AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
fe1c445b60
kernel_optimize_test/arch/powerpc/kernel/entry_32.S
Michael Ellerman d38374142b powerpc/kernel: Change the do_syscall_trace_enter() API 
The API for calling do_syscall_trace_enter() is currently sensible
enough, it just returns the (modified) syscall number.

However once we enable seccomp filter it will get more complicated. When
seccomp filter runs, the seccomp kernel code (via SECCOMP_RET_ERRNO), or
a ptracer (via SECCOMP_RET_TRACE), may reject the syscall and *may* or may
*not* set a return value in r3.

That means the assembler that calls do_syscall_trace_enter() can not
blindly return ENOSYS, it needs to only return ENOSYS if a return value
has not already been set.

There is no way to implement that logic with the current API. So change
the do_syscall_trace_enter() API to make it deal with the return code
juggling, and the assembler can then just return whatever return code it
is given.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
2015-07-29 11:56:11 +10:00

1395 lines
34 KiB
ArmAsm
Raw Blame History

/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP
* Copyright (C) 1996 Cort Dougan <cort@fsmlabs.com>
* Adapted for Power Macintosh by Paul Mackerras.
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
* This file contains the system call entry code, context switch
* code, and exception/interrupt return code for PowerPC.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sys.h>
#include <linux/threads.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <asm/ptrace.h>
/*
* MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
*/
#if MSR_KERNEL >= 0x10000
#define LOAD_MSR_KERNEL(r, x) lis r,(x)@h; ori r,r,(x)@l
#else
#define LOAD_MSR_KERNEL(r, x) li r,(x)
#endif
#ifdef CONFIG_BOOKE
.globl mcheck_transfer_to_handler
mcheck_transfer_to_handler:
mfspr r0,SPRN_DSRR0
stw r0,_DSRR0(r11)
mfspr r0,SPRN_DSRR1
stw r0,_DSRR1(r11)
/* fall through */
.globl debug_transfer_to_handler
debug_transfer_to_handler:
mfspr r0,SPRN_CSRR0
stw r0,_CSRR0(r11)
mfspr r0,SPRN_CSRR1
stw r0,_CSRR1(r11)
/* fall through */
.globl crit_transfer_to_handler
crit_transfer_to_handler:
#ifdef CONFIG_PPC_BOOK3E_MMU
mfspr r0,SPRN_MAS0
stw r0,MAS0(r11)
mfspr r0,SPRN_MAS1
stw r0,MAS1(r11)
mfspr r0,SPRN_MAS2
stw r0,MAS2(r11)
mfspr r0,SPRN_MAS3
stw r0,MAS3(r11)
mfspr r0,SPRN_MAS6
stw r0,MAS6(r11)
#ifdef CONFIG_PHYS_64BIT
mfspr r0,SPRN_MAS7
stw r0,MAS7(r11)
#endif /* CONFIG_PHYS_64BIT */
#endif /* CONFIG_PPC_BOOK3E_MMU */
#ifdef CONFIG_44x
mfspr r0,SPRN_MMUCR
stw r0,MMUCR(r11)
#endif
mfspr r0,SPRN_SRR0
stw r0,_SRR0(r11)
mfspr r0,SPRN_SRR1
stw r0,_SRR1(r11)
/* set the stack limit to the current stack
* and set the limit to protect the thread_info
* struct
*/
mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,SAVED_KSP_LIMIT(r11)
rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
stw r0,KSP_LIMIT(r8)
/* fall through */
#endif
#ifdef CONFIG_40x
.globl crit_transfer_to_handler
crit_transfer_to_handler:
lwz r0,crit_r10@l(0)
stw r0,GPR10(r11)
lwz r0,crit_r11@l(0)
stw r0,GPR11(r11)
mfspr r0,SPRN_SRR0
stw r0,crit_srr0@l(0)
mfspr r0,SPRN_SRR1
stw r0,crit_srr1@l(0)
/* set the stack limit to the current stack
* and set the limit to protect the thread_info
* struct
*/
mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,saved_ksp_limit@l(0)
rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
stw r0,KSP_LIMIT(r8)
/* fall through */
#endif
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception, turning
* on address translation.
* Note that we rely on the caller having set cr0.eq iff the exception
* occurred in kernel mode (i.e. MSR:PR = 0).
*/
.globl transfer_to_handler_full
transfer_to_handler_full:
SAVE_NVGPRS(r11)
/* fall through */
.globl transfer_to_handler
transfer_to_handler:
stw r2,GPR2(r11)
stw r12,_NIP(r11)
stw r9,_MSR(r11)
andi. r2,r9,MSR_PR
mfctr r12
mfspr r2,SPRN_XER
stw r12,_CTR(r11)
stw r2,_XER(r11)
mfspr r12,SPRN_SPRG_THREAD
addi r2,r12,-THREAD
tovirt(r2,r2) /* set r2 to current */
beq 2f /* if from user, fix up THREAD.regs */
addi r11,r1,STACK_FRAME_OVERHEAD
stw r11,PT_REGS(r12)
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
/* Check to see if the dbcr0 register is set up to debug. Use the
internal debug mode bit to do this. */
lwz r12,THREAD_DBCR0(r12)
andis. r12,r12,DBCR0_IDM@h
beq+ 3f
/* From user and task is ptraced - load up global dbcr0 */
li r12,-1 /* clear all pending debug events */
mtspr SPRN_DBSR,r12
lis r11,global_dbcr0@ha
tophys(r11,r11)
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_CPU(r9)
slwi r9,r9,3
add r11,r11,r9
#endif
lwz r12,0(r11)
mtspr SPRN_DBCR0,r12
lwz r12,4(r11)
addi r12,r12,-1
stw r12,4(r11)
#endif
b 3f
2: /* if from kernel, check interrupted DOZE/NAP mode and
* check for stack overflow
*/
lwz r9,KSP_LIMIT(r12)
cmplw r1,r9 /* if r1 <= ksp_limit */
ble- stack_ovf /* then the kernel stack overflowed */
5:
#if defined(CONFIG_6xx) || defined(CONFIG_E500)
CURRENT_THREAD_INFO(r9, r1)
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
bt- 31-TLF_SLEEPING,7f
#endif /* CONFIG_6xx || CONFIG_E500 */
.globl transfer_to_handler_cont
transfer_to_handler_cont:
3:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
#ifdef CONFIG_TRACE_IRQFLAGS
lis r12,reenable_mmu@h
ori r12,r12,reenable_mmu@l
mtspr SPRN_SRR0,r12
mtspr SPRN_SRR1,r10
SYNC
RFI
reenable_mmu: /* re-enable mmu so we can */
mfmsr r10
lwz r12,_MSR(r1)
xor r10,r10,r12
andi. r10,r10,MSR_EE /* Did EE change? */
beq 1f
/*
* The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
* If from user mode there is only one stack frame on the stack, and
* accessing CALLER_ADDR1 will cause oops. So we need create a dummy
* stack frame to make trace_hardirqs_off happy.
*
* This is handy because we also need to save a bunch of GPRs,
* r3 can be different from GPR3(r1) at this point, r9 and r11
* contains the old MSR and handler address respectively,
* r4 & r5 can contain page fault arguments that need to be passed
* along as well. r12, CCR, CTR, XER etc... are left clobbered as
* they aren't useful past this point (aren't syscall arguments),
* the rest is restored from the exception frame.
*/
stwu r1,-32(r1)
stw r9,8(r1)
stw r11,12(r1)
stw r3,16(r1)
stw r4,20(r1)
stw r5,24(r1)
bl trace_hardirqs_off
lwz r5,24(r1)
lwz r4,20(r1)
lwz r3,16(r1)
lwz r11,12(r1)
lwz r9,8(r1)
addi r1,r1,32
lwz r0,GPR0(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
1: mtctr r11
mtlr r9
bctr /* jump to handler */
#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
stw r12,TI_LOCAL_FLAGS(r9)
b power_save_ppc32_restore
7: rlwinm r12,r12,0,~_TLF_SLEEPING
stw r12,TI_LOCAL_FLAGS(r9)
lwz r9,_MSR(r11) /* if sleeping, clear MSR.EE */
rlwinm r9,r9,0,~MSR_EE
lwz r12,_LINK(r11) /* and return to address in LR */
b fast_exception_return
#endif
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
*/
stack_ovf:
/* sometimes we use a statically-allocated stack, which is OK. */
lis r12,_end@h
ori r12,r12,_end@l
cmplw r1,r12
ble 5b /* r1 <= &_end is OK */
SAVE_NVGPRS(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
addi r1,r1,init_thread_union@l
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
lis r9,StackOverflow@ha
addi r9,r9,StackOverflow@l
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
FIX_SRR1(r10,r12)
mtspr SPRN_SRR0,r9
mtspr SPRN_SRR1,r10
SYNC
RFI
/*
* Handle a system call.
*/
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "entry_32.S",N_SO,0,0,0f
0:
_GLOBAL(DoSyscall)
stw r3,ORIG_GPR3(r1)
li r12,0
stw r12,RESULT(r1)
lwz r11,_CCR(r1) /* Clear SO bit in CR */
rlwinm r11,r11,0,4,2
stw r11,_CCR(r1)
#ifdef CONFIG_TRACE_IRQFLAGS
/* Return from syscalls can (and generally will) hard enable
* interrupts. You aren't supposed to call a syscall with
* interrupts disabled in the first place. However, to ensure
* that we get it right vs. lockdep if it happens, we force
* that hard enable here with appropriate tracing if we see
* that we have been called with interrupts off
*/
mfmsr r11
andi. r12,r11,MSR_EE
bne+ 1f
/* We came in with interrupts disabled, we enable them now */
bl trace_hardirqs_on
mfmsr r11
lwz r0,GPR0(r1)
lwz r3,GPR3(r1)
lwz r4,GPR4(r1)
ori r11,r11,MSR_EE
lwz r5,GPR5(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
mtmsr r11
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
CURRENT_THREAD_INFO(r10, r1)
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_DOTRACE
bne- syscall_dotrace
syscall_dotrace_cont:
cmplwi 0,r0,NR_syscalls
lis r10,sys_call_table@h
ori r10,r10,sys_call_table@l
slwi r0,r0,2
bge- 66f
lwzx r10,r10,r0 /* Fetch system call handler [ptr] */
mtlr r10
addi r9,r1,STACK_FRAME_OVERHEAD
PPC440EP_ERR42
blrl /* Call handler */
.globl ret_from_syscall
ret_from_syscall:
mr r6,r3
CURRENT_THREAD_INFO(r12, r1)
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
/* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
li r8,-MAX_ERRNO
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmplw 0,r3,r8
blt+ syscall_exit_cont
lwz r11,_CCR(r1) /* Load CR */
neg r3,r3
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
lwz r8,_MSR(r1)
#ifdef CONFIG_TRACE_IRQFLAGS
/* If we are going to return from the syscall with interrupts
* off, we trace that here. It shouldn't happen though but we
* want to catch the bugger if it does right ?
*/
andi. r10,r8,MSR_EE
bne+ 1f
stw r3,GPR3(r1)
bl trace_hardirqs_off
lwz r3,GPR3(r1)
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
lwz r0,THREAD+THREAD_DBCR0(r2)
andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
#ifdef CONFIG_44x
BEGIN_MMU_FTR_SECTION
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
bne- 2f
1:
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x)
#endif /* CONFIG_44x */
BEGIN_FTR_SECTION
lwarx r7,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
SYNC
RFI
#ifdef CONFIG_44x
2: li r7,0
iccci r0,r0
stw r7,icache_44x_need_flush@l(r4)
b 1b
#endif /* CONFIG_44x */
66: li r3,-ENOSYS
b ret_from_syscall
.globl ret_from_fork
ret_from_fork:
REST_NVGPRS(r1)
bl schedule_tail
li r3,0
b ret_from_syscall
.globl ret_from_kernel_thread
ret_from_kernel_thread:
REST_NVGPRS(r1)
bl schedule_tail
mtlr r14
mr r3,r15
PPC440EP_ERR42
blrl
li r3,0
b ret_from_syscall
/* Traced system call support */
syscall_dotrace:
SAVE_NVGPRS(r1)
li r0,0xc00
stw r0,_TRAP(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_enter
/*
* Restore argument registers possibly just changed.
* We use the return value of do_syscall_trace_enter
* for call number to look up in the table (r0).
*/
mr r0,r3
lwz r3,GPR3(r1)
lwz r4,GPR4(r1)
lwz r5,GPR5(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
REST_NVGPRS(r1)
cmplwi r0,NR_syscalls
/* Return code is already in r3 thanks to do_syscall_trace_enter() */
bge- ret_from_syscall
b syscall_dotrace_cont
syscall_exit_work:
andi. r0,r9,_TIF_RESTOREALL
beq+ 0f
REST_NVGPRS(r1)
b 2f
0: cmplw 0,r3,r8
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
lwz r11,_CCR(r1) /* Load CR */
neg r3,r3
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
1: stw r6,RESULT(r1) /* Save result */
stw r3,GPR3(r1) /* Update return value */
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
/* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
3: lwarx r8,0,r12
andc r8,r8,r11
#ifdef CONFIG_IBM405_ERR77
dcbt 0,r12
#endif
stwcx. r8,0,r12
bne- 3b
subi r12,r12,TI_FLAGS
4: /* Anything which requires enabling interrupts? */
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
beq ret_from_except
/* Re-enable interrupts. There is no need to trace that with
* lockdep as we are supposed to have IRQs on at this point
*/
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
/* Save NVGPRS if they're not saved already */
lwz r4,_TRAP(r1)
andi. r4,r4,1
beq 5f
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,_TRAP(r1)
5:
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
b ret_from_except_full
/*
* The fork/clone functions need to copy the full register set into
* the child process. Therefore we need to save all the nonvolatile
* registers (r13 - r31) before calling the C code.
*/
.globl ppc_fork
ppc_fork:
SAVE_NVGPRS(r1)
lwz r0,_TRAP(r1)
rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
stw r0,_TRAP(r1) /* register set saved */
b sys_fork
.globl ppc_vfork
ppc_vfork:
SAVE_NVGPRS(r1)
lwz r0,_TRAP(r1)
rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
stw r0,_TRAP(r1) /* register set saved */
b sys_vfork
.globl ppc_clone
ppc_clone:
SAVE_NVGPRS(r1)
lwz r0,_TRAP(r1)
rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
stw r0,_TRAP(r1) /* register set saved */
b sys_clone
.globl ppc_swapcontext
ppc_swapcontext:
SAVE_NVGPRS(r1)
lwz r0,_TRAP(r1)
rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
stw r0,_TRAP(r1) /* register set saved */
b sys_swapcontext
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
* it is a bad kernel page fault, we want to save the non-volatile
* registers before calling bad_page_fault.
*/
.globl handle_page_fault
handle_page_fault:
stw r4,_DAR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_page_fault
cmpwi r3,0
beq+ ret_from_except
SAVE_NVGPRS(r1)
lwz r0,_TRAP(r1)
clrrwi r0,r0,1
stw r0,_TRAP(r1)
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
lwz r4,_DAR(r1)
bl bad_page_fault
b ret_from_except_full
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
* of the other is restored from its kernel stack. The memory
* management hardware is updated to the second process's state.
* Finally, we can return to the second process.
* On entry, r3 points to the THREAD for the current task, r4
* points to the THREAD for the new task.
*
* This routine is always called with interrupts disabled.
*
* Note: there are two ways to get to the "going out" portion
* of this code; either by coming in via the entry (_switch)
* or via "fork" which must set up an environment equivalent
* to the "_switch" path. If you change this , you'll have to
* change the fork code also.
*
* The code which creates the new task context is in 'copy_thread'
* in arch/ppc/kernel/process.c
*/
_GLOBAL(_switch)
stwu r1,-INT_FRAME_SIZE(r1)
mflr r0
stw r0,INT_FRAME_SIZE+4(r1)
/* r3-r12 are caller saved -- Cort */
SAVE_NVGPRS(r1)
stw r0,_NIP(r1) /* Return to switch caller */
mfmsr r11
li r0,MSR_FP /* Disable floating-point */
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
oris r0,r0,MSR_VEC@h /* Disable altivec */
mfspr r12,SPRN_VRSAVE /* save vrsave register value */
stw r12,THREAD+THREAD_VRSAVE(r2)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
BEGIN_FTR_SECTION
oris r0,r0,MSR_SPE@h /* Disable SPE */
mfspr r12,SPRN_SPEFSCR /* save spefscr register value */
stw r12,THREAD+THREAD_SPEFSCR(r2)
END_FTR_SECTION_IFSET(CPU_FTR_SPE)
#endif /* CONFIG_SPE */
and. r0,r0,r11 /* FP or altivec or SPE enabled? */
beq+ 1f
andc r11,r11,r0
MTMSRD(r11)
isync
1: stw r11,_MSR(r1)
mfcr r10
stw r10,_CCR(r1)
stw r1,KSP(r3) /* Set old stack pointer */
#ifdef CONFIG_SMP
/* We need a sync somewhere here to make sure that if the
* previous task gets rescheduled on another CPU, it sees all
* stores it has performed on this one.
*/
sync
#endif /* CONFIG_SMP */
tophys(r0,r4)
CLR_TOP32(r0)
mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */
lwz r1,KSP(r4) /* Load new stack pointer */
/* save the old current 'last' for return value */
mr r3,r2
addi r2,r4,-THREAD /* Update current */
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
lwz r0,THREAD+THREAD_VRSAVE(r2)
mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
BEGIN_FTR_SECTION
lwz r0,THREAD+THREAD_SPEFSCR(r2)
mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */
END_FTR_SECTION_IFSET(CPU_FTR_SPE)
#endif /* CONFIG_SPE */
lwz r0,_CCR(r1)
mtcrf 0xFF,r0
/* r3-r12 are destroyed -- Cort */
REST_NVGPRS(r1)
lwz r4,_NIP(r1) /* Return to _switch caller in new task */
mtlr r4
addi r1,r1,INT_FRAME_SIZE
blr
.globl fast_exception_return
fast_exception_return:
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
andi. r10,r9,MSR_RI /* check for recoverable interrupt */
beq 1f /* if not, we've got problems */
#endif
2: REST_4GPRS(3, r11)
lwz r10,_CCR(r11)
REST_GPR(1, r11)
mtcr r10
lwz r10,_LINK(r11)
mtlr r10
REST_GPR(10, r11)
mtspr SPRN_SRR1,r9
mtspr SPRN_SRR0,r12
REST_GPR(9, r11)
REST_GPR(12, r11)
lwz r11,GPR11(r11)
SYNC
RFI
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
/* check if the exception happened in a restartable section */
1: lis r3,exc_exit_restart_end@ha
addi r3,r3,exc_exit_restart_end@l
cmplw r12,r3
bge 3f
lis r4,exc_exit_restart@ha
addi r4,r4,exc_exit_restart@l
cmplw r12,r4
blt 3f
lis r3,fee_restarts@ha
tophys(r3,r3)
lwz r5,fee_restarts@l(r3)
addi r5,r5,1
stw r5,fee_restarts@l(r3)
mr r12,r4 /* restart at exc_exit_restart */
b 2b
.section .bss
.align 2
fee_restarts:
.space 4
.previous
/* aargh, a nonrecoverable interrupt, panic */
/* aargh, we don't know which trap this is */
/* but the 601 doesn't implement the RI bit, so assume it's OK */
3:
BEGIN_FTR_SECTION
b 2b
END_FTR_SECTION_IFSET(CPU_FTR_601)
li r10,-1
stw r10,_TRAP(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
lis r10,MSR_KERNEL@h
ori r10,r10,MSR_KERNEL@l
bl transfer_to_handler_full
.long nonrecoverable_exception
.long ret_from_except
#endif
.globl ret_from_except_full
ret_from_except_full:
REST_NVGPRS(r1)
/* fall through */
.globl ret_from_except
ret_from_except:
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
/* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
lwz r3,_MSR(r1) /* Returning to user mode? */
andi. r0,r3,MSR_PR
beq resume_kernel
user_exc_return: /* r10 contains MSR_KERNEL here */
/* Check current_thread_info()->flags */
CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_FLAGS(r9)
andi. r0,r9,_TIF_USER_WORK_MASK
bne do_work
restore_user:
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* Check whether this process has its own DBCR0 value. The internal
debug mode bit tells us that dbcr0 should be loaded. */
lwz r0,THREAD+THREAD_DBCR0(r2)
andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
b restore
/* N.B. the only way to get here is from the beq following ret_from_except. */
resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
CURRENT_THREAD_INFO(r9, r1)
lwz r8,TI_FLAGS(r9)
andis. r0,r8,_TIF_EMULATE_STACK_STORE@h
beq+ 1f
addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
lwz r3,GPR1(r1)
subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
mr r4,r1 /* src: current exception frame */
mr r1,r3 /* Reroute the trampoline frame to r1 */
/* Copy from the original to the trampoline. */
li r5,INT_FRAME_SIZE/4 /* size: INT_FRAME_SIZE */
li r6,0 /* start offset: 0 */
mtctr r5
2: lwzx r0,r6,r4
stwx r0,r6,r3
addi r6,r6,4
bdnz 2b
/* Do real store operation to complete stwu */
lwz r5,GPR1(r1)
stw r8,0(r5)
/* Clear _TIF_EMULATE_STACK_STORE flag */
lis r11,_TIF_EMULATE_STACK_STORE@h
addi r5,r9,TI_FLAGS
0: lwarx r8,0,r5
andc r8,r8,r11
#ifdef CONFIG_IBM405_ERR77
dcbt 0,r5
#endif
stwcx. r8,0,r5
bne- 0b
1:
#ifdef CONFIG_PREEMPT
/* check current_thread_info->preempt_count */
lwz r0,TI_PREEMPT(r9)
cmpwi 0,r0,0 /* if non-zero, just restore regs and return */
bne restore
andi. r8,r8,_TIF_NEED_RESCHED
beq+ restore
lwz r3,_MSR(r1)
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
#ifdef CONFIG_TRACE_IRQFLAGS
/* Lockdep thinks irqs are enabled, we need to call
* preempt_schedule_irq with IRQs off, so we inform lockdep
* now that we -did- turn them off already
*/
bl trace_hardirqs_off
#endif
1: bl preempt_schedule_irq
CURRENT_THREAD_INFO(r9, r1)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
#ifdef CONFIG_TRACE_IRQFLAGS
/* And now, to properly rebalance the above, we tell lockdep they
* are being turned back on, which will happen when we return
*/
bl trace_hardirqs_on
#endif
#endif /* CONFIG_PREEMPT */
/* interrupts are hard-disabled at this point */
restore:
#ifdef CONFIG_44x
BEGIN_MMU_FTR_SECTION
b 1f
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
beq+ 1f
li r6,0
iccci r0,r0
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
lwz r9,_MSR(r1)
#ifdef CONFIG_TRACE_IRQFLAGS
/* Lockdep doesn't know about the fact that IRQs are temporarily turned
* off in this assembly code while peeking at TI_FLAGS() and such. However
* we need to inform it if the exception turned interrupts off, and we
* are about to trun them back on.
*
* The problem here sadly is that we don't know whether the exceptions was
* one that turned interrupts off or not. So we always tell lockdep about
* turning them on here when we go back to wherever we came from with EE
* on, even if that may meen some redudant calls being tracked. Maybe later
* we could encode what the exception did somewhere or test the exception
* type in the pt_regs but that sounds overkill
*/
andi. r10,r9,MSR_EE
beq 1f
/*
* Since the ftrace irqsoff latency trace checks CALLER_ADDR1,
* which is the stack frame here, we need to force a stack frame
* in case we came from user space.
*/
stwu r1,-32(r1)
mflr r0
stw r0,4(r1)
stwu r1,-32(r1)
bl trace_hardirqs_on
lwz r1,0(r1)
lwz r1,0(r1)
lwz r9,_MSR(r1)
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
REST_2GPRS(7, r1)
lwz r10,_XER(r1)
lwz r11,_CTR(r1)
mtspr SPRN_XER,r10
mtctr r11
PPC405_ERR77(0,r1)
BEGIN_FTR_SECTION
lwarx r11,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
lwz r10,_CCR(r1)
lwz r11,_LINK(r1)
mtcrf 0xFF,r10
mtlr r11
/*
* Once we put values in SRR0 and SRR1, we are in a state
* where exceptions are not recoverable, since taking an
* exception will trash SRR0 and SRR1. Therefore we clear the
* MSR:RI bit to indicate this. If we do take an exception,
* we can't return to the point of the exception but we
* can restart the exception exit path at the label
* exc_exit_restart below. -- paulus
*/
LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI)
SYNC
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
mtspr SPRN_SRR1,r9
REST_4GPRS(9, r1)
lwz r1,GPR1(r1)
.globl exc_exit_restart_end
exc_exit_restart_end:
SYNC
RFI
#else /* !(CONFIG_4xx || CONFIG_BOOKE) */
/*
* This is a bit different on 4xx/Book-E because it doesn't have
* the RI bit in the MSR.
* The TLB miss handler checks if we have interrupted
* the exception exit path and restarts it if so
* (well maybe one day it will... :).
*/
lwz r11,_LINK(r1)
mtlr r11
lwz r10,_CCR(r1)
mtcrf 0xff,r10
REST_2GPRS(9, r1)
.globl exc_exit_restart
exc_exit_restart:
lwz r11,_NIP(r1)
lwz r12,_MSR(r1)
exc_exit_start:
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
REST_2GPRS(11, r1)
lwz r1,GPR1(r1)
.globl exc_exit_restart_end
exc_exit_restart_end:
PPC405_ERR77_SYNC
rfi
b . /* prevent prefetch past rfi */
/*
* Returning from a critical interrupt in user mode doesn't need
* to be any different from a normal exception. For a critical
* interrupt in the kernel, we just return (without checking for
* preemption) since the interrupt may have happened at some crucial
* place (e.g. inside the TLB miss handler), and because we will be
* running with r1 pointing into critical_stack, not the current
* process's kernel stack (and therefore current_thread_info() will
* give the wrong answer).
* We have to restore various SPRs that may have been in use at the
* time of the critical interrupt.
*
*/
#ifdef CONFIG_40x
#define PPC_40x_TURN_OFF_MSR_DR \
/* avoid any possible TLB misses here by turning off MSR.DR, we \
* assume the instructions here are mapped by a pinned TLB entry */ \
li r10,MSR_IR; \
mtmsr r10; \
isync; \
tophys(r1, r1);
#else
#define PPC_40x_TURN_OFF_MSR_DR
#endif
#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \
REST_NVGPRS(r1); \
lwz r3,_MSR(r1); \
andi. r3,r3,MSR_PR; \
LOAD_MSR_KERNEL(r10,MSR_KERNEL); \
bne user_exc_return; \
lwz r0,GPR0(r1); \
lwz r2,GPR2(r1); \
REST_4GPRS(3, r1); \
REST_2GPRS(7, r1); \
lwz r10,_XER(r1); \
lwz r11,_CTR(r1); \
mtspr SPRN_XER,r10; \
mtctr r11; \
PPC405_ERR77(0,r1); \
stwcx. r0,0,r1; /* to clear the reservation */ \
lwz r11,_LINK(r1); \
mtlr r11; \
lwz r10,_CCR(r1); \
mtcrf 0xff,r10; \
PPC_40x_TURN_OFF_MSR_DR; \
lwz r9,_DEAR(r1); \
lwz r10,_ESR(r1); \
mtspr SPRN_DEAR,r9; \
mtspr SPRN_ESR,r10; \
lwz r11,_NIP(r1); \
lwz r12,_MSR(r1); \
mtspr exc_lvl_srr0,r11; \
mtspr exc_lvl_srr1,r12; \
lwz r9,GPR9(r1); \
lwz r12,GPR12(r1); \
lwz r10,GPR10(r1); \
lwz r11,GPR11(r1); \
lwz r1,GPR1(r1); \
PPC405_ERR77_SYNC; \
exc_lvl_rfi; \
b .; /* prevent prefetch past exc_lvl_rfi */
#define RESTORE_xSRR(exc_lvl_srr0, exc_lvl_srr1) \
lwz r9,_##exc_lvl_srr0(r1); \
lwz r10,_##exc_lvl_srr1(r1); \
mtspr SPRN_##exc_lvl_srr0,r9; \
mtspr SPRN_##exc_lvl_srr1,r10;
#if defined(CONFIG_PPC_BOOK3E_MMU)
#ifdef CONFIG_PHYS_64BIT
#define RESTORE_MAS7 \
lwz r11,MAS7(r1); \
mtspr SPRN_MAS7,r11;
#else
#define RESTORE_MAS7
#endif /* CONFIG_PHYS_64BIT */
#define RESTORE_MMU_REGS \
lwz r9,MAS0(r1); \
lwz r10,MAS1(r1); \
lwz r11,MAS2(r1); \
mtspr SPRN_MAS0,r9; \
lwz r9,MAS3(r1); \
mtspr SPRN_MAS1,r10; \
lwz r10,MAS6(r1); \
mtspr SPRN_MAS2,r11; \
mtspr SPRN_MAS3,r9; \
mtspr SPRN_MAS6,r10; \
RESTORE_MAS7;
#elif defined(CONFIG_44x)
#define RESTORE_MMU_REGS \
lwz r9,MMUCR(r1); \
mtspr SPRN_MMUCR,r9;
#else
#define RESTORE_MMU_REGS
#endif
#ifdef CONFIG_40x
.globl ret_from_crit_exc
ret_from_crit_exc:
mfspr r9,SPRN_SPRG_THREAD
lis r10,saved_ksp_limit@ha;
lwz r10,saved_ksp_limit@l(r10);
tovirt(r9,r9);
stw r10,KSP_LIMIT(r9)
lis r9,crit_srr0@ha;
lwz r9,crit_srr0@l(r9);
lis r10,crit_srr1@ha;
lwz r10,crit_srr1@l(r10);
mtspr SPRN_SRR0,r9;
mtspr SPRN_SRR1,r10;
RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI)
#endif /* CONFIG_40x */
#ifdef CONFIG_BOOKE
.globl ret_from_crit_exc
ret_from_crit_exc:
mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
RESTORE_MMU_REGS;
RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI)
.globl ret_from_debug_exc
ret_from_debug_exc:
mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
lwz r9,THREAD_INFO-THREAD(r9)
CURRENT_THREAD_INFO(r10, r1)
lwz r10,TI_PREEMPT(r10)
stw r10,TI_PREEMPT(r9)
RESTORE_xSRR(SRR0,SRR1);
RESTORE_xSRR(CSRR0,CSRR1);
RESTORE_MMU_REGS;
RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, PPC_RFDI)
.globl ret_from_mcheck_exc
ret_from_mcheck_exc:
mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
RESTORE_xSRR(CSRR0,CSRR1);
RESTORE_xSRR(DSRR0,DSRR1);
RESTORE_MMU_REGS;
RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, PPC_RFMCI)
#endif /* CONFIG_BOOKE */
/*
* Load the DBCR0 value for a task that is being ptraced,
* having first saved away the global DBCR0. Note that r0
* has the dbcr0 value to set upon entry to this.
*/
load_dbcr0:
mfmsr r10 /* first disable debug exceptions */
rlwinm r10,r10,0,~MSR_DE
mtmsr r10
isync
mfspr r10,SPRN_DBCR0
lis r11,global_dbcr0@ha
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_CPU(r9)
slwi r9,r9,3
add r11,r11,r9
#endif
stw r10,0(r11)
mtspr SPRN_DBCR0,r0
lwz r10,4(r11)
addi r10,r10,1
stw r10,4(r11)
li r11,-1
mtspr SPRN_DBSR,r11 /* clear all pending debug events */
blr
.section .bss
.align 4
global_dbcr0:
.space 8*NR_CPUS
.previous
#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
do_work: /* r10 contains MSR_KERNEL here */
andi. r0,r9,_TIF_NEED_RESCHED
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
/* Note: We don't need to inform lockdep that we are enabling
* interrupts here. As far as it knows, they are already enabled
*/
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
/* Note: And we don't tell it we are disabling them again
* neither. Those disable/enable cycles used to peek at
* TI_FLAGS aren't advertised.
*/
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_FLAGS(r9)
andi. r0,r9,_TIF_NEED_RESCHED
bne- do_resched
andi. r0,r9,_TIF_USER_WORK_MASK
beq restore_user
do_user_signal: /* r10 contains MSR_KERNEL here */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
/* save r13-r31 in the exception frame, if not already done */
lwz r3,_TRAP(r1)
andi. r0,r3,1
beq 2f
SAVE_NVGPRS(r1)
rlwinm r3,r3,0,0,30
stw r3,_TRAP(r1)
2: addi r3,r1,STACK_FRAME_OVERHEAD
mr r4,r9
bl do_notify_resume
REST_NVGPRS(r1)
b recheck
/*
* We come here when we are at the end of handling an exception
* that occurred at a place where taking an exception will lose
* state information, such as the contents of SRR0 and SRR1.
*/
nonrecoverable:
lis r10,exc_exit_restart_end@ha
addi r10,r10,exc_exit_restart_end@l
cmplw r12,r10
bge 3f
lis r11,exc_exit_restart@ha
addi r11,r11,exc_exit_restart@l
cmplw r12,r11
blt 3f
lis r10,ee_restarts@ha
lwz r12,ee_restarts@l(r10)
addi r12,r12,1
stw r12,ee_restarts@l(r10)
mr r12,r11 /* restart at exc_exit_restart */
blr
3: /* OK, we can't recover, kill this process */
/* but the 601 doesn't implement the RI bit, so assume it's OK */
BEGIN_FTR_SECTION
blr
END_FTR_SECTION_IFSET(CPU_FTR_601)
lwz r3,_TRAP(r1)
andi. r0,r3,1
beq 4f
SAVE_NVGPRS(r1)
rlwinm r3,r3,0,0,30
stw r3,_TRAP(r1)
4: addi r3,r1,STACK_FRAME_OVERHEAD
bl nonrecoverable_exception
/* shouldn't return */
b 4b
.section .bss
.align 2
ee_restarts:
.space 4
.previous
/*
* PROM code for specific machines follows. Put it
* here so it's easy to add arch-specific sections later.
* -- Cort
*/
#ifdef CONFIG_PPC_RTAS
/*
* On CHRP, the Run-Time Abstraction Services (RTAS) have to be
* called with the MMU off.
*/
_GLOBAL(enter_rtas)
stwu r1,-INT_FRAME_SIZE(r1)
mflr r0
stw r0,INT_FRAME_SIZE+4(r1)
LOAD_REG_ADDR(r4, rtas)
lis r6,1f@ha /* physical return address for rtas */
addi r6,r6,1f@l
tophys(r6,r6)
tophys(r7,r1)
lwz r8,RTASENTRY(r4)
lwz r4,RTASBASE(r4)
mfmsr r9
stw r9,8(r1)
LOAD_MSR_KERNEL(r0,MSR_KERNEL)
SYNC /* disable interrupts so SRR0/1 */
MTMSRD(r0) /* don't get trashed */
li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
mtlr r6
mtspr SPRN_SPRG_RTAS,r7
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
RFI
1: tophys(r9,r1)
lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */
lwz r9,8(r9) /* original msr value */
FIX_SRR1(r9,r0)
addi r1,r1,INT_FRAME_SIZE
li r0,0
mtspr SPRN_SPRG_RTAS,r0
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
RFI /* return to caller */
.globl machine_check_in_rtas
machine_check_in_rtas:
twi 31,0,0
/* XXX load up BATs and panic */
#endif /* CONFIG_PPC_RTAS */
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
_GLOBAL(mcount)
_GLOBAL(_mcount)
/*
* It is required that _mcount on PPC32 must preserve the
* link register. But we have r0 to play with. We use r0
* to push the return address back to the caller of mcount
* into the ctr register, restore the link register and
* then jump back using the ctr register.
*/
mflr r0
mtctr r0
lwz r0, 4(r1)
mtlr r0
bctr
_GLOBAL(ftrace_caller)
MCOUNT_SAVE_FRAME
/* r3 ends up with link register */
subi r3, r3, MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
bl ftrace_stub
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_call
ftrace_graph_call:
b ftrace_graph_stub
_GLOBAL(ftrace_graph_stub)
#endif
MCOUNT_RESTORE_FRAME
/* old link register ends up in ctr reg */
bctr
#else
_GLOBAL(mcount)
_GLOBAL(_mcount)
MCOUNT_SAVE_FRAME
subi r3, r3, MCOUNT_INSN_SIZE
LOAD_REG_ADDR(r5, ftrace_trace_function)
lwz r5,0(r5)
mtctr r5
bctrl
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
b ftrace_graph_caller
#endif
MCOUNT_RESTORE_FRAME
bctr
#endif
_GLOBAL(ftrace_stub)
blr
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
_GLOBAL(ftrace_graph_caller)
/* load r4 with local address */
lwz r4, 44(r1)
subi r4, r4, MCOUNT_INSN_SIZE
/* Grab the LR out of the caller stack frame */
lwz r3,52(r1)
bl prepare_ftrace_return
nop
/*
* prepare_ftrace_return gives us the address we divert to.
* Change the LR in the callers stack frame to this.
*/
stw r3,52(r1)
MCOUNT_RESTORE_FRAME
/* old link register ends up in ctr reg */
bctr
_GLOBAL(return_to_handler)
/* need to save return values */
stwu r1, -32(r1)
stw r3, 20(r1)
stw r4, 16(r1)
stw r31, 12(r1)
mr r31, r1
bl ftrace_return_to_handler
nop
/* return value has real return address */
mtlr r3
lwz r3, 20(r1)
lwz r4, 16(r1)
lwz r31,12(r1)
lwz r1, 0(r1)
/* Jump back to real return address */
blr
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#endif /* CONFIG_FUNCTION_TRACER */
View Git Blame Copy Permalink