rtc: s5m: add support for S2MPS14 RTC
Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14 (in comparison to S5M8767): - Layout of registers - Lack of century support for time and alarms (7 registers used for storing time/alarm) - Two buffer control registers: WUDR and RUDR - No register for enabling writing time - RTC interrupts are reported in main PMIC I2C device Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
f8b23bbdad
commit
0c5deb1ea9
@ -530,11 +530,11 @@ config RTC_DRV_RV3029C2
|
||||
will be called rtc-rv3029c2.
|
||||
|
||||
config RTC_DRV_S5M
|
||||
tristate "Samsung S5M series"
|
||||
tristate "Samsung S2M/S5M series"
|
||||
depends on MFD_SEC_CORE
|
||||
help
|
||||
If you say yes here you will get support for the
|
||||
RTC of Samsung S5M PMIC series.
|
||||
RTC of Samsung S2MPS14 and S5M PMIC series.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-s5m.
|
||||
|
@ -17,16 +17,14 @@
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/bcd.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/rtc.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/samsung/core.h>
|
||||
#include <linux/mfd/samsung/irq.h>
|
||||
#include <linux/mfd/samsung/rtc.h>
|
||||
#include <linux/mfd/samsung/s2mps14.h>
|
||||
|
||||
/*
|
||||
* Maximum number of retries for checking changes in UDR field
|
||||
@ -74,6 +72,21 @@ static const struct s5m_rtc_reg_config s5m_rtc_regs = {
|
||||
.rtc_udr_mask = S5M_RTC_UDR_MASK,
|
||||
};
|
||||
|
||||
/*
|
||||
* Register map for S2MPS14.
|
||||
* It may be also suitable for S2MPS11 but this was not tested.
|
||||
*/
|
||||
static const struct s5m_rtc_reg_config s2mps_rtc_regs = {
|
||||
.regs_count = 7,
|
||||
.time = S2MPS_RTC_SEC,
|
||||
.ctrl = S2MPS_RTC_CTRL,
|
||||
.alarm0 = S2MPS_ALARM0_SEC,
|
||||
.alarm1 = S2MPS_ALARM1_SEC,
|
||||
.smpl_wtsr = S2MPS_WTSR_SMPL_CNTL,
|
||||
.rtc_udr_update = S2MPS_RTC_UDR_CON,
|
||||
.rtc_udr_mask = S2MPS_RTC_WUDR_MASK,
|
||||
};
|
||||
|
||||
struct s5m_rtc_info {
|
||||
struct device *dev;
|
||||
struct i2c_client *i2c;
|
||||
@ -178,6 +191,11 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
|
||||
ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
|
||||
val &= S5M_ALARM0_STATUS;
|
||||
break;
|
||||
case S2MPS14X:
|
||||
ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
|
||||
&val);
|
||||
val &= S2MPS_ALARM0_STATUS;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
@ -203,8 +221,9 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
|
||||
return ret;
|
||||
}
|
||||
|
||||
data |= S5M_RTC_TIME_EN_MASK;
|
||||
data |= info->regs->rtc_udr_mask;
|
||||
if (info->device_type == S5M8763X || info->device_type == S5M8767X)
|
||||
data |= S5M_RTC_TIME_EN_MASK;
|
||||
|
||||
ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
|
||||
if (ret < 0) {
|
||||
@ -229,8 +248,18 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
|
||||
return ret;
|
||||
}
|
||||
|
||||
data &= ~S5M_RTC_TIME_EN_MASK;
|
||||
data |= info->regs->rtc_udr_mask;
|
||||
switch (info->device_type) {
|
||||
case S5M8763X:
|
||||
case S5M8767X:
|
||||
data &= ~S5M_RTC_TIME_EN_MASK;
|
||||
break;
|
||||
case S2MPS14X:
|
||||
data |= S2MPS_RTC_RUDR_MASK;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
|
||||
if (ret < 0) {
|
||||
@ -282,6 +311,17 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
||||
u8 data[info->regs->regs_count];
|
||||
int ret;
|
||||
|
||||
if (info->device_type == S2MPS14X) {
|
||||
ret = regmap_update_bits(info->regmap,
|
||||
info->regs->rtc_udr_update,
|
||||
S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
|
||||
if (ret) {
|
||||
dev_err(dev,
|
||||
"Failed to prepare registers for time reading: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
ret = regmap_bulk_read(info->regmap, info->regs->time, data,
|
||||
info->regs->regs_count);
|
||||
if (ret < 0)
|
||||
@ -293,6 +333,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
||||
break;
|
||||
|
||||
case S5M8767X:
|
||||
case S2MPS14X:
|
||||
s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
|
||||
break;
|
||||
|
||||
@ -318,6 +359,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
||||
s5m8763_tm_to_data(tm, data);
|
||||
break;
|
||||
case S5M8767X:
|
||||
case S2MPS14X:
|
||||
ret = s5m8767_tm_to_data(tm, data);
|
||||
break;
|
||||
default:
|
||||
@ -364,6 +406,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
break;
|
||||
|
||||
case S5M8767X:
|
||||
case S2MPS14X:
|
||||
s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
|
||||
alrm->enabled = 0;
|
||||
for (i = 0; i < info->regs->regs_count; i++) {
|
||||
@ -411,6 +454,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
|
||||
break;
|
||||
|
||||
case S5M8767X:
|
||||
case S2MPS14X:
|
||||
for (i = 0; i < info->regs->regs_count; i++)
|
||||
data[i] &= ~ALARM_ENABLE_MASK;
|
||||
|
||||
@ -454,6 +498,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
|
||||
break;
|
||||
|
||||
case S5M8767X:
|
||||
case S2MPS14X:
|
||||
data[RTC_SEC] |= ALARM_ENABLE_MASK;
|
||||
data[RTC_MIN] |= ALARM_ENABLE_MASK;
|
||||
data[RTC_HOUR] |= ALARM_ENABLE_MASK;
|
||||
@ -492,6 +537,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
break;
|
||||
|
||||
case S5M8767X:
|
||||
case S2MPS14X:
|
||||
s5m8767_tm_to_data(&alrm->time, data);
|
||||
break;
|
||||
|
||||
@ -578,19 +624,33 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
|
||||
u8 data[2];
|
||||
int ret;
|
||||
|
||||
/* UDR update time. Default of 7.32 ms is too long. */
|
||||
ret = regmap_update_bits(info->regmap, S5M_RTC_UDR_CON,
|
||||
S5M_RTC_UDR_T_MASK, S5M_RTC_UDR_T_450_US);
|
||||
if (ret < 0)
|
||||
dev_err(info->dev, "%s: fail to change UDR time: %d\n",
|
||||
__func__, ret);
|
||||
switch (info->device_type) {
|
||||
case S5M8763X:
|
||||
case S5M8767X:
|
||||
/* UDR update time. Default of 7.32 ms is too long. */
|
||||
ret = regmap_update_bits(info->regmap, S5M_RTC_UDR_CON,
|
||||
S5M_RTC_UDR_T_MASK, S5M_RTC_UDR_T_450_US);
|
||||
if (ret < 0)
|
||||
dev_err(info->dev, "%s: fail to change UDR time: %d\n",
|
||||
__func__, ret);
|
||||
|
||||
/* Set RTC control register : Binary mode, 24hour mode */
|
||||
data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
|
||||
data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
|
||||
/* Set RTC control register : Binary mode, 24hour mode */
|
||||
data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
|
||||
data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
|
||||
|
||||
ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
|
||||
break;
|
||||
|
||||
case S2MPS14X:
|
||||
data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
|
||||
ret = regmap_write(info->regmap, info->regs->ctrl, data[0]);
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
info->rtc_24hr_mode = 1;
|
||||
ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
|
||||
if (ret < 0) {
|
||||
dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
|
||||
__func__, ret);
|
||||
@ -620,6 +680,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
|
||||
switch (pdata->device_type) {
|
||||
case S2MPS14X:
|
||||
regmap_cfg = &s2mps14_rtc_regmap_config;
|
||||
info->regs = &s2mps_rtc_regs;
|
||||
break;
|
||||
case S5M8763X:
|
||||
regmap_cfg = &s5m_rtc_regmap_config;
|
||||
@ -654,6 +715,11 @@ static int s5m_rtc_probe(struct platform_device *pdev)
|
||||
info->wtsr_smpl = s5m87xx->wtsr_smpl;
|
||||
|
||||
switch (pdata->device_type) {
|
||||
case S2MPS14X:
|
||||
info->irq = regmap_irq_get_virq(s5m87xx->irq_data,
|
||||
S2MPS14_IRQ_RTCA0);
|
||||
break;
|
||||
|
||||
case S5M8763X:
|
||||
info->irq = regmap_irq_get_virq(s5m87xx->irq_data,
|
||||
S5M8763_IRQ_ALARM0);
|
||||
@ -768,7 +834,8 @@ static int s5m_rtc_suspend(struct device *dev)
|
||||
static SIMPLE_DEV_PM_OPS(s5m_rtc_pm_ops, s5m_rtc_suspend, s5m_rtc_resume);
|
||||
|
||||
static const struct platform_device_id s5m_rtc_id[] = {
|
||||
{ "s5m-rtc", 0 },
|
||||
{ "s5m-rtc", S5M8767X },
|
||||
{ "s2mps14-rtc", S2MPS14X },
|
||||
};
|
||||
|
||||
static struct platform_driver s5m_rtc_driver = {
|
||||
@ -787,6 +854,6 @@ module_platform_driver(s5m_rtc_driver);
|
||||
|
||||
/* Module information */
|
||||
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
|
||||
MODULE_DESCRIPTION("Samsung S5M RTC driver");
|
||||
MODULE_DESCRIPTION("Samsung S5M/S2MPS14 RTC driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:s5m-rtc");
|
||||
|
Loading…
Reference in New Issue
Block a user