rtc: add stand-alone driver for RX8025 chip
Add support for the Epson RX-8025SA/NB RTC chips. It includes support for alarms, periodic interrupts (1 Hz) and clock precision adjustment. For clock precision adjustment, the SYSFS file "clock_adjust_ppb" gets created in "/sys/class/rtc/rtcX/device". It permits to set and get the clock adjustment in ppb (parts per billion), e.g.: # echo -183000 > /sys/class/rtc/rtc0/device/clock_adjust_ppb # cat /sys/class/rtc/rtc0/device/clock_adjust_ppb -183000 This allows to compensate temperature dependent clock drifts. According to the RX8025 SA/NB application manual the frequency and temperature characteristics can be approximated using the following equation: df = a * (ut - t)**2 df: Frequency deviation in any temperature a : Coefficient = (-35 +-5) * 10**-9 ut: Ultimate temperature in degree = +25 +-5 degree t : Any temperature in degree Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Wolfgang Grandegger
Linus Torvalds
parent
97f902b7be
commit
3c2b9075cb
|
|
@ -296,6 +296,15 @@ config RTC_DRV_RX8581
|
|||
This driver can also be built as a module. If so the module
|
||||
will be called rtc-rx8581.
|
||||
|
||||
config RTC_DRV_RX8025
|
||||
tristate "Epson RX-8025SA/NB"
|
||||
help
|
||||
If you say yes here you get support for the Epson
|
||||
RX-8025SA/NB RTC chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-rx8025.
|
||||
|
||||
endif # I2C
|
||||
|
||||
comment "SPI RTC drivers"
|
||||
|
|
|
|||
|
|
@ -62,6 +62,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
|
|||
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
|
||||
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
|
||||
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
|
||||
obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
|
||||
obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
|
||||
obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
|
||||
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
|
||||
|
|
|
|||
688
drivers/rtc/rtc-rx8025.c
Normal file
688
drivers/rtc/rtc-rx8025.c
Normal file
|
|
@ -0,0 +1,688 @@
|
|||
/*
|
||||
* Driver for Epson's RTC module RX-8025 SA/NB
|
||||
*
|
||||
* Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com>
|
||||
*
|
||||
* Copyright (C) 2005 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Modified by fengjh at rising.com.cn
|
||||
* <http://lists.lm-sensors.org/mailman/listinfo/lm-sensors>
|
||||
* 2006.11
|
||||
*
|
||||
* Code cleanup by Sergei Poselenov, <sposelenov@emcraft.com>
|
||||
* Converted to new style by Wolfgang Grandegger <wg@grandegger.com>
|
||||
* Alarm and periodic interrupt added by Dmitry Rakhchev <rda@emcraft.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/bcd.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/rtc.h>
|
||||
|
||||
/* Register definitions */
|
||||
#define RX8025_REG_SEC 0x00
|
||||
#define RX8025_REG_MIN 0x01
|
||||
#define RX8025_REG_HOUR 0x02
|
||||
#define RX8025_REG_WDAY 0x03
|
||||
#define RX8025_REG_MDAY 0x04
|
||||
#define RX8025_REG_MONTH 0x05
|
||||
#define RX8025_REG_YEAR 0x06
|
||||
#define RX8025_REG_DIGOFF 0x07
|
||||
#define RX8025_REG_ALWMIN 0x08
|
||||
#define RX8025_REG_ALWHOUR 0x09
|
||||
#define RX8025_REG_ALWWDAY 0x0a
|
||||
#define RX8025_REG_ALDMIN 0x0b
|
||||
#define RX8025_REG_ALDHOUR 0x0c
|
||||
/* 0x0d is reserved */
|
||||
#define RX8025_REG_CTRL1 0x0e
|
||||
#define RX8025_REG_CTRL2 0x0f
|
||||
|
||||
#define RX8025_BIT_CTRL1_CT (7 << 0)
|
||||
/* 1 Hz periodic level irq */
|
||||
#define RX8025_BIT_CTRL1_CT_1HZ 4
|
||||
#define RX8025_BIT_CTRL1_TEST (1 << 3)
|
||||
#define RX8025_BIT_CTRL1_1224 (1 << 5)
|
||||
#define RX8025_BIT_CTRL1_DALE (1 << 6)
|
||||
#define RX8025_BIT_CTRL1_WALE (1 << 7)
|
||||
|
||||
#define RX8025_BIT_CTRL2_DAFG (1 << 0)
|
||||
#define RX8025_BIT_CTRL2_WAFG (1 << 1)
|
||||
#define RX8025_BIT_CTRL2_CTFG (1 << 2)
|
||||
#define RX8025_BIT_CTRL2_PON (1 << 4)
|
||||
#define RX8025_BIT_CTRL2_XST (1 << 5)
|
||||
#define RX8025_BIT_CTRL2_VDET (1 << 6)
|
||||
|
||||
/* Clock precision adjustment */
|
||||
#define RX8025_ADJ_RESOLUTION 3050 /* in ppb */
|
||||
#define RX8025_ADJ_DATA_MAX 62
|
||||
#define RX8025_ADJ_DATA_MIN -62
|
||||
|
||||
static const struct i2c_device_id rx8025_id[] = {
|
||||
{ "rx8025", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, rx8025_id);
|
||||
|
||||
struct rx8025_data {
|
||||
struct i2c_client *client;
|
||||
struct rtc_device *rtc;
|
||||
struct work_struct work;
|
||||
u8 ctrl1;
|
||||
unsigned exiting:1;
|
||||
};
|
||||
|
||||
static int rx8025_read_reg(struct i2c_client *client, int number, u8 *value)
|
||||
{
|
||||
int ret = i2c_smbus_read_byte_data(client, (number << 4) | 0x08);
|
||||
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Unable to read register #%d\n", number);
|
||||
return ret;
|
||||
}
|
||||
|
||||
*value = ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rx8025_read_regs(struct i2c_client *client,
|
||||
int number, u8 length, u8 *values)
|
||||
{
|
||||
int ret = i2c_smbus_read_i2c_block_data(client, (number << 4) | 0x08,
|
||||
length, values);
|
||||
|
||||
if (ret != length) {
|
||||
dev_err(&client->dev, "Unable to read registers #%d..#%d\n",
|
||||
number, number + length - 1);
|
||||
return ret < 0 ? ret : -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rx8025_write_reg(struct i2c_client *client, int number, u8 value)
|
||||
{
|
||||
int ret = i2c_smbus_write_byte_data(client, number << 4, value);
|
||||
|
||||
if (ret)
|
||||
dev_err(&client->dev, "Unable to write register #%d\n",
|
||||
number);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rx8025_write_regs(struct i2c_client *client,
|
||||
int number, u8 length, u8 *values)
|
||||
{
|
||||
int ret = i2c_smbus_write_i2c_block_data(client, (number << 4) | 0x08,
|
||||
length, values);
|
||||
|
||||
if (ret)
|
||||
dev_err(&client->dev, "Unable to write registers #%d..#%d\n",
|
||||
number, number + length - 1);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static irqreturn_t rx8025_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct i2c_client *client = dev_id;
|
||||
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
||||
|
||||
disable_irq_nosync(irq);
|
||||
schedule_work(&rx8025->work);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void rx8025_work(struct work_struct *work)
|
||||
{
|
||||
struct rx8025_data *rx8025 = container_of(work, struct rx8025_data,
|
||||
work);
|
||||
struct i2c_client *client = rx8025->client;
|
||||
struct mutex *lock = &rx8025->rtc->ops_lock;
|
||||
u8 status;
|
||||
|
||||
mutex_lock(lock);
|
||||
|
||||
if (rx8025_read_reg(client, RX8025_REG_CTRL2, &status))
|
||||
goto out;
|
||||
|
||||
if (!(status & RX8025_BIT_CTRL2_XST))
|
||||
dev_warn(&client->dev, "Oscillation stop was detected,"
|
||||
"you may have to readjust the clock\n");
|
||||
|
||||
if (status & RX8025_BIT_CTRL2_CTFG) {
|
||||
/* periodic */
|
||||
status &= ~RX8025_BIT_CTRL2_CTFG;
|
||||
local_irq_disable();
|
||||
rtc_update_irq(rx8025->rtc, 1, RTC_PF | RTC_IRQF);
|
||||
local_irq_enable();
|
||||
}
|
||||
|
||||
if (status & RX8025_BIT_CTRL2_DAFG) {
|
||||
/* alarm */
|
||||
status &= RX8025_BIT_CTRL2_DAFG;
|
||||
if (rx8025_write_reg(client, RX8025_REG_CTRL1,
|
||||
rx8025->ctrl1 & ~RX8025_BIT_CTRL1_DALE))
|
||||
goto out;
|
||||
local_irq_disable();
|
||||
rtc_update_irq(rx8025->rtc, 1, RTC_AF | RTC_IRQF);
|
||||
local_irq_enable();
|
||||
}
|
||||
|
||||
/* acknowledge IRQ */
|
||||
rx8025_write_reg(client, RX8025_REG_CTRL2,
|
||||
status | RX8025_BIT_CTRL2_XST);
|
||||
|
||||
out:
|
||||
if (!rx8025->exiting)
|
||||
enable_irq(client->irq);
|
||||
|
||||
mutex_unlock(lock);
|
||||
}
|
||||
|
||||
static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
|
||||
{
|
||||
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
||||
u8 date[7];
|
||||
int err;
|
||||
|
||||
err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
dev_dbg(dev, "%s: read 0x%02x 0x%02x "
|
||||
"0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", __func__,
|
||||
date[0], date[1], date[2], date[3], date[4],
|
||||
date[5], date[6]);
|
||||
|
||||
dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f);
|
||||
dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f);
|
||||
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
||||
dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f);
|
||||
else
|
||||
dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12
|
||||
+ (date[RX8025_REG_HOUR] & 0x20 ? 12 : 0);
|
||||
|
||||
dt->tm_mday = bcd2bin(date[RX8025_REG_MDAY] & 0x3f);
|
||||
dt->tm_mon = bcd2bin(date[RX8025_REG_MONTH] & 0x1f) - 1;
|
||||
dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]);
|
||||
|
||||
if (dt->tm_year < 70)
|
||||
dt->tm_year += 100;
|
||||
|
||||
dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
|
||||
dt->tm_sec, dt->tm_min, dt->tm_hour,
|
||||
dt->tm_mday, dt->tm_mon, dt->tm_year);
|
||||
|
||||
return rtc_valid_tm(dt);
|
||||
}
|
||||
|
||||
static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
|
||||
{
|
||||
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
||||
u8 date[7];
|
||||
|
||||
/*
|
||||
* BUG: The HW assumes every year that is a multiple of 4 to be a leap
|
||||
* year. Next time this is wrong is 2100, which will not be a leap
|
||||
* year.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here the read-only bits are written as "0". I'm not sure if that
|
||||
* is sound.
|
||||
*/
|
||||
date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec);
|
||||
date[RX8025_REG_MIN] = bin2bcd(dt->tm_min);
|
||||
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
||||
date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour);
|
||||
else
|
||||
date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0)
|
||||
| bin2bcd((dt->tm_hour + 11) % 12 + 1);
|
||||
|
||||
date[RX8025_REG_WDAY] = bin2bcd(dt->tm_wday);
|
||||
date[RX8025_REG_MDAY] = bin2bcd(dt->tm_mday);
|
||||
date[RX8025_REG_MONTH] = bin2bcd(dt->tm_mon + 1);
|
||||
date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year % 100);
|
||||
|
||||
dev_dbg(dev,
|
||||
"%s: write 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
||||
__func__,
|
||||
date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
|
||||
|
||||
return rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date);
|
||||
}
|
||||
|
||||
static int rx8025_init_client(struct i2c_client *client, int *need_reset)
|
||||
{
|
||||
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
||||
u8 ctrl[2], ctrl2;
|
||||
int need_clear = 0;
|
||||
int err;
|
||||
|
||||
err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
/* Keep test bit zero ! */
|
||||
rx8025->ctrl1 = ctrl[0] & ~RX8025_BIT_CTRL1_TEST;
|
||||
|
||||
if (ctrl[1] & RX8025_BIT_CTRL2_PON) {
|
||||
dev_warn(&client->dev, "power-on reset was detected, "
|
||||
"you may have to readjust the clock\n");
|
||||
*need_reset = 1;
|
||||
}
|
||||
|
||||
if (ctrl[1] & RX8025_BIT_CTRL2_VDET) {
|
||||
dev_warn(&client->dev, "a power voltage drop was detected, "
|
||||
"you may have to readjust the clock\n");
|
||||
*need_reset = 1;
|
||||
}
|
||||
|
||||
if (!(ctrl[1] & RX8025_BIT_CTRL2_XST)) {
|
||||
dev_warn(&client->dev, "Oscillation stop was detected,"
|
||||
"you may have to readjust the clock\n");
|
||||
*need_reset = 1;
|
||||
}
|
||||
|
||||
if (ctrl[1] & (RX8025_BIT_CTRL2_DAFG | RX8025_BIT_CTRL2_WAFG)) {
|
||||
dev_warn(&client->dev, "Alarm was detected\n");
|
||||
need_clear = 1;
|
||||
}
|
||||
|
||||
if (!(ctrl[1] & RX8025_BIT_CTRL2_CTFG))
|
||||
need_clear = 1;
|
||||
|
||||
if (*need_reset || need_clear) {
|
||||
ctrl2 = ctrl[0];
|
||||
ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET |
|
||||
RX8025_BIT_CTRL2_CTFG | RX8025_BIT_CTRL2_WAFG |
|
||||
RX8025_BIT_CTRL2_DAFG);
|
||||
ctrl2 |= RX8025_BIT_CTRL2_XST;
|
||||
|
||||
err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
|
||||
}
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
/* Alarm support */
|
||||
static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
|
||||
{
|
||||
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
||||
struct i2c_client *client = rx8025->client;
|
||||
u8 ctrl2, ald[2];
|
||||
int err;
|
||||
|
||||
if (client->irq <= 0)
|
||||
return -EINVAL;
|
||||
|
||||
err = rx8025_read_regs(client, RX8025_REG_ALDMIN, 2, ald);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = rx8025_read_reg(client, RX8025_REG_CTRL2, &ctrl2);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
dev_dbg(dev, "%s: read alarm 0x%02x 0x%02x ctrl2 %02x\n",
|
||||
__func__, ald[0], ald[1], ctrl2);
|
||||
|
||||
/* Hardware alarms precision is 1 minute! */
|
||||
t->time.tm_sec = 0;
|
||||
t->time.tm_min = bcd2bin(ald[0] & 0x7f);
|
||||
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
||||
t->time.tm_hour = bcd2bin(ald[1] & 0x3f);
|
||||
else
|
||||
t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
|
||||
+ (ald[1] & 0x20 ? 12 : 0);
|
||||
|
||||
t->time.tm_wday = -1;
|
||||
t->time.tm_mday = -1;
|
||||
t->time.tm_mon = -1;
|
||||
t->time.tm_year = -1;
|
||||
|
||||
dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n",
|
||||
__func__,
|
||||
t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
|
||||
t->time.tm_mday, t->time.tm_mon, t->time.tm_year);
|
||||
t->enabled = !!(rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE);
|
||||
t->pending = (ctrl2 & RX8025_BIT_CTRL2_DAFG) && t->enabled;
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
||||
u8 ald[2];
|
||||
int err;
|
||||
|
||||
if (client->irq <= 0)
|
||||
return -EINVAL;
|
||||
|
||||
/* Hardware alarm precision is 1 minute! */
|
||||
ald[0] = bin2bcd(t->time.tm_min);
|
||||
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
||||
ald[1] = bin2bcd(t->time.tm_hour);
|
||||
else
|
||||
ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0)
|
||||
| bin2bcd((t->time.tm_hour + 11) % 12 + 1);
|
||||
|
||||
dev_dbg(dev, "%s: write 0x%02x 0x%02x\n", __func__, ald[0], ald[1]);
|
||||
|
||||
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) {
|
||||
rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
|
||||
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
||||
rx8025->ctrl1);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (t->enabled) {
|
||||
rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE;
|
||||
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
||||
rx8025->ctrl1);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
||||
{
|
||||
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
||||
u8 ctrl1;
|
||||
int err;
|
||||
|
||||
ctrl1 = rx8025->ctrl1;
|
||||
if (enabled)
|
||||
ctrl1 |= RX8025_BIT_CTRL1_DALE;
|
||||
else
|
||||
ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
|
||||
|
||||
if (ctrl1 != rx8025->ctrl1) {
|
||||
rx8025->ctrl1 = ctrl1;
|
||||
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
||||
rx8025->ctrl1);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rx8025_irq_set_state(struct device *dev, int enabled)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
||||
int ctrl1;
|
||||
int err;
|
||||
|
||||
if (client->irq <= 0)
|
||||
return -ENXIO;
|
||||
|
||||
ctrl1 = rx8025->ctrl1 & ~RX8025_BIT_CTRL1_CT;
|
||||
if (enabled)
|
||||
ctrl1 |= RX8025_BIT_CTRL1_CT_1HZ;
|
||||
if (ctrl1 != rx8025->ctrl1) {
|
||||
rx8025->ctrl1 = ctrl1;
|
||||
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
||||
rx8025->ctrl1);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct rtc_class_ops rx8025_rtc_ops = {
|
||||
.read_time = rx8025_get_time,
|
||||
.set_time = rx8025_set_time,
|
||||
.read_alarm = rx8025_read_alarm,
|
||||
.set_alarm = rx8025_set_alarm,
|
||||
.alarm_irq_enable = rx8025_alarm_irq_enable,
|
||||
.irq_set_state = rx8025_irq_set_state,
|
||||
};
|
||||
|
||||
/*
|
||||
* Clock precision adjustment support
|
||||
*
|
||||
* According to the RX8025 SA/NB application manual the frequency and
|
||||
* temperature charateristics can be approximated using the following
|
||||
* equation:
|
||||
*
|
||||
* df = a * (ut - t)**2
|
||||
*
|
||||
* df: Frequency deviation in any temperature
|
||||
* a : Coefficient = (-35 +-5) * 10**-9
|
||||
* ut: Ultimate temperature in degree = +25 +-5 degree
|
||||
* t : Any temperature in degree
|
||||
*
|
||||
* Note that the clock adjustment in ppb must be entered (which is
|
||||
* the negative value of the deviation).
|
||||
*/
|
||||
static int rx8025_get_clock_adjust(struct device *dev, int *adj)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
u8 digoff;
|
||||
int err;
|
||||
|
||||
err = rx8025_read_reg(client, RX8025_REG_DIGOFF, &digoff);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
*adj = digoff >= 64 ? digoff - 128 : digoff;
|
||||
if (*adj > 0)
|
||||
(*adj)--;
|
||||
*adj *= -RX8025_ADJ_RESOLUTION;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rx8025_set_clock_adjust(struct device *dev, int adj)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
u8 digoff;
|
||||
int err;
|
||||
|
||||
adj /= -RX8025_ADJ_RESOLUTION;
|
||||
if (adj > RX8025_ADJ_DATA_MAX)
|
||||
adj = RX8025_ADJ_DATA_MAX;
|
||||
else if (adj < RX8025_ADJ_DATA_MIN)
|
||||
adj = RX8025_ADJ_DATA_MIN;
|
||||
else if (adj > 0)
|
||||
adj++;
|
||||
else if (adj < 0)
|
||||
adj += 128;
|
||||
digoff = adj;
|
||||
|
||||
err = rx8025_write_reg(client, RX8025_REG_DIGOFF, digoff);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
dev_dbg(dev, "%s: write 0x%02x\n", __func__, digoff);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
int err, adj;
|
||||
|
||||
err = rx8025_get_clock_adjust(dev, &adj);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
return sprintf(buf, "%d\n", adj);
|
||||
}
|
||||
|
||||
static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
int adj, err;
|
||||
|
||||
if (sscanf(buf, "%i", &adj) != 1)
|
||||
return -EINVAL;
|
||||
|
||||
err = rx8025_set_clock_adjust(dev, adj);
|
||||
|
||||
return err ? err : count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(clock_adjust_ppb, S_IRUGO | S_IWUSR,
|
||||
rx8025_sysfs_show_clock_adjust,
|
||||
rx8025_sysfs_store_clock_adjust);
|
||||
|
||||
static int rx8025_sysfs_register(struct device *dev)
|
||||
{
|
||||
return device_create_file(dev, &dev_attr_clock_adjust_ppb);
|
||||
}
|
||||
|
||||
static void rx8025_sysfs_unregister(struct device *dev)
|
||||
{
|
||||
device_remove_file(dev, &dev_attr_clock_adjust_ppb);
|
||||
}
|
||||
|
||||
static int __devinit rx8025_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
||||
struct rx8025_data *rx8025;
|
||||
int err, need_reset = 0;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
|
||||
| I2C_FUNC_SMBUS_I2C_BLOCK)) {
|
||||
dev_err(&adapter->dev,
|
||||
"doesn't support required functionality\n");
|
||||
err = -EIO;
|
||||
goto errout;
|
||||
}
|
||||
|
||||
rx8025 = kzalloc(sizeof(*rx8025), GFP_KERNEL);
|
||||
if (!rx8025) {
|
||||
dev_err(&adapter->dev, "failed to alloc memory\n");
|
||||
err = -ENOMEM;
|
||||
goto errout;
|
||||
}
|
||||
|
||||
rx8025->client = client;
|
||||
i2c_set_clientdata(client, rx8025);
|
||||
INIT_WORK(&rx8025->work, rx8025_work);
|
||||
|
||||
err = rx8025_init_client(client, &need_reset);
|
||||
if (err)
|
||||
goto errout_free;
|
||||
|
||||
if (need_reset) {
|
||||
struct rtc_time tm;
|
||||
dev_info(&client->dev,
|
||||
"bad conditions detected, resetting date\n");
|
||||
rtc_time_to_tm(0, &tm); /* 1970/1/1 */
|
||||
rx8025_set_time(&client->dev, &tm);
|
||||
}
|
||||
|
||||
rx8025->rtc = rtc_device_register(client->name, &client->dev,
|
||||
&rx8025_rtc_ops, THIS_MODULE);
|
||||
if (IS_ERR(rx8025->rtc)) {
|
||||
err = PTR_ERR(rx8025->rtc);
|
||||
dev_err(&client->dev, "unable to register the class device\n");
|
||||
goto errout_free;
|
||||
}
|
||||
|
||||
if (client->irq > 0) {
|
||||
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
|
||||
err = request_irq(client->irq, rx8025_irq,
|
||||
0, "rx8025", client);
|
||||
if (err) {
|
||||
dev_err(&client->dev, "unable to request IRQ\n");
|
||||
goto errout_reg;
|
||||
}
|
||||
}
|
||||
|
||||
rx8025->rtc->irq_freq = 1;
|
||||
rx8025->rtc->max_user_freq = 1;
|
||||
|
||||
err = rx8025_sysfs_register(&client->dev);
|
||||
if (err)
|
||||
goto errout_irq;
|
||||
|
||||
return 0;
|
||||
|
||||
errout_irq:
|
||||
if (client->irq > 0)
|
||||
free_irq(client->irq, client);
|
||||
|
||||
errout_reg:
|
||||
rtc_device_unregister(rx8025->rtc);
|
||||
|
||||
errout_free:
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(rx8025);
|
||||
|
||||
errout:
|
||||
dev_err(&adapter->dev, "probing for rx8025 failed\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit rx8025_remove(struct i2c_client *client)
|
||||
{
|
||||
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
||||
struct mutex *lock = &rx8025->rtc->ops_lock;
|
||||
|
||||
if (client->irq > 0) {
|
||||
mutex_lock(lock);
|
||||
rx8025->exiting = 1;
|
||||
mutex_unlock(lock);
|
||||
|
||||
free_irq(client->irq, client);
|
||||
flush_scheduled_work();
|
||||
}
|
||||
|
||||
rx8025_sysfs_unregister(&client->dev);
|
||||
rtc_device_unregister(rx8025->rtc);
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(rx8025);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver rx8025_driver = {
|
||||
.driver = {
|
||||
.name = "rtc-rx8025",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = rx8025_probe,
|
||||
.remove = __devexit_p(rx8025_remove),
|
||||
.id_table = rx8025_id,
|
||||
};
|
||||
|
||||
static int __init rx8025_init(void)
|
||||
{
|
||||
return i2c_add_driver(&rx8025_driver);
|
||||
}
|
||||
|
||||
static void __exit rx8025_exit(void)
|
||||
{
|
||||
i2c_del_driver(&rx8025_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
|
||||
MODULE_DESCRIPTION("RX-8025 SA/NB RTC driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(rx8025_init);
|
||||
module_exit(rx8025_exit);
|
||||
Loading…
Reference in New Issue
Block a user