luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

libahci: fix result_tf handling after an ATA PIO data-in command

Browse Source 
ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in
command.  The host is supposed to take the TF and E_Status of the
preceding PIO Setup FIS.  Update ahci_qc_fill_rtf() such that it takes
TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in
command.

Without this patch, result_tf for such a command is filled with the
content of the previous D2H Reg FIS which belongs to a previous
command, which can make the command incorrectly seen as failed.

* Patch updated to grab the whole TF + E_Status from PIO Setup FIS
  instead of just E_Status as suggested by Robert Hancock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mark Lord <kernel@teksavvy.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Tejun Heo 2010-10-15 11:00:08 +02:00 committed by Jeff Garzik
parent f7a437dda2
commit 6ad6019553
2 changed files with 16 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/ata/ahci.h
View File

@ -72,6 +72,7 @@ enum {
AHCI_CMD_RESET = (1 << 8),
AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */

18
drivers/ata/libahci.c
View File

@ -1752,12 +1752,24 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct ahci_port_priv *pp = qc->ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
u8 *rx_fis = pp->rx_fis;
if (pp->fbs_enabled)
d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
/*
* After a successful execution of an ATA PIO data-in command,
* the device doesn't send D2H Reg FIS to update the TF and
* the host should take TF and E_Status from the preceding PIO
* Setup FIS.
*/
if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
!(qc->flags & ATA_QCFLAG_FAILED)) {
ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
} else
ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
ata_tf_from_fis(d2h_fis, &qc->result_tf);
return true;
}