diff --git a/llvm/include/llvm/Analysis/IRSimilarityIdentifier.h b/llvm/include/llvm/Analysis/IRSimilarityIdentifier.h index 9f9e7c59b42b..d40d51e2d337 100644 --- a/llvm/include/llvm/Analysis/IRSimilarityIdentifier.h +++ b/llvm/include/llvm/Analysis/IRSimilarityIdentifier.h @@ -850,6 +850,49 @@ public: IRSimilarityCandidate &SourceCand, DenseMap> &ToSourceMapping, DenseMap> &FromSourceMapping); + + /// Create a mapping for the value numbering of the calling + /// IRSimilarityCandidate, to a different separate set of numbers, based on + /// the canonical ordering in \p SourceCand. These are defined based on the + /// found mappings in \p ToSourceMapping and \p FromSourceMapping. Both of + /// these relationships should have the same information, just in opposite + /// directions. Uses the \p OneToOne mapping from target candidate to \p + /// SourceCand GVNs to determine the mapping first for values with multiple + /// mappings. This mapping is created by the ordering of operands in the + /// instruction they are first seen in the candidates. + /// + /// \param [in, out] SourceCand - The IRSimilarityCandidate to create a + /// canonical numbering from. + /// \param [in,out] OneToOne - A mapping of value numbers from candidate + /// \p A to candidate \B using the structure of the original instructions. + /// \param ToSourceMapping - The mapping of value numbers from this candidate + /// to \p SourceCand. + /// \param FromSourceMapping - The mapping of value numbers from \p SoureCand + /// to this candidate. + void createCanonicalRelationFrom( + IRSimilarityCandidate &SourceCand, + DenseMap &OneToOne, + DenseMap> &ToSourceMapping, + DenseMap> &FromSourceMapping); + + /// Create a mapping for the value numbering of the calling + /// IRSimilarityCandidate, to a different separate set of numbers, based on + /// the canonical ordering in \p SourceCand. These are defined based on the + /// canonical mapping defined between \p SoureCandLarge and + /// \p TargetCandLarge. These IRSimilarityCandidates are already structurally + /// similar, and fully encapsulate the IRSimilarityCandidates in question. + /// These are used as a "bridge" from the \p SourceCand to the target. + /// + /// \param [in, out] SourceCand - The IRSimilarityCandidate to create a + /// canonical numbering from. + /// \param SoureCandLarge - The IRSimilarityCandidate fully containing + /// \p SourceCand. + /// \param TargetCandLarge - The IRSimilarityCandidate fully containing + /// this Candidate. + void createCanonicalRelationFrom( + IRSimilarityCandidate &SourceCand, + IRSimilarityCandidate &SourceCandLarge, + IRSimilarityCandidate &TargetCandLarge); /// \param [in,out] BBSet - The set to track the basic blocks. void getBasicBlocks(DenseSet &BBSet) const { diff --git a/llvm/lib/Analysis/IRSimilarityIdentifier.cpp b/llvm/lib/Analysis/IRSimilarityIdentifier.cpp index c8007be4142c..454ce5a6925b 100644 --- a/llvm/lib/Analysis/IRSimilarityIdentifier.cpp +++ b/llvm/lib/Analysis/IRSimilarityIdentifier.cpp @@ -1101,6 +1101,76 @@ void IRSimilarityCandidate::createCanonicalRelationFrom( } } +void IRSimilarityCandidate::createCanonicalRelationFrom( + IRSimilarityCandidate &SourceCand, IRSimilarityCandidate &SourceCandLarge, + IRSimilarityCandidate &TargetCandLarge) { + assert(!SourceCand.CanonNumToNumber.empty() && + "Canonical Relationship is non-empty"); + assert(!SourceCand.NumberToCanonNum.empty() && + "Canonical Relationship is non-empty"); + + assert(!SourceCandLarge.CanonNumToNumber.empty() && + "Canonical Relationship is non-empty"); + assert(!SourceCandLarge.NumberToCanonNum.empty() && + "Canonical Relationship is non-empty"); + + assert(!TargetCandLarge.CanonNumToNumber.empty() && + "Canonical Relationship is non-empty"); + assert(!TargetCandLarge.NumberToCanonNum.empty() && + "Canonical Relationship is non-empty"); + + assert(CanonNumToNumber.empty() && "Canonical Relationship is non-empty"); + assert(NumberToCanonNum.empty() && "Canonical Relationship is non-empty"); + + // We're going to use the larger candidates as a "bridge" to create the + // canonical number for the target candidate since we have idetified two + // candidates as subsequences of larger sequences, and therefore must be + // structurally similar. + for (std::pair &ValueNumPair : ValueToNumber) { + Value *CurrVal = ValueNumPair.first; + unsigned TargetCandGVN = ValueNumPair.second; + + // Find the numbering in the large candidate that surrounds the + // current candidate. + std::optional OLargeTargetGVN = TargetCandLarge.getGVN(CurrVal); + assert(OLargeTargetGVN.has_value() && "GVN not found for Value"); + + // Get the canonical numbering in the large target candidate. + std::optional OTargetCandCanon = + TargetCandLarge.getCanonicalNum(OLargeTargetGVN.value()); + assert(OTargetCandCanon.has_value() && + "Canononical Number not found for GVN"); + + // Get the GVN in the large source candidate from the canonical numbering. + std::optional OLargeSourceGVN = + SourceCandLarge.fromCanonicalNum(OTargetCandCanon.value()); + assert(OLargeSourceGVN.has_value() && + "GVN Number not found for Canonical Number"); + + // Get the Value from the GVN in the large source candidate. + std::optional OLargeSourceV = + SourceCandLarge.fromGVN(OLargeSourceGVN.value()); + assert(OLargeSourceV.has_value() && "Value not found for GVN"); + + // Get the GVN number for the Value in the source candidate. + std::optional OSourceGVN = + SourceCand.getGVN(OLargeSourceV.value()); + assert(OSourceGVN.has_value() && "GVN Number not found for Value"); + + // Get the canonical numbering from the GVN/ + std::optional OSourceCanon = + SourceCand.getCanonicalNum(OSourceGVN.value()); + assert(OSourceCanon.has_value() && "Canon Number not found for GVN"); + + // Insert the canonical numbering and GVN pair into their respective + // mappings. + CanonNumToNumber.insert( + std::make_pair(OSourceCanon.value(), TargetCandGVN)); + NumberToCanonNum.insert( + std::make_pair(TargetCandGVN, OSourceCanon.value())); + } +} + void IRSimilarityCandidate::createCanonicalMappingFor( IRSimilarityCandidate &CurrCand) { assert(CurrCand.CanonNumToNumber.size() == 0 && @@ -1118,6 +1188,81 @@ void IRSimilarityCandidate::createCanonicalMappingFor( } } +/// Look for larger IRSimilarityCandidates From the previously matched +/// IRSimilarityCandidates that fully contain \p CandA or \p CandB. If there is +/// an overlap, return a pair of structurally similar, larger +/// IRSimilarityCandidates. +/// +/// \param [in] CandA - The first candidate we are trying to determine the +/// structure of. +/// \param [in] CandB - The second candidate we are trying to determine the +/// structure of. +/// \param [in] IndexToIncludedCand - Mapping of index of the an instruction in +/// a circuit to the IRSimilarityCandidates that include this instruction. +/// \param [in] CandToOverallGroup - Mapping of IRSimilarityCandidate to a +/// number representing the structural group assigned to it. +static std::optional< + std::pair> +CheckLargerCands( + IRSimilarityCandidate &CandA, IRSimilarityCandidate &CandB, + DenseMap> &IndexToIncludedCand, + DenseMap &CandToGroup) { + DenseMap IncludedGroupAndCandA; + DenseMap IncludedGroupAndCandB; + DenseSet IncludedGroupsA; + DenseSet IncludedGroupsB; + + // Find the overall similarity group numbers that fully contain the candidate, + // and record the larger candidate for each group. + auto IdxToCandidateIt = IndexToIncludedCand.find(CandA.getStartIdx()); + std::optional> + Result; + + unsigned CandAStart = CandA.getStartIdx(); + unsigned CandAEnd = CandA.getEndIdx(); + unsigned CandBStart = CandB.getStartIdx(); + unsigned CandBEnd = CandB.getEndIdx(); + if (IdxToCandidateIt == IndexToIncludedCand.end()) + return Result; + for (IRSimilarityCandidate *MatchedCand : IdxToCandidateIt->second) { + if (MatchedCand->getStartIdx() > CandAStart || + (MatchedCand->getEndIdx() < CandAEnd)) + continue; + unsigned GroupNum = CandToGroup.find(MatchedCand)->second; + IncludedGroupAndCandA.insert(std::make_pair(GroupNum, MatchedCand)); + IncludedGroupsA.insert(GroupNum); + } + + // Find the overall similarity group numbers that fully contain the next + // candidate, and record the larger candidate for each group. + IdxToCandidateIt = IndexToIncludedCand.find(CandBStart); + if (IdxToCandidateIt == IndexToIncludedCand.end()) + return Result; + for (IRSimilarityCandidate *MatchedCand : IdxToCandidateIt->second) { + if (MatchedCand->getStartIdx() > CandBStart || + MatchedCand->getEndIdx() < CandBEnd) + continue; + unsigned GroupNum = CandToGroup.find(MatchedCand)->second; + IncludedGroupAndCandB.insert(std::make_pair(GroupNum, MatchedCand)); + IncludedGroupsB.insert(GroupNum); + } + + // Find the intersection between the two groups, these are the groups where + // the larger candidates exist. + set_intersect(IncludedGroupsA, IncludedGroupsB); + + // If there is no intersection between the sets, then we cannot determine + // whether or not there is a match. + if (IncludedGroupsA.empty()) + return Result; + + // Create a pair that contains the larger candidates. + auto ItA = IncludedGroupAndCandA.find(*IncludedGroupsA.begin()); + auto ItB = IncludedGroupAndCandB.find(*IncludedGroupsA.begin()); + Result = std::make_pair(ItA->second, ItB->second); + return Result; +} + /// From the list of IRSimilarityCandidates, perform a comparison between each /// IRSimilarityCandidate to determine if there are overlapping /// IRInstructionData, or if they do not have the same structure. @@ -1127,9 +1272,16 @@ void IRSimilarityCandidate::createCanonicalMappingFor( /// \param [out] StructuralGroups - the mapping of unsigned integers to vector /// of IRSimilarityCandidates where each of the IRSimilarityCandidates in the /// vector are structurally similar to one another. +/// \param [in] IndexToIncludedCand - Mapping of index of the an instruction in +/// a circuit to the IRSimilarityCandidates that include this instruction. +/// \param [in] CandToOverallGroup - Mapping of IRSimilarityCandidate to a +/// number representing the structural group assigned to it. static void findCandidateStructures( std::vector &CandsForRepSubstring, - DenseMap &StructuralGroups) { + DenseMap &StructuralGroups, + DenseMap> &IndexToIncludedCand, + DenseMap &CandToOverallGroup + ) { std::vector::iterator CandIt, CandEndIt, InnerCandIt, InnerCandEndIt; @@ -1192,6 +1344,24 @@ static void findCandidateStructures( if (CandToGroupItInner != CandToGroup.end()) continue; + // Check if we have found structural similarity between two candidates + // that fully contains the first and second candidates. + std::optional> + LargerPair = CheckLargerCands( + *CandIt, *InnerCandIt, IndexToIncludedCand, CandToOverallGroup); + + // If a pair was found, it means that we can assume that these smaller + // substrings are also structurally similar. Use the larger candidates to + // determine the canonical mapping between the two sections. + if (LargerPair.has_value()) { + SameStructure = true; + InnerCandIt->createCanonicalRelationFrom( + *CandIt, *LargerPair.value().first, *LargerPair.value().second); + CandToGroup.insert(std::make_pair(&*InnerCandIt, OuterGroupNum)); + CurrentGroupPair->second.push_back(*InnerCandIt); + continue; + } + // Otherwise we determine if they have the same structure and add it to // vector if they match. ValueNumberMappingA.clear(); @@ -1218,24 +1388,58 @@ void IRSimilarityIdentifier::findCandidates( std::vector NewCandidateGroups; DenseMap StructuralGroups; + DenseMap> IndexToIncludedCand; + DenseMap CandToGroup; // Iterate over the subsequences found by the Suffix Tree to create // IRSimilarityCandidates for each repeated subsequence and determine which // instances are structurally similar to one another. - for (SuffixTree::RepeatedSubstring &RS : ST) { + + // Sort the suffix tree from longest substring to shortest. + std::vector RSes; + for (SuffixTree::RepeatedSubstring &RS : ST) + RSes.push_back(RS); + + llvm::stable_sort(RSes, [](const SuffixTree::RepeatedSubstring &LHS, + const SuffixTree::RepeatedSubstring &RHS) { + return LHS.Length > RHS.Length; + }); + for (SuffixTree::RepeatedSubstring &RS : RSes) { createCandidatesFromSuffixTree(Mapper, InstrList, IntegerMapping, RS, CandsForRepSubstring); if (CandsForRepSubstring.size() < 2) continue; - findCandidateStructures(CandsForRepSubstring, StructuralGroups); - for (std::pair &Group : StructuralGroups) + findCandidateStructures(CandsForRepSubstring, StructuralGroups, + IndexToIncludedCand, CandToGroup); + for (std::pair &Group : StructuralGroups) { // We only add the group if it contains more than one // IRSimilarityCandidate. If there is only one, that means there is no // other repeated subsequence with the same structure. - if (Group.second.size() > 1) + if (Group.second.size() > 1) { SimilarityCandidates->push_back(Group.second); + // Iterate over each candidate in the group, and add an entry for each + // instruction included with a mapping to a set of + // IRSimilarityCandidates that include that instruction. + for (IRSimilarityCandidate &IRCand : SimilarityCandidates->back()) { + for (unsigned Idx = IRCand.getStartIdx(), Edx = IRCand.getEndIdx(); + Idx <= Edx; ++Idx) { + DenseMap>::iterator + IdIt; + IdIt = IndexToIncludedCand.find(Idx); + bool Inserted = false; + if (IdIt == IndexToIncludedCand.end()) + std::tie(IdIt, Inserted) = IndexToIncludedCand.insert( + std::make_pair(Idx, DenseSet())); + IdIt->second.insert(&IRCand); + } + // Add mapping of candidate to the overall similarity group number. + CandToGroup.insert( + std::make_pair(&IRCand, SimilarityCandidates->size() - 1)); + } + } + } CandsForRepSubstring.clear(); StructuralGroups.clear(); diff --git a/llvm/test/Analysis/IRSimilarityIdentifier/basic.ll b/llvm/test/Analysis/IRSimilarityIdentifier/basic.ll index 79ae402e9f9f..1c08cb407c2e 100644 --- a/llvm/test/Analysis/IRSimilarityIdentifier/basic.ll +++ b/llvm/test/Analysis/IRSimilarityIdentifier/basic.ll @@ -4,7 +4,59 @@ ; This is a simple test to make sure the IRSimilarityIdentifier and ; IRSimilarityPrinterPass is working. -; CHECK: 4 candidates of length 2. Found in: +; CHECK: 4 candidates of length 6. Found in: +; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) +; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 +; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 +; CHECK-NEXT: Function: cat, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: fish, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: dog, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT:4 candidates of length 5. Found in: +; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) +; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 +; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 +; CHECK-NEXT: Function: cat, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: fish, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: dog, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT:4 candidates of length 4. Found in: +; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) +; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 +; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 +; CHECK-NEXT: Function: cat, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: fish, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: dog, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT:4 candidates of length 3. Found in: +; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) +; CHECK-NEXT: Start Instruction: store i32 4, ptr %4, align 4 +; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 +; CHECK-NEXT: Function: cat, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: fish, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: Function: dog, Basic Block: entry +; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 +; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT:4 candidates of length 2. Found in: ; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) ; CHECK-NEXT: Start Instruction: store i32 5, ptr %5, align 4 ; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 @@ -17,58 +69,6 @@ ; CHECK-NEXT: Function: dog, Basic Block: entry ; CHECK-NEXT: Start Instruction: store i32 4, ptr %4, align 4 ; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT:4 candidates of length 3. Found in: -; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) -; CHECK-NEXT: Start Instruction: store i32 4, ptr %4, align 4 -; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 -; CHECK-NEXT: Function: cat, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: fish, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: dog, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT:4 candidates of length 4. Found in: -; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) -; CHECK-NEXT: Start Instruction: store i32 3, ptr %3, align 4 -; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 -; CHECK-NEXT: Function: cat, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: fish, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: dog, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT:4 candidates of length 5. Found in: -; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) -; CHECK-NEXT: Start Instruction: store i32 2, ptr %2, align 4 -; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 -; CHECK-NEXT: Function: cat, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: fish, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: dog, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT:4 candidates of length 6. Found in: -; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) -; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 -; CHECK-NEXT: End Instruction: store i32 6, ptr %6, align 4 -; CHECK-NEXT: Function: cat, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: fish, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 -; CHECK-NEXT: Function: dog, Basic Block: entry -; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 -; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 define linkonce_odr void @fish() { entry: @@ -136,3 +136,5 @@ entry: store i32 5, ptr %5, align 4 ret void } +;; NOTE: These prefixes are unused and the list is autogenerated. Do not add tests below this line: +; CHECK: {{.*}} diff --git a/llvm/test/Analysis/IRSimilarityIdentifier/debug-inst-starts-block.ll b/llvm/test/Analysis/IRSimilarityIdentifier/debug-inst-starts-block.ll index 72fa36107758..78ecec92cc31 100644 --- a/llvm/test/Analysis/IRSimilarityIdentifier/debug-inst-starts-block.ll +++ b/llvm/test/Analysis/IRSimilarityIdentifier/debug-inst-starts-block.ll @@ -1,3 +1,4 @@ +; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 2 ; RUN: opt -disable-output -S -passes=print-ir-similarity < %s 2>&1 | FileCheck %s ; When a debug instruction is the first instruction in a block, when that block @@ -5,27 +6,27 @@ ; counted in similarity matching they must be ignored when creating canonical ; relations from one region to another. This checks that this is enforced. -; CHECK: 2 candidates of length 3. Found in: +; CHECK: 2 candidates of length 4. Found in: +; CHECK-NEXT: Function: main, Basic Block: entry +; CHECK-NEXT: Start Instruction: %0 = add i32 1, 4 +; CHECK-NEXT: End Instruction: %1 = sub i32 1, 4 +; CHECK-NEXT: Function: main, Basic Block: for.body169 +; CHECK-NEXT: Start Instruction: %2 = add i32 1, 4 +; CHECK-NEXT: End Instruction: %3 = sub i32 1, 4 +; CHECK-NEXT: 2 candidates of length 3. Found in: ; CHECK-NEXT: Function: main, Basic Block: entry ; CHECK-NEXT: Start Instruction: br label %for.body169 ; CHECK-NEXT: End Instruction: %1 = sub i32 1, 4 ; CHECK-NEXT: Function: main, Basic Block: for.body169 ; CHECK-NEXT: Start Instruction: br label %for.end122 ; CHECK-NEXT: End Instruction: %3 = sub i32 1, 4 -; CHECK-NEXT: 2 candidates of length 2. Found in: +; CHECK-NEXT: 2 candidates of length 2. Found in: ; CHECK-NEXT: Function: main, Basic Block: for.end122 ; CHECK-NEXT: Start Instruction: store i32 30, ptr undef, align 1 ; CHECK-NEXT: End Instruction: %1 = sub i32 1, 4 ; CHECK-NEXT: Function: main, Basic Block: for.end246 ; CHECK-NEXT: Start Instruction: store i32 0, ptr undef, align 1 ; CHECK-NEXT: End Instruction: %3 = sub i32 1, 4 -; CHECK-NEXT: 2 candidates of length 4. Found in: -; CHECK-NEXT: Function: main, Basic Block: entry -; CHECK-NEXT: Start Instruction: %0 = add i32 1, 4 -; CHECK-NEXT: End Instruction: %1 = sub i32 1, 4 -; CHECK-NEXT: Function: main, Basic Block: for.body169 -; CHECK-NEXT: Start Instruction: %2 = add i32 1, 4 -; CHECK-NEXT: End Instruction: %3 = sub i32 1, 4 source_filename = "irsimilarity_crash.ll" @@ -72,3 +73,5 @@ attributes #0 = { nocallback nofree nosync nounwind readnone speculatable willre !9 = !{} !10 = !DIBasicType(name: "long", size: 32, encoding: DW_ATE_signed) !11 = !DILocation(line: 522, column: 23, scope: !2) +;; NOTE: These prefixes are unused and the list is autogenerated. Do not add tests below this line: +; CHECK: {{.*}} diff --git a/llvm/test/Analysis/IRSimilarityIdentifier/different.ll b/llvm/test/Analysis/IRSimilarityIdentifier/different.ll index 701af7e21b32..e5c9970b159b 100644 --- a/llvm/test/Analysis/IRSimilarityIdentifier/different.ll +++ b/llvm/test/Analysis/IRSimilarityIdentifier/different.ll @@ -5,20 +5,20 @@ ; return items only within the same function when there are different sets of ; instructions in functions. -; CHECK: 2 candidates of length 3. Found in: -; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) -; CHECK-NEXT: Start Instruction: %b = load i32, ptr %1, align 4 -; CHECK-NEXT: End Instruction: %d = load i32, ptr %3, align 4 -; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) -; CHECK-NEXT: Start Instruction: %a = load i32, ptr %0, align 4 -; CHECK-NEXT: End Instruction: %c = load i32, ptr %2, align 4 -; CHECK-NEXT: 2 candidates of length 5. Found in: +; CHECK: 2 candidates of length 5. Found in: ; CHECK-NEXT: Function: fish, Basic Block: entry ; CHECK-NEXT: Start Instruction: store i32 6, ptr %0, align 4 ; CHECK-NEXT: End Instruction: store i32 4, ptr %4, align 4 ; CHECK-NEXT: Function: fish, Basic Block: entry ; CHECK-NEXT: Start Instruction: store i32 1, ptr %1, align 4 ; CHECK-NEXT: End Instruction: store i32 5, ptr %5, align 4 +; CHECK-NEXT: 2 candidates of length 3. Found in: +; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) +; CHECK-NEXT: Start Instruction: %b = load i32, ptr %1, align 4 +; CHECK-NEXT: End Instruction: %d = load i32, ptr %3, align 4 +; CHECK-NEXT: Function: turtle, Basic Block: (unnamed) +; CHECK-NEXT: Start Instruction: %a = load i32, ptr %0, align 4 +; CHECK-NEXT: End Instruction: %c = load i32, ptr %2, align 4 define linkonce_odr void @fish() { entry: @@ -44,3 +44,5 @@ define void @turtle(ptr %0, ptr %1, ptr %2, ptr %3) { %d = load i32, ptr %3 ret void } +;; NOTE: These prefixes are unused and the list is autogenerated. Do not add tests below this line: +; CHECK: {{.*}} diff --git a/llvm/test/Analysis/IRSimilarityIdentifier/nothing.ll b/llvm/test/Analysis/IRSimilarityIdentifier/nothing.ll index 5c7210790f47..4891a587d776 100644 --- a/llvm/test/Analysis/IRSimilarityIdentifier/nothing.ll +++ b/llvm/test/Analysis/IRSimilarityIdentifier/nothing.ll @@ -10,3 +10,5 @@ define linkonce_odr void @fish() { entry: ret void } +;; NOTE: These prefixes are unused and the list is autogenerated. Do not add tests below this line: +; CHECK: {{.*}} diff --git a/llvm/test/Transforms/IROutliner/illegal-assumes.ll b/llvm/test/Transforms/IROutliner/illegal-assumes.ll index b91f8ec92200..d863fe7a2990 100644 --- a/llvm/test/Transforms/IROutliner/illegal-assumes.ll +++ b/llvm/test/Transforms/IROutliner/illegal-assumes.ll @@ -1,5 +1,5 @@ ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py -; RUN: opt -S -passes=verify,iroutliner -ir-outlining-no-cost < %s | FileCheck %s +; RUN: opt -S -p iroutliner,verify -ir-outlining-no-cost < %s | FileCheck %s ; This test ensures that we do not include llvm.assumes. There are exceptions ; in the CodeExtractor's algorithm for llvm.assumes, so we ignore it for now. @@ -13,13 +13,13 @@ define void @outline_assumes() { ; CHECK-NEXT: [[C:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[D:%.*]] = alloca i1, align 4 ; CHECK-NEXT: call void @llvm.lifetime.start.p0(i64 -1, ptr [[DL_LOC]]) -; CHECK-NEXT: call void @outlined_ir_func_3(i1 true, ptr [[D]], ptr [[DL_LOC]]) +; CHECK-NEXT: call void @outlined_ir_func_4(i1 true, ptr [[D]], ptr [[DL_LOC]]) ; CHECK-NEXT: [[DL_RELOAD:%.*]] = load i1, ptr [[DL_LOC]], align 1 ; CHECK-NEXT: call void @llvm.lifetime.end.p0(i64 -1, ptr [[DL_LOC]]) ; CHECK-NEXT: [[SPLIT_INST:%.*]] = sub i1 [[DL_RELOAD]], [[DL_RELOAD]] -; CHECK-NEXT: call void @outlined_ir_func_0(ptr [[A]], ptr [[B]], ptr [[C]]) -; CHECK-NEXT: call void @llvm.assume(i1 [[DL_RELOAD]]) ; CHECK-NEXT: call void @outlined_ir_func_1(ptr [[A]], ptr [[B]], ptr [[C]]) +; CHECK-NEXT: call void @llvm.assume(i1 [[DL_RELOAD]]) +; CHECK-NEXT: call void @outlined_ir_func_2(ptr [[A]], ptr [[B]], ptr [[C]]) ; CHECK-NEXT: ret void ; entry: @@ -49,12 +49,12 @@ define void @outline_assumes2() { ; CHECK-NEXT: [[C:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[D:%.*]] = alloca i1, align 4 ; CHECK-NEXT: call void @llvm.lifetime.start.p0(i64 -1, ptr [[DL_LOC]]) -; CHECK-NEXT: call void @outlined_ir_func_3(i1 false, ptr [[D]], ptr [[DL_LOC]]) +; CHECK-NEXT: call void @outlined_ir_func_4(i1 false, ptr [[D]], ptr [[DL_LOC]]) ; CHECK-NEXT: [[DL_RELOAD:%.*]] = load i1, ptr [[DL_LOC]], align 1 ; CHECK-NEXT: call void @llvm.lifetime.end.p0(i64 -1, ptr [[DL_LOC]]) -; CHECK-NEXT: call void @outlined_ir_func_0(ptr [[A]], ptr [[B]], ptr [[C]]) -; CHECK-NEXT: call void @llvm.assume(i1 [[DL_RELOAD]]) ; CHECK-NEXT: call void @outlined_ir_func_1(ptr [[A]], ptr [[B]], ptr [[C]]) +; CHECK-NEXT: call void @llvm.assume(i1 [[DL_RELOAD]]) +; CHECK-NEXT: call void @outlined_ir_func_2(ptr [[A]], ptr [[B]], ptr [[C]]) ; CHECK-NEXT: ret void ; entry: @@ -77,16 +77,17 @@ entry: define void @outline_assumes3() { ; CHECK-LABEL: @outline_assumes3( ; CHECK-NEXT: entry: +; CHECK-NEXT: [[DL_LOC:%.*]] = alloca i1, align 1 ; CHECK-NEXT: [[A:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[B:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[C:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[D:%.*]] = alloca i1, align 4 -; CHECK-NEXT: store i1 true, ptr [[D]], align 4 -; CHECK-NEXT: [[DL:%.*]] = load i1, ptr [[D]], align 1 -; CHECK-NEXT: [[SPLIT_INST:%.*]] = add i1 [[DL]], [[DL]] -; CHECK-NEXT: call void @outlined_ir_func_0(ptr [[A]], ptr [[B]], ptr [[C]]) -; CHECK-NEXT: call void @llvm.assume(i1 [[DL]]) -; CHECK-NEXT: call void @outlined_ir_func_2(ptr [[A]]) +; CHECK-NEXT: call void @llvm.lifetime.start.p0(i64 -1, ptr [[DL_LOC]]) +; CHECK-NEXT: call void @outlined_ir_func_0(i1 true, ptr [[D]], ptr [[A]], ptr [[B]], ptr [[C]], ptr [[DL_LOC]]) +; CHECK-NEXT: [[DL_RELOAD:%.*]] = load i1, ptr [[DL_LOC]], align 1 +; CHECK-NEXT: call void @llvm.lifetime.end.p0(i64 -1, ptr [[DL_LOC]]) +; CHECK-NEXT: call void @llvm.assume(i1 [[DL_RELOAD]]) +; CHECK-NEXT: call void @outlined_ir_func_3(ptr [[A]]) ; CHECK-NEXT: ret void ; entry: @@ -109,16 +110,17 @@ entry: define void @outline_assumes4() { ; CHECK-LABEL: @outline_assumes4( ; CHECK-NEXT: entry: +; CHECK-NEXT: [[DL_LOC:%.*]] = alloca i1, align 1 ; CHECK-NEXT: [[A:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[B:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[C:%.*]] = alloca i32, align 4 ; CHECK-NEXT: [[D:%.*]] = alloca i1, align 4 -; CHECK-NEXT: store i1 false, ptr [[D]], align 4 -; CHECK-NEXT: [[DL:%.*]] = load i1, ptr [[D]], align 1 -; CHECK-NEXT: [[SPLIT_INST:%.*]] = add i1 [[DL]], [[DL]] -; CHECK-NEXT: call void @outlined_ir_func_0(ptr [[A]], ptr [[B]], ptr [[C]]) -; CHECK-NEXT: call void @llvm.assume(i1 [[DL]]) -; CHECK-NEXT: call void @outlined_ir_func_2(ptr [[A]]) +; CHECK-NEXT: call void @llvm.lifetime.start.p0(i64 -1, ptr [[DL_LOC]]) +; CHECK-NEXT: call void @outlined_ir_func_0(i1 false, ptr [[D]], ptr [[A]], ptr [[B]], ptr [[C]], ptr [[DL_LOC]]) +; CHECK-NEXT: [[DL_RELOAD:%.*]] = load i1, ptr [[DL_LOC]], align 1 +; CHECK-NEXT: call void @llvm.lifetime.end.p0(i64 -1, ptr [[DL_LOC]]) +; CHECK-NEXT: call void @llvm.assume(i1 [[DL_RELOAD]]) +; CHECK-NEXT: call void @outlined_ir_func_3(ptr [[A]]) ; CHECK-NEXT: ret void ; entry: