spi: Using Trigger number to transmit/receive data
In order to transmit and receive data when have 32 bytes of data that ready has prepared on Transmit/Receive Buffer to transmit or receive. Instead transmits/receives a byte data using Transmit/Receive Buffer Data Triggering Number will improve the speed of transfer data. Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
c517d838eb
commit
4b6fe3edcb
@ -177,6 +177,13 @@
|
||||
#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */
|
||||
#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
|
||||
#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
|
||||
/* QSPI on R-Car Gen2 */
|
||||
#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */
|
||||
#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */
|
||||
#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */
|
||||
#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */
|
||||
|
||||
#define QSPI_BUFFER_SIZE 32u
|
||||
|
||||
struct rspi_data {
|
||||
void __iomem *addr;
|
||||
@ -366,6 +373,52 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
|
||||
{
|
||||
u8 data;
|
||||
|
||||
data = rspi_read8(rspi, reg);
|
||||
data &= ~mask;
|
||||
data |= (val & mask);
|
||||
rspi_write8(rspi, data, reg);
|
||||
}
|
||||
|
||||
static int qspi_set_send_trigger(struct rspi_data *rspi, unsigned int len)
|
||||
{
|
||||
unsigned int n;
|
||||
|
||||
n = min(len, QSPI_BUFFER_SIZE);
|
||||
|
||||
if (len >= QSPI_BUFFER_SIZE) {
|
||||
/* sets triggering number to 32 bytes */
|
||||
qspi_update(rspi, SPBFCR_TXTRG_MASK,
|
||||
SPBFCR_TXTRG_32B, QSPI_SPBFCR);
|
||||
} else {
|
||||
/* sets triggering number to 1 byte */
|
||||
qspi_update(rspi, SPBFCR_TXTRG_MASK,
|
||||
SPBFCR_TXTRG_1B, QSPI_SPBFCR);
|
||||
}
|
||||
|
||||
return n;
|
||||
}
|
||||
|
||||
static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
|
||||
{
|
||||
unsigned int n;
|
||||
|
||||
n = min(len, QSPI_BUFFER_SIZE);
|
||||
|
||||
if (len >= QSPI_BUFFER_SIZE) {
|
||||
/* sets triggering number to 32 bytes */
|
||||
qspi_update(rspi, SPBFCR_RXTRG_MASK,
|
||||
SPBFCR_RXTRG_32B, QSPI_SPBFCR);
|
||||
} else {
|
||||
/* sets triggering number to 1 byte */
|
||||
qspi_update(rspi, SPBFCR_RXTRG_MASK,
|
||||
SPBFCR_RXTRG_1B, QSPI_SPBFCR);
|
||||
}
|
||||
}
|
||||
|
||||
#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
|
||||
|
||||
static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
|
||||
@ -609,18 +662,28 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
|
||||
return __rspi_can_dma(rspi, xfer);
|
||||
}
|
||||
|
||||
static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
|
||||
struct spi_transfer *xfer)
|
||||
{
|
||||
if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
|
||||
/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
|
||||
int ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
|
||||
xfer->rx_buf ? &xfer->rx_sg : NULL);
|
||||
if (ret != -EAGAIN)
|
||||
return 0;
|
||||
}
|
||||
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
static int rspi_common_transfer(struct rspi_data *rspi,
|
||||
struct spi_transfer *xfer)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
|
||||
/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
|
||||
ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
|
||||
xfer->rx_buf ? &xfer->rx_sg : NULL);
|
||||
if (ret != -EAGAIN)
|
||||
return ret;
|
||||
}
|
||||
ret = rspi_dma_check_then_transfer(rspi, xfer);
|
||||
if (ret != -EAGAIN)
|
||||
return ret;
|
||||
|
||||
ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
|
||||
if (ret < 0)
|
||||
@ -661,12 +724,59 @@ static int rspi_rz_transfer_one(struct spi_master *master,
|
||||
return rspi_common_transfer(rspi, xfer);
|
||||
}
|
||||
|
||||
static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx,
|
||||
u8 *rx, unsigned int len)
|
||||
{
|
||||
unsigned int i, n, ret;
|
||||
int error;
|
||||
|
||||
while (len > 0) {
|
||||
n = qspi_set_send_trigger(rspi, len);
|
||||
qspi_set_receive_trigger(rspi, len);
|
||||
if (n == QSPI_BUFFER_SIZE) {
|
||||
error = rspi_wait_for_tx_empty(rspi);
|
||||
if (error < 0) {
|
||||
dev_err(&rspi->master->dev, "transmit timeout\n");
|
||||
return error;
|
||||
}
|
||||
for (i = 0; i < n; i++)
|
||||
rspi_write_data(rspi, *tx++);
|
||||
|
||||
error = rspi_wait_for_rx_full(rspi);
|
||||
if (error < 0) {
|
||||
dev_err(&rspi->master->dev, "receive timeout\n");
|
||||
return error;
|
||||
}
|
||||
for (i = 0; i < n; i++)
|
||||
*rx++ = rspi_read_data(rspi);
|
||||
} else {
|
||||
ret = rspi_pio_transfer(rspi, tx, rx, n);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
len -= n;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qspi_transfer_out_in(struct rspi_data *rspi,
|
||||
struct spi_transfer *xfer)
|
||||
{
|
||||
int ret;
|
||||
|
||||
qspi_receive_init(rspi);
|
||||
|
||||
return rspi_common_transfer(rspi, xfer);
|
||||
ret = rspi_dma_check_then_transfer(rspi, xfer);
|
||||
if (ret != -EAGAIN)
|
||||
return ret;
|
||||
|
||||
ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf,
|
||||
xfer->rx_buf, xfer->len);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
|
||||
|
Loading…
Reference in New Issue
Block a user