mmc: sdhci-omap: Add custom set_uhs_signaling sdhci_host ops

UHS-1 DDR50 and MMC DDR52 mode require DDR bit to be
set in the configuration register (MMCHS_CON). Add
sdhci-omap specific set_uhs_signaling ops to set
this bit. Also while setting the UHSMS bit, clock should be
disabled.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Kishon Vijay Abraham I 2018-02-05 18:20:16 +05:30 committed by Ulf Hansson
parent 20ea26a1e3
commit 27ceb7e0b0

View File

@ -31,6 +31,7 @@
#define SDHCI_OMAP_CON 0x12c
#define CON_DW8 BIT(5)
#define CON_DMA_MASTER BIT(20)
#define CON_DDR BIT(19)
#define CON_CLKEXTFREE BIT(16)
#define CON_PADEN BIT(15)
#define CON_INIT BIT(1)
@ -461,6 +462,26 @@ static void sdhci_omap_init_74_clocks(struct sdhci_host *host, u8 power_mode)
enable_irq(host->irq);
}
static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
unsigned int timing)
{
u32 reg;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
sdhci_omap_stop_clock(omap_host);
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
if (timing == MMC_TIMING_UHS_DDR50 || timing == MMC_TIMING_MMC_DDR52)
reg |= CON_DDR;
else
reg &= ~CON_DDR;
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
sdhci_set_uhs_signaling(host, timing);
sdhci_omap_start_clock(omap_host);
}
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@ -470,7 +491,7 @@ static struct sdhci_ops sdhci_omap_ops = {
.set_bus_width = sdhci_omap_set_bus_width,
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
};
static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)