luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver

Browse Source 
Framebuffer driver for the SH7760/SH7763 integrated LCD controller.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Nobuhiro Iwamatsu 2008-07-23 21:31:46 -07:00 committed by Linus Torvalds
parent c6b044d6ba
commit 4a25e41831
5 changed files with 1000 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

131
Documentation/fb/sh7760fb.txt Normal file
View File

@ -0,0 +1,131 @@
SH7760/SH7763 integrated LCDC Framebuffer driver
================================================
0. Overwiew
-----------
The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
supports (in theory) resolutions ranging from 1x1 to 1024x1024,
with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
Caveats:
* Framebuffer memory must be a large chunk allocated at the top
of Area3 (HW requirement). Because of this requirement you should NOT
make the driver a module since at runtime it may become impossible to
get a large enough contiguous chunk of memory.
* The driver does not support changing resolution while loaded
(displays aren't hotpluggable anyway)
* Heavy flickering may be observed
a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
b) during PCMCIA (or any other slow bus) activity.
* Rotation works only 90degress clockwise, and only if horizontal
resolution is <= 320 pixels.
files: drivers/video/sh7760fb.c
include/asm-sh/sh7760fb.h
Documentation/fb/sh7760fb.txt
1. Platform setup
-----------------
SH7760:
Video data is fetched via the DMABRG DMA engine, so you have to
configure the SH DMAC for DMABRG mode (write 0x94808080 to the
DMARSRA register somewhere at boot).
PFC registers PCCR and PCDR must be set to peripheral mode.
(write zeros to both).
The driver does NOT do the above for you since board setup is, well, job
of the board setup code.
2. Panel definitions
--------------------
The LCDC must explicitly be told about the type of LCD panel
attached. Data must be wrapped in a "struct sh7760fb_platdata" and
passed to the driver as platform_data.
Suggest you take a closer look at the SH7760 Manual, Section 30.
(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
The following code illustrates what needs to be done to
get the framebuffer working on a 640x480 TFT:
====================== cut here ======================================
#include <linux/fb.h>
#include <asm/sh7760fb.h>
/*
* NEC NL6440bc26-01 640x480 TFT
* dotclock 25175 kHz
* Xres 640 Yres 480
* Htotal 800 Vtotal 525
* HsynStart 656 VsynStart 490
* HsynLenn 30 VsynLenn 2
*
* The linux framebuffer layer does not use the syncstart/synclen
* values but right/left/upper/lower margin values. The comments
* for the x_margin explain how to calculate those from given
* panel sync timings.
*/
static struct fb_videomode nl6448bc26 = {
.name = "NL6448BC26",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39683, /* in picoseconds! */
.hsync_len = 30,
.vsync_len = 2,
.left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */
.right_margin = 16, /* HSYNSTART - XRES */
.upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */
.lower_margin = 10, /* VSYNSTART - YRES */
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
};
static struct sh7760fb_platdata sh7760fb_nl6448 = {
.def_mode = &nl6448bc26,
.ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */
.lddfr = LDDFR_8BPP, /* we want 8bit output */
.ldpmmr = 0x0070,
.ldpspr = 0x0500,
.ldaclnr = 0,
.ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
LDICKR_CLKDIV(1),
.rotate = 0,
.novsync = 1,
.blank = NULL,
};
/* SH7760:
* 0xFE300800: 256 * 4byte xRGB palette ram
* 0xFE300C00: 42 bytes ctrl registers
*/
static struct resource sh7760_lcdc_res[] = {
[0] = {
.start = 0xFE300800,
.end = 0xFE300CFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sh7760_lcdc_dev = {
.dev = {
.platform_data = &sh7760fb_nl6448,
},
.name = "sh7760-lcdc",
.id = -1,
.resource = sh7760_lcdc_res,
.num_resources = ARRAY_SIZE(sh7760_lcdc_res),
};
====================== cut here ======================================

13
drivers/video/Kconfig
View File

@ -1991,6 +1991,19 @@ config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
config FB_SH7760
bool "SH7760/SH7763 LCDC support"
depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
Supports display resolutions up to 1024x1024 pixel, grayscale and
color operation, with depths ranging from 1 bpp to 8 bpp monochrome
and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
panels <= 320 pixel horizontal resolution.
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB

1
drivers/video/Makefile
View File

@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o

658
drivers/video/sh7760fb.c Normal file
View File

@ -0,0 +1,658 @@
/*
* SH7760/SH7763 LCDC Framebuffer driver.
*
* (c) 2006-2008 MSC Vertriebsges.m.b.H.,
* Manuel Lauss <mano@roarinelk.homelinux.net>
* (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.txt!
*
* Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
* for his original source and testing!
*/
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fb.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/sh7760fb.h>
struct sh7760fb_par {
void __iomem *base;
int irq;
struct sh7760fb_platdata *pd; /* display information */
dma_addr_t fbdma; /* physical address */
int rot; /* rotation enabled? */
u32 pseudo_palette[16];
struct platform_device *dev;
struct resource *ioarea;
struct completion vsync; /* vsync irq event */
};
static irqreturn_t sh7760fb_irq(int irq, void *data)
{
struct completion *c = data;
complete(c);
return IRQ_HANDLED;
}
static void sh7760fb_wait_vsync(struct fb_info *info)
{
struct sh7760fb_par *par = info->par;
if (par->pd->novsync)
return;
iowrite16(ioread16(par->base + LDINTR) & ~VINT_CHECK,
par->base + LDINTR);
if (par->irq < 0) {
/* poll for vert. retrace: status bit is sticky */
while (!(ioread16(par->base + LDINTR) & VINT_CHECK))
cpu_relax();
} else {
/* a "wait_for_irq_event(par->irq)" would be extremely nice */
init_completion(&par->vsync);
enable_irq(par->irq);
wait_for_completion(&par->vsync);
disable_irq_nosync(par->irq);
}
}
/* wait_for_lps - wait until power supply has reached a certain state. */
static int wait_for_lps(struct sh7760fb_par *par, int val)
{
int i = 100;
while (--i && ((ioread16(par->base + LDPMMR) & 3) != val))
msleep(1);
if (i <= 0)
return -ETIMEDOUT;
return 0;
}
/* en/disable the LCDC */
static int sh7760fb_blank(int blank, struct fb_info *info)
{
struct sh7760fb_par *par = info->par;
struct sh7760fb_platdata *pd = par->pd;
unsigned short cntr = ioread16(par->base + LDCNTR);
unsigned short intr = ioread16(par->base + LDINTR);
int lps;
if (blank == FB_BLANK_UNBLANK) {
intr |= VINT_START;
cntr = LDCNTR_DON2 | LDCNTR_DON;
lps = 3;
} else {
intr &= ~VINT_START;
cntr = LDCNTR_DON2;
lps = 0;
}
if (pd->blank)
pd->blank(blank);
iowrite16(intr, par->base + LDINTR);
iowrite16(cntr, par->base + LDCNTR);
return wait_for_lps(par, lps);
}
/* set color registers */
static int sh7760fb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
{
struct sh7760fb_par *par = info->par;
u32 s = cmap->start;
u32 l = cmap->len;
u16 *r = cmap->red;
u16 *g = cmap->green;
u16 *b = cmap->blue;
u32 col, tmo;
int ret;
ret = 0;
sh7760fb_wait_vsync(info);
/* request palette access */
iowrite16(LDPALCR_PALEN, par->base + LDPALCR);
/* poll for access grant */
tmo = 100;
while (!(ioread16(par->base + LDPALCR) & LDPALCR_PALS) && (--tmo))
cpu_relax();
if (!tmo) {
ret = 1;
dev_dbg(info->dev, "no palette access!\n");
goto out;
}
while (l && (s < 256)) {
col = ((*r) & 0xff) << 16;
col |= ((*g) & 0xff) << 8;
col |= ((*b) & 0xff);
col &= SH7760FB_PALETTE_MASK;
if (s < 16)
((u32 *) (info->pseudo_palette))[s] = s;
s++;
l--;
r++;
g++;
b++;
}
out:
iowrite16(0, par->base + LDPALCR);
return ret;
}
static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
unsigned long stride)
{
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
strcpy(fix->id, "sh7760-lcdc");
fix->smem_start = (unsigned long)info->screen_base;
fix->smem_len = info->screen_size;
fix->line_length = stride;
}
static int sh7760fb_get_color_info(struct device *dev,
u16 lddfr, int *bpp, int *gray)
{
int lbpp, lgray;
lgray = lbpp = 0;
switch (lddfr & LDDFR_COLOR_MASK) {
case LDDFR_1BPP_MONO:
lgray = 1;
lbpp = 1;
break;
case LDDFR_2BPP_MONO:
lgray = 1;
lbpp = 2;
break;
case LDDFR_4BPP_MONO:
lgray = 1;
case LDDFR_4BPP:
lbpp = 4;
break;
case LDDFR_6BPP_MONO:
lgray = 1;
case LDDFR_8BPP:
lbpp = 8;
break;
case LDDFR_16BPP_RGB555:
case LDDFR_16BPP_RGB565:
lbpp = 16;
lgray = 0;
break;
default:
dev_dbg(dev, "unsupported LDDFR bit depth.\n");
return -EINVAL;
}
if (bpp)
*bpp = lbpp;
if (gray)
*gray = lgray;
return 0;
}
static int sh7760fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct fb_fix_screeninfo *fix = &info->fix;
struct sh7760fb_par *par = info->par;
int ret, bpp;
/* get color info from register value */
ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
if (ret)
return ret;
var->bits_per_pixel = bpp;
if ((var->grayscale) && (var->bits_per_pixel == 1))
fix->visual = FB_VISUAL_MONO10;
else if (var->bits_per_pixel >= 15)
fix->visual = FB_VISUAL_TRUECOLOR;
else
fix->visual = FB_VISUAL_PSEUDOCOLOR;
/* TODO: add some more validation here */
return 0;
}
/*
* sh7760fb_set_par - set videomode.
*
* NOTE: The rotation, grayscale and DSTN codepaths are
* totally untested!
*/
static int sh7760fb_set_par(struct fb_info *info)
{
struct sh7760fb_par *par = info->par;
struct fb_videomode *vm = par->pd->def_mode;
unsigned long sbase, dstn_off, ldsarl, stride;
unsigned short hsynp, hsynw, htcn, hdcn;
unsigned short vsynp, vsynw, vtln, vdln;
unsigned short lddfr, ldmtr;
int ret, bpp, gray;
par->rot = par->pd->rotate;
/* rotate only works with xres <= 320 */
if (par->rot && (vm->xres > 320)) {
dev_dbg(info->dev, "rotation disabled due to display size\n");
par->rot = 0;
}
/* calculate LCDC reg vals from display parameters */
hsynp = vm->right_margin + vm->xres;
hsynw = vm->hsync_len;
htcn = vm->left_margin + hsynp + hsynw;
hdcn = vm->xres;
vsynp = vm->lower_margin + vm->yres;
vsynw = vm->vsync_len;
vtln = vm->upper_margin + vsynp + vsynw;
vdln = vm->yres;
/* get color info from register value */
ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, &gray);
if (ret)
return ret;
dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
vdln, bpp, gray ? "grayscale" : "color",
par->rot ? "rotated" : "normal");
#ifdef CONFIG_CPU_LITTLE_ENDIAN
lddfr = par->pd->lddfr | (1 << 8);
#else
lddfr = par->pd->lddfr & ~(1 << 8);
#endif
ldmtr = par->pd->ldmtr;
if (!(vm->sync & FB_SYNC_HOR_HIGH_ACT))
ldmtr |= LDMTR_CL1POL;
if (!(vm->sync & FB_SYNC_VERT_HIGH_ACT))
ldmtr |= LDMTR_FLMPOL;
/* shut down LCDC before changing display parameters */
sh7760fb_blank(FB_BLANK_POWERDOWN, info);
iowrite16(par->pd->ldickr, par->base + LDICKR); /* pixclock */
iowrite16(ldmtr, par->base + LDMTR); /* polarities */
iowrite16(lddfr, par->base + LDDFR); /* color/depth */
iowrite16((par->rot ? 1 << 13 : 0), par->base + LDSMR); /* rotate */
iowrite16(par->pd->ldpmmr, par->base + LDPMMR); /* Power Management */
iowrite16(par->pd->ldpspr, par->base + LDPSPR); /* Power Supply Ctrl */
/* display resolution */
iowrite16(((htcn >> 3) - 1) | (((hdcn >> 3) - 1) << 8),
par->base + LDHCNR);
iowrite16(vdln - 1, par->base + LDVDLNR);
iowrite16(vtln - 1, par->base + LDVTLNR);
/* h/v sync signals */
iowrite16((vsynp - 1) | ((vsynw - 1) << 12), par->base + LDVSYNR);
iowrite16(((hsynp >> 3) - 1) | (((hsynw >> 3) - 1) << 12),
par->base + LDHSYNR);
/* AC modulation sig */
iowrite16(par->pd->ldaclnr, par->base + LDACLNR);
stride = (par->rot) ? vtln : hdcn;
if (!gray)
stride *= (bpp + 7) >> 3;
else {
if (bpp == 1)
stride >>= 3;
else if (bpp == 2)
stride >>= 2;
else if (bpp == 4)
stride >>= 1;
/* 6 bpp == 8 bpp */
}
/* if rotated, stride must be power of 2 */
if (par->rot) {
unsigned long bit = 1 << 31;
while (bit) {
if (stride & bit)
break;
bit >>= 1;
}
if (stride & ~bit)
stride = bit << 1; /* not P-o-2, round up */
}
iowrite16(stride, par->base + LDLAOR);
/* set display mem start address */
sbase = (unsigned long)par->fbdma;
if (par->rot)
sbase += (hdcn - 1) * stride;
iowrite32(sbase, par->base + LDSARU);
/*
* for DSTN need to set address for lower half.
* I (mlau) don't know which address to set it to,
* so I guessed at (stride * yres/2).
*/
if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) &&
((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) {
dev_dbg(info->dev, " ***** DSTN untested! *****\n");
dstn_off = stride;
if (par->rot)
dstn_off *= hdcn >> 1;
else
dstn_off *= vdln >> 1;
ldsarl = sbase + dstn_off;
} else
ldsarl = 0;
iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */
encode_fix(&info->fix, info, stride);
sh7760fb_check_var(&info->var, info);
sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */
dev_dbg(info->dev, "hdcn : %6d htcn : %6d\n", hdcn, htcn);
dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
dev_dbg(info->dev, "vdln : %6d vtln : %6d\n", vdln, vtln);
dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n",
(par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f);
dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
par->pd->ldpspr);
dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
dev_dbg(info->dev, "ldlaor: %ld\n", stride);
dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
return 0;
}
static struct fb_ops sh7760fb_ops = {
.owner = THIS_MODULE,
.fb_blank = sh7760fb_blank,
.fb_check_var = sh7760fb_check_var,
.fb_setcmap = sh7760fb_setcmap,
.fb_set_par = sh7760fb_set_par,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
static void sh7760fb_free_mem(struct fb_info *info)
{
struct sh7760fb_par *par = info->par;
if (!info->screen_base)
return;
dma_free_coherent(info->dev, info->screen_size,
info->screen_base, par->fbdma);
par->fbdma = 0;
info->screen_base = NULL;
info->screen_size = 0;
}
/* allocate the framebuffer memory. This memory must be in Area3,
* (dictated by the DMA engine) and contiguous, at a 512 byte boundary.
*/
static int sh7760fb_alloc_mem(struct fb_info *info)
{
struct sh7760fb_par *par = info->par;
void *fbmem;
unsigned long vram;
int ret, bpp;
if (info->screen_base)
return 0;
/* get color info from register value */
ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
if (ret) {
printk(KERN_ERR "colinfo\n");
return ret;
}
/* min VRAM: xres_min = 16, yres_min = 1, bpp = 1: 2byte -> 1 page
max VRAM: xres_max = 1024, yres_max = 1024, bpp = 16: 2MB */
vram = info->var.xres * info->var.yres;
if (info->var.grayscale) {
if (bpp == 1)
vram >>= 3;
else if (bpp == 2)
vram >>= 2;
else if (bpp == 4)
vram >>= 1;
} else if (bpp > 8)
vram *= 2;
if ((vram < 1) || (vram > 1024 * 2048)) {
dev_dbg(info->dev, "too much VRAM required. Check settings\n");
return -ENODEV;
}
if (vram < PAGE_SIZE)
vram = PAGE_SIZE;
fbmem = dma_alloc_coherent(info->dev, vram, &par->fbdma, GFP_KERNEL);
if (!fbmem)
return -ENOMEM;
if ((par->fbdma & SH7760FB_DMA_MASK) != SH7760FB_DMA_MASK) {
sh7760fb_free_mem(info);
dev_err(info->dev, "kernel gave me memory at 0x%08lx, which is"
"unusable for the LCDC\n", (unsigned long)par->fbdma);
return -ENOMEM;
}
info->screen_base = fbmem;
info->screen_size = vram;
return 0;
}
static int __devinit sh7760fb_probe(struct platform_device *pdev)
{
struct fb_info *info;
struct resource *res;
struct sh7760fb_par *par;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(res == NULL)) {
dev_err(&pdev->dev, "invalid resource\n");
return -EINVAL;
}
info = framebuffer_alloc(sizeof(struct sh7760fb_par), &pdev->dev);
if (!info)
return -ENOMEM;
par = info->par;
par->dev = pdev;
par->pd = pdev->dev.platform_data;
if (!par->pd) {
dev_dbg(info->dev, "no display setup data!\n");
ret = -ENODEV;
goto out_fb;
}
par->ioarea = request_mem_region(res->start,
(res->end - res->start), pdev->name);
if (!par->ioarea) {
dev_err(&pdev->dev, "mmio area busy\n");
ret = -EBUSY;
goto out_fb;
}
par->base = ioremap_nocache(res->start, res->end - res->start + 1);
if (!par->base) {
dev_err(&pdev->dev, "cannot remap\n");
ret = -ENODEV;
goto out_res;
}
iowrite16(0, par->base + LDINTR); /* disable vsync irq */
par->irq = platform_get_irq(pdev, 0);
if (par->irq >= 0) {
ret = request_irq(par->irq, sh7760fb_irq, 0,
"sh7760-lcdc", &par->vsync);
if (ret) {
dev_err(&pdev->dev, "cannot grab IRQ\n");
par->irq = -ENXIO;
} else
disable_irq_nosync(par->irq);
}
fb_videomode_to_var(&info->var, par->pd->def_mode);
ret = sh7760fb_alloc_mem(info);
if (ret) {
dev_dbg(info->dev, "framebuffer memory allocation failed!\n");
goto out_unmap;
}
info->pseudo_palette = par->pseudo_palette;
/* fixup color register bitpositions. These are fixed by hardware */
info->var.red.offset = 11;
info->var.red.length = 5;
info->var.red.msb_right = 0;
info->var.green.offset = 5;
info->var.green.length = 6;
info->var.green.msb_right = 0;
info->var.blue.offset = 0;
info->var.blue.length = 5;
info->var.blue.msb_right = 0;
info->var.transp.offset = 0;
info->var.transp.length = 0;
info->var.transp.msb_right = 0;
/* set the DON2 bit now, before cmap allocation, as it will randomize
* palette memory.
*/
iowrite16(LDCNTR_DON2, par->base + LDCNTR);
info->fbops = &sh7760fb_ops;
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret) {
dev_dbg(info->dev, "Unable to allocate cmap memory\n");
goto out_mem;
}
ret = register_framebuffer(info);
if (ret < 0) {
dev_dbg(info->dev, "cannot register fb!\n");
goto out_cmap;
}
platform_set_drvdata(pdev, info);
printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n",
pdev->name,
(unsigned long)par->fbdma,
(unsigned long)(par->fbdma + info->screen_size - 1),
info->screen_size >> 10);
return 0;
out_cmap:
sh7760fb_blank(FB_BLANK_POWERDOWN, info);
fb_dealloc_cmap(&info->cmap);
out_mem:
sh7760fb_free_mem(info);
out_unmap:
if (par->irq >= 0)
free_irq(par->irq, &par->vsync);
iounmap(par->base);
out_res:
release_resource(par->ioarea);
kfree(par->ioarea);
out_fb:
framebuffer_release(info);
return ret;
}
static int __devexit sh7760fb_remove(struct platform_device *dev)
{
struct fb_info *info = platform_get_drvdata(dev);
struct sh7760fb_par *par = info->par;
sh7760fb_blank(FB_BLANK_POWERDOWN, info);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
sh7760fb_free_mem(info);
if (par->irq >= 0)
free_irq(par->irq, par);
iounmap(par->base);
release_resource(par->ioarea);
kfree(par->ioarea);
framebuffer_release(info);
platform_set_drvdata(dev, NULL);
return 0;
}
static struct platform_driver sh7760_lcdc_driver = {
.driver = {
.name = "sh7760-lcdc",
.owner = THIS_MODULE,
},
.probe = sh7760fb_probe,
.remove = __devexit_p(sh7760fb_remove),
};
static int __init sh7760fb_init(void)
{
return platform_driver_register(&sh7760_lcdc_driver);
}
static void __exit sh7760fb_exit(void)
{
platform_driver_unregister(&sh7760_lcdc_driver);
}
module_init(sh7760fb_init);
module_exit(sh7760fb_exit);
MODULE_AUTHOR("Nobuhiro Iwamatsu, Manuel Lauss");
MODULE_DESCRIPTION("FBdev for SH7760/63 integrated LCD Controller");
MODULE_LICENSE("GPL");

197
include/asm-sh/sh7760fb.h Normal file
View File

@ -0,0 +1,197 @@
/*
* sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
*
* (c) 2006-2008 MSC Vertriebsges.m.b.H.,
* Manuel Lauss <mano@roarinelk.homelinux.net>
* (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
*/
#ifndef _ASM_SH_SH7760FB_H
#define _ASM_SH_SH7760FB_H
/*
* some bits of the colormap registers should be written as zero.
* create a mask for that.
*/
#define SH7760FB_PALETTE_MASK 0x00f8fcf8
/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
#define SH7760FB_DMA_MASK 0x0C000000
/* palette */
#define LDPR(x) (((x) << 2))
/* framebuffer registers and bits */
#define LDICKR 0x400
#define LDMTR 0x402
/* see sh7760fb.h for LDMTR bits */
#define LDDFR 0x404
#define LDDFR_PABD (1 << 8)
#define LDDFR_COLOR_MASK 0x7F
#define LDSMR 0x406
#define LDSMR_ROT (1 << 13)
#define LDSARU 0x408
#define LDSARL 0x40c
#define LDLAOR 0x410
#define LDPALCR 0x412
#define LDPALCR_PALS (1 << 4)
#define LDPALCR_PALEN (1 << 0)
#define LDHCNR 0x414
#define LDHSYNR 0x416
#define LDVDLNR 0x418
#define LDVTLNR 0x41a
#define LDVSYNR 0x41c
#define LDACLNR 0x41e
#define LDINTR 0x420
#define LDPMMR 0x424
#define LDPSPR 0x426
#define LDCNTR 0x428
#define LDCNTR_DON (1 << 0)
#define LDCNTR_DON2 (1 << 4)
#ifdef CONFIG_CPU_SUBTYPE_SH7763
# define LDLIRNR 0x440
/* LDINTR bit */
# define LDINTR_MINTEN (1 << 15)
# define LDINTR_FINTEN (1 << 14)
# define LDINTR_VSINTEN (1 << 13)
# define LDINTR_VEINTEN (1 << 12)
# define LDINTR_MINTS (1 << 11)
# define LDINTR_FINTS (1 << 10)
# define LDINTR_VSINTS (1 << 9)
# define LDINTR_VEINTS (1 << 8)
# define VINT_START (LDINTR_VSINTEN)
# define VINT_CHECK (LDINTR_VSINTS)
#else
/* LDINTR bit */
# define LDINTR_VINTSEL (1 << 12)
# define LDINTR_VINTE (1 << 8)
# define LDINTR_VINTS (1 << 0)
# define VINT_START (LDINTR_VINTSEL)
# define VINT_CHECK (LDINTR_VINTS)
#endif
/* HSYNC polarity inversion */
#define LDMTR_FLMPOL (1 << 15)
/* VSYNC polarity inversion */
#define LDMTR_CL1POL (1 << 14)
/* DISPLAY-ENABLE polarity inversion */
#define LDMTR_DISPEN_LOWACT (1 << 13)
/* DISPLAY DATA BUS polarity inversion */
#define LDMTR_DPOL_LOWACT (1 << 12)
/* AC modulation signal enable */
#define LDMTR_MCNT (1 << 10)
/* Disable output of HSYNC during VSYNC period */
#define LDMTR_CL1CNT (1 << 9)
/* Disable output of VSYNC during VSYNC period */
#define LDMTR_CL2CNT (1 << 8)
/* Display types supported by the LCDC */
#define LDMTR_STN_MONO_4 0x00
#define LDMTR_STN_MONO_8 0x01
#define LDMTR_STN_COLOR_4 0x08
#define LDMTR_STN_COLOR_8 0x09
#define LDMTR_STN_COLOR_12 0x0A
#define LDMTR_STN_COLOR_16 0x0B
#define LDMTR_DSTN_MONO_8 0x11
#define LDMTR_DSTN_MONO_16 0x13
#define LDMTR_DSTN_COLOR_8 0x19
#define LDMTR_DSTN_COLOR_12 0x1A
#define LDMTR_DSTN_COLOR_16 0x1B
#define LDMTR_TFT_COLOR_16 0x2B
/* framebuffer color layout */
#define LDDFR_1BPP_MONO 0x00
#define LDDFR_2BPP_MONO 0x01
#define LDDFR_4BPP_MONO 0x02
#define LDDFR_6BPP_MONO 0x04
#define LDDFR_4BPP 0x0A
#define LDDFR_8BPP 0x0C
#define LDDFR_16BPP_RGB555 0x1D
#define LDDFR_16BPP_RGB565 0x2D
/* LCDC Pixclock sources */
#define LCDC_CLKSRC_BUSCLOCK 0
#define LCDC_CLKSRC_PERIPHERAL 1
#define LCDC_CLKSRC_EXTERNAL 2
#define LDICKR_CLKSRC(x) \
(((x) & 3) << 12)
/* LCDC pixclock input divider. Set to 1 at a minimum! */
#define LDICKR_CLKDIV(x) \
((x) & 0x1f)
struct sh7760fb_platdata {
/* Set this member to a valid fb_videmode for the display you
* wish to use. The following members must be initialized:
* xres, yres, hsync_len, vsync_len, sync,
* {left,right,upper,lower}_margin.
* The driver uses the above members to calculate register values
* and memory requirements. Other members are ignored but may
* be used by other framebuffer layer components.
*/
struct fb_videomode *def_mode;
/* LDMTR includes display type and signal polarity. The
* HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
* data above; however the polarities of the following signals
* must be encoded in the ldmtr member:
* Display Enable signal (default high-active) DISPEN_LOWACT
* Display Data signals (default high-active) DPOL_LOWACT
* AC Modulation signal (default off) MCNT
* Hsync-During-Vsync suppression (default off) CL1CNT
* Vsync-during-vsync suppression (default off) CL2CNT
* NOTE: also set a display type!
* (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
*/
u16 ldmtr;
/* LDDFR controls framebuffer image format (depth, organization)
* Use ONE of the LDDFR_?BPP_* macros!
*/
u16 lddfr;
/* LDPMMR and LDPSPR control the timing of the power signals
* for the display. Please read the SH7760 Hardware Manual,
* Chapters 30.3.17, 30.3.18 and 30.4.6!
*/
u16 ldpmmr;
u16 ldpspr;
/* LDACLNR contains the line numbers after which the AC modulation
* signal is to toggle. Set to ZERO for TFTs or displays which
* do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
*/
u16 ldaclnr;
/* LDICKR contains information on pixelclock source and config.
* Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
* minimal value for CLKDIV() must be 1!.
*/
u16 ldickr;
/* set this member to 1 if you wish to use the LCDC's hardware
* rotation function. This is limited to displays <= 320x200
* pixels resolution!
*/
int rotate; /* set to 1 to rotate 90 CCW */
/* set this to 1 to suppress vsync irq use. */
int novsync;
/* blanking hook for platform. Set this if your platform can do
* more than the LCDC in terms of blanking (e.g. disable clock
* generator / backlight power supply / etc.
*/
void (*blank) (int);
};
#endif /* _ASM_SH_SH7760FB_H */