diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index 5bff93c89a23..caf24b21e7f5 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -82,17 +82,16 @@ Drives are normally found by auto-probing and/or examining the CMOS/BIOS data. For really weird situations, the apparent (fdisk) geometry can also be specified on the kernel "command line" using LILO. The format of such lines is: - hdx=cyls,heads,sects -or hdx=cdrom + ide_core.chs=[interface_number.device_number]:cyls,heads,sects +or ide_core.cdrom=[interface_number.device_number] -where hdx can be any of hda through hdh, Three values are required -(cyls,heads,sects). For example: +For example: - hdc=1050,32,64 hdd=cdrom + ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1 -either {hda,hdb} or {hdc,hdd}. The results of successful auto-probing may -override the physical geometry/irq specified, though the "original" geometry -may be retained as the "logical" geometry for partitioning purposes (fdisk). +The results of successful auto-probing may override the physical geometry/irq +specified, though the "original" geometry may be retained as the "logical" +geometry for partitioning purposes (fdisk). If the auto-probing during boot time confuses a drive (ie. the drive works with hd.c but not with ide.c), then an command line option may be specified @@ -101,7 +100,7 @@ probe/identification sequence. For example: ide_core.noprobe=0.1 or - hdc=768,16,32 + ide_core.chs=1.0:768,16,32 ide_core.noprobe=1.0 Note that when only one IDE device is attached to an interface, it should be @@ -118,9 +117,9 @@ If for some reason your cdrom drive is *not* found at boot time, you can force the probe to look harder by supplying a kernel command line parameter via LILO, such as: - hdc=cdrom /* hdc = "master" on second interface */ + ide_core.cdrom=1.0 /* "master" on second interface (hdc) */ or - hdd=cdrom /* hdd = "slave" on second interface */ + ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */ For example, a GW2000 system might have a hard drive on the primary interface (/dev/hda) and an IDE cdrom drive on the secondary interface @@ -182,12 +181,6 @@ driver using the "options=" keyword to insmod, while replacing any ',' with Summary of ide driver parameters for kernel command line -------------------------------------------------------- - "hdx=" is recognized for all "x" from "a" to "u", such as "hdc". - - "hdx=cdrom" : drive is present, and is a cdrom drive - - "hdx=cyl,head,sect" : disk drive is present, with specified geometry - "ide=doubler" : probe/support IDE doublers on Amiga There may be more options than shown -- use the source, Luke! @@ -230,6 +223,10 @@ Other kernel parameters for ide_core are: * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit +* "cdrom=[interface_number.device_number]" to force device as a CD-ROM + +* "chs=[interface_number.device_number]" to force device as a disk (using CHS) + ================================================================================ Some Terminology diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index d8f40ee74ce8..a4bceeecde70 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -924,7 +924,7 @@ static int __init ide_setup(char *s) drive->media = ide_cdrom; /* an ATAPI device ignores DRDY */ drive->ready_stat = 0; - goto done; + goto obsolete_option; case -5: /* nodma */ drive->nodma = 1; goto obsolete_option; @@ -948,7 +948,7 @@ static int __init ide_setup(char *s) drive->sect = drive->bios_sect = vals[2]; drive->present = 1; drive->forced_geom = 1; - goto done; + goto obsolete_option; default: goto bad_option; } @@ -975,9 +975,6 @@ static int __init ide_setup(char *s) obsolete_option: printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); return 1; -done: - printk("\n"); - return 1; } EXPORT_SYMBOL(ide_lock); @@ -1167,6 +1164,51 @@ static unsigned int ide_nowerr; module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device"); +static unsigned int ide_cdroms; + +module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0); +MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); + +struct chs_geom { + unsigned int cyl; + u8 head; + u8 sect; +}; + +static unsigned int ide_disks; +static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; + +static int ide_set_disk_chs(const char *str, struct kernel_param *kp) +{ + int a, b, c = 0, h = 0, s = 0, i, j = 1; + + if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && + sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (c > INT_MAX || h > 255 || s > 255) + return -EINVAL; + + if (j) + ide_disks |= (1 << i); + else + ide_disks &= (1 << i); + + ide_disks_chs[i].cyl = c; + ide_disks_chs[i].head = h; + ide_disks_chs[i].sect = s; + + return 0; +} + +module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); +MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); + static void ide_dev_apply_params(ide_drive_t *drive) { int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit; @@ -1189,6 +1231,25 @@ static void ide_dev_apply_params(ide_drive_t *drive) drive->name); drive->bad_wstat = BAD_R_STAT; } + if (ide_cdroms & (1 << i)) { + printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); + drive->present = 1; + drive->media = ide_cdrom; + /* an ATAPI device ignores DRDY */ + drive->ready_stat = 0; + } + if (ide_disks & (1 << i)) { + drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl; + drive->head = drive->bios_head = ide_disks_chs[i].head; + drive->sect = drive->bios_sect = ide_disks_chs[i].sect; + drive->forced_geom = 1; + printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", + drive->name, + drive->cyl, drive->head, drive->sect); + drive->present = 1; + drive->media = ide_disk; + drive->ready_stat = READY_STAT; + } } static unsigned int ide_ignore_cable;