luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tg3: Add EEE support

Browse Source 
This patch adds Energy Efficient Ethernet (EEE) support for the 5718
device ID and the 57765 B0 asic revision.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Matt Carlson 2010-10-14 10:37:41 +00:00 committed by David S. Miller
parent ddfc87bfd1
commit 52b02d04c8
2 changed files with 146 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

114
drivers/net/tg3.c
View File

@ -1584,6 +1584,17 @@ static void tg3_phy_fini(struct tg3 *tp)
}
}
static int tg3_phydsp_read(struct tg3 *tp, u32 reg, u32 *val)
{
int err;
err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
if (!err)
err = tg3_readphy(tp, MII_TG3_DSP_RW_PORT, val);
return err;
}
static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
{
int err;
@ -1747,6 +1758,42 @@ static void tg3_phy_apply_otp(struct tg3 *tp)
tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
}
static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
{
u32 val;
if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
return;
tp->setlpicnt = 0;
if (tp->link_config.autoneg == AUTONEG_ENABLE &&
current_link_up == 1 &&
(tp->link_config.active_speed == SPEED_1000 ||
(tp->link_config.active_speed == SPEED_100 &&
tp->link_config.active_duplex == DUPLEX_FULL))) {
u32 eeectl;
if (tp->link_config.active_speed == SPEED_1000)
eeectl = TG3_CPMU_EEE_CTRL_EXIT_16_5_US;
else
eeectl = TG3_CPMU_EEE_CTRL_EXIT_36_US;
tw32(TG3_CPMU_EEE_CTRL, eeectl);
tg3_phy_cl45_read(tp, 0x7, TG3_CL45_D7_EEERES_STAT, &val);
if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
tp->setlpicnt = 2;
}
if (!tp->setlpicnt) {
val = tr32(TG3_CPMU_EEE_MODE);
tw32(TG3_CPMU_EEE_MODE, val & ~TG3_CPMU_EEEMD_LPI_ENABLE);
}
}
static int tg3_wait_macro_done(struct tg3 *tp)
{
int limit = 100;
@ -2921,6 +2968,44 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
}
if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
u32 val = 0;
tw32(TG3_CPMU_EEE_MODE,
tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
/* Enable SM_DSP clock and tx 6dB coding. */
val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
MII_TG3_AUXCTL_ACTL_TX_6DB;
tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) &&
!tg3_phydsp_read(tp, MII_TG3_DSP_CH34TP2, &val))
tg3_phydsp_write(tp, MII_TG3_DSP_CH34TP2,
val | MII_TG3_DSP_CH34TP2_HIBW01);
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
/* Advertise 100-BaseTX EEE ability */
if (tp->link_config.advertising &
(ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full))
val |= TG3_CL45_D7_EEEADV_CAP_100TX;
/* Advertise 1000-BaseT EEE ability */
if (tp->link_config.advertising &
(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full))
val |= TG3_CL45_D7_EEEADV_CAP_1000T;
}
tg3_phy_cl45_write(tp, 0x7, TG3_CL45_D7_EEEADV_CAP, val);
/* Turn off SM_DSP clock. */
val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
MII_TG3_AUXCTL_ACTL_TX_6DB;
tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
}
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
tp->link_config.speed != SPEED_INVALID) {
u32 bmcr, orig_bmcr;
@ -3282,6 +3367,8 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
tw32_f(MAC_MODE, tp->mac_mode);
udelay(40);
tg3_phy_eee_adjust(tp, current_link_up);
if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
/* Polled via timer. */
tw32_f(MAC_EVENT, 0);
@ -7790,6 +7877,22 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(TG3_CPMU_LSPD_10MB_CLK, val);
}
/* Enable MAC control of LPI */
if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
TG3_CPMU_EEE_LNKIDL_UART_IDL);
tw32_f(TG3_CPMU_EEE_CTRL,
TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
tw32_f(TG3_CPMU_EEE_MODE,
TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
TG3_CPMU_EEEMD_LPI_IN_TX |
TG3_CPMU_EEEMD_LPI_IN_RX |
TG3_CPMU_EEEMD_EEE_ENABLE);
}
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision. But do not set this on PCI Express
@ -8598,6 +8701,12 @@ static void tg3_timer(unsigned long __opaque)
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
tg3_periodic_fetch_stats(tp);
if (tp->setlpicnt && !--tp->setlpicnt) {
u32 val = tr32(TG3_CPMU_EEE_MODE);
tw32(TG3_CPMU_EEE_MODE,
val | TG3_CPMU_EEEMD_LPI_ENABLE);
}
if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
u32 mac_stat;
int phy_event;
@ -12432,6 +12541,11 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
}
}
if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
tp->pci_chip_rev_id != CHIPREV_ID_57765_A0))
tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) &&
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {

33
drivers/net/tg3.h
View File

@ -1091,7 +1091,26 @@
#define CPMU_MUTEX_GNT_DRIVER 0x00001000
#define TG3_CPMU_PHY_STRAP 0x00003664
#define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020
/* 0x3664 --> 0x3800 unused */
/* 0x3664 --> 0x36b0 unused */
#define TG3_CPMU_EEE_MODE 0x000036b0
#define TG3_CPMU_EEEMD_ERLY_L1_XIT_DET 0x00000008
#define TG3_CPMU_EEEMD_LPI_ENABLE 0x00000080
#define TG3_CPMU_EEEMD_LPI_IN_TX 0x00000100
#define TG3_CPMU_EEEMD_LPI_IN_RX 0x00000200
#define TG3_CPMU_EEEMD_EEE_ENABLE 0x00100000
/* 0x36b4 --> 0x36b8 unused */
#define TG3_CPMU_EEE_LNKIDL_CTRL 0x000036bc
#define TG3_CPMU_EEE_LNKIDL_PCIE_NL0 0x01000000
#define TG3_CPMU_EEE_LNKIDL_UART_IDL 0x00000004
/* 0x36c0 --> 0x36d0 unused */
#define TG3_CPMU_EEE_CTRL 0x000036d0
#define TG3_CPMU_EEE_CTRL_EXIT_16_5_US 0x0000019d
#define TG3_CPMU_EEE_CTRL_EXIT_36_US 0x00000384
#define TG3_CPMU_EEE_CTRL_EXIT_20_1_US 0x000001f8
/* 0x36d4 --> 0x3800 unused */
/* Mbuf cluster free registers */
#define MBFREE_MODE 0x00003800
@ -2082,6 +2101,8 @@
#define MII_TG3_DSP_TAP1 0x0001
#define MII_TG3_DSP_TAP1_AGCTGT_DFLT 0x0007
#define MII_TG3_DSP_AADJ1CH0 0x001f
#define MII_TG3_DSP_CH34TP2 0x4022
#define MII_TG3_DSP_CH34TP2_HIBW01 0x0010
#define MII_TG3_DSP_AADJ1CH3 0x601f
#define MII_TG3_DSP_AADJ1CH3_ADCCKADJ 0x0002
#define MII_TG3_DSP_EXP1_INT_STAT 0x0f01
@ -2148,6 +2169,14 @@
#define MII_TG3_TEST1_TRIM_EN 0x0010
#define MII_TG3_TEST1_CRC_EN 0x8000
/* Clause 45 expansion registers */
#define TG3_CL45_D7_EEEADV_CAP 0x003c
#define TG3_CL45_D7_EEEADV_CAP_100TX 0x0002
#define TG3_CL45_D7_EEEADV_CAP_1000T 0x0004
#define TG3_CL45_D7_EEERES_STAT 0x803e
#define TG3_CL45_D7_EEERES_STAT_LP_100TX 0x0002
#define TG3_CL45_D7_EEERES_STAT_LP_1000T 0x0004
/* Fast Ethernet Tranceiver definitions */
#define MII_TG3_FET_PTEST 0x17
@ -2992,9 +3021,11 @@ struct tg3 {
#define TG3_PHYFLG_BER_BUG 0x00008000
#define TG3_PHYFLG_SERDES_PREEMPHASIS 0x00010000
#define TG3_PHYFLG_PARALLEL_DETECT 0x00020000
#define TG3_PHYFLG_EEE_CAP 0x00040000
u32 led_ctrl;
u32 phy_otp;
u32 setlpicnt;
#define TG3_BPN_SIZE 24
char board_part_number[TG3_BPN_SIZE];