spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings
Added device tree bindings documentation for BRCMSTB, NSP, NS2 iProc SoCs supported by spi-bcm-qspi, spi-brcmstb-qspi and spi-iproc-qspi driver. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Kamal Dasu
Mark Brown
parent
29b4817d40
commit
5fc78f4c84
233
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
Normal file
233
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
Normal file
|
|
@ -0,0 +1,233 @@
|
|||
Broadcom SPI controller
|
||||
|
||||
The Broadcom SPI controller is a SPI master found on various SOCs, including
|
||||
BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
|
||||
of :
|
||||
MSPI : SPI master controller can read and write to a SPI slave device
|
||||
BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
|
||||
for flash reads and be configured to do single, double, quad lane
|
||||
io with 3-byte and 4-byte addressing support.
|
||||
|
||||
Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
|
||||
MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
|
||||
of a MSPI master without the BSPI to use with non flash slave devices that
|
||||
use SPI protocol.
|
||||
|
||||
Required properties:
|
||||
|
||||
- #address-cells:
|
||||
Must be <1>, as required by generic SPI binding.
|
||||
|
||||
- #size-cells:
|
||||
Must be <0>, also as required by generic SPI binding.
|
||||
|
||||
- compatible:
|
||||
Must be one of :
|
||||
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
|
||||
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP
|
||||
"brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs
|
||||
|
||||
- reg:
|
||||
Define the bases and ranges of the associated I/O address spaces.
|
||||
The required range is MSPI controller registers.
|
||||
|
||||
- reg-names:
|
||||
First name does not matter, but must be reserved for the MSPI controller
|
||||
register range as mentioned in 'reg' above, and will typically contain
|
||||
- "bspi_regs": BSPI register range, not required with compatible
|
||||
"spi-brcmstb-mspi"
|
||||
- "mspi_regs": MSPI register range is required for compatible strings
|
||||
- "intr_regs", "intr_status_reg" : Interrupt and status register for
|
||||
NSP, NS2, Cygnus SoC
|
||||
|
||||
- interrupts
|
||||
The interrupts used by the MSPI and/or BSPI controller.
|
||||
|
||||
- interrupt-names:
|
||||
Names of interrupts associated with MSPI
|
||||
- "mspi_halted" :
|
||||
- "mspi_done": Indicates that the requested SPI operation is complete.
|
||||
- "spi_lr_fullness_reached" : Linear read BSPI pipe full
|
||||
- "spi_lr_session_aborted" : Linear read BSPI pipe aborted
|
||||
- "spi_lr_impatient" : Linear read BSPI requested when pipe empty
|
||||
- "spi_lr_session_done" : Linear read BSPI session done
|
||||
|
||||
- clocks:
|
||||
A phandle to the reference clock for this block.
|
||||
|
||||
Optional properties:
|
||||
|
||||
|
||||
- native-endian
|
||||
Defined when using BE SoC and device uses BE register read/write
|
||||
|
||||
Recommended optional m25p80 properties:
|
||||
- spi-rx-bus-width: Definition as per
|
||||
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
|
||||
Examples:
|
||||
|
||||
BRCMSTB SoC Example:
|
||||
|
||||
SPI Master (MSPI+BSPI) for SPI-NOR access:
|
||||
|
||||
spi@f03e3400 {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
|
||||
reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
|
||||
reg-names = "cs_reg", "mspi", "bspi";
|
||||
interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
|
||||
interrupt-parent = <0x1c>;
|
||||
interrupt-names = "mspi_halted",
|
||||
"mspi_done",
|
||||
"spi_lr_overread",
|
||||
"spi_lr_session_done",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_fullness_reached";
|
||||
|
||||
clocks = <&hif_spi>;
|
||||
clock-names = "sw_spi";
|
||||
|
||||
m25p80@0 {
|
||||
#size-cells = <0x2>;
|
||||
#address-cells = <0x2>;
|
||||
compatible = "m25p80";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <0x2625a00>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
flash0.bolt@0 {
|
||||
reg = <0x0 0x0 0x0 0x100000>;
|
||||
};
|
||||
|
||||
flash0.macadr@100000 {
|
||||
reg = <0x0 0x100000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
flash0.nvram@110000 {
|
||||
reg = <0x0 0x110000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
flash0.kernel@120000 {
|
||||
reg = <0x0 0x120000 0x0 0x400000>;
|
||||
};
|
||||
|
||||
flash0.devtree@520000 {
|
||||
reg = <0x0 0x520000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
flash0.splash@530000 {
|
||||
reg = <0x0 0x530000 0x0 0x80000>;
|
||||
};
|
||||
|
||||
flash0@0 {
|
||||
reg = <0x0 0x0 0x0 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
MSPI master for any SPI device :
|
||||
|
||||
spi@f0416000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&upg_fixed>;
|
||||
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
|
||||
reg = <0xf0416000 0x180>;
|
||||
reg-names = "mspi";
|
||||
interrupts = <0x14>;
|
||||
interrupt-parent = <&irq0_aon_intc>;
|
||||
interrupt-names = "mspi_done";
|
||||
};
|
||||
|
||||
iProc SoC Example:
|
||||
|
||||
qspi: spi@18027200 {
|
||||
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
|
||||
reg = <0x18027200 0x184>,
|
||||
<0x18027000 0x124>,
|
||||
<0x1811c408 0x004>,
|
||||
<0x180273a0 0x01c>;
|
||||
reg-names = "mspi_regs", "bspi_regs", "intr_regs", "intr_status_reg";
|
||||
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names =
|
||||
"spi_lr_fullness_reached",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_done",
|
||||
"mspi_done",
|
||||
"mspi_halted";
|
||||
clocks = <&iprocmed>;
|
||||
clock-names = "iprocmed";
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
|
||||
NS2 SoC Example:
|
||||
|
||||
qspi: spi@66470200 {
|
||||
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
|
||||
reg = <0x66470200 0x184>,
|
||||
<0x66470000 0x124>,
|
||||
<0x67017408 0x004>,
|
||||
<0x664703a0 0x01c>;
|
||||
reg-names = "mspi", "bspi", "intr_regs",
|
||||
"intr_status_reg";
|
||||
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "spi_l1_intr";
|
||||
clocks = <&iprocmed>;
|
||||
clock-names = "iprocmed";
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
|
||||
m25p80 node for NSP, NS2
|
||||
|
||||
&qspi {
|
||||
flash: m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p80";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <12500000>;
|
||||
m25p,fast-read;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x00000000 0x000a0000>;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "env";
|
||||
reg = <0x000a0000 0x00060000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "system";
|
||||
reg = <0x00100000 0x00600000>;
|
||||
};
|
||||
|
||||
partition@700000 {
|
||||
label = "rootfs";
|
||||
reg = <0x00700000 0x01900000>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user