ARM: dts: Update Nanobone dts file

Update dts file to reflect:-
* new flash memory layout
* add missing phy-mode property
* dual_emac now just a boolean
* rename mcp to microchip
* update gpio definition

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Mark Jackson 2015-03-19 15:07:43 +00:00 committed by Tony Lindgren
parent 80a4158136
commit 10709c0858

View File

@ -213,7 +213,9 @@ &i2c0 {
pinctrl-0 = <&i2c0_pins>;
gpio@20 {
compatible = "mcp,mcp23017";
compatible = "microchip,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
};
@ -222,7 +224,7 @@ tps: tps@24 {
};
eeprom@53 {
compatible = "mcp,24c02";
compatible = "microchip,24c02";
reg = <0x53>;
pagesize = <8>;
};
@ -297,8 +299,8 @@ MTD partition table
| |-->0x004FFFFF-> Kernel end
| |-->0x00500000-> File system start
| |
| |-->0x014FFFFF-> File system end
| |-->0x01500000-> User data start
| |-->0x01FFFFFF-> File system end
| |-->0x02000000-> User data start
| |
| |-->0x03FFFFFF-> User data end
| |-->0x04000000-> Data storage start
@ -327,12 +329,12 @@ partition@3 {
partition@4 {
label = "rootfs";
reg = <0x00500000 0x01000000>; /* 16MB */
reg = <0x00500000 0x01b00000>; /* 27MB */
};
partition@5 {
label = "user";
reg = <0x01500000 0x02b00000>; /* 43MB */
reg = <0x02000000 0x02000000>; /* 32MB */
};
partition@6 {
@ -343,7 +345,7 @@ partition@6 {
};
&mac {
dual_emac = <1>;
dual_emac;
status = "okay";
};
@ -353,11 +355,13 @@ &davinci_mdio {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};