luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0f329075fb
tmp_suning_uos_patched/drivers/i2c/busses/Kconfig

511 lines
15 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Sensor device configuration
#
menu "I2C Hardware Bus support"
depends on I2C
config I2C_ALI1535
tristate "ALI 1535"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
controller is part of the 7101 device, which is an ACPI-compliant
Power Management Unit (PMU).
This driver can also be built as a module. If so, the module
will be called i2c-ali1535.
config I2C_ALI1563
tristate "ALI 1563"
depends on I2C && PCI && EXPERIMENTAL
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
controller is part of the 7101 device, which is an ACPI-compliant
Power Management Unit (PMU).
This driver can also be built as a module. If so, the module
will be called i2c-ali1563.
config I2C_ALI15X3
tristate "ALI 15x3"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
This driver can also be built as a module. If so, the module
will be called i2c-ali15x3.
config I2C_AMD756
tristate "AMD 756/766/768/8111 and nVidia nForce"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the AMD
756/766/768 mainboard I2C interfaces. The driver also includes
support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
the nVidia nForce I2C interface.
This driver can also be built as a module. If so, the module
will be called i2c-amd756.
config I2C_AMD756_S4882
tristate "SMBus multiplexing on the Tyan S4882"
depends on I2C_AMD756 && EXPERIMENTAL
help
Enabling this option will add specific SMBus support for the Tyan
S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
over 8 different channels, where the various memory module EEPROMs
and temperature sensors live. Saying yes here will give you access
to these in addition to the trunk.
This driver can also be built as a module. If so, the module
will be called i2c-amd756-s4882.
config I2C_AMD8111
tristate "AMD 8111"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
This driver can also be built as a module. If so, the module
will be called i2c-amd8111.
config I2C_AU1550
tristate "Au1550 SMBus interface"
depends on I2C && SOC_AU1550
help
If you say yes to this option, support will be included for the
Au1550 SMBus interface.
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
config I2C_ELEKTOR
tristate "Elektor ISA card"
depends on I2C && ISA && BROKEN_ON_SMP
select I2C_ALGOPCF
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
such an adapter.
This support is also available as a module. If so, the module
will be called i2c-elektor.
config I2C_HYDRA
tristate "CHRP Apple Hydra Mac I/O I2C interface"
depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
select I2C_ALGOBIT
help
This supports the use of the I2C interface in the Apple Hydra Mac
I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
have such a machine.
This support is also available as a module. If so, the module
will be called i2c-hydra.
config I2C_I801
tristate "Intel 82801 (ICH)"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
versions of the chipset are supported:
82801AA
82801AB
82801BA
82801CA/CAM
82801DB
82801EB/ER (ICH5/ICH5R)
6300ESB
ICH6
ICH7
[PATCH] i2c-i801: I2C patch for Intel ESB2 This patch adds the Intel ESB2 DID's to the i2c-i801.c and Kconfig files for I2C support. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:45 +08:00
ESB2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called i2c-i801.
config I2C_I810
tristate "Intel 810/815"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the Intel
810/815 family of mainboard I2C interfaces. Specifically, the
following versions of the chipset is supported:
i810AA
i810AB
i810E
i815
This driver can also be built as a module. If so, the module
will be called i2c-i810.
[PATCH] I2C: Add PXA I2C driver Add support for the I2C PXA driver. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-06-15 19:38:14 +08:00
config I2C_PXA
tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
depends on I2C && EXPERIMENTAL && ARCH_PXA
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
will be called i2c-pxa.
config I2C_PXA_SLAVE
bool "Intel PXA2XX I2C Slave comms support"
depends on I2C_PXA
help
Support I2C slave mode communications on the PXA I2C bus. This
is necessary for systems where the PXA may be a target on the
I2C bus.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config I2C_PIIX4
tristate "Intel PIIX4"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following
versions of the chipset are supported:
Intel PIIX4
Intel 440MX
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
SMSC Victory66
This driver can also be built as a module. If so, the module
will be called i2c-piix4.
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
depends on IBM_OCP && I2C
help
Say Y here if you want to use IIC peripheral found on
embedded IBM PPC 4xx based systems.
This driver can also be built as a module. If so, the module
will be called i2c-ibm_iic.
config I2C_IOP3XX
tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
help
Say Y here if you want to use the IIC bus controller on
the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
config I2C_ISA
[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (4/9) All ISA hardware monitoring drivers (including hybrid drivers) now have a hard dependency on i2c-isa, so they must select I2C_ISA. As a result, CONFIG_I2C_ISA doesn't need to be left visible to the user. The good thing here is that users will stop complaining that some driver doesn't work just because they forgot to compile or load i2c-isa. At this point, all drivers are working again and the cleanup phase can begin. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-20 05:53:07 +08:00
tristate
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config I2C_ITE
tristate "ITE I2C Adapter"
depends on I2C && MIPS_ITE8172
select I2C_ALGOITE
help
This supports the ITE8172 I2C peripheral found on some MIPS
systems. Say Y if you have one of these. You should also say Y for
the ITE I2C driver algorithm support above.
This support is also available as a module. If so, the module
will be called i2c-ite.
config I2C_IXP4XX
tristate "IXP4xx GPIO-Based I2C Interface"
depends on I2C && ARCH_IXP4XX
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP4xx(420,421,422,425) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
will be called i2c-ixp4xx.
config I2C_IXP2000
tristate "IXP2000 GPIO-Based I2C Interface"
depends on I2C && ARCH_IXP2000
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
config I2C_KEYWEST
tristate "Powermac Keywest I2C interface"
depends on I2C && PPC_PMAC
help
This supports the use of the I2C interface in the combo-I/O
chip on recent Apple machines. Say Y if you have such a machine.
This support is also available as a module. If so, the module
will be called i2c-keywest.
config I2C_MPC
tristate "MPC107/824x/85xx/52xx"
[PATCH] broken dependency for I2C_MPC All boards dealt with by I2C_MPC are 32bit. Moreover, driver simply won't build on ppc64 - it uses ppc32-only types all over the place. Dependency fixed - it's PPC32, not PPC. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25 03:28:35 +08:00
depends on I2C && PPC32
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
MPC85xx family processors. The driver may also work on 52xx
family processors, though interrupts are known not to work.
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
config I2C_NFORCE2
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
tristate "Nvidia nForce2, nForce3 and nForce4"
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the Nvidia
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
config I2C_PARPORT
tristate "Parallel port adapter"
depends on I2C && PARPORT
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
Basically any adapter using the parallel port as an I2C bus with
no extra chipset is supported by this driver, or could be.
This driver is a replacement for (and was inspired by) an older
driver named i2c-philips-par. The new driver supports more devices,
and makes it easier to add support for new devices.
Another driver exists, named i2c-parport-light, which doesn't depend
on the parport driver. This is meant for embedded systems. Don't say
Y here if you intend to say Y or M there.
This support is also available as a module. If so, the module
will be called i2c-parport.
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
depends on I2C
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
Basically any adapter using the parallel port as an I2C bus with
no extra chipset is supported by this driver, or could be.
This driver is a light version of i2c-parport. It doesn't depend
on the parport driver, and uses direct I/O access instead. This
might be prefered on embedded systems where wasting memory for
the clean but heavy parport handling is not an option. The
drawback is a reduced portability and the impossibility to
dasiy-chain other parallel port devices.
Don't say Y here if you said Y or M to i2c-parport. Saying M to
both is possible but both modules should not be loaded at the same
time.
This support is also available as a module. If so, the module
will be called i2c-parport-light.
config I2C_PROSAVAGE
tristate "S3/VIA (Pro)Savage"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
graphics processors.
chipsets supported:
S3/VIA KM266/VT8375 aka ProSavage8
S3/VIA KM133/VT8365 aka Savage4
This support is also available as a module. If so, the module
will be called i2c-prosavage.
config I2C_RPXLITE
tristate "Embedded Planet RPX Lite/Classic support"
depends on (RPXLITE || RPXCLASSIC) && I2C
select I2C_ALGO8XX
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
depends on I2C && ARCH_S3C2410
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
config I2C_SAVAGE4
tristate "S3 Savage 4"
depends on I2C && PCI && EXPERIMENTAL
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
S3 Savage 4 I2C interface.
This driver can also be built as a module. If so, the module
will be called i2c-savage4.
config I2C_SIBYTE
tristate "SiByte SMBus interface"
depends on SIBYTE_SB1xxx_SOC && I2C
help
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
config SCx200_I2C
tristate "NatSemi SCx200 I2C using GPIO pins"
depends on SCx200_GPIO && I2C
select I2C_ALGOBIT
help
Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
If you don't know what to do here, say N.
This support is also available as a module. If so, the module
will be called scx200_i2c.
config SCx200_I2C_SCL
int "GPIO pin used for SCL"
depends on SCx200_I2C
default "12"
help
Enter the GPIO pin number used for the SCL signal. This value can
also be specified with a module parameter.
config SCx200_I2C_SDA
int "GPIO pin used for SDA"
depends on SCx200_I2C
default "13"
help
Enter the GPIO pin number used for the SSA signal. This value can
also be specified with a module parameter.
config SCx200_ACB
tristate "NatSemi SCx200 ACCESS.bus"
depends on I2C && PCI
help
Enable the use of the ACCESS.bus controllers of a SCx200 processor.
If you don't know what to do here, say N.
This support is also available as a module. If so, the module
will be called scx200_acb.
config I2C_SIS5595
tristate "SiS 5595"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
This driver can also be built as a module. If so, the module
will be called i2c-sis5595.
config I2C_SIS630
tristate "SiS 630/730"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the
SiS630 and SiS730 SMBus (a subset of I2C) interface.
This driver can also be built as a module. If so, the module
will be called i2c-sis630.
config I2C_SIS96X
tristate "SiS 96x"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the SiS
96x SMBus (a subset of I2C) interfaces. Specifically, the following
chipsets are supported:
645/961
645DX/961
645DX/962
648/961
650/961
735
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
745
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called i2c-sis96x.
config I2C_STUB
tristate "I2C/SMBus Test Stub"
depends on I2C && EXPERIMENTAL && 'm'
default 'n'
help
This module may be useful to developers of SMBus client drivers,
especially for certain kinds of sensor chips.
If you do build this module, be sure to read the notes and warnings
in <file:Documentation/i2c/i2c-stub>.
If you don't know what to do here, definitely say N.
config I2C_VIA
tristate "VIA 82C586B"
depends on I2C && PCI && EXPERIMENTAL
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the VIA
82C586B I2C interface
This driver can also be built as a module. If so, the module
will be called i2c-via.
config I2C_VIAPRO
tristate "VIA 82C596/82C686/823x"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say yes to this option, support will be included for the VIA
82C596/82C686/823x I2C interfaces. Specifically, the following
chipsets are supported:
82C596A/B
82C686A/B
8231
8233
8233A
8235
8237
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
config I2C_VOODOO3
tristate "Voodoo 3"
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-28 19:26:24 +08:00
depends on I2C && PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
Voodoo 3 I2C interface.
This driver can also be built as a module. If so, the module
will be called i2c-voodoo3.
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
depends on I2C
select I2C_ALGOPCA
help
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
depends on I2C && MV64X60 && EXPERIMENTAL
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
endmenu
Reference in New Issue Copy Permalink