Until recently, if an event attempting to deliver an fd to a zombie
object was demarshalled after the object was made into a zombie, we
leaked the fd and left it in the buffer.
If another event attempting to deliver an fd to a live object was in that
same buffer, the zombie's fd would be delivered instead.
This test recreates that situation.
While this is a ridiculously contrived way to force this race - delivering
an event from a destruction handler - I do have reports of this race
being hit in real world code.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Until recently, if a client destroying a resource raced with the
server generating an event on that resource that delivered a file
descriptor, we would leak the fd.
This tests for a leaked fd from that race condition.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
The existing specification was not explicitly clear on when
wl_subcompositor.get_subsurface request actually adds the sub-surface to
the parent in the compositor's scenegraph. The implicit assumption was
that this happens immediately, but it was not written anywhere.
If it happens immediately, the client doing things in a wrong order may
cause a glitch on screen. Particularly, if the wl_surface B that is
going to be a sub-surface for wl_surface A (the parent) already has a
buffer committed, and the parent surface is mapped, then get_subsurface
will (may?) cause wl_surface B to become mapped immediately. That leaves
no time to set up the sub-surface z-order or position before mapping,
hence there can be a visible glitch.
The way to avoid that, given that the parent surface is mapped, is to
not commit a buffer to wl_surface B until all the sub-surface setup is
done.
However, doing the sub-surface setup always requires a wl_surface.commit
on the parent surface unless the defaults happen to be correct.
To make setting up a subsurface slightly easier by removing one
possibility for a glitch, this patch amends the specification to require
a wl_surface.commit on the parent surface for get_subsurface to
complete. The sub-surface cannot become mapped before a parent commit.
This change may break existing clients that relied on the glitchy
sequence to not need a parent surface commit to map the sub-surface.
However, presumably all uses would at least issue a
wl_subsurface.set_position, which requires a parent surface commit to
apply. That would guarantee that there is a parent surface commit after
get_subsurface, and so reduces the chances of breaking anything.
In other cases, this change may simply remove a possibility for the
glitch.
This patch also adds a note about changing wl_surface.commit behaviour
on wl_subcompositor.get_subsurface. (That could be a separate patch.)
The behaviour of wl_subsurface.destroy remains as specified, even though
it is now slightly asymmetrical to get_subsurface. This is emphasized by
adding the word "immediately". The effects of destruction were already
explicitly documented, as is the way to achieve synchronized unmapping,
so changing destruction behaviour would likely be more disruptive, and
also open up more corner cases (what would happen between destroy and
unmapping?).
Bug: https://phabricator.freedesktop.org/T7358
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Now that xdg_shell is stable and much better defined than wl_shell we
can finally deprecate wl_shell and guide users towards xdg_shell
instead.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
I've heard some complaints that wl_display.get_registry "leaks"
server memory because wl_registry has no destructor. While this isn't
strictly true - all those resources are freed when the client
disconnects - it's a bit of a gotcha for neophytes.
Since wl_registry's version is not requested in any way through
wl_display.get_registry, we can't add a destructor request without
breaking ABI. So let's be a little more clear about the result
of getting too many wl_registry objects.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Unlike a wheel rotation, a wheel tilt is a discrete-only axis. Wheel rotations
are mapped to degrees in libinput but that that does not apply to wheel tilt
axes where there is no physical equivalent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
8 spaces changed to one tab
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Because we already rely on it in the callers anyway. This is a retrofit, which
is not ideal but I'm not sure any compositor out there uses anything else.
Might as well define it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This CL updates the wl_touch interface with a shape and
orientation event.
The shape/orientation of a touch point is not relevant for most UI
applications, but allows a better experience in some cases
such as drawing apps.
The events are used by the compositor to inform the client
about changes in the shape and orientation of a touchpoint, which is
approximated by an ellipse and it's angle to the y-axis.
The event is optional and only sent when compositor and the
touch device support this type of information. The client is
responsible for making a reasonable assumption about the
touch shape if no shape is reported.
Signed-off-by: Dennis Kempin <denniskempin@google.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Enum entries and message arguments are sometimes preceded by a blank line, but
often aren't.
Standardize the format of the protocol specification by removing blank lines
preceding a list of message arguments and enum entries.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The protocol describes wl_shm as a "global singleton" rather than
"singleton global," which is the order used throughout other protocol
object descriptions.
Re-order the terms for consistency.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Other singleton objects in the protocol are described as such.
Add a singleton adjective to the wl_registry description, making it
similar to other descriptions.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The use of # within a description causes the documentation generator
to mistake C syntax with a documentation link.
Remove the # from the documentation, suppressing the warning.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Specify x and y args as the upper left corner of the surface / buffer
damage rectangle.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Change "serial" to "serial number" in arg summaries, for consistency
and clarity.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Summary attributes sometime describe objects using their wl-prefixed type,
but more often don't.
Remove the wl_ prefix from summary descriptions, since they tend to describe
concepts.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Outputs come and go, and this is needed to clean up wl_resources on the
server side. All protocol objects need a way to be destroyed.
Cc: Neil Roberts <neil@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
[Pekka: added commit message]
All vertical whitespace should manifest as a single blank line, never two.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The enum attribute, for which scanner support was introduced in
1771299, can be used to link message arguments to <enum>s. However,
some arguments refer to <enum>s in a different <interface>.
This adds scanner support for referring to an <enum> in a different
<interface> using dot notation. It also sets the attributes in this
style in the wayland XML protocol (wl_shm_pool::create_buffer::format
to wl_shm::format, and wl_surface::set_buffer_transform::transform to
wl_output::transform), and updates the documentation XSL so that this
new style is supported.
Changes since v2:
- add object:: prefix for all enumerations in the documentation
- fix whitespace in scanner.c
- minor code fixup to return early and avoid casts in scanner.c
Changes since v1:
- several implementation bugs fixed
Signed-off-by: Auke Booij <auke@tulcod.com>
Reviewed-by: Nils Christopher Brause <nilschrbrause@googlemail.com>
Reviewed-by: Bill Spitzak <spitzak@gmail.com>
[Pekka: rebased across cde251a124]
[Pekka: wrap lines and space fixes in scanner.c]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All event arg elements now have an appropriate summary attribute.
This was conducted mostly in response to the undocumented parameter
warnings generated during 'make check'.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Remove superfluous 'local' from 'buffer local'.
In addition, simplify the phrasing of local x/y coordinates in parameter
summaries.
See https://lists.freedesktop.org/archives/wayland-devel/2016-April/028249.html.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Fix grammar, spelling, tense, and other inconsistencies, based on
correctness, consistency, and precedence both here and influenced
by wayland-protocols.
- Standardize lower case for summary attribute values.
- Minor vertical whitespace removal consistency.
- Standarize references to coordinates, preferring 'surface local'
- Fix spelling, grammar, tense, and punctuation.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Add a note to the wl_data_device_manager global interface about the
different requirements for operating the objects created from the bound
global.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
These 2 requests have been added:
- wl_data_source.set_actions: Notifies the compositor of the available
actions on the data source.
- wl_data_offer.set_actions: Notifies the compositor of the available
actions on the destination side, plus the preferred action.
Out of the data from these requests, the compositor can determine the action
both parts agree on (and let the user play a role through eg. keyboard
modifiers). The chosen option will be notified to both parties
through the following two requests:
- wl_data_source.action
- wl_data_offer.action
In addition, the destination side can peek the source side actions through
wl_data_offer.source_actions.
Compared to the XDND protocol, there's two notable changes:
- XDND lets the source suggest an action, whereas wl_data_device lets
the destination prefer a given action. The difference is subtle here,
it comes off as convenience because it is the drag destination which
receives the motion events (unlike in X) and can perform action updates.
The drag destination seems also in a better position to update the
preferred action based on things like the data being transferred, the
place being dropped, and whether the drag is client-local.
- That same source-side preferred action is used in XDND to convey the
modifier-induced action to the drag destination, which would then ack
it, or reply with another action that's accepted (or none), this makes
the XdndPosition/XdndStatus messaging very verbose, and synchronous
because the drag source always needs to know the latest status/action
for every position+action sent.
Here it's the compositor which takes care of modifiers and matching
available/accepted actions, this allows for the signaling to happen
only whenever the actions/modifiers change for real.
Roughly based on previous work by Giulio Camuffo <giuliocamuffo@gmail.com>
Changes since v10:
- Narrow down the situations where wl_data_source/offer.accept requests
are supposed to happen.
Changes since v9:
- Deferred the protocol errors to .finish after some IRC chat with Jonas,
added further errors if actions API is used on selection sources/offers.
Changes since v8:
- Defined further the expected behavior on "ask", described the protocol
errors that may happen. Fix more spaces vs tabs issues.
Changes since v7:
- Misc changes after updating the progress notification patch.
Changes since v6:
- Further explanations on wl_data_source/offer.set_actions, including a
description of "ask" actions. Added protocol errors for unknown action
values.
Changes since v5:
- Applied rewording suggestions from Jonas Ådahl. Dropped slot reservation
scheme for actions. Fixed indentation and other minor formatting issues.
Changes since v4:
- Minor rewording.
Changes since v3:
- Splitted from DnD progress notification changes.
- Further rationales in commit log.
Changes since v2:
- Renamed notify_actions to set_actions on both sides, seems more consistent
with the rest of the protocol.
- Spelled out better which events may be triggered on the compositor side
by the requests, the circumstances in which events are emitted, and
what are events useful for in clients.
- Defined a minimal common ground wrt compositor-side action picking and
keybindings.
- Acknowledge the possibility of compositor/toolkit defined actions, even
though none are used at the moment.
Changes since v1:
- Added wl_data_offer.source_actions to let know of the actions offered
by a data source.
- Renamed wl_data_source.finished to "drag_finished" for clarity
- Improved wording as suggested by Bryce
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michael Catanzaro <mcatanzaro@igalia.com>
Reviewed-by: Mike Blumenkrantz <zmike@samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Currently, there's no means for the DnD origin to know whether the
destination is actually finished with the DnD transaction, short of
finalizing it after the first transfer finishes, or leaking it forever.
But this poses other interoperation problems, drag destinations might
be requesting several mimetypes at once, might be just poking to find
out the most suitable format, might want to defer the action to a popup,
might be poking contents early before the selection was dropped...
In addition, data_source.cancelled is suitable for the situations where
the DnD operation fails (not on a drop target, no matching mimetypes,
etc..), but seems undocumented for that use (and unused in weston's DnD).
In order to improve the situation, the drag source should be notified
of all stages of DnD. In addition to documenting the "cancelled" event
for DnD purposes, The following 2 events have been added:
- wl_data_source.dnd_drop_performed: Happens when the operation has been
physically finished (eg. the button is released), it could be the right
place to reset the pointer cursor back and undo any other state resulting
from the initial button press.
- wl_data_source.dnd_finished: Happens when the destination side destroys
the wl_data_offer, at this point the source can just forget all data
related to the DnD selection as well, plus optionally deleting the data
on move operations.
Changes since v6:
- Turned wl_data_offer.finish calls with 0/NULL state/mimetype an
error, made it explicit that it will only result in
wl_data_offer.dnd_finished being sent if successful.
Changes since v5:
- Further rewording of wl_data_offer.finish and wl_data_offer.accept.
Added error for untimely wl_data_offer.finish requests.
Changes since v4:
- Applied rewording suggestions from Jonas Ådahl. Added new
wl_data_offer.finish request to allow explicit finalization on the
destination side.
Changes since v3:
- Renamed dnd_performed to a more descriptive dnd_drop_performed,
documented backwards compatible behavior on wl_data_offer.accept and
wl_data_source.cancelled.
Changes since v2:
- Minor rewording.
Changes since v1:
- Renamed events to have a common "dnd" namespace. Made dnd_performed to
happen invariably, data_device.cancelled may still happen afterwards.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michael Catanzaro <mcatanzaro@igalia.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The frame event groups separate pointer events together. The primary use-case
for this at the moment is diagonal scrolling - a vertical/horizontal scroll
event can be grouped together to calculate the correct motion vector.
Frame events group all wl_pointer events. An example sequence of motion events
followed by a diagonal scroll followed by a button event is:
wl_pointer.motion
wl_pointer.frame
wl_pointer.motion
wl_pointer.frame
wl_pointer.axis
wl_pointer.axis
wl_pointer.frame
wl_pointer.button
wl_pointer.frame
In the future, other extensions may insert additional information about an
event into the frame. For example, an extension may add information about the
physical device that generated an event into the frame. For this reason,
enter/leave events are grouped by a frame event too.
The axis_source event determines how an axis event was generated. That enables
clients to judge when to use kinetic scrolling. Only one axis_source event is
allowed per frame and applies to all events in this frame.
The axis_stop event notifies a client about the termination of a scroll
sequence, likewise needed to calculate kinetic scrolling parameters.
Multiple axis_stop events within the same frame indicate that scrolling has
stopped in all these axis at the same time.
The axis_discrete event provides the wheel click count. Previously the axis
value was some hardcoded number (10), with the discrete steps this enables a
client to differ between line-based scrolling on a mouse wheel and smooth
scrolling with a touchpad. The axis_discrete event carries the axis
information and the discrete value and can occur at any time in the frame
provided it is ordered before the matching axis event. Specifically, this
sequence is valid:
wl_pointer.axis_source
wl_pointer.axis_discrete (vert)
wl_pointer.axis_discrete (horiz)
wl_pointer.axis (horiz)
wl_pointer.axis (vert)
wl_pointer.frame
Enter and leave event also trigger wl_pointer.frame events, where possible the
compositor should group leave and subsequent enter into the same frame. This
indicates to the client that the pointer has moved between surfaces and may
allow a client to shortcut code otherwise triggerd by the leave or enter
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Also applies to touch/keyboard
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
wl_surface.damage uses surface local co-ordinates.
Buffer scale and buffer transforms came along, and EGL surfaces
have no understanding of them.
Theoretically, clients pass damage rectangles - in Y-inverted surface
co-ordinates) to EGLSwapBuffersWithDamage, and the EGL implementation
passed them on to wayland. However, for this to work the EGL
implementation must be able to flip those rectangles into the space
the compositor is expecting, but it's unable to do so because it
doesn't know the height of the transformed buffer.
So, currently, EGLSwapBuffersWithDamage is unusable and EGLSwapBuffers
has to pass (0,0) - (INT32_MAX, INT32_MAX) damage to function.
wl_surface.damage_buffer allows damage to be registered on a surface
in buffer co-ordinates, avoiding this problem.
Credit where it's due, these ideas are not entirely my own:
Over a year ago the idea of changing damage co-ordinates to buffer
co-ordinates was suggested (by Jason Ekstrand), and it was at least
partially rejected and abandoned. At the time it was also suggested
(by Pekka Paalanen) that adding a new wl_surface.damage_buffer request
was another option.
This will eventually resolve:
https://bugs.freedesktop.org/show_bug.cgi?id=78190
by making the problem irrelevant.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The documentation for wl_surface.commit makes it clear that the
application of damage follows attach during the commit, so it
doesn't matter what order the app sends the requests.
Many existing apps post damage before attaching a buffer already,
and it's really quite reasonable to do so.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
See 851614fa78
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Auke Booij <auke@tulcod.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The scanner parses this already, it doesn't do anything with it though.
The DTD requires the order to be copyright, description, then the interfaces.
That's largely a DTD limitation, the scanner doesn't care.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This reverts commit 06fb8bd371.
Having a DTD hooked up gives an indication of what we expect the protocol to
be, which is a clearer documentation than the current "whatever scanner.c
manages to parse".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The wayland scanner defines the protocol. The DTD specification is not used.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Nils Christopher Brause <nilschrbrause@googlemail.com>
This is required if we want to correctly remove a wl_seat compositor-side. A
wl_seat is announced as a global object, then it is bound by the client. When
the compositor wants to remove the seat, it shall announce the global removal of
the object. The client can then call the release request on the wl_seat (which
means I won't use that object anymore).
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Add note about what all wl_pointer.release does. Mainly that
it destroys the proxy object, so programmer must not call
wl_pointer_destroy() on the pointer any further.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change wording to be more consistent with other parts of the subsurface
protocol. Before this change, wl_subsurface.set_position explicitly
stated that the new state was to be applied on the parents
wl_surface.commit and wl_subsurface.place_above/below only said "on
the next commit of the parent surface". What "committed" means is
ambiguous considering that a wl_surface.commit actually defers the
actual commit when in synchronized mode, but the intention has always
been that placement of a subsurface should be considered part of its
content, i.e. placement state should be applied when other state
(buffer, regions). This patch makes that more clear.
Note that prior to this patch, one could correctly have interpreted
the protocol meaning that placements operations takes effect explicitly
on wl_surface.commit of the parent surface no matter whether other state
of the parent surface is applied at that point. This patch clarifies that
that is not the case.
https://bugs.freedesktop.org/show_bug.cgi?id=88857
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Clarify that a client receiving a wl_data_device.selection event must
destroy the data_offer of the previous wl_data_device.selection event,
if any.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
