mac80211: restrict peer's VHT capabilities to own
Implement restricting peer VHT capabilities to the device's own capabilities. This is useful when a single driver supports more than one device and the devices have different capabilities (often they will differ in the number of spatial streams), but in particular is also necessary for VHT capability overrides to work correctly -- otherwise it'd be possible to e.g. advertise, due to overrides, that TX-STBC is not supported, but then still use it to TX to the AP because it supports RX-STBC. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit is contained in:
Johannes Berg
parent
c07270b605
commit
55d942f424
@ -1333,10 +1333,11 @@ struct ieee80211_vht_operation {
|
||||
#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200
|
||||
#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
|
||||
#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
|
||||
#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700
|
||||
#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800
|
||||
#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000
|
||||
#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000
|
||||
#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000
|
||||
#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX 0x00030000
|
||||
#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000
|
||||
#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000
|
||||
#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000
|
||||
|
||||
@ -1228,9 +1228,8 @@ enum ieee80211_sta_rx_bandwidth {
|
||||
* @addr: MAC address
|
||||
* @aid: AID we assigned to the station if we're an AP
|
||||
* @supp_rates: Bitmap of supported rates (per band)
|
||||
* @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities
|
||||
* @vht_cap: VHT capabilities of this STA; Not restricting any capabilities
|
||||
* of remote STA. Taking as is.
|
||||
* @ht_cap: HT capabilities of this STA; restricted to our own capabilities
|
||||
* @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
|
||||
* @wme: indicates whether the STA supports WME. Only valid during AP-mode.
|
||||
* @drv_priv: data area for driver use, will always be aligned to
|
||||
* sizeof(void *), size is determined in hw information.
|
||||
|
||||
@ -118,6 +118,8 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
|
||||
struct sta_info *sta)
|
||||
{
|
||||
struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap;
|
||||
struct ieee80211_sta_vht_cap own_cap;
|
||||
u32 cap_info, i;
|
||||
|
||||
memset(vht_cap, 0, sizeof(*vht_cap));
|
||||
|
||||
@ -133,12 +135,122 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
|
||||
|
||||
vht_cap->vht_supported = true;
|
||||
|
||||
vht_cap->cap = le32_to_cpu(vht_cap_ie->vht_cap_info);
|
||||
own_cap = sband->vht_cap;
|
||||
/*
|
||||
* If user has specified capability overrides, take care
|
||||
* of that if the station we're setting up is the AP that
|
||||
* we advertised a restricted capability set to. Override
|
||||
* our own capabilities and then use those below.
|
||||
*/
|
||||
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
|
||||
!test_sta_flag(sta, WLAN_STA_TDLS_PEER))
|
||||
ieee80211_apply_vhtcap_overrides(sdata, &own_cap);
|
||||
|
||||
/* take some capabilities as-is */
|
||||
cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info);
|
||||
vht_cap->cap = cap_info;
|
||||
vht_cap->cap &= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 |
|
||||
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
|
||||
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
|
||||
IEEE80211_VHT_CAP_RXLDPC |
|
||||
IEEE80211_VHT_CAP_VHT_TXOP_PS |
|
||||
IEEE80211_VHT_CAP_HTC_VHT |
|
||||
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK |
|
||||
IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB |
|
||||
IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB |
|
||||
IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
|
||||
IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
|
||||
|
||||
/* and some based on our own capabilities */
|
||||
switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
|
||||
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
|
||||
vht_cap->cap |= cap_info &
|
||||
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
|
||||
break;
|
||||
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
|
||||
vht_cap->cap |= cap_info &
|
||||
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
|
||||
break;
|
||||
default:
|
||||
/* nothing */
|
||||
break;
|
||||
}
|
||||
|
||||
/* symmetric capabilities */
|
||||
vht_cap->cap |= cap_info & own_cap.cap &
|
||||
(IEEE80211_VHT_CAP_SHORT_GI_80 |
|
||||
IEEE80211_VHT_CAP_SHORT_GI_160);
|
||||
|
||||
/* remaining ones */
|
||||
if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) {
|
||||
vht_cap->cap |= cap_info &
|
||||
(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
|
||||
IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX |
|
||||
IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX);
|
||||
}
|
||||
|
||||
if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
|
||||
vht_cap->cap |= cap_info &
|
||||
IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
|
||||
|
||||
if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
|
||||
vht_cap->cap |= cap_info &
|
||||
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
|
||||
|
||||
if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
|
||||
vht_cap->cap |= cap_info &
|
||||
IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE;
|
||||
|
||||
if (own_cap.cap & IEEE80211_VHT_CAP_TXSTBC)
|
||||
vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_RXSTBC_MASK;
|
||||
|
||||
if (own_cap.cap & IEEE80211_VHT_CAP_RXSTBC_MASK)
|
||||
vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_TXSTBC;
|
||||
|
||||
/* Copy peer MCS info, the driver might need them. */
|
||||
memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs,
|
||||
sizeof(struct ieee80211_vht_mcs_info));
|
||||
|
||||
/* but also restrict MCSes */
|
||||
for (i = 0; i < 8; i++) {
|
||||
u16 own_rx, own_tx, peer_rx, peer_tx;
|
||||
|
||||
own_rx = le16_to_cpu(own_cap.vht_mcs.rx_mcs_map);
|
||||
own_rx = (own_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
||||
|
||||
own_tx = le16_to_cpu(own_cap.vht_mcs.tx_mcs_map);
|
||||
own_tx = (own_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
||||
|
||||
peer_rx = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
|
||||
peer_rx = (peer_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
||||
|
||||
peer_tx = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
|
||||
peer_tx = (peer_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
||||
|
||||
if (peer_tx != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
|
||||
if (own_rx == IEEE80211_VHT_MCS_NOT_SUPPORTED)
|
||||
peer_tx = IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
||||
else if (own_rx < peer_tx)
|
||||
peer_tx = own_rx;
|
||||
}
|
||||
|
||||
if (peer_rx != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
|
||||
if (own_tx == IEEE80211_VHT_MCS_NOT_SUPPORTED)
|
||||
peer_rx = IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
||||
else if (own_tx < peer_rx)
|
||||
peer_rx = own_tx;
|
||||
}
|
||||
|
||||
vht_cap->vht_mcs.rx_mcs_map &=
|
||||
~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2);
|
||||
vht_cap->vht_mcs.rx_mcs_map |= cpu_to_le16(peer_rx << i * 2);
|
||||
|
||||
vht_cap->vht_mcs.tx_mcs_map &=
|
||||
~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2);
|
||||
vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2);
|
||||
}
|
||||
|
||||
/* finally set up the bandwidth */
|
||||
switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
|
||||
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
|
||||
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
|
||||
|
||||
Loading…
Reference in New Issue
Block a user