AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
fe1c445b60
kernel_optimize_test/arch/mips/kernel/unaligned.c
Paul Burton e70ac023f9 MIPS: Allow emulation for unaligned [LS]DXC1 instructions 
If an address error exception occurs for a LDXC1 or SDXC1 instruction,
within the cop1x opcode space, allow it to be passed through to the FPU
emulator rather than resulting in a SIGILL. This causes LDXC1 & SDXC1 to
be handled in a manner consistent with the more common LDC1 & SDC1
instructions.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13143/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 15:30:25 +02:00

2327 lines
60 KiB
C
Raw Blame History

/*
* Handle unaligned accesses by emulation.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
* Copyright (C) 1999 Silicon Graphics, Inc.
* Copyright (C) 2014 Imagination Technologies Ltd.
*
* This file contains exception handler for address error exception with the
* special capability to execute faulting instructions in software. The
* handler does not try to handle the case when the program counter points
* to an address not aligned to a word boundary.
*
* Putting data to unaligned addresses is a bad practice even on Intel where
* only the performance is affected. Much worse is that such code is non-
* portable. Due to several programs that die on MIPS due to alignment
* problems I decided to implement this handler anyway though I originally
* didn't intend to do this at all for user code.
*
* For now I enable fixing of address errors by default to make life easier.
* I however intend to disable this somewhen in the future when the alignment
* problems with user programs have been fixed. For programmers this is the
* right way to go.
*
* Fixing address errors is a per process option. The option is inherited
* across fork(2) and execve(2) calls. If you really want to use the
* option in your user programs - I discourage the use of the software
* emulation strongly - use the following code in your userland stuff:
*
* #include <sys/sysmips.h>
*
* ...
* sysmips(MIPS_FIXADE, x);
* ...
*
* The argument x is 0 for disabling software emulation, enabled otherwise.
*
* Below a little program to play around with this feature.
*
* #include <stdio.h>
* #include <sys/sysmips.h>
*
* struct foo {
* unsigned char bar[8];
* };
*
* main(int argc, char *argv[])
* {
* struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
* unsigned int *p = (unsigned int *) (x.bar + 3);
* int i;
*
* if (argc > 1)
* sysmips(MIPS_FIXADE, atoi(argv[1]));
*
* printf("*p = %08lx\n", *p);
*
* *p = 0xdeadface;
*
* for(i = 0; i <= 7; i++)
* printf("%02x ", x.bar[i]);
* printf("\n");
* }
*
* Coprocessor loads are not supported; I think this case is unimportant
* in the practice.
*
* TODO: Handle ndc (attempted store to doubleword in uncached memory)
* exception for the R6000.
* A store crossing a page boundary might be executed only partially.
* Undo the partial store in this case.
*/
#include <linux/context_tracking.h>
#include <linux/mm.h>
#include <linux/signal.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/debugfs.h>
#include <linux/perf_event.h>
#include <asm/asm.h>
#include <asm/branch.h>
#include <asm/byteorder.h>
#include <asm/cop2.h>
#include <asm/debug.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/inst.h>
#include <asm/uaccess.h>
#define STR(x) __STR(x)
#define __STR(x) #x
enum {
UNALIGNED_ACTION_QUIET,
UNALIGNED_ACTION_SIGNAL,
UNALIGNED_ACTION_SHOW,
};
#ifdef CONFIG_DEBUG_FS
static u32 unaligned_instructions;
static u32 unaligned_action;
#else
#define unaligned_action UNALIGNED_ACTION_QUIET
#endif
extern void show_registers(struct pt_regs *regs);
#ifdef __BIG_ENDIAN
#define _LoadHW(addr, value, res, type) \
do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "0(%2)")"\n" \
"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
"3:\t.set\tat\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
"1:"type##_lb("%0", "0(%2)")"\n\t" \
"2:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"3:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"4:"type##_lbu("$1", "3(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
".set\tpop\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%1, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "0(%2)")"\n" \
"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
".set\tat\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
"dsll\t%0, %0, 32\n\t" \
"dsrl\t%0, %0, 32\n\t" \
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
"\t.section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#define _LoadDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, (%2)\n" \
"2:\tldr\t%0, 7(%2)\n\t" \
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
"\t.section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:"type##_lbu("%0", "0(%2)")"\n\t" \
"2:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"3:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"4:"type##_lbu("$1", "3(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
".set\tpop\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%1, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#define _LoadDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:lb\t%0, 0(%2)\n\t" \
"2:lbu\t $1, 1(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"3:lbu\t$1, 2(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"4:lbu\t$1, 3(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"5:lbu\t$1, 4(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"6:lbu\t$1, 5(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"7:lbu\t$1, 6(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"8:lbu\t$1, 7(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
".set\tpop\n\t" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%1, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
STR(PTR)"\t5b, 11b\n\t" \
STR(PTR)"\t6b, 11b\n\t" \
STR(PTR)"\t7b, 11b\n\t" \
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "1(%2)")"\n" \
"srl\t$1, %1, 0x8\n" \
"2:\t"type##_sb("$1", "0(%2)")"\n" \
".set\tat\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%0, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "(%2)")"\n" \
"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%0, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
#define _StoreDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1,(%2)\n" \
"2:\tsdr\t%1, 7(%2)\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%0, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:"type##_sb("%1", "3(%2)")"\n\t" \
"srl\t$1, %1, 0x8\n\t" \
"2:"type##_sb("$1", "2(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
"3:"type##_sb("$1", "1(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
"4:"type##_sb("$1", "0(%2)")"\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%0, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
: "memory"); \
} while(0)
#define _StoreDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:sb\t%1, 7(%2)\n\t" \
"dsrl\t$1, %1, 0x8\n\t" \
"2:sb\t$1, 6(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"3:sb\t$1, 5(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"4:sb\t$1, 4(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"5:sb\t$1, 3(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"6:sb\t$1, 2(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"7:sb\t$1, 1(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"8:sb\t$1, 0(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%0, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
STR(PTR)"\t5b, 11b\n\t" \
STR(PTR)"\t6b, 11b\n\t" \
STR(PTR)"\t7b, 11b\n\t" \
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
: "memory"); \
} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#else /* __BIG_ENDIAN */
#define _LoadHW(addr, value, res, type) \
do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "1(%2)")"\n" \
"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
"3:\t.set\tat\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
"1:"type##_lb("%0", "3(%2)")"\n\t" \
"2:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"3:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"4:"type##_lbu("$1", "0(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
".set\tpop\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%1, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "1(%2)")"\n" \
"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
".set\tat\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
"dsll\t%0, %0, 32\n\t" \
"dsrl\t%0, %0, 32\n\t" \
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
"\t.section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#define _LoadDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, 7(%2)\n" \
"2:\tldr\t%0, (%2)\n\t" \
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
"\t.section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%1, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:"type##_lbu("%0", "3(%2)")"\n\t" \
"2:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"3:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"4:"type##_lbu("$1", "0(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
".set\tpop\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%1, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#define _LoadDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:lb\t%0, 7(%2)\n\t" \
"2:lbu\t$1, 6(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"3:lbu\t$1, 5(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"4:lbu\t$1, 4(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"5:lbu\t$1, 3(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"6:lbu\t$1, 2(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"7:lbu\t$1, 1(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"8:lbu\t$1, 0(%2)\n\t" \
"dsll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
".set\tpop\n\t" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%1, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
STR(PTR)"\t5b, 11b\n\t" \
STR(PTR)"\t6b, 11b\n\t" \
STR(PTR)"\t7b, 11b\n\t" \
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "0(%2)")"\n" \
"srl\t$1,%1, 0x8\n" \
"2:\t"type##_sb("$1", "1(%2)")"\n" \
".set\tat\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%0, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "3(%2)")"\n" \
"2:\t"type##_swr("%1", "(%2)")"\n\t"\
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%0, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
#define _StoreDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1, 7(%2)\n" \
"2:\tsdr\t%1, (%2)\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"4:\tli\t%0, %3\n\t" \
"j\t3b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 4b\n\t" \
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:"type##_sb("%1", "0(%2)")"\n\t" \
"srl\t$1, %1, 0x8\n\t" \
"2:"type##_sb("$1", "1(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
"3:"type##_sb("$1", "2(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
"4:"type##_sb("$1", "3(%2)")"\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%0, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
: "memory"); \
} while(0)
#define _StoreDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
"1:sb\t%1, 0(%2)\n\t" \
"dsrl\t$1, %1, 0x8\n\t" \
"2:sb\t$1, 1(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"3:sb\t$1, 2(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"4:sb\t$1, 3(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"5:sb\t$1, 4(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"6:sb\t$1, 5(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"7:sb\t$1, 6(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
"8:sb\t$1, 7(%2)\n\t" \
"dsrl\t$1, $1, 0x8\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
".insn\n\t" \
".section\t.fixup,\"ax\"\n\t" \
"11:\tli\t%0, %3\n\t" \
"j\t10b\n\t" \
".previous\n\t" \
".section\t__ex_table,\"a\"\n\t" \
STR(PTR)"\t1b, 11b\n\t" \
STR(PTR)"\t2b, 11b\n\t" \
STR(PTR)"\t3b, 11b\n\t" \
STR(PTR)"\t4b, 11b\n\t" \
STR(PTR)"\t5b, 11b\n\t" \
STR(PTR)"\t6b, 11b\n\t" \
STR(PTR)"\t7b, 11b\n\t" \
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
: "memory"); \
} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#endif
#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user)
#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel)
#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user)
#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel)
#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user)
#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel)
#define LoadWE(addr, value, res) _LoadW(addr, value, res, user)
#define LoadDW(addr, value, res) _LoadDW(addr, value, res)
#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel)
#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user)
#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel)
#define StoreWE(addr, value, res) _StoreW(addr, value, res, user)
#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
static void emulate_load_store_insn(struct pt_regs *regs,
void __user *addr, unsigned int __user *pc)
{
union mips_instruction insn;
unsigned long value;
unsigned int res, preempted;
unsigned long origpc;
unsigned long orig31;
void __user *fault_addr = NULL;
#ifdef CONFIG_EVA
mm_segment_t seg;
#endif
union fpureg *fpr;
enum msa_2b_fmt df;
unsigned int wd;
origpc = (unsigned long)pc;
orig31 = regs->regs[31];
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
/*
* This load never faults.
*/
__get_user(insn.word, pc);
switch (insn.i_format.opcode) {
/*
* These are instructions that a compiler doesn't generate. We
* can assume therefore that the code is MIPS-aware and
* really buggy. Emulating these instructions would break the
* semantics anyway.
*/
case ll_op:
case lld_op:
case sc_op:
case scd_op:
/*
* For these instructions the only way to create an address
* error is an attempted access to kernel/supervisor address
* space.
*/
case ldl_op:
case ldr_op:
case lwl_op:
case lwr_op:
case sdl_op:
case sdr_op:
case swl_op:
case swr_op:
case lb_op:
case lbu_op:
case sb_op:
goto sigbus;
/*
* The remaining opcodes are the ones that are really of
* interest.
*/
#ifdef CONFIG_EVA
case spec3_op:
/*
* we can land here only from kernel accessing user memory,
* so we need to "switch" the address limit to user space, so
* address check can work properly.
*/
seg = get_fs();
set_fs(USER_DS);
switch (insn.spec3_format.func) {
case lhe_op:
if (!access_ok(VERIFY_READ, addr, 2)) {
set_fs(seg);
goto sigbus;
}
LoadHWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
}
compute_return_epc(regs);
regs->regs[insn.spec3_format.rt] = value;
break;
case lwe_op:
if (!access_ok(VERIFY_READ, addr, 4)) {
set_fs(seg);
goto sigbus;
}
LoadWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
}
compute_return_epc(regs);
regs->regs[insn.spec3_format.rt] = value;
break;
case lhue_op:
if (!access_ok(VERIFY_READ, addr, 2)) {
set_fs(seg);
goto sigbus;
}
LoadHWUE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
}
compute_return_epc(regs);
regs->regs[insn.spec3_format.rt] = value;
break;
case she_op:
if (!access_ok(VERIFY_WRITE, addr, 2)) {
set_fs(seg);
goto sigbus;
}
compute_return_epc(regs);
value = regs->regs[insn.spec3_format.rt];
StoreHWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
}
break;
case swe_op:
if (!access_ok(VERIFY_WRITE, addr, 4)) {
set_fs(seg);
goto sigbus;
}
compute_return_epc(regs);
value = regs->regs[insn.spec3_format.rt];
StoreWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
}
break;
default:
set_fs(seg);
goto sigill;
}
set_fs(seg);
break;
#endif
case lh_op:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
if (config_enabled(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
LoadHW(addr, value, res);
else
LoadHWE(addr, value, res);
} else {
LoadHW(addr, value, res);
}
if (res)
goto fault;
compute_return_epc(regs);
regs->regs[insn.i_format.rt] = value;
break;
case lw_op:
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
if (config_enabled(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
LoadW(addr, value, res);
else
LoadWE(addr, value, res);
} else {
LoadW(addr, value, res);
}
if (res)
goto fault;
compute_return_epc(regs);
regs->regs[insn.i_format.rt] = value;
break;
case lhu_op:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
if (config_enabled(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
LoadHWU(addr, value, res);
else
LoadHWUE(addr, value, res);
} else {
LoadHWU(addr, value, res);
}
if (res)
goto fault;
compute_return_epc(regs);
regs->regs[insn.i_format.rt] = value;
break;
case lwu_op:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
LoadWU(addr, value, res);
if (res)
goto fault;
compute_return_epc(regs);
regs->regs[insn.i_format.rt] = value;
break;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
case ld_op:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_READ, addr, 8))
goto sigbus;
LoadDW(addr, value, res);
if (res)
goto fault;
compute_return_epc(regs);
regs->regs[insn.i_format.rt] = value;
break;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
case sh_op:
if (!access_ok(VERIFY_WRITE, addr, 2))
goto sigbus;
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
if (config_enabled(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
StoreHW(addr, value, res);
else
StoreHWE(addr, value, res);
} else {
StoreHW(addr, value, res);
}
if (res)
goto fault;
break;
case sw_op:
if (!access_ok(VERIFY_WRITE, addr, 4))
goto sigbus;
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
if (config_enabled(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
StoreW(addr, value, res);
else
StoreWE(addr, value, res);
} else {
StoreW(addr, value, res);
}
if (res)
goto fault;
break;
case sd_op:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_WRITE, addr, 8))
goto sigbus;
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
StoreDW(addr, value, res);
if (res)
goto fault;
break;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
case lwc1_op:
case ldc1_op:
case swc1_op:
case sdc1_op:
case cop1x_op:
die_if_kernel("Unaligned FP access in kernel code", regs);
BUG_ON(!used_math());
lose_fpu(1); /* Save FPU state for the emulator. */
res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
own_fpu(1); /* Restore FPU state. */
/* Signal if something went wrong. */
process_fpemu_return(res, fault_addr, 0);
if (res == 0)
break;
return;
case msa_op:
if (!cpu_has_msa)
goto sigill;
/*
* If we've reached this point then userland should have taken
* the MSA disabled exception & initialised vector context at
* some point in the past.
*/
BUG_ON(!thread_msa_context_live());
df = insn.msa_mi10_format.df;
wd = insn.msa_mi10_format.wd;
fpr = &current->thread.fpu.fpr[wd];
switch (insn.msa_mi10_format.func) {
case msa_ld_op:
if (!access_ok(VERIFY_READ, addr, sizeof(*fpr)))
goto sigbus;
do {
/*
* If we have live MSA context keep track of
* whether we get preempted in order to avoid
* the register context we load being clobbered
* by the live context as it's saved during
* preemption. If we don't have live context
* then it can't be saved to clobber the value
* we load.
*/
preempted = test_thread_flag(TIF_USEDMSA);
res = __copy_from_user_inatomic(fpr, addr,
sizeof(*fpr));
if (res)
goto fault;
/*
* Update the hardware register if it is in use
* by the task in this quantum, in order to
* avoid having to save & restore the whole
* vector context.
*/
preempt_disable();
if (test_thread_flag(TIF_USEDMSA)) {
write_msa_wr(wd, fpr, df);
preempted = 0;
}
preempt_enable();
} while (preempted);
break;
case msa_st_op:
if (!access_ok(VERIFY_WRITE, addr, sizeof(*fpr)))
goto sigbus;
/*
* Update from the hardware register if it is in use by
* the task in this quantum, in order to avoid having to
* save & restore the whole vector context.
*/
preempt_disable();
if (test_thread_flag(TIF_USEDMSA))
read_msa_wr(wd, fpr, df);
preempt_enable();
res = __copy_to_user_inatomic(addr, fpr, sizeof(*fpr));
if (res)
goto fault;
break;
default:
goto sigbus;
}
compute_return_epc(regs);
break;
#ifndef CONFIG_CPU_MIPSR6
/*
* COP2 is available to implementor for application specific use.
* It's up to applications to register a notifier chain and do
* whatever they have to do, including possible sending of signals.
*
* This instruction has been reallocated in Release 6
*/
case lwc2_op:
cu2_notifier_call_chain(CU2_LWC2_OP, regs);
break;
case ldc2_op:
cu2_notifier_call_chain(CU2_LDC2_OP, regs);
break;
case swc2_op:
cu2_notifier_call_chain(CU2_SWC2_OP, regs);
break;
case sdc2_op:
cu2_notifier_call_chain(CU2_SDC2_OP, regs);
break;
#endif
default:
/*
* Pheeee... We encountered an yet unknown instruction or
* cache coherence problem. Die sucker, die ...
*/
goto sigill;
}
#ifdef CONFIG_DEBUG_FS
unaligned_instructions++;
#endif
return;
fault:
/* roll back jump/branch */
regs->cp0_epc = origpc;
regs->regs[31] = orig31;
/* Did we have an exception handler installed? */
if (fixup_exception(regs))
return;
die_if_kernel("Unhandled kernel unaligned access", regs);
force_sig(SIGSEGV, current);
return;
sigbus:
die_if_kernel("Unhandled kernel unaligned access", regs);
force_sig(SIGBUS, current);
return;
sigill:
die_if_kernel
("Unhandled kernel unaligned access or invalid instruction", regs);
force_sig(SIGILL, current);
}
/* Recode table from 16-bit register notation to 32-bit GPR. */
const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
/* Recode table from 16-bit STORE register notation to 32-bit GPR. */
const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
static void emulate_load_store_microMIPS(struct pt_regs *regs,
void __user *addr)
{
unsigned long value;
unsigned int res;
int i;
unsigned int reg = 0, rvar;
unsigned long orig31;
u16 __user *pc16;
u16 halfword;
unsigned int word;
unsigned long origpc, contpc;
union mips_instruction insn;
struct mm_decoded_insn mminsn;
void __user *fault_addr = NULL;
origpc = regs->cp0_epc;
orig31 = regs->regs[31];
mminsn.micro_mips_mode = 1;
/*
* This load never faults.
*/
pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
__get_user(halfword, pc16);
pc16++;
contpc = regs->cp0_epc + 2;
word = ((unsigned int)halfword << 16);
mminsn.pc_inc = 2;
if (!mm_insn_16bit(halfword)) {
__get_user(halfword, pc16);
pc16++;
contpc = regs->cp0_epc + 4;
mminsn.pc_inc = 4;
word |= halfword;
}
mminsn.insn = word;
if (get_user(halfword, pc16))
goto fault;
mminsn.next_pc_inc = 2;
word = ((unsigned int)halfword << 16);
if (!mm_insn_16bit(halfword)) {
pc16++;
if (get_user(halfword, pc16))
goto fault;
mminsn.next_pc_inc = 4;
word |= halfword;
}
mminsn.next_insn = word;
insn = (union mips_instruction)(mminsn.insn);
if (mm_isBranchInstr(regs, mminsn, &contpc))
insn = (union mips_instruction)(mminsn.next_insn);
/* Parse instruction to find what to do */
switch (insn.mm_i_format.opcode) {
case mm_pool32a_op:
switch (insn.mm_x_format.func) {
case mm_lwxs_op:
reg = insn.mm_x_format.rd;
goto loadW;
}
goto sigbus;
case mm_pool32b_op:
switch (insn.mm_m_format.func) {
case mm_lwp_func:
reg = insn.mm_m_format.rd;
if (reg == 31)
goto sigbus;
if (!access_ok(VERIFY_READ, addr, 8))
goto sigbus;
LoadW(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
addr += 4;
LoadW(addr, value, res);
if (res)
goto fault;
regs->regs[reg + 1] = value;
goto success;
case mm_swp_func:
reg = insn.mm_m_format.rd;
if (reg == 31)
goto sigbus;
if (!access_ok(VERIFY_WRITE, addr, 8))
goto sigbus;
value = regs->regs[reg];
StoreW(addr, value, res);
if (res)
goto fault;
addr += 4;
value = regs->regs[reg + 1];
StoreW(addr, value, res);
if (res)
goto fault;
goto success;
case mm_ldp_func:
#ifdef CONFIG_64BIT
reg = insn.mm_m_format.rd;
if (reg == 31)
goto sigbus;
if (!access_ok(VERIFY_READ, addr, 16))
goto sigbus;
LoadDW(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
addr += 8;
LoadDW(addr, value, res);
if (res)
goto fault;
regs->regs[reg + 1] = value;
goto success;
#endif /* CONFIG_64BIT */
goto sigill;
case mm_sdp_func:
#ifdef CONFIG_64BIT
reg = insn.mm_m_format.rd;
if (reg == 31)
goto sigbus;
if (!access_ok(VERIFY_WRITE, addr, 16))
goto sigbus;
value = regs->regs[reg];
StoreDW(addr, value, res);
if (res)
goto fault;
addr += 8;
value = regs->regs[reg + 1];
StoreDW(addr, value, res);
if (res)
goto fault;
goto success;
#endif /* CONFIG_64BIT */
goto sigill;
case mm_lwm32_func:
reg = insn.mm_m_format.rd;
rvar = reg & 0xf;
if ((rvar > 9) || !reg)
goto sigill;
if (reg & 0x10) {
if (!access_ok
(VERIFY_READ, addr, 4 * (rvar + 1)))
goto sigbus;
} else {
if (!access_ok(VERIFY_READ, addr, 4 * rvar))
goto sigbus;
}
if (rvar == 9)
rvar = 8;
for (i = 16; rvar; rvar--, i++) {
LoadW(addr, value, res);
if (res)
goto fault;
addr += 4;
regs->regs[i] = value;
}
if ((reg & 0xf) == 9) {
LoadW(addr, value, res);
if (res)
goto fault;
addr += 4;
regs->regs[30] = value;
}
if (reg & 0x10) {
LoadW(addr, value, res);
if (res)
goto fault;
regs->regs[31] = value;
}
goto success;
case mm_swm32_func:
reg = insn.mm_m_format.rd;
rvar = reg & 0xf;
if ((rvar > 9) || !reg)
goto sigill;
if (reg & 0x10) {
if (!access_ok
(VERIFY_WRITE, addr, 4 * (rvar + 1)))
goto sigbus;
} else {
if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
goto sigbus;
}
if (rvar == 9)
rvar = 8;
for (i = 16; rvar; rvar--, i++) {
value = regs->regs[i];
StoreW(addr, value, res);
if (res)
goto fault;
addr += 4;
}
if ((reg & 0xf) == 9) {
value = regs->regs[30];
StoreW(addr, value, res);
if (res)
goto fault;
addr += 4;
}
if (reg & 0x10) {
value = regs->regs[31];
StoreW(addr, value, res);
if (res)
goto fault;
}
goto success;
case mm_ldm_func:
#ifdef CONFIG_64BIT
reg = insn.mm_m_format.rd;
rvar = reg & 0xf;
if ((rvar > 9) || !reg)
goto sigill;
if (reg & 0x10) {
if (!access_ok
(VERIFY_READ, addr, 8 * (rvar + 1)))
goto sigbus;
} else {
if (!access_ok(VERIFY_READ, addr, 8 * rvar))
goto sigbus;
}
if (rvar == 9)
rvar = 8;
for (i = 16; rvar; rvar--, i++) {
LoadDW(addr, value, res);
if (res)
goto fault;
addr += 4;
regs->regs[i] = value;
}
if ((reg & 0xf) == 9) {
LoadDW(addr, value, res);
if (res)
goto fault;
addr += 8;
regs->regs[30] = value;
}
if (reg & 0x10) {
LoadDW(addr, value, res);
if (res)
goto fault;
regs->regs[31] = value;
}
goto success;
#endif /* CONFIG_64BIT */
goto sigill;
case mm_sdm_func:
#ifdef CONFIG_64BIT
reg = insn.mm_m_format.rd;
rvar = reg & 0xf;
if ((rvar > 9) || !reg)
goto sigill;
if (reg & 0x10) {
if (!access_ok
(VERIFY_WRITE, addr, 8 * (rvar + 1)))
goto sigbus;
} else {
if (!access_ok(VERIFY_WRITE, addr, 8 * rvar))
goto sigbus;
}
if (rvar == 9)
rvar = 8;
for (i = 16; rvar; rvar--, i++) {
value = regs->regs[i];
StoreDW(addr, value, res);
if (res)
goto fault;
addr += 8;
}
if ((reg & 0xf) == 9) {
value = regs->regs[30];
StoreDW(addr, value, res);
if (res)
goto fault;
addr += 8;
}
if (reg & 0x10) {
value = regs->regs[31];
StoreDW(addr, value, res);
if (res)
goto fault;
}
goto success;
#endif /* CONFIG_64BIT */
goto sigill;
/* LWC2, SWC2, LDC2, SDC2 are not serviced */
}
goto sigbus;
case mm_pool32c_op:
switch (insn.mm_m_format.func) {
case mm_lwu_func:
reg = insn.mm_m_format.rd;
goto loadWU;
}
/* LL,SC,LLD,SCD are not serviced */
goto sigbus;
case mm_pool32f_op:
switch (insn.mm_x_format.func) {
case mm_lwxc1_func:
case mm_swxc1_func:
case mm_ldxc1_func:
case mm_sdxc1_func:
goto fpu_emul;
}
goto sigbus;
case mm_ldc132_op:
case mm_sdc132_op:
case mm_lwc132_op:
case mm_swc132_op:
fpu_emul:
/* roll back jump/branch */
regs->cp0_epc = origpc;
regs->regs[31] = orig31;
die_if_kernel("Unaligned FP access in kernel code", regs);
BUG_ON(!used_math());
BUG_ON(!is_fpu_owner());
lose_fpu(1); /* save the FPU state for the emulator */
res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
own_fpu(1); /* restore FPU state */
/* If something went wrong, signal */
process_fpemu_return(res, fault_addr, 0);
if (res == 0)
goto success;
return;
case mm_lh32_op:
reg = insn.mm_i_format.rt;
goto loadHW;
case mm_lhu32_op:
reg = insn.mm_i_format.rt;
goto loadHWU;
case mm_lw32_op:
reg = insn.mm_i_format.rt;
goto loadW;
case mm_sh32_op:
reg = insn.mm_i_format.rt;
goto storeHW;
case mm_sw32_op:
reg = insn.mm_i_format.rt;
goto storeW;
case mm_ld32_op:
reg = insn.mm_i_format.rt;
goto loadDW;
case mm_sd32_op:
reg = insn.mm_i_format.rt;
goto storeDW;
case mm_pool16c_op:
switch (insn.mm16_m_format.func) {
case mm_lwm16_op:
reg = insn.mm16_m_format.rlist;
rvar = reg + 1;
if (!access_ok(VERIFY_READ, addr, 4 * rvar))
goto sigbus;
for (i = 16; rvar; rvar--, i++) {
LoadW(addr, value, res);
if (res)
goto fault;
addr += 4;
regs->regs[i] = value;
}
LoadW(addr, value, res);
if (res)
goto fault;
regs->regs[31] = value;
goto success;
case mm_swm16_op:
reg = insn.mm16_m_format.rlist;
rvar = reg + 1;
if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
goto sigbus;
for (i = 16; rvar; rvar--, i++) {
value = regs->regs[i];
StoreW(addr, value, res);
if (res)
goto fault;
addr += 4;
}
value = regs->regs[31];
StoreW(addr, value, res);
if (res)
goto fault;
goto success;
}
goto sigbus;
case mm_lhu16_op:
reg = reg16to32[insn.mm16_rb_format.rt];
goto loadHWU;
case mm_lw16_op:
reg = reg16to32[insn.mm16_rb_format.rt];
goto loadW;
case mm_sh16_op:
reg = reg16to32st[insn.mm16_rb_format.rt];
goto storeHW;
case mm_sw16_op:
reg = reg16to32st[insn.mm16_rb_format.rt];
goto storeW;
case mm_lwsp16_op:
reg = insn.mm16_r5_format.rt;
goto loadW;
case mm_swsp16_op:
reg = insn.mm16_r5_format.rt;
goto storeW;
case mm_lwgp16_op:
reg = reg16to32[insn.mm16_r3_format.rt];
goto loadW;
default:
goto sigill;
}
loadHW:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
LoadHW(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
goto success;
loadHWU:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
LoadHWU(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
goto success;
loadW:
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
LoadW(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
goto success;
loadWU:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
LoadWU(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
goto success;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
loadDW:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_READ, addr, 8))
goto sigbus;
LoadDW(addr, value, res);
if (res)
goto fault;
regs->regs[reg] = value;
goto success;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
storeHW:
if (!access_ok(VERIFY_WRITE, addr, 2))
goto sigbus;
value = regs->regs[reg];
StoreHW(addr, value, res);
if (res)
goto fault;
goto success;
storeW:
if (!access_ok(VERIFY_WRITE, addr, 4))
goto sigbus;
value = regs->regs[reg];
StoreW(addr, value, res);
if (res)
goto fault;
goto success;
storeDW:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_WRITE, addr, 8))
goto sigbus;
value = regs->regs[reg];
StoreDW(addr, value, res);
if (res)
goto fault;
goto success;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
success:
regs->cp0_epc = contpc; /* advance or branch */
#ifdef CONFIG_DEBUG_FS
unaligned_instructions++;
#endif
return;
fault:
/* roll back jump/branch */
regs->cp0_epc = origpc;
regs->regs[31] = orig31;
/* Did we have an exception handler installed? */
if (fixup_exception(regs))
return;
die_if_kernel("Unhandled kernel unaligned access", regs);
force_sig(SIGSEGV, current);
return;
sigbus:
die_if_kernel("Unhandled kernel unaligned access", regs);
force_sig(SIGBUS, current);
return;
sigill:
die_if_kernel
("Unhandled kernel unaligned access or invalid instruction", regs);
force_sig(SIGILL, current);
}
static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
{
unsigned long value;
unsigned int res;
int reg;
unsigned long orig31;
u16 __user *pc16;
unsigned long origpc;
union mips16e_instruction mips16inst, oldinst;
origpc = regs->cp0_epc;
orig31 = regs->regs[31];
pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
/*
* This load never faults.
*/
__get_user(mips16inst.full, pc16);
oldinst = mips16inst;
/* skip EXTEND instruction */
if (mips16inst.ri.opcode == MIPS16e_extend_op) {
pc16++;
__get_user(mips16inst.full, pc16);
} else if (delay_slot(regs)) {
/* skip jump instructions */
/* JAL/JALX are 32 bits but have OPCODE in first short int */
if (mips16inst.ri.opcode == MIPS16e_jal_op)
pc16++;
pc16++;
if (get_user(mips16inst.full, pc16))
goto sigbus;
}
switch (mips16inst.ri.opcode) {
case MIPS16e_i64_op: /* I64 or RI64 instruction */
switch (mips16inst.i64.func) { /* I64/RI64 func field check */
case MIPS16e_ldpc_func:
case MIPS16e_ldsp_func:
reg = reg16to32[mips16inst.ri64.ry];
goto loadDW;
case MIPS16e_sdsp_func:
reg = reg16to32[mips16inst.ri64.ry];
goto writeDW;
case MIPS16e_sdrasp_func:
reg = 29; /* GPRSP */
goto writeDW;
}
goto sigbus;
case MIPS16e_swsp_op:
case MIPS16e_lwpc_op:
case MIPS16e_lwsp_op:
reg = reg16to32[mips16inst.ri.rx];
break;
case MIPS16e_i8_op:
if (mips16inst.i8.func != MIPS16e_swrasp_func)
goto sigbus;
reg = 29; /* GPRSP */
break;
default:
reg = reg16to32[mips16inst.rri.ry];
break;
}
switch (mips16inst.ri.opcode) {
case MIPS16e_lb_op:
case MIPS16e_lbu_op:
case MIPS16e_sb_op:
goto sigbus;
case MIPS16e_lh_op:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
LoadHW(addr, value, res);
if (res)
goto fault;
MIPS16e_compute_return_epc(regs, &oldinst);
regs->regs[reg] = value;
break;
case MIPS16e_lhu_op:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
LoadHWU(addr, value, res);
if (res)
goto fault;
MIPS16e_compute_return_epc(regs, &oldinst);
regs->regs[reg] = value;
break;
case MIPS16e_lw_op:
case MIPS16e_lwpc_op:
case MIPS16e_lwsp_op:
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
LoadW(addr, value, res);
if (res)
goto fault;
MIPS16e_compute_return_epc(regs, &oldinst);
regs->regs[reg] = value;
break;
case MIPS16e_lwu_op:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
LoadWU(addr, value, res);
if (res)
goto fault;
MIPS16e_compute_return_epc(regs, &oldinst);
regs->regs[reg] = value;
break;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
case MIPS16e_ld_op:
loadDW:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_READ, addr, 8))
goto sigbus;
LoadDW(addr, value, res);
if (res)
goto fault;
MIPS16e_compute_return_epc(regs, &oldinst);
regs->regs[reg] = value;
break;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
case MIPS16e_sh_op:
if (!access_ok(VERIFY_WRITE, addr, 2))
goto sigbus;
MIPS16e_compute_return_epc(regs, &oldinst);
value = regs->regs[reg];
StoreHW(addr, value, res);
if (res)
goto fault;
break;
case MIPS16e_sw_op:
case MIPS16e_swsp_op:
case MIPS16e_i8_op: /* actually - MIPS16e_swrasp_func */
if (!access_ok(VERIFY_WRITE, addr, 4))
goto sigbus;
MIPS16e_compute_return_epc(regs, &oldinst);
value = regs->regs[reg];
StoreW(addr, value, res);
if (res)
goto fault;
break;
case MIPS16e_sd_op:
writeDW:
#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
* or race makes us see a 64-bit instruction here the sdl/sdr
* would blow up, so for now we don't handle unaligned 64-bit
* instructions on 32-bit kernels.
*/
if (!access_ok(VERIFY_WRITE, addr, 8))
goto sigbus;
MIPS16e_compute_return_epc(regs, &oldinst);
value = regs->regs[reg];
StoreDW(addr, value, res);
if (res)
goto fault;
break;
#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
default:
/*
* Pheeee... We encountered an yet unknown instruction or
* cache coherence problem. Die sucker, die ...
*/
goto sigill;
}
#ifdef CONFIG_DEBUG_FS
unaligned_instructions++;
#endif
return;
fault:
/* roll back jump/branch */
regs->cp0_epc = origpc;
regs->regs[31] = orig31;
/* Did we have an exception handler installed? */
if (fixup_exception(regs))
return;
die_if_kernel("Unhandled kernel unaligned access", regs);
force_sig(SIGSEGV, current);
return;
sigbus:
die_if_kernel("Unhandled kernel unaligned access", regs);
force_sig(SIGBUS, current);
return;
sigill:
die_if_kernel
("Unhandled kernel unaligned access or invalid instruction", regs);
force_sig(SIGILL, current);
}
asmlinkage void do_ade(struct pt_regs *regs)
{
enum ctx_state prev_state;
unsigned int __user *pc;
mm_segment_t seg;
prev_state = exception_enter();
perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
1, regs, regs->cp0_badvaddr);
/*
* Did we catch a fault trying to load an instruction?
*/
if (regs->cp0_badvaddr == regs->cp0_epc)
goto sigbus;
if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
goto sigbus;
if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
goto sigbus;
/*
* Do branch emulation only if we didn't forward the exception.
* This is all so but ugly ...
*/
/*
* Are we running in microMIPS mode?
*/
if (get_isa16_mode(regs->cp0_epc)) {
/*
* Did we catch a fault trying to load an instruction in
* 16-bit mode?
*/
if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
goto sigbus;
if (unaligned_action == UNALIGNED_ACTION_SHOW)
show_registers(regs);
if (cpu_has_mmips) {
seg = get_fs();
if (!user_mode(regs))
set_fs(KERNEL_DS);
emulate_load_store_microMIPS(regs,
(void __user *)regs->cp0_badvaddr);
set_fs(seg);
return;
}
if (cpu_has_mips16) {
seg = get_fs();
if (!user_mode(regs))
set_fs(KERNEL_DS);
emulate_load_store_MIPS16e(regs,
(void __user *)regs->cp0_badvaddr);
set_fs(seg);
return;
}
goto sigbus;
}
if (unaligned_action == UNALIGNED_ACTION_SHOW)
show_registers(regs);
pc = (unsigned int __user *)exception_epc(regs);
seg = get_fs();
if (!user_mode(regs))
set_fs(KERNEL_DS);
emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
set_fs(seg);
return;
sigbus:
die_if_kernel("Kernel unaligned instruction access", regs);
force_sig(SIGBUS, current);
/*
* XXX On return from the signal handler we should advance the epc
*/
exception_exit(prev_state);
}
#ifdef CONFIG_DEBUG_FS
static int __init debugfs_unaligned(void)
{
struct dentry *d;
if (!mips_debugfs_dir)
return -ENODEV;
d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
mips_debugfs_dir, &unaligned_instructions);
if (!d)
return -ENOMEM;
d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
mips_debugfs_dir, &unaligned_action);
if (!d)
return -ENOMEM;
return 0;
}
arch_initcall(debugfs_unaligned);
#endif
View Git Blame Copy Permalink