Documentation: treewide: fix typos and grammar
Correct spelling typo in treewide. Signed-off-by: Hayato Suzuki <hytszk@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Hayato Suzuki
Jiri Kosina
parent
a71db86e86
commit
24488c3920
@ -1,6 +1,6 @@
|
||||
Clock bindings for ARM Integrator Core Module clocks
|
||||
|
||||
Auxilary Oscillator Clock
|
||||
Auxiliary Oscillator Clock
|
||||
|
||||
This is a configurable clock fed from a 24 MHz chrystal,
|
||||
used for generating e.g. video clocks. It is located on the
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
|
||||
Currently Freescale powerpc chip C29X is embeded with SEC 6.
|
||||
Currently Freescale powerpc chip C29X is embedded with SEC 6.
|
||||
SEC 6 device tree binding include:
|
||||
-SEC 6 Node
|
||||
-Job Ring Node
|
||||
|
||||
@ -9,7 +9,7 @@ Required properties:
|
||||
- interrupts: Should contain the interrupt for the device
|
||||
- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
|
||||
- clock-names: Must contain "adc", matching entry in the clocks property.
|
||||
- vref-supply: The regulator supply ADC refrence voltage.
|
||||
- vref-supply: The regulator supply ADC reference voltage.
|
||||
|
||||
Example:
|
||||
adc0: adc@4003b000 {
|
||||
|
||||
@ -46,7 +46,7 @@ sub-node should be of the format as listed below.
|
||||
|
||||
regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
|
||||
|
||||
BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
|
||||
BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
|
||||
regulator-ramp-delay = <0> can be used for them to disable ramp delay.
|
||||
In the absence of the regulator-ramp-delay property, the default ramp
|
||||
delay will be used.
|
||||
|
||||
@ -110,8 +110,8 @@ on various other factors also like;
|
||||
Other factor which governs the selection of ecc-scheme is oob-size.
|
||||
Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
|
||||
so the device should have enough free bytes available its OOB/Spare
|
||||
area to accomodate ECC for entire page. In general following expression
|
||||
helps in determining if given device can accomodate ECC syndrome:
|
||||
area to accommodate ECC for entire page. In general following expression
|
||||
helps in determining if given device can accommodate ECC syndrome:
|
||||
"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
|
||||
where
|
||||
OOBSIZE number of bytes in OOB/spare area
|
||||
@ -133,5 +133,5 @@ on various other factors also like;
|
||||
Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
|
||||
trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
|
||||
Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
|
||||
which can be accomodate in the OOB/Spare area of this device
|
||||
which can be accommodated in the OOB/Spare area of this device
|
||||
(OOBSIZE=128). So this device can use BCH16 ecc-scheme.
|
||||
|
||||
@ -17,7 +17,7 @@ Required properties:
|
||||
- samsung,pbl: Integer, Programmable Burst Length.
|
||||
Supported values are 1, 2, 4, 8, 16, or 32.
|
||||
- samsung,burst-map: Integer, Program the possible bursts supported by sxgbe
|
||||
This is an interger and represents allowable DMA bursts when fixed burst.
|
||||
This is an integer and represents allowable DMA bursts when fixed burst.
|
||||
Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled.
|
||||
When fixed length is needed for burst mode, it can be set within allowable
|
||||
range.
|
||||
|
||||
@ -55,7 +55,7 @@ For CAM, this 24-bit offset is:
|
||||
cfg_offset(bus, device, function, register) =
|
||||
bus << 16 | device << 11 | function << 8 | register
|
||||
|
||||
Whilst ECAM extends this by 4 bits to accomodate 4k of function space:
|
||||
Whilst ECAM extends this by 4 bits to accommodate 4k of function space:
|
||||
|
||||
cfg_offset(bus, device, function, register) =
|
||||
bus << 20 | device << 15 | function << 12 | register
|
||||
|
||||
@ -27,7 +27,7 @@ phys: phy {
|
||||
};
|
||||
|
||||
That node describes an IP block (PHY provider) that implements 2 different PHYs.
|
||||
In order to differentiate between these 2 PHYs, an additonal specifier should be
|
||||
In order to differentiate between these 2 PHYs, an additional specifier should be
|
||||
given while trying to get a reference to it.
|
||||
|
||||
PHY user node
|
||||
|
||||
@ -24,7 +24,7 @@ Optional properties :
|
||||
- cm-thermal-zone : name of external thermometer's thermal zone
|
||||
- cm-battery-* : threshold battery temperature for charging
|
||||
-cold : critical cold temperature of battery for charging
|
||||
-cold-in-minus : flag that cold temerature is in minus degree
|
||||
-cold-in-minus : flag that cold temperature is in minus degrees
|
||||
-hot : critical hot temperature of battery for charging
|
||||
-temp-diff : temperature difference to allow recharging
|
||||
- cm-dis/charging-max = limits of charging duration
|
||||
|
||||
@ -33,7 +33,7 @@ Optional properties:
|
||||
0: Channel 1
|
||||
1: Channel 2
|
||||
2: Channel 3
|
||||
If parameter is missing, channel 1 is choosen.
|
||||
If parameter is missing, channel 1 is chosen.
|
||||
This properties have to be specified as '/bits/ 8' values.
|
||||
|
||||
- st,thermal-warning-recover:
|
||||
|
||||
@ -134,7 +134,7 @@ tlm Trusted Logic Mobility
|
||||
toradex Toradex AG
|
||||
toshiba Toshiba Corporation
|
||||
toumaz Toumaz
|
||||
usi Universal Scientifc Industrial Co., Ltd.
|
||||
usi Universal Scientific Industrial Co., Ltd.
|
||||
v3 V3 Semiconductor
|
||||
variscite Variscite Ltd.
|
||||
via VIA Technologies, Inc.
|
||||
|
||||
@ -39,8 +39,8 @@ Atmel LCDC Display
|
||||
-----------------------------------------------------
|
||||
Required properties (as per of_videomode_helper):
|
||||
|
||||
- atmel,dmacon: dma controler configuration
|
||||
- atmel,lcdcon2: lcd controler configuration
|
||||
- atmel,dmacon: dma controller configuration
|
||||
- atmel,lcdcon2: lcd controller configuration
|
||||
- atmel,guard-time: lcd guard time (Delay in frame periods)
|
||||
- bits-per-pixel: lcd panel bit-depth.
|
||||
|
||||
|
||||
@ -20,7 +20,7 @@ Optional properties:
|
||||
register is not modified as recommended by the datasheet.
|
||||
- fsl,lpccr: Contrast Control Register value. This property provides the
|
||||
default value for the contrast control register.
|
||||
If that property is ommited, the register is zeroed.
|
||||
If that property is omitted, the register is zeroed.
|
||||
- fsl,lscr1: LCDC Sharp Configuration Register value.
|
||||
|
||||
Example:
|
||||
|
||||
Loading…
Reference in New Issue
Block a user