kernel_optimize_test/drivers/scsi/arm/oak.c
Arnd Bergmann ea065f13cc SCSI: ARM: ncr5380/oak uses no interrupts
The ncr5380 driver is included by multiple board specific
drivers, which may or may not use the interrupt handler.
The oak variant doesn't, and should set the DONT_USE_INTR
macro.

Without this patch, building rpc_defconfig results in:

drivers/scsi/arm/../NCR5380.c:1160:20: warning: 'oakscsi_intr' defined but not used [-Wunused-function]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-scsi@vger.kernel.org
2012-10-09 21:56:24 +02:00

229 lines
4.7 KiB
C

/*
* Oak Generic NCR5380 driver
*
* Copyright 1995-2002, Russell King
*/
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include "../scsi.h"
#include <scsi/scsi_host.h>
#define AUTOSENSE
/*#define PSEUDO_DMA*/
#define OAKSCSI_PUBLIC_RELEASE 1
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_local_declare() void __iomem *_base
#define NCR5380_setup(host) _base = priv(host)->base
#define NCR5380_read(reg) readb(_base + ((reg) << 2))
#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
#define NCR5380_intr oakscsi_intr
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_proc_info oakscsi_proc_info
#define NCR5380_implementation_fields \
void __iomem *base
#define BOARD_NORMAL 0
#define BOARD_NCR53C400 1
#include "../NCR5380.h"
#undef START_DMA_INITIATOR_RECEIVE_REG
#define START_DMA_INITIATOR_RECEIVE_REG (128 + 7)
const char * oakscsi_info (struct Scsi_Host *spnt)
{
return "";
}
#define STAT ((128 + 16) << 2)
#define DATA ((128 + 8) << 2)
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
int len)
{
void __iomem *base = priv(instance)->base;
printk("writing %p len %d\n",addr, len);
if(!len) return -1;
while(1)
{
int status;
while (((status = readw(base + STAT)) & 0x100)==0);
}
}
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
int len)
{
void __iomem *base = priv(instance)->base;
printk("reading %p len %d\n", addr, len);
while(len > 0)
{
unsigned int status, timeout;
unsigned long b;
timeout = 0x01FFFFFF;
while (((status = readw(base + STAT)) & 0x100)==0)
{
timeout--;
if(status & 0x200 || !timeout)
{
printk("status = %08X\n", status);
return 1;
}
}
if(len >= 128)
{
readsw(base + DATA, addr, 128);
addr += 128;
len -= 128;
}
else
{
b = (unsigned long) readw(base + DATA);
*addr ++ = b;
len -= 1;
if(len)
*addr ++ = b>>8;
len -= 1;
}
}
return 0;
}
#undef STAT
#undef DATA
#include "../NCR5380.c"
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
.proc_info = oakscsi_proc_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
.eh_abort_handler = NCR5380_abort,
.eh_bus_reset_handler = NCR5380_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
};
static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
ret = ecard_request_resources(ec);
if (ret)
goto out;
host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
if (!host) {
ret = -ENOMEM;
goto release;
}
priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
ecard_resource_len(ec, ECARD_RES_MEMC));
if (!priv(host)->base) {
ret = -ENOMEM;
goto unreg;
}
host->irq = IRQ_NONE;
host->n_io_port = 255;
NCR5380_init(host, 0);
printk("scsi%d: at port 0x%08lx irqs disabled",
host->host_no, host->io_port);
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
printk("\nscsi%d:", host->host_no);
NCR5380_print_options(host);
printk("\n");
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;
scsi_scan_host(host);
goto out;
out_unmap:
iounmap(priv(host)->base);
unreg:
scsi_host_put(host);
release:
ecard_release_resources(ec);
out:
return ret;
}
static void __devexit oakscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
ecard_set_drvdata(ec, NULL);
scsi_remove_host(host);
NCR5380_exit(host);
iounmap(priv(host)->base);
scsi_host_put(host);
ecard_release_resources(ec);
}
static const struct ecard_id oakscsi_cids[] = {
{ MANU_OAK, PROD_OAK_SCSI },
{ 0xffff, 0xffff }
};
static struct ecard_driver oakscsi_driver = {
.probe = oakscsi_probe,
.remove = __devexit_p(oakscsi_remove),
.id_table = oakscsi_cids,
.drv = {
.name = "oakscsi",
},
};
static int __init oakscsi_init(void)
{
return ecard_register_driver(&oakscsi_driver);
}
static void __exit oakscsi_exit(void)
{
ecard_remove_driver(&oakscsi_driver);
}
module_init(oakscsi_init);
module_exit(oakscsi_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("Oak SCSI driver");
MODULE_LICENSE("GPL");