luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5be5945864
tmp_suning_uos_patched/sound/pci/hda/hda_jack.h

187 lines
5.4 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 46 Based on 1 normalized pattern(s): this driver is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.461662648@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 01:08:11 +08:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
/*
* Jack-detection handling for HD-audio
*
* Copyright (c) 2011 Takashi Iwai <tiwai@suse.de>
*/
#ifndef __SOUND_HDA_JACK_H
#define __SOUND_HDA_JACK_H
ALSA: hda - add explicit include of err.h Since every caller of snd_hda_jack_detect_enable_callback needs to use the macros from err.h, it makes sense to include it directly from hda_jack.h. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-23 15:04:49 +08:00
#include <linux/err.h>
ALSA: hda - Add jack button support Extend some structs to add the support for jack button changes. Now snd_hda_jack_add_kctl() receives two more arguments: the jack type and the jack keymaps. Both are optional, and when zero are passed, the function behaves just like before. For reporting button state changes, you'd need to update jack->button_state bits accordingly, typically in the jack callback. Then the value OR'ed with button_state and the jack plug state is passed to snd_jack_report(). Note that currently the code assumes only the one-shot button events, i.e. it tries to send the button release soon after sending the button event. If a driver really supports the button release handling by itself, we may need to introduce some flag to control this behavior in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 21:25:37 +08:00
#include <sound/jack.h>
ALSA: hda - add explicit include of err.h Since every caller of snd_hda_jack_detect_enable_callback needs to use the macros from err.h, it makes sense to include it directly from hda_jack.h. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-23 15:04:49 +08:00
ALSA: hda - Move BIOS pin-parser code to hda_auto_parser.c Just code shuffles. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 23:42:31 +08:00
struct auto_pin_cfg;
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 17:30:59 +08:00
struct hda_jack_tbl;
ALSA: hda - Allow multiple callbacks for jack So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 21:22:46 +08:00
struct hda_jack_callback;
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 17:30:59 +08:00
ALSA: hda - Allow multiple callbacks for jack So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 21:22:46 +08:00
typedef void (*hda_jack_callback_fn) (struct hda_codec *, struct hda_jack_callback *);
struct hda_jack_callback {
ALSA: hda - Fix bad dereference of jack object The hda_jack_tbl entries are managed by snd_array for allowing multiple jacks. It's good per se, but the problem is that struct hda_jack_callback keeps the hda_jack_tbl pointer. Since snd_array doesn't preserve each pointer at resizing the array, we can't keep the original pointer but have to deduce the pointer at each time via snd_array_entry() instead. Actually, this resulted in the deference to the wrong pointer on codecs that have many pins such as CS4208. This patch replaces the pointer to the NID value as the search key. As an unexpected good side effect, this even simplifies the code, as only NID is needed in most cases. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 17:23:52 +08:00
hda_nid_t nid;
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
int dev_id;
ALSA: hda - Allow multiple callbacks for jack So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 21:22:46 +08:00
hda_jack_callback_fn func;
unsigned int private_data; /* arbitrary data */
ALSA: hda - Add jack pointer and unsolicited event bits to callback For allowing the callee to evaluate the associated jack information and the unsolicited event data, add the new fields to hda_jack_callback. They can be used, for example, to retrieve the headset button state in the callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 21:17:58 +08:00
unsigned int unsol_res; /* unsolicited event bits */
struct hda_jack_tbl *jack; /* associated jack entry */
ALSA: hda - Allow multiple callbacks for jack So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 21:22:46 +08:00
struct hda_jack_callback *next;
};
ALSA: hda - Move BIOS pin-parser code to hda_auto_parser.c Just code shuffles. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 23:42:31 +08:00
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
struct hda_jack_tbl {
hda_nid_t nid;
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
int dev_id;
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 07:16:55 +08:00
unsigned char tag; /* unsol event tag */
ALSA: hda - Allow multiple callbacks for jack So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 21:22:46 +08:00
struct hda_jack_callback *callback;
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 07:16:55 +08:00
/* jack-detection stuff */
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
unsigned int pin_sense; /* cached pin-sense value */
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 07:16:55 +08:00
unsigned int jack_detect:1; /* capable of jack-detection? */
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
unsigned int jack_dirty:1; /* needs to update? */
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 15:33:51 +08:00
unsigned int phantom_jack:1; /* a fixed, always present port? */
ALSA: hda - Add a block_report flag to jacks If the jack should not be reported to userspace (e g, because it is in some transitional state), one can set this flag. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-07 20:38:24 +08:00
unsigned int block_report:1; /* in a transitional state - do not report to userspace */
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-20 02:48:07 +08:00
hda_nid_t gating_jack; /* valid when gating jack plugged */
hda_nid_t gated_jack; /* gated is dependent on this jack */
ALSA: hda - Merge input-jack helpers to hda_jack.c We can use the very same table in hda_jack.c for managing the list for input-jack elements, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 15:54:51 +08:00
int type;
ALSA: hda - Add jack button support Extend some structs to add the support for jack button changes. Now snd_hda_jack_add_kctl() receives two more arguments: the jack type and the jack keymaps. Both are optional, and when zero are passed, the function behaves just like before. For reporting button state changes, you'd need to update jack->button_state bits accordingly, typically in the jack callback. Then the value OR'ed with button_state and the jack plug state is passed to snd_jack_report(). Note that currently the code assumes only the one-shot button events, i.e. it tries to send the button release soon after sending the button event. If a driver really supports the button release handling by itself, we may need to introduce some flag to control this behavior in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 21:25:37 +08:00
int button_state;
ALSA: hda - Merge input-jack helpers to hda_jack.c We can use the very same table in hda_jack.c for managing the list for input-jack elements, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 15:54:51 +08:00
struct snd_jack *jack;
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
};
ALSA: hda - Add jack button support Extend some structs to add the support for jack button changes. Now snd_hda_jack_add_kctl() receives two more arguments: the jack type and the jack keymaps. Both are optional, and when zero are passed, the function behaves just like before. For reporting button state changes, you'd need to update jack->button_state bits accordingly, typically in the jack callback. Then the value OR'ed with button_state and the jack plug state is passed to snd_jack_report(). Note that currently the code assumes only the one-shot button events, i.e. it tries to send the button release soon after sending the button event. If a driver really supports the button release handling by itself, we may need to introduce some flag to control this behavior in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 21:25:37 +08:00
struct hda_jack_keymap {
enum snd_jack_types type;
int key;
};
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
struct hda_jack_tbl *
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
snd_hda_jack_tbl_get_mst(struct hda_codec *codec, hda_nid_t nid, int dev_id);
/**
* snd_hda_jack_tbl_get - query the jack-table entry for the given NID
* @codec: the HDA codec
* @nid: pin NID to refer to
*/
static inline struct hda_jack_tbl *
snd_hda_jack_tbl_get(struct hda_codec *codec, hda_nid_t nid)
{
return snd_hda_jack_tbl_get_mst(codec, nid, 0);
}
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 07:16:55 +08:00
struct hda_jack_tbl *
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
snd_hda_jack_tbl_get_from_tag(struct hda_codec *codec,
unsigned char tag, int dev_id);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
void snd_hda_jack_tbl_clear(struct hda_codec *codec);
void snd_hda_jack_set_dirty_all(struct hda_codec *codec);
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
int snd_hda_jack_detect_enable(struct hda_codec *codec, hda_nid_t nid,
int dev_id);
ALSA: hda - Allow multiple callbacks for jack So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 21:22:46 +08:00
struct hda_jack_callback *
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
snd_hda_jack_detect_enable_callback_mst(struct hda_codec *codec, hda_nid_t nid,
int dev_id, hda_jack_callback_fn cb);
/**
* snd_hda_jack_detect_enable - enable the jack-detection
* @codec: the HDA codec
* @nid: pin NID to enable
* @func: callback function to register
*
* In the case of error, the return value will be a pointer embedded with
* errno. Check and handle the return value appropriately with standard
* macros such as @IS_ERR() and @PTR_ERR().
*/
static inline struct hda_jack_callback *
ALSA: hda - Make snd_hda_jack_detect_enable_callback() returning the jack object STAC/IDT driver calls snd_hda_jack_tbl_get() again after calling snd_hda_jack_detect_enable_callback(). For simplifying this, let's make snd_hda_jack_detect_enable_callback() returning the pointer while handling the error with the standard IS_ERR() & co. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11 20:39:09 +08:00
snd_hda_jack_detect_enable_callback(struct hda_codec *codec, hda_nid_t nid,
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
hda_jack_callback_fn cb)
{
return snd_hda_jack_detect_enable_callback_mst(codec, nid, 0, cb);
}
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 17:30:59 +08:00
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-20 02:48:07 +08:00
int snd_hda_jack_set_gating_jack(struct hda_codec *codec, hda_nid_t gated_nid,
hda_nid_t gating_nid);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
u32 snd_hda_jack_pin_sense(struct hda_codec *codec, hda_nid_t nid, int dev_id);
ALSA: hda - Add snd_hda_jack_detect_state() helper function snd_hda_jack_detect() function returns a boolean value for a jack plugged in or not, but it also returns always true when the corresponding pin is phantom (i.e. fixed). This is OK in most cases, but it makes the generic parser misbehaving about the auto-mute or auto-mic switching, e.g. when one of headphone pins is a fixed. Namely, the driver decides whether to mute the speaker or not, just depending on the headphone plug state: if one of the headphone jacks is seen as active, then the speaker is muted. Thus this will result always in the muted speaker output. So, the problem is the function returns a boolean, after all, although we need to think of "phantom" jack. Now a new function, snd_hda_jack_detect_state() is introduced to return these tristates. The generic parser uses this function for checking the headphone or mic jack states. Meanwhile, the behavior of snd_hda_jack_detect() is kept as is, for keeping compatibility in other driver codes. Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19 22:59:46 +08:00
/* the jack state returned from snd_hda_jack_detect_state() */
enum {
HDA_JACK_NOT_PRESENT, HDA_JACK_PRESENT, HDA_JACK_PHANTOM,
};
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
int snd_hda_jack_detect_state_mst(struct hda_codec *codec, hda_nid_t nid,
int dev_id);
/**
* snd_hda_jack_detect_state - query pin Presence Detect status
* @codec: the CODEC to sense
* @nid: the pin NID to sense
*
* Query and return the pin's Presence Detect status, as either
* HDA_JACK_NOT_PRESENT, HDA_JACK_PRESENT or HDA_JACK_PHANTOM.
*/
static inline int
snd_hda_jack_detect_state(struct hda_codec *codec, hda_nid_t nid)
{
return snd_hda_jack_detect_state_mst(codec, nid, 0);
}
/**
* snd_hda_jack_detect_mst - Detect the jack
* @codec: the HDA codec
* @nid: pin NID to check jack detection
* @dev_id: pin device entry id
*/
static inline bool
snd_hda_jack_detect_mst(struct hda_codec *codec, hda_nid_t nid, int dev_id)
{
return snd_hda_jack_detect_state_mst(codec, nid, dev_id) !=
HDA_JACK_NOT_PRESENT;
}
ALSA: hda - Add snd_hda_jack_detect_state() helper function snd_hda_jack_detect() function returns a boolean value for a jack plugged in or not, but it also returns always true when the corresponding pin is phantom (i.e. fixed). This is OK in most cases, but it makes the generic parser misbehaving about the auto-mute or auto-mic switching, e.g. when one of headphone pins is a fixed. Namely, the driver decides whether to mute the speaker or not, just depending on the headphone plug state: if one of the headphone jacks is seen as active, then the speaker is muted. Thus this will result always in the muted speaker output. So, the problem is the function returns a boolean, after all, although we need to think of "phantom" jack. Now a new function, snd_hda_jack_detect_state() is introduced to return these tristates. The generic parser uses this function for checking the headphone or mic jack states. Meanwhile, the behavior of snd_hda_jack_detect() is kept as is, for keeping compatibility in other driver codes. Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19 22:59:46 +08:00
ALSA: hda - More kerneldoc comments Put more kerneldoc comments to the exported functions. Still the generic parser code and the HD-audio controller code aren't covered yet, though. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29 23:03:58 +08:00
/**
* snd_hda_jack_detect - Detect the jack
* @codec: the HDA codec
* @nid: pin NID to check jack detection
*/
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
static inline bool
snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
ALSA: hda - Add snd_hda_jack_detect_state() helper function snd_hda_jack_detect() function returns a boolean value for a jack plugged in or not, but it also returns always true when the corresponding pin is phantom (i.e. fixed). This is OK in most cases, but it makes the generic parser misbehaving about the auto-mute or auto-mic switching, e.g. when one of headphone pins is a fixed. Namely, the driver decides whether to mute the speaker or not, just depending on the headphone plug state: if one of the headphone jacks is seen as active, then the speaker is muted. Thus this will result always in the muted speaker output. So, the problem is the function returns a boolean, after all, although we need to think of "phantom" jack. Now a new function, snd_hda_jack_detect_state() is introduced to return these tristates. The generic parser uses this function for checking the headphone or mic jack states. Meanwhile, the behavior of snd_hda_jack_detect() is kept as is, for keeping compatibility in other driver codes. Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19 22:59:46 +08:00
{
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
return snd_hda_jack_detect_mst(codec, nid, 0);
ALSA: hda - Add snd_hda_jack_detect_state() helper function snd_hda_jack_detect() function returns a boolean value for a jack plugged in or not, but it also returns always true when the corresponding pin is phantom (i.e. fixed). This is OK in most cases, but it makes the generic parser misbehaving about the auto-mute or auto-mic switching, e.g. when one of headphone pins is a fixed. Namely, the driver decides whether to mute the speaker or not, just depending on the headphone plug state: if one of the headphone jacks is seen as active, then the speaker is muted. Thus this will result always in the muted speaker output. So, the problem is the function returns a boolean, after all, although we need to think of "phantom" jack. Now a new function, snd_hda_jack_detect_state() is introduced to return these tristates. The generic parser uses this function for checking the headphone or mic jack states. Meanwhile, the behavior of snd_hda_jack_detect() is kept as is, for keeping compatibility in other driver codes. Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19 22:59:46 +08:00
}
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
ALSA: hda - Make is_jack_detectable() as non-inlined It's a bit too big and used too often as an inline function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 18:41:42 +08:00
bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
ALSA: hda - Add DP-MST jack support This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-19 16:47:08 +08:00
int snd_hda_jack_add_kctl_mst(struct hda_codec *codec, hda_nid_t nid,
int dev_id, const char *name, bool phantom_jack,
int type, const struct hda_jack_keymap *keymap);
/**
* snd_hda_jack_add_kctl - Add a kctl for the given pin
* @codec: the HDA codec
* @nid: pin NID to assign
* @name: string name for the jack
* @phantom_jack: flag to deal as a phantom jack
* @type: jack type bits to be reported, 0 for guessing from pincfg
* @keymap: optional jack / key mapping
*
* This assigns a jack-detection kctl to the given pin. The kcontrol
* will have the given name and index.
*/
static inline int
snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
const char *name, bool phantom_jack,
int type, const struct hda_jack_keymap *keymap)
{
return snd_hda_jack_add_kctl_mst(codec, nid, 0,
name, phantom_jack, type, keymap);
}
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 06:03:22 +08:00
int snd_hda_jack_add_kctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg);
void snd_hda_jack_report_sync(struct hda_codec *codec);
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 17:30:59 +08:00
void snd_hda_jack_unsol_event(struct hda_codec *codec, unsigned int res);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 06:03:22 +08:00
ALSA: hda - Implement a poll loop for jacks as a module parameter Now that we have a generic unsol mechanism, we can implement a generic poll loop, which can be used for debugging, or if a codec's unsol mechanism is broken. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-09 21:04:21 +08:00
void snd_hda_jack_poll_all(struct hda_codec *codec);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 04:12:46 +08:00
#endif /* __SOUND_HDA_JACK_H */
Reference in New Issue Copy Permalink