tmp_suning_uos_patched/kernel/cgroup/freezer.c

324 lines
7.8 KiB
C
Raw Permalink Normal View History

cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
//SPDX-License-Identifier: GPL-2.0
#include <linux/cgroup.h>
#include <linux/sched.h>
#include <linux/sched/task.h>
#include <linux/sched/signal.h>
#include "cgroup-internal.h"
#include <trace/events/cgroup.h>
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
/*
* Propagate the cgroup frozen state upwards by the cgroup tree.
*/
static void cgroup_propagate_frozen(struct cgroup *cgrp, bool frozen)
{
int desc = 1;
/*
* If the new state is frozen, some freezing ancestor cgroups may change
* their state too, depending on if all their descendants are frozen.
*
* Otherwise, all ancestor cgroups are forced into the non-frozen state.
*/
while ((cgrp = cgroup_parent(cgrp))) {
if (frozen) {
cgrp->freezer.nr_frozen_descendants += desc;
if (!test_bit(CGRP_FROZEN, &cgrp->flags) &&
test_bit(CGRP_FREEZE, &cgrp->flags) &&
cgrp->freezer.nr_frozen_descendants ==
cgrp->nr_descendants) {
set_bit(CGRP_FROZEN, &cgrp->flags);
cgroup_file_notify(&cgrp->events_file);
TRACE_CGROUP_PATH(notify_frozen, cgrp, 1);
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
desc++;
}
} else {
cgrp->freezer.nr_frozen_descendants -= desc;
if (test_bit(CGRP_FROZEN, &cgrp->flags)) {
clear_bit(CGRP_FROZEN, &cgrp->flags);
cgroup_file_notify(&cgrp->events_file);
TRACE_CGROUP_PATH(notify_frozen, cgrp, 0);
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
desc++;
}
}
}
}
/*
* Revisit the cgroup frozen state.
* Checks if the cgroup is really frozen and perform all state transitions.
*/
void cgroup_update_frozen(struct cgroup *cgrp)
{
bool frozen;
lockdep_assert_held(&css_set_lock);
/*
* If the cgroup has to be frozen (CGRP_FREEZE bit set),
* and all tasks are frozen and/or stopped, let's consider
* the cgroup frozen. Otherwise it's not frozen.
*/
frozen = test_bit(CGRP_FREEZE, &cgrp->flags) &&
cgrp->freezer.nr_frozen_tasks == __cgroup_task_count(cgrp);
if (frozen) {
/* Already there? */
if (test_bit(CGRP_FROZEN, &cgrp->flags))
return;
set_bit(CGRP_FROZEN, &cgrp->flags);
} else {
/* Already there? */
if (!test_bit(CGRP_FROZEN, &cgrp->flags))
return;
clear_bit(CGRP_FROZEN, &cgrp->flags);
}
cgroup_file_notify(&cgrp->events_file);
TRACE_CGROUP_PATH(notify_frozen, cgrp, frozen);
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
/* Update the state of ancestor cgroups. */
cgroup_propagate_frozen(cgrp, frozen);
}
/*
* Increment cgroup's nr_frozen_tasks.
*/
static void cgroup_inc_frozen_cnt(struct cgroup *cgrp)
{
cgrp->freezer.nr_frozen_tasks++;
}
/*
* Decrement cgroup's nr_frozen_tasks.
*/
static void cgroup_dec_frozen_cnt(struct cgroup *cgrp)
{
cgrp->freezer.nr_frozen_tasks--;
WARN_ON_ONCE(cgrp->freezer.nr_frozen_tasks < 0);
}
/*
* Enter frozen/stopped state, if not yet there. Update cgroup's counters,
* and revisit the state of the cgroup, if necessary.
*/
void cgroup_enter_frozen(void)
{
struct cgroup *cgrp;
if (current->frozen)
return;
spin_lock_irq(&css_set_lock);
current->frozen = true;
cgrp = task_dfl_cgroup(current);
cgroup_inc_frozen_cnt(cgrp);
cgroup_update_frozen(cgrp);
spin_unlock_irq(&css_set_lock);
}
/*
* Conditionally leave frozen/stopped state. Update cgroup's counters,
* and revisit the state of the cgroup, if necessary.
*
* If always_leave is not set, and the cgroup is freezing,
* we're racing with the cgroup freezing. In this case, we don't
* drop the frozen counter to avoid a transient switch to
* the unfrozen state.
*/
void cgroup_leave_frozen(bool always_leave)
{
struct cgroup *cgrp;
spin_lock_irq(&css_set_lock);
cgrp = task_dfl_cgroup(current);
if (always_leave || !test_bit(CGRP_FREEZE, &cgrp->flags)) {
cgroup_dec_frozen_cnt(cgrp);
cgroup_update_frozen(cgrp);
WARN_ON_ONCE(!current->frozen);
current->frozen = false;
} else if (!(current->jobctl & JOBCTL_TRAP_FREEZE)) {
spin_lock(&current->sighand->siglock);
current->jobctl |= JOBCTL_TRAP_FREEZE;
set_thread_flag(TIF_SIGPENDING);
spin_unlock(&current->sighand->siglock);
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
}
spin_unlock_irq(&css_set_lock);
}
/*
* Freeze or unfreeze the task by setting or clearing the JOBCTL_TRAP_FREEZE
* jobctl bit.
*/
static void cgroup_freeze_task(struct task_struct *task, bool freeze)
{
unsigned long flags;
/* If the task is about to die, don't bother with freezing it. */
if (!lock_task_sighand(task, &flags))
return;
if (freeze) {
task->jobctl |= JOBCTL_TRAP_FREEZE;
signal_wake_up(task, false);
} else {
task->jobctl &= ~JOBCTL_TRAP_FREEZE;
wake_up_process(task);
}
unlock_task_sighand(task, &flags);
}
/*
* Freeze or unfreeze all tasks in the given cgroup.
*/
static void cgroup_do_freeze(struct cgroup *cgrp, bool freeze)
{
struct css_task_iter it;
struct task_struct *task;
lockdep_assert_held(&cgroup_mutex);
spin_lock_irq(&css_set_lock);
if (freeze)
set_bit(CGRP_FREEZE, &cgrp->flags);
else
clear_bit(CGRP_FREEZE, &cgrp->flags);
spin_unlock_irq(&css_set_lock);
if (freeze)
TRACE_CGROUP_PATH(freeze, cgrp);
else
TRACE_CGROUP_PATH(unfreeze, cgrp);
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
css_task_iter_start(&cgrp->self, 0, &it);
while ((task = css_task_iter_next(&it))) {
/*
* Ignore kernel threads here. Freezing cgroups containing
* kthreads isn't supported.
*/
if (task->flags & PF_KTHREAD)
continue;
cgroup_freeze_task(task, freeze);
}
css_task_iter_end(&it);
/*
* Cgroup state should be revisited here to cover empty leaf cgroups
* and cgroups which descendants are already in the desired state.
*/
spin_lock_irq(&css_set_lock);
if (cgrp->nr_descendants == cgrp->freezer.nr_frozen_descendants)
cgroup_update_frozen(cgrp);
spin_unlock_irq(&css_set_lock);
}
/*
* Adjust the task state (freeze or unfreeze) and revisit the state of
* source and destination cgroups.
*/
void cgroup_freezer_migrate_task(struct task_struct *task,
struct cgroup *src, struct cgroup *dst)
{
lockdep_assert_held(&css_set_lock);
/*
* Kernel threads are not supposed to be frozen at all.
*/
if (task->flags & PF_KTHREAD)
return;
/*
* It's not necessary to do changes if both of the src and dst cgroups
* are not freezing and task is not frozen.
*/
if (!test_bit(CGRP_FREEZE, &src->flags) &&
!test_bit(CGRP_FREEZE, &dst->flags) &&
!task->frozen)
return;
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
/*
* Adjust counters of freezing and frozen tasks.
* Note, that if the task is frozen, but the destination cgroup is not
* frozen, we bump both counters to keep them balanced.
*/
if (task->frozen) {
cgroup_inc_frozen_cnt(dst);
cgroup_dec_frozen_cnt(src);
}
cgroup_update_frozen(dst);
cgroup_update_frozen(src);
/*
* Force the task to the desired state.
*/
cgroup_freeze_task(task, test_bit(CGRP_FREEZE, &dst->flags));
}
void cgroup_freeze(struct cgroup *cgrp, bool freeze)
{
struct cgroup_subsys_state *css;
struct cgroup *dsct;
bool applied = false;
lockdep_assert_held(&cgroup_mutex);
/*
* Nothing changed? Just exit.
*/
if (cgrp->freezer.freeze == freeze)
return;
cgrp->freezer.freeze = freeze;
/*
* Propagate changes downwards the cgroup tree.
*/
css_for_each_descendant_pre(css, &cgrp->self) {
dsct = css->cgroup;
if (cgroup_is_dead(dsct))
continue;
if (freeze) {
dsct->freezer.e_freeze++;
/*
* Already frozen because of ancestor's settings?
*/
if (dsct->freezer.e_freeze > 1)
continue;
} else {
dsct->freezer.e_freeze--;
/*
* Still frozen because of ancestor's settings?
*/
if (dsct->freezer.e_freeze > 0)
continue;
WARN_ON_ONCE(dsct->freezer.e_freeze < 0);
}
/*
* Do change actual state: freeze or unfreeze.
*/
cgroup_do_freeze(dsct, freeze);
applied = true;
}
/*
* Even if the actual state hasn't changed, let's notify a user.
* The state can be enforced by an ancestor cgroup: the cgroup
* can already be in the desired state or it can be locked in the
* opposite state, so that the transition will never happen.
* In both cases it's better to notify a user, that there is
* nothing to wait for.
*/
if (!applied) {
TRACE_CGROUP_PATH(notify_frozen, cgrp,
test_bit(CGRP_FROZEN, &cgrp->flags));
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
cgroup_file_notify(&cgrp->events_file);
}
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-20 01:03:04 +08:00
}