luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6806bfe18f
tmp_suning_uos_patched/arch/arm/mm/proc-arm6_7.S

424 lines
11 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* linux/arch/arm/mm/proc-arm6,7.S
*
* Copyright (C) 1997-2000 Russell King
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
* hacked for non-paged-MM by Hyok S. Choi, 2003.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These are the low level assembler for performing cache and TLB
* functions on the ARM610 & ARM710.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
kbuild: arm - use generic asm-offsets.h support Delete obsoleted stuff from arch Makefile and rename constants.h to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-10 03:08:59 +08:00
#include <asm/asm-offsets.h>
[ARM] Don't include asm/elf.h in asm code asm code really wants asm/hwcap.h, so include that instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-08 02:15:31 +08:00
#include <asm/hwcap.h>
[ARM] nommu: Move hardware page table definitions to pgtable-hwdef.h Move the hardware PMD and PTE page table definitions from pgtable.h into pgtable-hwdef.h, and include pgtable-hwdef.h as necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-16 22:44:36 +08:00
#include <asm/pgtable-hwdef.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/pgtable.h>
#include <asm/ptrace.h>
[ARM] Convert set_pte_ext implementions to macros There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-07 00:19:08 +08:00
#include "proc-macros.S"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ENTRY(cpu_arm6_dcache_clean_area)
ENTRY(cpu_arm7_dcache_clean_area)
mov pc, lr
/*
* Function: arm6_7_data_abort ()
*
* Params : r2 = address of aborted instruction
* : sp = pointer to registers
*
* Purpose : obtain information about current aborted instruction
*
* Returns : r0 = address of abort
* : r1 = FSR
*/
ENTRY(cpu_arm7_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r0] @ read arm instruction
[ARM] 2875/1: Data Abort fixes Patch from Timothy Baldwin All data aborts are treated as read accesses. The existing code updates the wrong bit of r1, also the comments are wrong in that the sense of the L bit is inverted. Signed-off-by: Timothy E. Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04 17:13:48 +08:00
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
and r7, r8, #15 << 24
add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
nop
/* 0 */ b .data_unknown
/* 1 */ mov pc, lr @ swp
/* 2 */ b .data_unknown
/* 3 */ b .data_unknown
/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m]
/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm
/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm]
/* 8 */ b .data_arm_ldmstm @ ldm*a rn, <rlist>
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
/* d */ mov pc, lr @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
mov r0, r2
mov r1, r8
mov r2, sp
bl baddataabort
b ret_from_exception
ENTRY(cpu_arm6_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r2] @ read arm instruction
[ARM] 2875/1: Data Abort fixes Patch from Timothy Baldwin All data aborts are treated as read accesses. The existing code updates the wrong bit of r1, also the comments are wrong in that the sense of the L bit is inverted. Signed-off-by: Timothy E. Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04 17:13:48 +08:00
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
and r7, r8, #14 << 24
teq r7, #8 << 24 @ was it ldm/stm
movne pc, lr
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
moveq pc, lr @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
and r2, r8, r7, lsl #1
add r6, r6, r2, lsr #1
and r2, r8, r7, lsl #2
add r6, r6, r2, lsr #2
and r2, r8, r7, lsl #3
add r6, r6, r2, lsr #3
add r6, r6, r6, lsr #8
add r6, r6, r6, lsr #4
and r6, r6, #15 @ r6 = no. of registers to transfer.
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
mov pc, lr
.data_arm_apply_r6_and_rn:
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
mov pc, lr
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
moveq pc, lr @ no writeback -> no fixup
.data_arm_lateldrpostconst:
movs r2, r8, lsl #20 @ Get offset
moveq pc, lr @ zero -> no fixup
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r2, lsr #20 @ Undo increment
addeq r7, r7, r2, lsr #20 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
mov pc, lr
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
moveq pc, lr @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
mov r5, r8, lsr #7 @ get shift count
ands r5, r5, #31
and r7, r8, #0x70 @ get shift type
orreq r7, r7, #8 @ shift count = 0
add pc, pc, r7
nop
mov r6, r6, lsl r5 @ 0: LSL #!0
b .data_arm_apply_r6_and_rn
b .data_arm_apply_r6_and_rn @ 1: LSL #0
nop
b .data_unknown @ 2: MUL?
nop
b .data_unknown @ 3: MUL?
nop
mov r6, r6, lsr r5 @ 4: LSR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, lsr #32 @ 5: LSR #32
b .data_arm_apply_r6_and_rn
b .data_unknown @ 6: MUL?
nop
b .data_unknown @ 7: MUL?
nop
mov r6, r6, asr r5 @ 8: ASR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, asr #32 @ 9: ASR #32
b .data_arm_apply_r6_and_rn
b .data_unknown @ A: MUL?
nop
b .data_unknown @ B: MUL?
nop
mov r6, r6, ror r5 @ C: ROR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, rrx @ D: RRX
b .data_arm_apply_r6_and_rn
b .data_unknown @ E: MUL?
nop
b .data_unknown @ F: MUL?
/*
* Function: arm6_7_proc_init (void)
* : arm6_7_proc_fin (void)
*
* Notes : This processor does not require these
*/
ENTRY(cpu_arm6_proc_init)
ENTRY(cpu_arm7_proc_init)
mov pc, lr
ENTRY(cpu_arm6_proc_fin)
ENTRY(cpu_arm7_proc_fin)
mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, r0
mov r0, #0x31 @ ....S..DP...M
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mov pc, lr
ENTRY(cpu_arm6_do_idle)
ENTRY(cpu_arm7_do_idle)
mov pc, lr
/*
* Function: arm6_7_switch_mm(unsigned long pgd_phys)
* Params : pgd_phys Physical address of page table
* Purpose : Perform a task switch, saving the old processes state, and restoring
* the new.
*/
ENTRY(cpu_arm6_switch_mm)
ENTRY(cpu_arm7_switch_mm)
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#ifdef CONFIG_MMU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mov pc, lr
/*
[ARM] Unuse another Linux PTE bit L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13 22:34:43 +08:00
* Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Params : r0 = Address to set
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
[ARM] Convert set_pte_ext implementions to macros There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-07 00:19:08 +08:00
.align 5
[ARM] Unuse another Linux PTE bit L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13 22:34:43 +08:00
ENTRY(cpu_arm6_set_pte_ext)
ENTRY(cpu_arm7_set_pte_ext)
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#ifdef CONFIG_MMU
[ARM] Convert set_pte_ext implementions to macros There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-07 00:19:08 +08:00
armv3_set_pte_ext wc_disable=0
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#endif /* CONFIG_MMU */
[ARM] Convert set_pte_ext implementions to macros There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-07 00:19:08 +08:00
mov pc, lr
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Function: _arm6_7_reset
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#ifdef CONFIG_MMU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mcr p15, 0, r1, c5, c0, 0 @ flush TLB
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
__INIT
.type __arm6_setup, #function
__arm6_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#ifdef CONFIG_MMU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mov r0, #0x3d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0011 1101
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#else
mov r0, #0x3c @ . ..RS BLDP WCA.
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mov pc, lr
.size __arm6_setup, . - __arm6_setup
.type __arm7_setup, #function
__arm7_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#ifdef CONFIG_MMU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mcr p15, 0, r0, c3, c0 @ load domain access register
mov r0, #0x7d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0111 1101
[ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 21:10:01 +08:00
#else
mov r0, #0x7c @ . ..RS BLDP WCA.
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mov pc, lr
.size __arm7_setup, . - __arm7_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm6_processor_functions, #object
ENTRY(arm6_processor_functions)
.word cpu_arm6_data_abort
[ARM] fix 48d7927bdf071d05cf5d15b816cf06b0937cb84f The proc-*.S files have the _prefetch_abort pointer placed at the end of the processor structure but the cpu-multi32.h defines it in the second position. The patch also fixes the support for XSC3 and the MMU-less CPUs (740, 7tdmi, 940, 946 and 9tdmi). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-22 01:42:04 +08:00
.word pabort_noifar
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.word cpu_arm6_proc_init
.word cpu_arm6_proc_fin
.word cpu_arm6_reset
.word cpu_arm6_do_idle
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
[ARM] Unuse another Linux PTE bit L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13 22:34:43 +08:00
.word cpu_arm6_set_pte_ext
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.size arm6_processor_functions, . - arm6_processor_functions
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm7_processor_functions, #object
ENTRY(arm7_processor_functions)
.word cpu_arm7_data_abort
[ARM] fix 48d7927bdf071d05cf5d15b816cf06b0937cb84f The proc-*.S files have the _prefetch_abort pointer placed at the end of the processor structure but the cpu-multi32.h defines it in the second position. The patch also fixes the support for XSC3 and the MMU-less CPUs (740, 7tdmi, 940, 946 and 9tdmi). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-22 01:42:04 +08:00
.word pabort_noifar
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.word cpu_arm7_proc_init
.word cpu_arm7_proc_fin
.word cpu_arm7_reset
.word cpu_arm7_do_idle
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
[ARM] Unuse another Linux PTE bit L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13 22:34:43 +08:00
.word cpu_arm7_set_pte_ext
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name: .asciz "armv3"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name: .asciz "v3"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm6_name, #object
cpu_arm6_name: .asciz "ARM6"
.size cpu_arm6_name, . - cpu_arm6_name
.type cpu_arm610_name, #object
cpu_arm610_name:
.asciz "ARM610"
.size cpu_arm610_name, . - cpu_arm610_name
.type cpu_arm7_name, #object
cpu_arm7_name: .asciz "ARM7"
.size cpu_arm7_name, . - cpu_arm7_name
.type cpu_arm710_name, #object
cpu_arm710_name:
.asciz "ARM710"
.size cpu_arm710_name, . - cpu_arm710_name
.align
[ARM] 2926/1: .proc.info - postfix section with .init for `make buildcheck` Patch from Ben Dooks The `make buildcheck` is erroneously reporting that the .proc.info list is referencing items in the .init section as it is not itself postfixed with .init Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-20 23:35:03 +08:00
.section ".proc.info.init", #alloc, #execinstr
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.type __arm6_proc_info, #object
__arm6_proc_info:
.long 0x41560600
.long 0xfffffff0
.long 0x00000c1e
[ARM] Set bit 4 on section mappings correctly depending on CPU On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30 01:24:21 +08:00
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm6_name
.long arm6_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm6_proc_info, . - __arm6_proc_info
.type __arm610_proc_info, #object
__arm610_proc_info:
.long 0x41560610
.long 0xfffffff0
.long 0x00000c1e
[ARM] Set bit 4 on section mappings correctly depending on CPU On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30 01:24:21 +08:00
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm610_name
.long arm6_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm610_proc_info, . - __arm610_proc_info
.type __arm7_proc_info, #object
__arm7_proc_info:
.long 0x41007000
.long 0xffffff00
.long 0x00000c1e
[ARM] Set bit 4 on section mappings correctly depending on CPU On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30 01:24:21 +08:00
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm7_name
.long arm7_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm7_proc_info, . - __arm7_proc_info
.type __arm710_proc_info, #object
__arm710_proc_info:
.long 0x41007100
.long 0xfff8ff00
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
[ARM] Set bit 4 on section mappings correctly depending on CPU On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30 01:24:21 +08:00
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm710_name
.long arm7_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm710_proc_info, . - __arm710_proc_info
Reference in New Issue Copy Permalink