Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.25

This commit is contained in:
Paul Mackerras 2007-12-20 14:41:27 +11:00
commit 2c0b713f70
14 changed files with 170 additions and 75 deletions

View File

@ -61,7 +61,7 @@ static unsigned int spu_cycle_reset;
#define NUM_THREADS 2 /* number of physical threads in
* physical processor
*/
#define NUM_TRACE_BUS_WORDS 4
#define NUM_DEBUG_BUS_WORDS 4
#define NUM_INPUT_BUS_WORDS 2
#define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */
@ -169,7 +169,6 @@ static DEFINE_SPINLOCK(virt_cntr_lock);
static u32 ctr_enabled;
static unsigned char trace_bus[NUM_TRACE_BUS_WORDS];
static unsigned char input_bus[NUM_INPUT_BUS_WORDS];
/*
@ -298,7 +297,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
p->signal_group = event / 100;
p->bus_word = bus_word;
p->sub_unit = (unit_mask & 0x0000f000) >> 12;
p->sub_unit = GET_SUB_UNIT(unit_mask);
pm_regs.pm07_cntrl[ctr] = 0;
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
@ -334,16 +333,16 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
p->bit = signal_bit;
}
for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) {
for (i = 0; i < NUM_DEBUG_BUS_WORDS; i++) {
if (bus_word & (1 << i)) {
pm_regs.debug_bus_control |=
(bus_type << (31 - (2 * i) + 1));
(bus_type << (30 - (2 * i)));
for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) {
if (input_bus[j] == 0xff) {
input_bus[j] = i;
pm_regs.group_control |=
(i << (31 - i));
(i << (30 - (2 * j)));
break;
}
@ -450,6 +449,12 @@ static void cell_virtual_cntr(unsigned long data)
hdw_thread = 1 ^ hdw_thread;
next_hdw_thread = hdw_thread;
pm_regs.group_control = 0;
pm_regs.debug_bus_control = 0;
for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
input_bus[i] = 0xff;
/*
* There are some per thread events. Must do the
* set event, for the thread that is being started
@ -619,9 +624,6 @@ static int cell_reg_setup(struct op_counter_config *ctr,
pmc_cntrl[1][i].vcntr = i;
}
for (i = 0; i < NUM_TRACE_BUS_WORDS; i++)
trace_bus[i] = 0xff;
for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
input_bus[i] = 0xff;

View File

@ -21,8 +21,9 @@
*/
#include <linux/cpufreq.h>
#include <linux/of_platform.h>
#include <asm/machdep.h>
#include <asm/of_platform.h>
#include <asm/prom.h>
#include <asm/cell-regs.h>
#include "cbe_cpufreq.h"

View File

@ -23,7 +23,8 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <asm/of_platform.h>
#include <linux/of_platform.h>
#include <asm/processor.h>
#include <asm/prom.h>
#include <asm/pmi.h>

View File

@ -9,13 +9,13 @@
#include <linux/percpu.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/of_device.h>
#include <asm/of_platform.h>
#include <asm/cell-regs.h>
/*

View File

@ -26,13 +26,13 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/of_platform.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/udbg.h>
#include <asm/of_platform.h>
#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/cell-regs.h>

View File

@ -213,7 +213,7 @@ u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg)
break;
case pm_interval:
READ_SHADOW_REG(val, pm_interval);
READ_MMIO_UPPER32(val, pm_interval);
break;
case pm_start_stop:

View File

@ -30,6 +30,7 @@
#include <linux/console.h>
#include <linux/mutex.h>
#include <linux/memory_hotplug.h>
#include <linux/of_platform.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@ -51,7 +52,6 @@
#include <asm/spu_priv1.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/of_platform.h>
#include <asm/cell-regs.h>
#include "interrupt.h"

View File

@ -34,6 +34,7 @@
#include <linux/linux_logo.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/spu_csa.h>
#include <asm/xmon.h>
#include <asm/prom.h>
@ -46,6 +47,13 @@ EXPORT_SYMBOL_GPL(spu_priv1_ops);
struct cbe_spu_info cbe_spu_info[MAX_NUMNODES];
EXPORT_SYMBOL_GPL(cbe_spu_info);
/*
* The spufs fault-handling code needs to call force_sig_info to raise signals
* on DMA errors. Export it here to avoid general kernel-wide access to this
* function
*/
EXPORT_SYMBOL_GPL(force_sig_info);
/*
* Protects cbe_spu_info and spu->number.
*/
@ -66,6 +74,10 @@ static LIST_HEAD(spu_full_list);
static DEFINE_SPINLOCK(spu_full_list_lock);
static DEFINE_MUTEX(spu_full_list_mutex);
struct spu_slb {
u64 esid, vsid;
};
void spu_invalidate_slbs(struct spu *spu)
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
@ -114,6 +126,12 @@ void spu_associate_mm(struct spu *spu, struct mm_struct *mm)
}
EXPORT_SYMBOL_GPL(spu_associate_mm);
int spu_64k_pages_available(void)
{
return mmu_psize_defs[MMU_PAGE_64K].shift != 0;
}
EXPORT_SYMBOL_GPL(spu_64k_pages_available);
static int __spu_trap_invalid_dma(struct spu *spu)
{
pr_debug("%s\n", __FUNCTION__);
@ -143,11 +161,22 @@ static void spu_restart_dma(struct spu *spu)
out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
}
static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
__func__, slbe, slb->vsid, slb->esid);
out_be64(&priv2->slb_index_W, slbe);
out_be64(&priv2->slb_vsid_RW, slb->vsid);
out_be64(&priv2->slb_esid_RW, slb->esid);
}
static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
{
struct mm_struct *mm = spu->mm;
u64 esid, vsid, llp;
struct spu_slb slb;
int psize;
pr_debug("%s\n", __FUNCTION__);
@ -159,7 +188,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
printk("%s: invalid access during switch!\n", __func__);
return 1;
}
esid = (ea & ESID_MASK) | SLB_ESID_V;
slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
switch(REGION_ID(ea)) {
case USER_REGION_ID:
@ -168,21 +197,21 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
#else
psize = mm->context.user_psize;
#endif
vsid = (get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
SLB_VSID_USER;
slb.vsid = (get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M)
<< SLB_VSID_SHIFT) | SLB_VSID_USER;
break;
case VMALLOC_REGION_ID:
if (ea < VMALLOC_END)
psize = mmu_vmalloc_psize;
else
psize = mmu_io_psize;
vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
SLB_VSID_KERNEL;
slb.vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M)
<< SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
break;
case KERNEL_REGION_ID:
psize = mmu_linear_psize;
vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
SLB_VSID_KERNEL;
slb.vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M)
<< SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
break;
default:
/* Future: support kernel segments so that drivers
@ -191,11 +220,9 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
pr_debug("invalid region access at %016lx\n", ea);
return 1;
}
llp = mmu_psize_defs[psize].sllp;
slb.vsid |= mmu_psize_defs[psize].sllp;
out_be64(&priv2->slb_index_W, spu->slb_replace);
out_be64(&priv2->slb_vsid_RW, vsid | llp);
out_be64(&priv2->slb_esid_RW, esid);
spu_load_slb(spu, spu->slb_replace, &slb);
spu->slb_replace++;
if (spu->slb_replace >= 8)
@ -232,6 +259,74 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
return 0;
}
static void __spu_kernel_slb(void *addr, struct spu_slb *slb)
{
unsigned long ea = (unsigned long)addr;
u64 llp;
if (REGION_ID(ea) == KERNEL_REGION_ID)
llp = mmu_psize_defs[mmu_linear_psize].sllp;
else
llp = mmu_psize_defs[mmu_virtual_psize].sllp;
slb->vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
SLB_VSID_KERNEL | llp;
slb->esid = (ea & ESID_MASK) | SLB_ESID_V;
}
/**
* Given an array of @nr_slbs SLB entries, @slbs, return non-zero if the
* address @new_addr is present.
*/
static inline int __slb_present(struct spu_slb *slbs, int nr_slbs,
void *new_addr)
{
unsigned long ea = (unsigned long)new_addr;
int i;
for (i = 0; i < nr_slbs; i++)
if (!((slbs[i].esid ^ ea) & ESID_MASK))
return 1;
return 0;
}
/**
* Setup the SPU kernel SLBs, in preparation for a context save/restore. We
* need to map both the context save area, and the save/restore code.
*
* Because the lscsa and code may cross segment boundaires, we check to see
* if mappings are required for the start and end of each range. We currently
* assume that the mappings are smaller that one segment - if not, something
* is seriously wrong.
*/
void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
void *code, int code_size)
{
struct spu_slb slbs[4];
int i, nr_slbs = 0;
/* start and end addresses of both mappings */
void *addrs[] = {
lscsa, (void *)lscsa + sizeof(*lscsa) - 1,
code, code + code_size - 1
};
/* check the set of addresses, and create a new entry in the slbs array
* if there isn't already a SLB for that address */
for (i = 0; i < ARRAY_SIZE(addrs); i++) {
if (__slb_present(slbs, nr_slbs, addrs[i]))
continue;
__spu_kernel_slb(addrs[i], &slbs[nr_slbs]);
nr_slbs++;
}
/* Add the set of SLBs */
for (i = 0; i < nr_slbs; i++)
spu_load_slb(spu, i, &slbs[i]);
}
EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs);
static irqreturn_t
spu_irq_class_0(int irq, void *data)
{
@ -479,13 +574,27 @@ EXPORT_SYMBOL_GPL(spu_add_sysdev_attr);
int spu_add_sysdev_attr_group(struct attribute_group *attrs)
{
struct spu *spu;
int rc = 0;
mutex_lock(&spu_full_list_mutex);
list_for_each_entry(spu, &spu_full_list, full_list)
sysfs_create_group(&spu->sysdev.kobj, attrs);
list_for_each_entry(spu, &spu_full_list, full_list) {
rc = sysfs_create_group(&spu->sysdev.kobj, attrs);
/* we're in trouble here, but try unwinding anyway */
if (rc) {
printk(KERN_ERR "%s: can't create sysfs group '%s'\n",
__func__, attrs->name);
list_for_each_entry_continue_reverse(spu,
&spu_full_list, full_list)
sysfs_remove_group(&spu->sysdev.kobj, attrs);
break;
}
}
mutex_unlock(&spu_full_list_mutex);
return 0;
return rc;
}
EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group);

View File

@ -345,7 +345,7 @@ static int __init of_create_spu(struct spu *spu, void *data)
}
ret = spu_map_interrupts_old(spu, spe);
if (ret) {
printk(KERN_ERR "%s: could not map interrupts",
printk(KERN_ERR "%s: could not map interrupts\n",
spu->name);
goto out_unmap;
}
@ -411,10 +411,15 @@ static void init_affinity_qs20_harcoded(void)
static int of_has_vicinity(void)
{
struct spu* spu;
struct device_node *dn;
spu = list_first_entry(&cbe_spu_info[0].spus, struct spu, cbe_list);
return of_find_property(spu_devnode(spu), "vicinity", NULL) != NULL;
for_each_node_by_type(dn, "spe") {
if (of_find_property(dn, "vicinity", NULL)) {
of_node_put(dn);
return 1;
}
}
return 0;
}
static struct spu *devnode_spu(int cbe, struct device_node *dn)
@ -525,7 +530,7 @@ static int __init init_affinity(void)
if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
init_affinity_qs20_harcoded();
else
printk("No affinity configuration found");
printk("No affinity configuration found\n");
}
return 0;

View File

@ -73,7 +73,7 @@ int spu_alloc_lscsa(struct spu_state *csa)
int i, j, n_4k;
/* Check availability of 64K pages */
if (mmu_psize_defs[MMU_PAGE_64K].shift == 0)
if (!spu_64k_pages_available())
goto fail;
csa->use_big_pages = 1;

View File

@ -691,35 +691,9 @@ static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
}
static inline void get_kernel_slb(u64 ea, u64 slb[2])
static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu,
unsigned int *code, int code_size)
{
u64 llp;
if (REGION_ID(ea) == KERNEL_REGION_ID)
llp = mmu_psize_defs[mmu_linear_psize].sllp;
else
llp = mmu_psize_defs[mmu_virtual_psize].sllp;
slb[0] = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
SLB_VSID_KERNEL | llp;
slb[1] = (ea & ESID_MASK) | SLB_ESID_V;
}
static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe)
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
out_be64(&priv2->slb_index_W, slbe);
eieio();
out_be64(&priv2->slb_vsid_RW, slb[0]);
out_be64(&priv2->slb_esid_RW, slb[1]);
eieio();
}
static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
{
u64 code_slb[2];
u64 lscsa_slb[2];
/* Save, Step 47:
* Restore, Step 30.
* If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
@ -735,11 +709,7 @@ static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
* translation is desired by OS environment).
*/
spu_invalidate_slbs(spu);
get_kernel_slb((unsigned long)&spu_save_code[0], code_slb);
get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb);
load_mfc_slb(spu, code_slb, 0);
if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1]))
load_mfc_slb(spu, lscsa_slb, 1);
spu_setup_kernel_slbs(spu, csa->lscsa, code, code_size);
}
static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
@ -1866,7 +1836,8 @@ static void save_lscsa(struct spu_state *prev, struct spu *spu)
*/
resume_mfc_queue(prev, spu); /* Step 46. */
setup_mfc_slbs(prev, spu); /* Step 47. */
/* Step 47. */
setup_mfc_slbs(prev, spu, spu_save_code, sizeof(spu_save_code));
set_switch_active(prev, spu); /* Step 48. */
enable_interrupts(prev, spu); /* Step 49. */
save_ls_16kb(prev, spu); /* Step 50. */
@ -1971,7 +1942,8 @@ static void restore_lscsa(struct spu_state *next, struct spu *spu)
setup_spu_status_part1(next, spu); /* Step 27. */
setup_spu_status_part2(next, spu); /* Step 28. */
restore_mfc_rag(next, spu); /* Step 29. */
setup_mfc_slbs(next, spu); /* Step 30. */
/* Step 30. */
setup_mfc_slbs(next, spu, spu_restore_code, sizeof(spu_restore_code));
set_spu_npc(next, spu); /* Step 31. */
set_signot1(next, spu); /* Step 32. */
set_signot2(next, spu); /* Step 33. */

View File

@ -22,8 +22,8 @@
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/of_platform.h>
#include <asm/firmware.h>
#include "beat_wrapper.h"

View File

@ -40,6 +40,7 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/console.h>
#include <linux/of_platform.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@ -52,7 +53,6 @@
#include <asm/time.h>
#include <asm/spu_priv1.h>
#include <asm/firmware.h>
#include <asm/of_platform.h>
#include <asm/rtas.h>
#include <asm/cell-regs.h>

View File

@ -104,6 +104,7 @@
struct spu_context;
struct spu_runqueue;
struct spu_lscsa;
struct device_node;
enum spu_utilization_state {
@ -200,6 +201,9 @@ int spu_irq_class_0_bottom(struct spu *spu);
int spu_irq_class_1_bottom(struct spu *spu);
void spu_irq_setaffinity(struct spu *spu, int cpu);
void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
void *code, int code_size);
#ifdef CONFIG_KEXEC
void crash_register_spus(struct list_head *list);
#else
@ -210,6 +214,7 @@ static inline void crash_register_spus(struct list_head *list)
extern void spu_invalidate_slbs(struct spu *spu);
extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
int spu_64k_pages_available(void);
/* Calls from the memory management to the SPU */
struct mm_struct;