10:00

808 lines
20 KiB
C
Raw Blame History

/*
** linux/atarihw.h -- This header defines some macros and pointers for
** the various Atari custom hardware registers.
**
** Copyright 1994 by Björn Brauel
**
** 5/1/94 Roman Hodek:
** Added definitions for TT specific chips.
**
** 1996-09-13 lars brinkhoff <f93labr@dd.chalmers.se>:
** Finally added definitions for the matrix/codec and the DSP56001 host
** interface.
**
** This file is subject to the terms and conditions of the GNU General Public
** License. See the file COPYING in the main directory of this archive
** for more details.
**
*/
#ifndef _LINUX_ATARIHW_H_
#define _LINUX_ATARIHW_H_
#include <linux/types.h>
#include <asm/bootinfo.h>
#include <asm/raw_io.h>
extern u_long atari_mch_cookie;
extern u_long atari_mch_type;
extern u_long atari_switches;
extern int atari_rtc_year_offset;
extern int atari_dont_touch_floppy_select;
/* convenience macros for testing machine type */
#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST)
#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
(atari_mch_cookie & 0xffff) == 0)
#define MACH_IS_MSTE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
(atari_mch_cookie & 0xffff) == 0x10)
#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT)
#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA)
#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40)
/* values for atari_switches */
#define ATARI_SWITCH_IKBD 0x01
#define ATARI_SWITCH_MIDI 0x02
#define ATARI_SWITCH_SND6 0x04
#define ATARI_SWITCH_SND7 0x08
#define ATARI_SWITCH_OVSC_SHIFT 16
#define ATARI_SWITCH_OVSC_IKBD (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT)
#define ATARI_SWITCH_OVSC_MIDI (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT)
#define ATARI_SWITCH_OVSC_SND6 (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT)
#define ATARI_SWITCH_OVSC_SND7 (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT)
#define ATARI_SWITCH_OVSC_MASK 0xffff0000
/*
* Define several Hardware-Chips for indication so that for the ATARI we do
* no longer decide whether it is a Falcon or other machine . It's just
* important what hardware the machine uses
*/
/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */
#define ATARIHW_DECLARE(name) unsigned name : 1
#define ATARIHW_SET(name) (atari_hw_present.name = 1)
#define ATARIHW_PRESENT(name) (atari_hw_present.name)
struct atari_hw_present {
/* video hardware */
ATARIHW_DECLARE(STND_SHIFTER); /* ST-Shifter - no base low ! */
ATARIHW_DECLARE(EXTD_SHIFTER); /* STe-Shifter - 24 bit address */
ATARIHW_DECLARE(TT_SHIFTER); /* TT-Shifter */
ATARIHW_DECLARE(VIDEL_SHIFTER); /* Falcon-Shifter */
/* sound hardware */
ATARIHW_DECLARE(YM_2149); /* Yamaha YM 2149 */
ATARIHW_DECLARE(PCM_8BIT); /* PCM-Sound in STe-ATARI */
ATARIHW_DECLARE(CODEC); /* CODEC Sound (Falcon) */
/* disk storage interfaces */
ATARIHW_DECLARE(TT_SCSI); /* Directly mapped NCR5380 */
ATARIHW_DECLARE(ST_SCSI); /* NCR5380 via ST-DMA (Falcon) */
ATARIHW_DECLARE(ACSI); /* Standard ACSI like in STs */
ATARIHW_DECLARE(IDE); /* IDE Interface */
ATARIHW_DECLARE(FDCSPEED); /* 8/16 MHz switch for FDC */
/* other I/O hardware */
ATARIHW_DECLARE(ST_MFP); /* The ST-MFP (there should be no Atari
without it... but who knows?) */
ATARIHW_DECLARE(TT_MFP); /* 2nd MFP */
ATARIHW_DECLARE(SCC); /* Serial Communications Contr. */
ATARIHW_DECLARE(ST_ESCC); /* SCC Z83230 in an ST */
ATARIHW_DECLARE(ANALOG_JOY); /* Paddle Interface for STe
and Falcon */
ATARIHW_DECLARE(MICROWIRE); /* Microwire Interface */
/* DMA */
ATARIHW_DECLARE(STND_DMA); /* 24 Bit limited ST-DMA */
ATARIHW_DECLARE(EXTD_DMA); /* 32 Bit ST-DMA */
ATARIHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */
ATARIHW_DECLARE(SCC_DMA); /* DMA for the SCC */
/* real time clocks */
ATARIHW_DECLARE(TT_CLK); /* TT compatible clock chip */
ATARIHW_DECLARE(MSTE_CLK); /* Mega ST(E) clock chip */
/* supporting hardware */
ATARIHW_DECLARE(SCU); /* System Control Unit */
ATARIHW_DECLARE(BLITTER); /* Blitter */
ATARIHW_DECLARE(VME); /* VME Bus */
ATARIHW_DECLARE(DSP56K); /* DSP56k processor in Falcon */
};
extern struct atari_hw_present atari_hw_present;
/* Reading the MFP port register gives a machine independent delay, since the
* MFP always has a 8 MHz clock. This avoids problems with the varying length
* of nops on various machines. Somebody claimed that the tstb takes 600 ns.
*/
#define MFPDELAY() \
__asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
/* Do cache push/invalidate for DMA read/write. This function obeys the
* snooping on some machines (Medusa) and processors: The Medusa itself can
* snoop, but only the '040 can source data from its cache to DMA writes i.e.,
* reads from memory). Both '040 and '060 invalidate cache entries on snooped
* DMA reads (i.e., writes to memory).
*/
#define atari_readb raw_inb
#define atari_writeb raw_outb
#define atari_inb_p raw_inb
#define atari_outb_p raw_outb
#include <linux/mm.h>
#include <asm/cacheflush.h>
static inline void dma_cache_maintenance( unsigned long paddr,
unsigned long len,
int writeflag )
{
if (writeflag) {
if (!MACH_IS_MEDUSA || CPU_IS_060)
cache_push( paddr, len );
}
else {
if (!MACH_IS_MEDUSA)
cache_clear( paddr, len );
}
}
/*
** Shifter
*/
#define ST_LOW 0
#define ST_MID 1
#define ST_HIGH 2
#define TT_LOW 7
#define TT_MID 4
#define TT_HIGH 6
#define SHF_BAS (0xffff8200)
struct SHIFTER
{
u_char pad1;
u_char bas_hi;
u_char pad2;
u_char bas_md;
u_char pad3;
u_char volatile vcounthi;
u_char pad4;
u_char volatile vcountmid;
u_char pad5;
u_char volatile vcountlow;
u_char volatile syncmode;
u_char pad6;
u_char pad7;
u_char bas_lo;
};
# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
#define SHF_FBAS (0xffff820e)
struct SHIFTER_F030
{
u_short off_next;
u_short scn_width;
};
# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS))
#define SHF_TBAS (0xffff8200)
struct SHIFTER_TT {
u_char char_dummy0;
u_char bas_hi; /* video mem base addr, high and mid byte */
u_char char_dummy1;
u_char bas_md;
u_char char_dummy2;
u_char vcount_hi; /* pointer to currently displayed byte */
u_char char_dummy3;
u_char vcount_md;
u_char char_dummy4;
u_char vcount_lo;
u_short st_sync; /* ST compatible sync mode register, unused */
u_char char_dummy5;
u_char bas_lo; /* video mem addr, low byte */
u_char char_dummy6[2+3*16];
/* $ffff8240: */
u_short color_reg[16]; /* 16 color registers */
u_char st_shiftmode; /* ST compatible shift mode register, unused */
u_char char_dummy7;
u_short tt_shiftmode; /* TT shift mode register */
};
#define shifter_tt ((*(volatile struct SHIFTER_TT *)SHF_TBAS))
/* values for shifter_tt->tt_shiftmode */
#define TT_SHIFTER_STLOW 0x0000
#define TT_SHIFTER_STMID 0x0100
#define TT_SHIFTER_STHIGH 0x0200
#define TT_SHIFTER_TTLOW 0x0700
#define TT_SHIFTER_TTMID 0x0400
#define TT_SHIFTER_TTHIGH 0x0600
#define TT_SHIFTER_MODEMASK 0x0700
#define TT_SHIFTER_NUMMODE 0x0008
#define TT_SHIFTER_PALETTE_MASK 0x000f
#define TT_SHIFTER_GRAYMODE 0x1000
/* 256 TT palette registers */
#define TT_PALETTE_BASE (0xffff8400)
#define tt_palette ((volatile u_short *)TT_PALETTE_BASE)
#define TT_PALETTE_RED_MASK 0x0f00
#define TT_PALETTE_GREEN_MASK 0x00f0
#define TT_PALETTE_BLUE_MASK 0x000f
/*
** Falcon030 VIDEL Video Controller
** for description see File 'linux\tools\atari\hardware.txt
*/
#define f030_col ((u_long *) 0xffff9800)
#define f030_xreg ((u_short*) 0xffff8282)
#define f030_yreg ((u_short*) 0xffff82a2)
#define f030_creg ((u_short*) 0xffff82c0)
#define f030_sreg ((u_short*) 0xffff8260)
#define f030_mreg ((u_short*) 0xffff820a)
#define f030_linewidth ((u_short*) 0xffff820e)
#define f030_hscroll ((u_char*) 0xffff8265)
#define VIDEL_BAS (0xffff8260)
struct VIDEL {
u_short st_shift;
u_short pad1;
u_char xoffset_s;
u_char xoffset;
u_short f_shift;
u_char pad2[0x1a];
u_short hht;
u_short hbb;
u_short hbe;
u_short hdb;
u_short hde;
u_short hss;
u_char pad3[0x14];
u_short vft;
u_short vbb;
u_short vbe;
u_short vdb;
u_short vde;
u_short vss;
u_char pad4[0x12];
u_short control;
u_short mode;
};
#define videl ((*(volatile struct VIDEL *)VIDEL_BAS))
/*
** DMA/WD1772 Disk Controller
*/
#define FWD_BAS (0xffff8604)
struct DMA_WD
{
u_short fdc_acces_seccount;
u_short dma_mode_status;
u_char dma_vhi; /* Some extended ST-DMAs can handle 32 bit addresses */
u_char dma_hi;
u_char char_dummy2;
u_char dma_md;
u_char char_dummy3;
u_char dma_lo;
u_short fdc_speed;
};
# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS))
/* alias */
#define st_dma dma_wd
/* The two highest bytes of an extended DMA as a short; this is a must
* for the Medusa.
*/
#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608))
/*
** YM2149 Sound Chip
** access in bytes
*/
#define YM_BAS (0xffff8800)
struct SOUND_YM
{
u_char rd_data_reg_sel;
u_char char_dummy1;
u_char wd_data;
};
#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS))
/* TT SCSI DMA */
#define TT_SCSI_DMA_BAS (0xffff8700)
struct TT_DMA {
u_char char_dummy0;
u_char dma_addr_hi;
u_char char_dummy1;
u_char dma_addr_hmd;
u_char char_dummy2;
u_char dma_addr_lmd;
u_char char_dummy3;
u_char dma_addr_lo;
u_char char_dummy4;
u_char dma_cnt_hi;
u_char char_dummy5;
u_char dma_cnt_hmd;
u_char char_dummy6;
u_char dma_cnt_lmd;
u_char char_dummy7;
u_char dma_cnt_lo;
u_long dma_restdata;
u_short dma_ctrl;
};
#define tt_scsi_dma ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS))
/* TT SCSI Controller 5380 */
#define TT_5380_BAS (0xffff8781)
struct TT_5380 {
u_char scsi_data;
u_char char_dummy1;
u_char scsi_icr;
u_char char_dummy2;
u_char scsi_mode;
u_char char_dummy3;
u_char scsi_tcr;
u_char char_dummy4;
u_char scsi_idstat;
u_char char_dummy5;
u_char scsi_dmastat;
u_char char_dummy6;
u_char scsi_targrcv;
u_char char_dummy7;
u_char scsi_inircv;
};
#define tt_scsi ((*(volatile struct TT_5380 *)TT_5380_BAS))
#define tt_scsi_regp ((volatile char *)TT_5380_BAS)
/*
** Falcon DMA Sound Subsystem
*/
#define MATRIX_BASE (0xffff8930)
struct MATRIX
{
u_short source;
u_short destination;
u_char external_frequency_divider;
u_char internal_frequency_divider;
};
#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE)
#define CODEC_BASE (0xffff8936)
struct CODEC
{
u_char tracks;
u_char input_source;
#define CODEC_SOURCE_ADC 1
#define CODEC_SOURCE_MATRIX 2
u_char adc_source;
#define ADC_SOURCE_RIGHT_PSG 1
#define ADC_SOURCE_LEFT_PSG 2
u_char gain;
#define CODEC_GAIN_RIGHT 0x0f
#define CODEC_GAIN_LEFT 0xf0
u_char attenuation;
#define CODEC_ATTENUATION_RIGHT 0x0f
#define CODEC_ATTENUATION_LEFT 0xf0
u_char unused1;
u_char status;
#define CODEC_OVERFLOW_RIGHT 1
#define CODEC_OVERFLOW_LEFT 2
u_char unused2, unused3, unused4, unused5;
u_char gpio_directions;
#define GPIO_IN 0
#define GPIO_OUT 1
u_char unused6;
u_char gpio_data;
};
#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE)
/*
** Falcon Blitter
*/
#define BLT_BAS (0xffff8a00)
struct BLITTER
{
u_short halftone[16];
u_short src_x_inc;
u_short src_y_inc;
u_long src_address;
u_short endmask1;
u_short endmask2;
u_short endmask3;
u_short dst_x_inc;
u_short dst_y_inc;
u_long dst_address;
u_short wd_per_line;
u_short ln_per_bb;
u_short hlf_op_reg;
u_short log_op_reg;
u_short lin_nm_reg;
u_short skew_reg;
};
# define blitter ((*(volatile struct BLITTER *)BLT_BAS))
/*
** SCC Z8530
*/
#define SCC_BAS (0xffff8c81)
struct SCC
{
u_char cha_a_ctrl;
u_char char_dummy1;
u_char cha_a_data;
u_char char_dummy2;
u_char cha_b_ctrl;
u_char char_dummy3;
u_char cha_b_data;
};
# define scc ((*(volatile struct SCC*)SCC_BAS))
/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
# define st_escc ((*(volatile struct SCC*)0xfffffa31))
# define st_escc_dsr ((*(volatile char *)0xfffffa39))
/* TT SCC DMA Controller (same chip as SCSI DMA) */
#define TT_SCC_DMA_BAS (0xffff8c00)
#define tt_scc_dma ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS))
/*
** VIDEL Palette Register
*/
#define FPL_BAS (0xffff9800)
struct VIDEL_PALETTE
{
u_long reg[256];
};
# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS))
/*
** Falcon DSP Host Interface
*/
#define DSP56K_HOST_INTERFACE_BASE (0xffffa200)
struct DSP56K_HOST_INTERFACE {
u_char icr;
#define DSP56K_ICR_RREQ 0x01
#define DSP56K_ICR_TREQ 0x02
#define DSP56K_ICR_HF0 0x08
#define DSP56K_ICR_HF1 0x10
#define DSP56K_ICR_HM0 0x20
#define DSP56K_ICR_HM1 0x40
#define DSP56K_ICR_INIT 0x80
u_char cvr;
#define DSP56K_CVR_HV_MASK 0x1f
#define DSP56K_CVR_HC 0x80
u_char isr;
#define DSP56K_ISR_RXDF 0x01
#define DSP56K_ISR_TXDE 0x02
#define DSP56K_ISR_TRDY 0x04
#define DSP56K_ISR_HF2 0x08
#define DSP56K_ISR_HF3 0x10
#define DSP56K_ISR_DMA 0x40
#define DSP56K_ISR_HREQ 0x80
u_char ivr;
union {
u_char b[4];
u_short w[2];
u_long l;
} data;
};
#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE))
/*
** MFP 68901
*/
#define MFP_BAS (0xfffffa01)
struct MFP
{
u_char par_dt_reg;
u_char char_dummy1;
u_char active_edge;
u_char char_dummy2;
u_char data_dir;
u_char char_dummy3;
u_char int_en_a;
u_char char_dummy4;
u_char int_en_b;
u_char char_dummy5;
u_char int_pn_a;
u_char char_dummy6;
u_char int_pn_b;
u_char char_dummy7;
u_char int_sv_a;
u_char char_dummy8;
u_char int_sv_b;
u_char char_dummy9;
u_char int_mk_a;
u_char char_dummy10;
u_char int_mk_b;
u_char char_dummy11;
u_char vec_adr;
u_char char_dummy12;
u_char tim_ct_a;
u_char char_dummy13;
u_char tim_ct_b;
u_char char_dummy14;
u_char tim_ct_cd;
u_char char_dummy15;
u_char tim_dt_a;
u_char char_dummy16;
u_char tim_dt_b;
u_char char_dummy17;
u_char tim_dt_c;
u_char char_dummy18;
u_char tim_dt_d;
u_char char_dummy19;
u_char sync_char;
u_char char_dummy20;
u_char usart_ctr;
u_char char_dummy21;
u_char rcv_stat;
u_char char_dummy22;
u_char trn_stat;
u_char char_dummy23;
u_char usart_dta;
};
# define mfp ((*(volatile struct MFP*)MFP_BAS))
/* TT's second MFP */
#define TT_MFP_BAS (0xfffffa81)
# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS))
/* TT System Control Unit */
#define TT_SCU_BAS (0xffff8e01)
struct TT_SCU {
u_char sys_mask;
u_char char_dummy1;
u_char sys_stat;
u_char char_dummy2;
u_char softint;
u_char char_dummy3;
u_char vmeint;
u_char char_dummy4;
u_char gp_reg1;
u_char char_dummy5;
u_char gp_reg2;
u_char char_dummy6;
u_char vme_mask;
u_char char_dummy7;
u_char vme_stat;
};
#define tt_scu ((*(volatile struct TT_SCU *)TT_SCU_BAS))
/* TT real time clock */
#define TT_RTC_BAS (0xffff8961)
struct TT_RTC {
u_char regsel;
u_char dummy;
u_char data;
};
#define tt_rtc ((*(volatile struct TT_RTC *)TT_RTC_BAS))
/*
** ACIA 6850
*/
/* constants for the ACIA registers */
/* baudrate selection and reset (Baudrate = clock/factor) */
#define ACIA_DIV1 0
#define ACIA_DIV16 1
#define ACIA_DIV64 2
#define ACIA_RESET 3
/* character format */
#define ACIA_D7E2S (0<<2) /* 7 data, even parity, 2 stop */
#define ACIA_D7O2S (1<<2) /* 7 data, odd parity, 2 stop */
#define ACIA_D7E1S (2<<2) /* 7 data, even parity, 1 stop */
#define ACIA_D7O1S (3<<2) /* 7 data, odd parity, 1 stop */
#define ACIA_D8N2S (4<<2) /* 8 data, no parity, 2 stop */
#define ACIA_D8N1S (5<<2) /* 8 data, no parity, 1 stop */
#define ACIA_D8E1S (6<<2) /* 8 data, even parity, 1 stop */
#define ACIA_D8O1S (7<<2) /* 8 data, odd parity, 1 stop */
/* transmit control */
#define ACIA_RLTID (0<<5) /* RTS low, TxINT disabled */
#define ACIA_RLTIE (1<<5) /* RTS low, TxINT enabled */
#define ACIA_RHTID (2<<5) /* RTS high, TxINT disabled */
#define ACIA_RLTIDSB (3<<5) /* RTS low, TxINT disabled, send break */
/* receive control */
#define ACIA_RID (0<<7) /* RxINT disabled */
#define ACIA_RIE (1<<7) /* RxINT enabled */
/* status fields of the ACIA */
#define ACIA_RDRF 1 /* Receive Data Register Full */
#define ACIA_TDRE (1<<1) /* Transmit Data Register Empty */
#define ACIA_DCD (1<<2) /* Data Carrier Detect */
#define ACIA_CTS (1<<3) /* Clear To Send */
#define ACIA_FE (1<<4) /* Framing Error */
#define ACIA_OVRN (1<<5) /* Receiver Overrun */
#define ACIA_PE (1<<6) /* Parity Error */
#define ACIA_IRQ (1<<7) /* Interrupt Request */
#define ACIA_BAS (0xfffffc00)
struct ACIA
{
u_char key_ctrl;
u_char char_dummy1;
u_char key_data;
u_char char_dummy2;
u_char mid_ctrl;
u_char char_dummy3;
u_char mid_data;
};
# define acia ((*(volatile struct ACIA*)ACIA_BAS))
#define TT_DMASND_BAS (0xffff8900)
struct TT_DMASND {
u_char int_ctrl; /* Falcon: Interrupt control */
u_char ctrl;
u_char pad2;
u_char bas_hi;
u_char pad3;
u_char bas_mid;
u_char pad4;
u_char bas_low;
u_char pad5;
u_char addr_hi;
u_char pad6;
u_char addr_mid;
u_char pad7;
u_char addr_low;
u_char pad8;
u_char end_hi;
u_char pad9;
u_char end_mid;
u_char pad10;
u_char end_low;
u_char pad11[12];
u_char track_select; /* Falcon */
u_char mode;
u_char pad12[14];
/* Falcon only: */
u_short cbar_src;
u_short cbar_dst;
u_char ext_div;
u_char int_div;
u_char rec_track_select;
u_char dac_src;
u_char adc_src;
u_char input_gain;
u_short output_atten;
};
# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS))
#define DMASND_MFP_INT_REPLAY 0x01
#define DMASND_MFP_INT_RECORD 0x02
#define DMASND_TIMERA_INT_REPLAY 0x04
#define DMASND_TIMERA_INT_RECORD 0x08
#define DMASND_CTRL_OFF 0x00
#define DMASND_CTRL_ON 0x01
#define DMASND_CTRL_REPEAT 0x02
#define DMASND_CTRL_RECORD_ON 0x10
#define DMASND_CTRL_RECORD_OFF 0x00
#define DMASND_CTRL_RECORD_REPEAT 0x20
#define DMASND_CTRL_SELECT_REPLAY 0x00
#define DMASND_CTRL_SELECT_RECORD 0x80
#define DMASND_MODE_MONO 0x80
#define DMASND_MODE_STEREO 0x00
#define DMASND_MODE_8BIT 0x00
#define DMASND_MODE_16BIT 0x40 /* Falcon only */
#define DMASND_MODE_6KHZ 0x00 /* Falcon: mute */
#define DMASND_MODE_12KHZ 0x01
#define DMASND_MODE_25KHZ 0x02
#define DMASND_MODE_50KHZ 0x03
#define DMASNDSetBase(bufstart) \
do { \
tt_dmasnd.bas_hi = (unsigned char)(((bufstart) & 0xff0000) >> 16); \
tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \
tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \
} while( 0 )
#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) + \
(tt_dmasnd.addr_mid << 8) + \
(tt_dmasnd.addr_low))
#define DMASNDSetEnd(bufend) \
do { \
tt_dmasnd.end_hi = (unsigned char)(((bufend) & 0xff0000) >> 16); \
tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \
tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \
} while( 0 )
#define TT_MICROWIRE_BAS (0xffff8922)
struct TT_MICROWIRE {
u_short data;
u_short mask;
};
# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS))
#define MW_LM1992_ADDR 0x0400
#define MW_LM1992_VOLUME(dB) \
(0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2)))
#define MW_LM1992_BALLEFT(dB) \
(0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
#define MW_LM1992_BALRIGHT(dB) \
(0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
#define MW_LM1992_TREBLE(dB) \
(0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
#define MW_LM1992_BASS(dB) \
(0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
#define MW_LM1992_PSG_LOW 0x000
#define MW_LM1992_PSG_HIGH 0x001
#define MW_LM1992_PSG_OFF 0x002
#define MSTE_RTC_BAS (0xfffffc21)
struct MSTE_RTC {
u_char sec_ones;
u_char dummy1;
u_char sec_tens;
u_char dummy2;
u_char min_ones;
u_char dummy3;
u_char min_tens;
u_char dummy4;
u_char hr_ones;
u_char dummy5;
u_char hr_tens;
u_char dummy6;
u_char weekday;
u_char dummy7;
u_char day_ones;
u_char dummy8;
u_char day_tens;
u_char dummy9;
u_char mon_ones;
u_char dummy10;
u_char mon_tens;
u_char dummy11;
u_char year_ones;
u_char dummy12;
u_char year_tens;
u_char dummy13;
u_char mode;
u_char dummy14;
u_char test;
u_char dummy15;
u_char reset;
};
#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
#endif /* linux/atarihw.h */
View Git Blame Copy Permalink