forked from luck/tmp_suning_uos_patched
2956b5d94a
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
317 lines
7.6 KiB
C
317 lines
7.6 KiB
C
/*
|
|
* gpiolib support for Wolfson WM831x PMICs
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/mfd/wm831x/core.h>
|
|
#include <linux/mfd/wm831x/pdata.h>
|
|
#include <linux/mfd/wm831x/gpio.h>
|
|
#include <linux/mfd/wm831x/irq.h>
|
|
|
|
struct wm831x_gpio {
|
|
struct wm831x *wm831x;
|
|
struct gpio_chip gpio_chip;
|
|
};
|
|
|
|
static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
int val = WM831X_GPN_DIR;
|
|
|
|
if (wm831x->has_gpio_ena)
|
|
val |= WM831X_GPN_TRI;
|
|
|
|
return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
|
|
WM831X_GPN_DIR | WM831X_GPN_TRI |
|
|
WM831X_GPN_FN_MASK, val);
|
|
}
|
|
|
|
static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & 1 << offset)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
|
|
wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
|
|
value << offset);
|
|
}
|
|
|
|
static int wm831x_gpio_direction_out(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
int val = 0;
|
|
int ret;
|
|
|
|
if (wm831x->has_gpio_ena)
|
|
val |= WM831X_GPN_TRI;
|
|
|
|
ret = wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
|
|
WM831X_GPN_DIR | WM831X_GPN_TRI |
|
|
WM831X_GPN_FN_MASK, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Can only set GPIO state once it's in output mode */
|
|
wm831x_gpio_set(chip, offset, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
|
|
return irq_create_mapping(wm831x->irq_domain,
|
|
WM831X_IRQ_GPIO_1 + offset);
|
|
}
|
|
|
|
static int wm831x_gpio_set_debounce(struct wm831x *wm831x, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
int reg = WM831X_GPIO1_CONTROL + offset;
|
|
int ret, fn;
|
|
|
|
ret = wm831x_reg_read(wm831x, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (ret & WM831X_GPN_FN_MASK) {
|
|
case 0:
|
|
case 1:
|
|
break;
|
|
default:
|
|
/* Not in GPIO mode */
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (debounce >= 32 && debounce <= 64)
|
|
fn = 0;
|
|
else if (debounce >= 4000 && debounce <= 8000)
|
|
fn = 1;
|
|
else
|
|
return -EINVAL;
|
|
|
|
return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn);
|
|
}
|
|
|
|
static int wm831x_set_config(struct gpio_chip *chip, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
int reg = WM831X_GPIO1_CONTROL + offset;
|
|
|
|
switch (pinconf_to_config_param(config)) {
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
return wm831x_set_bits(wm831x, reg,
|
|
WM831X_GPN_OD_MASK, WM831X_GPN_OD);
|
|
case PIN_CONFIG_DRIVE_PUSH_PULL:
|
|
return wm831x_set_bits(wm831x, reg,
|
|
WM831X_GPN_OD_MASK, 0);
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
return wm831x_gpio_set_debounce(wm831x, offset,
|
|
pinconf_to_config_argument(config));
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
|
|
struct wm831x *wm831x = wm831x_gpio->wm831x;
|
|
int i, tristated;
|
|
|
|
for (i = 0; i < chip->ngpio; i++) {
|
|
int gpio = i + chip->base;
|
|
int reg;
|
|
const char *label, *pull, *powerdomain;
|
|
|
|
/* We report the GPIO even if it's not requested since
|
|
* we're also reporting things like alternate
|
|
* functions which apply even when the GPIO is not in
|
|
* use as a GPIO.
|
|
*/
|
|
label = gpiochip_is_requested(chip, i);
|
|
if (!label)
|
|
label = "Unrequested";
|
|
|
|
seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
|
|
|
|
reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
|
|
if (reg < 0) {
|
|
dev_err(wm831x->dev,
|
|
"GPIO control %d read failed: %d\n",
|
|
gpio, reg);
|
|
seq_printf(s, "\n");
|
|
continue;
|
|
}
|
|
|
|
switch (reg & WM831X_GPN_PULL_MASK) {
|
|
case WM831X_GPIO_PULL_NONE:
|
|
pull = "nopull";
|
|
break;
|
|
case WM831X_GPIO_PULL_DOWN:
|
|
pull = "pulldown";
|
|
break;
|
|
case WM831X_GPIO_PULL_UP:
|
|
pull = "pullup";
|
|
break;
|
|
default:
|
|
pull = "INVALID PULL";
|
|
break;
|
|
}
|
|
|
|
switch (i + 1) {
|
|
case 1 ... 3:
|
|
case 7 ... 9:
|
|
if (reg & WM831X_GPN_PWR_DOM)
|
|
powerdomain = "VPMIC";
|
|
else
|
|
powerdomain = "DBVDD";
|
|
break;
|
|
|
|
case 4 ... 6:
|
|
case 10 ... 12:
|
|
if (reg & WM831X_GPN_PWR_DOM)
|
|
powerdomain = "SYSVDD";
|
|
else
|
|
powerdomain = "DBVDD";
|
|
break;
|
|
|
|
case 13 ... 16:
|
|
powerdomain = "TPVDD";
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
tristated = reg & WM831X_GPN_TRI;
|
|
if (wm831x->has_gpio_ena)
|
|
tristated = !tristated;
|
|
|
|
seq_printf(s, " %s %s %s %s%s\n"
|
|
" %s%s (0x%4x)\n",
|
|
reg & WM831X_GPN_DIR ? "in" : "out",
|
|
wm831x_gpio_get(chip, i) ? "high" : "low",
|
|
pull,
|
|
powerdomain,
|
|
reg & WM831X_GPN_POL ? "" : " inverted",
|
|
reg & WM831X_GPN_OD ? "open-drain" : "push-pull",
|
|
tristated ? " tristated" : "",
|
|
reg);
|
|
}
|
|
}
|
|
#else
|
|
#define wm831x_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
static const struct gpio_chip template_chip = {
|
|
.label = "wm831x",
|
|
.owner = THIS_MODULE,
|
|
.direction_input = wm831x_gpio_direction_in,
|
|
.get = wm831x_gpio_get,
|
|
.direction_output = wm831x_gpio_direction_out,
|
|
.set = wm831x_gpio_set,
|
|
.to_irq = wm831x_gpio_to_irq,
|
|
.set_config = wm831x_set_config,
|
|
.dbg_show = wm831x_gpio_dbg_show,
|
|
.can_sleep = true,
|
|
};
|
|
|
|
static int wm831x_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
|
|
struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
|
|
struct wm831x_gpio *wm831x_gpio;
|
|
int ret;
|
|
|
|
wm831x_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm831x_gpio),
|
|
GFP_KERNEL);
|
|
if (wm831x_gpio == NULL)
|
|
return -ENOMEM;
|
|
|
|
wm831x_gpio->wm831x = wm831x;
|
|
wm831x_gpio->gpio_chip = template_chip;
|
|
wm831x_gpio->gpio_chip.ngpio = wm831x->num_gpio;
|
|
wm831x_gpio->gpio_chip.parent = &pdev->dev;
|
|
if (pdata && pdata->gpio_base)
|
|
wm831x_gpio->gpio_chip.base = pdata->gpio_base;
|
|
else
|
|
wm831x_gpio->gpio_chip.base = -1;
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip,
|
|
wm831x_gpio);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, wm831x_gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver wm831x_gpio_driver = {
|
|
.driver.name = "wm831x-gpio",
|
|
.probe = wm831x_gpio_probe,
|
|
};
|
|
|
|
static int __init wm831x_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&wm831x_gpio_driver);
|
|
}
|
|
subsys_initcall(wm831x_gpio_init);
|
|
|
|
static void __exit wm831x_gpio_exit(void)
|
|
{
|
|
platform_driver_unregister(&wm831x_gpio_driver);
|
|
}
|
|
module_exit(wm831x_gpio_exit);
|
|
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:wm831x-gpio");
|