luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

spi: qup: Get rid of using struct spi_qup_device

Browse Source 
Current code uses struct spi_qup_device to store spi->mode and spi->chip_select
settings. We can get these settings in spi_qup_transfer_one and spi_qup_set_cs
without using struct spi_qup_device. Refactor the code a bit to remove
spi_qup_setup(), spi_qup_cleanup(), and struct spi_qup_device.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Axel Lin 2014-02-24 23:07:36 +08:00 committed by Mark Brown
parent 83f091440d
commit 00cce74d08
1 changed files with 9 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

61
drivers/spi/spi-qup.c
View File

@ -123,11 +123,6 @@
#define SPI_DELAY_THRESHOLD 1
#define SPI_DELAY_RETRY 10
struct spi_qup_device {
int select;
u16 mode;
};
struct spi_qup {
void __iomem *base;
struct device *dev;
@ -338,14 +333,13 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
/* set clock freq ... bits per word */
static int spi_qup_io_config(struct spi_qup *controller,
struct spi_qup_device *chip,
struct spi_transfer *xfer)
static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 config, iomode, mode;
int ret, n_words, w_size;
if (chip->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
dev_err(controller->dev, "too big size for loopback %d > %d\n",
xfer->len, controller->in_fifo_sz);
return -EIO;
@ -399,12 +393,12 @@ static int spi_qup_io_config(struct spi_qup *controller,
config = readl_relaxed(controller->base + SPI_CONFIG);
if (chip->mode & SPI_LOOP)
if (spi->mode & SPI_LOOP)
config |= SPI_CONFIG_LOOPBACK;
else
config &= ~SPI_CONFIG_LOOPBACK;
if (chip->mode & SPI_CPHA)
if (spi->mode & SPI_CPHA)
config &= ~SPI_CONFIG_INPUT_FIRST;
else
config |= SPI_CONFIG_INPUT_FIRST;
@ -413,7 +407,7 @@ static int spi_qup_io_config(struct spi_qup *controller,
* HS_MODE improves signal stability for spi-clk high rates,
* but is invalid in loop back mode.
*/
if ((xfer->speed_hz >= SPI_HS_MIN_RATE) && !(chip->mode & SPI_LOOP))
if ((xfer->speed_hz >= SPI_HS_MIN_RATE) && !(spi->mode & SPI_LOOP))
config |= SPI_CONFIG_HS_MODE;
else
config &= ~SPI_CONFIG_HS_MODE;
@ -433,7 +427,6 @@ static int spi_qup_io_config(struct spi_qup *controller,
static void spi_qup_set_cs(struct spi_device *spi, bool enable)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
struct spi_qup_device *chip = spi_get_ctldata(spi);
u32 iocontol, mask;
@ -444,9 +437,9 @@ static void spi_qup_set_cs(struct spi_device *spi, bool enable)
iocontol |= SPI_IO_C_FORCE_CS;
iocontol &= ~SPI_IO_C_CS_SELECT_MASK;
iocontol |= SPI_IO_C_CS_SELECT(chip->select);
iocontol |= SPI_IO_C_CS_SELECT(spi->chip_select);
mask = SPI_IO_C_CS_N_POLARITY_0 << chip->select;
mask = SPI_IO_C_CS_N_POLARITY_0 << spi->chip_select;
if (enable)
iocontol |= mask;
@ -461,11 +454,10 @@ static int spi_qup_transfer_one(struct spi_master *master,
struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(master);
struct spi_qup_device *chip = spi_get_ctldata(spi);
unsigned long timeout, flags;
int ret = -EIO;
ret = spi_qup_io_config(controller, chip, xfer);
ret = spi_qup_io_config(spi, xfer);
if (ret)
return ret;
@ -511,38 +503,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
return ret;
}
static int spi_qup_setup(struct spi_device *spi)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
struct spi_qup_device *chip = spi_get_ctldata(spi);
if (!chip) {
/* First setup */
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (!chip) {
dev_err(controller->dev, "no memory for chip data\n");
return -ENOMEM;
}
chip->mode = spi->mode;
chip->select = spi->chip_select;
spi_set_ctldata(spi, chip);
}
return 0;
}
static void spi_qup_cleanup(struct spi_device *spi)
{
struct spi_qup_device *chip = spi_get_ctldata(spi);
if (!chip)
return;
spi_set_ctldata(spi, NULL);
kfree(chip);
}
static int spi_qup_probe(struct platform_device *pdev)
{
struct spi_master *master;
@ -561,7 +521,6 @@ static int spi_qup_probe(struct platform_device *pdev)
return PTR_ERR(base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
@ -617,8 +576,6 @@ static int spi_qup_probe(struct platform_device *pdev)
master->num_chipselect = SPI_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->max_speed_hz = max_freq;
master->setup = spi_qup_setup;
master->cleanup = spi_qup_cleanup;
master->set_cs = spi_qup_set_cs;
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;