luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fec: add support for PHY interface platform data

Browse Source 
The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds
the ability to configure RMII, based on platform data.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by:  Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Baruch Siach 2010-05-24 00:36:13 -07:00 committed by David S. Miller
parent 8286274284
commit 5eb32bd059
3 changed files with 45 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/net/fec.c
View File

@ -41,6 +41,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/fec.h>
#include <asm/cacheflush.h>
@ -182,6 +183,7 @@ struct fec_enet_private {
struct phy_device *phy_dev;
int mii_timeout;
uint phy_speed;
phy_interface_t phy_interface;
int index;
int link;
int full_duplex;
@ -1191,6 +1193,21 @@ fec_restart(struct net_device *dev, int duplex)
/* Set MII speed */
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
#ifdef FEC_MIIGSK_ENR
if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
/* disable the gasket and wait */
writel(0, fep->hwp + FEC_MIIGSK_ENR);
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
udelay(1);
/* configure the gasket: RMII, 50 MHz, no loopback, no echo */
writel(1, fep->hwp + FEC_MIIGSK_CFGR);
/* re-enable the gasket */
writel(2, fep->hwp + FEC_MIIGSK_ENR);
}
#endif
/* And last, enable the transmit and receive processing */
writel(2, fep->hwp + FEC_ECNTRL);
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
@ -1226,6 +1243,7 @@ static int __devinit
fec_probe(struct platform_device *pdev)
{
struct fec_enet_private *fep;
struct fec_platform_data *pdata;
struct net_device *ndev;
int i, irq, ret = 0;
struct resource *r;
@ -1259,6 +1277,10 @@ fec_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ndev);
pdata = pdev->dev.platform_data;
if (pdata)
fep->phy_interface = pdata->phy;
/* This device has up to three irqs on some platforms */
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);

2
drivers/net/fec.h
View File

@ -43,6 +43,8 @@
#define FEC_R_DES_START 0x180 /* Receive descriptor ring */
#define FEC_X_DES_START 0x184 /* Transmit descriptor ring */
#define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */
#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */
#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */
#else

21
include/linux/fec.h Normal file
View File

@ -0,0 +1,21 @@
/* include/linux/fec.h
*
* Copyright (c) 2009 Orex Computed Radiography
* Baruch Siach <baruch@tkos.co.il>
*
* Header file for the FEC platform data
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_FEC_H__
#define __LINUX_FEC_H__
#include <linux/phy.h>
struct fec_platform_data {
phy_interface_t phy;
};
#endif