tmp_suning_uos_patched/drivers/watchdog/s3c2410_wdt.c

631 lines
14 KiB
C
Raw Normal View History

/* linux/drivers/char/watchdog/s3c2410_wdt.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 Watchdog Timer Support
*
* Based on, softdog.c by Alan Cox,
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
#include <mach/map.h>
#undef S3C_VA_WATCHDOG
#define S3C_VA_WATCHDOG (0)
#include <plat/regs-watchdog.h>
#define PFX "s3c2410-wdt: "
#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
static int nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
static int soft_noboot;
static int debug;
module_param(tmr_margin, int, 0);
module_param(tmr_atboot, int, 0);
module_param(nowayout, int, 0);
module_param(soft_noboot, int, 0);
module_param(debug, int, 0);
MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
MODULE_PARM_DESC(tmr_atboot,
"Watchdog is started at boot time if set to 1, default="
__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
"0 to reboot (default depends on ONLY_TESTING)");
MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
static unsigned long open_lock;
static struct device *wdt_dev; /* platform device attached to */
static struct resource *wdt_mem;
static struct resource *wdt_irq;
static struct clk *wdt_clock;
static void __iomem *wdt_base;
static unsigned int wdt_count;
static char expect_close;
static DEFINE_SPINLOCK(wdt_lock);
/* watchdog control routines */
#define DBG(msg...) do { \
if (debug) \
printk(KERN_INFO msg); \
} while (0)
/* functions */
static void s3c2410wdt_keepalive(void)
{
spin_lock(&wdt_lock);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
spin_unlock(&wdt_lock);
}
static void __s3c2410wdt_stop(void)
{
unsigned long wtcon;
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
writel(wtcon, wdt_base + S3C2410_WTCON);
}
static void s3c2410wdt_stop(void)
{
spin_lock(&wdt_lock);
__s3c2410wdt_stop();
spin_unlock(&wdt_lock);
}
static void s3c2410wdt_start(void)
{
unsigned long wtcon;
spin_lock(&wdt_lock);
__s3c2410wdt_stop();
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
if (soft_noboot) {
wtcon |= S3C2410_WTCON_INTEN;
wtcon &= ~S3C2410_WTCON_RSTEN;
} else {
wtcon &= ~S3C2410_WTCON_INTEN;
wtcon |= S3C2410_WTCON_RSTEN;
}
DBG("%s: wdt_count=0x%08x, wtcon=%08lx\n",
__func__, wdt_count, wtcon);
writel(wdt_count, wdt_base + S3C2410_WTDAT);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
spin_unlock(&wdt_lock);
}
static inline int s3c2410wdt_is_running(void)
{
return readl(wdt_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
}
static int s3c2410wdt_set_heartbeat(int timeout)
{
unsigned long freq = clk_get_rate(wdt_clock);
unsigned int count;
unsigned int divisor = 1;
unsigned long wtcon;
if (timeout < 1)
return -EINVAL;
freq /= 128;
count = timeout * freq;
DBG("%s: count=%d, timeout=%d, freq=%lu\n",
__func__, count, timeout, freq);
/* if the count is bigger than the watchdog register,
then work out what we need to do (and if) we can
actually make this value
*/
if (count >= 0x10000) {
for (divisor = 1; divisor <= 0x100; divisor++) {
if ((count / divisor) < 0x10000)
break;
}
if ((count / divisor) >= 0x10000) {
dev_err(wdt_dev, "timeout %d too big\n", timeout);
return -EINVAL;
}
}
tmr_margin = timeout;
DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
__func__, timeout, divisor, count, count/divisor);
count /= divisor;
wdt_count = count;
/* update the pre-scaler */
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);
writel(count, wdt_base + S3C2410_WTDAT);
writel(wtcon, wdt_base + S3C2410_WTCON);
return 0;
}
/*
* /dev/watchdog handling
*/
static int s3c2410wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &open_lock))
return -EBUSY;
if (nowayout)
__module_get(THIS_MODULE);
expect_close = 0;
/* start the timer */
s3c2410wdt_start();
return nonseekable_open(inode, file);
}
static int s3c2410wdt_release(struct inode *inode, struct file *file)
{
/*
* Shut off the timer.
* Lock it in if it's a module and we set nowayout
*/
if (expect_close == 42)
s3c2410wdt_stop();
else {
dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
s3c2410wdt_keepalive();
}
expect_close = 0;
clear_bit(0, &open_lock);
return 0;
}
static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
/*
* Refresh the timer.
*/
if (len) {
if (!nowayout) {
size_t i;
/* In case it was set long ago */
expect_close = 0;
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
expect_close = 42;
}
}
s3c2410wdt_keepalive();
}
return len;
}
#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
static const struct watchdog_info s3c2410_wdt_ident = {
.options = OPTIONS,
.firmware_version = 0,
.identity = "S3C2410 Watchdog",
};
static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_margin;
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &s3c2410_wdt_ident,
sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_KEEPALIVE:
s3c2410wdt_keepalive();
return 0;
case WDIOC_SETTIMEOUT:
if (get_user(new_margin, p))
return -EFAULT;
if (s3c2410wdt_set_heartbeat(new_margin))
return -EINVAL;
s3c2410wdt_keepalive();
return put_user(tmr_margin, p);
case WDIOC_GETTIMEOUT:
return put_user(tmr_margin, p);
default:
return -ENOTTY;
}
}
/* kernel interface */
static const struct file_operations s3c2410wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = s3c2410wdt_write,
.unlocked_ioctl = s3c2410wdt_ioctl,
.open = s3c2410wdt_open,
.release = s3c2410wdt_release,
};
static struct miscdevice s3c2410wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &s3c2410wdt_fops,
};
/* interrupt handler code */
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
{
dev_info(wdt_dev, "watchdog timer expired (irq)\n");
s3c2410wdt_keepalive();
return IRQ_HANDLED;
}
#ifdef CONFIG_CPU_FREQ
static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
int ret;
if (!s3c2410wdt_is_running())
goto done;
if (val == CPUFREQ_PRECHANGE) {
/* To ensure that over the change we don't cause the
* watchdog to trigger, we perform an keep-alive if
* the watchdog is running.
*/
s3c2410wdt_keepalive();
} else if (val == CPUFREQ_POSTCHANGE) {
s3c2410wdt_stop();
ret = s3c2410wdt_set_heartbeat(tmr_margin);
if (ret >= 0)
s3c2410wdt_start();
else
goto err;
}
done:
return 0;
err:
dev_err(wdt_dev, "cannot set new value for timeout %d\n", tmr_margin);
return ret;
}
static struct notifier_block s3c2410wdt_cpufreq_transition_nb = {
.notifier_call = s3c2410wdt_cpufreq_transition,
};
static inline int s3c2410wdt_cpufreq_register(void)
{
return cpufreq_register_notifier(&s3c2410wdt_cpufreq_transition_nb,
CPUFREQ_TRANSITION_NOTIFIER);
}
static inline void s3c2410wdt_cpufreq_deregister(void)
{
cpufreq_unregister_notifier(&s3c2410wdt_cpufreq_transition_nb,
CPUFREQ_TRANSITION_NOTIFIER);
}
#else
static inline int s3c2410wdt_cpufreq_register(void)
{
return 0;
}
static inline void s3c2410wdt_cpufreq_deregister(void)
{
}
#endif
/* device interface */
static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
{
struct resource *res;
struct device *dev;
unsigned int wtcon;
int started = 0;
int ret;
int size;
DBG("%s: probe=%p\n", __func__, pdev);
dev = &pdev->dev;
wdt_dev = &pdev->dev;
/* get the memory region for the watchdog timer */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(dev, "no memory resource specified\n");
return -ENOENT;
}
size = resource_size(res);
wdt_mem = request_mem_region(res->start, size, pdev->name);
if (wdt_mem == NULL) {
dev_err(dev, "failed to get memory region\n");
ret = -ENOENT;
goto err_req;
}
wdt_base = ioremap(res->start, size);
if (wdt_base == NULL) {
dev_err(dev, "failed to ioremap() region\n");
ret = -EINVAL;
goto err_req;
}
DBG("probe: mapped wdt_base=%p\n", wdt_base);
wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (wdt_irq == NULL) {
dev_err(dev, "no irq resource specified\n");
ret = -ENOENT;
goto err_map;
}
ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
if (ret != 0) {
dev_err(dev, "failed to install irq (%d)\n", ret);
goto err_map;
}
wdt_clock = clk_get(&pdev->dev, "watchdog");
if (IS_ERR(wdt_clock)) {
dev_err(dev, "failed to find watchdog clock source\n");
ret = PTR_ERR(wdt_clock);
goto err_irq;
}
clk_enable(wdt_clock);
if (s3c2410wdt_cpufreq_register() < 0) {
printk(KERN_ERR PFX "failed to register cpufreq\n");
goto err_clk;
}
/* see if we can actually set the requested timer margin, and if
* not, try the default value */
if (s3c2410wdt_set_heartbeat(tmr_margin)) {
started = s3c2410wdt_set_heartbeat(
CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
if (started == 0)
dev_info(dev,
"tmr_margin value out of range, default %d used\n",
CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
else
dev_info(dev, "default timer value is out of range, "
"cannot start\n");
}
ret = misc_register(&s3c2410wdt_miscdev);
if (ret) {
dev_err(dev, "cannot register miscdev on minor=%d (%d)\n",
WATCHDOG_MINOR, ret);
goto err_cpufreq;
}
if (tmr_atboot && started == 0) {
dev_info(dev, "starting watchdog timer\n");
s3c2410wdt_start();
} else if (!tmr_atboot) {
/* if we're not enabling the watchdog, then ensure it is
* disabled if it has been left running from the bootloader
* or other source */
s3c2410wdt_stop();
}
/* print out a statement of readiness */
wtcon = readl(wdt_base + S3C2410_WTCON);
dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
(wtcon & S3C2410_WTCON_ENABLE) ? "" : "in",
(wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
(wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
return 0;
err_cpufreq:
s3c2410wdt_cpufreq_deregister();
err_clk:
clk_disable(wdt_clock);
clk_put(wdt_clock);
err_irq:
free_irq(wdt_irq->start, pdev);
err_map:
iounmap(wdt_base);
err_req:
release_resource(wdt_mem);
kfree(wdt_mem);
return ret;
}
static int __devexit s3c2410wdt_remove(struct platform_device *dev)
{
s3c2410wdt_cpufreq_deregister();
release_resource(wdt_mem);
kfree(wdt_mem);
wdt_mem = NULL;
free_irq(wdt_irq->start, dev);
wdt_irq = NULL;
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
iounmap(wdt_base);
misc_deregister(&s3c2410wdt_miscdev);
return 0;
}
static void s3c2410wdt_shutdown(struct platform_device *dev)
{
s3c2410wdt_stop();
}
#ifdef CONFIG_PM
static unsigned long wtcon_save;
static unsigned long wtdat_save;
static int s3c2410wdt_suspend(struct platform_device *dev, pm_message_t state)
{
/* Save watchdog state, and turn it off. */
wtcon_save = readl(wdt_base + S3C2410_WTCON);
wtdat_save = readl(wdt_base + S3C2410_WTDAT);
/* Note that WTCNT doesn't need to be saved. */
s3c2410wdt_stop();
return 0;
}
static int s3c2410wdt_resume(struct platform_device *dev)
{
/* Restore watchdog state. */
writel(wtdat_save, wdt_base + S3C2410_WTDAT);
writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
writel(wtcon_save, wdt_base + S3C2410_WTCON);
printk(KERN_INFO PFX "watchdog %sabled\n",
(wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
return 0;
}
#else
#define s3c2410wdt_suspend NULL
#define s3c2410wdt_resume NULL
#endif /* CONFIG_PM */
static struct platform_driver s3c2410wdt_driver = {
.probe = s3c2410wdt_probe,
.remove = __devexit_p(s3c2410wdt_remove),
.shutdown = s3c2410wdt_shutdown,
.suspend = s3c2410wdt_suspend,
.resume = s3c2410wdt_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c2410-wdt",
},
};
static char banner[] __initdata =
KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
static int __init watchdog_init(void)
{
printk(banner);
return platform_driver_register(&s3c2410wdt_driver);
}
static void __exit watchdog_exit(void)
{
platform_driver_unregister(&s3c2410wdt_driver);
}
module_init(watchdog_init);
module_exit(watchdog_exit);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
"Dimitry Andric <dimitry.andric@tomtom.com>");
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS("platform:s3c2410-wdt");