From 312f7da2824c82800ee78d6190f12854456957af Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:38:03 +0800 Subject: [PATCH 001/258] [PATCH] libata: interrupt driven pio for libata-core - add PIO_ST_FIRST for the state before sending ATAPI CDB or sending "ATA PIO data out" first data block. - add ATA_TFLAG_POLLING and ATA_DFLAG_CDB_INTR flags - remove the ATA_FLAG_NOINTR flag since the interrupt handler is now aware of the states - modify ata_pio_sector() and atapi_pio_bytes() to work in the interrupt context - modify the ata_host_intr() to handle PIO interrupts - modify ata_qc_issue_prot() to initialize states - atapi_packet_task() changed to handle "ATA PIO data out" first data block - support the pre-ATA4 ATAPI device which raise interrupt when ready to receive CDB Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 333 +++++++++++++++++++++++++++++-------- include/linux/ata.h | 3 + include/linux/libata.h | 4 +- 3 files changed, 271 insertions(+), 69 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c4fcdc30f18c..cc2d1308826e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1292,6 +1292,9 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) ap->cdb_len = (unsigned int) rc; ap->host->max_cmd_len = (unsigned char) ap->cdb_len; + if (ata_id_cdb_intr(dev->id)) + dev->flags |= ATA_DFLAG_CDB_INTR; + /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", ap->id, device, @@ -2405,7 +2408,6 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) unsigned long flags; spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; ata_irq_on(ap); ata_qc_complete(qc, drv_stat); spin_unlock_irqrestore(&ap->host_set->lock, flags); @@ -2660,6 +2662,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) struct page *page; unsigned int offset; unsigned char *buf; + unsigned long flags; if (qc->cursect == (qc->nsect - 1)) ap->hsm_task_state = HSM_ST_LAST; @@ -2671,7 +2674,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - buf = kmap(page) + offset; + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0) + offset; qc->cursect++; qc->cursg_ofs++; @@ -2687,7 +2691,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) do_write = (qc->tf.flags & ATA_TFLAG_WRITE); ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write); - kunmap(page); + kunmap_atomic(buf - offset, KM_IRQ0); + local_irq_restore(flags); } /** @@ -2710,6 +2715,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) struct page *page; unsigned char *buf; unsigned int offset, count; + unsigned long flags; if (qc->curbytes + bytes >= qc->nbytes) ap->hsm_task_state = HSM_ST_LAST; @@ -2753,7 +2759,8 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); - buf = kmap(page) + offset; + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0) + offset; bytes -= count; qc->curbytes += count; @@ -2769,7 +2776,8 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) /* do the actual data transfer */ ata_data_xfer(ap, buf, count, do_write); - kunmap(page); + kunmap_atomic(buf - offset, KM_IRQ0); + local_irq_restore(flags); if (bytes) goto next_sg; @@ -2808,6 +2816,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (do_write != i_write) goto err_out; + VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); + __atapi_pio_bytes(qc, bytes); return; @@ -3054,6 +3064,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", ap->id, qc->tf.command, drv_stat, host_stat); + ap->hsm_task_state = HSM_ST_IDLE; + /* complete taskfile transaction */ ata_qc_complete(qc, drv_stat); break; @@ -3344,43 +3356,96 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + /* select the device */ ata_dev_select(ap, qc->dev->devno, 1, 0); + /* start the command */ switch (qc->tf.protocol) { case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host_nolock(ap, &qc->tf); + ap->hsm_task_state = HSM_ST_LAST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); + break; case ATA_PROT_DMA: + assert(!(qc->tf.flags & ATA_TFLAG_POLLING)); + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; break; - case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ - ata_qc_set_polling(qc); + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host_nolock(ap, &qc->tf); - ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); + + if (qc->tf.flags & ATA_TFLAG_POLLING) { + /* polling PIO */ + ap->hsm_task_state = HSM_ST; + queue_work(ata_wq, &ap->pio_task); + } else { + /* interrupt driven PIO */ + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + queue_work(ata_wq, &ap->packet_task); + + /* send first data block by polling */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; + + /* interrupt handler takes over from here */ + } + } + break; case ATA_PROT_ATAPI: - ata_qc_set_polling(qc); + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host_nolock(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + queue_work(ata_wq, &ap->packet_task); break; case ATA_PROT_ATAPI_NODATA: - ap->flags |= ATA_FLAG_NOINTR; + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host_nolock(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + queue_work(ata_wq, &ap->packet_task); break; case ATA_PROT_ATAPI_DMA: - ap->flags |= ATA_FLAG_NOINTR; + assert(!(qc->tf.flags & ATA_TFLAG_POLLING)); + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - queue_work(ata_wq, &ap->packet_task); + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + queue_work(ata_wq, &ap->packet_task); break; default: @@ -3622,6 +3687,42 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) ata_altstatus(ap); /* dummy read */ } +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + assert(ap->cdb_len >= 12); + + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + /** * ata_host_intr - Handle host interrupt for given (port, task) * @ap: Port on which interrupt arrived (possibly...) @@ -3641,47 +3742,142 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) inline unsigned int ata_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc) { - u8 status, host_stat; + u8 status, host_stat = 0; - switch (qc->tf.protocol) { + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->id, qc->tf.protocol, ap->hsm_task_state); - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI: - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto idle_irq; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; - /* fall through */ + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + } + break; + case HSM_ST: + break; + default: + goto idle_irq; + } - case ATA_PROT_ATAPI_NODATA: - case ATA_PROT_NODATA: - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; + /* check altstatus */ + status = ata_altstatus(ap); + if (status & ATA_BUSY) + goto idle_irq; - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto idle_irq; - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, ap->hsm_task_state, status); + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + /* check error */ + if (unlikely((status & ATA_ERR) || (host_stat & ATA_DMA_ERR))) + ap->hsm_task_state = HSM_ST_ERR; + +fsm_start: + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* check device status */ + if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { + /* Wrong status. Let EH handle this */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_send_cdb(ap, qc); + + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATA_PROT_ATAPI) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* no more data to transfer */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sector(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + ata_altstatus(ap); + status = ata_chk_status(ap); + goto fsm_start; + } + } + + ata_altstatus(ap); /* flush */ + break; + + case HSM_ST_LAST: + if (unlikely(status & ATA_DRQ)) { + /* handle DRQ=1 as error */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: command complete, drv_stat 0x%x\n", + ap->id, status); + + ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ ata_qc_complete(qc, status); break; + case HSM_ST_ERR: + printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", + ap->id, status, host_stat); + + ap->hsm_task_state = HSM_ST_IDLE; + ata_qc_complete(qc, status | ATA_ERR); + break; default: goto idle_irq; } @@ -3733,11 +3929,11 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN)) && + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); } @@ -3767,6 +3963,7 @@ static void atapi_packet_task(void *_data) struct ata_port *ap = _data; struct ata_queued_cmd *qc; u8 status; + unsigned long flags; qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); @@ -3782,38 +3979,40 @@ static void atapi_packet_task(void *_data) if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) goto err_out; - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; + if (is_atapi_taskfile(&qc->tf)) { + /* send CDB */ + atapi_send_cdb(ap, qc); - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); } else { - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + /* PIO data out protocol. + * send first data block. + */ - /* PIO commands are handled by polling */ + /* ata_pio_sector() might change the state to HSM_ST_LAST. + * so, the state is changed here before ata_pio_sector(). + */ ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); + ata_pio_sector(qc); + ata_altstatus(ap); /* flush */ + + /* interrupt handler takes over from here */ } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + return; err_out: - ata_poll_qc_complete(qc, ATA_ERR); + ata_pio_error(ap); } diff --git a/include/linux/ata.h b/include/linux/ata.h index a5b74efab067..6fec2f6f2d59 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -181,6 +181,7 @@ enum { ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ + ATA_TFLAG_POLLING = (1 << 4), /* set nIEN to 1 and use polling */ }; enum ata_tf_protocols { @@ -250,6 +251,8 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) + static inline int atapi_cdb_len(u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; diff --git a/include/linux/libata.h b/include/linux/libata.h index bb2d916bce44..9ac2b69df3c1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -97,6 +97,7 @@ enum { ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */ + ATA_DFLAG_CDB_INTR = (1 << 3), /* device asserts INTRQ when ready for CDB */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -115,8 +116,6 @@ enum { ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */ ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */ ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ - ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once - * proper HSM is in place. */ ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ @@ -165,6 +164,7 @@ enum hsm_task_states { HSM_ST_LAST, HSM_ST_LAST_POLL, HSM_ST_ERR, + HSM_ST_FIRST, }; /* forward declarations */ From e50362eccd8809a224cda5f71714a088ba37b2ab Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:39:50 +0800 Subject: [PATCH 002/258] [PATCH] libata: interrupt driven pio for LLD libata.h: libata-core: Add ATA_FLAG_PIO_POLLING flag for LLDs that expect interrupt for command completion only. sata_nv.c: sata_vsc.c: irq handler is wrapper around ata_host_intr(), can handle PIO interrupts. sata_promise.c: sata_sx4.c: sata_qstor.c: sata_mv.c: Private irq handler. Polling mode ATA_FLAG_PIO_POLLING used for compatibility. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 19 +++++++++++++++++++ drivers/scsi/sata_mv.c | 7 +++++-- drivers/scsi/sata_nv.c | 4 ++-- drivers/scsi/sata_promise.c | 13 ++++++++----- drivers/scsi/sata_qstor.c | 11 +++++------ drivers/scsi/sata_sx4.c | 7 ++++--- drivers/scsi/sata_vsc.c | 6 +++--- include/linux/libata.h | 2 ++ 8 files changed, 48 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cc2d1308826e..f8a590e59f10 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3356,6 +3356,25 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + case ATA_PROT_ATAPI_DMA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + BUG(); + break; + default: + break; + } + } + /* select the device */ ata_dev_select(ap, qc->dev->devno, 1, 0); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ea76fe44585e..b8f1f6963179 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -241,7 +241,8 @@ static struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING), .pio_mask = 0x1f, /* pio4-0 */ .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ .port_ops = &mv_ops, @@ -250,7 +251,7 @@ static struct ata_port_info mv_port_info[] = { .sht = &mv_sht, .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_DUAL_HC), + ATA_FLAG_PIO_POLLING | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio4-0 */ .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ .port_ops = &mv_ops, @@ -259,6 +260,7 @@ static struct ata_port_info mv_port_info[] = { .sht = &mv_sht, .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING | MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), .pio_mask = 0x1f, /* pio4-0 */ .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ @@ -268,6 +270,7 @@ static struct ata_port_info mv_port_info[] = { .sht = &mv_sht, .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING | MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | MV_FLAG_BDMA), .pio_mask = 0x1f, /* pio4-0 */ diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index c05653c7779d..8b7e871ea0bf 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -304,11 +304,11 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index def7e0d9dacb..f67deb0a55c9 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -162,7 +162,8 @@ static struct ata_port_info pdc_port_info[] = { { .sht = &pdc_ata_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, + ATA_FLAG_SRST | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -173,7 +174,8 @@ static struct ata_port_info pdc_port_info[] = { { .sht = &pdc_ata_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, + ATA_FLAG_SRST | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -184,7 +186,8 @@ static struct ata_port_info pdc_port_info[] = { { .sht = &pdc_ata_sht, .host_flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS, + ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -493,11 +496,11 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r ap = host_set->ports[i]; tmp = mask & (1 << (i + 1)); if (tmp && ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += pdc_host_intr(ap, qc); } } diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index ffcdeb68641c..a604afafaecc 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -175,7 +175,7 @@ static struct ata_port_info qs_port_info[] = { .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | //FIXME ATA_FLAG_SRST | - ATA_FLAG_MMIO, + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, .pio_mask = 0x10, /* pio4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &qs_ata_ops, @@ -389,14 +389,13 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", sff1, sff0, port_no, sHST, sDST); handled = 1; - if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_pkt) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { switch (sHST) { case 0: /* sucessful CPB */ case 3: /* device error */ @@ -422,13 +421,13 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) struct ata_port *ap; ap = host_set->ports[port_no]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_mmio) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { /* check main status, clearing INTRQ */ u8 status = ata_chk_status(ap); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 540a85191172..a9f9f7685a59 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -219,7 +219,8 @@ static struct ata_port_info pdc_port_info[] = { { .sht = &pdc_sata_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, + ATA_FLAG_SRST | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -832,11 +833,11 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); if (tmp && ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += pdc20621_host_intr(ap, qc, (i > 4), mmio_base); } diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cf94e0158a8d..92378d768c86 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -193,12 +193,12 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct ata_port *ap; ap = host_set->ports[i]; - if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + if (ap && + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); } } diff --git a/include/linux/libata.h b/include/linux/libata.h index 9ac2b69df3c1..ea8ab29aa92e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -116,6 +116,8 @@ enum { ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */ ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */ ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ + ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD + * doesn't handle PIO interrupts */ ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ From c56b14d2a3e32695e13cd49b417da889da744d1c Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 30 Sep 2005 19:07:39 +0800 Subject: [PATCH 003/258] [PATCH] libata irq-pio: add comments and cleanup Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 12 ------------ include/linux/libata.h | 19 ++++++++++--------- 2 files changed, 10 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f8a590e59f10..617836a313f0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3430,18 +3430,6 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host_nolock(ap, &qc->tf); - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || - (qc->tf.flags & ATA_TFLAG_POLLING)) - queue_work(ata_wq, &ap->packet_task); - break; - case ATA_PROT_ATAPI_NODATA: if (qc->tf.flags & ATA_TFLAG_POLLING) ata_qc_set_polling(qc); diff --git a/include/linux/libata.h b/include/linux/libata.h index ea8ab29aa92e..1fcd0ef9e1c9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -158,15 +158,16 @@ enum { }; enum hsm_task_states { - HSM_ST_UNKNOWN, - HSM_ST_IDLE, - HSM_ST_POLL, - HSM_ST_TMOUT, - HSM_ST, - HSM_ST_LAST, - HSM_ST_LAST_POLL, - HSM_ST_ERR, - HSM_ST_FIRST, + HSM_ST_UNKNOWN, /* state unknown */ + HSM_ST_IDLE, /* no command on going */ + HSM_ST_POLL, /* same as HSM_ST, waits longer */ + HSM_ST_TMOUT, /* timeout */ + HSM_ST, /* (waiting the device to) transfer data */ + HSM_ST_LAST, /* (waiting the device to) complete command */ + HSM_ST_LAST_POLL, /* same as HSM_ST_LAST, waits longer */ + HSM_ST_ERR, /* error */ + HSM_ST_FIRST, /* (waiting the device to) + write CDB or first data block */ }; /* forward declarations */ From f9997be974be40e884e9e8157ded2f2f9aed454c Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 30 Sep 2005 19:09:31 +0800 Subject: [PATCH 004/258] [PATCH] libata irq-pio: rename atapi_packet_task() and comments Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 25 +++++++++++++------------ include/linux/libata.h | 6 +++--- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 617836a313f0..a63758da4892 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3416,7 +3416,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - queue_work(ata_wq, &ap->packet_task); + queue_work(ata_wq, &ap->dataout_task); /* send first data block by polling */ } else { @@ -3440,7 +3440,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - queue_work(ata_wq, &ap->packet_task); + queue_work(ata_wq, &ap->dataout_task); break; case ATA_PROT_ATAPI_DMA: @@ -3452,7 +3452,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - queue_work(ata_wq, &ap->packet_task); + queue_work(ata_wq, &ap->dataout_task); break; default: @@ -3952,20 +3952,21 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) } /** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. + * ata_dataout_task - Write first data block to hardware + * @_data: Port to which ATA/ATAPI device is attached. * * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. + * the data, this function sends out the CDB or + * the first data block by PIO. + * After this, + * - If polling, ata_pio_task() handles the rest. + * - Otherwise, interrupt handler takes over. * * LOCKING: * Kernel thread context (may sleep) */ -static void atapi_packet_task(void *_data) +static void ata_dataout_task(void *_data) { struct ata_port *ap = _data; struct ata_queued_cmd *qc; @@ -3978,7 +3979,7 @@ static void atapi_packet_task(void *_data) /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) + if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) goto err_out; /* make sure DRQ is set */ @@ -4141,7 +4142,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; - INIT_WORK(&ap->packet_task, atapi_packet_task, ap); + INIT_WORK(&ap->dataout_task, ata_dataout_task, ap); INIT_WORK(&ap->pio_task, ata_pio_task, ap); for (i = 0; i < ATA_MAX_DEVICES; i++) diff --git a/include/linux/libata.h b/include/linux/libata.h index 1fcd0ef9e1c9..7e6feb97406e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -129,8 +129,8 @@ enum { ATA_TMOUT_PIO = 30 * HZ, ATA_TMOUT_BOOT = 30 * HZ, /* hueristic */ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* hueristic */ - ATA_TMOUT_CDB = 30 * HZ, - ATA_TMOUT_CDB_QUICK = 5 * HZ, + ATA_TMOUT_DATAOUT = 30 * HZ, + ATA_TMOUT_DATAOUT_QUICK = 5 * HZ, /* ATA bus states */ BUS_UNKNOWN = 0, @@ -319,7 +319,7 @@ struct ata_port { struct ata_host_stats stats; struct ata_host_set *host_set; - struct work_struct packet_task; + struct work_struct dataout_task; struct work_struct pio_task; unsigned int hsm_task_state; From 86a7397cda08a65bc4f306e812c846e2437b5347 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 30 Sep 2005 19:11:35 +0800 Subject: [PATCH 005/258] [PATCH] libata irq-pio: simplify if condition in ata_dataout_task() - Use if (qc->tf.protocol == ATA_PROT_PIO) instead of if(is_atapi_taskfile()) in ata_dataout_task() Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a63758da4892..cf5a138cdde5 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3994,13 +3994,7 @@ static void ata_dataout_task(void *_data) */ spin_lock_irqsave(&ap->host_set->lock, flags); - if (is_atapi_taskfile(&qc->tf)) { - /* send CDB */ - atapi_send_cdb(ap, qc); - - if (qc->tf.flags & ATA_TFLAG_POLLING) - queue_work(ata_wq, &ap->pio_task); - } else { + if (qc->tf.protocol == ATA_PROT_PIO) { /* PIO data out protocol. * send first data block. */ @@ -4013,6 +4007,12 @@ static void ata_dataout_task(void *_data) ata_altstatus(ap); /* flush */ /* interrupt handler takes over from here */ + } else { + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); } spin_unlock_irqrestore(&ap->host_set->lock, flags); From 54f00389563c80fa1de250a21256313ba01ca07d Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 30 Sep 2005 19:14:19 +0800 Subject: [PATCH 006/258] [PATCH] libata irq-pio: cleanup ata_qc_issue_prot() ata_qc_issue_prot(): - cleanup and let the PIO data out case always go through the ata_dataout_task() codepath. (Previously for PIO data out case, 2 code pathes were used - irq case goes through ata_data_out_task() codepath. - polling case jumps over the HSM_ST_FIRST state and goes to HSM_ST and ata_pio_task() directly.) ata_dataout_task(): - rearrange the queue_work() code to handle the PIO data out + polling case. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 42 +++++++++++++++++++------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cf5a138cdde5..02a7a9eb464d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3407,24 +3407,24 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_tf_to_host_nolock(ap, &qc->tf); - if (qc->tf.flags & ATA_TFLAG_POLLING) { - /* polling PIO */ - ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + queue_work(ata_wq, &ap->dataout_task); + + /* always send first data block using + * the ata_dataout_task() codepath. + */ } else { - /* interrupt driven PIO */ - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* PIO data out protocol */ - ap->hsm_task_state = HSM_ST_FIRST; - queue_work(ata_wq, &ap->dataout_task); + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; - /* send first data block by polling */ - } else { - /* PIO data in protocol */ - ap->hsm_task_state = HSM_ST; + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); - /* interrupt handler takes over from here */ - } + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ } break; @@ -4005,15 +4005,15 @@ static void ata_dataout_task(void *_data) ap->hsm_task_state = HSM_ST; ata_pio_sector(qc); ata_altstatus(ap); /* flush */ - - /* interrupt handler takes over from here */ - } else { + } else /* send CDB */ atapi_send_cdb(ap, qc); - if (qc->tf.flags & ATA_TFLAG_POLLING) - queue_work(ata_wq, &ap->pio_task); - } + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); spin_unlock_irqrestore(&ap->host_set->lock, flags); From c71c18576d0d8aa4db876c737c3c597c724cf02f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 06:03:45 -0400 Subject: [PATCH 007/258] libata: move atapi_send_cdb() and ata_dataout_task() to be near ata_pio_*() functions --- drivers/scsi/libata-core.c | 217 ++++++++++++++++++------------------- 1 file changed, 108 insertions(+), 109 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 546336802579..ff291b365108 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2781,6 +2781,114 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) local_irq_restore(flags); } +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + assert(ap->cdb_len >= 12); + + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + +/** + * ata_dataout_task - Write first data block to hardware + * @_data: Port to which ATA/ATAPI device is attached. + * + * When device has indicated its readiness to accept + * the data, this function sends out the CDB or + * the first data block by PIO. + * After this, + * - If polling, ata_pio_task() handles the rest. + * - Otherwise, interrupt handler takes over. + * + * LOCKING: + * Kernel thread context (may sleep) + */ + +static void ata_dataout_task(void *_data) +{ + struct ata_port *ap = _data; + struct ata_queued_cmd *qc; + u8 status; + unsigned long flags; + + qc = ata_qc_from_tag(ap, ap->active_tag); + assert(qc != NULL); + assert(qc->flags & ATA_QCFLAG_ACTIVE); + + /* sleep-wait for BSY to clear */ + DPRINTK("busy wait\n"); + if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) + goto err_out; + + /* make sure DRQ is set */ + status = ata_chk_status(ap); + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) + goto err_out; + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sector() might change the state to HSM_ST_LAST. + * so, the state is changed here before ata_pio_sector(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sector(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + return; + +err_out: + ata_pio_error(ap); +} + /** * __atapi_pio_bytes - Transfer data from/to the ATAPI device. * @qc: Command on going @@ -3784,42 +3892,6 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) ata_altstatus(ap); /* dummy read */ } -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); - - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: - ap->hsm_task_state = HSM_ST; - break; - case ATA_PROT_ATAPI_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATA_PROT_ATAPI_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - /** * ata_host_intr - Handle host interrupt for given (port, task) * @ap: Port on which interrupt arrived (possibly...) @@ -4041,79 +4113,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * ata_dataout_task - Write first data block to hardware - * @_data: Port to which ATA/ATAPI device is attached. - * - * When device has indicated its readiness to accept - * the data, this function sends out the CDB or - * the first data block by PIO. - * After this, - * - If polling, ata_pio_task() handles the rest. - * - Otherwise, interrupt handler takes over. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void ata_dataout_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - unsigned long flags; - - qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - assert(qc->flags & ATA_QCFLAG_ACTIVE); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) - goto err_out; - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) - goto err_out; - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sector() might change the state to HSM_ST_LAST. - * so, the state is changed here before ata_pio_sector(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sector(qc); - ata_altstatus(ap); /* flush */ - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - if (qc->tf.flags & ATA_TFLAG_POLLING) - queue_work(ata_wq, &ap->pio_task); - - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - return; - -err_out: - ata_pio_error(ap); -} - - /** * ata_port_start - Set port up for dma. * @ap: Port to initialize From 7282aa4b49d08254ff1dcefdf3a2fb01b02ebbe2 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sun, 9 Oct 2005 09:46:07 -0400 Subject: [PATCH 008/258] [libata irq-pio] reorganize ata_pio_sector() and __atapi_pio_bytes() - move some code out of the kmap_atomic() / kunmap_atomic() zone - remove the redundant "do_write = (qc->tf.flags & ATA_TFLAG_WRITE);" Signed-off-by: Albert Lee --- drivers/scsi/libata-core.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2c9275e30cb9..f89312654791 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2763,6 +2763,14 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) local_irq_save(flags); buf = kmap_atomic(page, KM_IRQ0) + offset; + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + /* do the actual data transfer */ + ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf - offset, KM_IRQ0); + local_irq_restore(flags); + qc->cursect++; qc->cursg_ofs++; @@ -2770,15 +2778,6 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->cursg++; qc->cursg_ofs = 0; } - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - /* do the actual data transfer */ - do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write); - - kunmap_atomic(buf - offset, KM_IRQ0); - local_irq_restore(flags); } /** @@ -2956,6 +2955,14 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) local_irq_save(flags); buf = kmap_atomic(page, KM_IRQ0) + offset; + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + /* do the actual data transfer */ + ata_data_xfer(ap, buf, count, do_write); + + kunmap_atomic(buf - offset, KM_IRQ0); + local_irq_restore(flags); + bytes -= count; qc->curbytes += count; qc->cursg_ofs += count; @@ -2965,14 +2972,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) qc->cursg_ofs = 0; } - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - /* do the actual data transfer */ - ata_data_xfer(ap, buf, count, do_write); - - kunmap_atomic(buf - offset, KM_IRQ0); - local_irq_restore(flags); - if (bytes) goto next_sg; } From 083958d313f886dc7d00522f2972f90f55c40041 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sun, 9 Oct 2005 09:47:31 -0400 Subject: [PATCH 009/258] [libata irq-pio] reorganize "buf + offset" in ata_pio_sector() and __atapi_pio_bytes() - relocate DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - buf + offset, buf - offset tidy up Signed-off-by: Albert Lee --- drivers/scsi/libata-core.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f89312654791..35ee35e176c0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2760,15 +2760,15 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0) + offset; - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - /* do the actual data transfer */ - ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write); + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); - kunmap_atomic(buf - offset, KM_IRQ0); + /* do the actual data transfer */ + ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf, KM_IRQ0); local_irq_restore(flags); qc->cursect++; @@ -2952,15 +2952,15 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0) + offset; - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - /* do the actual data transfer */ - ata_data_xfer(ap, buf, count, do_write); + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); - kunmap_atomic(buf - offset, KM_IRQ0); + /* do the actual data transfer */ + ata_data_xfer(ap, buf + offset, count, do_write); + + kunmap_atomic(buf, KM_IRQ0); local_irq_restore(flags); bytes -= count; From 91b8b3132e1870bfe3c4d3a999f13f20fc4e9726 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sun, 9 Oct 2005 09:48:44 -0400 Subject: [PATCH 010/258] [libata irq-pio] use PageHighMem() to optimize the kmap_atomic() usage as done in ide-scsi.c Signed-off-by: Albert Lee --- drivers/scsi/libata-core.c | 40 +++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 35ee35e176c0..5e750c33dd96 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2748,7 +2748,6 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) struct page *page; unsigned int offset; unsigned char *buf; - unsigned long flags; if (qc->cursect == (qc->nsect - 1)) ap->hsm_task_state = HSM_ST_LAST; @@ -2762,14 +2761,21 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); + if (PageHighMem(page)) { + unsigned long flags; - /* do the actual data transfer */ - ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); + /* do the actual data transfer */ + ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + } qc->cursect++; qc->cursg_ofs++; @@ -2908,7 +2914,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) struct page *page; unsigned char *buf; unsigned int offset, count; - unsigned long flags; if (qc->curbytes + bytes >= qc->nbytes) ap->hsm_task_state = HSM_ST_LAST; @@ -2954,14 +2959,21 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); + if (PageHighMem(page)) { + unsigned long flags; - /* do the actual data transfer */ - ata_data_xfer(ap, buf + offset, count, do_write); + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); + /* do the actual data transfer */ + ata_data_xfer(ap, buf + offset, count, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ata_data_xfer(ap, buf + offset, count, do_write); + } bytes -= count; qc->curbytes += count; From e33b9dfa3008fcaa908dc0c8c472a812c400f839 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 9 Oct 2005 09:51:46 -0400 Subject: [PATCH 011/258] [libata irq-pio] build fix --- drivers/scsi/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5e750c33dd96..9eb24d3f18db 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -72,6 +72,7 @@ static int ata_choose_xfer_mode(struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); static void __ata_qc_complete(struct ata_queued_cmd *qc); +static void ata_pio_error(struct ata_port *ap); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; From be697c3f137c9ed808753bbbc5d7751c6e5303fc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 18 Oct 2005 21:27:34 -0400 Subject: [PATCH 012/258] [libata pdc_adma] update for removal of ATA_FLAG_NOINTR --- drivers/scsi/pdc_adma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 53b8db4be1a9..f3ba6b447e81 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -481,13 +481,13 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) for (port_no = 0; port_no < host_set->n_ports; ++port_no) { struct ata_port *ap; ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { struct ata_queued_cmd *qc; struct adma_port_priv *pp = ap->private_data; if (!pp || pp->state != adma_state_mmio) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { /* check main status, clearing INTRQ */ u8 status = ata_chk_status(ap); From 94ec1ef1cf29e137e5c79372e432b040c6604be6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 30 Oct 2005 02:15:08 -0500 Subject: [PATCH 013/258] [libata pdc_adma] fix for new irq-driven PIO code --- drivers/scsi/pdc_adma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 309b205820a4..6a9d0dc085c1 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -457,13 +457,13 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) continue; handled = 1; adma_enter_reg_mode(ap); - if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) + if (ap->flags & ATA_FLAG_PORT_DISABLED) continue; pp = ap->private_data; if (!pp || pp->state != adma_state_pkt) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { if ((status & (aPERR | aPSD | aUIRQ))) drv_stat = ATA_ERR; else if (pp->pkt[0] != cDONE) From 467b16d4bebe8d251ca974eaa5da50b315206e9d Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 1 Nov 2005 19:19:01 +0800 Subject: [PATCH 014/258] [PATCH] libata irq-pio: misc fixes - ata_pio_block(): add ata_altstatus(ap) to prevent reading device status before it is valid - remove the unnecessary HSM_ST_IDLE state from ata_pio_task() - raise BUG() when unknown state is found in ata_pio_task() Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ce18de9705c4..15736e3313f0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3317,6 +3317,8 @@ static void ata_pio_block(struct ata_port *ap) ata_pio_sector(qc); } + + ata_altstatus(ap); /* flush */ } static void ata_pio_error(struct ata_port *ap) @@ -3344,9 +3346,6 @@ static void ata_pio_task(void *_data) qc_completed = 0; switch (ap->hsm_task_state) { - case HSM_ST_IDLE: - return; - case HSM_ST: ata_pio_block(ap); break; @@ -3364,6 +3363,10 @@ static void ata_pio_task(void *_data) case HSM_ST_ERR: ata_pio_error(ap); return; + + default: + BUG(); + return; } if (timeout) From e27486db89ef04d5df1727c52362fa3d50cff241 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 1 Nov 2005 19:24:49 +0800 Subject: [PATCH 015/258] [PATCH] libata irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue - remove ap->dataout_task from struct ata_port - let ata_pio_task() handle the HSM_ST_FIRST state. - rename ata_dataout_task() to ata_pio_first_block() - replace the ata_dataout_task workqueue with ata_pio_task workqueue Signed-off-by: Albert Lee ======== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 20 +++++++++++--------- include/linux/libata.h | 2 -- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 15736e3313f0..96b8bbaa7631 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3056,8 +3056,8 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) } /** - * ata_dataout_task - Write first data block to hardware - * @_data: Port to which ATA/ATAPI device is attached. + * ata_pio_first_block - Write first data block to hardware + * @ap: Port to which ATA/ATAPI device is attached. * * When device has indicated its readiness to accept * the data, this function sends out the CDB or @@ -3070,9 +3070,8 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) * Kernel thread context (may sleep) */ -static void ata_dataout_task(void *_data) +static void ata_pio_first_block(struct ata_port *ap) { - struct ata_port *ap = _data; struct ata_queued_cmd *qc; u8 status; unsigned long flags; @@ -3346,6 +3345,10 @@ static void ata_pio_task(void *_data) qc_completed = 0; switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + ata_pio_first_block(ap); + return; + case HSM_ST: ata_pio_block(ap); break; @@ -3796,10 +3799,10 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - queue_work(ata_wq, &ap->dataout_task); + queue_work(ata_wq, &ap->pio_task); /* always send first data block using - * the ata_dataout_task() codepath. + * the ata_pio_task() codepath. */ } else { /* PIO data in protocol */ @@ -3826,7 +3829,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - queue_work(ata_wq, &ap->dataout_task); + queue_work(ata_wq, &ap->pio_task); break; case ATA_PROT_ATAPI_DMA: @@ -3838,7 +3841,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - queue_work(ata_wq, &ap->dataout_task); + queue_work(ata_wq, &ap->pio_task); break; default: @@ -4426,7 +4429,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; - INIT_WORK(&ap->dataout_task, ata_dataout_task, ap); INIT_WORK(&ap->pio_task, ata_pio_task, ap); for (i = 0; i < ATA_MAX_DEVICES; i++) diff --git a/include/linux/libata.h b/include/linux/libata.h index ad0451dfee15..70ae140dbf23 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -346,8 +346,6 @@ struct ata_port { struct ata_host_stats stats; struct ata_host_set *host_set; - struct work_struct dataout_task; - struct work_struct pio_task; unsigned int hsm_task_state; unsigned long pio_task_timeout; From fbcdd80b0d5bde06f3483b9a13f9599a0452431c Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 1 Nov 2005 19:30:05 +0800 Subject: [PATCH 016/258] [PATCH] libata irq-pio: eliminate unnecessary queuing in ata_pio_first_block() - change the return value of ata_pio_complete() 0 <-> 1 - add return value for ata_pio_first_block() - rename variable "qc_completed" to "has_next" in ata_pio_task() - use has_next to eliminate unnecessary queuing in ata_pio_first_block() Signed-off-by: Albert Lee ========== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 53 ++++++++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 96b8bbaa7631..2e0e6cca327c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2790,7 +2790,8 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * None. (executing in kernel thread context) * * RETURNS: - * Non-zero if qc completed, zero otherwise. + * Zero if qc completed. + * Non-zero if has next. */ static int ata_pio_complete (struct ata_port *ap) @@ -2812,14 +2813,14 @@ static int ata_pio_complete (struct ata_port *ap) if (drv_stat & (ATA_BUSY | ATA_DRQ)) { ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; - return 0; + return 1; } } drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { ap->hsm_task_state = HSM_ST_ERR; - return 0; + return 1; } qc = ata_qc_from_tag(ap, ap->active_tag); @@ -2831,7 +2832,7 @@ static int ata_pio_complete (struct ata_port *ap) /* another command may start at this point */ - return 1; + return 0; } @@ -3068,27 +3069,42 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) * * LOCKING: * Kernel thread context (may sleep) + * + * RETURNS: + * Zero if irq handler takes over + * Non-zero if has next (polling). */ -static void ata_pio_first_block(struct ata_port *ap) +static int ata_pio_first_block(struct ata_port *ap) { struct ata_queued_cmd *qc; u8 status; unsigned long flags; + int has_next; qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); assert(qc->flags & ATA_QCFLAG_ACTIVE); + /* if polling, we will stay in the work queue after sending the data. + * otherwise, interrupt handler takes over after sending the data. + */ + has_next = (qc->tf.flags & ATA_TFLAG_POLLING); + /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) + if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) { + ap->hsm_task_state = HSM_ST_TMOUT; goto err_out; + } /* make sure DRQ is set */ status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { + /* device status error */ + ap->hsm_task_state = HSM_ST_ERR; goto err_out; + } /* Send the CDB (atapi) or the first data block (ata pio out). * During the state transition, interrupt handler shouldn't @@ -3112,18 +3128,15 @@ static void ata_pio_first_block(struct ata_port *ap) /* send CDB */ atapi_send_cdb(ap, qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + /* if polling, ata_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. */ - if (qc->tf.flags & ATA_TFLAG_POLLING) - queue_work(ata_wq, &ap->pio_task); - - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - return; + return has_next; err_out: - ata_pio_error(ap); + return 1; /* has next */ } /** @@ -3338,23 +3351,23 @@ static void ata_pio_task(void *_data) { struct ata_port *ap = _data; unsigned long timeout; - int qc_completed; + int has_next; fsm_start: timeout = 0; - qc_completed = 0; + has_next = 1; switch (ap->hsm_task_state) { case HSM_ST_FIRST: - ata_pio_first_block(ap); - return; + has_next = ata_pio_first_block(ap); + break; case HSM_ST: ata_pio_block(ap); break; case HSM_ST_LAST: - qc_completed = ata_pio_complete(ap); + has_next = ata_pio_complete(ap); break; case HSM_ST_POLL: @@ -3374,7 +3387,7 @@ static void ata_pio_task(void *_data) if (timeout) queue_delayed_work(ata_wq, &ap->pio_task, timeout); - else if (!qc_completed) + else if (has_next) goto fsm_start; } From 07f6f7d074e68d56d82e7cc5c65096033ac8dc56 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 1 Nov 2005 19:33:20 +0800 Subject: [PATCH 017/258] [PATCH] libata irq-pio: add read/write multiple support - add is_multi_taskfile() to ata.h - initialize ata_device->multi_count with device identify data - use ata_pio_sectors() to support r/w multiple commands Signed-off-by: Albert Lee ======== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 44 ++++++++++++++++++++++++++++++++------ include/linux/ata.h | 8 +++++++ 2 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2e0e6cca327c..59a4a26bc13f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1261,6 +1261,12 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) } + if (dev->id[59] & 0x100) { + dev->multi_count = dev->id[59] & 0xff; + DPRINTK("ata%u: dev %u multi count %u\n", + ap->id, device, dev->multi_count); + } + ap->host->max_cmd_len = 16; } @@ -2804,7 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * HSM_ST_POLL state. + * HSM_ST_LAST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { @@ -3020,6 +3026,32 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) } } +/** + * ata_pio_sectors - Transfer one or many 512-byte sectors. + * @qc: Command on going + * + * Transfer one or many ATA_SECT_SIZE of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + assert(qc->dev->multi_count); + + nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); +} + /** * atapi_send_cdb - Write CDB bytes to hardware * @ap: Port to which ATAPI device is attached. @@ -3118,11 +3150,11 @@ static int ata_pio_first_block(struct ata_port *ap) * send first data block. */ - /* ata_pio_sector() might change the state to HSM_ST_LAST. - * so, the state is changed here before ata_pio_sector(). + /* ata_pio_sectors() might change the state to HSM_ST_LAST. + * so, the state is changed here before ata_pio_sectors(). */ ap->hsm_task_state = HSM_ST; - ata_pio_sector(qc); + ata_pio_sectors(qc); ata_altstatus(ap); /* flush */ } else /* send CDB */ @@ -3327,7 +3359,7 @@ static void ata_pio_block(struct ata_port *ap) return; } - ata_pio_sector(qc); + ata_pio_sectors(qc); } ata_altstatus(ap); /* flush */ @@ -4213,7 +4245,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, goto fsm_start; } - ata_pio_sector(qc); + ata_pio_sectors(qc); if (ap->hsm_task_state == HSM_ST_LAST && (!(qc->tf.flags & ATA_TFLAG_WRITE))) { diff --git a/include/linux/ata.h b/include/linux/ata.h index d54da3306d2c..f512104a1a3f 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -293,6 +293,14 @@ static inline int is_atapi_taskfile(const struct ata_taskfile *tf) (tf->protocol == ATA_PROT_ATAPI_DMA); } +static inline int is_multi_taskfile(struct ata_taskfile *tf) +{ + return (tf->command == ATA_CMD_READ_MULTI) || + (tf->command == ATA_CMD_WRITE_MULTI) || + (tf->command == ATA_CMD_READ_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_EXT); +} + static inline int ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) From d67e7ebb2a15bf0429c55f2fc1c4b02808367874 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 18 Nov 2005 11:55:00 -0500 Subject: [PATCH 018/258] [libata sata_mv] IRQ PIO build fix --- drivers/scsi/sata_mv.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 9687646d73e1..6dc2a612ccbd 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1220,8 +1220,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, handled++; } - if (ap && - (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) + if (ap && (ap->flags & ATA_FLAG_PORT_DISABLED)) continue; err_mask = ac_err_mask(ata_status); @@ -1242,7 +1241,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); /* mark qc status appropriately */ - if (!(qc->tf.ctl & ATA_NIEN)) + if (!(qc->tf.flags & ATA_TFLAG_POLLING)) ata_qc_complete(qc, err_mask); } } From 278efe950988e72e2d0cea35059438fc27035d13 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 6 Dec 2005 05:01:27 -0500 Subject: [PATCH 019/258] [libata] irq-pio: fix breakage related to err_mask merge --- drivers/scsi/libata-core.c | 3 ++- drivers/scsi/sata_mv.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 82f566cf75c6..657537f96c3a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4336,7 +4336,8 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ap->id, status, host_stat); ap->hsm_task_state = HSM_ST_IDLE; - ata_qc_complete(qc, status | ATA_ERR); + qc->err_mask |= __ac_err_mask(status); + ata_qc_complete(qc); break; default: goto idle_irq; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ef148acb5eeb..17044168ebfe 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1244,7 +1244,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* mark qc status appropriately */ if (!(qc->tf.flags & ATA_TFLAG_POLLING)) { qc->err_mask |= err_mask; - ata_qc_complete(qc, err_mask); + ata_qc_complete(qc); } } } From 3d0a59c02303df01848537b3bf938dc11e9a0ded Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 13 Dec 2005 22:28:19 -0500 Subject: [PATCH 020/258] [libata sata_promise] irq_pio: fix merge bug --- drivers/scsi/sata_promise.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index b4cbc9d6be1b..e35838043b56 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -70,6 +70,10 @@ enum { PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */ PDC_RESET = (1 << 11), /* HDMA reset */ + + PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | + ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | + ATA_FLAG_PIO_POLLING, }; @@ -162,9 +166,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_2037x */ { .sht = &pdc_ata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_POLLING, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -174,9 +176,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20319 */ { .sht = &pdc_ata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_POLLING, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -186,9 +186,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20619 */ { .sht = &pdc_ata_sht, - .host_flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS | - ATA_FLAG_PIO_POLLING, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ From a4f16610081001640ffe0314024bc31c10f69757 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 26 Dec 2005 16:40:53 +0800 Subject: [PATCH 021/258] [PATCH] libata-dev: determine err_mask when error is found Changes: - Determine err_mask directly when an error is found. - Remove "qc->err_mask |= __ac_err_mask(status);" in ata_host_intr() Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4a61061d0bde..41f76b9bf992 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3265,6 +3265,7 @@ static int ata_pio_first_block(struct ata_port *ap) /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) { + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_TMOUT; goto err_out; } @@ -3273,6 +3274,7 @@ static int ata_pio_first_block(struct ata_port *ap) status = ata_chk_status(ap); if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { /* device status error */ + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_ERR; goto err_out; } @@ -4288,6 +4290,12 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* before we do anything else, clear DMA-Start bit */ ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } } break; case HSM_ST: @@ -4313,8 +4321,10 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ap->ops->irq_clear(ap); /* check error */ - if (unlikely((status & ATA_ERR) || (host_stat & ATA_DMA_ERR))) + if (unlikely(status & (ATA_ERR | ATA_DF))) { + qc->err_mask |= AC_ERR_DEV; ap->hsm_task_state = HSM_ST_ERR; + } fsm_start: switch (ap->hsm_task_state) { @@ -4326,6 +4336,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* check device status */ if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { /* Wrong status. Let EH handle this */ + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4354,6 +4365,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4375,6 +4387,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, case HSM_ST_LAST: if (unlikely(status & ATA_DRQ)) { /* handle DRQ=1 as error */ + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4394,8 +4407,12 @@ inline unsigned int ata_host_intr (struct ata_port *ap, printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", ap->id, status, host_stat); + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + assert(qc->err_mask); + ap->hsm_task_state = HSM_ST_IDLE; - qc->err_mask |= __ac_err_mask(status); ata_qc_complete(qc); break; default: From 000080c3499cd5037e60c08a8053efb9e48aa9c0 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 26 Dec 2005 16:48:00 +0800 Subject: [PATCH 022/258] [PATCH] libata-dev: filter out noisy ATAPI error messages Changes: - Filter out ATAPI packet command error messages in ata_pio_error() - Filter out ATAPI packet command error messages in ata_host_intr() Signed-off-by: Albert Lee ====== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 41f76b9bf992..911151db8c25 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3520,11 +3520,12 @@ static void ata_pio_error(struct ata_port *ap) { struct ata_queued_cmd *qc; - printk(KERN_WARNING "ata%u: PIO error\n", ap->id); - qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); + if (qc->tf.command != ATA_CMD_PACKET) + printk(KERN_WARNING "ata%u: PIO error\n", ap->id); + /* make sure qc->err_mask is available to * know what's wrong and recover */ @@ -4404,8 +4405,9 @@ inline unsigned int ata_host_intr (struct ata_port *ap, break; case HSM_ST_ERR: - printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", - ap->id, status, host_stat); + if (qc->tf.command != ATA_CMD_PACKET) + printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", + ap->id, status, host_stat); /* make sure qc->err_mask is available to * know what's wrong and recover From aef9d533da2eb7a5700a8c8700f2597c35cc50d1 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 8 Feb 2006 16:37:43 +0800 Subject: [PATCH 023/258] [PATCH] libata-dev: Fix array index value in ata_rwcmd_protocol() Signed-off-by: Albert Lee === Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 6daba4e2c3fd..dab13ed6fa78 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -611,7 +611,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { /* Unable to use DMA due to host limitation */ tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 4; + index = dev->multi_count ? 0 : 8; } else { tf->protocol = ATA_PROT_DMA; index = 16; From 20ea079e5883ab2b82fa5e576957f52e4e5c252c Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 8 Feb 2006 16:48:49 +0800 Subject: [PATCH 024/258] [PATCH] libata-dev: Use new ata_queue_pio_task() for PIO polling task - Use new ata_queue_pio_task() for PIO polling task. - Remove the unused ata_queue_packet_task() function. (irq-pio had merged the 2 queues into one.) Signed-off-by: Albert Lee === Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index dab13ed6fa78..bbce1622eb76 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1072,12 +1072,6 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) timing API will get this right anyway */ } -static inline void -ata_queue_packet_task(struct ata_port *ap) -{ - queue_work(ata_wq, &ap->packet_task); -} - static inline void ata_queue_pio_task(struct ata_port *ap) { @@ -3971,7 +3965,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - queue_work(ata_wq, &ap->pio_task); + ata_queue_pio_task(ap); break; @@ -4024,7 +4018,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_queue_packet_task(ap); + ata_queue_pio_task(ap); break; case ATA_PROT_ATAPI_DMA: @@ -4036,7 +4030,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_queue_packet_task(ap); + ata_queue_pio_task(ap); break; default: From 555a8965069b8e34292cbccc3ad8f619b96815fe Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 8 Feb 2006 16:50:29 +0800 Subject: [PATCH 025/258] [PATCH] libata-dev: Use new AC_ERR_* flags - Use new AC_ERR_* flags as done in Tejun's patches - In ata_qc_timeout(), replace ac_err_mask(drv_stat) with AC_ERR_TIMEOUT. This makes time out handler always report error to upper layer. Otherwise if the drv_stat looks good, libata might falsely report OK to the upper layer. Signed-off-by: Albert Lee === Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index bbce1622eb76..415c64f81145 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3315,7 +3315,7 @@ static int ata_pio_first_block(struct ata_port *ap) /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_TIMEOUT; ap->hsm_task_state = HSM_ST_TMOUT; goto err_out; } @@ -3324,7 +3324,7 @@ static int ata_pio_first_block(struct ata_port *ap) status = ata_chk_status(ap); if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { /* device status error */ - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto err_out; } @@ -3684,7 +3684,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(drv_stat); + qc->err_mask |= AC_ERR_TIMEOUT; break; } @@ -4365,7 +4365,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* check device status */ if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { /* Wrong status. Let EH handle this */ - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4394,7 +4394,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4416,7 +4416,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, case HSM_ST_LAST: if (unlikely(status & ATA_DRQ)) { /* handle DRQ=1 as error */ - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } From 332b5a52f2f96bc2d13bbe594a430318c0ee4425 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 8 Feb 2006 16:51:34 +0800 Subject: [PATCH 026/258] [PATCH] libata-dev: Minor comment fix Signed-off-by: Albert Lee === Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 415c64f81145..ff31b0b6a6b3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4510,19 +4510,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, * without filling any other registers @@ -4613,6 +4600,19 @@ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) return 0; } +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; From 41232d3ecac9df8eb94ff27330eb84b8baccc6b7 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 9 Feb 2006 04:52:55 -0500 Subject: [PATCH 027/258] [libata] build fix after merging some pre-packet_task-removal code --- drivers/scsi/libata-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c93bb1bd3332..59d8dd025107 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1087,10 +1087,10 @@ ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay) } /** - * ata_flush_pio_tasks - Flush pio_task and packet_task + * ata_flush_pio_tasks - Flush pio_task * @ap: the target ata_port * - * After this function completes, pio_task and packet_task are + * After this function completes, pio_task is * guranteed not to be running or scheduled. * * LOCKING: @@ -1117,7 +1117,6 @@ static void ata_flush_pio_tasks(struct ata_port *ap) * Cancel and flush. */ tmp |= cancel_delayed_work(&ap->pio_task); - tmp |= cancel_delayed_work(&ap->packet_task); if (!tmp) { DPRINTK("flush #2\n"); flush_workqueue(ata_wq); From 587005de144acd3007b8e7f2a2a7c6add157c155 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 11 Feb 2006 18:17:32 -0500 Subject: [PATCH 028/258] [libata irq-pio] s/assert/WARN_ON/ --- drivers/scsi/libata-core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3fd55ef5410f..bfe0a00b1135 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3226,7 +3226,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) /* READ/WRITE MULTIPLE */ unsigned int nsect; - assert(qc->dev->multi_count); + WARN_ON(qc->dev->multi_count == 0); nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); while (nsect--) @@ -3251,7 +3251,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) { /* send SCSI cdb */ DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); + WARN_ON(ap->cdb_len < 12); ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); ata_altstatus(ap); /* flush */ @@ -3298,8 +3298,8 @@ static int ata_pio_first_block(struct ata_port *ap) int has_next; qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - assert(qc->flags & ATA_QCFLAG_ACTIVE); + WARN_ON(qc == NULL); + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); /* if polling, we will stay in the work queue after sending the data. * otherwise, interrupt handler takes over after sending the data. @@ -3945,7 +3945,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_DMA: - assert(!(qc->tf.flags & ATA_TFLAG_POLLING)); + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ @@ -3997,7 +3997,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI_DMA: - assert(!(qc->tf.flags & ATA_TFLAG_POLLING)); + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ @@ -4415,7 +4415,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* make sure qc->err_mask is available to * know what's wrong and recover */ - assert(qc->err_mask); + WARN_ON(qc->err_mask == 0); ap->hsm_task_state = HSM_ST_IDLE; ata_qc_complete(qc); From db024d5398cd332023896caf70530564b15ec88e Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 13 Feb 2006 00:23:57 -0500 Subject: [PATCH 029/258] [libata] build fix after cdb_len move --- drivers/scsi/libata-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5ab220e9907c..d1803c91b81f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3282,9 +3282,9 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) { /* send SCSI cdb */ DPRINTK("send cdb\n"); - WARN_ON(ap->cdb_len < 12); + WARN_ON(qc->dev->cdb_len < 12); - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); ata_altstatus(ap); /* flush */ switch (qc->tf.protocol) { From a5fd79ccd60b7c9cc0221dfaaa950933eff6af99 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 20 Feb 2006 05:21:14 -0500 Subject: [PATCH 030/258] sata_vsc build fix --- drivers/scsi/sata_vsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 2d448e84889c..5845758e9a69 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -229,7 +229,7 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, qc = ata_qc_from_tag(ap, ap->active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); - } else { + else { printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); ata_chk_status(ap); handled++; From c2956a3b0d1c17b38da369811a6ce93eb7a01a04 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 3 Mar 2006 10:34:05 +0800 Subject: [PATCH 031/258] [PATCH] libata-dev: recognize WRITE_MULTI_FUA_EXT for r/w multiple Recognize ATA_CMD_WRITE_MULTI_FUA_EXT as r/w multiple commands. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- include/linux/ata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 469952366ed4..e7b0c21f6cd4 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -314,7 +314,8 @@ static inline int is_multi_taskfile(struct ata_taskfile *tf) return (tf->command == ATA_CMD_READ_MULTI) || (tf->command == ATA_CMD_WRITE_MULTI) || (tf->command == ATA_CMD_READ_MULTI_EXT) || - (tf->command == ATA_CMD_WRITE_MULTI_EXT); + (tf->command == ATA_CMD_WRITE_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT); } static inline int ata_ok(u8 status) From 46e202ec1feeac3cb722cd3410d62a9a00891388 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 11 Mar 2006 19:25:47 -0500 Subject: [PATCH 032/258] libata: irq-pio build fixes --- drivers/scsi/libata-core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5060a1a1ad25..1a00c80b96d4 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3809,7 +3809,7 @@ static void ata_pio_task(void *_data) if (timeout) ata_port_queue_task(ap, ata_pio_task, ap, timeout); - else if (!qc_completed) + else if (has_next) goto fsm_start; } @@ -3866,7 +3866,8 @@ static void atapi_packet_task(void *_data) * finished. Hence, the following locking. */ spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; +#warning FIXME + /* ap->flags &= ~ATA_FLAG_NOINTR; */ ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) ap->ops->bmdma_start(qc); /* initiate bmdma */ @@ -4200,7 +4201,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_queue_pio_task(ap); + ata_port_queue_task(ap, ata_pio_task, ap, 0); break; From 200d5a7684cc49ef4be40e832daf3f217e70dfbb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2006 16:24:49 +0900 Subject: [PATCH 033/258] [PATCH] libata: increase LBA48 max sectors to 65535 max_hw_sectors/max_sectors separation patch made into the tree, increase max_sectors to its hardware limit. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 2 +- include/linux/libata.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index dd954a23b357..b53ef494a206 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -678,7 +678,7 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, */ max_sectors = ATA_MAX_SECTORS; if (dev->flags & ATA_DFLAG_LBA48) - max_sectors = 2048; + max_sectors = ATA_MAX_SECTORS_LBA48; if (dev->max_sectors) max_sectors = dev->max_sectors; diff --git a/include/linux/libata.h b/include/linux/libata.h index d81cecdda4f3..4dff3cf9d389 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -110,6 +110,7 @@ enum { ATA_DEF_QUEUE = 1, ATA_MAX_QUEUE = 1, ATA_MAX_SECTORS = 200, /* FIXME */ + ATA_MAX_SECTORS_LBA48 = 65535, ATA_MAX_BUS = 2, ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, From 84ac69e8bf9f36eb0166817373336d14fa58f5cc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 24 Mar 2006 09:27:49 -0500 Subject: [PATCH 034/258] [libata] irq-pio: fix build breakage --- drivers/scsi/sata_vsc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 8c818d47c1fd..9f621a97c977 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -229,14 +229,13 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, handled++; } - if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); - } else if (is_vsc_sata_int_err(i, int_status)) { + else if (is_vsc_sata_int_err(i, int_status)) { /* * On some chips (i.e. Intel 31244), an error * interrupt will sneak in at initialization From cf2f7689f94ee02e52d5331bc1a87421a67a882c Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:37:53 +0800 Subject: [PATCH 035/258] [PATCH] libata-dev: Remove trailing whitespaces Remove trailing whitespaces. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c3c4263fdb12..76418289aa78 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4397,7 +4397,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, fsm_start: switch (ap->hsm_task_state) { case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ + /* Some pre-ATAPI-4 devices assert INTRQ * at this state when ready to receive CDB. */ @@ -4422,7 +4422,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ap->hsm_task_state = HSM_ST_LAST; goto fsm_start; } - + atapi_pio_bytes(qc); if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) @@ -4476,7 +4476,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", ap->id, status, host_stat); - /* make sure qc->err_mask is available to + /* make sure qc->err_mask is available to * know what's wrong and recover */ WARN_ON(qc->err_mask == 0); From 13ee4628ce68d1e54df01cc31239c8887c59e65d Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:39:34 +0800 Subject: [PATCH 036/258] [PATCH] libata-dev: Fix merge problem with upstream Fix merge problem with upstream. Changes: 1. add missing dev->cdb_len = 16 for ATA devices 2. use ata_pio_task instead of atapi_packet_task Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 76418289aa78..9ef5b8ab5b15 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1299,6 +1299,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, ap->id, device, dev->multi_count); } + dev->cdb_len = 16; } /* ATAPI-specific feature tests */ @@ -4288,7 +4289,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, ap, 0); break; case ATA_PROT_ATAPI_DMA: @@ -4300,7 +4301,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, ap, 0); break; default: From 19d5d7309a928eb86f58b37165a2d501621ae3c0 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:41:43 +0800 Subject: [PATCH 037/258] [PATCH] libata-dev: Remove atapi_packet_task() atapi_packet_task() was replaced by ata_pio_task(). Remove the unused atapi_packet_task(). Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 73 -------------------------------------- 1 file changed, 73 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9ef5b8ab5b15..0eb75e2dc0e2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3849,79 +3849,6 @@ static void ata_pio_task(void *_data) goto fsm_start; } -/** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void atapi_packet_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_TIMEOUT; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_HSM; - goto err_out; - } - - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; - - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); -#warning FIXME - /* ap->flags &= ~ATA_FLAG_NOINTR; */ - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } else { - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - - /* PIO commands are handled by polling */ - ap->hsm_task_state = HSM_ST; - ata_port_queue_task(ap, ata_pio_task, ap, 0); - } - - return; - -err_out: - ata_poll_qc_complete(qc); -} - /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out From e2cec77117a6e4fcbac2601e2f7b0b3f4f5a4c84 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:43:49 +0800 Subject: [PATCH 038/258] [PATCH] libata-dev: Move out the HSM code from ata_host_intr() Move out the irq-pio HSM code from ata_host_intr() to the new ata_hsm_move() function verbatim. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 206 +++++++++++++++++++------------------ 1 file changed, 106 insertions(+), 100 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0eb75e2dc0e2..7214530ac161 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3805,6 +3805,111 @@ static void ata_pio_error(struct ata_port *ap) ata_poll_qc_complete(qc); } +static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status) +{ + /* check error */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + qc->err_mask |= AC_ERR_DEV; + ap->hsm_task_state = HSM_ST_ERR; + } + +fsm_start: + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* check device status */ + if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { + /* Wrong status. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_send_cdb(ap, qc); + + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATA_PROT_ATAPI) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* no more data to transfer */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + ata_altstatus(ap); + status = ata_chk_status(ap); + goto fsm_start; + } + } + + ata_altstatus(ap); /* flush */ + break; + + case HSM_ST_LAST: + if (unlikely(status & ATA_DRQ)) { + /* handle DRQ=1 as error */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: command complete, drv_stat 0x%x\n", + ap->id, status); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); + break; + + case HSM_ST_ERR: + if (qc->tf.command != ATA_CMD_PACKET) + printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", + ap->id, status, host_stat); + + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + ata_qc_complete(qc); + break; + default: + goto idle_irq; + } + +} + static void ata_pio_task(void *_data) { struct ata_port *ap = _data; @@ -4316,106 +4421,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* ack bmdma irq events */ ap->ops->irq_clear(ap); - /* check error */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - qc->err_mask |= AC_ERR_DEV; - ap->hsm_task_state = HSM_ST_ERR; - } - -fsm_start: - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* check device status */ - if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { - /* Wrong status. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - atapi_send_cdb(ap, qc); - - break; - - case HSM_ST: - /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { - /* ATAPI PIO protocol */ - if ((status & ATA_DRQ) == 0) { - /* no more data to transfer */ - ap->hsm_task_state = HSM_ST_LAST; - goto fsm_start; - } - - atapi_pio_bytes(qc); - - if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) - /* bad ireason reported by device */ - goto fsm_start; - - } else { - /* ATA PIO protocol */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - ata_pio_sectors(qc); - - if (ap->hsm_task_state == HSM_ST_LAST && - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - /* all data read */ - ata_altstatus(ap); - status = ata_chk_status(ap); - goto fsm_start; - } - } - - ata_altstatus(ap); /* flush */ - break; - - case HSM_ST_LAST: - if (unlikely(status & ATA_DRQ)) { - /* handle DRQ=1 as error */ - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* no more data to transfer */ - DPRINTK("ata%u: command complete, drv_stat 0x%x\n", - ap->id, status); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - break; - - case HSM_ST_ERR: - if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", - ap->id, status, host_stat); - - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - ata_qc_complete(qc); - break; - default: - goto idle_irq; - } - + ata_hsm_move(ap, qc, status); return 1; /* irq handled */ idle_irq: From 6912ccd5a4a095d71fd7215ef2abea877c8fed6f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:45:49 +0800 Subject: [PATCH 039/258] [PATCH] libata-dev: Minor fix for ata_hsm_move() to work with ata_host_intr() Minor fix for ata_hsm_move() to work with ata_host_intr(). Changes: - WARN_ON() and comment fix - Make the HSM_ST_LAST device status checking more rigid. - Treat unknown HSM state as BUG(). Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 7214530ac161..094c7907534a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3808,6 +3808,8 @@ static void ata_pio_error(struct ata_port *ap) static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, u8 status) { + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + /* check error */ if (unlikely(status & (ATA_ERR | ATA_DF))) { qc->err_mask |= AC_ERR_DEV; @@ -3817,10 +3819,6 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, fsm_start: switch (ap->hsm_task_state) { case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - /* check device status */ if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { /* Wrong status. Let EH handle this */ @@ -3873,9 +3871,8 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, break; case HSM_ST_LAST: - if (unlikely(status & ATA_DRQ)) { - /* handle DRQ=1 as error */ - qc->err_mask |= AC_ERR_HSM; + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -3884,17 +3881,18 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, DPRINTK("ata%u: command complete, drv_stat 0x%x\n", ap->id, status); + WARN_ON(qc->err_mask); + ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(status); ata_qc_complete(qc); break; case HSM_ST_ERR: if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n", - ap->id, status, host_stat); + printk(KERN_ERR "ata%u: command error, drv_stat 0x%x\n", + ap->id, status); /* make sure qc->err_mask is available to * know what's wrong and recover @@ -3905,7 +3903,7 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, ata_qc_complete(qc); break; default: - goto idle_irq; + BUG(); } } @@ -4371,6 +4369,10 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* Check whether we are expecting interrupt in this state */ switch (ap->hsm_task_state) { case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. * The flag was turned on only for atapi devices. * No need to check is_atapi_taskfile(&qc->tf) again. From bb5cb290f095f17f88c912e3da35adf5b2d9500b Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:48:02 +0800 Subject: [PATCH 040/258] [PATCH] libata-dev: Let ata_hsm_move() work with both irq-pio and polling pio Let ata_hsm_move() work with both irq-pio and polling pio codepath. Changes: - add a new parameter "in_wq" for polling pio - add return value "poll_next" to tell polling pio task whether the HSM is finished - merge code from ata_pio_first_block() to the HSM_ST_FIRST state. - call ata_poll_qc_complete() if called from the workqueue Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 87 +++++++++++++++++++++++++++++++++++--- 1 file changed, 81 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 094c7907534a..33b39d3ce2d3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3805,11 +3805,36 @@ static void ata_pio_error(struct ata_port *ap) ata_poll_qc_complete(qc); } -static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status) +/** + * ata_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ + +static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) { + unsigned long flags = 0; + int poll_next; + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + /* Make sure ata_qc_issue_prot() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON(in_wq != ((qc->tf.flags & ATA_TFLAG_POLLING) || + (ap->hsm_task_state == HSM_ST_FIRST && + ((qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) || + (is_atapi_taskfile(&qc->tf) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)))))); + /* check error */ if (unlikely(status & (ATA_ERR | ATA_DF))) { qc->err_mask |= AC_ERR_DEV; @@ -3819,6 +3844,14 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, fsm_start: switch (ap->hsm_task_state) { case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + /* check device status */ if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { /* Wrong status. Let EH handle this */ @@ -3827,8 +3860,36 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, goto fsm_start; } - atapi_send_cdb(ap, qc); + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(&ap->host_set->lock, flags); + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ break; case HSM_ST: @@ -3868,6 +3929,7 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, } ata_altstatus(ap); /* flush */ + poll_next = 1; break; case HSM_ST_LAST: @@ -3886,7 +3948,12 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ - ata_qc_complete(qc); + if (in_wq) + ata_poll_qc_complete(qc); + else + ata_qc_complete(qc); + + poll_next = 0; break; case HSM_ST_ERR: @@ -3900,12 +3967,20 @@ static void ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, WARN_ON(qc->err_mask == 0); ap->hsm_task_state = HSM_ST_IDLE; - ata_qc_complete(qc); + + if (in_wq) + ata_poll_qc_complete(qc); + else + ata_qc_complete(qc); + + poll_next = 0; break; default: + poll_next = 0; BUG(); } + return poll_next; } static void ata_pio_task(void *_data) @@ -4423,7 +4498,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, /* ack bmdma irq events */ ap->ops->irq_clear(ap); - ata_hsm_move(ap, qc, status); + ata_hsm_move(ap, qc, status, 0); return 1; /* irq handled */ idle_irq: From a1af37344f669d0fefa8c8a9e37eb6a7c086a2c2 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:50:15 +0800 Subject: [PATCH 041/258] [PATCH] libata-dev: Convert ata_pio_task() to use the new ata_hsm_move() Convert ata_pio_task() to use the new ata_hsm_move(). Changes: - refactor ata_pio_task() to poll device status register and - call the new ata_hsm_move() when device indicates it is not BSY. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 60 ++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 32 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 33b39d3ce2d3..eeeeda0481a2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3986,44 +3986,40 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, static void ata_pio_task(void *_data) { struct ata_port *ap = _data; - unsigned long timeout; - int has_next; + struct ata_queued_cmd *qc; + u8 status; + int poll_next; fsm_start: - timeout = 0; - has_next = 1; + WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - has_next = ata_pio_first_block(ap); - break; + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); - case HSM_ST: - ata_pio_block(ap); - break; - - case HSM_ST_LAST: - has_next = ata_pio_complete(ap); - break; - - case HSM_ST_POLL: - case HSM_ST_LAST_POLL: - timeout = ata_pio_poll(ap); - break; - - case HSM_ST_TMOUT: - case HSM_ST_ERR: - ata_pio_error(ap); - return; - - default: - BUG(); - return; + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + msleep(2); + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_port_queue_task(ap, ata_pio_task, ap, ATA_SHORT_PAUSE); + return; + } } - if (timeout) - ata_port_queue_task(ap, ata_pio_task, ap, timeout); - else if (has_next) + /* move the HSM */ + poll_next = ata_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) goto fsm_start; } From 27cdadef6dfe0d0614653919a110fc75ab1650ce Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:53:57 +0800 Subject: [PATCH 042/258] [PATCH] libata-dev: Cleanup unused enums/functions Cleanup the following unused functions: - ata_pio_poll() - ata_pio_complete() - ata_pio_first_block() - ata_pio_block() - ata_pio_error() ap->pio_task_timeout and other enums. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 279 ------------------------------------- include/linux/libata.h | 9 -- 2 files changed, 288 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index eeeeda0481a2..ef0d0dd90e17 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -67,7 +67,6 @@ static void ata_set_mode(struct ata_port *ap); static unsigned int ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); -static void ata_pio_error(struct ata_port *ap); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; @@ -3131,114 +3130,6 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc) spin_unlock_irqrestore(&ap->host_set->lock, flags); } -/** - * ata_pio_poll - poll using PIO, depending on current state - * @ap: the target ata_port - * - * LOCKING: - * None. (executing in kernel thread context) - * - * RETURNS: - * timeout value to use - */ - -static unsigned long ata_pio_poll(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - u8 status; - unsigned int poll_state = HSM_ST_UNKNOWN; - unsigned int reg_state = HSM_ST_UNKNOWN; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - switch (ap->hsm_task_state) { - case HSM_ST: - case HSM_ST_POLL: - poll_state = HSM_ST_POLL; - reg_state = HSM_ST; - break; - case HSM_ST_LAST: - case HSM_ST_LAST_POLL: - poll_state = HSM_ST_LAST_POLL; - reg_state = HSM_ST_LAST; - break; - default: - BUG(); - break; - } - - status = ata_chk_status(ap); - if (status & ATA_BUSY) { - if (time_after(jiffies, ap->pio_task_timeout)) { - qc->err_mask |= AC_ERR_TIMEOUT; - ap->hsm_task_state = HSM_ST_TMOUT; - return 0; - } - ap->hsm_task_state = poll_state; - return ATA_SHORT_PAUSE; - } - - ap->hsm_task_state = reg_state; - return 0; -} - -/** - * ata_pio_complete - check if drive is busy or idle - * @ap: the target ata_port - * - * LOCKING: - * None. (executing in kernel thread context) - * - * RETURNS: - * Zero if qc completed. - * Non-zero if has next. - */ - -static int ata_pio_complete (struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - u8 drv_stat; - - /* - * This is purely heuristic. This is a fast path. Sometimes when - * we enter, BSY will be cleared in a chk-status or two. If not, - * the drive is probably seeking or something. Snooze for a couple - * msecs, then chk-status again. If still busy, fall back to - * HSM_ST_LAST_POLL state. - */ - drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); - if (drv_stat & ATA_BUSY) { - msleep(2); - drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); - if (drv_stat & ATA_BUSY) { - ap->hsm_task_state = HSM_ST_LAST_POLL; - ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; - return 1; - } - } - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - drv_stat = ata_wait_idle(ap); - if (!ata_ok(drv_stat)) { - qc->err_mask |= __ac_err_mask(drv_stat); - ap->hsm_task_state = HSM_ST_ERR; - return 1; - } - - ap->hsm_task_state = HSM_ST_IDLE; - - WARN_ON(qc->err_mask); - ata_poll_qc_complete(qc); - - /* another command may start at this point */ - - return 0; -} - - /** * swap_buf_le16 - swap halves of 16-bit words in place * @buf: Buffer to swap @@ -3496,91 +3387,6 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) } } -/** - * ata_pio_first_block - Write first data block to hardware - * @ap: Port to which ATA/ATAPI device is attached. - * - * When device has indicated its readiness to accept - * the data, this function sends out the CDB or - * the first data block by PIO. - * After this, - * - If polling, ata_pio_task() handles the rest. - * - Otherwise, interrupt handler takes over. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * Zero if irq handler takes over - * Non-zero if has next (polling). - */ - -static int ata_pio_first_block(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - u8 status; - unsigned long flags; - int has_next; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); - - /* if polling, we will stay in the work queue after sending the data. - * otherwise, interrupt handler takes over after sending the data. - */ - has_next = (qc->tf.flags & ATA_TFLAG_POLLING); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) { - qc->err_mask |= AC_ERR_TIMEOUT; - ap->hsm_task_state = HSM_ST_TMOUT; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - /* device status error */ - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto err_out; - } - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sectors() might change the state to HSM_ST_LAST. - * so, the state is changed here before ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sectors(qc); - ata_altstatus(ap); /* flush */ - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - return has_next; - -err_out: - return 1; /* has next */ -} - /** * __atapi_pio_bytes - Transfer data from/to the ATAPI device. * @qc: Command on going @@ -3720,91 +3526,6 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_ERR; } -/** - * ata_pio_block - start PIO on a block - * @ap: the target ata_port - * - * LOCKING: - * None. (executing in kernel thread context) - */ - -static void ata_pio_block(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - u8 status; - - /* - * This is purely heuristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, fall back to - * HSM_ST_POLL state. - */ - status = ata_busy_wait(ap, ATA_BUSY, 5); - if (status & ATA_BUSY) { - msleep(2); - status = ata_busy_wait(ap, ATA_BUSY, 10); - if (status & ATA_BUSY) { - ap->hsm_task_state = HSM_ST_POLL; - ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; - return; - } - } - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - /* check error */ - if (status & (ATA_ERR | ATA_DF)) { - qc->err_mask |= AC_ERR_DEV; - ap->hsm_task_state = HSM_ST_ERR; - return; - } - - /* transfer data if any */ - if (is_atapi_taskfile(&qc->tf)) { - /* DRQ=0 means no more data to transfer */ - if ((status & ATA_DRQ) == 0) { - ap->hsm_task_state = HSM_ST_LAST; - return; - } - - atapi_pio_bytes(qc); - } else { - /* handle BSY=0, DRQ=0 as error */ - if ((status & ATA_DRQ) == 0) { - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - return; - } - - ata_pio_sectors(qc); - } - - ata_altstatus(ap); /* flush */ -} - -static void ata_pio_error(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_WARNING "ata%u: PIO error\n", ap->id); - - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - - ata_poll_qc_complete(qc); -} - /** * ata_hsm_move - move the HSM to the next state. * @ap: the target ata_port diff --git a/include/linux/libata.h b/include/linux/libata.h index 70ca99bbc6c7..0eb71c1773a1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -162,13 +162,8 @@ enum { ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */ /* various lengths of time */ - ATA_TMOUT_PIO = 30 * HZ, ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */ - ATA_TMOUT_DATAOUT = 30 * HZ, - ATA_TMOUT_DATAOUT_QUICK = 5 * HZ, - ATA_TMOUT_CDB = 30 * HZ, - ATA_TMOUT_CDB_QUICK = 5 * HZ, ATA_TMOUT_INTERNAL = 30 * HZ, ATA_TMOUT_INTERNAL_QUICK = 5 * HZ, @@ -216,11 +211,8 @@ enum { enum hsm_task_states { HSM_ST_UNKNOWN, /* state unknown */ HSM_ST_IDLE, /* no command on going */ - HSM_ST_POLL, /* same as HSM_ST, waits longer */ - HSM_ST_TMOUT, /* timeout */ HSM_ST, /* (waiting the device to) transfer data */ HSM_ST_LAST, /* (waiting the device to) complete command */ - HSM_ST_LAST_POLL, /* same as HSM_ST_LAST, waits longer */ HSM_ST_ERR, /* error */ HSM_ST_FIRST, /* (waiting the device to) write CDB or first data block */ @@ -409,7 +401,6 @@ struct ata_port { struct work_struct port_task; unsigned int hsm_task_state; - unsigned long pio_task_timeout; u32 msg_enable; struct list_head eh_done_q; From c2bbc551615c21a4c280c797987dbb50f2701594 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:56:55 +0800 Subject: [PATCH 043/258] [PATCH] libata-dev: ata_check_atapi_dma() fix for ATA_FLAG_PIO_POLLING LLDDs ata_check_atapi_dma() fix for LLDDs with the ATA_FLAG_PIO_POLLING flag. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ef0d0dd90e17..61c120dae74d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2883,6 +2883,15 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) if (ap->ops->check_atapi_dma) rc = ap->ops->check_atapi_dma(qc); + /* We don't support polling DMA. + * Use PIO if the LLDD handles only interrupts in + * the HSM_ST_LAST state and the ATAPI device + * generates CDB interrupts. + */ + if ((ap->flags & ATA_FLAG_PIO_POLLING) && + (qc->dev->flags & ATA_DFLAG_CDB_INTR)) + rc = 1; + return rc; } /** @@ -4038,6 +4047,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI_DMA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + /* see ata_check_atapi_dma() */ BUG(); break; default: From c234fb00ea8999076728137d96603b713ad8b53f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 17:58:38 +0800 Subject: [PATCH 044/258] [PATCH] libata-dev: Make the the in_wq check as an inline function Make the the in_wq check easier to read as an inline function. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 61c120dae74d..27078c06119a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3535,6 +3535,33 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_ERR; } +/** + * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. + * @ap: the target ata_port + * @qc: qc on going + * + * RETURNS: + * 1 if ok in workqueue, 0 otherwise. + */ + +static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return 1; + + if (ap->hsm_task_state == HSM_ST_FIRST) { + if (qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) + return 1; + + if (is_atapi_taskfile(&qc->tf) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + } + + return 0; +} + /** * ata_hsm_move - move the HSM to the next state. * @ap: the target ata_port @@ -3558,12 +3585,7 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, * like DMA polling into the workqueue. Notice that * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). */ - WARN_ON(in_wq != ((qc->tf.flags & ATA_TFLAG_POLLING) || - (ap->hsm_task_state == HSM_ST_FIRST && - ((qc->tf.protocol == ATA_PROT_PIO && - (qc->tf.flags & ATA_TFLAG_WRITE)) || - (is_atapi_taskfile(&qc->tf) && - !(qc->dev->flags & ATA_DFLAG_CDB_INTR)))))); + WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); /* check error */ if (unlikely(status & (ATA_ERR | ATA_DF))) { From 999bb6f4260f9499fdeab3f8fdcd8b9013eca39e Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 18:07:48 +0800 Subject: [PATCH 045/258] [PATCH] libata-dev: irq-pio minor fixes (respin) irq-pio minor fixes for printk() and comments. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 27078c06119a..d68f5d5b423a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1295,7 +1295,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, if (dev->id[59] & 0x100) { dev->multi_count = dev->id[59] & 0xff; DPRINTK("ata%u: dev %u multi count %u\n", - ap->id, device, dev->multi_count); + ap->id, dev->devno, dev->multi_count); } dev->cdb_len = 16; @@ -3594,6 +3594,9 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, } fsm_start: + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, ap->hsm_task_state, status); + switch (ap->hsm_task_state) { case HSM_ST_FIRST: /* Send first data block or PACKET CDB */ @@ -3720,6 +3723,7 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, ap->hsm_task_state = HSM_ST_IDLE; + /* complete taskfile transaction */ if (in_wq) ata_poll_qc_complete(qc); else @@ -4241,9 +4245,6 @@ inline unsigned int ata_host_intr (struct ata_port *ap, if (unlikely(status & ATA_BUSY)) goto idle_irq; - DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, ap->hsm_task_state, status); - /* ack bmdma irq events */ ap->ops->irq_clear(ap); From 71601958f73b952281f2b02e16d1f11c99ee0a8b Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 18:11:12 +0800 Subject: [PATCH 046/258] [PATCH] libata-dev: fix the device err check sequence (respin) Current irq-pio checks ERR bit and stops on ERR before it does anything else. This behavior doesn't look right. The DRQ bit should take higher precedence than the ERR bit. Changes: - Let the HSM do the data transfer whenever the device asks for DRQ bit, even if the ERR bit is set. - For DRQ=1 ERR=1, don't trust the data Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 44 ++++++++++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d68f5d5b423a..59cb12993f95 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3587,12 +3587,6 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, */ WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); - /* check error */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - qc->err_mask |= AC_ERR_DEV; - ap->hsm_task_state = HSM_ST_ERR; - } - fsm_start: DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", ap->id, qc->tf.protocol, ap->hsm_task_state, status); @@ -3615,6 +3609,17 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, goto fsm_start; } + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * Anyway, we respect DRQ here and let HSM go on + * without changing hsm_task_state to HSM_ST_ERR. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_DEV; + } + /* Send the CDB (atapi) or the first data block (ata pio out). * During the state transition, interrupt handler shouldn't * be invoked before the data transfer is complete and @@ -3657,6 +3662,17 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, goto fsm_start; } + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * Anyway, we respect DRQ here and let HSM go on + * without changing hsm_task_state to HSM_ST_ERR. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_DEV; + } + atapi_pio_bytes(qc); if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) @@ -3672,6 +3688,22 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, goto fsm_start; } + /* Some devices may ask for data transfer (DRQ=1) + * alone with ERR=1 for PIO reads. + * We respect DRQ here and let HSM go on without + * changing hsm_task_state to HSM_ST_ERR. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* For writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + WARN_ON(qc->tf.flags & ATA_TFLAG_WRITE); + + /* data might be corrputed */ + qc->err_mask |= AC_ERR_DEV; + } + ata_pio_sectors(qc); if (ap->hsm_task_state == HSM_ST_LAST && From 52a3220599647ba429fcbca2388ec35b850fa72f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 25 Mar 2006 18:18:15 +0800 Subject: [PATCH 047/258] [PATCH] libata-dev: wait idle after reading the last data block Some CD-ROM drives are slow to clear DRQ, after the last data block is read by PIO. Use ata_wait_idle() after reading the last data block. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 59cb12993f95..5fdc3143ed15 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3710,7 +3710,7 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, (!(qc->tf.flags & ATA_TFLAG_WRITE))) { /* all data read */ ata_altstatus(ap); - status = ata_chk_status(ap); + status = ata_wait_idle(ap); goto fsm_start; } } From 08a556db919f67e1e4d33ae8d40f7222da34d994 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 31 Mar 2006 13:29:04 +0800 Subject: [PATCH 048/258] [PATCH] libata-dev: print out information for ATAPI devices with CDB interrupts print out information for ATAPI devices with CDB interrupts Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a14187e32d0a..f18742e8d72d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1305,6 +1305,8 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { + char *cdb_intr_string = ""; + rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); @@ -1313,13 +1315,16 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, } dev->cdb_len = (unsigned int) rc; - if (ata_id_cdb_intr(dev->id)) + if (ata_id_cdb_intr(dev->id)) { dev->flags |= ATA_DFLAG_CDB_INTR; + cdb_intr_string = ", CDB intr"; + } /* print device info to dmesg */ if (print_info) - printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, dev->devno, ata_mode_string(xfer_mask)); + printk(KERN_INFO "ata%u: dev %u ATAPI, max %s%s\n", + ap->id, dev->devno, ata_mode_string(xfer_mask), + cdb_intr_string); } ap->host->max_cmd_len = 0; From 5bbc53f4cfd28bf1d0e476ed23bc3a094eff718a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:17 +0900 Subject: [PATCH 049/258] [PATCH] libata: fix ata_set_mode() return value Make ata_set_mode() return correct error value when ata_dev_set_mode() fails. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e63c1ff1e102..8def7a5e436a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1856,7 +1856,8 @@ static void ata_set_mode(struct ata_port *ap) if (!ata_dev_present(dev)) continue; - if (ata_dev_set_mode(ap, dev)) + rc = ata_dev_set_mode(ap, dev); + if (rc) goto err_out; } From 96072e699be08af8e7c33c56759582ea89088a02 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:17 +0900 Subject: [PATCH 050/258] [PATCH] libata: make ata_bus_probe() return negative errno on failure ata_bus_probe() uses unsigned int rc to receive negative errno and returns the converted unsigned int value. Convert temporary variables to int and make ata_bus_probe() return negative errno on failure. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8def7a5e436a..c7ba523fb1eb 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1349,13 +1349,13 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, * PCI/etc. bus probe sem. * * RETURNS: - * Zero on success, non-zero on error. + * Zero on success, negative errno otherwise. */ static int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; - unsigned int i, rc, found = 0; + int i, rc, found = 0; ata_port_probe(ap); @@ -1421,7 +1421,7 @@ static int ata_bus_probe(struct ata_port *ap) err_out_disable: ap->ops->port_disable(ap); - return -1; + return -ENODEV; } /** From 4c360c81a6f8d4253f7fc2e69852305676fdfa72 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:17 +0900 Subject: [PATCH 051/258] [PATCH] libata: separate out ata_spd_string() Separate out ata_spd_string() from sata_print_link_status(). This will be used by SATA spd configuration routines. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c7ba523fb1eb..6a336babf88b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -397,6 +397,18 @@ static const char *ata_mode_string(unsigned int xfer_mask) return ""; } +static const char *sata_spd_string(unsigned int spd) +{ + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + }; + + if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) + return ""; + return spd_str[spd - 1]; +} + static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) { if (ata_dev_present(dev)) { @@ -1452,7 +1464,6 @@ void ata_port_probe(struct ata_port *ap) static void sata_print_link_status(struct ata_port *ap) { u32 sstatus, tmp; - const char *speed; if (!ap->ops->scr_read) return; @@ -1461,14 +1472,8 @@ static void sata_print_link_status(struct ata_port *ap) if (sata_dev_present(ap)) { tmp = (sstatus >> 4) & 0xf; - if (tmp & (1 << 0)) - speed = "1.5"; - else if (tmp & (1 << 1)) - speed = "3.0"; - else - speed = ""; - printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", - ap->id, speed, sstatus); + printk(KERN_INFO "ata%u: SATA link up %s (SStatus %X)\n", + ap->id, sata_spd_string(tmp), sstatus); } else { printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", ap->id, sstatus); From 9974e7cc6c8b8ea796c92cdf28db93e4579a4000 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:17 +0900 Subject: [PATCH 052/258] [PATCH] libata: convert do_probe_reset() to ata_do_reset() Make do_probe_reset() generic by pushing classification check into ata_drive_probe_reset() and rename it to ata_do_reset(). This will be used by EH reset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 6a336babf88b..559abe4ea4e9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2371,16 +2371,16 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) ata_std_postreset, classes); } -static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, - ata_postreset_fn_t postreset, - unsigned int *classes) +static int ata_do_reset(struct ata_port *ap, + ata_reset_fn_t reset, ata_postreset_fn_t postreset, + int verbose, unsigned int *classes) { int i, rc; for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ATA_DEV_UNKNOWN; - rc = reset(ap, 0, classes); + rc = reset(ap, verbose, classes); if (rc) return rc; @@ -2400,7 +2400,7 @@ static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, if (postreset) postreset(ap, classes); - return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV; + return 0; } /** @@ -2445,21 +2445,24 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, probeinit(ap); if (softreset) { - rc = do_probe_reset(ap, softreset, postreset, classes); - if (rc == 0) - return 0; + rc = ata_do_reset(ap, softreset, postreset, 0, classes); + if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) + goto done; } if (!hardreset) - return rc; + goto done; - rc = do_probe_reset(ap, hardreset, postreset, classes); - if (rc == 0 || rc != -ENODEV) - return rc; + rc = ata_do_reset(ap, hardreset, postreset, 0, classes); + if (rc || classes[0] != ATA_DEV_UNKNOWN) + goto done; if (softreset) - rc = do_probe_reset(ap, softreset, postreset, classes); + rc = ata_do_reset(ap, softreset, postreset, 0, classes); + done: + if (rc == 0 && classes[0] == ATA_DEV_UNKNOWN) + rc = -ENODEV; return rc; } From e1211e3fa7fd05ff0d4f597fd37e40de8acc6784 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:18 +0900 Subject: [PATCH 053/258] [PATCH] libata: implement ata_dev_enabled and disabled() This patch renames ata_dev_present() to ata_dev_enabled() and adds ata_dev_disabled(). This is to discern the state where a device is present but disabled from not-present state. This disctinction is necessary when configuring transfer mode because device selection timing must not be violated even if a device fails to configure. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 24 ++++++++++++------------ drivers/scsi/libata-scsi.c | 4 ++-- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_sil.c | 2 +- include/linux/libata.h | 16 +++++++++++++--- 5 files changed, 29 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 559abe4ea4e9..c10c550da38b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -411,7 +411,7 @@ static const char *sata_spd_string(unsigned int spd) static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) { - if (ata_dev_present(dev)) { + if (ata_dev_enabled(dev)) { printk(KERN_WARNING "ata%u: dev %u disabled\n", ap->id, dev->devno); dev->class++; @@ -1222,7 +1222,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, unsigned int xfer_mask; int i, rc; - if (!ata_dev_present(dev)) { + if (!ata_dev_enabled(dev)) { DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", ap->id, dev->devno); return 0; @@ -1401,7 +1401,7 @@ static int ata_bus_probe(struct ata_port *ap) dev->class = classes[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) continue; WARN_ON(dev->id != NULL); @@ -1565,7 +1565,7 @@ void sata_phy_reset(struct ata_port *ap) struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev) { struct ata_device *pair = &ap->device[1 - adev->devno]; - if (!ata_dev_present(pair)) + if (!ata_dev_enabled(pair)) return NULL; return pair; } @@ -1778,7 +1778,7 @@ static int ata_host_set_pio(struct ata_port *ap) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) continue; if (!dev->pio_mode) { @@ -1802,7 +1802,7 @@ static void ata_host_set_dma(struct ata_port *ap) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (!ata_dev_present(dev) || !dev->dma_mode) + if (!ata_dev_enabled(dev) || !dev->dma_mode) continue; dev->xfer_mode = dev->dma_mode; @@ -1830,7 +1830,7 @@ static void ata_set_mode(struct ata_port *ap) struct ata_device *dev = &ap->device[i]; unsigned int pio_mask, dma_mask; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) continue; ata_dev_xfermask(ap, dev); @@ -1858,7 +1858,7 @@ static void ata_set_mode(struct ata_port *ap) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) continue; rc = ata_dev_set_mode(ap, dev); @@ -2550,7 +2550,7 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, u16 *id; int rc; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) return -ENODEV; class = dev->class; @@ -2679,7 +2679,7 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) /* FIXME: Use port-wide xfermask for now */ for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *d = &ap->device[i]; - if (!ata_dev_present(d)) + if (!ata_dev_enabled(d)) continue; xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask, d->udma_mask); @@ -4299,7 +4299,7 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev) ap->flags &= ~ATA_FLAG_SUSPENDED; ata_set_mode(ap); } - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) return 0; if (dev->class == ATA_DEV_ATA) ata_start_drive(ap, dev); @@ -4317,7 +4317,7 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev) */ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state) { - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) return 0; if (dev->class == ATA_DEV_ATA) ata_flush_cache(ap, dev); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 53f5b0d9161c..c1a4b29a9ae1 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2349,7 +2349,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) (scsidev->lun != 0))) return NULL; - if (unlikely(!ata_dev_present(dev))) + if (unlikely(!ata_dev_enabled(dev))) return NULL; if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) { @@ -2743,7 +2743,7 @@ void ata_scsi_scan_host(struct ata_port *ap) for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; - if (ata_dev_present(dev)) + if (ata_dev_enabled(dev)) scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); } } diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index fa901fd65085..0f7d334aadcc 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1991,7 +1991,7 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr); dev->class = ata_dev_classify(&tf); - if (!ata_dev_present(dev)) { + if (!ata_dev_enabled(dev)) { VPRINTK("Port disabled post-sig: No device present.\n"); ata_port_disable(ap); } diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 18c296c56899..d6c7086a5379 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -264,7 +264,7 @@ static void sil_post_set_mode (struct ata_port *ap) for (i = 0; i < 2; i++) { dev = &ap->device[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) dev_mode[i] = 0; /* PIO0/1/2 */ else if (dev->flags & ATA_DFLAG_PIO) dev_mode[i] = 1; /* PIO3/4 */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 0d61357604d5..c6883ba8cba9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -672,14 +672,24 @@ static inline unsigned int ata_tag_valid(unsigned int tag) return (tag < ATA_MAX_QUEUE) ? 1 : 0; } -static inline unsigned int ata_class_present(unsigned int class) +static inline unsigned int ata_class_enabled(unsigned int class) { return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI; } -static inline unsigned int ata_dev_present(const struct ata_device *dev) +static inline unsigned int ata_class_disabled(unsigned int class) { - return ata_class_present(dev->class); + return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP; +} + +static inline unsigned int ata_dev_enabled(const struct ata_device *dev) +{ + return ata_class_enabled(dev->class); +} + +static inline unsigned int ata_dev_disabled(const struct ata_device *dev) +{ + return ata_class_disabled(dev->class); } static inline u8 ata_chk_status(struct ata_port *ap) From 4f65977df0b9a667fdcd85b95d457a220c94113f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:18 +0900 Subject: [PATCH 054/258] [PATCH] libata: make ata_set_mode() handle no-device case properly Make ata_set_mode() return without doing anything if there is no device on the port. This is in preparation for ata_bus_probe() changes. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c10c550da38b..913e378eca7f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1823,7 +1823,7 @@ static void ata_host_set_dma(struct ata_port *ap) */ static void ata_set_mode(struct ata_port *ap) { - int i, rc, used_dma = 0; + int i, rc, used_dma = 0, found = 0; /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { @@ -1842,9 +1842,12 @@ static void ata_set_mode(struct ata_port *ap) dev->pio_mode = ata_xfer_mask2mode(pio_mask); dev->dma_mode = ata_xfer_mask2mode(dma_mask); + found = 1; if (dev->dma_mode) used_dma = 1; } + if (!found) + return; /* step 2: always set host PIO timings */ rc = ata_host_set_pio(ap); From e8e0619f68bff8f39d98c46aac85ed1d4557ccfd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:18 +0900 Subject: [PATCH 055/258] [PATCH] libata: reorganize ata_set_mode() Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 91 +++++++++++++++----------------------- 1 file changed, 35 insertions(+), 56 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 913e378eca7f..f04561abf6d8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1771,47 +1771,6 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) return 0; } -static int ata_host_set_pio(struct ata_port *ap) -{ - int i; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - - if (!ata_dev_enabled(dev)) - continue; - - if (!dev->pio_mode) { - printk(KERN_WARNING "ata%u: no PIO support for device %d.\n", ap->id, i); - return -1; - } - - dev->xfer_mode = dev->pio_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); - } - - return 0; -} - -static void ata_host_set_dma(struct ata_port *ap) -{ - int i; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - - if (!ata_dev_enabled(dev) || !dev->dma_mode) - continue; - - dev->xfer_mode = dev->dma_mode; - dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } -} - /** * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed @@ -1823,20 +1782,20 @@ static void ata_host_set_dma(struct ata_port *ap) */ static void ata_set_mode(struct ata_port *ap) { + struct ata_device *dev; int i, rc, used_dma = 0, found = 0; /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; unsigned int pio_mask, dma_mask; + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) continue; ata_dev_xfermask(ap, dev); - /* TODO: let LLDD filter dev->*_mask here */ - pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); dev->pio_mode = ata_xfer_mask2mode(pio_mask); @@ -1850,16 +1809,40 @@ static void ata_set_mode(struct ata_port *ap) return; /* step 2: always set host PIO timings */ - rc = ata_host_set_pio(ap); - if (rc) - goto err_out; + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) + continue; + + if (!dev->pio_mode) { + printk(KERN_WARNING "ata%u: dev %u no PIO support\n", + ap->id, dev->devno); + rc = -EINVAL; + goto err_out; + } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } /* step 3: set host DMA timings */ - ata_host_set_dma(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (!ata_dev_enabled(dev) || !dev->dma_mode) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); + } /* step 4: update devices' xfer mode */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + dev = &ap->device[i]; if (!ata_dev_enabled(dev)) continue; @@ -1869,17 +1852,13 @@ static void ata_set_mode(struct ata_port *ap) goto err_out; } - /* - * Record simplex status. If we selected DMA then the other - * host channels are not permitted to do so. + /* Record simplex status. If we selected DMA then the other + * host channels are not permitted to do so. */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) ap->host_set->simplex_claimed = 1; - /* - * Chip specific finalisation - */ + /* step5: chip specific finalisation */ if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); From eee6c32f5f114f9b9f2d94862f0dc0d3ff523864 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sat, 1 Apr 2006 17:38:43 +0800 Subject: [PATCH 056/258] [PATCH] libata-dev: handle DRQ=1 ERR=1 (revised) Handle DRQ=1 ERR=1 situation. Revised according to what IDE try_to_flush_leftover_data() does. Changes: - For ATA PIO writes and ATAPI devices, just stop the HSM and let EH handle it. - For ATA PIO reads, read only one block of junk data and then let EH handle it. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 46 ++++++++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 6fc25f60db97..da13deccc0e0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3640,13 +3640,16 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, /* Device should not ask for data transfer (DRQ=1) * when it finds something wrong. - * Anyway, we respect DRQ here and let HSM go on - * without changing hsm_task_state to HSM_ST_ERR. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", ap->id, status); qc->err_mask |= AC_ERR_DEV; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; } /* Send the CDB (atapi) or the first data block (ata pio out). @@ -3693,13 +3696,16 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, /* Device should not ask for data transfer (DRQ=1) * when it finds something wrong. - * Anyway, we respect DRQ here and let HSM go on - * without changing hsm_task_state to HSM_ST_ERR. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", ap->id, status); qc->err_mask |= AC_ERR_DEV; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; } atapi_pio_bytes(qc); @@ -3717,20 +3723,32 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, goto fsm_start; } - /* Some devices may ask for data transfer (DRQ=1) - * alone with ERR=1 for PIO reads. - * We respect DRQ here and let HSM go on without - * changing hsm_task_state to HSM_ST_ERR. + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* For writes, ERR=1 DRQ=1 doesn't make - * sense since the data block has been - * transferred to the device. - */ - WARN_ON(qc->tf.flags & ATA_TFLAG_WRITE); - /* data might be corrputed */ qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + ata_altstatus(ap); + status = ata_wait_idle(ap); + } + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; } ata_pio_sectors(qc); From e82cbdb9a3791f781462c9d00e3486e8fb7e58a8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:18 +0900 Subject: [PATCH 057/258] [PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 66 +++++++++++++++++++++++--------------- 1 file changed, 40 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f04561abf6d8..061b0b6544cc 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -65,7 +65,7 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, struct ata_device *dev, u16 heads, u16 sectors); -static void ata_set_mode(struct ata_port *ap); +static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); static unsigned int ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); @@ -1368,6 +1368,7 @@ static int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; int i, rc, found = 0; + struct ata_device *dev; ata_port_probe(ap); @@ -1397,8 +1398,7 @@ static int ata_bus_probe(struct ata_port *ap) /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - + dev = &ap->device[i]; dev->class = classes[i]; if (!ata_dev_enabled(dev)) @@ -1418,20 +1418,26 @@ static int ata_bus_probe(struct ata_port *ap) found = 1; } - if (!found) - goto err_out_disable; + /* configure transfer mode */ + if (ap->ops->set_mode) { + /* FIXME: make ->set_mode handle no device case and + * return error code and failing device on failure as + * ata_set_mode() does. + */ + if (found) + ap->ops->set_mode(ap); + rc = 0; + } else { + while (ata_set_mode(ap, &dev)) + ata_dev_disable(ap, dev); + } - if (ap->ops->set_mode) - ap->ops->set_mode(ap); - else - ata_set_mode(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + return 0; - if (ap->flags & ATA_FLAG_PORT_DISABLED) - goto err_out_disable; - - return 0; - -err_out_disable: + /* no device present, disable port */ + ata_port_disable(ap); ap->ops->port_disable(ap); return -ENODEV; } @@ -1774,16 +1780,22 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) /** * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed + * @r_failed_dev: out paramter for failed device * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. * * LOCKING: * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise */ -static void ata_set_mode(struct ata_port *ap) +static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) { struct ata_device *dev; - int i, rc, used_dma = 0, found = 0; + int i, rc = 0, used_dma = 0, found = 0; /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { @@ -1806,7 +1818,7 @@ static void ata_set_mode(struct ata_port *ap) used_dma = 1; } if (!found) - return; + goto out; /* step 2: always set host PIO timings */ for (i = 0; i < ATA_MAX_DEVICES; i++) { @@ -1818,7 +1830,7 @@ static void ata_set_mode(struct ata_port *ap) printk(KERN_WARNING "ata%u: dev %u no PIO support\n", ap->id, dev->devno); rc = -EINVAL; - goto err_out; + goto out; } dev->xfer_mode = dev->pio_mode; @@ -1849,7 +1861,7 @@ static void ata_set_mode(struct ata_port *ap) rc = ata_dev_set_mode(ap, dev); if (rc) - goto err_out; + goto out; } /* Record simplex status. If we selected DMA then the other @@ -1862,10 +1874,10 @@ static void ata_set_mode(struct ata_port *ap) if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - return; - -err_out: - ata_port_disable(ap); + out: + if (rc) + *r_failed_dev = dev; + return rc; } /** @@ -4278,8 +4290,10 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) int ata_device_resume(struct ata_port *ap, struct ata_device *dev) { if (ap->flags & ATA_FLAG_SUSPENDED) { + struct ata_device *failed_dev; ap->flags &= ~ATA_FLAG_SUSPENDED; - ata_set_mode(ap); + while (ata_set_mode(ap, &failed_dev)) + ata_dev_disable(ap, failed_dev); } if (!ata_dev_enabled(dev)) return 0; From 852ee16a914fb3ada2f81e222677c04defc2f15f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Apr 2006 01:38:18 +0900 Subject: [PATCH 058/258] [PATCH] libata: preserve SATA SPD setting over hard resets Don't overwrite SPD setting during hard reset. This change has the (intended) side effect of honoring the BIOS configuration. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 061b0b6544cc..3acf56200d87 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2132,9 +2132,11 @@ void ata_bus_reset(struct ata_port *ap) static int sata_phy_resume(struct ata_port *ap) { unsigned long timeout = jiffies + (HZ * 5); - u32 sstatus; + u32 scontrol, sstatus; - scr_write_flush(ap, SCR_CONTROL, 0x300); + scontrol = scr_read(ap, SCR_CONTROL); + scontrol = (scontrol & 0x0f0) | 0x300; + scr_write_flush(ap, SCR_CONTROL, scontrol); /* Wait for phy to become ready, if necessary. */ do { @@ -2247,10 +2249,14 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) */ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) { + u32 scontrol; + DPRINTK("ENTER\n"); /* Issue phy wake/reset */ - scr_write_flush(ap, SCR_CONTROL, 0x301); + scontrol = scr_read(ap, SCR_CONTROL); + scontrol = (scontrol & 0x0f0) | 0x301; + scr_write_flush(ap, SCR_CONTROL, scontrol); /* * Couldn't find anything in SATA I/II specs, but AHCI-1.1 From 002c8054fa8d0f1afce2b0c728be32d338b9293a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 17:54:46 +0900 Subject: [PATCH 059/258] [PATCH] libata: implement ata_dev_absent() For the time being we cannot use ata_dev_present() as it was renamed to ata_dev_enabled() but we still need presence test. Implement negation of the test. Conveniently, the negated result is needed in more places. This is suggested by Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/include/linux/libata.h b/include/linux/libata.h index c6883ba8cba9..0f8e3720edd9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -682,6 +682,11 @@ static inline unsigned int ata_class_disabled(unsigned int class) return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP; } +static inline unsigned int ata_class_absent(unsigned int class) +{ + return !ata_class_enabled(class) && !ata_class_disabled(class); +} + static inline unsigned int ata_dev_enabled(const struct ata_device *dev) { return ata_class_enabled(dev->class); @@ -692,6 +697,11 @@ static inline unsigned int ata_dev_disabled(const struct ata_device *dev) return ata_class_disabled(dev->class); } +static inline unsigned int ata_dev_absent(const struct ata_device *dev) +{ + return ata_class_absent(dev->class); +} + static inline u8 ata_chk_status(struct ata_port *ap) { return ap->ops->check_status(ap); From 1c3fae4d7eb121933341443c37d3bbee43c0fb68 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 20:53:28 +0900 Subject: [PATCH 060/258] [PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 143 +++++++++++++++++++++++++++++++++++-- include/linux/libata.h | 1 + 2 files changed, 140 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3acf56200d87..63488673765f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -65,6 +65,7 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, struct ata_device *dev, u16 heads, u16 sectors); +static int ata_down_sata_spd_limit(struct ata_port *ap); static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); static unsigned int ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); @@ -1596,6 +1597,120 @@ void ata_port_disable(struct ata_port *ap) ap->flags |= ATA_FLAG_PORT_DISABLED; } +/** + * ata_down_sata_spd_limit - adjust SATA spd limit downward + * @ap: Port to adjust SATA spd limit for + * + * Adjust SATA spd limit of @ap downward. Note that this + * function only adjusts the limit. The change must be applied + * using ata_set_sata_spd(). + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +static int ata_down_sata_spd_limit(struct ata_port *ap) +{ + u32 spd, mask; + int highbit; + + if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read) + return -EOPNOTSUPP; + + mask = ap->sata_spd_limit; + if (mask <= 1) + return -EINVAL; + highbit = fls(mask) - 1; + mask &= ~(1 << highbit); + + spd = (scr_read(ap, SCR_STATUS) >> 4) & 0xf; + if (spd <= 1) + return -EINVAL; + spd--; + mask &= (1 << spd) - 1; + if (!mask) + return -EINVAL; + + ap->sata_spd_limit = mask; + + printk(KERN_WARNING "ata%u: limiting SATA link speed to %s\n", + ap->id, sata_spd_string(fls(mask))); + + return 0; +} + +static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) +{ + u32 spd, limit; + + if (ap->sata_spd_limit == UINT_MAX) + limit = 0; + else + limit = fls(ap->sata_spd_limit); + + spd = (*scontrol >> 4) & 0xf; + *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); + + return spd != limit; +} + +/** + * ata_set_sata_spd_needed - is SATA spd configuration needed + * @ap: Port in question + * + * Test whether the spd limit in SControl matches + * @ap->sata_spd_limit. This function is used to determine + * whether hardreset is necessary to apply SATA spd + * configuration. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if SATA spd configuration is needed, 0 otherwise. + */ +static int ata_set_sata_spd_needed(struct ata_port *ap) +{ + u32 scontrol; + + if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read) + return 0; + + scontrol = scr_read(ap, SCR_CONTROL); + + return __ata_set_sata_spd_needed(ap, &scontrol); +} + +/** + * ata_set_sata_spd - set SATA spd according to spd limit + * @ap: Port to set SATA spd for + * + * Set SATA spd of @ap according to sata_spd_limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 if spd doesn't need to be changed, 1 if spd has been + * changed. -EOPNOTSUPP if SCR registers are inaccessible. + */ +static int ata_set_sata_spd(struct ata_port *ap) +{ + u32 scontrol; + + if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read) + return -EOPNOTSUPP; + + scontrol = scr_read(ap, SCR_CONTROL); + if (!__ata_set_sata_spd_needed(ap, &scontrol)) + return 0; + + scr_write(ap, SCR_CONTROL, scontrol); + return 1; +} + /* * This mode timing computation functionality is ported over from * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik @@ -2165,7 +2280,14 @@ static int sata_phy_resume(struct ata_port *ap) void ata_std_probeinit(struct ata_port *ap) { if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) { + u32 spd; + sata_phy_resume(ap); + + spd = (scr_read(ap, SCR_CONTROL) & 0xf0) >> 4; + if (spd) + ap->sata_spd_limit &= (1 << spd) - 1; + if (sata_dev_present(ap)) ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); } @@ -2253,18 +2375,30 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) DPRINTK("ENTER\n"); - /* Issue phy wake/reset */ + if (ata_set_sata_spd_needed(ap)) { + /* SATA spec says nothing about how to reconfigure + * spd. To be on the safe side, turn off phy during + * reconfiguration. This works for at least ICH7 AHCI + * and Sil3124. + */ + scontrol = scr_read(ap, SCR_CONTROL); + scontrol = (scontrol & 0x0f0) | 0x302; + scr_write_flush(ap, SCR_CONTROL, scontrol); + + ata_set_sata_spd(ap); + } + + /* issue phy wake/reset */ scontrol = scr_read(ap, SCR_CONTROL); scontrol = (scontrol & 0x0f0) | 0x301; scr_write_flush(ap, SCR_CONTROL, scontrol); - /* - * Couldn't find anything in SATA I/II specs, but AHCI-1.1 + /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. */ msleep(1); - /* Bring phy back */ + /* bring phy back */ sata_phy_resume(ap); /* TODO: phy layer with polling, timeouts, etc. */ @@ -4454,6 +4588,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->flags |= ent->host_flags; ap->ops = ent->port_ops; ap->cbl = ATA_CBL_NONE; + ap->sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; diff --git a/include/linux/libata.h b/include/linux/libata.h index 0f8e3720edd9..a5207e66ca52 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -397,6 +397,7 @@ struct ata_port { unsigned int mwdma_mask; unsigned int udma_mask; unsigned int cbl; /* cable type; ATA_CBL_xxx */ + unsigned int sata_spd_limit; /* SATA PHY speed limit */ struct ata_device device[ATA_MAX_DEVICES]; From 90dac02c08dabd471927f151b8393eb51e3e020e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 17:54:46 +0900 Subject: [PATCH 061/258] [PATCH] libata: use SATA speed down in ata_drive_probe_reset() Make ata_drive_probe_reset() use SATA SPD configuration. Hardreset will be force if speed renegotiation is necessary. Also, if a hardreset fails, PHY speed is stepped down and hardreset is retried until the lowest speed is reached. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 63488673765f..4fd24075afd2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2578,7 +2578,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (probeinit) probeinit(ap); - if (softreset) { + if (softreset && !ata_set_sata_spd_needed(ap)) { rc = ata_do_reset(ap, softreset, postreset, 0, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; @@ -2587,9 +2587,17 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (!hardreset) goto done; - rc = ata_do_reset(ap, hardreset, postreset, 0, classes); - if (rc || classes[0] != ATA_DEV_UNKNOWN) - goto done; + while (1) { + rc = ata_do_reset(ap, hardreset, postreset, 0, classes); + if (rc == 0) { + if (classes[0] != ATA_DEV_UNKNOWN) + goto done; + break; + } + + if (ata_down_sata_spd_limit(ap)) + goto done; + } if (softreset) rc = ata_do_reset(ap, softreset, postreset, 0, classes); From edbabd8679a39faef67def4438c9cbccb5c05c5d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 20:55:02 +0900 Subject: [PATCH 062/258] [PATCH] libata: add 5s sleep between resets Some devices react badly if resets are performed back-to-back. Give devices some time to breath and tell user that we're taking a nap. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4fd24075afd2..3ddfbe1b86c6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2582,6 +2582,9 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, rc = ata_do_reset(ap, softreset, postreset, 0, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; + printk(KERN_INFO "ata%u: softreset failed, will try " + "hardreset in 5 secs\n", ap->id); + ssleep(5); } if (!hardreset) @@ -2597,10 +2600,20 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (ata_down_sata_spd_limit(ap)) goto done; + + printk(KERN_INFO "ata%u: hardreset failed, will retry " + "in 5 secs\n", ap->id); + ssleep(5); } - if (softreset) + if (softreset) { + printk(KERN_INFO "ata%u: hardreset succeeded without " + "classification, will retry softreset in 5 secs\n", + ap->id); + ssleep(5); + rc = ata_do_reset(ap, softreset, postreset, 0, classes); + } done: if (rc == 0 && classes[0] == ATA_DEV_UNKNOWN) From cf176e1aa92eb2a3faea8409e841396a66413937 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 17:54:46 +0900 Subject: [PATCH 063/258] [PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 52 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3ddfbe1b86c6..68fa64d24721 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -65,6 +65,8 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, struct ata_device *dev, u16 heads, u16 sectors); +static int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, + int force_pio0); static int ata_down_sata_spd_limit(struct ata_port *ap); static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); static unsigned int ata_dev_set_xfermode(struct ata_port *ap, @@ -1859,6 +1861,56 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } +/** + * ata_down_xfermask_limit - adjust dev xfer masks downward + * @ap: Port associated with device @dev + * @dev: Device to adjust xfer masks + * @force_pio0: Force PIO0 + * + * Adjust xfer masks of @dev downward. Note that this function + * does not apply the change. Invoking ata_set_mode() afterwards + * will apply the limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +static int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, + int force_pio0) +{ + unsigned long xfer_mask; + int highbit; + + xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, + dev->udma_mask); + + if (!xfer_mask) + goto fail; + /* don't gear down to MWDMA from UDMA, go directly to PIO */ + if (xfer_mask & ATA_MASK_UDMA) + xfer_mask &= ~ATA_MASK_MWDMA; + + highbit = fls(xfer_mask) - 1; + xfer_mask &= ~(1 << highbit); + if (force_pio0) + xfer_mask &= 1 << ATA_SHIFT_PIO; + if (!xfer_mask) + goto fail; + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, + &dev->udma_mask); + + printk(KERN_WARNING "ata%u: dev %u limiting speed to %s\n", + ap->id, dev->devno, ata_mode_string(xfer_mask)); + + return 0; + + fail: + return -EINVAL; +} + static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) { unsigned int err_mask; From 14d2bac1877ed4e2cc940d1680db1a4f29225811 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 17:54:46 +0900 Subject: [PATCH 064/258] [PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 65 ++++++++++++++++++++++++++++---------- include/linux/libata.h | 3 ++ 2 files changed, 52 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 68fa64d24721..33b5bff58cc3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1370,11 +1370,18 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, static int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; - int i, rc, found = 0; + int tries[ATA_MAX_DEVICES]; + int i, rc, down_xfermask; struct ata_device *dev; ata_port_probe(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) + tries[i] = ATA_PROBE_MAX_TRIES; + + retry: + down_xfermask = 0; + /* reset and determine device classes */ for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ATA_DEV_UNKNOWN; @@ -1404,21 +1411,23 @@ static int ata_bus_probe(struct ata_port *ap) dev = &ap->device[i]; dev->class = classes[i]; + if (!tries[i]) { + ata_down_xfermask_limit(ap, dev, 1); + ata_dev_disable(ap, dev); + } + if (!ata_dev_enabled(dev)) continue; - WARN_ON(dev->id != NULL); - if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) { - dev->class = ATA_DEV_NONE; - continue; - } + kfree(dev->id); + dev->id = NULL; + rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id); + if (rc) + goto fail; - if (ata_dev_configure(ap, dev, 1)) { - ata_dev_disable(ap, dev); - continue; - } - - found = 1; + rc = ata_dev_configure(ap, dev, 1); + if (rc) + goto fail; } /* configure transfer mode */ @@ -1427,12 +1436,18 @@ static int ata_bus_probe(struct ata_port *ap) * return error code and failing device on failure as * ata_set_mode() does. */ - if (found) - ap->ops->set_mode(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) { + ap->ops->set_mode(ap); + break; + } rc = 0; } else { - while (ata_set_mode(ap, &dev)) - ata_dev_disable(ap, dev); + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto fail; + } } for (i = 0; i < ATA_MAX_DEVICES; i++) @@ -1443,6 +1458,24 @@ static int ata_bus_probe(struct ata_port *ap) ata_port_disable(ap); ap->ops->port_disable(ap); return -ENODEV; + + fail: + switch (rc) { + case -EINVAL: + case -ENODEV: + tries[dev->devno] = 0; + break; + case -EIO: + ata_down_sata_spd_limit(ap); + /* fall through */ + default: + tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(ap, dev, tries[dev->devno] == 1)) + tries[dev->devno] = 0; + } + + goto retry; } /** diff --git a/include/linux/libata.h b/include/linux/libata.h index a5207e66ca52..a4a1e6304e78 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -211,6 +211,9 @@ enum { /* Masks for port functions */ ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), + + /* how hard are we gonna try to probe/recover devices */ + ATA_PROBE_MAX_TRIES = 3, }; enum hsm_task_states { From 565083e1f14e7771aa6bac2d3d4aae0b08d48d78 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 17:54:47 +0900 Subject: [PATCH 065/258] [PATCH] libata: consider disabled devices in ata_dev_xfermask() ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 33b5bff58cc3..00018705582b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2913,23 +2913,34 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) unsigned long xfer_mask; int i; - xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, - ap->udma_mask); + xfer_mask = ata_pack_xfermask(ap->pio_mask, + ap->mwdma_mask, ap->udma_mask); + + /* Apply cable rule here. Don't apply it early because when + * we handle hot plug the cable type can itself change. + */ + if (ap->cbl == ATA_CBL_PATA40) + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); /* FIXME: Use port-wide xfermask for now */ for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *d = &ap->device[i]; - if (!ata_dev_enabled(d)) + + if (ata_dev_absent(d)) continue; - xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask, - d->udma_mask); + + if (ata_dev_disabled(d)) { + /* to avoid violating device selection timing */ + xfer_mask &= ata_pack_xfermask(d->pio_mask, + UINT_MAX, UINT_MAX); + continue; + } + + xfer_mask &= ata_pack_xfermask(d->pio_mask, + d->mwdma_mask, d->udma_mask); xfer_mask &= ata_id_xfermask(d->id); if (ata_dma_blacklisted(d)) xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - /* Apply cable rule here. Don't apply it early because when - we handle hot plug the cable type can itself change */ - if (ap->cbl == ATA_CBL_PATA40) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); } if (ata_dma_blacklisted(dev)) @@ -2940,11 +2951,12 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) if (hs->simplex_claimed) xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); } + if (ap->ops->mode_filter) xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, - &dev->udma_mask); + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, + &dev->mwdma_mask, &dev->udma_mask); } /** From d63cb4a6365aa161341fc365df1edc87cd00c9c0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:52 +0900 Subject: [PATCH 066/258] [PATCH] libata: report device number when PIO fails Report device number on PIO failure. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 00018705582b..15d6c24c8e54 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3909,7 +3909,8 @@ static void ata_pio_error(struct ata_port *ap) WARN_ON(qc == NULL); if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_WARNING "ata%u: PIO error\n", ap->id); + printk(KERN_WARNING "ata%u: dev %u PIO error\n", + ap->id, qc->dev->devno); /* make sure qc->err_mask is available to * know what's wrong and recover From 5eb45c02a9944e813a0b82457607557a1f2c64b5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:52 +0900 Subject: [PATCH 067/258] [PATCH] libata: ata_dev_revalidate() printk update Make sure ata_dev_revalidate() complains on failures and kill revalidation failure message printed from ata_dev_set_mode(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 15d6c24c8e54..f39352a3ac11 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1961,12 +1961,8 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) } rc = ata_dev_revalidate(ap, dev, 0); - if (rc) { - printk(KERN_ERR - "ata%u: failed to revalidate after set xfermode\n", - ap->id); + if (rc) return rc; - } DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", dev->xfer_shift, (int)dev->xfer_mode); @@ -2786,15 +2782,14 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, int post_reset) { - unsigned int class; - u16 *id; + unsigned int class = dev->class; + u16 *id = NULL; int rc; - if (!ata_dev_enabled(dev)) - return -ENODEV; - - class = dev->class; - id = NULL; + if (!ata_dev_enabled(dev)) { + rc = -ENODEV; + goto fail; + } /* allocate & read ID data */ rc = ata_dev_read_id(ap, dev, &class, post_reset, &id); @@ -2811,7 +2806,9 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, dev->id = id; /* configure device according to the new ID */ - return ata_dev_configure(ap, dev, 0); + rc = ata_dev_configure(ap, dev, 0); + if (rc == 0) + return 0; fail: printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", From c43c555c3a6db7f0b55fd9b66d7ecff16e827d4e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:52 +0900 Subject: [PATCH 068/258] [PATCH] libata: ATA_FLAG_IN_EH is not used, kill it Kill unused flag ATA_FLAG_IN_EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 19 +++++-------------- include/linux/libata.h | 1 - 2 files changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c1a4b29a9ae1..bcbf71e9895b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -779,31 +779,22 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) int ata_scsi_error(struct Scsi_Host *host) { - struct ata_port *ap; - unsigned long flags; + struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; DPRINTK("ENTER\n"); - ap = (struct ata_port *) &host->hostdata[0]; - - spin_lock_irqsave(&ap->host_set->lock, flags); - WARN_ON(ap->flags & ATA_FLAG_IN_EH); - ap->flags |= ATA_FLAG_IN_EH; - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - + /* synchronize with IRQ handler and port task */ + spin_unlock_wait(&ap->host_set->lock); ata_port_flush_task(ap); + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + ap->ops->eng_timeout(ap); WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); scsi_eh_flush_done_q(&ap->eh_done_q); - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_IN_EH; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - DPRINTK("EXIT\n"); return 0; } diff --git a/include/linux/libata.h b/include/linux/libata.h index a4a1e6304e78..e20b0bfbd5f2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -152,7 +152,6 @@ enum { ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */ ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* Flush port task */ - ATA_FLAG_IN_EH = (1 << 16), /* EH in progress */ ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ From 949b38af40a0b88b7267908b1554a45b97b5b737 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:52 +0900 Subject: [PATCH 069/258] [PATCH] libata: clean up constants * Reorder ATA_DFLAG_* such that feature flags determined by ata_dev_configure() are on lower bits. Reserve lower eight bits for this purpose and allocate dynamic flags from bit 8. * Reorder ATA_FLAG_* such that feature flags determined during driver initiailization are on bits 0:15, dynamic flags on 16:23 and LLDD specific flags on 24:31. * Kill trailing white space and lower-case an one line comment for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 53 ++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 25 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index e20b0bfbd5f2..b7488a31e320 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -120,9 +120,10 @@ enum { ATA_SHT_USE_CLUSTERING = 1, /* struct ata_device stuff */ - ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ - ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ - ATA_DFLAG_LBA = (1 << 2), /* device supports LBA */ + ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */ + ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ + + ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -132,32 +133,34 @@ enum { ATA_DEV_NONE = 5, /* no device */ /* struct ata_port flags */ - ATA_FLAG_SLAVE_POSS = (1 << 1), /* host supports slave dev */ + ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ /* (doesn't imply presence) */ - ATA_FLAG_PORT_DISABLED = (1 << 2), /* port is disabled, ignore it */ - ATA_FLAG_SATA = (1 << 3), - ATA_FLAG_NO_LEGACY = (1 << 4), /* no legacy mode check */ - ATA_FLAG_SRST = (1 << 5), /* (obsolete) use ATA SRST, not E.D.D. */ - ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */ - ATA_FLAG_SATA_RESET = (1 << 7), /* (obsolete) use COMRESET */ - ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ - ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once - * proper HSM is in place. */ - ATA_FLAG_DEBUGMSG = (1 << 10), - ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */ + ATA_FLAG_SATA = (1 << 1), + ATA_FLAG_NO_LEGACY = (1 << 2), /* no legacy mode check */ + ATA_FLAG_MMIO = (1 << 3), /* use MMIO, not PIO */ + ATA_FLAG_SRST = (1 << 4), /* (obsolete) use ATA SRST, not E.D.D. */ + ATA_FLAG_SATA_RESET = (1 << 5), /* (obsolete) use COMRESET */ + ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ + ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ + ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */ + ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */ - ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */ + ATA_FLAG_NOINTR = (1 << 16), /* FIXME: Remove this once + * proper HSM is in place. */ + ATA_FLAG_DEBUGMSG = (1 << 17), + ATA_FLAG_FLUSH_PORT_TASK = (1 << 18), /* flush port task */ - ATA_FLAG_PIO_LBA48 = (1 << 13), /* Host DMA engine is LBA28 only */ - ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */ + ATA_FLAG_PORT_DISABLED = (1 << 19), /* port is disabled, ignore it */ + ATA_FLAG_SUSPENDED = (1 << 20), /* port is suspended */ - ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* Flush port task */ + /* bits 24:31 of ap->flags are reserved for LLDD specific flags */ - ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ - ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ - ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */ + /* struct ata_queued_cmd flags */ + ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ + ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */ + ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */ ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, - ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */ + ATA_QCFLAG_EH_SCHEDULED = (1 << 3), /* EH scheduled */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */ @@ -206,8 +209,8 @@ enum { /* size of buffer to pad xfers ending on unaligned boundaries */ ATA_DMA_PAD_SZ = 4, ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE, - - /* Masks for port functions */ + + /* masks for port functions */ ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), From 198e0fed9e59461fc1890dd8b75ec72d14638873 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:52 +0900 Subject: [PATCH 070/258] [PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 18 +++++++++--------- drivers/scsi/libata-scsi.c | 2 +- drivers/scsi/pdc_adma.c | 4 ++-- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_promise.c | 2 +- drivers/scsi/sata_qstor.c | 4 ++-- drivers/scsi/sata_sil24.c | 2 +- drivers/scsi/sata_sx4.c | 2 +- drivers/scsi/sata_vsc.c | 2 +- include/linux/libata.h | 2 +- 11 files changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f39352a3ac11..53226b16355c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1045,7 +1045,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, * * Kill the following code as soon as those drivers are fixed. */ - if (ap->flags & ATA_FLAG_PORT_DISABLED) { + if (ap->flags & ATA_FLAG_DISABLED) { err_mask |= AC_ERR_SYSTEM; ata_port_probe(ap); } @@ -1395,7 +1395,7 @@ static int ata_bus_probe(struct ata_port *ap) } else { ap->ops->phy_reset(ap); - if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + if (!(ap->flags & ATA_FLAG_DISABLED)) for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ap->device[i].class; @@ -1491,7 +1491,7 @@ static int ata_bus_probe(struct ata_port *ap) void ata_port_probe(struct ata_port *ap) { - ap->flags &= ~ATA_FLAG_PORT_DISABLED; + ap->flags &= ~ATA_FLAG_DISABLED; } /** @@ -1565,7 +1565,7 @@ void __sata_phy_reset(struct ata_port *ap) else ata_port_disable(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) + if (ap->flags & ATA_FLAG_DISABLED) return; if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { @@ -1590,7 +1590,7 @@ void __sata_phy_reset(struct ata_port *ap) void sata_phy_reset(struct ata_port *ap) { __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) + if (ap->flags & ATA_FLAG_DISABLED) return; ata_bus_reset(ap); } @@ -1629,7 +1629,7 @@ void ata_port_disable(struct ata_port *ap) { ap->device[0].class = ATA_DEV_NONE; ap->device[1].class = ATA_DEV_NONE; - ap->flags |= ATA_FLAG_PORT_DISABLED; + ap->flags |= ATA_FLAG_DISABLED; } /** @@ -2251,7 +2251,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * Obtains host_set lock. * * SIDE EFFECTS: - * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. + * Sets ATA_FLAG_DISABLED if bus reset fails. */ void ata_bus_reset(struct ata_port *ap) @@ -4468,7 +4468,7 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); @@ -4689,7 +4689,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, host->unique_id = ata_unique_id++; host->max_cmd_len = 12; - ap->flags = ATA_FLAG_PORT_DISABLED; + ap->flags = ATA_FLAG_DISABLED; ap->id = host->unique_id; ap->host = host; ap->ctl = ATA_DEVCTL_OBS; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index bcbf71e9895b..096bdffbde11 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2728,7 +2728,7 @@ void ata_scsi_scan_host(struct ata_port *ap) struct ata_device *dev; unsigned int i; - if (ap->flags & ATA_FLAG_PORT_DISABLED) + if (ap->flags & ATA_FLAG_DISABLED) return; for (i = 0; i < ATA_MAX_DEVICES; i++) { diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 3c85c4b66e19..d64073dd028f 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -456,7 +456,7 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) continue; handled = 1; adma_enter_reg_mode(ap); - if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) + if (ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR)) continue; pp = ap->private_data; if (!pp || pp->state != adma_state_pkt) @@ -481,7 +481,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) for (port_no = 0; port_no < host_set->n_ports; ++port_no) { struct ata_port *ap; ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + if (ap && (!(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR)))) { struct ata_queued_cmd *qc; struct adma_port_priv *pp = ap->private_data; if (!pp || pp->state != adma_state_mmio) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 0f7d334aadcc..e9152f850003 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1397,7 +1397,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, } } - if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) + if (ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR)) continue; err_mask = ac_err_mask(ata_status); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index f77bf183dfab..72721ac482d8 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -280,7 +280,7 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index cc928c68a479..9557c7aa45e0 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -534,7 +534,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r ap = host_set->ports[i]; tmp = mask & (1 << (i + 1)); if (tmp && ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 9ffe1ef0d205..8ef042a09448 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -396,7 +396,7 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) sff1, sff0, port_no, sHST, sDST); handled = 1; if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + (ATA_FLAG_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_pkt) @@ -429,7 +429,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) struct ata_port *ap; ap = host_set->ports[port_no]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_mmio) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 068c98a4111b..c34f6dabf418 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -770,7 +770,7 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) if (status & (1 << i)) { struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { sil24_host_intr(host_set->ports[i]); handled++; } else diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index ae70f60c7c0d..3af28ef76fd9 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -834,7 +834,7 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); if (tmp && ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 836bbbb26ff2..cecc1f76256b 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -222,7 +222,7 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + (ATA_FLAG_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/include/linux/libata.h b/include/linux/libata.h index b7488a31e320..890262f44d0a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -150,7 +150,7 @@ enum { ATA_FLAG_DEBUGMSG = (1 << 17), ATA_FLAG_FLUSH_PORT_TASK = (1 << 18), /* flush port task */ - ATA_FLAG_PORT_DISABLED = (1 << 19), /* port is disabled, ignore it */ + ATA_FLAG_DISABLED = (1 << 19), /* port is disabled, ignore it */ ATA_FLAG_SUSPENDED = (1 << 20), /* port is suspended */ /* bits 24:31 of ap->flags are reserved for LLDD specific flags */ From ea1dd4e13010eb9dd5ffb4bfabbb472bc238bebb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 071/258] [PATCH] libata: clear only affected flags during ata_dev_configure() ata_dev_configure() should not clear dynamic device flags determined elsewhere. Lower eight bits are reserved for feature flags, define ATA_DFLAG_CFG_MASK and clear only those bits before configuring device. Without this patch, ATA_DFLAG_PIO gets turned off during revalidation making PIO mode unuseable. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- include/linux/libata.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 53226b16355c..985283cbcbdf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1241,7 +1241,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, id[84], id[85], id[86], id[87], id[88]); /* initialize to-be-configured parameters */ - dev->flags = 0; + dev->flags &= ~ATA_DFLAG_CFG_MASK; dev->max_sectors = 0; dev->cdb_len = 0; dev->n_sectors = 0; diff --git a/include/linux/libata.h b/include/linux/libata.h index 890262f44d0a..cbbc821fe22c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -122,6 +122,7 @@ enum { /* struct ata_device stuff */ ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */ ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ + ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ From e8384607d4f395985e3cc5f82d75fc73efc2ecf0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 072/258] [PATCH] libata: clear ATA_DFLAG_PIO before setting it ata_dev_set_mode() is now responsible for managing ATA_DFLAG_PIO. Clear it before setting it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 985283cbcbdf..007d18888045 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1949,6 +1949,7 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) unsigned int err_mask; int rc; + dev->flags &= ~ATA_DFLAG_PIO; if (dev->xfer_shift == ATA_SHIFT_PIO) dev->flags |= ATA_DFLAG_PIO; From 2719736779da2c7fbb17d3de16c817b429bfeb9c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 073/258] [PATCH] libata: add ATA_QCFLAG_IO Add a new qc flag ATA_QCFLAG_IO. This flag gets set for normal IO commands originating from SCSI midlayer. This information will be used by EH to determine transfer speed reconfiguration. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 1 + include/linux/libata.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 096bdffbde11..234e1cadb070 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1188,6 +1188,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm u64 block; u32 n_block; + qc->flags |= ATA_QCFLAG_IO; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || diff --git a/include/linux/libata.h b/include/linux/libata.h index cbbc821fe22c..a6d829cb0567 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -161,7 +161,8 @@ enum { ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */ ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */ ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, - ATA_QCFLAG_EH_SCHEDULED = (1 << 3), /* EH scheduled */ + ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ + ATA_QCFLAG_EH_SCHEDULED = (1 << 4), /* EH scheduled */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */ From c91af2c87e4048cdefcfc9f16fed8d728243c92d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 074/258] [PATCH] libata: pass qc around intead of ap during PIO The current code passes pointer to ap around and repeatedly performs ata_qc_from_tag() to access the ongoing qc. This is unnatural and makes EH synchronization cumbersome. Make PIO codes deal with qc instead of ap. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 71 ++++++++++++++------------------------ 1 file changed, 26 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 007d18888045..e9002a4174d0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3416,7 +3416,7 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc) /** * ata_pio_poll - poll using PIO, depending on current state - * @ap: the target ata_port + * @qc: qc in progress * * LOCKING: * None. (executing in kernel thread context) @@ -3424,17 +3424,13 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc) * RETURNS: * timeout value to use */ - -static unsigned long ata_pio_poll(struct ata_port *ap) +static unsigned long ata_pio_poll(struct ata_queued_cmd *qc) { - struct ata_queued_cmd *qc; + struct ata_port *ap = qc->ap; u8 status; unsigned int poll_state = HSM_ST_UNKNOWN; unsigned int reg_state = HSM_ST_UNKNOWN; - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - switch (ap->hsm_task_state) { case HSM_ST: case HSM_ST_POLL: @@ -3468,7 +3464,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) /** * ata_pio_complete - check if drive is busy or idle - * @ap: the target ata_port + * @qc: qc to complete * * LOCKING: * None. (executing in kernel thread context) @@ -3476,10 +3472,9 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * RETURNS: * Non-zero if qc completed, zero otherwise. */ - -static int ata_pio_complete (struct ata_port *ap) +static int ata_pio_complete(struct ata_queued_cmd *qc) { - struct ata_queued_cmd *qc; + struct ata_port *ap = qc->ap; u8 drv_stat; /* @@ -3500,9 +3495,6 @@ static int ata_pio_complete (struct ata_port *ap) } } - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { qc->err_mask |= __ac_err_mask(drv_stat); @@ -3838,15 +3830,14 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) /** * ata_pio_block - start PIO on a block - * @ap: the target ata_port + * @qc: qc to transfer block for * * LOCKING: * None. (executing in kernel thread context) */ - -static void ata_pio_block(struct ata_port *ap) +static void ata_pio_block(struct ata_queued_cmd *qc) { - struct ata_queued_cmd *qc; + struct ata_port *ap = qc->ap; u8 status; /* @@ -3868,9 +3859,6 @@ static void ata_pio_block(struct ata_port *ap) } } - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - /* check error */ if (status & (ATA_ERR | ATA_DF)) { qc->err_mask |= AC_ERR_DEV; @@ -3899,12 +3887,9 @@ static void ata_pio_block(struct ata_port *ap) } } -static void ata_pio_error(struct ata_port *ap) +static void ata_pio_error(struct ata_queued_cmd *qc) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); + struct ata_port *ap = qc->ap; if (qc->tf.command != ATA_CMD_PACKET) printk(KERN_WARNING "ata%u: dev %u PIO error\n", @@ -3922,7 +3907,8 @@ static void ata_pio_error(struct ata_port *ap) static void ata_pio_task(void *_data) { - struct ata_port *ap = _data; + struct ata_queued_cmd *qc = _data; + struct ata_port *ap = qc->ap; unsigned long timeout; int qc_completed; @@ -3935,33 +3921,33 @@ static void ata_pio_task(void *_data) return; case HSM_ST: - ata_pio_block(ap); + ata_pio_block(qc); break; case HSM_ST_LAST: - qc_completed = ata_pio_complete(ap); + qc_completed = ata_pio_complete(qc); break; case HSM_ST_POLL: case HSM_ST_LAST_POLL: - timeout = ata_pio_poll(ap); + timeout = ata_pio_poll(qc); break; case HSM_ST_TMOUT: case HSM_ST_ERR: - ata_pio_error(ap); + ata_pio_error(qc); return; } if (timeout) - ata_port_queue_task(ap, ata_pio_task, ap, timeout); + ata_port_queue_task(ap, ata_pio_task, qc, timeout); else if (!qc_completed) goto fsm_start; } /** * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. + * @_data: qc in progress * * When device has indicated its readiness to accept * a CDB, this function is called. Send the CDB. @@ -3972,17 +3958,12 @@ static void ata_pio_task(void *_data) * LOCKING: * Kernel thread context (may sleep) */ - static void atapi_packet_task(void *_data) { - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; + struct ata_queued_cmd *qc = _data; + struct ata_port *ap = qc->ap; u8 status; - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { @@ -4022,7 +4003,7 @@ static void atapi_packet_task(void *_data) /* PIO commands are handled by polling */ ap->hsm_task_state = HSM_ST; - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); } return; @@ -4328,26 +4309,26 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); ap->hsm_task_state = HSM_ST; - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); break; case ATA_PROT_ATAPI: ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + ata_port_queue_task(ap, atapi_packet_task, qc, 0); break; case ATA_PROT_ATAPI_NODATA: ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host(ap, &qc->tf); - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + ata_port_queue_task(ap, atapi_packet_task, qc, 0); break; case ATA_PROT_ATAPI_DMA: ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + ata_port_queue_task(ap, atapi_packet_task, qc, 0); break; default: From 058e55e120ca59d37392f9aa753da2d9ead24505 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 075/258] [PATCH] libata: always generate sense if qc->err_mask is non-zero Current sense generation code does not generate sense error if status register value doesn't indicate error condition. However, LLDD's may indicate errors which 't show up in status register. Completing such qc's without generating sense results in successful completion of failed commands. Invoke ata_to_sense_error() regardless of status register if qc->err_mask is not zero such that ata_to_sense_error() generates default sense error. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 234e1cadb070..ec628cea386e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -555,7 +555,8 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. */ - if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, &sb[1], &sb[2], &sb[3]); sb[1] &= 0x0f; @@ -630,7 +631,8 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. */ - if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, &sb[2], &sb[12], &sb[13]); sb[2] &= 0x0f; From 74e6c8c394ca2126a60e97bc1142ec2d91761e9a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 076/258] [PATCH] libata: don't read TF directly from sense generation functions TF register might not be directly accessible depending on errors. e.g. TF of failed NCQ command is in log page 10h. Make reading TF responsibility of error handlers. For the current EH, simply push TF reading into qc completion functions as they are practically part of EH. New EH will fill qc->tf with status registers before complting qcs. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ec628cea386e..28706521773c 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -545,12 +545,6 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* - * Read the controller registers. - */ - WARN_ON(qc->ap->ops->tf_read == NULL); - qc->ap->ops->tf_read(qc->ap, tf); - /* * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. @@ -621,12 +615,6 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* - * Read the controller registers. - */ - WARN_ON(qc->ap->ops->tf_read == NULL); - qc->ap->ops->tf_read(qc->ap, tf); - /* * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. @@ -1337,11 +1325,14 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) */ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && ((cdb[2] & 0x20) || need_sense)) { + qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } else { if (!need_sense) { cmd->result = SAM_STAT_GOOD; } else { + qc->ap->ops->tf_read(qc->ap, &qc->tf); + /* TODO: decide which descriptor format to use * for 48b LBA devices and call that here * instead of the fixed desc, which is only @@ -2133,13 +2124,15 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 static void atapi_sense_complete(struct ata_queued_cmd *qc) { - if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) + if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { /* FIXME: not quite right; we don't want the * translation of taskfile registers into * a sense descriptors, since that's only * correct for ATA, not ATAPI */ + qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); + } qc->scsidone(qc->scsicmd); ata_qc_free(qc); @@ -2207,17 +2200,15 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) cmd->result = SAM_STAT_CHECK_CONDITION; atapi_request_sense(qc); return; - } - - else if (unlikely(err_mask)) + } else if (unlikely(err_mask)) { /* FIXME: not quite right; we don't want the * translation of taskfile registers into * a sense descriptors, since that's only * correct for ATA, not ATAPI */ + qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); - - else { + } else { u8 *scsicmd = cmd->cmnd; if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { From d69cf37d5387801914bbf5297f070c7d2ee0206f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 077/258] [PATCH] libata: add @cdb to ata_exec_internal() Add @cdb to ata_exec_internal(). It will be used by new EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e9002a4174d0..66b48b11fa0e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -964,6 +964,7 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) * @ap: Port to which the command is sent * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command * @dma_dir: Data tranfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer @@ -980,7 +981,7 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) static unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, - struct ata_taskfile *tf, + struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen) { u8 command = tf->command; @@ -995,6 +996,8 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, BUG_ON(qc == NULL); qc->tf = *tf; + if (cdb) + memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { ata_sg_init_one(qc, buf, buflen); @@ -1144,7 +1147,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, tf.protocol = ATA_PROT_PIO; - err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, + err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_FROM_DEVICE, id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { rc = -EIO; @@ -2988,7 +2991,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, tf.protocol = ATA_PROT_NODATA; tf.nsect = dev->xfer_mode; - err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -3028,7 +3031,7 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -4482,7 +4485,7 @@ static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev, tf.flags |= ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + err = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0); if (err) printk(KERN_ERR "%s: ata command failed: %d\n", __FUNCTION__, err); From 35e86b53b1a38e78ff0d70dae4aeb25f4572e433 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 078/258] [PATCH] libata: dec scmd->retries for qcs with zero err_mask qcs might get retried because of unrelated failure. e.g. NCQ command failure causes the whole command set to be aborted. Decrement scmd->retries for such retrials to avoid unnecessarily failing commands. Note that scmd->retries will be incremented the first time. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 28706521773c..44008150d310 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -831,11 +831,14 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc) * should be retried. To be used from EH. * * SCSI midlayer limits the number of retries to scmd->allowed. - * This function might need to adjust scmd->retries for commands - * which get retried due to unrelated NCQ failures. + * scmd->retries is decremented for commands which get retried + * due to unrelated failures (qc->err_mask is zero). */ void ata_eh_qc_retry(struct ata_queued_cmd *qc) { + struct scsi_cmnd *scmd = qc->scsicmd; + if (!qc->err_mask && scmd->retries) + scmd->retries--; __ata_eh_qc_complete(qc); } From ece1d63619df010b8c4f08e43755e2a03f3b6eed Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 079/258] [PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/Makefile | 2 +- drivers/scsi/libata-core.c | 102 +------------- drivers/scsi/libata-eh.c | 264 +++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-scsi.c | 130 ------------------ drivers/scsi/libata.h | 4 +- include/linux/libata.h | 12 +- 6 files changed, 281 insertions(+), 233 deletions(-) create mode 100644 drivers/scsi/libata-eh.c diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e513c3158ad9..503f189dab3b 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -165,7 +165,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 66b48b11fa0e..186a9ce4f072 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4015,99 +4015,6 @@ static void atapi_packet_task(void *_data) ata_poll_qc_complete(qc); } -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(&host_set->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", - ap->id, qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_new - Request an available ATA command, for queueing * @ap: Port associated with device @dev @@ -5145,7 +5052,6 @@ EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(__ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_tf_load); EXPORT_SYMBOL_GPL(ata_tf_read); EXPORT_SYMBOL_GPL(ata_noop_dev_select); @@ -5185,15 +5091,12 @@ EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); -EXPORT_SYMBOL_GPL(ata_scsi_error); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); -EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); @@ -5215,3 +5118,8 @@ EXPORT_SYMBOL_GPL(ata_device_suspend); EXPORT_SYMBOL_GPL(ata_device_resume); EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); + +EXPORT_SYMBOL_GPL(ata_scsi_error); +EXPORT_SYMBOL_GPL(ata_eng_timeout); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c new file mode 100644 index 000000000000..e73f5612aea8 --- /dev/null +++ b/drivers/scsi/libata-eh.c @@ -0,0 +1,264 @@ +/* + * libata-eh.c - libata error handling + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2006 Tejun Heo + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "libata.h" + +/** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + unsigned long flags; + struct ata_queued_cmd *qc; + enum scsi_eh_timer_return ret = EH_HANDLED; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + WARN_ON(qc->scsicmd != cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = EH_NOT_HANDLED; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + +/** + * ata_scsi_error - SCSI layer error handler callback + * @host: SCSI host on which error occurred + * + * Handles SCSI-layer-thrown error events. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + * + * RETURNS: + * Zero. + */ +int ata_scsi_error(struct Scsi_Host *host) +{ + struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; + + DPRINTK("ENTER\n"); + + /* synchronize with IRQ handler and port task */ + spin_unlock_wait(&ap->host_set->lock); + ata_port_flush_task(ap); + + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + + ap->ops->eng_timeout(ap); + + WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); + + scsi_eh_flush_done_q(&ap->eh_done_q); + + DPRINTK("EXIT\n"); + return 0; +} + +/** + * ata_qc_timeout - Handle timeout of queued command + * @qc: Command that timed out + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +static void ata_qc_timeout(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; + u8 host_stat = 0, drv_stat; + unsigned long flags; + + DPRINTK("ENTER\n"); + + ap->hsm_task_state = HSM_ST_IDLE; + + spin_lock_irqsave(&host_set->lock, flags); + + switch (qc->tf.protocol) { + + case ATA_PROT_DMA: + case ATA_PROT_ATAPI_DMA: + host_stat = ap->ops->bmdma_status(ap); + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + /* fall through */ + + default: + ata_altstatus(ap); + drv_stat = ata_chk_status(ap); + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", + ap->id, qc->tf.command, drv_stat, host_stat); + + /* complete taskfile transaction */ + qc->err_mask |= ac_err_mask(drv_stat); + break; + } + + spin_unlock_irqrestore(&host_set->lock, flags); + + ata_eh_qc_complete(qc); + + DPRINTK("EXIT\n"); +} + +/** + * ata_eng_timeout - Handle timeout of queued command + * @ap: Port on which timed-out command is active + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +void ata_eng_timeout(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); + + DPRINTK("EXIT\n"); +} + +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = ata_eh_scsidone; + __ata_qc_complete(qc); + WARN_ON(ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * scmd->retries is decremented for commands which get retried + * due to unrelated failures (qc->err_mask is zero). + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + if (!qc->err_mask && scmd->retries) + scmd->retries--; + __ata_eh_qc_complete(qc); +} diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 44008150d310..745fc263feeb 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -53,7 +53,6 @@ typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); #define RW_RECOVERY_MPAGE 0x1 #define RW_RECOVERY_MPAGE_LEN 12 @@ -713,135 +712,6 @@ int ata_scsi_slave_config(struct scsi_device *sdev) return 0; /* scsi layer doesn't check return value, sigh */ } -/** - * ata_scsi_timed_out - SCSI layer time out callback - * @cmd: timed out SCSI command - * - * Handles SCSI layer timeout. We race with normal completion of - * the qc for @cmd. If the qc is already gone, we lose and let - * the scsi command finish (EH_HANDLED). Otherwise, the qc has - * timed out and EH should be invoked. Prevent ata_qc_complete() - * from finishing it by setting EH_SCHEDULED and return - * EH_NOT_HANDLED. - * - * LOCKING: - * Called from timer context - * - * RETURNS: - * EH_HANDLED or EH_NOT_HANDLED - */ -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) -{ - struct Scsi_Host *host = cmd->device->host; - struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; - unsigned long flags; - struct ata_queued_cmd *qc; - enum scsi_eh_timer_return ret = EH_HANDLED; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&ap->host_set->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - WARN_ON(qc->scsicmd != cmd); - qc->flags |= ATA_QCFLAG_EH_SCHEDULED; - qc->err_mask |= AC_ERR_TIMEOUT; - ret = EH_NOT_HANDLED; - } - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - DPRINTK("EXIT, ret=%d\n", ret); - return ret; -} - -/** - * ata_scsi_error - SCSI layer error handler callback - * @host: SCSI host on which error occurred - * - * Handles SCSI-layer-thrown error events. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - * - * RETURNS: - * Zero. - */ - -int ata_scsi_error(struct Scsi_Host *host) -{ - struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; - - DPRINTK("ENTER\n"); - - /* synchronize with IRQ handler and port task */ - spin_unlock_wait(&ap->host_set->lock); - ata_port_flush_task(ap); - - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); - - ap->ops->eng_timeout(ap); - - WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); - - scsi_eh_flush_done_q(&ap->eh_done_q); - - DPRINTK("EXIT\n"); - return 0; -} - -static void ata_eh_scsidone(struct scsi_cmnd *scmd) -{ - /* nada */ -} - -static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *scmd = qc->scsicmd; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - qc->scsidone = ata_eh_scsidone; - __ata_qc_complete(qc); - WARN_ON(ata_tag_valid(qc->tag)); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); -} - -/** - * ata_eh_qc_complete - Complete an active ATA command from EH - * @qc: Command to complete - * - * Indicate to the mid and upper layers that an ATA command has - * completed. To be used from EH. - */ -void ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - scmd->retries = scmd->allowed; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH - * @qc: Command to retry - * - * Indicate to the mid and upper layers that an ATA command - * should be retried. To be used from EH. - * - * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried - * due to unrelated failures (qc->err_mask is zero). - */ -void ata_eh_qc_retry(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; - __ata_eh_qc_complete(qc); -} - /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 1c755b14521a..75e9bd5833da 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -60,7 +60,6 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct scsi_transport_template ata_scsi_transport_template; extern void ata_scsi_scan_host(struct ata_port *ap); -extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); @@ -90,4 +89,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); +/* libata-eh.c */ +extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); + #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index a6d829cb0567..75bdee09c307 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -531,9 +531,6 @@ extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); -extern int ata_scsi_error(struct Scsi_Host *host); -extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern int ata_scsi_device_resume(struct scsi_device *); @@ -582,7 +579,6 @@ extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eng_timeout(struct ata_port *ap); extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); @@ -637,6 +633,14 @@ extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bit extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ +/* + * EH + */ +extern int ata_scsi_error(struct Scsi_Host *host); +extern void ata_eng_timeout(struct ata_port *ap); +extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); +extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); + static inline int ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc) From 1ad8e7f9eb051b040880e45337ed74bfd916ef7f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH 080/258] [PATCH] libata: make some libata-core routines extern Make libata-core routines which will be used by EH implementation extern. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 29 ++++++++++++----------------- drivers/scsi/libata.h | 13 +++++++++++++ 2 files changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 186a9ce4f072..8beba3cd9a56 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -65,10 +65,6 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, struct ata_device *dev, u16 heads, u16 sectors); -static int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, - int force_pio0); -static int ata_down_sata_spd_limit(struct ata_port *ap); -static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); static unsigned int ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); @@ -412,7 +408,7 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) +void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) { if (ata_dev_enabled(dev)) { printk(KERN_WARNING "ata%u: dev %u disabled\n", @@ -979,10 +975,9 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) * None. Should be called with kernel context, might sleep. */ -static unsigned -ata_exec_internal(struct ata_port *ap, struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) +unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen) { u8 command = tf->command; struct ata_queued_cmd *qc; @@ -1649,7 +1644,7 @@ void ata_port_disable(struct ata_port *ap) * RETURNS: * 0 on success, negative errno on failure */ -static int ata_down_sata_spd_limit(struct ata_port *ap) +int ata_down_sata_spd_limit(struct ata_port *ap) { u32 spd, mask; int highbit; @@ -1709,7 +1704,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ -static int ata_set_sata_spd_needed(struct ata_port *ap) +int ata_set_sata_spd_needed(struct ata_port *ap) { u32 scontrol; @@ -1913,8 +1908,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * RETURNS: * 0 on success, negative errno on failure */ -static int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, - int force_pio0) +int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, + int force_pio0) { unsigned long xfer_mask; int highbit; @@ -1992,7 +1987,7 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) * RETURNS: * 0 on success, negative errno otherwise */ -static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) { struct ata_device *dev; int i, rc = 0, used_dma = 0, found = 0; @@ -2590,9 +2585,9 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) ata_std_postreset, classes); } -static int ata_do_reset(struct ata_port *ap, - ata_reset_fn_t reset, ata_postreset_fn_t postreset, - int verbose, unsigned int *classes) +int ata_do_reset(struct ata_port *ap, + ata_reset_fn_t reset, ata_postreset_fn_t postreset, + int verbose, unsigned int *classes) { int i, rc; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 75e9bd5833da..31efc2e60b69 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -45,7 +45,20 @@ extern int libata_fua; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_port *ap, struct ata_device *dev); extern void ata_port_flush_task(struct ata_port *ap); +extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen); +extern int ata_down_sata_spd_limit(struct ata_port *ap); +extern int ata_set_sata_spd_needed(struct ata_port *ap); +extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, + int force_pio0); +extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); +extern int ata_do_reset(struct ata_port *ap, + ata_reset_fn_t reset, + ata_postreset_fn_t postreset, + int verbose, unsigned int *classes); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); From c13b56a1130bbfacfb588de100e5a248383805a6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 2 Apr 2006 10:34:24 -0400 Subject: [PATCH 081/258] [libata] irq-pio: Fix merge mistake --- drivers/scsi/libata-core.c | 95 -------------------------------------- drivers/scsi/libata-eh.c | 5 +- 2 files changed, 4 insertions(+), 96 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9de48dd4234a..fc3e57f84268 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4124,101 +4124,6 @@ static void ata_pio_task(void *_data) goto fsm_start; } -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(&host_set->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", - ap->id, qc->tf.command, drv_stat, host_stat); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - qc->err_mask |= AC_ERR_TIMEOUT; - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_new - Request an available ATA command, for queueing * @ap: Port associated with device @dev diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index e73f5612aea8..011e083b19e1 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -137,6 +137,7 @@ int ata_scsi_error(struct Scsi_Host *host) * LOCKING: * Inherited from SCSI layer (none, can sleep) */ + static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -171,8 +172,10 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", ap->id, qc->tf.command, drv_stat, host_stat); + ap->hsm_task_state = HSM_ST_IDLE; + /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(drv_stat); + qc->err_mask |= AC_ERR_TIMEOUT; break; } From 6d5f9732a16a74d75f8cdba5b00557662e83f466 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Apr 2006 00:09:41 +0900 Subject: [PATCH 082/258] [PATCH] libata: print SControl in SATA link status info message Now that libata mangles with SControl, it's helpful to print out SControl in link status message. Add it. Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8beba3cd9a56..966be3034bf0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1503,20 +1503,23 @@ void ata_port_probe(struct ata_port *ap) */ static void sata_print_link_status(struct ata_port *ap) { - u32 sstatus, tmp; + u32 sstatus, scontrol, tmp; if (!ap->ops->scr_read) return; sstatus = scr_read(ap, SCR_STATUS); + scontrol = scr_read(ap, SCR_CONTROL); if (sata_dev_present(ap)) { tmp = (sstatus >> 4) & 0xf; - printk(KERN_INFO "ata%u: SATA link up %s (SStatus %X)\n", - ap->id, sata_spd_string(tmp), sstatus); + printk(KERN_INFO + "ata%u: SATA link up %s (SStatus %X SControl %X)\n", + ap->id, sata_spd_string(tmp), sstatus, scontrol); } else { - printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", - ap->id, sstatus); + printk(KERN_INFO + "ata%u: SATA link down (SStatus %X SControl %X)\n", + ap->id, sstatus, scontrol); } } From 4bced2d40555eebf8d685f174aa6d58ace353655 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 2 Apr 2006 20:17:48 -0400 Subject: [PATCH 083/258] [libata] kill bogus cut-n-pasted comments in three drivers --- drivers/scsi/sata_promise.c | 4 ---- drivers/scsi/sata_sil.c | 4 ---- drivers/scsi/sata_sx4.c | 4 ---- 3 files changed, 12 deletions(-) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 9557c7aa45e0..000844a4129f 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -677,10 +677,6 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ rc = pci_enable_device(pdev); if (rc) return rc; diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index d6c7086a5379..1aeb8136731d 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -391,10 +391,6 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ rc = pci_enable_device(pdev); if (rc) return rc; diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 3af28ef76fd9..be6139583391 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -1376,10 +1376,6 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ rc = pci_enable_device(pdev); if (rc) return rc; From af64371ada9452632c349563d688d30d94e918ba Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 2 Apr 2006 20:41:36 -0400 Subject: [PATCH 084/258] [libata] bump versions --- drivers/scsi/ahci.c | 2 +- drivers/scsi/ata_piix.c | 2 +- drivers/scsi/libata.h | 2 +- drivers/scsi/pdc_adma.c | 2 +- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_sil.c | 2 +- drivers/scsi/sata_sil24.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_svw.c | 2 +- drivers/scsi/sata_sx4.c | 2 +- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- 13 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 1bd82c4e52a0..0c5f0c844d21 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -48,7 +48,7 @@ #include #define DRV_NAME "ahci" -#define DRV_VERSION "1.2" +#define DRV_VERSION "1.3" enum { diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 24e71b555172..83839706f5e0 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -93,7 +93,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.05" +#define DRV_VERSION "1.10" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 31efc2e60b69..e3bd1ddb5387 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -29,7 +29,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.20" /* must be exactly four chars */ +#define DRV_VERSION "1.30" /* must be exactly four chars */ struct ata_scsi_args { struct ata_port *ap; diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index d64073dd028f..1364b1da9e2a 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.03" +#define DRV_VERSION "0.04" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 72721ac482d8..c92fbd0989bd 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "sata_nv" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" enum { NV_PORTS = 2, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 8ef042a09448..0b5446ada5ca 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.05" +#define DRV_VERSION "0.06" enum { QS_PORTS = 4, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 1aeb8136731d..f29c3e733a00 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "sata_sil" -#define DRV_VERSION "0.9" +#define DRV_VERSION "1.0" enum { /* diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index c34f6dabf418..646756abb10e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -31,7 +31,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.23" +#define DRV_VERSION "0.24" /* * Port request block (PRB) 32 bytes diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index acc8439dea23..eb3cf5b534dc 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -43,7 +43,7 @@ #include #define DRV_NAME "sata_sis" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" enum { sis_180 = 0, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 724f0ed6a52d..a20bc8154753 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -54,7 +54,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "1.07" +#define DRV_VERSION "1.8" enum { /* Taskfile registers offsets */ diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index be6139583391..801ac3787d5d 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" enum { diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 7ac5a5f5a905..513dd78ea6fe 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -37,7 +37,7 @@ #include #define DRV_NAME "sata_uli" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" enum { uli_5289 = 0, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 791bf652ba63..de4e0eb224bb 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -47,7 +47,7 @@ #include #define DRV_NAME "sata_via" -#define DRV_VERSION "1.1" +#define DRV_VERSION "1.2" enum board_ids_enum { vt6420, From 4332a771f4d2f23a6d3beff3dd5405e79775a211 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 3 Apr 2006 17:43:24 +0800 Subject: [PATCH 085/258] [PATCH] libata-dev: irq-pio minor fix irq-pio minor fix: - remove the redundant hsm_task_state = HSM_ST_IDLE - add devno to printk() as done in upstream Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 8 ++++---- drivers/scsi/libata-eh.c | 3 --- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 56537293ad41..d270b23a03b8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4043,8 +4043,8 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, } /* no more data to transfer */ - DPRINTK("ata%u: command complete, drv_stat 0x%x\n", - ap->id, status); + DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", + ap->id, qc->dev->devno, status); WARN_ON(qc->err_mask); @@ -4061,8 +4061,8 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, case HSM_ST_ERR: if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_ERR "ata%u: command error, drv_stat 0x%x\n", - ap->id, status); + printk(KERN_ERR "ata%u: dev %u command error, drv_stat 0x%x\n", + ap->id, qc->dev->devno, status); /* make sure qc->err_mask is available to * know what's wrong and recover diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 011e083b19e1..9a8eea11b0be 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -137,7 +137,6 @@ int ata_scsi_error(struct Scsi_Host *host) * LOCKING: * Inherited from SCSI layer (none, can sleep) */ - static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -172,8 +171,6 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", ap->id, qc->tf.command, drv_stat, host_stat); - ap->hsm_task_state = HSM_ST_IDLE; - /* complete taskfile transaction */ qc->err_mask |= AC_ERR_TIMEOUT; break; From 31ce6daefe2d312e31ee06b0b3301b1cb7878c04 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 3 Apr 2006 18:31:44 +0800 Subject: [PATCH 086/258] [PATCH] libata-dev: irq-pio minor fix 2 irq-pio minor fix 2: - Use qc as data for ata_pio_task(). Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d270b23a03b8..57b3240ee867 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4097,9 +4097,6 @@ static void ata_pio_task(void *_data) fsm_start: WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - /* * This is purely heuristic. This is a fast path. * Sometimes when we enter, BSY will be cleared in @@ -4112,7 +4109,7 @@ static void ata_pio_task(void *_data) msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, ap, ATA_SHORT_PAUSE); + ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); return; } } @@ -4347,7 +4344,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); break; @@ -4369,7 +4366,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); /* always send first data block using * the ata_pio_task() codepath. @@ -4379,7 +4376,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); /* if polling, ata_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. @@ -4400,7 +4397,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); break; case ATA_PROT_ATAPI_DMA: @@ -4412,7 +4409,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, ap, 0); + ata_port_queue_task(ap, ata_pio_task, qc, 0); break; default: From 95de719adc94392a95c3c4d0a2d6b8b1ea39d236 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Apr 2006 10:57:18 +0800 Subject: [PATCH 087/258] [PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter Convert the ATAPI_ENABLE_DMADIR compile time option needed by some SATA-PATA bridge to runtime module parameter. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 4 ++++ drivers/scsi/libata-scsi.c | 6 ++---- drivers/scsi/libata.h | 1 + include/linux/libata.h | 1 - 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 966be3034bf0..3387fe35c54f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -76,6 +76,10 @@ int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); +int atapi_dmadir = 0; +module_param(atapi_dmadir, int, 0444); +MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); + int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 745fc263feeb..c9c001490293 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2163,11 +2163,9 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) qc->tf.protocol = ATA_PROT_ATAPI_DMA; qc->tf.feature |= ATAPI_PKT_DMA; -#ifdef ATAPI_ENABLE_DMADIR - /* some SATA bridges need us to indicate data xfer direction */ - if (cmd->sc_data_direction != DMA_TO_DEVICE) + if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) + /* some SATA bridges need us to indicate data xfer direction */ qc->tf.feature |= ATAPI_DMADIR; -#endif } qc->nbytes = cmd->bufflen; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index e3bd1ddb5387..652c08e3808e 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -41,6 +41,7 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; +extern int atapi_dmadir; extern int libata_fua; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); diff --git a/include/linux/libata.h b/include/linux/libata.h index 75bdee09c307..03231cb6b406 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -44,7 +44,6 @@ #undef ATA_NDEBUG /* define to disable quick runtime checks */ #undef ATA_ENABLE_PATA /* define to enable PATA support in some * low-level drivers */ -#undef ATAPI_ENABLE_DMADIR /* enables ATAPI DMADIR bridge support */ /* note: prints function name for you */ From c2a6585296009379e0f4eff39cdcb108b457ebf2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Apr 2006 01:58:06 +0900 Subject: [PATCH 088/258] [PATCH] ahci: do not fail softreset if PHY reports no device All softreset methods are responsible for detecting device presence and succeed softreset in such cases. AHCI didn't use to check for device presence before proceeding with softreset and this caused unnecessary reset retrials during probing. This patch adds presence detection to AHCI softreset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 0c5f0c844d21..ff48066d4c4f 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -549,6 +549,12 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) DPRINTK("ENTER\n"); + if (!sata_dev_present(ap)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + return 0; + } + /* prepare for SRST (AHCI-1.1 10.4.1) */ rc = ahci_stop_engine(ap); if (rc) { From 381544bba3ae6f2f1004b267da34f840b469033c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Apr 2006 13:04:39 -0400 Subject: [PATCH 089/258] libata: Fix EH merge difference between this branch and upstream. --- drivers/scsi/libata-eh.c | 3 +-- drivers/scsi/libata.h | 1 + include/linux/libata.h | 1 - 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index e73f5612aea8..b518654b9d60 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -97,7 +97,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) * RETURNS: * Zero. */ -int ata_scsi_error(struct Scsi_Host *host) +void ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; @@ -116,7 +116,6 @@ int ata_scsi_error(struct Scsi_Host *host) scsi_eh_flush_done_q(&ap->eh_done_q); DPRINTK("EXIT\n"); - return 0; } /** diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 652c08e3808e..b18d377588dc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -105,5 +105,6 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); +extern void ata_scsi_error(struct Scsi_Host *host); #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index a7161d42d18f..2564bc514bca 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -637,7 +637,6 @@ extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_ /* * EH */ -extern int ata_scsi_error(struct Scsi_Host *host); extern void ata_eng_timeout(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); From 35bb94b116e1fd4959ef0d3187458b5820eac8c4 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Apr 2006 13:12:34 -0400 Subject: [PATCH 090/258] libata: Add helper ata_shost_to_port() --- drivers/scsi/libata-core.c | 4 ++-- drivers/scsi/libata-eh.c | 4 ++-- drivers/scsi/libata-scsi.c | 8 ++++---- drivers/scsi/sata_svw.c | 2 +- include/linux/libata.h | 6 ++++++ 5 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3387fe35c54f..6420062f2c1e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4659,7 +4659,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, host->transportt = &ata_scsi_transport_template; - ap = (struct ata_port *) &host->hostdata[0]; + ap = ata_shost_to_port(host); ata_host_init(ap, host, host_set, ent, port_no); @@ -4872,7 +4872,7 @@ void ata_host_set_remove(struct ata_host_set *host_set) int ata_scsi_release(struct Scsi_Host *host) { - struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + struct ata_port *ap = ata_shost_to_port(host); int i; DPRINTK("ENTER\n"); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index b518654b9d60..c31b13fd5307 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -64,7 +64,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) { struct Scsi_Host *host = cmd->device->host; - struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + struct ata_port *ap = ata_shost_to_port(host); unsigned long flags; struct ata_queued_cmd *qc; enum scsi_eh_timer_return ret = EH_HANDLED; @@ -99,7 +99,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) */ void ata_scsi_error(struct Scsi_Host *host) { - struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; + struct ata_port *ap = ata_shost_to_port(host); DPRINTK("ENTER\n"); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 5ae7613bc157..9871f8272df0 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -395,7 +395,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) int ata_scsi_device_resume(struct scsi_device *sdev) { - struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0]; + struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = &ap->device[sdev->id]; return ata_device_resume(ap, dev); @@ -403,7 +403,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev) int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) { - struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0]; + struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = &ap->device[sdev->id]; return ata_device_suspend(ap, dev, state); @@ -704,7 +704,7 @@ int ata_scsi_slave_config(struct scsi_device *sdev) struct ata_port *ap; struct ata_device *dev; - ap = (struct ata_port *) &sdev->host->hostdata[0]; + ap = ata_shost_to_port(sdev->host); dev = &ap->device[sdev->id]; ata_scsi_dev_config(sdev, dev); @@ -2478,7 +2478,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) struct scsi_device *scsidev = cmd->device; struct Scsi_Host *shost = scsidev->host; - ap = (struct ata_port *) &shost->hostdata[0]; + ap = ata_shost_to_port(shost); spin_unlock(shost->host_lock); spin_lock(&ap->host_set->lock); diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index e15c693e0539..d5eb5375e265 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -257,7 +257,7 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, int len, index; /* Find the ata_port */ - ap = (struct ata_port *) &shost->hostdata[0]; + ap = ata_shost_to_port(shost); if (ap == NULL) return 0; diff --git a/include/linux/libata.h b/include/linux/libata.h index 2564bc514bca..fe0a1dcc76c2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -33,6 +33,7 @@ #include #include #include +#include /* * compile-time options: to be removed as soon as all the drivers are @@ -977,4 +978,9 @@ static inline void ata_pad_free(struct ata_port *ap, struct device *dev) dma_free_coherent(dev, ATA_DMA_PAD_BUF_SZ, ap->pad, ap->pad_dma); } +static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host) +{ + return (struct ata_port *) &host->hostdata[0]; +} + #endif /* __LINUX_LIBATA_H__ */ From db70fef0750e5f8dbb64f9fadb333d2c7caf26a1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:16:44 +0900 Subject: [PATCH 091/258] [PATCH] libata: set default cbl in probeinit Make setting CBL type responsibility of probeinit. This allows using only ap->cbl == ATA_CBL_SATA test in all other parts. Without this, ata_down_sata_spd_limit() doesn't work during probe reset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 6420062f2c1e..f37179623efa 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2369,12 +2369,16 @@ void ata_std_probeinit(struct ata_port *ap) if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) { u32 spd; + /* set cable type and resume link */ + ap->cbl = ATA_CBL_SATA; sata_phy_resume(ap); + /* init sata_spd_limit to the current value */ spd = (scr_read(ap, SCR_CONTROL) & 0xf0) >> 4; if (spd) ap->sata_spd_limit &= (1 << spd) - 1; + /* wait for device */ if (sata_dev_present(ap)) ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); } @@ -2531,10 +2535,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) { DPRINTK("ENTER\n"); - /* set cable type if it isn't already set */ - if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA) - ap->cbl = ATA_CBL_SATA; - /* print link status */ if (ap->cbl == ATA_CBL_SATA) sata_print_link_status(ap); @@ -2584,7 +2584,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) ata_reset_fn_t hardreset; hardreset = NULL; - if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) + if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read) hardreset = sata_std_hardreset; return ata_drive_probe_reset(ap, ata_std_probeinit, From 2bf2cb26b2512c6a609bb152982c388329bedff6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:16:45 +0900 Subject: [PATCH 092/258] [PATCH] libata: kill @verbose from ata_reset_fn_t @verbose was added to ata_reset_fn_t because AHCI complained during probing if no device was attached to the port. However, muting failure message isn't the correct approach. Reset methods are responsible for detecting no device condition and finishing successfully. Now that AHCI softreset is fixed, kill @verbose. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 13 +++++-------- drivers/scsi/libata-core.c | 36 ++++++++++++------------------------ drivers/scsi/libata.h | 6 ++---- drivers/scsi/sata_sil24.c | 8 +++----- include/linux/libata.h | 8 +++----- 5 files changed, 25 insertions(+), 46 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 20fc0846e0be..0e7fb9bf2cd1 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -534,7 +534,7 @@ static int ahci_poll_register(void __iomem *reg, u32 mask, u32 val, return -1; } -static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) +static int ahci_softreset(struct ata_port *ap, unsigned int *class) { struct ahci_host_priv *hpriv = ap->host_set->private_data; struct ahci_port_priv *pp = ap->private_data; @@ -646,22 +646,19 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) fail_restart: ahci_start_engine(ap); fail: - if (verbose) - printk(KERN_ERR "ata%u: softreset failed (%s)\n", - ap->id, reason); - else - DPRINTK("EXIT, rc=%d reason=\"%s\"\n", rc, reason); + printk(KERN_ERR "ata%u: softreset failed (%s)\n", + ap->id, reason); return rc; } -static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +static int ahci_hardreset(struct ata_port *ap, unsigned int *class) { int rc; DPRINTK("ENTER\n"); ahci_stop_engine(ap); - rc = sata_std_hardreset(ap, verbose, class); + rc = sata_std_hardreset(ap, class); ahci_start_engine(ap); if (rc == 0) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f37179623efa..92b5077ac052 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2387,7 +2387,6 @@ void ata_std_probeinit(struct ata_port *ap) /** * ata_std_softreset - reset host port via ATA SRST * @ap: port to reset - * @verbose: fail verbosely * @classes: resulting classes of attached devices * * Reset host port using ATA SRST. This function is to be used @@ -2399,7 +2398,7 @@ void ata_std_probeinit(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) +int ata_std_softreset(struct ata_port *ap, unsigned int *classes) { unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0, err_mask; @@ -2425,12 +2424,8 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) DPRINTK("about to softreset, devmask=%x\n", devmask); err_mask = ata_bus_softreset(ap, devmask); if (err_mask) { - if (verbose) - printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", - ap->id, err_mask); - else - DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n", - err_mask); + printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", + ap->id, err_mask); return -EIO; } @@ -2447,7 +2442,6 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) /** * sata_std_hardreset - reset host port via SATA phy reset * @ap: port to reset - * @verbose: fail verbosely * @class: resulting class of attached device * * SATA phy-reset host port using DET bits of SControl register. @@ -2460,7 +2454,7 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) * RETURNS: * 0 on success, -errno otherwise. */ -int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +int sata_std_hardreset(struct ata_port *ap, unsigned int *class) { u32 scontrol; @@ -2500,11 +2494,8 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) } if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - if (verbose) - printk(KERN_ERR "ata%u: COMRESET failed " - "(device not ready)\n", ap->id); - else - DPRINTK("EXIT, device not ready\n"); + printk(KERN_ERR "ata%u: COMRESET failed " + "(device not ready)\n", ap->id); return -EIO; } @@ -2592,16 +2583,15 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) ata_std_postreset, classes); } -int ata_do_reset(struct ata_port *ap, - ata_reset_fn_t reset, ata_postreset_fn_t postreset, - int verbose, unsigned int *classes) +int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, + ata_postreset_fn_t postreset, unsigned int *classes) { int i, rc; for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ATA_DEV_UNKNOWN; - rc = reset(ap, verbose, classes); + rc = reset(ap, classes); if (rc) return rc; @@ -2645,8 +2635,6 @@ int ata_do_reset(struct ata_port *ap, * - If classification is supported, fill classes[] with * recognized class codes. * - If classification is not supported, leave classes[] alone. - * - If verbose is non-zero, print error message on failure; - * otherwise, shut up. * * LOCKING: * Kernel thread context (may sleep) @@ -2666,7 +2654,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, probeinit(ap); if (softreset && !ata_set_sata_spd_needed(ap)) { - rc = ata_do_reset(ap, softreset, postreset, 0, classes); + rc = ata_do_reset(ap, softreset, postreset, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; printk(KERN_INFO "ata%u: softreset failed, will try " @@ -2678,7 +2666,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, goto done; while (1) { - rc = ata_do_reset(ap, hardreset, postreset, 0, classes); + rc = ata_do_reset(ap, hardreset, postreset, classes); if (rc == 0) { if (classes[0] != ATA_DEV_UNKNOWN) goto done; @@ -2699,7 +2687,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, ap->id); ssleep(5); - rc = ata_do_reset(ap, softreset, postreset, 0, classes); + rc = ata_do_reset(ap, softreset, postreset, classes); } done: diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index b18d377588dc..3f8b0a863781 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -56,10 +56,8 @@ extern int ata_set_sata_spd_needed(struct ata_port *ap); extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, int force_pio0); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); -extern int ata_do_reset(struct ata_port *ap, - ata_reset_fn_t reset, - ata_postreset_fn_t postreset, - int verbose, unsigned int *classes); +extern int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, + ata_postreset_fn_t postreset, unsigned int *classes); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 9aa7493ea146..26d84e094b1d 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -426,8 +426,7 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } -static int sil24_softreset(struct ata_port *ap, int verbose, - unsigned int *class) +static int sil24_softreset(struct ata_port *ap, unsigned int *class) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; @@ -489,13 +488,12 @@ static int sil24_softreset(struct ata_port *ap, int verbose, return 0; } -static int sil24_hardreset(struct ata_port *ap, int verbose, - unsigned int *class) +static int sil24_hardreset(struct ata_port *ap, unsigned int *class) { unsigned int dummy_class; /* sil24 doesn't report device signature after hard reset */ - return sata_std_hardreset(ap, verbose, &dummy_class); + return sata_std_hardreset(ap, &dummy_class); } static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) diff --git a/include/linux/libata.h b/include/linux/libata.h index fe0a1dcc76c2..d5fd5c06e755 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -252,7 +252,7 @@ struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); typedef void (*ata_probeinit_fn_t)(struct ata_port *); -typedef int (*ata_reset_fn_t)(struct ata_port *, int, unsigned int *); +typedef int (*ata_reset_fn_t)(struct ata_port *, unsigned int *); typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *); struct ata_ioports { @@ -509,10 +509,8 @@ extern int ata_drive_probe_reset(struct ata_port *ap, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, unsigned int *classes); extern void ata_std_probeinit(struct ata_port *ap); -extern int ata_std_softreset(struct ata_port *ap, int verbose, - unsigned int *classes); -extern int sata_std_hardreset(struct ata_port *ap, int verbose, - unsigned int *class); +extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); +extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); extern int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, int post_reset); From 987d2f05b396760517eef7cba66b2f415ac484f5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:16:45 +0900 Subject: [PATCH 093/258] [PATCH] libata: make reset methods complain when they fail Make reset methods complain loud when they fail. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 8 +++++--- drivers/scsi/sata_sil24.c | 2 +- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 92b5077ac052..2d76ce23728f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2232,8 +2232,10 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the bus shows 0xFF because the odd clown forgets the D7 * pulldown resistor. */ - if (ata_check_status(ap) == 0xFF) + if (ata_check_status(ap) == 0xFF) { + printk(KERN_ERR "ata%u: SRST failed (status 0xFF)\n", ap->id); return AC_ERR_OTHER; + } ata_bus_post_reset(ap, devmask); @@ -2494,8 +2496,8 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) } if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - printk(KERN_ERR "ata%u: COMRESET failed " - "(device not ready)\n", ap->id); + printk(KERN_ERR + "ata%u: COMRESET failed (device not ready)\n", ap->id); return -EIO; } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 26d84e094b1d..a9506adadb6f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -473,7 +473,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) writel(irq_enable, port + PORT_IRQ_ENABLE_SET); if (!(irq_stat & PORT_IRQ_COMPLETE)) { - DPRINTK("EXIT, srst failed\n"); + printk(KERN_ERR "ata%u: softreset failed (timeout)\n", ap->id); return -EIO; } From 1c1d832cea1ab851a3f9b9d83245f5bc8b5b04b6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:22:29 +0900 Subject: [PATCH 094/258] [PATCH] sata_sil24: fix timeout calculation in sil24_softreset sil24_softreset calculated timeout by adding ATA_TMOUT_BOOT * HZ to jiffies; however, as ATA_TMOUT_BOOT is already in jiffies, multiplying by HZ makes the value way off. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index a9506adadb6f..24eed37a063f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -432,7 +432,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; - unsigned long timeout = jiffies + ATA_TMOUT_BOOT * HZ; + unsigned long timeout = jiffies + ATA_TMOUT_BOOT; u32 irq_enable, irq_stat; DPRINTK("ENTER\n"); From 643be977f9feba8c3c1e768fc06cac84596ec6f8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:22:29 +0900 Subject: [PATCH 095/258] [PATCH] sata_sil24: better error message from softreset Improve softreset error message. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 24eed37a063f..d6cfd8eb29b9 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -434,6 +434,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) dma_addr_t paddr = pp->cmd_block_dma; unsigned long timeout = jiffies + ATA_TMOUT_BOOT; u32 irq_enable, irq_stat; + const char *reason; DPRINTK("ENTER\n"); @@ -473,8 +474,11 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) writel(irq_enable, port + PORT_IRQ_ENABLE_SET); if (!(irq_stat & PORT_IRQ_COMPLETE)) { - printk(KERN_ERR "ata%u: softreset failed (timeout)\n", ap->id); - return -EIO; + if (irq_stat & PORT_IRQ_ERROR) + reason = "SRST command error"; + else + reason = "timeout"; + goto err; } sil24_update_tf(ap); @@ -486,6 +490,10 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) out: DPRINTK("EXIT, class=%u\n", *class); return 0; + + err: + printk(KERN_ERR "ata%u: softreset failed (%s)\n", ap->id, reason); + return -EIO; } static int sil24_hardreset(struct ata_port *ap, unsigned int *class) From c22daff41001e9ccead87179ac0547f85447139e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:22:29 +0900 Subject: [PATCH 096/258] [PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 47 ++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 3 +++ 2 files changed, 50 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2d76ce23728f..0075fe7404d5 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5029,6 +5029,52 @@ int ata_ratelimit(void) return rc; } +/** + * ata_wait_register - wait until register value changes + * @reg: IO-mapped register + * @mask: Mask to apply to read register value + * @val: Wait condition + * @interval_msec: polling interval in milliseconds + * @timeout_msec: timeout in milliseconds + * + * Waiting for some bits of register to change is a common + * operation for ATA controllers. This function reads 32bit LE + * IO-mapped register @reg and tests for the following condition. + * + * (*@reg & mask) != val + * + * If the condition is met, it returns; otherwise, the process is + * repeated after @interval_msec until timeout. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * The final register value. + */ +u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, + unsigned long interval_msec, + unsigned long timeout_msec) +{ + unsigned long timeout; + u32 tmp; + + tmp = ioread32(reg); + + /* Calculate timeout _after_ the first read to make sure + * preceding writes reach the controller before starting to + * eat away the timeout. + */ + timeout = jiffies + (timeout_msec * HZ) / 1000; + + while ((tmp & mask) == val && time_before(jiffies, timeout)) { + msleep(interval_msec); + tmp = ioread32(reg); + } + + return tmp; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -5079,6 +5125,7 @@ EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); diff --git a/include/linux/libata.h b/include/linux/libata.h index d5fd5c06e755..dd5bcb5d29b5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -543,6 +543,9 @@ extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout); extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, unsigned long delay); +extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, + unsigned long interval_msec, + unsigned long timeout_msec); /* * Default driver ops implementations From 75fe18069a55c78f553643b4e3a24c6864d71d87 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:22:29 +0900 Subject: [PATCH 097/258] [PATCH] ahci: use ata_wait_register() Replace ahci_poll_register() with ata_wait_register(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 31 ++++++------------------------- 1 file changed, 6 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 0e7fb9bf2cd1..1b8429cb3c96 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -516,24 +516,6 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); } -static int ahci_poll_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) -{ - unsigned long timeout; - u32 tmp; - - timeout = jiffies + (timeout_msec * HZ) / 1000; - do { - tmp = readl(reg); - if ((tmp & mask) == val) - return 0; - msleep(interval_msec); - } while (time_before(jiffies, timeout)); - - return -1; -} - static int ahci_softreset(struct ata_port *ap, unsigned int *class) { struct ahci_host_priv *hpriv = ap->host_set->private_data; @@ -543,6 +525,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) const u32 cmd_fis_len = 5; /* five dwords */ const char *reason = NULL; struct ata_taskfile tf; + u32 tmp; u8 *fis; int rc; @@ -564,8 +547,6 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) /* check BUSY/DRQ, perform Command List Override if necessary */ ahci_tf_read(ap, &tf); if (tf.command & (ATA_BUSY | ATA_DRQ)) { - u32 tmp; - if (!(hpriv->cap & HOST_CAP_CLO)) { rc = -EIO; reason = "port busy but no CLO"; @@ -575,10 +556,10 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) tmp = readl(port_mmio + PORT_CMD); tmp |= PORT_CMD_CLO; writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - if (ahci_poll_register(port_mmio + PORT_CMD, PORT_CMD_CLO, 0x0, - 1, 500)) { + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); + if (tmp & PORT_CMD_CLO) { rc = -EIO; reason = "CLO failed"; goto fail_restart; @@ -599,9 +580,9 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ writel(1, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - if (ahci_poll_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x0, 1, 500)) { + tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, 500); + if (tmp & 0x1) { rc = -EIO; reason = "1st FIS failed"; goto fail; From 7dd29dd629bd5a4e6d8a164a9886da01f291ecf2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:22:30 +0900 Subject: [PATCH 098/258] [PATCH] sata_sil24: use ata_wait_register() Replace hard-coded waiting loops in sata_sil24 to ata_wait_register(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index d6cfd8eb29b9..286c46e1f21c 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -432,8 +432,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; - unsigned long timeout = jiffies + ATA_TMOUT_BOOT; - u32 irq_enable, irq_stat; + u32 mask, irq_enable, irq_stat; const char *reason; DPRINTK("ENTER\n"); @@ -459,16 +458,12 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) writel((u32)paddr, port + PORT_CMD_ACTIVATE); - do { - irq_stat = readl(port + PORT_IRQ_STAT); - writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; + irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, + 100, ATA_TMOUT_BOOT / HZ * 1000); - irq_stat >>= PORT_IRQ_RAW_SHIFT; - if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR)) - break; - - msleep(100); - } while (time_before(jiffies, timeout)); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ + irq_stat >>= PORT_IRQ_RAW_SHIFT; /* restore IRQs */ writel(irq_enable, port + PORT_IRQ_ENABLE_SET); @@ -937,14 +932,13 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* GPIO off */ writel(0, host_base + HOST_FLASH_CMD); - /* Mask interrupts during initialization */ + /* clear global reset & mask interrupts during initialization */ writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; u32 tmp; - int cnt; probe_ent->port[i].cmd_addr = portu + PORT_PRB; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; @@ -958,13 +952,9 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tmp = readl(port + PORT_CTRL_STAT); if (tmp & PORT_CS_PORT_RST) { writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - readl(port + PORT_CTRL_STAT); /* sync */ - for (cnt = 0; cnt < 10; cnt++) { - msleep(10); - tmp = readl(port + PORT_CTRL_STAT); - if (!(tmp & PORT_CS_PORT_RST)) - break; - } + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); if (tmp & PORT_CS_PORT_RST) dev_printk(KERN_ERR, &pdev->dev, "failed to clear port RST\n"); From ec573755fcd7975aae6b0d536dbcd74a6eed029c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:26:29 +0900 Subject: [PATCH 099/258] [PATCH] libata: disable failed devices only once in ata_bus_probe() Devices which consumed all their changes used to be disabled every iteration. This causes unnecessary noise in the console output. Disable once and leave alone. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0075fe7404d5..9194e4a6a55a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1411,12 +1411,9 @@ static int ata_bus_probe(struct ata_port *ap) /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; - dev->class = classes[i]; - if (!tries[i]) { - ata_down_xfermask_limit(ap, dev, 1); - ata_dev_disable(ap, dev); - } + if (tries[i]) + dev->class = classes[i]; if (!ata_dev_enabled(dev)) continue; @@ -1477,6 +1474,11 @@ static int ata_bus_probe(struct ata_port *ap) tries[dev->devno] = 0; } + if (!tries[dev->devno]) { + ata_down_xfermask_limit(ap, dev, 1); + ata_dev_disable(ap, dev); + } + goto retry; } From 51713d359ae274fa4dd4b199ba3a6b0c21ef99e0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:26:29 +0900 Subject: [PATCH 100/258] [PATCH] libata: cosmetic update to ata_bus_probe() Move ata_set_mode() failure handling outside of ap->ops->set_mode if clause such that it can handle ap->ops->set_mode failures after it's updated. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9194e4a6a55a..588578dc6caf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1441,12 +1441,12 @@ static int ata_bus_probe(struct ata_port *ap) break; } rc = 0; - } else { + } else rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; - goto fail; - } + + if (rc) { + down_xfermask = 1; + goto fail; } for (i = 0; i < ATA_MAX_DEVICES; i++) From 499a86af41cf5a4bf811726841bbc49c0e96fd35 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:18 +0900 Subject: [PATCH 101/258] [PATCH] libata: export ata_set_sata_spd() This will be used by LLDD hardreset implementation. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 3 ++- include/linux/libata.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 588578dc6caf..509178c3700c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1738,7 +1738,7 @@ int ata_set_sata_spd_needed(struct ata_port *ap) * 0 if spd doesn't need to be changed, 1 if spd has been * changed. -EOPNOTSUPP if SCR registers are inaccessible. */ -static int ata_set_sata_spd(struct ata_port *ap) +int ata_set_sata_spd(struct ata_port *ap) { u32 scontrol; @@ -5113,6 +5113,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); EXPORT_SYMBOL_GPL(ata_bmdma_status); EXPORT_SYMBOL_GPL(ata_bmdma_stop); EXPORT_SYMBOL_GPL(ata_port_probe); +EXPORT_SYMBOL_GPL(ata_set_sata_spd); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); diff --git a/include/linux/libata.h b/include/linux/libata.h index dd5bcb5d29b5..d35b1e3bb7e0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -504,6 +504,7 @@ extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); extern void ata_bus_reset(struct ata_port *ap); +extern int ata_set_sata_spd(struct ata_port *ap); extern int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, From 640088024dbf19553bb4b53d81e919cdf570f3b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:18 +0900 Subject: [PATCH 102/258] [PATCH] sata_sil24: typo fix Type fix. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 286c46e1f21c..e9c5c2f63909 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -174,7 +174,7 @@ enum { PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ - PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ From 3b9f1d0fb3fd68419ee3fa3e0833c6a05462150d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:18 +0900 Subject: [PATCH 103/258] [PATCH] sata_sil24: rename PORT_IRQ_SDB_FIS to PORT_IRQ_SDB_NOTIFY Rename PORT_IRQ_SDB_FIS to more proper PORT_IRQ_SDB_NOTIFY. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index e9c5c2f63909..a5ea9f6df8eb 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -143,7 +143,7 @@ enum { PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ - PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */ + PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ /* bits[27:16] are unmasked (raw) */ PORT_IRQ_RAW_SHIFT = 16, @@ -974,8 +974,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Configure interrupts */ writel(0xffff, port + PORT_IRQ_ENABLE_CLR); - writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS, - port + PORT_IRQ_ENABLE_SET); + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_SDB_NOTIFY, port + PORT_IRQ_ENABLE_SET); /* Clear interrupts */ writel(0x0fff0fff, port + PORT_IRQ_STAT); From 7dafc3fd9a9e34e4a02ee6d141fd391ad5bdcd90 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:18 +0900 Subject: [PATCH 104/258] [PATCH] sata_sil24: add more constants Add HOST_CTRL_* and more PORT_IRQ_* bits. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index a5ea9f6df8eb..1b648d67db13 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -86,6 +86,13 @@ enum { /* HOST_SLOT_STAT bits */ HOST_SSTAT_ATTN = (1 << 31), + /* HOST_CTRL bits */ + HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ + HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ + HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ + HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ + HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + /* * Port registers * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) @@ -142,7 +149,11 @@ enum { PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ - PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ + PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ + PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ + PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ + PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ /* bits[27:16] are unmasked (raw) */ From 9466d85bb2c80b1aa169dda638b535f2f19714e4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:18 +0900 Subject: [PATCH 105/258] [PATCH] sata_sil24: consolidate host flags into SIL24_COMMON_FLAGS All sil24 controllers share the same host flags except for NPORTS. Consolidate them into SIL24_COMMON_FLAGS. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 1b648d67db13..50c2c6bcba6e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -218,6 +218,10 @@ enum { BID_SIL3132 = 1, BID_SIL3131 = 2, + /* host flags */ + SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + IRQ_STAT_4PORTS = 0xf, }; @@ -344,9 +348,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - SIL24_NPORTS2FLAG(4), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -355,9 +357,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3132 */ { .sht = &sil24_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - SIL24_NPORTS2FLAG(2), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -366,9 +366,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3131/sil_3531 */ { .sht = &sil24_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - SIL24_NPORTS2FLAG(1), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ From 37024e8ee0d8dbcd0c2634192cb3836549db054e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 106/258] [PATCH] sata_sil24: implement loss of completion interrupt on PCI-X errta fix SiI3124 might lose completion interrupt if completion interrupt occurs shortly after SLOT_STAT register is read for the previous completion interrupt if it is operating in PCI-X mode. This currently doesn't trigger as libata never queues more than one command, but it will with NCQ changes. This patch implements the workaround - turning on WoC and explicitly clearing interrupt. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 50c2c6bcba6e..c535607e995a 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -221,6 +221,7 @@ enum { /* host flags */ SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ IRQ_STAT_4PORTS = 0xf, }; @@ -348,7 +349,8 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | + SIL24_FLAG_PCIX_IRQ_WOC, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -737,6 +739,10 @@ static inline void sil24_host_intr(struct ata_port *ap) slot_stat = readl(port + PORT_SLOT_STAT); if (!(slot_stat & HOST_SSTAT_ATTN)) { struct sil24_port_priv *pp = ap->private_data; + + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + /* * !HOST_SSAT_ATTN guarantees successful completion, * so reading back tf registers is unnecessary for @@ -868,6 +874,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *host_base = NULL; void __iomem *port_base = NULL; int i, rc; + u32 tmp; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -941,13 +948,23 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* GPIO off */ writel(0, host_base + HOST_FLASH_CMD); + /* Apply workaround for completion IRQ loss on PCI-X errata */ + if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { + tmp = readl(host_base + HOST_CTRL); + if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) + dev_printk(KERN_INFO, &pdev->dev, + "Applying completion IRQ loss on PCI-X " + "errata fix\n"); + else + probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; + } + /* clear global reset & mask interrupts during initialization */ writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; - u32 tmp; probe_ent->port[i].cmd_addr = portu + PORT_PRB; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; @@ -969,6 +986,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "failed to clear port RST\n"); } + /* Configure IRQ WoC */ + if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + /* Zero error counters. */ writel(0x8000, port + PORT_DECODE_ERR_THRESH); writel(0x8000, port + PORT_CRC_ERR_THRESH); From b5bc421c96ca56a9abaad4619da01fe0071904a2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 107/258] [PATCH] sata_sil24: implement sil24_init_port() Implement sil24_init_port which performs port initialization via PORT_CS_INIT. To be used later by softreset and EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index c535607e995a..8199527966eb 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -437,6 +437,22 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } +static int sil24_init_port(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 tmp; + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_INIT, PORT_CS_INIT, 10, 100); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, 0, 10, 100); + + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) + return -EIO; + return 0; +} + static int sil24_softreset(struct ata_port *ap, unsigned int *class) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; From 2555d6c268240fb3f5f335bd62d0518025343c0f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 108/258] [PATCH] sata_sil24: put port into known state before softresetting Make sure the controller has no pending commands and ready for command before issuing SRST. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 8199527966eb..bfbd630a889c 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -474,6 +474,12 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) irq_enable = readl(port + PORT_IRQ_ENABLE_SET); writel(irq_enable, port + PORT_IRQ_ENABLE_CLR); + /* put the port into known state */ + if (sil24_init_port(ap)) { + reason ="port not ready"; + goto err; + } + /* * XXX: Not sure whether the following sleep is needed or not. * The original driver had it. So.... From 0eaa6058a6a664ce692e3dc38c6891a74ca47f59 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 109/258] [PATCH] sata_sil24: kill 10ms sleep in softreset Nothing, not the datasheet nor the errats, says this delay is necessary and with the previous PORT_CS_INIT change, we know the controller is in good state. Kill 10ms sleep. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index bfbd630a889c..be4817e6502b 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -480,12 +480,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) goto err; } - /* - * XXX: Not sure whether the following sleep is needed or not. - * The original driver had it. So.... - */ - msleep(10); - + /* do SRST */ prb->ctrl = PRB_CTRL_SRST; prb->fis[1] = 0; /* no PM yet */ From ecc2e2b9c97719592b3078d5a5a8666551c91115 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 110/258] [PATCH] sata_sil24: reimplement hardreset Reimplement hardreset according to the datasheet. The old hardreset didn't reset controller status and the controller might not be ready after reset. Also, as SStatus is a bit flakey after hardreset, sata_std_hardrset() didn't use to wait long enough before proceeding. Note that as we're not depending on SStatus, DET==1 condition cannot be used to wait for link, so use shorter timeout for no device case. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 43 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index be4817e6502b..4180c81f639c 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -521,10 +521,47 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) static int sil24_hardreset(struct ata_port *ap, unsigned int *class) { - unsigned int dummy_class; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + const char *reason; + int tout_msec; + u32 tmp; - /* sil24 doesn't report device signature after hard reset */ - return sata_std_hardreset(ap, &dummy_class); + /* sil24 does the right thing(tm) without any protection */ + ata_set_sata_spd(ap); + + tout_msec = 100; + if (sata_dev_present(ap)) + tout_msec = 5000; + + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); + + /* SStatus oscillates between zero and valid status for short + * duration after DEV_RST, give it time to settle. + */ + msleep(100); + + if (tmp & PORT_CS_DEV_RST) { + if (!sata_dev_present(ap)) + return 0; + reason = "link not ready"; + goto err; + } + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + reason = "device not ready"; + goto err; + } + + /* sil24 doesn't report device class code after hardreset, + * leave *class alone. + */ + return 0; + + err: + printk(KERN_ERR "ata%u: hardreset failed (%s)\n", ap->id, reason); + return -EIO; } static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) From a5b4c47a2731f1dd685f28b79464e4442f3682ec Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 111/258] [PATCH] sata_sil24: don't do hardreset during driver initialization There's no need to perform hardreset during driver initialization. It's already done during host reset and even if the controller is in some wacky state, we now have proper hardreset to back us up. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4180c81f639c..a8328a88e8c9 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -1069,11 +1069,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Clear port multiplier enable and resume bits */ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); - - /* Reset itself */ - if (__sil24_reset_controller(port)) - dev_printk(KERN_ERR, &pdev->dev, - "failed to reset controller\n"); } /* Turn on interrupts */ From bad28a37f5e4ab1db5c5f01b77664597b02b257f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 112/258] [PATCH] sata_sil24: fix on-memory structure byteorder Data structures residing on memory and fetched by the controller should have LE ordering. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index a8328a88e8c9..8ef51d0dcda7 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -481,7 +481,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) } /* do SRST */ - prb->ctrl = PRB_CTRL_SRST; + prb->ctrl = cpu_to_le16(PRB_CTRL_SRST); prb->fis[1] = 0; /* no PM yet */ writel((u32)paddr, port + PORT_CMD_ACTIVATE); @@ -597,6 +597,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) union sil24_cmd_block *cb = pp->cmd_block + qc->tag; struct sil24_prb *prb; struct sil24_sge *sge; + u16 ctrl = 0; switch (qc->tf.protocol) { case ATA_PROT_PIO: @@ -604,7 +605,6 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) case ATA_PROT_NODATA: prb = &cb->ata.prb; sge = cb->ata.sge; - prb->ctrl = 0; break; case ATA_PROT_ATAPI: @@ -617,12 +617,10 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { if (qc->tf.flags & ATA_TFLAG_WRITE) - prb->ctrl = PRB_CTRL_PACKET_WRITE; + ctrl = PRB_CTRL_PACKET_WRITE; else - prb->ctrl = PRB_CTRL_PACKET_READ; - } else - prb->ctrl = 0; - + ctrl = PRB_CTRL_PACKET_READ; + } break; default: @@ -631,6 +629,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) BUG(); } + prb->ctrl = cpu_to_le16(ctrl); ata_tf_to_fis(&qc->tf, prb->fis, 0); if (qc->flags & ATA_QCFLAG_DMAMAP) From 26ec634c31a11a003040e10b4d650495158632fd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Apr 2006 22:32:19 +0900 Subject: [PATCH 113/258] [PATCH] sata_sil24: enable 64bit Enable 64bit. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 47 +++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 8ef51d0dcda7..e9fd869140c5 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -485,6 +485,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) prb->fis[1] = 0; /* no PM yet */ writel((u32)paddr, port + PORT_CMD_ACTIVATE); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, @@ -644,6 +645,8 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); writel((u32)paddr, port + PORT_CMD_ACTIVATE); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); + return 0; } @@ -980,22 +983,29 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* * Configure the device */ - /* - * FIXME: This device is certainly 64-bit capable. We just - * don't know how to use it. After fixing 32bit activation in - * this function, enable 64bit masks here. - */ - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - goto out_free; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - goto out_free; + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + goto out_free; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + goto out_free; + } } /* GPIO off */ @@ -1053,9 +1063,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) writel(0x0000, port + PORT_CRC_ERR_CNT); writel(0x0000, port + PORT_HSHK_ERR_CNT); - /* FIXME: 32bit activation? */ - writel(0, port + PORT_ACTIVATE_UPPER_ADDR); - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT); + /* Always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); /* Configure interrupts */ writel(0xffff, port + PORT_IRQ_ENABLE_CLR); From bf2af2a2027e52b653882fbca840620e896ae081 Mon Sep 17 00:00:00 2001 From: Bastiaan Jacques Date: Mon, 17 Apr 2006 14:17:59 +0200 Subject: [PATCH 114/258] [PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 64 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 1b8429cb3c96..d23f00230a76 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -73,6 +73,7 @@ enum { RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ board_ahci = 0, + board_ahci_vt8251 = 1, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -153,6 +154,9 @@ enum { /* hpriv->flags bits */ AHCI_FLAG_MSI = (1 << 0), + + /* ap->flags bits */ + AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), }; struct ahci_cmd_hdr { @@ -255,6 +259,16 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, }, + /* board_ahci_vt8251 */ + { + .sht = &ahci_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + AHCI_FLAG_RESET_NEEDS_CLO, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -296,6 +310,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { board_ahci }, /* ATI SB600 non-raid */ { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ATI SB600 raid */ + { PCI_VENDOR_ID_VIA, 0x3349, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci_vt8251 }, /* VIA VT8251 */ { } /* terminate list */ }; @@ -516,9 +532,29 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); } +static int ahci_clo(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + u32 tmp; + + if (!(hpriv->cap & HOST_CAP_CLO)) + return -EOPNOTSUPP; + + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_CLO; + writel(tmp, port_mmio + PORT_CMD); + + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); + if (tmp & PORT_CMD_CLO) + return -EIO; + + return 0; +} + static int ahci_softreset(struct ata_port *ap, unsigned int *class) { - struct ahci_host_priv *hpriv = ap->host_set->private_data; struct ahci_port_priv *pp = ap->private_data; void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); @@ -547,21 +583,13 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) /* check BUSY/DRQ, perform Command List Override if necessary */ ahci_tf_read(ap, &tf); if (tf.command & (ATA_BUSY | ATA_DRQ)) { - if (!(hpriv->cap & HOST_CAP_CLO)) { - rc = -EIO; - reason = "port busy but no CLO"; + rc = ahci_clo(ap); + + if (rc == -EOPNOTSUPP) { + reason = "port busy but CLO unavailable"; goto fail_restart; - } - - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_CLO; - writel(tmp, port_mmio + PORT_CMD); - - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); - if (tmp & PORT_CMD_CLO) { - rc = -EIO; - reason = "CLO failed"; + } else if (rc) { + reason = "port busy but CLO failed"; goto fail_restart; } } @@ -672,6 +700,12 @@ static void ahci_postreset(struct ata_port *ap, unsigned int *class) static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes) { + if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && + (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { + /* ATA_BUSY hasn't cleared, so send a CLO */ + ahci_clo(ap); + } + return ata_drive_probe_reset(ap, ata_std_probeinit, ahci_softreset, ahci_hardreset, ahci_postreset, classes); From 89f48c4d67dd875cf2216d4402bf77eda41fbdd9 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Mon, 15 May 2006 20:57:18 +0900 Subject: [PATCH 115/258] [PATCH] SCSI: Introduce scsi_req_abort_cmd (REPOST) Introduce scsi_req_abort_cmd(struct scsi_cmnd *). This function requests that SCSI Core start recovery for the command by deleting the timer and adding the command to the eh queue. It can be called by either LLDDs or SCSI Core. LLDDs who implement their own error recovery MAY ignore the timeout event if they generated scsi_req_abort_cmd. First post: http://marc.theaimsgroup.com/?l=linux-scsi&m=113833937421677&w=2 Signed-off-by: Luben Tuikov Signed-off-by: Tejun Heo --- drivers/scsi/scsi.c | 18 ++++++++++++++++++ include/scsi/scsi_cmnd.h | 1 + 2 files changed, 19 insertions(+) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 73994e2ac2cb..dae4f08adde0 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -719,6 +719,24 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq) */ static DEFINE_PER_CPU(struct list_head, scsi_done_q); +/** + * scsi_req_abort_cmd -- Request command recovery for the specified command + * cmd: pointer to the SCSI command of interest + * + * This function requests that SCSI Core start recovery for the + * command by deleting the timer and adding the command to the eh + * queue. It can be called by either LLDDs or SCSI Core. LLDDs who + * implement their own error recovery MAY ignore the timeout event if + * they generated scsi_req_abort_cmd. + */ +void scsi_req_abort_cmd(struct scsi_cmnd *cmd) +{ + if (!scsi_delete_timer(cmd)) + return; + scsi_times_out(cmd); +} +EXPORT_SYMBOL(scsi_req_abort_cmd); + /** * scsi_done - Enqueue the finished SCSI command into the done queue. * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 1ace1b9fe537..88c6c4da6c05 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -151,5 +151,6 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); +extern void scsi_req_abort_cmd(struct scsi_cmnd *cmd); #endif /* _SCSI_SCSI_CMND_H */ From ee7863bc68fa6ad6fe7cfcc0e5ebe9efe0c0664e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:20 +0900 Subject: [PATCH 116/258] [PATCH] SCSI: implement shost->host_eh_scheduled libata needs to invoke EH without scmd. This patch adds shost->host_eh_scheduled to implement such behavior. Currently the only user of this feature is libata and no general interface is defined. This patch simply adds handling for host_eh_scheduled where needed and exports scsi_eh_wakeup() to modules. The rest is upto libata. This is the result of the following discussion. http://thread.gmane.org/gmane.linux.scsi/23853/focus=9760 In short, SCSI host is not supposed to know about exceptions unrelated to specific device or command. Such exceptions should be handled by transport layer proper. However, the distinction is not essential to ATA and libata is planning to depart from SCSI, so, for the time being, libata will be using SCSI EH to handle such exceptions. Signed-off-by: Tejun Heo --- drivers/scsi/scsi_error.c | 3 ++- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/scsi_priv.h | 1 - include/scsi/scsi_eh.h | 1 + include/scsi/scsi_host.h | 1 + 5 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 1c75646f9689..9ca71cbefce0 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -56,6 +56,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) printk("Waking error handler thread\n")); } } +EXPORT_SYMBOL_GPL(scsi_eh_wakeup); /** * scsi_eh_scmd_add - add scsi cmd to error handling. @@ -1517,7 +1518,7 @@ int scsi_error_handler(void *data) */ set_current_state(TASK_INTERRUPTIBLE); while (!kthread_should_stop()) { - if (shost->host_failed == 0 || + if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) || shost->host_failed != shost->host_busy) { SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler scsi_eh_%d sleeping\n", diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 7b0f9a3810d2..c55d195b6f4f 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -566,7 +566,7 @@ void scsi_device_unbusy(struct scsi_device *sdev) spin_lock_irqsave(shost->host_lock, flags); shost->host_busy--; if (unlikely(scsi_host_in_recovery(shost) && - shost->host_failed)) + (shost->host_failed || shost->host_eh_scheduled))) scsi_eh_wakeup(shost); spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 27c48274e8cb..0b39081113be 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -63,7 +63,6 @@ extern int scsi_delete_timer(struct scsi_cmnd *); extern void scsi_times_out(struct scsi_cmnd *cmd); extern int scsi_error_handler(void *host); extern int scsi_decide_disposition(struct scsi_cmnd *cmd); -extern void scsi_eh_wakeup(struct Scsi_Host *shost); extern int scsi_eh_scmd_add(struct scsi_cmnd *, int); /* scsi_lib.c */ diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h index d160880b2a87..212c983a6a18 100644 --- a/include/scsi/scsi_eh.h +++ b/include/scsi/scsi_eh.h @@ -35,6 +35,7 @@ static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr) } +extern void scsi_eh_wakeup(struct Scsi_Host *shost); extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q); extern void scsi_eh_flush_done_q(struct list_head *done_q); diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index de6ce541a046..a42efd6e4be8 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -472,6 +472,7 @@ struct Scsi_Host { */ unsigned int host_busy; /* commands actually active on low-level */ unsigned int host_failed; /* commands that failed. */ + unsigned int host_eh_scheduled; /* EH scheduled without command */ unsigned short host_no; /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */ int resetting; /* if set, it means that last_reset is a valid value */ From c44078c03f018c8cc9d7463b0db4c6c7fb316792 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:21 +0900 Subject: [PATCH 117/258] [PATCH] libata: silly fix in ata_scsi_start_stop_xlat() Don't directly access &qc->tf when tf == &qc->tf. Signed-off-by: Tejun Heo --- drivers/scsi/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 9871f8272df0..b0c83c28d578 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -748,7 +748,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, tf->nsect = 1; /* 1 sector, lba=0 */ if (qc->dev->flags & ATA_DFLAG_LBA) { - qc->tf.flags |= ATA_TFLAG_LBA; + tf->flags |= ATA_TFLAG_LBA; tf->lbah = 0x0; tf->lbam = 0x0; From 3c567b7d1137633f3ff67cd1df94abc5fd497a85 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:23 +0900 Subject: [PATCH 118/258] [PATCH] libata: rename ata_down_sata_spd_limit() and friends Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 32 ++++++++++++++++---------------- drivers/scsi/libata.h | 4 ++-- drivers/scsi/sata_sil24.c | 2 +- include/linux/libata.h | 2 +- 4 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 509178c3700c..196c09ff5e71 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1465,7 +1465,7 @@ static int ata_bus_probe(struct ata_port *ap) tries[dev->devno] = 0; break; case -EIO: - ata_down_sata_spd_limit(ap); + sata_down_spd_limit(ap); /* fall through */ default: tries[dev->devno]--; @@ -1640,12 +1640,12 @@ void ata_port_disable(struct ata_port *ap) } /** - * ata_down_sata_spd_limit - adjust SATA spd limit downward + * sata_down_spd_limit - adjust SATA spd limit downward * @ap: Port to adjust SATA spd limit for * * Adjust SATA spd limit of @ap downward. Note that this * function only adjusts the limit. The change must be applied - * using ata_set_sata_spd(). + * using sata_set_spd(). * * LOCKING: * Inherited from caller. @@ -1653,7 +1653,7 @@ void ata_port_disable(struct ata_port *ap) * RETURNS: * 0 on success, negative errno on failure */ -int ata_down_sata_spd_limit(struct ata_port *ap) +int sata_down_spd_limit(struct ata_port *ap) { u32 spd, mask; int highbit; @@ -1683,7 +1683,7 @@ int ata_down_sata_spd_limit(struct ata_port *ap) return 0; } -static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) +static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) { u32 spd, limit; @@ -1699,7 +1699,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) } /** - * ata_set_sata_spd_needed - is SATA spd configuration needed + * sata_set_spd_needed - is SATA spd configuration needed * @ap: Port in question * * Test whether the spd limit in SControl matches @@ -1713,7 +1713,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ -int ata_set_sata_spd_needed(struct ata_port *ap) +int sata_set_spd_needed(struct ata_port *ap) { u32 scontrol; @@ -1722,11 +1722,11 @@ int ata_set_sata_spd_needed(struct ata_port *ap) scontrol = scr_read(ap, SCR_CONTROL); - return __ata_set_sata_spd_needed(ap, &scontrol); + return __sata_set_spd_needed(ap, &scontrol); } /** - * ata_set_sata_spd - set SATA spd according to spd limit + * sata_set_spd - set SATA spd according to spd limit * @ap: Port to set SATA spd for * * Set SATA spd of @ap according to sata_spd_limit. @@ -1738,7 +1738,7 @@ int ata_set_sata_spd_needed(struct ata_port *ap) * 0 if spd doesn't need to be changed, 1 if spd has been * changed. -EOPNOTSUPP if SCR registers are inaccessible. */ -int ata_set_sata_spd(struct ata_port *ap) +int sata_set_spd(struct ata_port *ap) { u32 scontrol; @@ -1746,7 +1746,7 @@ int ata_set_sata_spd(struct ata_port *ap) return -EOPNOTSUPP; scontrol = scr_read(ap, SCR_CONTROL); - if (!__ata_set_sata_spd_needed(ap, &scontrol)) + if (!__sata_set_spd_needed(ap, &scontrol)) return 0; scr_write(ap, SCR_CONTROL, scontrol); @@ -2464,7 +2464,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) DPRINTK("ENTER\n"); - if (ata_set_sata_spd_needed(ap)) { + if (sata_set_spd_needed(ap)) { /* SATA spec says nothing about how to reconfigure * spd. To be on the safe side, turn off phy during * reconfiguration. This works for at least ICH7 AHCI @@ -2474,7 +2474,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) scontrol = (scontrol & 0x0f0) | 0x302; scr_write_flush(ap, SCR_CONTROL, scontrol); - ata_set_sata_spd(ap); + sata_set_spd(ap); } /* issue phy wake/reset */ @@ -2657,7 +2657,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (probeinit) probeinit(ap); - if (softreset && !ata_set_sata_spd_needed(ap)) { + if (softreset && !sata_set_spd_needed(ap)) { rc = ata_do_reset(ap, softreset, postreset, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; @@ -2677,7 +2677,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, break; } - if (ata_down_sata_spd_limit(ap)) + if (sata_down_spd_limit(ap)) goto done; printk(KERN_INFO "ata%u: hardreset failed, will retry " @@ -5113,7 +5113,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); EXPORT_SYMBOL_GPL(ata_bmdma_status); EXPORT_SYMBOL_GPL(ata_bmdma_stop); EXPORT_SYMBOL_GPL(ata_port_probe); -EXPORT_SYMBOL_GPL(ata_set_sata_spd); +EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 3f8b0a863781..26975df9a3fc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -51,8 +51,8 @@ extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen); -extern int ata_down_sata_spd_limit(struct ata_port *ap); -extern int ata_set_sata_spd_needed(struct ata_port *ap); +extern int sata_down_spd_limit(struct ata_port *ap); +extern int sata_set_spd_needed(struct ata_port *ap); extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, int force_pio0); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index e9fd869140c5..8c167250f4c9 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -528,7 +528,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) u32 tmp; /* sil24 does the right thing(tm) without any protection */ - ata_set_sata_spd(ap); + sata_set_spd(ap); tout_msec = 100; if (sata_dev_present(ap)) diff --git a/include/linux/libata.h b/include/linux/libata.h index d35b1e3bb7e0..0b67aafd3878 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -504,7 +504,7 @@ extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); extern void ata_bus_reset(struct ata_port *ap); -extern int ata_set_sata_spd(struct ata_port *ap); +extern int sata_set_spd(struct ata_port *ap); extern int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, From e4fac92ae744cd5d5c3c1774825788e6b91a5965 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:25 +0900 Subject: [PATCH 119/258] [PATCH] ahci: hardreset classification fix AHCI calls ata_dev_classify() even when no device is attached which results in false class code. Fix it. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index d23f00230a76..c33255404ee5 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -670,7 +670,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) rc = sata_std_hardreset(ap, class); ahci_start_engine(ap); - if (rc == 0) + if (rc == 0 && sata_dev_present(ap)) *class = ahci_dev_classify(ap); if (*class == ATA_DEV_UNKNOWN) *class = ATA_DEV_NONE; From e23befe9018319dc218e2e51c20ce480e6b45eeb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:27 +0900 Subject: [PATCH 120/258] [PATCH] libata: unexport ata_scsi_error() While moving ata_scsi_error() from LLDD sht to libata transportt, EXPORT_SYMBOL_GPL() entry was left out. Kill it. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 196c09ff5e71..85a004290072 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5161,7 +5161,6 @@ EXPORT_SYMBOL_GPL(ata_device_resume); EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); -EXPORT_SYMBOL_GPL(ata_scsi_error); EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); From 6cd727b14f1a6cdcb088d1067c1ba0ba124806a7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:28 +0900 Subject: [PATCH 121/258] [PATCH] libata: kill duplicate prototypes Kill duplicate prototypes for ata_eh_qc_complete/retry() in libata.h. Signed-off-by: Tejun Heo --- include/linux/libata.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 0b67aafd3878..220b9d7bfc28 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -530,8 +530,6 @@ extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); -extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern int ata_scsi_device_resume(struct scsi_device *); From f8c2c4202d86e14ca03b7adc7ebcb30fc74b24e1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:30 +0900 Subject: [PATCH 122/258] [PATCH] libata: fix ->phy_reset class code handling in ata_bus_probe() ata_bus_probe() doesn't clear dev->class after ->phy_reset(). This can result in falsely enabled devices if probing fails. Clear dev->class to ATA_DEV_UNKNOWN after fetching it. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 85a004290072..1669dae53ce3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1397,9 +1397,11 @@ static int ata_bus_probe(struct ata_port *ap) } else { ap->ops->phy_reset(ap); - if (!(ap->flags & ATA_FLAG_DISABLED)) - for (i = 0; i < ATA_MAX_DEVICES; i++) + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (!(ap->flags & ATA_FLAG_DISABLED)) classes[i] = ap->device[i].class; + ap->device[i].class = ATA_DEV_UNKNOWN; + } ata_port_probe(ap); } From 7401abf2f44695ef44eef47d5deba1c20214a063 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:32 +0900 Subject: [PATCH 123/258] [PATCH] libata: clear ap->active_tag atomically w.r.t. command completion ap->active_tag was cleared in ata_qc_free(). This left ap->active_tag dangling after ata_qc_complete(). Spurious interrupts inbetween could incorrectly access the qc. Clear active_tag in ata_qc_complete(). This change is necessary for later EH changes. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1669dae53ce3..86cd0e0895d0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4083,8 +4083,6 @@ void ata_qc_free(struct ata_queued_cmd *qc) qc->flags = 0; tag = qc->tag; if (likely(ata_tag_valid(tag))) { - if (tag == ap->active_tag) - ap->active_tag = ATA_TAG_POISON; qc->tag = ATA_TAG_POISON; clear_bit(tag, &ap->qactive); } @@ -4098,6 +4096,9 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); + /* command should be marked inactive atomically with qc completion */ + qc->ap->active_tag = ATA_TAG_POISON; + /* atapi: mark qc as inactive to prevent the interrupt handler * from completing the command twice later, before the error handler * is called. (when rc != 0 and atapi request sense is needed) From 158693031d7c58a355ec1852052a4fca75fd3bda Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:33 +0900 Subject: [PATCH 124/258] [PATCH] libata: hold host_set lock while finishing internal qc Hold host_set lock while finishing internal qc. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 86cd0e0895d0..13bce43f1915 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1031,6 +1031,9 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, spin_unlock_irqrestore(&ap->host_set->lock, flags); } + /* finish up */ + spin_lock_irqsave(&ap->host_set->lock, flags); + *tf = qc->tf; err_mask = qc->err_mask; @@ -1052,6 +1055,8 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, ata_port_probe(ap); } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + return err_mask; } From fe635c7e91036282e4fd0cc5b4eebc712e43270d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:35 +0900 Subject: [PATCH 125/258] [PATCH] libata: use preallocated buffers It's not a very good idea to allocate memory during EH. Use statically allocated buffer for dev->id[] and add 512byte buffer ap->sector_buf. This buffer is owned by EH (or probing) and to be used as temporary buffer for various purposes (IDENTIFY, NCQ log page 10h, PM GSCR block). Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 32 ++++++++------------------------ include/linux/libata.h | 4 +++- 2 files changed, 11 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 13bce43f1915..af55861a96e2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1099,7 +1099,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * @dev: target device * @p_class: pointer to class of the target device (may be changed) * @post_reset: is this read ID post-reset? - * @p_id: read IDENTIFY page (newly allocated) + * @id: buffer to read IDENTIFY data into * * Read ID data from the specified device. ATA_CMD_ID_ATA is * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI @@ -1113,12 +1113,11 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * 0 on success, -errno otherwise. */ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, - unsigned int *p_class, int post_reset, u16 **p_id) + unsigned int *p_class, int post_reset, u16 *id) { unsigned int class = *p_class; struct ata_taskfile tf; unsigned int err_mask = 0; - u16 *id; const char *reason; int rc; @@ -1126,13 +1125,6 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL); - if (id == NULL) { - rc = -ENOMEM; - reason = "out of memory"; - goto err_out; - } - retry: ata_tf_init(ap, &tf, dev->devno); @@ -1194,13 +1186,12 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, } *p_class = class; - *p_id = id; + return 0; err_out: printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", ap->id, dev->devno, reason); - kfree(id); return rc; } @@ -1425,9 +1416,7 @@ static int ata_bus_probe(struct ata_port *ap) if (!ata_dev_enabled(dev)) continue; - kfree(dev->id); - dev->id = NULL; - rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id); + rc = ata_dev_read_id(ap, dev, &dev->class, 1, dev->id); if (rc) goto fail; @@ -2788,7 +2777,7 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, int post_reset) { unsigned int class = dev->class; - u16 *id = NULL; + u16 *id = (void *)ap->sector_buf; int rc; if (!ata_dev_enabled(dev)) { @@ -2796,8 +2785,8 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, goto fail; } - /* allocate & read ID data */ - rc = ata_dev_read_id(ap, dev, &class, post_reset, &id); + /* read ID data */ + rc = ata_dev_read_id(ap, dev, &class, post_reset, id); if (rc) goto fail; @@ -2807,8 +2796,7 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, goto fail; } - kfree(dev->id); - dev->id = id; + memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); /* configure device according to the new ID */ rc = ata_dev_configure(ap, dev, 0); @@ -2818,7 +2806,6 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, fail: printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", ap->id, dev->devno, rc); - kfree(id); return rc; } @@ -4873,14 +4860,11 @@ void ata_host_set_remove(struct ata_host_set *host_set) int ata_scsi_release(struct Scsi_Host *host) { struct ata_port *ap = ata_shost_to_port(host); - int i; DPRINTK("ENTER\n"); ap->ops->port_disable(ap); ata_host_remove(ap, 0); - for (i = 0; i < ATA_MAX_DEVICES; i++) - kfree(ap->device[i].id); DPRINTK("EXIT\n"); return 1; diff --git a/include/linux/libata.h b/include/linux/libata.h index 220b9d7bfc28..0e1a3be39475 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -360,7 +360,7 @@ struct ata_device { unsigned long flags; /* ATA_DFLAG_xxx */ unsigned int class; /* ATA_DEV_xxx */ unsigned int devno; /* 0 or 1 */ - u16 *id; /* IDENTIFY xxx DEVICE data */ + u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u8 pio_mode; u8 dma_mode; u8 xfer_mode; @@ -425,6 +425,8 @@ struct ata_port { struct list_head eh_done_q; void *private_data; + + u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ }; struct ata_port_operations { From 3adcebb2b59d590d572844815c906ca30477b14a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:37 +0900 Subject: [PATCH 126/258] [PATCH] libata: move ->set_mode() handling into ata_set_mode() Move ->set_mode() handlng into ata_set_mode(). Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index af55861a96e2..1efe8a1ba81d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1426,20 +1426,7 @@ static int ata_bus_probe(struct ata_port *ap) } /* configure transfer mode */ - if (ap->ops->set_mode) { - /* FIXME: make ->set_mode handle no device case and - * return error code and failing device on failure as - * ata_set_mode() does. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) { - ap->ops->set_mode(ap); - break; - } - rc = 0; - } else - rc = ata_set_mode(ap, &dev); - + rc = ata_set_mode(ap, &dev); if (rc) { down_xfermask = 1; goto fail; @@ -1997,6 +1984,20 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) struct ata_device *dev; int i, rc = 0, used_dma = 0, found = 0; + /* has private set_mode? */ + if (ap->ops->set_mode) { + /* FIXME: make ->set_mode handle no device case and + * return error code and failing device on failure. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (ata_dev_enabled(&ap->device[i])) { + ap->ops->set_mode(ap); + break; + } + } + return 0; + } + /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { unsigned int pio_mask, dma_mask; From 96bd39ec295e49443c8b0c25a6b69fdace18780f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:38 +0900 Subject: [PATCH 127/258] [PATCH] libata: remove postreset handling from ata_do_reset() Make ata_do_reset() deal only with reset. postreset is now the responsibility of the caller. This is simpler and eases later prereset addition. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 19 ++++++++++--------- drivers/scsi/libata.h | 2 +- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1efe8a1ba81d..19ae3fa1cfcb 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2585,7 +2585,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) } int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - ata_postreset_fn_t postreset, unsigned int *classes) + unsigned int *classes) { int i, rc; @@ -2609,9 +2609,6 @@ int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, if (classes[i] == ATA_DEV_UNKNOWN) classes[i] = ATA_DEV_NONE; - if (postreset) - postreset(ap, classes); - return 0; } @@ -2655,7 +2652,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, probeinit(ap); if (softreset && !sata_set_spd_needed(ap)) { - rc = ata_do_reset(ap, softreset, postreset, classes); + rc = ata_do_reset(ap, softreset, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; printk(KERN_INFO "ata%u: softreset failed, will try " @@ -2667,7 +2664,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, goto done; while (1) { - rc = ata_do_reset(ap, hardreset, postreset, classes); + rc = ata_do_reset(ap, hardreset, classes); if (rc == 0) { if (classes[0] != ATA_DEV_UNKNOWN) goto done; @@ -2688,12 +2685,16 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, ap->id); ssleep(5); - rc = ata_do_reset(ap, softreset, postreset, classes); + rc = ata_do_reset(ap, softreset, classes); } done: - if (rc == 0 && classes[0] == ATA_DEV_UNKNOWN) - rc = -ENODEV; + if (rc == 0) { + if (postreset) + postreset(ap, classes); + if (classes[0] == ATA_DEV_UNKNOWN) + rc = -ENODEV; + } return rc; } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 26975df9a3fc..6442c2f1a80c 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -57,7 +57,7 @@ extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, int force_pio0); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); extern int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - ata_postreset_fn_t postreset, unsigned int *classes); + unsigned int *classes); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); From e61e067227bc76b4d9411a50d735c9d87f27b0e2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:40 +0900 Subject: [PATCH 128/258] [PATCH] libata: implement qc->result_tf Add qc->result_tf and ATA_QCFLAG_RESULT_TF. This moves the responsibility of loading result TF from post-compltion path to qc execution path. qc->result_tf is loaded if explicitly requested or the qc failsa. This allows more efficient completion implementation and correct handling of result TF for controllers which don't have global TF representation such as sil3124/32. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 4 ++-- drivers/scsi/libata-scsi.c | 18 +++++++----------- include/linux/libata.h | 16 ++++++++++++++-- 3 files changed, 23 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 19ae3fa1cfcb..51cb9ca5519c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -955,7 +955,6 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) { struct completion *waiting = qc->private_data; - qc->ap->ops->tf_read(qc->ap, &qc->tf); complete(waiting); } @@ -997,6 +996,7 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { ata_sg_init_one(qc, buf, buflen); @@ -1034,7 +1034,7 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, /* finish up */ spin_lock_irqsave(&ap->host_set->lock, flags); - *tf = qc->tf; + *tf = qc->result_tf; err_mask = qc->err_mask; ata_qc_free(qc); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index b0c83c28d578..ce90b6352a81 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -537,7 +537,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; + struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; unsigned char *desc = sb + 8; @@ -608,7 +608,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) void ata_gen_fixed_sense(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; + struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); @@ -1199,14 +1199,11 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) */ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && ((cdb[2] & 0x20) || need_sense)) { - qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } else { if (!need_sense) { cmd->result = SAM_STAT_GOOD; } else { - qc->ap->ops->tf_read(qc->ap, &qc->tf); - /* TODO: decide which descriptor format to use * for 48b LBA devices and call that here * instead of the fixed desc, which is only @@ -1217,10 +1214,8 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } - if (need_sense) { - /* The ata_gen_..._sense routines fill in tf */ - ata_dump_status(qc->ap->id, &qc->tf); - } + if (need_sense) + ata_dump_status(qc->ap->id, &qc->result_tf); qc->scsidone(cmd); @@ -2004,7 +1999,6 @@ static void atapi_sense_complete(struct ata_queued_cmd *qc) * a sense descriptors, since that's only * correct for ATA, not ATAPI */ - qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } @@ -2080,7 +2074,6 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) * a sense descriptors, since that's only * correct for ATA, not ATAPI */ - qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } else { u8 *scsicmd = cmd->cmnd; @@ -2361,6 +2354,9 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) */ qc->nsect = cmd->bufflen / ATA_SECT_SIZE; + /* request result TF */ + qc->flags |= ATA_QCFLAG_RESULT_TF; + return 0; invalid_fld: diff --git a/include/linux/libata.h b/include/linux/libata.h index 0e1a3be39475..a4b8a419caad 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -162,7 +162,9 @@ enum { ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */ ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ - ATA_QCFLAG_EH_SCHEDULED = (1 << 4), /* EH scheduled */ + ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ + + ATA_QCFLAG_EH_SCHEDULED = (1 << 16), /* EH scheduled */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */ @@ -343,7 +345,7 @@ struct ata_queued_cmd { struct scatterlist *__sg; unsigned int err_mask; - + struct ata_taskfile result_tf; ata_qc_cb_t complete_fn; void *private_data; @@ -824,6 +826,10 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->err_mask = 0; ata_tf_init(qc->ap, &qc->tf, qc->dev->devno); + + /* init result_tf such that it indicates normal completion */ + qc->result_tf.command = ATA_DRDY; + qc->result_tf.feature = 0; } /** @@ -839,9 +845,15 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) */ static inline void ata_qc_complete(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; + if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED)) return; + /* read result TF if failed or requested */ + if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + __ata_qc_complete(qc); } From ce5f7f3d0cab82d6c16fcb64def8bfc0a3a85dd6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:42 +0900 Subject: [PATCH 129/258] [PATCH] sata_sil24: update TF image only when necessary Update TF image (pp->tf) only when necessary. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 8c167250f4c9..45b9e37c191e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -799,17 +799,9 @@ static inline void sil24_host_intr(struct ata_port *ap) if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - /* - * !HOST_SSAT_ATTN guarantees successful completion, - * so reading back tf registers is unnecessary for - * most commands. TODO: read tf registers for - * commands which require these values on successful - * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER, - * DEVICE RESET and READ PORT MULTIPLIER (any more?). - */ - sil24_update_tf(ap); - if (qc) { + if (qc->flags & ATA_QCFLAG_RESULT_TF) + sil24_update_tf(ap); qc->err_mask |= ac_err_mask(pp->tf.command); ata_qc_complete(qc); } From 838df6284c54447efae956fb9c243d8ba4ab0f47 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:44 +0900 Subject: [PATCH 130/258] [PATCH] libata: init ap->cbl to ATA_CBL_SATA early Init ap->cbl to ATA_CBL_SATA in ata_host_init(). This is necessary for soon-to-follow SCR handling function changes. LLDDs are free to change ap->cbl during probing. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 51cb9ca5519c..f29d43cb6991 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2370,8 +2370,7 @@ void ata_std_probeinit(struct ata_port *ap) if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) { u32 spd; - /* set cable type and resume link */ - ap->cbl = ATA_CBL_SATA; + /* resume link */ sata_phy_resume(ap); /* init sata_spd_limit to the current value */ @@ -4586,7 +4585,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->udma_mask = ent->udma_mask; ap->flags |= ent->host_flags; ap->ops = ent->port_ops; - ap->cbl = ATA_CBL_NONE; ap->sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; @@ -4594,6 +4592,11 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, INIT_WORK(&ap->port_task, NULL, NULL); INIT_LIST_HEAD(&ap->eh_done_q); + /* set cable type */ + ap->cbl = ATA_CBL_NONE; + if (ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; + for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; dev->devno = i; From 34bf21704c848fe00c516d1c8f163db08b70b137 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:46 +0900 Subject: [PATCH 131/258] [PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 143 +++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 6 ++ 2 files changed, 149 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f29d43cb6991..b9c5cbf0b786 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4365,6 +4365,143 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } +/** + * sata_scr_valid - test whether SCRs are accessible + * @ap: ATA port to test SCR accessibility for + * + * Test whether SCRs are accessible for @ap. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if SCRs are accessible, 0 otherwise. + */ +int sata_scr_valid(struct ata_port *ap) +{ + return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; +} + +/** + * sata_scr_read - read SCR register of the specified port + * @ap: ATA port to read SCR for + * @reg: SCR to read + * @val: Place to store read value + * + * Read SCR register @reg of @ap into *@val. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_read(struct ata_port *ap, int reg, u32 *val) +{ + if (sata_scr_valid(ap)) { + *val = ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write - write SCR register of the specified port + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * Write @val to SCR register @reg of @ap. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write_flush - write SCR register of the specified port and flush + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * This function is identical to sata_scr_write() except that this + * function performs flush after writing to the register. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * ata_port_online - test whether the given port is online + * @ap: ATA port to test + * + * Test whether @ap is online. Note that this function returns 0 + * if online status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port online status is available and online. + */ +int ata_port_online(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) + return 1; + return 0; +} + +/** + * ata_port_offline - test whether the given port is offline + * @ap: ATA port to test + * + * Test whether @ap is offline. Note that this function returns + * 0 if offline status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port offline status is available and offline. + */ +int ata_port_offline(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) + return 1; + return 0; +} /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, @@ -5133,6 +5270,12 @@ EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); +EXPORT_SYMBOL_GPL(sata_scr_valid); +EXPORT_SYMBOL_GPL(sata_scr_read); +EXPORT_SYMBOL_GPL(sata_scr_write); +EXPORT_SYMBOL_GPL(sata_scr_write_flush); +EXPORT_SYMBOL_GPL(ata_port_online); +EXPORT_SYMBOL_GPL(ata_port_offline); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); diff --git a/include/linux/libata.h b/include/linux/libata.h index a4b8a419caad..47b97157995d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -536,6 +536,12 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int sata_scr_valid(struct ata_port *ap); +extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val); +extern int sata_scr_write(struct ata_port *ap, int reg, u32 val); +extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val); +extern int ata_port_online(struct ata_port *ap); +extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); extern int ata_device_resume(struct ata_port *, struct ata_device *); From 81952c5497b40ae56835bd0d6537f8c6bdea07e7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:47 +0900 Subject: [PATCH 132/258] [PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 6 +-- drivers/scsi/libata-core.c | 107 +++++++++++++++++++++---------------- drivers/scsi/sata_mv.c | 16 +++--- drivers/scsi/sata_sil24.c | 6 +-- 4 files changed, 75 insertions(+), 60 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c33255404ee5..c2298fb131d8 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -567,7 +567,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) DPRINTK("ENTER\n"); - if (!sata_dev_present(ap)) { + if (ata_port_offline(ap)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; return 0; @@ -640,7 +640,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) msleep(150); *class = ATA_DEV_NONE; - if (sata_dev_present(ap)) { + if (ata_port_online(ap)) { if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { rc = -EIO; reason = "device not ready"; @@ -670,7 +670,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) rc = sata_std_hardreset(ap, class); ahci_start_engine(ap); - if (rc == 0 && sata_dev_present(ap)) + if (rc == 0 && ata_port_online(ap)) *class = ahci_dev_classify(ap); if (*class == ATA_DEV_UNKNOWN) *class = ATA_DEV_NONE; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b9c5cbf0b786..56f0af208345 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1494,13 +1494,11 @@ static void sata_print_link_status(struct ata_port *ap) { u32 sstatus, scontrol, tmp; - if (!ap->ops->scr_read) + if (sata_scr_read(ap, SCR_STATUS, &sstatus)) return; + sata_scr_read(ap, SCR_CONTROL, &scontrol); - sstatus = scr_read(ap, SCR_STATUS); - scontrol = scr_read(ap, SCR_CONTROL); - - if (sata_dev_present(ap)) { + if (ata_port_online(ap)) { tmp = (sstatus >> 4) & 0xf; printk(KERN_INFO "ata%u: SATA link up %s (SStatus %X SControl %X)\n", @@ -1531,17 +1529,18 @@ void __sata_phy_reset(struct ata_port *ap) if (ap->flags & ATA_FLAG_SATA_RESET) { /* issue phy wake/reset */ - scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); /* Couldn't find anything in SATA I/II specs, but * AHCI-1.1 10.4.2 says at least 1 ms. */ mdelay(1); } - scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */ + /* phy wake/clear reset */ + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); /* wait for phy to become ready, if necessary */ do { msleep(200); - sstatus = scr_read(ap, SCR_STATUS); + sata_scr_read(ap, SCR_STATUS, &sstatus); if ((sstatus & 0xf) != 1) break; } while (time_before(jiffies, timeout)); @@ -1550,7 +1549,7 @@ void __sata_phy_reset(struct ata_port *ap) sata_print_link_status(ap); /* TODO: phy layer with polling, timeouts, etc. */ - if (sata_dev_present(ap)) + if (!ata_port_offline(ap)) ata_port_probe(ap); else ata_port_disable(ap); @@ -1638,11 +1637,12 @@ void ata_port_disable(struct ata_port *ap) */ int sata_down_spd_limit(struct ata_port *ap) { - u32 spd, mask; - int highbit; + u32 sstatus, spd, mask; + int rc, highbit; - if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read) - return -EOPNOTSUPP; + rc = sata_scr_read(ap, SCR_STATUS, &sstatus); + if (rc) + return rc; mask = ap->sata_spd_limit; if (mask <= 1) @@ -1650,7 +1650,7 @@ int sata_down_spd_limit(struct ata_port *ap) highbit = fls(mask) - 1; mask &= ~(1 << highbit); - spd = (scr_read(ap, SCR_STATUS) >> 4) & 0xf; + spd = (sstatus >> 4) & 0xf; if (spd <= 1) return -EINVAL; spd--; @@ -1700,11 +1700,9 @@ int sata_set_spd_needed(struct ata_port *ap) { u32 scontrol; - if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read) + if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) return 0; - scontrol = scr_read(ap, SCR_CONTROL); - return __sata_set_spd_needed(ap, &scontrol); } @@ -1719,20 +1717,22 @@ int sata_set_spd_needed(struct ata_port *ap) * * RETURNS: * 0 if spd doesn't need to be changed, 1 if spd has been - * changed. -EOPNOTSUPP if SCR registers are inaccessible. + * changed. Negative errno if SCR registers are inaccessible. */ int sata_set_spd(struct ata_port *ap) { u32 scontrol; + int rc; - if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read) - return -EOPNOTSUPP; + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; - scontrol = scr_read(ap, SCR_CONTROL); if (!__sata_set_spd_needed(ap, &scontrol)) return 0; - scr_write(ap, SCR_CONTROL, scontrol); + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + return 1; } @@ -2336,20 +2336,26 @@ static int sata_phy_resume(struct ata_port *ap) { unsigned long timeout = jiffies + (HZ * 5); u32 scontrol, sstatus; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; - scontrol = scr_read(ap, SCR_CONTROL); scontrol = (scontrol & 0x0f0) | 0x300; - scr_write_flush(ap, SCR_CONTROL, scontrol); + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; /* Wait for phy to become ready, if necessary. */ do { msleep(200); - sstatus = scr_read(ap, SCR_STATUS); + if ((rc = sata_scr_read(ap, SCR_STATUS, &sstatus))) + return rc; if ((sstatus & 0xf) != 1) return 0; } while (time_before(jiffies, timeout)); - return -1; + return -EBUSY; } /** @@ -2367,21 +2373,20 @@ static int sata_phy_resume(struct ata_port *ap) */ void ata_std_probeinit(struct ata_port *ap) { - if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) { - u32 spd; + u32 scontrol; - /* resume link */ - sata_phy_resume(ap); + /* resume link */ + sata_phy_resume(ap); - /* init sata_spd_limit to the current value */ - spd = (scr_read(ap, SCR_CONTROL) & 0xf0) >> 4; - if (spd) - ap->sata_spd_limit &= (1 << spd) - 1; - - /* wait for device */ - if (sata_dev_present(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + /* init sata_spd_limit to the current value */ + if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + int spd = (scontrol >> 4) & 0xf; + ap->sata_spd_limit &= (1 << spd) - 1; } + + /* wait for device */ + if (ata_port_online(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); } /** @@ -2406,7 +2411,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) DPRINTK("ENTER\n"); - if (ap->ops->scr_read && !sata_dev_present(ap)) { + if (ata_port_offline(ap)) { classes[0] = ATA_DEV_NONE; goto out; } @@ -2457,6 +2462,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) int sata_std_hardreset(struct ata_port *ap, unsigned int *class) { u32 scontrol; + int rc; DPRINTK("ENTER\n"); @@ -2466,17 +2472,25 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) * reconfiguration. This works for at least ICH7 AHCI * and Sil3124. */ - scontrol = scr_read(ap, SCR_CONTROL); + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + scontrol = (scontrol & 0x0f0) | 0x302; - scr_write_flush(ap, SCR_CONTROL, scontrol); + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; sata_set_spd(ap); } /* issue phy wake/reset */ - scontrol = scr_read(ap, SCR_CONTROL); + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + scontrol = (scontrol & 0x0f0) | 0x301; - scr_write_flush(ap, SCR_CONTROL, scontrol); + + if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) + return rc; /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. @@ -2487,7 +2501,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) sata_phy_resume(ap); /* TODO: phy layer with polling, timeouts, etc. */ - if (!sata_dev_present(ap)) { + if (ata_port_offline(ap)) { *class = ATA_DEV_NONE; DPRINTK("EXIT, link offline\n"); return 0; @@ -2527,8 +2541,7 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) DPRINTK("ENTER\n"); /* print link status */ - if (ap->cbl == ATA_CBL_SATA) - sata_print_link_status(ap); + sata_print_link_status(ap); /* re-enable interrupts */ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ @@ -2575,7 +2588,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) ata_reset_fn_t hardreset; hardreset = NULL; - if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read) + if (sata_scr_valid(ap)) hardreset = sata_std_hardreset; return ata_drive_probe_reset(ap, ata_std_probeinit, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 181917ac0426..748569b615fc 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1309,8 +1309,8 @@ static void mv_err_intr(struct ata_port *ap) edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); if (EDMA_ERR_SERR & edma_err_cause) { - serr = scr_read(ap, SCR_ERROR); - scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(ap, SCR_ERROR, &serr); + sata_scr_write_flush(ap, SCR_ERROR, serr); } if (EDMA_ERR_SELF_DIS & edma_err_cause) { struct mv_port_priv *pp = ap->private_data; @@ -1934,15 +1934,16 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) /* Issue COMRESET via SControl */ comreset_retry: - scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); __msleep(1, can_sleep); - scr_write_flush(ap, SCR_CONTROL, 0x300); + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); __msleep(20, can_sleep); timeout = jiffies + msecs_to_jiffies(200); do { - sstatus = scr_read(ap, SCR_STATUS) & 0x3; + sata_scr_read(ap, SCR_STATUS, &sstatus); + sstatus &= 0x3; if ((sstatus == 3) || (sstatus == 0)) break; @@ -1959,11 +1960,12 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - if (sata_dev_present(ap)) { + if (ata_port_online(ap)) { ata_port_probe(ap); } else { + sata_scr_read(ap, SCR_STATUS, &sstatus); printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", - ap->id, scr_read(ap, SCR_STATUS)); + ap->id, sstatus); ata_port_disable(ap); return; } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 45b9e37c191e..bedc787dafd1 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -464,7 +464,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) DPRINTK("ENTER\n"); - if (!sata_dev_present(ap)) { + if (ata_port_offline(ap)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; goto out; @@ -531,7 +531,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) sata_set_spd(ap); tout_msec = 100; - if (sata_dev_present(ap)) + if (ata_port_online(ap)) tout_msec = 5000; writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); @@ -544,7 +544,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) msleep(100); if (tmp & PORT_CS_DEV_RST) { - if (!sata_dev_present(ap)) + if (ata_port_offline(ap)) return 0; reason = "link not ready"; goto err; From a0ab51cefc95cb7756c4914603fea2b1a0f813c5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:49 +0900 Subject: [PATCH 133/258] [PATCH] libata: kill old SCR functions and sata_dev_present() Kill now unused scr_{read|write|write_flush}() and sata_dev_present(). Signed-off-by: Tejun Heo --- include/linux/libata.h | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 47b97157995d..cd467cd54473 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -939,28 +939,6 @@ static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) return status; } -static inline u32 scr_read(struct ata_port *ap, unsigned int reg) -{ - return ap->ops->scr_read(ap, reg); -} - -static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val) -{ - ap->ops->scr_write(ap, reg, val); -} - -static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, - u32 val) -{ - ap->ops->scr_write(ap, reg, val); - (void) ap->ops->scr_read(ap, reg); -} - -static inline unsigned int sata_dev_present(struct ata_port *ap) -{ - return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0; -} - static inline int ata_try_flush_cache(const struct ata_device *dev) { return ata_id_wcache_enabled(dev->id) || From 38d87234d6c47ca487fc6344100323d5adc6f32c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:51 +0900 Subject: [PATCH 134/258] [PATCH] libata: add dev->ap Add dev->ap which points back to the port the device belongs to. This makes it unnecessary to pass @ap for silly reasons (e.g. printks). Also, this change is necessary to accomodate later PM support which will introduce ATA link inbetween port and device. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 + include/linux/libata.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 56f0af208345..31b65e0da0b1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4749,6 +4749,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; + dev->ap = ap; dev->devno = i; dev->pio_mask = UINT_MAX; dev->mwdma_mask = UINT_MAX; diff --git a/include/linux/libata.h b/include/linux/libata.h index cd467cd54473..ac2d2cc78b10 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -358,6 +358,7 @@ struct ata_host_stats { }; struct ata_device { + struct ata_port *ap; u64 n_sectors; /* size of device, if ATA */ unsigned long flags; /* ATA_DFLAG_xxx */ unsigned int class; /* ATA_DEV_xxx */ From 3373efd89dead4ce7818d685729e0431448357c9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:53 +0900 Subject: [PATCH 135/258] [PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 2 +- drivers/scsi/libata-core.c | 160 +++++++++++++++++-------------------- drivers/scsi/libata-scsi.c | 40 ++++------ drivers/scsi/libata.h | 11 +-- include/linux/libata.h | 21 +++-- 5 files changed, 106 insertions(+), 128 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c2298fb131d8..f6e4c8ea74e3 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -597,7 +597,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) /* restart engine */ ahci_start_engine(ap); - ata_tf_init(ap, &tf, 0); + ata_tf_init(ap->device, &tf); fis = pp->cmd_tbl; /* issue the first D2H Register FIS */ diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 31b65e0da0b1..4ced962db812 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,13 +61,10 @@ #include "libata.h" -static unsigned int ata_dev_init_params(struct ata_port *ap, - struct ata_device *dev, - u16 heads, - u16 sectors); -static unsigned int ata_dev_set_xfermode(struct ata_port *ap, - struct ata_device *dev); -static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors); +static unsigned int ata_dev_set_xfermode(struct ata_device *dev); +static void ata_dev_xfermask(struct ata_device *dev); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; @@ -412,11 +409,11 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) +void ata_dev_disable(struct ata_device *dev) { if (ata_dev_enabled(dev)) { printk(KERN_WARNING "ata%u: dev %u disabled\n", - ap->id, dev->devno); + dev->ap->id, dev->devno); dev->class++; } } @@ -960,7 +957,6 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) /** * ata_exec_internal - execute libata internal command - * @ap: Port to which the command is sent * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command @@ -978,10 +974,11 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) * None. Should be called with kernel context, might sleep. */ -unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, +unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen) { + struct ata_port *ap = dev->ap; u8 command = tf->command; struct ata_queued_cmd *qc; DECLARE_COMPLETION(wait); @@ -990,7 +987,7 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, spin_lock_irqsave(&ap->host_set->lock, flags); - qc = ata_qc_new_init(ap, dev); + qc = ata_qc_new_init(dev); BUG_ON(qc == NULL); qc->tf = *tf; @@ -1095,7 +1092,6 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) /** * ata_dev_read_id - Read ID data from the specified device - * @ap: port on which target device resides * @dev: target device * @p_class: pointer to class of the target device (may be changed) * @post_reset: is this read ID post-reset? @@ -1112,9 +1108,10 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * RETURNS: * 0 on success, -errno otherwise. */ -static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, - unsigned int *p_class, int post_reset, u16 *id) +static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id) { + struct ata_port *ap = dev->ap; unsigned int class = *p_class; struct ata_taskfile tf; unsigned int err_mask = 0; @@ -1126,7 +1123,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ retry: - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); switch (class) { case ATA_DEV_ATA: @@ -1143,7 +1140,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, tf.protocol = ATA_PROT_PIO; - err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_FROM_DEVICE, + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { rc = -EIO; @@ -1170,7 +1167,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, * Some drives were very specific about that exact sequence. */ if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { - err_mask = ata_dev_init_params(ap, dev, id[3], id[6]); + err_mask = ata_dev_init_params(dev, id[3], id[6]); if (err_mask) { rc = -EIO; reason = "INIT_DEV_PARAMS failed"; @@ -1195,15 +1192,13 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, return rc; } -static inline u8 ata_dev_knobble(const struct ata_port *ap, - struct ata_device *dev) +static inline u8 ata_dev_knobble(struct ata_device *dev) { - return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); + return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } /** * ata_dev_configure - Configure the specified ATA/ATAPI device - * @ap: Port on which target device resides * @dev: Target device to configure * @print_info: Enable device info printout * @@ -1216,9 +1211,9 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap, * RETURNS: * 0 on success, -errno otherwise */ -static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, - int print_info) +static int ata_dev_configure(struct ata_device *dev, int print_info) { + struct ata_port *ap = dev->ap; const u16 *id = dev->id; unsigned int xfer_mask; int i, rc; @@ -1331,7 +1326,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, ap->device[i].cdb_len); /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(ap, dev)) { + if (ata_dev_knobble(dev)) { if (print_info) printk(KERN_INFO "ata%u(%u): applying bridge limits\n", ap->id, dev->devno); @@ -1416,11 +1411,11 @@ static int ata_bus_probe(struct ata_port *ap) if (!ata_dev_enabled(dev)) continue; - rc = ata_dev_read_id(ap, dev, &dev->class, 1, dev->id); + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); if (rc) goto fail; - rc = ata_dev_configure(ap, dev, 1); + rc = ata_dev_configure(dev, 1); if (rc) goto fail; } @@ -1453,13 +1448,13 @@ static int ata_bus_probe(struct ata_port *ap) default: tries[dev->devno]--; if (down_xfermask && - ata_down_xfermask_limit(ap, dev, tries[dev->devno] == 1)) + ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) tries[dev->devno] = 0; } if (!tries[dev->devno]) { - ata_down_xfermask_limit(ap, dev, 1); - ata_dev_disable(ap, dev); + ata_down_xfermask_limit(dev, 1); + ata_dev_disable(dev); } goto retry; @@ -1586,15 +1581,15 @@ void sata_phy_reset(struct ata_port *ap) /** * ata_dev_pair - return other device on cable - * @ap: port * @adev: device * * Obtain the other device on the same cable, or if none is * present NULL is returned */ -struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev) +struct ata_device *ata_dev_pair(struct ata_device *adev) { + struct ata_port *ap = adev->ap; struct ata_device *pair = &ap->device[1 - adev->devno]; if (!ata_dev_enabled(pair)) return NULL; @@ -1886,7 +1881,6 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, /** * ata_down_xfermask_limit - adjust dev xfer masks downward - * @ap: Port associated with device @dev * @dev: Device to adjust xfer masks * @force_pio0: Force PIO0 * @@ -1900,9 +1894,9 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * RETURNS: * 0 on success, negative errno on failure */ -int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, - int force_pio0) +int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) { + struct ata_port *ap = dev->ap; unsigned long xfer_mask; int highbit; @@ -1934,8 +1928,9 @@ int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, return -EINVAL; } -static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) +static int ata_dev_set_mode(struct ata_device *dev) { + struct ata_port *ap = dev->ap; unsigned int err_mask; int rc; @@ -1943,7 +1938,7 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) if (dev->xfer_shift == ATA_SHIFT_PIO) dev->flags |= ATA_DFLAG_PIO; - err_mask = ata_dev_set_xfermode(ap, dev); + err_mask = ata_dev_set_xfermode(dev); if (err_mask) { printk(KERN_ERR "ata%u: failed to set xfermode (err_mask=0x%x)\n", @@ -1951,7 +1946,7 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) return -EIO; } - rc = ata_dev_revalidate(ap, dev, 0); + rc = ata_dev_revalidate(dev, 0); if (rc) return rc; @@ -2007,7 +2002,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) if (!ata_dev_enabled(dev)) continue; - ata_dev_xfermask(ap, dev); + ata_dev_xfermask(dev); pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); @@ -2060,7 +2055,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) if (!ata_dev_enabled(dev)) continue; - rc = ata_dev_set_mode(ap, dev); + rc = ata_dev_set_mode(dev); if (rc) goto out; } @@ -2712,7 +2707,6 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, /** * ata_dev_same_device - Determine whether new ID matches configured device - * @ap: port on which the device to compare against resides * @dev: device to compare against * @new_class: class of the new device * @new_id: IDENTIFY page of the new device @@ -2727,9 +2721,10 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, * RETURNS: * 1 if @dev matches @new_class and @new_id, 0 otherwise. */ -static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, - unsigned int new_class, const u16 *new_id) +static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, + const u16 *new_id) { + struct ata_port *ap = dev->ap; const u16 *old_id = dev->id; unsigned char model[2][41], serial[2][21]; u64 new_n_sectors; @@ -2774,7 +2769,6 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, /** * ata_dev_revalidate - Revalidate ATA device - * @ap: port on which the device to revalidate resides * @dev: device to revalidate * @post_reset: is this revalidation after reset? * @@ -2787,9 +2781,9 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, * RETURNS: * 0 on success, negative errno otherwise */ -int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, - int post_reset) +int ata_dev_revalidate(struct ata_device *dev, int post_reset) { + struct ata_port *ap = dev->ap; unsigned int class = dev->class; u16 *id = (void *)ap->sector_buf; int rc; @@ -2800,12 +2794,12 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, } /* read ID data */ - rc = ata_dev_read_id(ap, dev, &class, post_reset, id); + rc = ata_dev_read_id(dev, &class, post_reset, id); if (rc) goto fail; /* is the device still there? */ - if (!ata_dev_same_device(ap, dev, class, id)) { + if (!ata_dev_same_device(dev, class, id)) { rc = -ENODEV; goto fail; } @@ -2813,7 +2807,7 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); /* configure device according to the new ID */ - rc = ata_dev_configure(ap, dev, 0); + rc = ata_dev_configure(dev, 0); if (rc == 0) return 0; @@ -2895,7 +2889,6 @@ static int ata_dma_blacklisted(const struct ata_device *dev) /** * ata_dev_xfermask - Compute supported xfermask of the given device - * @ap: Port on which the device to compute xfermask for resides * @dev: Device to compute xfermask for * * Compute supported xfermask of @dev and store it in @@ -2910,8 +2903,9 @@ static int ata_dma_blacklisted(const struct ata_device *dev) * LOCKING: * None. */ -static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) +static void ata_dev_xfermask(struct ata_device *dev) { + struct ata_port *ap = dev->ap; struct ata_host_set *hs = ap->host_set; unsigned long xfer_mask; int i; @@ -2964,7 +2958,6 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) /** * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command - * @ap: Port associated with device @dev * @dev: Device to which command will be sent * * Issue SET FEATURES - XFER MODE command to device @dev @@ -2977,8 +2970,7 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_dev_set_xfermode(struct ata_port *ap, - struct ata_device *dev) +static unsigned int ata_dev_set_xfermode(struct ata_device *dev) { struct ata_taskfile tf; unsigned int err_mask; @@ -2986,14 +2978,14 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, /* set up set-features taskfile */ DPRINTK("set features - xfer mode\n"); - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); tf.command = ATA_CMD_SET_FEATURES; tf.feature = SETFEATURES_XFER; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; tf.nsect = dev->xfer_mode; - err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -3001,8 +2993,9 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, /** * ata_dev_init_params - Issue INIT DEV PARAMS command - * @ap: Port associated with device @dev * @dev: Device to which command will be sent + * @heads: Number of heads + * @sectors: Number of sectors * * LOCKING: * Kernel thread context (may sleep) @@ -3010,11 +3003,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ - -static unsigned int ata_dev_init_params(struct ata_port *ap, - struct ata_device *dev, - u16 heads, - u16 sectors) +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors) { struct ata_taskfile tf; unsigned int err_mask; @@ -3026,14 +3016,14 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, /* set up init dev params taskfile */ DPRINTK("init dev params \n"); - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); tf.command = ATA_CMD_INIT_DEV_PARAMS; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -4045,16 +4035,15 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) /** * ata_qc_new_init - Request an available ATA command, and initialize it - * @ap: Port associated with device @dev * @dev: Device from whom we request an available command structure * * LOCKING: * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, - struct ata_device *dev) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) { + struct ata_port *ap = dev->ap; struct ata_queued_cmd *qc; qc = ata_qc_new(ap); @@ -4520,19 +4509,18 @@ int ata_port_offline(struct ata_port *ap) * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, * without filling any other registers */ -static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev, - u8 cmd) +static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) { struct ata_taskfile tf; int err; - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); tf.command = cmd; tf.flags |= ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - err = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0); + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); if (err) printk(KERN_ERR "%s: ata command failed: %d\n", __FUNCTION__, err); @@ -4540,7 +4528,7 @@ static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev, return err; } -static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev) +static int ata_flush_cache(struct ata_device *dev) { u8 cmd; @@ -4552,22 +4540,21 @@ static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev) else cmd = ATA_CMD_FLUSH; - return ata_do_simple_cmd(ap, dev, cmd); + return ata_do_simple_cmd(dev, cmd); } -static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev) +static int ata_standby_drive(struct ata_device *dev) { - return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1); + return ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); } -static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) +static int ata_start_drive(struct ata_device *dev) { - return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE); + return ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE); } /** * ata_device_resume - wakeup a previously suspended devices - * @ap: port the device is connected to * @dev: the device to resume * * Kick the drive back into action, by sending it an idle immediate @@ -4575,39 +4562,42 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) * and host. * */ -int ata_device_resume(struct ata_port *ap, struct ata_device *dev) +int ata_device_resume(struct ata_device *dev) { + struct ata_port *ap = dev->ap; + if (ap->flags & ATA_FLAG_SUSPENDED) { struct ata_device *failed_dev; ap->flags &= ~ATA_FLAG_SUSPENDED; while (ata_set_mode(ap, &failed_dev)) - ata_dev_disable(ap, failed_dev); + ata_dev_disable(failed_dev); } if (!ata_dev_enabled(dev)) return 0; if (dev->class == ATA_DEV_ATA) - ata_start_drive(ap, dev); + ata_start_drive(dev); return 0; } /** * ata_device_suspend - prepare a device for suspend - * @ap: port the device is connected to * @dev: the device to suspend * * Flush the cache on the drive, if appropriate, then issue a * standbynow command. */ -int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state) +int ata_device_suspend(struct ata_device *dev, pm_message_t state) { + struct ata_port *ap = dev->ap; + if (!ata_dev_enabled(dev)) return 0; if (dev->class == ATA_DEV_ATA) - ata_flush_cache(ap, dev); + ata_flush_cache(dev); if (state.event != PM_EVENT_FREEZE) - ata_standby_drive(ap, dev); + ata_standby_drive(dev); ap->flags |= ATA_FLAG_SUSPENDED; return 0; } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ce90b6352a81..fcbf64e741bb 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -302,7 +302,6 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) /** * ata_scsi_qc_new - acquire new ata_queued_cmd reference - * @ap: ATA port to which the new command is attached * @dev: ATA device to which the new command is attached * @cmd: SCSI command that originated this ATA command * @done: SCSI command completion function @@ -321,14 +320,13 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) * RETURNS: * Command allocated, or %NULL if none available. */ -struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, - struct ata_device *dev, +struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_queued_cmd *qc; - qc = ata_qc_new_init(ap, dev); + qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -398,7 +396,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev) struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = &ap->device[sdev->id]; - return ata_device_resume(ap, dev); + return ata_device_resume(dev); } int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) @@ -406,7 +404,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = &ap->device[sdev->id]; - return ata_device_suspend(ap, dev, state); + return ata_device_suspend(dev, state); } /** @@ -1224,7 +1222,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) /** * ata_scsi_translate - Translate then issue SCSI command to ATA device - * @ap: ATA port to which the command is addressed * @dev: ATA device to which the command is addressed * @cmd: SCSI command to execute * @done: SCSI command completion function @@ -1247,17 +1244,16 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ -static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - ata_xlat_func_t xlat_func) +static void ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; u8 *scsicmd = cmd->cmnd; VPRINTK("ENTER\n"); - qc = ata_scsi_qc_new(ap, dev, cmd, done); + qc = ata_scsi_qc_new(dev, cmd, done); if (!qc) goto err_mem; @@ -1266,7 +1262,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", - ap->id, dev->devno); + dev->ap->id, dev->devno); goto err_did; } @@ -2433,19 +2429,20 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap, struct ata_device *dev) +static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + struct ata_device *dev) { if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, cmd->cmnd[0]); if (xlat_func) - ata_scsi_translate(ap, dev, cmd, done, xlat_func); + ata_scsi_translate(dev, cmd, done, xlat_func); else - ata_scsi_simulate(ap, dev, cmd, done); + ata_scsi_simulate(dev, cmd, done); } else - ata_scsi_translate(ap, dev, cmd, done, atapi_xlat); + ata_scsi_translate(dev, cmd, done, atapi_xlat); } /** @@ -2483,7 +2480,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) dev = ata_scsi_find_dev(ap, scsidev); if (likely(dev)) - __ata_scsi_queuecmd(cmd, done, ap, dev); + __ata_scsi_queuecmd(cmd, done, dev); else { cmd->result = (DID_BAD_TARGET << 16); done(cmd); @@ -2496,7 +2493,6 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) /** * ata_scsi_simulate - simulate SCSI command on ATA device - * @ap: port the device is connected to * @dev: the target device * @cmd: SCSI command being sent to device. * @done: SCSI command completion function. @@ -2508,14 +2504,12 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) * spin_lock_irqsave(host_set lock) */ -void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; const u8 *scsicmd = cmd->cmnd; - args.ap = ap; args.dev = dev; args.id = dev->id; args.cmd = cmd; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 6442c2f1a80c..c9ff83bbcfae 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -32,7 +32,6 @@ #define DRV_VERSION "1.30" /* must be exactly four chars */ struct ata_scsi_args { - struct ata_port *ap; struct ata_device *dev; u16 *id; struct scsi_cmnd *cmd; @@ -43,18 +42,16 @@ struct ata_scsi_args { extern int atapi_enabled; extern int atapi_dmadir; extern int libata_fua; -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, - struct ata_device *dev); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); -extern void ata_dev_disable(struct ata_port *ap, struct ata_device *dev); +extern void ata_dev_disable(struct ata_device *dev); extern void ata_port_flush_task(struct ata_port *ap); -extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, +extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen); extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); -extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, - int force_pio0); +extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); extern int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, unsigned int *classes); diff --git a/include/linux/libata.h b/include/linux/libata.h index ac2d2cc78b10..8154b366bbd1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -518,8 +518,7 @@ extern void ata_std_probeinit(struct ata_port *ap); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); -extern int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, - int post_reset); +extern int ata_dev_revalidate(struct ata_device *dev, int post_reset); extern void ata_port_disable(struct ata_port *); extern void ata_std_ports(struct ata_ioports *ioaddr); #ifdef CONFIG_PCI @@ -545,8 +544,8 @@ extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); -extern int ata_device_resume(struct ata_port *, struct ata_device *); -extern int ata_device_suspend(struct ata_port *, struct ata_device *, pm_message_t state); +extern int ata_device_resume(struct ata_device *); +extern int ata_device_suspend(struct ata_device *, pm_message_t state); extern int ata_ratelimit(void); extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, @@ -592,15 +591,13 @@ extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); -extern struct ata_device *ata_dev_pair(struct ata_port *ap, - struct ata_device *adev); +extern struct ata_device *ata_dev_pair(struct ata_device *adev); /* * Timing helpers @@ -812,12 +809,12 @@ static inline struct ata_queued_cmd *ata_qc_from_tag (struct ata_port *ap, return NULL; } -static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, unsigned int device) +static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) { memset(tf, 0, sizeof(*tf)); - tf->ctl = ap->ctl; - if (device == 0) + tf->ctl = dev->ap->ctl; + if (dev->devno == 0) tf->device = ATA_DEVICE_OBS; else tf->device = ATA_DEVICE_OBS | ATA_DEV1; @@ -832,7 +829,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->nbytes = qc->curbytes = 0; qc->err_mask = 0; - ata_tf_init(qc->ap, &qc->tf, qc->dev->devno); + ata_tf_init(qc->dev, &qc->tf); /* init result_tf such that it indicates normal completion */ qc->result_tf.command = ATA_DRDY; From 61440db61fe4945ad9f7b32b4d6a22b17174aa1f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:55 +0900 Subject: [PATCH 136/258] [PATCH] libata: implement ATA printk helpers Implement ata_{port|dev}_printk() which prefixes the message with proper identification string. This change is necessary for later PM support because devices and links should be identified differently depending on how they are attached. This also helps unifying device id strings. Currently, there are two forms in use (P is the port number D device number) - 'ataP(D):', and 'ataP: dev D '. These macros also make it harder to forget proper ID string (e.g. printing only port number when a device is in question). Debug message handling can be integrated into these printk macros by passing debug type and level via @lv. Signed-off-by: Tejun Heo --- include/linux/libata.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/linux/libata.h b/include/linux/libata.h index 8154b366bbd1..91e10e6b7565 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -650,7 +650,18 @@ extern void ata_eng_timeout(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); +/* + * printk helpers + */ +#define ata_port_printk(ap, lv, fmt, args...) \ + printk(lv"ata%u: "fmt, (ap)->id , ##args) +#define ata_dev_printk(dev, lv, fmt, args...) \ + printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args) + +/* + * qc helpers + */ static inline int ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc) { From f15a1dafed22d5037e0feea7528e1eeb28a1a7a3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:56 +0900 Subject: [PATCH 137/258] [PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 8 +- drivers/scsi/ata_piix.c | 4 +- drivers/scsi/libata-core.c | 199 +++++++++++++++++------------------- drivers/scsi/libata-eh.c | 5 +- drivers/scsi/libata-scsi.c | 9 +- drivers/scsi/sata_mv.c | 8 +- drivers/scsi/sata_promise.c | 7 +- drivers/scsi/sata_sil.c | 8 +- drivers/scsi/sata_sil24.c | 6 +- drivers/scsi/sata_sx4.c | 7 +- 10 files changed, 124 insertions(+), 137 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index f6e4c8ea74e3..a4fb8d0a6c08 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -655,8 +655,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) fail_restart: ahci_start_engine(ap); fail: - printk(KERN_ERR "ata%u: softreset failed (%s)\n", - ap->id, reason); + ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); return rc; } @@ -798,9 +797,8 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) if ((ap->device[0].class != ATA_DEV_ATAPI) || ((irq_stat & PORT_IRQ_TF_ERR) == 0)) - printk(KERN_WARNING "ata%u: port reset, " + ata_port_printk(ap, KERN_WARNING, "port reset, " "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", - ap->id, irq_stat, readl(mmio + HOST_IRQ_STAT), readl(port_mmio + PORT_IRQ_STAT), @@ -840,7 +838,7 @@ static void ahci_eng_timeout(struct ata_port *ap) struct ata_queued_cmd *qc; unsigned long flags; - printk(KERN_WARNING "ata%u: handling error/timeout\n", ap->id); + ata_port_printk(ap, KERN_WARNING, "handling error/timeout\n"); spin_lock_irqsave(&host_set->lock, flags); diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 62dabf74188e..af1d46e36107 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -484,7 +484,7 @@ static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); return 0; } @@ -565,7 +565,7 @@ static unsigned int piix_sata_probe (struct ata_port *ap) static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) { if (!piix_sata_probe(ap)) { - printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); return 0; } diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4ced962db812..9a97ebd59209 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -412,8 +412,7 @@ static const char *sata_spd_string(unsigned int spd) void ata_dev_disable(struct ata_device *dev) { if (ata_dev_enabled(dev)) { - printk(KERN_WARNING "ata%u: dev %u disabled\n", - dev->ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); dev->class++; } } @@ -1021,8 +1020,9 @@ unsigned ata_exec_internal(struct ata_device *dev, if (qc->flags & ATA_QCFLAG_ACTIVE) { qc->err_mask = AC_ERR_TIMEOUT; ata_qc_complete(qc); - printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", - ap->id, command); + + ata_dev_printk(dev, KERN_WARNING, + "qc timeout (cmd 0x%x)\n", command); } spin_unlock_irqrestore(&ap->host_set->lock, flags); @@ -1187,8 +1187,8 @@ static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, return 0; err_out: - printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", - ap->id, dev->devno, reason); + ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " + "(%s, err_mask=0x%x)\n", reason, err_mask); return rc; } @@ -1228,10 +1228,10 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) /* print device capabilities */ if (print_info) - printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x " - "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - ap->id, dev->devno, id[49], id[82], id[83], - id[84], id[85], id[86], id[87], id[88]); + ata_dev_printk(dev, KERN_DEBUG, "cfg 49:%04x 82:%04x 83:%04x " + "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", + id[49], id[82], id[83], id[84], + id[85], id[86], id[87], id[88]); /* initialize to-be-configured parameters */ dev->flags &= ~ATA_DFLAG_CFG_MASK; @@ -1267,13 +1267,12 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (print_info) - printk(KERN_INFO "ata%u: dev %u ATA-%d, " - "max %s, %Lu sectors: %s\n", - ap->id, dev->devno, - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - lba_desc); + ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + "max %s, %Lu sectors: %s\n", + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + lba_desc); } else { /* CHS */ @@ -1291,13 +1290,12 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (print_info) - printk(KERN_INFO "ata%u: dev %u ATA-%d, " - "max %s, %Lu sectors: CHS %u/%u/%u\n", - ap->id, dev->devno, - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - dev->cylinders, dev->heads, dev->sectors); + ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, dev->sectors); } dev->cdb_len = 16; @@ -1307,7 +1305,8 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) else if (dev->class == ATA_DEV_ATAPI) { rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { - printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); + ata_dev_printk(dev, KERN_WARNING, + "unsupported CDB len\n"); rc = -EINVAL; goto err_out_nosup; } @@ -1315,8 +1314,8 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (print_info) - printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, dev->devno, ata_mode_string(xfer_mask)); + ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s\n", + ata_mode_string(xfer_mask)); } ap->host->max_cmd_len = 0; @@ -1328,8 +1327,8 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { if (print_info) - printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_INFO, + "applying bridge limits\n"); dev->udma_mask &= ATA_UDMA5; dev->max_sectors = ATA_MAX_SECTORS; } @@ -1382,7 +1381,8 @@ static int ata_bus_probe(struct ata_port *ap) if (ap->ops->probe_reset) { rc = ap->ops->probe_reset(ap, classes); if (rc) { - printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); + ata_port_printk(ap, KERN_ERR, + "reset failed (errno=%d)\n", rc); return rc; } } else { @@ -1495,13 +1495,13 @@ static void sata_print_link_status(struct ata_port *ap) if (ata_port_online(ap)) { tmp = (sstatus >> 4) & 0xf; - printk(KERN_INFO - "ata%u: SATA link up %s (SStatus %X SControl %X)\n", - ap->id, sata_spd_string(tmp), sstatus, scontrol); + ata_port_printk(ap, KERN_INFO, + "SATA link up %s (SStatus %X SControl %X)\n", + sata_spd_string(tmp), sstatus, scontrol); } else { - printk(KERN_INFO - "ata%u: SATA link down (SStatus %X SControl %X)\n", - ap->id, sstatus, scontrol); + ata_port_printk(ap, KERN_INFO, + "SATA link down (SStatus %X SControl %X)\n", + sstatus, scontrol); } } @@ -1655,8 +1655,8 @@ int sata_down_spd_limit(struct ata_port *ap) ap->sata_spd_limit = mask; - printk(KERN_WARNING "ata%u: limiting SATA link speed to %s\n", - ap->id, sata_spd_string(fls(mask))); + ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", + sata_spd_string(fls(mask))); return 0; } @@ -1896,7 +1896,6 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, */ int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) { - struct ata_port *ap = dev->ap; unsigned long xfer_mask; int highbit; @@ -1919,8 +1918,8 @@ int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, &dev->udma_mask); - printk(KERN_WARNING "ata%u: dev %u limiting speed to %s\n", - ap->id, dev->devno, ata_mode_string(xfer_mask)); + ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", + ata_mode_string(xfer_mask)); return 0; @@ -1930,7 +1929,6 @@ int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) static int ata_dev_set_mode(struct ata_device *dev) { - struct ata_port *ap = dev->ap; unsigned int err_mask; int rc; @@ -1940,9 +1938,8 @@ static int ata_dev_set_mode(struct ata_device *dev) err_mask = ata_dev_set_xfermode(dev); if (err_mask) { - printk(KERN_ERR - "ata%u: failed to set xfermode (err_mask=0x%x)\n", - ap->id, err_mask); + ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " + "(err_mask=0x%x)\n", err_mask); return -EIO; } @@ -1953,9 +1950,8 @@ static int ata_dev_set_mode(struct ata_device *dev) DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", dev->xfer_shift, (int)dev->xfer_mode); - printk(KERN_INFO "ata%u: dev %u configured for %s\n", - ap->id, dev->devno, - ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); return 0; } @@ -2023,8 +2019,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) continue; if (!dev->pio_mode) { - printk(KERN_WARNING "ata%u: dev %u no PIO support\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); rc = -EINVAL; goto out; } @@ -2123,8 +2118,8 @@ unsigned int ata_busy_sleep (struct ata_port *ap, } if (status & ATA_BUSY) - printk(KERN_WARNING "ata%u is slow to respond, " - "please be patient\n", ap->id); + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient\n"); timeout = timer_start + tmout; while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { @@ -2133,8 +2128,8 @@ unsigned int ata_busy_sleep (struct ata_port *ap, } if (status & ATA_BUSY) { - printk(KERN_ERR "ata%u failed to respond (%lu secs)\n", - ap->id, tmout / HZ); + ata_port_printk(ap, KERN_ERR, "port failed to respond " + "(%lu secs)\n", tmout / HZ); return 1; } @@ -2227,7 +2222,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * pulldown resistor. */ if (ata_check_status(ap) == 0xFF) { - printk(KERN_ERR "ata%u: SRST failed (status 0xFF)\n", ap->id); + ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); return AC_ERR_OTHER; } @@ -2321,7 +2316,7 @@ void ata_bus_reset(struct ata_port *ap) return; err_out: - printk(KERN_ERR "ata%u: disabling port\n", ap->id); + ata_port_printk(ap, KERN_ERR, "disabling port\n"); ap->ops->port_disable(ap); DPRINTK("EXIT\n"); @@ -2424,8 +2419,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) DPRINTK("about to softreset, devmask=%x\n", devmask); err_mask = ata_bus_softreset(ap, devmask); if (err_mask) { - printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", - ap->id, err_mask); + ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", + err_mask); return -EIO; } @@ -2503,8 +2498,8 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) } if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - printk(KERN_ERR - "ata%u: COMRESET failed (device not ready)\n", ap->id); + ata_port_printk(ap, KERN_ERR, + "COMRESET failed (device not ready)\n"); return -EIO; } @@ -2662,8 +2657,8 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, rc = ata_do_reset(ap, softreset, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; - printk(KERN_INFO "ata%u: softreset failed, will try " - "hardreset in 5 secs\n", ap->id); + ata_port_printk(ap, KERN_INFO, "softreset failed, " + "will try hardreset in 5 secs\n"); ssleep(5); } @@ -2681,15 +2676,15 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (sata_down_spd_limit(ap)) goto done; - printk(KERN_INFO "ata%u: hardreset failed, will retry " - "in 5 secs\n", ap->id); + ata_port_printk(ap, KERN_INFO, "hardreset failed, " + "will retry in 5 secs\n"); ssleep(5); } if (softreset) { - printk(KERN_INFO "ata%u: hardreset succeeded without " - "classification, will retry softreset in 5 secs\n", - ap->id); + ata_port_printk(ap, KERN_INFO, + "hardreset succeeded without classification, " + "will retry softreset in 5 secs\n"); ssleep(5); rc = ata_do_reset(ap, softreset, classes); @@ -2724,15 +2719,13 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, const u16 *new_id) { - struct ata_port *ap = dev->ap; const u16 *old_id = dev->id; unsigned char model[2][41], serial[2][21]; u64 new_n_sectors; if (dev->class != new_class) { - printk(KERN_INFO - "ata%u: dev %u class mismatch %d != %d\n", - ap->id, dev->devno, dev->class, new_class); + ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", + dev->class, new_class); return 0; } @@ -2743,24 +2736,22 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, new_n_sectors = ata_id_n_sectors(new_id); if (strcmp(model[0], model[1])) { - printk(KERN_INFO - "ata%u: dev %u model number mismatch '%s' != '%s'\n", - ap->id, dev->devno, model[0], model[1]); + ata_dev_printk(dev, KERN_INFO, "model number mismatch " + "'%s' != '%s'\n", model[0], model[1]); return 0; } if (strcmp(serial[0], serial[1])) { - printk(KERN_INFO - "ata%u: dev %u serial number mismatch '%s' != '%s'\n", - ap->id, dev->devno, serial[0], serial[1]); + ata_dev_printk(dev, KERN_INFO, "serial number mismatch " + "'%s' != '%s'\n", serial[0], serial[1]); return 0; } if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { - printk(KERN_INFO - "ata%u: dev %u n_sectors mismatch %llu != %llu\n", - ap->id, dev->devno, (unsigned long long)dev->n_sectors, - (unsigned long long)new_n_sectors); + ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " + "%llu != %llu\n", + (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); return 0; } @@ -2783,9 +2774,8 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, */ int ata_dev_revalidate(struct ata_device *dev, int post_reset) { - struct ata_port *ap = dev->ap; unsigned int class = dev->class; - u16 *id = (void *)ap->sector_buf; + u16 *id = (void *)dev->ap->sector_buf; int rc; if (!ata_dev_enabled(dev)) { @@ -2812,8 +2802,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset) return 0; fail: - printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", - ap->id, dev->devno, rc); + ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); return rc; } @@ -2941,8 +2930,8 @@ static void ata_dev_xfermask(struct ata_device *dev) } if (ata_dma_blacklisted(dev)) - printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, " - "disabling DMA\n", ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, + "device is on DMA blacklist, disabling DMA\n"); if (hs->flags & ATA_HOST_SIMPLEX) { if (hs->simplex_claimed) @@ -3733,8 +3722,8 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned int i; if (words) /* warning if bytes > 1 */ - printk(KERN_WARNING "ata%u: %u bytes trailing data\n", - ap->id, bytes); + ata_dev_printk(qc->dev, KERN_WARNING, + "%u bytes trailing data\n", bytes); for (i = 0; i < words; i++) ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); @@ -3817,8 +3806,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) return; err_out: - printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } @@ -3887,8 +3875,7 @@ static void ata_pio_error(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_WARNING "ata%u: dev %u PIO error\n", - ap->id, qc->dev->devno); + ata_dev_printk(qc->dev, KERN_WARNING, "PIO error\n"); /* make sure qc->err_mask is available to * know what's wrong and recover @@ -4314,7 +4301,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, #ifdef ATA_IRQ_TRAP if ((ap->stats.idle_irq % 1000) == 0) { ata_irq_ack(ap, 0); /* debug trap */ - printk(KERN_WARNING "ata%d: irq trap\n", ap->id); + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); return 1; } #endif @@ -4522,8 +4509,8 @@ static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); if (err) - printk(KERN_ERR "%s: ata command failed: %d\n", - __FUNCTION__, err); + ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n", + __FUNCTION__, err); return err; } @@ -4863,15 +4850,14 @@ int ata_device_add(const struct ata_probe_ent *ent) (ap->pio_mask << ATA_SHIFT_PIO); /* print per-port info to dmesg */ - printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX " - "bmdma 0x%lX irq %lu\n", - ap->id, - ap->flags & ATA_FLAG_SATA ? 'S' : 'P', - ata_mode_string(xfer_mode_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - ent->irq); + ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " + "ctl 0x%lX bmdma 0x%lX irq %lu\n", + ap->flags & ATA_FLAG_SATA ? 'S' : 'P', + ata_mode_string(xfer_mode_mask), + ap->ioaddr.cmd_addr, + ap->ioaddr.ctl_addr, + ap->ioaddr.bmdma_addr, + ent->irq); ata_chk_status(ap); host_set->ops->irq_clear(ap); @@ -4909,8 +4895,7 @@ int ata_device_add(const struct ata_probe_ent *ent) rc = scsi_add_host(ap->host, dev); if (rc) { - printk(KERN_ERR "ata%u: scsi_add_host failed\n", - ap->id); + ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); /* FIXME: do something useful here */ /* FIXME: handle unconditional calls to * scsi_scan_host and ata_host_remove, below, diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index c31b13fd5307..959a1cdffac2 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -167,8 +167,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) /* ack bmdma irq events */ ap->ops->irq_clear(ap); - printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", - ap->id, qc->tf.command, drv_stat, host_stat); + ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " + "stat 0x%x host_stat 0x%x\n", + qc->tf.command, drv_stat, host_stat); /* complete taskfile transaction */ qc->err_mask |= ac_err_mask(drv_stat); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index fcbf64e741bb..a9b4083a4f67 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1261,8 +1261,8 @@ static void ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, if (cmd->sc_data_direction == DMA_FROM_DEVICE || cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { - printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", - dev->ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, + "WARNING: zero len r/w req\n"); goto err_did; } @@ -2200,8 +2200,9 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) { if (unlikely(dev->class == ATA_DEV_ATAPI)) { - printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n", - ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled"); + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" : "disabled"); return NULL; } } diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 748569b615fc..e8d00f0efdf2 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -680,7 +680,7 @@ static void mv_stop_dma(struct ata_port *ap) } if (EDMA_EN & reg) { - printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); /* FIXME: Consider doing a reset here to recover */ } } @@ -1964,8 +1964,8 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) ata_port_probe(ap); } else { sata_scr_read(ap, SCR_STATUS, &sstatus); - printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", - ap->id, sstatus); + ata_port_printk(ap, KERN_INFO, + "no device found (phy stat %08x)\n", sstatus); ata_port_disable(ap); return; } @@ -2023,7 +2023,7 @@ static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; - printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); DPRINTK("All regs @ start of eng_timeout\n"); mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, to_pci_dev(ap->host_set->dev)); diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index ddbc0c6dd9fe..e9d61bc2b247 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -435,7 +435,7 @@ static void pdc_eng_timeout(struct ata_port *ap) switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - printk(KERN_ERR "ata%u: command timeout\n", ap->id); + ata_port_printk(ap, KERN_ERR, "command timeout\n"); drv_stat = ata_wait_idle(ap); qc->err_mask |= __ac_err_mask(drv_stat); break; @@ -443,8 +443,9 @@ static void pdc_eng_timeout(struct ata_port *ap) default: drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n", - ap->id, qc->tf.command, drv_stat); + ata_port_printk(ap, KERN_ERR, + "unknown timeout, cmd 0x%x stat 0x%x\n", + qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); break; diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index c9333577330e..bfcece18a7cb 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -360,16 +360,16 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) if (slow_down || ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE))) { - printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " + "(mod15write workaround)\n"); dev->max_sectors = 15; return; } /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { - printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", - ap->id, dev->devno, model_num); + ata_dev_printk(dev, KERN_INFO, + "applying Maxtor errata fix %s\n", model_num); dev->udma_mask &= ATA_UDMA5; return; } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index bedc787dafd1..ff96724b1e38 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -516,7 +516,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) return 0; err: - printk(KERN_ERR "ata%u: softreset failed (%s)\n", ap->id, reason); + ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); return -EIO; } @@ -561,7 +561,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) return 0; err: - printk(KERN_ERR "ata%u: hardreset failed (%s)\n", ap->id, reason); + ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); return -EIO; } @@ -721,7 +721,7 @@ static void sil24_eng_timeout(struct ata_port *ap) qc = ata_qc_from_tag(ap, ap->active_tag); - printk(KERN_ERR "ata%u: command timeout\n", ap->id); + ata_port_printk(ap, KERN_ERR, "command timeout\n"); qc->err_mask |= AC_ERR_TIMEOUT; ata_eh_qc_complete(qc); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index a669d0589889..96d7b73f5fdc 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -868,15 +868,16 @@ static void pdc_eng_timeout(struct ata_port *ap) switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - printk(KERN_ERR "ata%u: command timeout\n", ap->id); + ata_port_printk(ap, KERN_ERR, "command timeout\n"); qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); break; default: drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n", - ap->id, qc->tf.command, drv_stat); + ata_port_printk(ap, KERN_ERR, + "unknown timeout, cmd 0x%x stat 0x%x\n", + qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); break; From 9ec957f2002bd2994be659bbc0ec28397fa251ee Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:57:58 +0900 Subject: [PATCH 138/258] [PATCH] libata-eh-fw: add flags and operations for new EH Add ATA_FLAG_EH_{PENDING|FROZEN}, ATA_ATA_QCFLAG_{FAILED|SENSE_VALID} and ops->freeze, thaw, error_handler, post_internal_cmd() for new EH. Signed-off-by: Tejun Heo --- include/linux/libata.h | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 91e10e6b7565..e5d6d7f8e6dc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -146,13 +146,16 @@ enum { ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */ ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */ - ATA_FLAG_NOINTR = (1 << 16), /* FIXME: Remove this once + ATA_FLAG_NOINTR = (1 << 13), /* FIXME: Remove this once * proper HSM is in place. */ - ATA_FLAG_DEBUGMSG = (1 << 17), - ATA_FLAG_FLUSH_PORT_TASK = (1 << 18), /* flush port task */ + ATA_FLAG_DEBUGMSG = (1 << 14), + ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* flush port task */ - ATA_FLAG_DISABLED = (1 << 19), /* port is disabled, ignore it */ - ATA_FLAG_SUSPENDED = (1 << 20), /* port is suspended */ + ATA_FLAG_EH_PENDING = (1 << 16), /* EH pending */ + ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ + + ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ + ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ /* bits 24:31 of ap->flags are reserved for LLDD specific flags */ @@ -164,7 +167,9 @@ enum { ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ - ATA_QCFLAG_EH_SCHEDULED = (1 << 16), /* EH scheduled */ + ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */ + ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ + ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */ @@ -463,7 +468,15 @@ struct ata_port_operations { void (*qc_prep) (struct ata_queued_cmd *qc); unsigned int (*qc_issue) (struct ata_queued_cmd *qc); - void (*eng_timeout) (struct ata_port *ap); + /* Error handlers. ->error_handler overrides ->eng_timeout and + * indicates that new-style EH is in place. + */ + void (*eng_timeout) (struct ata_port *ap); /* obsolete */ + + void (*freeze) (struct ata_port *ap); + void (*thaw) (struct ata_port *ap); + void (*error_handler) (struct ata_port *ap); + void (*post_internal_cmd) (struct ata_queued_cmd *qc); irqreturn_t (*irq_handler)(int, void *, struct pt_regs *); void (*irq_clear) (struct ata_port *); From dc2b3515868a254b3d653d77844bff93c5d4c095 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:00 +0900 Subject: [PATCH 139/258] [PATCH] libata-eh-fw: clear SError in ata_std_postreset() Clear SError in ata_std_postreset(). This is to clear SError bits which get set during reset. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9a97ebd59209..de2cd61a264d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2528,11 +2528,17 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) */ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) { + u32 serror; + DPRINTK("ENTER\n"); /* print link status */ sata_print_link_status(ap); + /* clear SError */ + if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) + sata_scr_write(ap, SCR_ERROR, serror); + /* re-enable interrupts */ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ ata_irq_on(ap); From 2ab7db1ff1d64a2ba389d0692d532f42a15f1f72 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:02 +0900 Subject: [PATCH 140/258] [PATCH] libata-eh-fw: use special reserved tag and qc for internal commands New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 32 +++++++++++++++++++++++++++++--- include/linux/libata.h | 9 ++++++++- 2 files changed, 37 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index de2cd61a264d..966abb5f423e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -980,15 +980,39 @@ unsigned ata_exec_internal(struct ata_device *dev, struct ata_port *ap = dev->ap; u8 command = tf->command; struct ata_queued_cmd *qc; + unsigned int tag, preempted_tag; DECLARE_COMPLETION(wait); unsigned long flags; unsigned int err_mask; spin_lock_irqsave(&ap->host_set->lock, flags); - qc = ata_qc_new_init(dev); - BUG_ON(qc == NULL); + /* initialize internal qc */ + /* XXX: Tag 0 is used for drivers with legacy EH as some + * drivers choke if any other tag is given. This breaks + * ata_tag_internal() test for those drivers. Don't use new + * EH stuff without converting to it. + */ + if (ap->ops->error_handler) + tag = ATA_TAG_INTERNAL; + else + tag = 0; + + if (test_and_set_bit(tag, &ap->qactive)) + BUG(); + qc = ata_qc_from_tag(ap, tag); + + qc->tag = tag; + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + ata_qc_reinit(qc); + + preempted_tag = ap->active_tag; + ap->active_tag = ATA_TAG_POISON; + + /* prepare & issue qc */ qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); @@ -1035,6 +1059,7 @@ unsigned ata_exec_internal(struct ata_device *dev, err_mask = qc->err_mask; ata_qc_free(qc); + ap->active_tag = preempted_tag; /* XXX - Some LLDDs (sata_mv) disable port on command failure. * Until those drivers are fixed, we detect the condition @@ -4014,7 +4039,8 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) struct ata_queued_cmd *qc = NULL; unsigned int i; - for (i = 0; i < ATA_MAX_QUEUE; i++) + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) if (!test_and_set_bit(i, &ap->qactive)) { qc = ata_qc_from_tag(ap, i); break; diff --git a/include/linux/libata.h b/include/linux/libata.h index e5d6d7f8e6dc..5a403e434ff8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -108,7 +108,9 @@ enum { LIBATA_MAX_PRD = ATA_MAX_PRD / 2, ATA_MAX_PORTS = 8, ATA_DEF_QUEUE = 1, - ATA_MAX_QUEUE = 1, + /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ + ATA_MAX_QUEUE = 2, + ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, ATA_MAX_SECTORS = 200, /* FIXME */ ATA_MAX_BUS = 2, ATA_DEF_BUSY_WAIT = 10000, @@ -717,6 +719,11 @@ static inline unsigned int ata_tag_valid(unsigned int tag) return (tag < ATA_MAX_QUEUE) ? 1 : 0; } +static inline unsigned int ata_tag_internal(unsigned int tag) +{ + return tag == ATA_MAX_QUEUE - 1; +} + static inline unsigned int ata_class_enabled(unsigned int class) { return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI; From f69499f42caf74194df678c9c293f2ee0fe90bc3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:03 +0900 Subject: [PATCH 141/258] [PATCH] libata-eh-fw: update ata_qc_from_tag() to enforce normal/EH qc ownership New EH framework has clear distinction about who owns a qc. Every qc starts owned by normal execution path - PIO, interrupt or whatever. When an exception condition occurs which affects the qc, the qc gets scheduled for EH. Note that some events (say, link lost and regained, command timeout) may schedule qc's which are not directly related but could have been affected for EH too. Scheduling for EH is atomic w.r.t. ap->host_set->lock and once schedule for EH, normal execution path is not allowed to access the qc in whatever way. (PIO synchronization acts a bit different and will be dealt with later) This patch make ata_qc_from_tag() check whether a qc is active and owned by normal path before returning it. If conditions don't match, NULL is returned and thus access to the qc is denied. __ata_qc_from_tag() is the original ata_qc_from_tag() and is used by libata core/EH layers to access inactive/failed qc's. This change is applied only if the associated LLDD implements new EH as indicated by non-NULL ->error_handler Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 4 ++-- include/linux/libata.h | 19 +++++++++++++++++-- 2 files changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 966abb5f423e..1c34c1427aa3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1001,7 +1001,7 @@ unsigned ata_exec_internal(struct ata_device *dev, if (test_and_set_bit(tag, &ap->qactive)) BUG(); - qc = ata_qc_from_tag(ap, tag); + qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; qc->scsicmd = NULL; @@ -4042,7 +4042,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) /* the last tag is reserved for internal command. */ for (i = 0; i < ATA_MAX_QUEUE - 1; i++) if (!test_and_set_bit(i, &ap->qactive)) { - qc = ata_qc_from_tag(ap, i); + qc = __ata_qc_from_tag(ap, i); break; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 5a403e434ff8..bfcefdca0616 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -832,14 +832,29 @@ static inline void ata_qc_set_polling(struct ata_queued_cmd *qc) qc->tf.ctl |= ATA_NIEN; } -static inline struct ata_queued_cmd *ata_qc_from_tag (struct ata_port *ap, - unsigned int tag) +static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap, + unsigned int tag) { if (likely(ata_tag_valid(tag))) return &ap->qcmd[tag]; return NULL; } +static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap, + unsigned int tag) +{ + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (unlikely(!qc) || !ap->ops->error_handler) + return qc; + + if ((qc->flags & (ATA_QCFLAG_ACTIVE | + ATA_QCFLAG_FAILED)) == ATA_QCFLAG_ACTIVE) + return qc; + + return NULL; +} + static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) { memset(tf, 0, sizeof(*tf)); From f686bcb8078ac7505ec88818886c2c72639f4fc5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:05 +0900 Subject: [PATCH 142/258] [PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 62 +++++++++++++++++++++++++++++++++++++- drivers/scsi/libata-eh.c | 27 +++++++++++++++++ drivers/scsi/libata.h | 2 ++ include/linux/libata.h | 27 +---------------- 4 files changed, 91 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1c34c1427aa3..1f5c3270992a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4123,6 +4123,66 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) qc->complete_fn(qc); } +/** + * ata_qc_complete - Complete an active ATA command + * @qc: Command to complete + * @err_mask: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* XXX: New EH and old EH use different mechanisms to + * synchronize EH with regular execution path. + * + * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. + * Normal execution path is responsible for not accessing a + * failed qc. libata core enforces the rule by returning NULL + * from ata_qc_from_tag() for failed qcs. + * + * Old EH depends on ata_qc_complete() nullifying completion + * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does + * not synchronize with interrupt handler. Only PIO task is + * taken care of. + */ + if (ap->ops->error_handler) { + WARN_ON(ap->flags & ATA_FLAG_FROZEN); + + if (unlikely(qc->err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + + if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { + if (!ata_tag_internal(qc->tag)) { + /* always fill result TF for failed qc */ + ap->ops->tf_read(ap, &qc->result_tf); + ata_qc_schedule_eh(qc); + return; + } + } + + /* read result TF if requested */ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } else { + if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) + return; + + /* read result TF if failed or requested */ + if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } +} + static inline int ata_should_dma_map(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -5245,7 +5305,7 @@ EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(__ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); EXPORT_SYMBOL_GPL(ata_tf_load); EXPORT_SYMBOL_GPL(ata_tf_read); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 959a1cdffac2..471846fe4b73 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -210,6 +210,33 @@ void ata_eng_timeout(struct ata_port *ap) DPRINTK("EXIT\n"); } +/** + * ata_qc_schedule_eh - schedule qc for error handling + * @qc: command to schedule error handling for + * + * Schedule error handling for @qc. EH will kick in as soon as + * other commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_schedule_eh(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + WARN_ON(!ap->ops->error_handler); + + qc->flags |= ATA_QCFLAG_FAILED; + qc->ap->flags |= ATA_FLAG_EH_PENDING; + + /* The following will fail if timeout has already expired. + * ata_scsi_error() takes care of such scmds on EH entry. + * Note that ATA_QCFLAG_FAILED is unconditionally set after + * this function completes. + */ + scsi_req_abort_cmd(qc->scsicmd); +} + static void ata_eh_scsidone(struct scsi_cmnd *scmd) { /* nada */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index c9ff83bbcfae..52622b7f8a9e 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -57,6 +57,7 @@ extern int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, unsigned int *classes); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); +extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); @@ -101,5 +102,6 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); +extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index bfcefdca0616..6023f324e68e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -605,7 +605,7 @@ extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); -extern void __ata_qc_complete(struct ata_queued_cmd *qc); +extern void ata_qc_complete(struct ata_queued_cmd *qc); extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_std_bios_param(struct scsi_device *sdev, @@ -882,31 +882,6 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->result_tf.feature = 0; } -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -static inline void ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED)) - return; - - /* read result TF if failed or requested */ - if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); -} - /** * ata_irq_on - Enable interrupts on a port. * @ap: Port on which interrupts are enabled. From 7b70fc039824bc7303e4007a5f758f832de56611 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:07 +0900 Subject: [PATCH 143/258] [PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort() ata_port_schedule_eh() directly schedules EH for @ap without associated qc. Once EH scheduled, no further qc is allowed and EH kicks in as soon as all currently active qc's are drained. ata_port_abort() schedules all currently active commands for EH by qc_completing them with ATA_QCFLAG_FAILED set. If ata_port_abort() doesn't find any qc to abort, it directly schedule EH using ata_port_schedule_eh(). These two functions provide ways to invoke EH for conditions which aren't directly related to any specfic qc. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 2 ++ drivers/scsi/libata-eh.c | 54 ++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-scsi.c | 23 ++++++++++++++++ drivers/scsi/libata.h | 1 + include/linux/libata.h | 4 +++ 5 files changed, 84 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1f5c3270992a..9c97783462d6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5383,5 +5383,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); EXPORT_SYMBOL_GPL(ata_eng_timeout); +EXPORT_SYMBOL_GPL(ata_port_schedule_eh); +EXPORT_SYMBOL_GPL(ata_port_abort); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 471846fe4b73..037a561809f5 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -237,6 +237,60 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) scsi_req_abort_cmd(qc->scsicmd); } +/** + * ata_port_schedule_eh - schedule error handling without a qc + * @ap: ATA port to schedule EH for + * + * Schedule error handling for @ap. EH will kick in as soon as + * all commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_port_schedule_eh(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + ap->flags |= ATA_FLAG_EH_PENDING; + ata_schedule_scsi_eh(ap->host); + + DPRINTK("port EH scheduled\n"); +} + +/** + * ata_port_abort - abort all qc's on the port + * @ap: ATA port to abort qc's for + * + * Abort all active qc's of @ap and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_port_abort(struct ata_port *ap) +{ + int tag, nr_aborted = 0; + + WARN_ON(!ap->ops->error_handler); + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + + if (qc) { + qc->flags |= ATA_QCFLAG_FAILED; + ata_qc_complete(qc); + nr_aborted++; + } + } + + if (!nr_aborted) + ata_port_schedule_eh(ap); + + return nr_aborted; +} + static void ata_eh_scsidone(struct scsi_cmnd *scmd) { /* nada */ diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index a9b4083a4f67..fd7064b9697d 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2596,3 +2596,26 @@ void ata_scsi_scan_host(struct ata_port *ap) } } +/** + * ata_schedule_scsi_eh - schedule EH for SCSI host + * @shost: SCSI host to invoke error handling on. + * + * Schedule SCSI EH without scmd. This is a hack. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + **/ +void ata_schedule_scsi_eh(struct Scsi_Host *shost) +{ + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + + if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 || + scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) { + shost->host_eh_scheduled++; + scsi_eh_wakeup(shost); + } + + spin_unlock_irqrestore(shost->host_lock, flags); +} diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 52622b7f8a9e..b76ad7d7062a 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -98,6 +98,7 @@ extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); +extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); diff --git a/include/linux/libata.h b/include/linux/libata.h index 6023f324e68e..086e14690954 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -662,6 +662,10 @@ extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_ * EH */ extern void ata_eng_timeout(struct ata_port *ap); + +extern void ata_port_schedule_eh(struct ata_port *ap); +extern int ata_port_abort(struct ata_port *ap); + extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); From e318049949b07152d851dbfebbd93e560af45ebe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:09 +0900 Subject: [PATCH 144/258] [PATCH] libata-eh-fw: implement freeze/thaw Freezing is performed atomic w.r.t. host_set->lock and once frozen LLDD is not allowed to access the port or any qc on it. Also, libata makes sure that no new qc gets issued to a frozen port. A frozen port is thawed after a reset operation completes successfully, so reset methods must do its job while the port is frozen. During initialization all ports get frozen before requesting IRQ, so reset methods are always invoked on a frozen port. Optional ->freeze and ->thaw operations notify LLDD that the port is being frozen and thawed, respectively. LLDD can disable/enable hardware interrupt in these callbacks if the controller's IRQ mask can be changed dynamically. If the controller doesn't allow such operation, LLDD can check for frozen state in the interrupt handler and ack/clear interrupts unconditionally while frozen. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 26 +++++++++- drivers/scsi/libata-eh.c | 103 +++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 4 ++ 3 files changed, 131 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9c97783462d6..63857a90ac28 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -987,6 +987,12 @@ unsigned ata_exec_internal(struct ata_device *dev, spin_lock_irqsave(&ap->host_set->lock, flags); + /* no internal command while frozen */ + if (ap->flags & ATA_FLAG_FROZEN) { + spin_unlock_irqrestore(&ap->host_set->lock, flags); + return AC_ERR_SYSTEM; + } + /* initialize internal qc */ /* XXX: Tag 0 is used for drivers with legacy EH as some @@ -2565,8 +2571,11 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) sata_scr_write(ap, SCR_ERROR, serror); /* re-enable interrupts */ - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); + if (!ap->ops->error_handler) { + /* FIXME: hack. create a hook instead */ + if (ap->ioaddr.ctl_addr) + ata_irq_on(ap); + } /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -2681,6 +2690,8 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, { int rc = -EINVAL; + ata_eh_freeze_port(ap); + if (probeinit) probeinit(ap); @@ -2725,6 +2736,9 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (rc == 0) { if (postreset) postreset(ap, classes); + + ata_eh_thaw_port(ap); + if (classes[0] == ATA_DEV_UNKNOWN) rc = -ENODEV; } @@ -4039,6 +4053,10 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) struct ata_queued_cmd *qc = NULL; unsigned int i; + /* no command while frozen */ + if (unlikely(ap->flags & ATA_FLAG_FROZEN)) + return NULL; + /* the last tag is reserved for internal command. */ for (i = 0; i < ATA_MAX_QUEUE - 1; i++) if (!test_and_set_bit(i, &ap->qactive)) { @@ -4953,6 +4971,7 @@ int ata_device_add(const struct ata_probe_ent *ent) ata_chk_status(ap); host_set->ops->irq_clear(ap); + ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ count++; } @@ -5385,5 +5404,8 @@ EXPORT_SYMBOL_GPL(ata_scsi_device_resume); EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_port_abort); +EXPORT_SYMBOL_GPL(ata_port_freeze); +EXPORT_SYMBOL_GPL(ata_eh_freeze_port); +EXPORT_SYMBOL_GPL(ata_eh_thaw_port); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 037a561809f5..cb4e2b8d32d9 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -291,6 +291,109 @@ int ata_port_abort(struct ata_port *ap) return nr_aborted; } +/** + * __ata_port_freeze - freeze port + * @ap: ATA port to freeze + * + * This function is called when HSM violation or some other + * condition disrupts normal operation of the port. Frozen port + * is not allowed to perform any operation until the port is + * thawed, which usually follows a successful reset. + * + * ap->ops->freeze() callback can be used for freezing the port + * hardware-wise (e.g. mask interrupt and stop DMA engine). If a + * port cannot be frozen hardware-wise, the interrupt handler + * must ack and clear interrupts unconditionally while the port + * is frozen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +static void __ata_port_freeze(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + if (ap->ops->freeze) + ap->ops->freeze(ap); + + ap->flags |= ATA_FLAG_FROZEN; + + DPRINTK("ata%u port frozen\n", ap->id); +} + +/** + * ata_port_freeze - abort & freeze port + * @ap: ATA port to freeze + * + * Abort and freeze @ap. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted commands. + */ +int ata_port_freeze(struct ata_port *ap) +{ + int nr_aborted; + + WARN_ON(!ap->ops->error_handler); + + nr_aborted = ata_port_abort(ap); + __ata_port_freeze(ap); + + return nr_aborted; +} + +/** + * ata_eh_freeze_port - EH helper to freeze port + * @ap: ATA port to freeze + * + * Freeze @ap. + * + * LOCKING: + * None. + */ +void ata_eh_freeze_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(&ap->host_set->lock, flags); + __ata_port_freeze(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + +/** + * ata_port_thaw_port - EH helper to thaw port + * @ap: ATA port to thaw + * + * Thaw frozen port @ap. + * + * LOCKING: + * None. + */ +void ata_eh_thaw_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + ap->flags &= ~ATA_FLAG_FROZEN; + + if (ap->ops->thaw) + ap->ops->thaw(ap); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("ata%u port thawed\n", ap->id); +} + static void ata_eh_scsidone(struct scsi_cmnd *scmd) { /* nada */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 086e14690954..6758b4d374a0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -665,6 +665,10 @@ extern void ata_eng_timeout(struct ata_port *ap); extern void ata_port_schedule_eh(struct ata_port *ap); extern int ata_port_abort(struct ata_port *ap); +extern int ata_port_freeze(struct ata_port *ap); + +extern void ata_eh_freeze_port(struct ata_port *ap); +extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); From dafadcde8d4dc5ea8c742faa7ff4403336b542b8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:11 +0900 Subject: [PATCH 145/258] [PATCH] libata-eh-fw: implement new EH scheduling from PIO PIO executes without holding host_set lock, so it cannot be synchronized using the same mechanism as interrupt driven execution. port_task framework makes sure that EH is not entered until PIO task is flushed, so PIO task can be sure the qc in progress won't go away underneath it. One thing it cannot be sure of is whether the qc has already been scheduled for EH by another exception condition while host_set lock was released. This patch makes ata_poll_qc-complete() handle such conditions properly and make it freeze the port if HSM violation is detected during PIO execution. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 63857a90ac28..35ae5b41f662 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3430,16 +3430,31 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * LOCKING: * None. (grabs host lock) */ - void ata_poll_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; unsigned long flags; spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_irq_on(ap); - ata_qc_complete(qc); + + if (ap->ops->error_handler) { + /* EH might have kicked in while host_set lock is released */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (!(qc->err_mask & AC_ERR_HSM)) { + ap->flags &= ~ATA_FLAG_NOINTR; + ata_irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + } else { + /* old EH */ + ap->flags &= ~ATA_FLAG_NOINTR; + ata_irq_on(ap); + ata_qc_complete(qc); + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); } From ad9e27624479bd167dd7eac0cea4bb3ad13bc926 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:12 +0900 Subject: [PATCH 146/258] [PATCH] libata-eh-fw: update ata_scsi_error() for new EH Update ata_scsi_error() for new EH. ata_scsi_error() is responsible for claiming timed out qcs and invoking ->error_handler in safe and synchronized manner. As the state of the controller is unknown if a qc has timed out, the port is frozen in such cases. Note that ata_scsi_timed_out() isn't used for new EH. This is because a timed out qc cannot be claimed by EH without freezing the port and freezing the port in ata_scsi_timed_out() results in unnecessary abortion of other active qcs. ata_scsi_timed_out() can be removed once all drivers are converted to new EH. While at it, add 'TODO: kill' comments to old EH functions. Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 136 +++++++++++++++++++++++++++++++++++++-- include/linux/libata.h | 3 + 2 files changed, 134 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index cb4e2b8d32d9..0803231f6577 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -44,6 +44,8 @@ #include "libata.h" +static void __ata_port_freeze(struct ata_port *ap); + /** * ata_scsi_timed_out - SCSI layer time out callback * @cmd: timed out SCSI command @@ -55,6 +57,8 @@ * from finishing it by setting EH_SCHEDULED and return * EH_NOT_HANDLED. * + * TODO: kill this function once old EH is gone. + * * LOCKING: * Called from timer context * @@ -67,10 +71,16 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) struct ata_port *ap = ata_shost_to_port(host); unsigned long flags; struct ata_queued_cmd *qc; - enum scsi_eh_timer_return ret = EH_HANDLED; + enum scsi_eh_timer_return ret; DPRINTK("ENTER\n"); + if (ap->ops->error_handler) { + ret = EH_NOT_HANDLED; + goto out; + } + + ret = EH_HANDLED; spin_lock_irqsave(&ap->host_set->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); if (qc) { @@ -81,6 +91,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) } spin_unlock_irqrestore(&ap->host_set->lock, flags); + out: DPRINTK("EXIT, ret=%d\n", ret); return ret; } @@ -100,21 +111,132 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) void ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap = ata_shost_to_port(host); + spinlock_t *hs_lock = &ap->host_set->lock; + int i, repeat_cnt = ATA_EH_MAX_REPEAT; + unsigned long flags; DPRINTK("ENTER\n"); - /* synchronize with IRQ handler and port task */ - spin_unlock_wait(&ap->host_set->lock); + /* synchronize with port task */ ata_port_flush_task(ap); - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + /* synchronize with host_set lock and sort out timeouts */ - ap->ops->eng_timeout(ap); + /* For new EH, all qcs are finished in one of three ways - + * normal completion, error completion, and SCSI timeout. + * Both cmpletions can race against SCSI timeout. When normal + * completion wins, the qc never reaches EH. When error + * completion wins, the qc has ATA_QCFLAG_FAILED set. + * + * When SCSI timeout wins, things are a bit more complex. + * Normal or error completion can occur after the timeout but + * before this point. In such cases, both types of + * completions are honored. A scmd is determined to have + * timed out iff its associated qc is active and not failed. + */ + if (ap->ops->error_handler) { + struct scsi_cmnd *scmd, *tmp; + int nr_timedout = 0; + spin_lock_irqsave(hs_lock, flags); + + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { + struct ata_queued_cmd *qc; + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + qc = __ata_qc_from_tag(ap, i); + if (qc->flags & ATA_QCFLAG_ACTIVE && + qc->scsicmd == scmd) + break; + } + + if (i < ATA_MAX_QUEUE) { + /* the scmd has an associated qc */ + if (!(qc->flags & ATA_QCFLAG_FAILED)) { + /* which hasn't failed yet, timeout */ + qc->err_mask |= AC_ERR_TIMEOUT; + qc->flags |= ATA_QCFLAG_FAILED; + nr_timedout++; + } + } else { + /* Normal completion occurred after + * SCSI timeout but before this point. + * Successfully complete it. + */ + scmd->retries = scmd->allowed; + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); + } + } + + /* If we have timed out qcs. They belong to EH from + * this point but the state of the controller is + * unknown. Freeze the port to make sure the IRQ + * handler doesn't diddle with those qcs. This must + * be done atomically w.r.t. setting QCFLAG_FAILED. + */ + if (nr_timedout) + __ata_port_freeze(ap); + + spin_unlock_irqrestore(hs_lock, flags); + } else + spin_unlock_wait(hs_lock); + + repeat: + /* invoke error handler */ + if (ap->ops->error_handler) { + /* clear EH pending */ + spin_lock_irqsave(hs_lock, flags); + ap->flags &= ~ATA_FLAG_EH_PENDING; + spin_unlock_irqrestore(hs_lock, flags); + + /* invoke EH */ + ap->ops->error_handler(ap); + + /* Exception might have happend after ->error_handler + * recovered the port but before this point. Repeat + * EH in such case. + */ + spin_lock_irqsave(hs_lock, flags); + + if (ap->flags & ATA_FLAG_EH_PENDING) { + if (--repeat_cnt) { + ata_port_printk(ap, KERN_INFO, + "EH pending after completion, " + "repeating EH (cnt=%d)\n", repeat_cnt); + spin_unlock_irqrestore(hs_lock, flags); + goto repeat; + } + ata_port_printk(ap, KERN_ERR, "EH pending after %d " + "tries, giving up\n", ATA_EH_MAX_REPEAT); + } + + /* Clear host_eh_scheduled while holding hs_lock such + * that if exception occurs after this point but + * before EH completion, SCSI midlayer will + * re-initiate EH. + */ + host->host_eh_scheduled = 0; + + spin_unlock_irqrestore(hs_lock, flags); + } else { + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + ap->ops->eng_timeout(ap); + } + + /* finish or retry handled scmd's and clean up */ WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); scsi_eh_flush_done_q(&ap->eh_done_q); + /* clean up */ + spin_lock_irqsave(hs_lock, flags); + + if (ap->flags & ATA_FLAG_RECOVERED) + ata_port_printk(ap, KERN_INFO, "EH complete\n"); + ap->flags &= ~ATA_FLAG_RECOVERED; + + spin_unlock_irqrestore(hs_lock, flags); + DPRINTK("EXIT\n"); } @@ -133,6 +255,8 @@ void ata_scsi_error(struct Scsi_Host *host) * an interrupt was not delivered to the driver, even though the * transaction completed successfully. * + * TODO: kill this function once old EH is gone. + * * LOCKING: * Inherited from SCSI layer (none, can sleep) */ @@ -198,6 +322,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) * an interrupt was not delivered to the driver, even though the * transaction completed successfully. * + * TODO: kill this function once old EH is gone. + * * LOCKING: * Inherited from SCSI layer (none, can sleep) */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 6758b4d374a0..5ad50163c8ef 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -225,6 +225,9 @@ enum { ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), + /* max repeat if error condition is still set after ->error_handler */ + ATA_EH_MAX_REPEAT = 5, + /* how hard are we gonna try to probe/recover devices */ ATA_PROBE_MAX_TRIES = 3, }; From d95a717f579e81061830a308125c89f5858f740a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:14 +0900 Subject: [PATCH 147/258] [PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 35ae5b41f662..4def48ed6f46 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -984,6 +984,7 @@ unsigned ata_exec_internal(struct ata_device *dev, DECLARE_COMPLETION(wait); unsigned long flags; unsigned int err_mask; + int rc; spin_lock_irqsave(&ap->host_set->lock, flags); @@ -1036,20 +1037,25 @@ unsigned ata_exec_internal(struct ata_device *dev, spin_unlock_irqrestore(&ap->host_set->lock, flags); - if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) { - ata_port_flush_task(ap); + rc = wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL); + ata_port_flush_task(ap); + + if (!rc) { spin_lock_irqsave(&ap->host_set->lock, flags); /* We're racing with irq here. If we lose, the * following test prevents us from completing the qc - * again. If completion irq occurs after here but - * before the caller cleans up, it will result in a - * spurious interrupt. We can live with that. + * twice. If we win, the port is frozen and will be + * cleaned up by ->post_internal_cmd(). */ if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask = AC_ERR_TIMEOUT; - ata_qc_complete(qc); + qc->err_mask |= AC_ERR_TIMEOUT; + + if (ap->ops->error_handler) + ata_port_freeze(ap); + else + ata_qc_complete(qc); ata_dev_printk(dev, KERN_WARNING, "qc timeout (cmd 0x%x)\n", command); @@ -1058,6 +1064,16 @@ unsigned ata_exec_internal(struct ata_device *dev, spin_unlock_irqrestore(&ap->host_set->lock, flags); } + /* do post_internal_cmd */ + if (ap->ops->post_internal_cmd) + ap->ops->post_internal_cmd(qc); + + if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { + ata_dev_printk(dev, KERN_WARNING, "zero err_mask for failed " + "internal command, assuming AC_ERR_OTHER\n"); + qc->err_mask |= AC_ERR_OTHER; + } + /* finish up */ spin_lock_irqsave(&ap->host_set->lock, flags); From 246619da308c6910a3ae30e7e5fbf46139619efe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:16 +0900 Subject: [PATCH 148/258] [PATCH] libata-eh-fw: update SCSI command completion path for new EH SCSI command completion path used to do some part of EH including printing messages and obtaining sense data. With new EH, all these are responsibilities of the EH, update SCSI command completion path to reflect this. Signed-off-by: Tejun Heo --- drivers/scsi/libata-scsi.c | 48 +++++++++++++++++++++++++++++--------- 1 file changed, 37 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index fd7064b9697d..e61cc357ae4a 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -415,6 +415,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) * @sk: the sense key we'll fill out * @asc: the additional sense code we'll fill out * @ascq: the additional sense code qualifier we'll fill out + * @verbose: be verbose * * Converts an ATA error into a SCSI error. Fill out pointers to * SK, ASC, and ASCQ bytes for later use in fixed or descriptor @@ -424,7 +425,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) * spin_lock_irqsave(host_set lock) */ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, - u8 *ascq) + u8 *ascq, int verbose) { int i; @@ -489,8 +490,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, } } /* No immediate match */ - printk(KERN_WARNING "ata%u: no sense translation for " - "error 0x%02x\n", id, drv_err); + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); } /* Fall back to interpreting status bits */ @@ -503,8 +505,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, } } /* No error? Undecoded? */ - printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", - id, drv_stat); + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "status: 0x%02x\n", id, drv_stat); /* We need a sensible error return here, which is tricky, and one that won't cause people to do things like return a disk wrongly */ @@ -513,9 +516,10 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, *ascq = 0x00; translate_done: - printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " - "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err, - *sk, *asc, *ascq); + if (verbose) + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " + "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", + id, drv_stat, drv_err, *sk, *asc, *ascq); return; } @@ -538,6 +542,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); @@ -550,7 +555,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) if (qc->err_mask || tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[1], &sb[2], &sb[3]); + &sb[1], &sb[2], &sb[3], verbose); sb[1] &= 0x0f; } @@ -608,6 +613,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) struct scsi_cmnd *cmd = qc->scsicmd; struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; + int verbose = qc->ap->ops->error_handler == NULL; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); @@ -620,7 +626,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) if (qc->err_mask || tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[2], &sb[12], &sb[13]); + &sb[2], &sb[12], &sb[13], verbose); sb[2] &= 0x0f; } @@ -1212,7 +1218,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } - if (need_sense) + if (need_sense && !qc->ap->ops->error_handler) ata_dump_status(qc->ap->id, &qc->result_tf); qc->scsidone(cmd); @@ -2060,6 +2066,26 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) VPRINTK("ENTER, err_mask 0x%X\n", err_mask); + /* handle completion from new EH */ + if (unlikely(qc->ap->ops->error_handler && + (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { + + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into a + * sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; + qc->scsidone(cmd); + ata_qc_free(qc); + return; + } + + /* successful completion or old EH failure path */ if (unlikely(err_mask & AC_ERR_DEV)) { cmd->result = SAM_STAT_CHECK_CONDITION; atapi_request_sense(qc); From 9be1e979f2e1e57a091a658fa88dac266f9fd6fe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:17 +0900 Subject: [PATCH 149/258] [PATCH] libata-eh: add ATA and libata flags for new EH Add ATA and libata flags to be used by new EH. Signed-off-by: Tejun Heo --- include/linux/ata.h | 13 +++++++++++++ include/linux/libata.h | 8 ++++++++ 2 files changed, 21 insertions(+) diff --git a/include/linux/ata.h b/include/linux/ata.h index 312a2c0c64e6..a7c41f3df8f4 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -97,6 +97,9 @@ enum { ATA_DRQ = (1 << 3), /* data request i/o */ ATA_ERR = (1 << 0), /* have an error */ ATA_SRST = (1 << 2), /* software reset */ + ATA_ICRC = (1 << 7), /* interface CRC error */ + ATA_UNC = (1 << 6), /* uncorrectable media error */ + ATA_IDNF = (1 << 4), /* ID not found */ ATA_ABORTED = (1 << 2), /* command aborted */ /* ATA command block registers */ @@ -192,6 +195,16 @@ enum { SCR_ACTIVE = 3, SCR_NOTIFICATION = 4, + /* SError bits */ + SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */ + SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */ + SERR_DATA = (1 << 8), /* unrecovered data error */ + SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */ + SERR_PROTOCOL = (1 << 10), /* protocol violation */ + SERR_INTERNAL = (1 << 11), /* host internal error */ + SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */ + SERR_DEV_XCHG = (1 << 26), /* device exchanged */ + /* struct ata_taskfile flags */ ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */ ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 5ad50163c8ef..6fe5ed8eabf5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -155,6 +155,7 @@ enum { ATA_FLAG_EH_PENDING = (1 << 16), /* EH pending */ ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ + ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ @@ -225,6 +226,13 @@ enum { ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), + /* reset / recovery action types */ + ATA_EH_REVALIDATE = (1 << 0), + ATA_EH_SOFTRESET = (1 << 1), + ATA_EH_HARDRESET = (1 << 2), + + ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, + /* max repeat if error condition is still set after ->error_handler */ ATA_EH_MAX_REPEAT = 5, From 0c247c559cd70f85ba9f0764ce13ae00e20fcad8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:19 +0900 Subject: [PATCH 150/258] [PATCH] libata-eh: implement dev->ering This patch implements ata_ering and uses it to define dev->ering. ata_ering is a ring buffer which records libata errors - whether a command was for normar IO request, err_mask and timestamp. Errors are recorded per-device in dev->ering. This will be used by EH to determine recovery actions. Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 45 ++++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 17 +++++++++++++++ 2 files changed, 62 insertions(+) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 0803231f6577..71ad18b7cff6 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -46,6 +46,51 @@ static void __ata_port_freeze(struct ata_port *ap); +static void ata_ering_record(struct ata_ering *ering, int is_io, + unsigned int err_mask) +{ + struct ata_ering_entry *ent; + + WARN_ON(!err_mask); + + ering->cursor++; + ering->cursor %= ATA_ERING_SIZE; + + ent = &ering->ring[ering->cursor]; + ent->is_io = is_io; + ent->err_mask = err_mask; + ent->timestamp = get_jiffies_64(); +} + +static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering) +{ + struct ata_ering_entry *ent = &ering->ring[ering->cursor]; + if (!ent->err_mask) + return NULL; + return ent; +} + +static int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg) +{ + int idx, rc = 0; + struct ata_ering_entry *ent; + + idx = ering->cursor; + do { + ent = &ering->ring[idx]; + if (!ent->err_mask) + break; + rc = map_fn(ent, arg); + if (rc) + break; + idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE; + } while (idx != ering->cursor); + + return rc; +} + /** * ata_scsi_timed_out - SCSI layer time out callback * @cmd: timed out SCSI command diff --git a/include/linux/libata.h b/include/linux/libata.h index 6fe5ed8eabf5..f5cea13599c3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -226,6 +226,9 @@ enum { ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), + /* ering size */ + ATA_ERING_SIZE = 32, + /* reset / recovery action types */ ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), @@ -375,6 +378,17 @@ struct ata_host_stats { unsigned long rw_reqbuf; }; +struct ata_ering_entry { + int is_io; + unsigned int err_mask; + u64 timestamp; +}; + +struct ata_ering { + int cursor; + struct ata_ering_entry ring[ATA_ERING_SIZE]; +}; + struct ata_device { struct ata_port *ap; u64 n_sectors; /* size of device, if ATA */ @@ -401,6 +415,9 @@ struct ata_device { u16 cylinders; /* Number of cylinders */ u16 heads; /* Number of heads */ u16 sectors; /* Number of sectors per track */ + + /* error history */ + struct ata_ering ering; }; struct ata_port { From f3e81b19aac23c0e8c55d5961324ef7de44c23bb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:21 +0900 Subject: [PATCH 151/258] [PATCH] libata-eh: implement ata_eh_info and ata_eh_context struct ata_eh_info serves as the communication channel between execution path and EH. Execution path describes detected error condition in ap->eh_info and EH recovers the port using it. To avoid missing error conditions detected during EH, EH makes its own copy of eh_info and clears it on entry allowing error info to accumulate during EH. Most EH states including EH's copy of eh_info are stored in ap->eh_context (struct ata_eh_context) which is owned by EH and thus doesn't require any synchronization to access and alter. This standardized context makes it easy to integrate various parts of EH and extend EH to handle multiple links (for PM). Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 11 ++++++++++- include/linux/libata.h | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 71ad18b7cff6..1968f2d140f3 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -229,9 +229,15 @@ void ata_scsi_error(struct Scsi_Host *host) repeat: /* invoke error handler */ if (ap->ops->error_handler) { - /* clear EH pending */ + /* fetch & clear EH info */ spin_lock_irqsave(hs_lock, flags); + + memset(&ap->eh_context, 0, sizeof(ap->eh_context)); + ap->eh_context.i = ap->eh_info; + memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + ap->flags &= ~ATA_FLAG_EH_PENDING; + spin_unlock_irqrestore(hs_lock, flags); /* invoke EH */ @@ -255,6 +261,9 @@ void ata_scsi_error(struct Scsi_Host *host) "tries, giving up\n", ATA_EH_MAX_REPEAT); } + /* this run is complete, make sure EH info is clear */ + memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + /* Clear host_eh_scheduled while holding hs_lock such * that if exception occurs after this point but * before EH completion, SCSI midlayer will diff --git a/include/linux/libata.h b/include/linux/libata.h index f5cea13599c3..298f9918e375 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -229,6 +229,9 @@ enum { /* ering size */ ATA_ERING_SIZE = 32, + /* desc_len for ata_eh_info and context */ + ATA_EH_DESC_LEN = 80, + /* reset / recovery action types */ ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), @@ -236,6 +239,9 @@ enum { ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, + /* ata_eh_info->flags */ + ATA_EHI_DID_RESET = (1 << 0), /* already reset this port */ + /* max repeat if error condition is still set after ->error_handler */ ATA_EH_MAX_REPEAT = 5, @@ -420,6 +426,21 @@ struct ata_device { struct ata_ering ering; }; +struct ata_eh_info { + struct ata_device *dev; /* offending device */ + u32 serror; /* SError from LLDD */ + unsigned int err_mask; /* port-wide err_mask */ + unsigned int action; /* ATA_EH_* action mask */ + unsigned int flags; /* ATA_EHI_* flags */ + char desc[ATA_EH_DESC_LEN]; + int desc_len; +}; + +struct ata_eh_context { + struct ata_eh_info i; + int tries[ATA_MAX_DEVICES]; +}; + struct ata_port { struct Scsi_Host *host; /* our co-allocated scsi host */ const struct ata_port_operations *ops; @@ -444,6 +465,11 @@ struct ata_port { unsigned int cbl; /* cable type; ATA_CBL_xxx */ unsigned int sata_spd_limit; /* SATA PHY speed limit */ + /* record runtime error info, protected by host_set lock */ + struct ata_eh_info eh_info; + /* EH context owned by EH */ + struct ata_eh_context eh_context; + struct ata_device device[ATA_MAX_DEVICES]; struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; @@ -710,6 +736,20 @@ extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); #define ata_dev_printk(dev, lv, fmt, args...) \ printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args) +/* + * ata_eh_info helpers + */ +#define ata_ehi_push_desc(ehi, fmt, args...) do { \ + (ehi)->desc_len += scnprintf((ehi)->desc + (ehi)->desc_len, \ + ATA_EH_DESC_LEN - (ehi)->desc_len, \ + fmt , ##args); \ +} while (0) + +#define ata_ehi_clear_desc(ehi) do { \ + (ehi)->desc[0] = '\0'; \ + (ehi)->desc_len = 0; \ +} while (0) + /* * qc helpers */ From 022bdb075b9e1f224088a0b268de56268d7bc5b6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:22 +0900 Subject: [PATCH 152/258] [PATCH] libata-eh: implement new EH Implement new EH. The exported interface is ata_do_eh() which is to be called from ->error_handler and performs the following steps to recover the failed port. ata_eh_autopsy() : analyze SError/TF, determine the cause of failure and required recovery actions and record it in ap->eh_context ata_eh_report() : report the failure to user ata_eh_recover() : perform recovery actions described in ap->eh_context ata_eh_finish() : finish failed qcs LLDDs can customize error handling by modifying eh_context before calling ata_do_eh() or, if necessary, doing so inbetween each major steps by calling each step explicitly. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 775 +++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 5 + 3 files changed, 781 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4def48ed6f46..ddc47097d37e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5440,3 +5440,4 @@ EXPORT_SYMBOL_GPL(ata_eh_freeze_port); EXPORT_SYMBOL_GPL(ata_eh_thaw_port); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); +EXPORT_SYMBOL_GPL(ata_do_eh); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 1968f2d140f3..cd133f83e595 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -626,3 +626,778 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc) scmd->retries--; __ata_eh_qc_complete(qc); } + +/** + * ata_eh_about_to_do - about to perform eh_action + * @ap: target ATA port + * @action: action about to be performed + * + * Called just before performing EH actions to clear related bits + * in @ap->eh_info such that eh actions are not unnecessarily + * repeated. + * + * LOCKING: + * None. + */ +static void ata_eh_about_to_do(struct ata_port *ap, unsigned int action) +{ + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->eh_info.action &= ~action; + ap->flags |= ATA_FLAG_RECOVERED; + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + +/** + * ata_err_string - convert err_mask to descriptive string + * @err_mask: error mask to convert to string + * + * Convert @err_mask to descriptive string. Errors are + * prioritized according to severity and only the most severe + * error is reported. + * + * LOCKING: + * None. + * + * RETURNS: + * Descriptive string for @err_mask + */ +static const char * ata_err_string(unsigned int err_mask) +{ + if (err_mask & AC_ERR_HOST_BUS) + return "host bus error"; + if (err_mask & AC_ERR_ATA_BUS) + return "ATA bus error"; + if (err_mask & AC_ERR_TIMEOUT) + return "timeout"; + if (err_mask & AC_ERR_HSM) + return "HSM violation"; + if (err_mask & AC_ERR_SYSTEM) + return "internal error"; + if (err_mask & AC_ERR_MEDIA) + return "media error"; + if (err_mask & AC_ERR_INVALID) + return "invalid argument"; + if (err_mask & AC_ERR_DEV) + return "device error"; + return "unknown error"; +} + +/** + * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE + * @dev: device to perform REQUEST_SENSE to + * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * + * Perform ATAPI REQUEST_SENSE after the device reported CHECK + * SENSE. This function is EH helper. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure + */ +static unsigned int atapi_eh_request_sense(struct ata_device *dev, + unsigned char *sense_buf) +{ + struct ata_port *ap = dev->ap; + struct ata_taskfile tf; + u8 cdb[ATAPI_CDB_LEN]; + + DPRINTK("ATAPI request sense\n"); + + ata_tf_init(dev, &tf); + + /* FIXME: is this needed? */ + memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); + + /* XXX: why tf_read here? */ + ap->ops->tf_read(ap, &tf); + + /* fill these in, for the case where they are -not- overwritten */ + sense_buf[0] = 0x70; + sense_buf[2] = tf.feature >> 4; + + memset(cdb, 0, ATAPI_CDB_LEN); + cdb[0] = REQUEST_SENSE; + cdb[4] = SCSI_SENSE_BUFFERSIZE; + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + + /* is it pointless to prefer PIO for "safety reasons"? */ + if (ap->flags & ATA_FLAG_PIO_DMA) { + tf.protocol = ATA_PROT_ATAPI_DMA; + tf.feature |= ATAPI_PKT_DMA; + } else { + tf.protocol = ATA_PROT_ATAPI; + tf.lbam = (8 * 1024) & 0xff; + tf.lbah = (8 * 1024) >> 8; + } + + return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + sense_buf, SCSI_SENSE_BUFFERSIZE); +} + +/** + * ata_eh_analyze_serror - analyze SError for a failed port + * @ap: ATA port to analyze SError for + * + * Analyze SError if available and further determine cause of + * failure. + * + * LOCKING: + * None. + */ +static void ata_eh_analyze_serror(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + u32 serror = ehc->i.serror; + unsigned int err_mask = 0, action = 0; + + if (serror & SERR_PERSISTENT) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_HARDRESET; + } + if (serror & + (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + } + if (serror & SERR_PROTOCOL) { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_SOFTRESET; + } + if (serror & SERR_INTERNAL) { + err_mask |= AC_ERR_SYSTEM; + action |= ATA_EH_SOFTRESET; + } + if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_HARDRESET; + } + + ehc->i.err_mask |= err_mask; + ehc->i.action |= action; +} + +/** + * ata_eh_analyze_tf - analyze taskfile of a failed qc + * @qc: qc to analyze + * @tf: Taskfile registers to analyze + * + * Analyze taskfile of @qc and further determine cause of + * failure. This function also requests ATAPI sense data if + * avaliable. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Determined recovery action + */ +static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, + const struct ata_taskfile *tf) +{ + unsigned int tmp, action = 0; + u8 stat = tf->command, err = tf->feature; + + if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) { + qc->err_mask |= AC_ERR_HSM; + return ATA_EH_SOFTRESET; + } + + if (!(qc->err_mask & AC_ERR_DEV)) + return 0; + + switch (qc->dev->class) { + case ATA_DEV_ATA: + if (err & ATA_ICRC) + qc->err_mask |= AC_ERR_ATA_BUS; + if (err & ATA_UNC) + qc->err_mask |= AC_ERR_MEDIA; + if (err & ATA_IDNF) + qc->err_mask |= AC_ERR_INVALID; + break; + + case ATA_DEV_ATAPI: + tmp = atapi_eh_request_sense(qc->dev, + qc->scsicmd->sense_buffer); + if (!tmp) { + /* ATA_QCFLAG_SENSE_VALID is used to tell + * atapi_qc_complete() that sense data is + * already valid. + * + * TODO: interpret sense data and set + * appropriate err_mask. + */ + qc->flags |= ATA_QCFLAG_SENSE_VALID; + } else + qc->err_mask |= tmp; + } + + if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS)) + action |= ATA_EH_SOFTRESET; + + return action; +} + +static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent) +{ + if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT)) + return 1; + + if (ent->is_io) { + if (ent->err_mask & AC_ERR_HSM) + return 1; + if ((ent->err_mask & + (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) + return 2; + } + + return 0; +} + +struct speed_down_needed_arg { + u64 since; + int nr_errors[3]; +}; + +static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg) +{ + struct speed_down_needed_arg *arg = void_arg; + + if (ent->timestamp < arg->since) + return -1; + + arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++; + return 0; +} + +/** + * ata_eh_speed_down_needed - Determine wheter speed down is necessary + * @dev: Device of interest + * + * This function examines error ring of @dev and determines + * whether speed down is necessary. Speed down is necessary if + * there have been more than 3 of Cat-1 errors or 10 of Cat-2 + * errors during last 15 minutes. + * + * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM + * violation for known supported commands. + * + * Cat-2 errors are unclassified DEV error for known supported + * command. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if speed down is necessary, 0 otherwise + */ +static int ata_eh_speed_down_needed(struct ata_device *dev) +{ + const u64 interval = 15LLU * 60 * HZ; + static const int err_limits[3] = { -1, 3, 10 }; + struct speed_down_needed_arg arg; + struct ata_ering_entry *ent; + int err_cat; + u64 j64; + + ent = ata_ering_top(&dev->ering); + if (!ent) + return 0; + + err_cat = ata_eh_categorize_ering_entry(ent); + if (err_cat == 0) + return 0; + + memset(&arg, 0, sizeof(arg)); + + j64 = get_jiffies_64(); + if (j64 >= interval) + arg.since = j64 - interval; + else + arg.since = 0; + + ata_ering_map(&dev->ering, speed_down_needed_cb, &arg); + + return arg.nr_errors[err_cat] > err_limits[err_cat]; +} + +/** + * ata_eh_speed_down - record error and speed down if necessary + * @dev: Failed device + * @is_io: Did the device fail during normal IO? + * @err_mask: err_mask of the error + * + * Record error and examine error history to determine whether + * adjusting transmission speed is necessary. It also sets + * transmission limits appropriately if such adjustment is + * necessary. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_speed_down(struct ata_device *dev, int is_io, + unsigned int err_mask) +{ + if (!err_mask) + return 0; + + /* record error and determine whether speed down is necessary */ + ata_ering_record(&dev->ering, is_io, err_mask); + + if (!ata_eh_speed_down_needed(dev)) + return 0; + + /* speed down SATA link speed if possible */ + if (sata_down_spd_limit(dev->ap) == 0) + return ATA_EH_HARDRESET; + + /* lower transfer mode */ + if (ata_down_xfermask_limit(dev, 0) == 0) + return ATA_EH_SOFTRESET; + + ata_dev_printk(dev, KERN_ERR, + "speed down requested but no transfer mode left\n"); + return 0; +} + +/** + * ata_eh_autopsy - analyze error and determine recovery action + * @ap: ATA port to perform autopsy on + * + * Analyze why @ap failed and determine which recovery action is + * needed. This function also sets more detailed AC_ERR_* values + * and fills sense data for ATAPI CHECK SENSE. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_autopsy(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned int action = ehc->i.action; + struct ata_device *failed_dev = NULL; + unsigned int all_err_mask = 0; + int tag, is_io = 0; + u32 serror; + int rc; + + DPRINTK("ENTER\n"); + + /* obtain and analyze SError */ + rc = sata_scr_read(ap, SCR_ERROR, &serror); + if (rc == 0) { + ehc->i.serror |= serror; + ata_eh_analyze_serror(ap); + } else if (rc != -EOPNOTSUPP) + action |= ATA_EH_HARDRESET; + + /* any real error trumps AC_ERR_OTHER */ + if (ehc->i.err_mask & ~AC_ERR_OTHER) + ehc->i.err_mask &= ~AC_ERR_OTHER; + + all_err_mask |= ehc->i.err_mask; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + /* inherit upper level err_mask */ + qc->err_mask |= ehc->i.err_mask; + + if (qc->err_mask & AC_ERR_TIMEOUT) + action |= ATA_EH_SOFTRESET; + + /* analyze TF */ + action |= ata_eh_analyze_tf(qc, &qc->result_tf); + + /* DEV errors are probably spurious in case of ATA_BUS error */ + if (qc->err_mask & AC_ERR_ATA_BUS) + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA | + AC_ERR_INVALID); + + /* any real error trumps unknown error */ + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; + + /* SENSE_VALID trumps dev/unknown error and revalidation */ + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); + action &= ~ATA_EH_REVALIDATE; + } + + /* accumulate error info */ + failed_dev = qc->dev; + all_err_mask |= qc->err_mask; + if (qc->flags & ATA_QCFLAG_IO) + is_io = 1; + } + + /* speed down iff command was in progress */ + if (failed_dev) + action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); + + if (all_err_mask) + action |= ATA_EH_REVALIDATE; + + ehc->i.dev = failed_dev; + ehc->i.action = action; + + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_report - report error handling to user + * @ap: ATA port EH is going on + * + * Report EH to user. + * + * LOCKING: + * None. + */ +static void ata_eh_report(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const char *frozen, *desc; + int tag, nr_failed = 0; + + desc = NULL; + if (ehc->i.desc[0] != '\0') + desc = ehc->i.desc; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) + continue; + + nr_failed++; + } + + if (!nr_failed && !ehc->i.err_mask) + return; + + frozen = ""; + if (ap->flags & ATA_FLAG_FROZEN) + frozen = " frozen"; + + if (ehc->i.dev) { + ata_dev_printk(ehc->i.dev, KERN_ERR, + "exception Emask 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ehc->i.serror, ehc->i.action, + frozen); + if (desc) + ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc); + } else { + ata_port_printk(ap, KERN_ERR, + "exception Emask 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ehc->i.serror, ehc->i.action, + frozen); + if (desc) + ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); + } + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) + continue; + + ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x " + "Emask 0x%x stat 0x%x err 0x%x (%s)\n", + qc->tag, qc->tf.command, qc->err_mask, + qc->result_tf.command, qc->result_tf.feature, + ata_err_string(qc->err_mask)); + } +} + +static int ata_eh_reset(struct ata_port *ap, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned int classes[ATA_MAX_DEVICES]; + int tries = ATA_EH_RESET_TRIES; + ata_reset_fn_t reset; + int rc; + + if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && + !(ehc->i.action & ATA_EH_HARDRESET)))) + reset = softreset; + else + reset = hardreset; + + retry: + ata_port_printk(ap, KERN_INFO, "%s resetting port\n", + reset == softreset ? "soft" : "hard"); + + /* reset */ + ata_eh_about_to_do(ap, ATA_EH_RESET_MASK); + ehc->i.flags |= ATA_EHI_DID_RESET; + + rc = ata_do_reset(ap, reset, classes); + + if (rc && --tries) { + ata_port_printk(ap, KERN_WARNING, + "%sreset failed, retrying in 5 secs\n", + reset == softreset ? "soft" : "hard"); + ssleep(5); + + if (reset == hardreset) + sata_down_spd_limit(ap); + if (hardreset) + reset = hardreset; + goto retry; + } + + if (rc == 0) { + if (postreset) + postreset(ap, classes); + + /* reset successful, schedule revalidation */ + ehc->i.dev = NULL; + ehc->i.action &= ~ATA_EH_RESET_MASK; + ehc->i.action |= ATA_EH_REVALIDATE; + } + + return rc; +} + +static int ata_eh_revalidate(struct ata_port *ap, + struct ata_device **r_failed_dev) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ehc->i.action & ATA_EH_REVALIDATE && ata_dev_enabled(dev) && + (!ehc->i.dev || ehc->i.dev == dev)) { + if (ata_port_offline(ap)) { + rc = -EIO; + break; + } + + ata_eh_about_to_do(ap, ATA_EH_REVALIDATE); + rc = ata_dev_revalidate(dev, + ehc->i.flags & ATA_EHI_DID_RESET); + if (rc) + break; + + ehc->i.action &= ~ATA_EH_REVALIDATE; + } + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return rc; +} + +static int ata_port_nr_enabled(struct ata_port *ap) +{ + int i, cnt = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + cnt++; + return cnt; +} + +/** + * ata_eh_recover - recover host port after error + * @ap: host port to recover + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * This is the alpha and omega, eum and yang, heart and soul of + * libata exception handling. On entry, actions required to + * recover each devices are recorded in eh_context. This + * function executes all the operations with appropriate retrials + * and fallbacks to resurrect failed devices. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_recover(struct ata_port *ap, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev; + int down_xfermask, i, rc; + + DPRINTK("ENTER\n"); + + /* prep for recovery */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + } + + retry: + down_xfermask = 0; + rc = 0; + + /* skip EH if possible. */ + if (!ata_port_nr_enabled(ap) && !(ap->flags & ATA_FLAG_FROZEN)) + ehc->i.action = 0; + + /* reset */ + if (ehc->i.action & ATA_EH_RESET_MASK) { + ata_eh_freeze_port(ap); + + rc = ata_eh_reset(ap, softreset, hardreset, postreset); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "reset failed, giving up\n"); + goto out; + } + + ata_eh_thaw_port(ap); + } + + /* revalidate existing devices */ + rc = ata_eh_revalidate(ap, &dev); + if (rc) + goto dev_fail; + + /* configure transfer mode if the port has been reset */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto dev_fail; + } + } + + goto out; + + dev_fail: + switch (rc) { + case -ENODEV: + case -EINVAL: + ehc->tries[dev->devno] = 0; + break; + case -EIO: + sata_down_spd_limit(ap); + default: + ehc->tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) + ehc->tries[dev->devno] = 0; + } + + /* disable device if it has used up all its chances */ + if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) + ata_dev_disable(dev); + + /* soft didn't work? be haaaaard */ + if (ehc->i.flags & ATA_EHI_DID_RESET) + ehc->i.action |= ATA_EH_HARDRESET; + else + ehc->i.action |= ATA_EH_SOFTRESET; + + if (ata_port_nr_enabled(ap)) { + ata_port_printk(ap, KERN_WARNING, "failed to recover some " + "devices, retrying in 5 secs\n"); + ssleep(5); + } else { + /* no device left, repeat fast */ + msleep(500); + } + + goto retry; + + out: + if (rc) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + } + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * ata_eh_finish - finish up EH + * @ap: host port to finish EH for + * + * Recovery is complete. Clean up EH states and retry or finish + * failed qcs. + * + * LOCKING: + * None. + */ +static void ata_eh_finish(struct ata_port *ap) +{ + int tag; + + /* retry or finish qcs */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) { + /* FIXME: Once EH migration is complete, + * generate sense data in this function, + * considering both err_mask and tf. + */ + if (qc->err_mask & AC_ERR_INVALID) + ata_eh_qc_complete(qc); + else + ata_eh_qc_retry(qc); + } else { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + ata_eh_qc_complete(qc); + } else { + /* feed zero TF to sense generation */ + memset(&qc->result_tf, 0, sizeof(qc->result_tf)); + ata_eh_qc_retry(qc); + } + } + } +} + +/** + * ata_do_eh - do standard error handling + * @ap: host port to handle error for + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Perform standard error handling sequence. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + ata_eh_autopsy(ap); + ata_eh_report(ap); + ata_eh_recover(ap, softreset, hardreset, postreset); + ata_eh_finish(ap); +} diff --git a/include/linux/libata.h b/include/linux/libata.h index 298f9918e375..9fe46073cf8c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -247,6 +247,8 @@ enum { /* how hard are we gonna try to probe/recover devices */ ATA_PROBE_MAX_TRIES = 3, + ATA_EH_RESET_TRIES = 3, + ATA_EH_DEV_TRIES = 3, }; enum hsm_task_states { @@ -727,6 +729,9 @@ extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); +extern void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); + /* * printk helpers */ From 6d97dbd72da31a0e334f251fa9df4be9fab6fde2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:24 +0900 Subject: [PATCH 153/258] [PATCH] libata-eh: implement BMDMA EH Implement stock BMDMA error handling methods. Signed-off-by: Tejun Heo --- drivers/scsi/libata-bmdma.c | 144 ++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-core.c | 5 ++ include/linux/libata.h | 8 ++ 3 files changed, 157 insertions(+) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 835dff0bafdc..49eff18a67e3 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -652,6 +652,150 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) ata_altstatus(ap); /* dummy read */ } +/** + * ata_bmdma_freeze - Freeze BMDMA controller port + * @ap: port to freeze + * + * Freeze BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_freeze(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); +} + +/** + * ata_bmdma_thaw - Thaw BMDMA controller port + * @ap: port to thaw + * + * Thaw BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_thaw(struct ata_port *ap) +{ + /* clear & re-enable interrupts */ + ata_chk_status(ap); + ap->ops->irq_clear(ap); + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); +} + +/** + * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller + * @ap: port to handle error for + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Handle error for ATA BMDMA controller. It can handle both + * PATA and SATA controllers. Many controllers should be able to + * use this EH as-is or with some added handling before and + * after. + * + * This function is intended to be used for constructing + * ->error_handler callback by low level drivers. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_host_set *host_set = ap->host_set; + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_queued_cmd *qc; + unsigned long flags; + int thaw = 0; + + qc = __ata_qc_from_tag(ap, ap->active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(&host_set->lock, flags); + + ap->flags &= ~ATA_FLAG_NOINTR; + ap->hsm_task_state = HSM_ST_IDLE; + + if (qc && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { + u8 host_stat; + + host_stat = ata_bmdma_status(ap); + + ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = 1; + } + + ap->ops->bmdma_stop(qc); + } + + ata_altstatus(ap); + ata_chk_status(ap); + ap->ops->irq_clear(ap); + + spin_unlock_irqrestore(&host_set->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + /* PIO and DMA engines have been stopped, perform recovery */ + ata_do_eh(ap, softreset, hardreset, postreset); +} + +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (sata_scr_valid(ap)) + hardreset = sata_std_hardreset; + + ata_bmdma_drive_eh(ap, ata_std_softreset, hardreset, ata_std_postreset); +} + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for + * BMDMA controller + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + #ifdef CONFIG_PCI static struct ata_probe_ent * ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ddc47097d37e..2969599ec0b9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5377,6 +5377,11 @@ EXPORT_SYMBOL_GPL(ata_bmdma_start); EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); EXPORT_SYMBOL_GPL(ata_bmdma_status); EXPORT_SYMBOL_GPL(ata_bmdma_stop); +EXPORT_SYMBOL_GPL(ata_bmdma_freeze); +EXPORT_SYMBOL_GPL(ata_bmdma_thaw); +EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_phy_reset); diff --git a/include/linux/libata.h b/include/linux/libata.h index 9fe46073cf8c..6ccacbf889e3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -661,6 +661,14 @@ extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); +extern void ata_bmdma_freeze(struct ata_port *ap); +extern void ata_bmdma_thaw(struct ata_port *ap); +extern void ata_bmdma_drive_eh(struct ata_port *ap, + ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset); +extern void ata_bmdma_error_handler(struct ata_port *ap); +extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); From 3f037db0ba043022e43e8e7266e698d4af264851 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:25 +0900 Subject: [PATCH 154/258] [PATCH] ata_piix: convert to new EH ata_piix can use stock BMDMA EH routines. Convert to new EH. Signed-off-by: Tejun Heo --- drivers/scsi/ata_piix.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index af1d46e36107..e3184a77a600 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -243,7 +243,10 @@ static const struct ata_port_operations piix_pata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -271,7 +274,10 @@ static const struct ata_port_operations piix_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, From f6aae27ed002ba9c0a98aff811dbde32ce749d28 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:27 +0900 Subject: [PATCH 155/258] [PATCH] sata_sil: convert to new EH Convert sata_sil to new EH. As these controllers have hardware interrupt mask and are known to have screaming interrupts issues, use hardware IRQ masking for freezing. sil_freeze() masks interrupts for the port and sil_thaw() unmasks them. As ports are automatically frozen before probing reset, there is no need to initialize interrupt masks sil_init_onde(). Remove related code. Other than freezing, sata_sil uses stock BMDMA EH routines. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil.c | 49 ++++++++++++++++++++++++++++------------- 1 file changed, 34 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index bfcece18a7cb..aa63044eed2e 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -96,6 +96,8 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); +static void sil_freeze(struct ata_port *ap); +static void sil_thaw(struct ata_port *ap); static const struct pci_device_id sil_pci_tbl[] = { @@ -174,7 +176,10 @@ static const struct ata_port_operations sil_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .freeze = sil_freeze, + .thaw = sil_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = sil_scr_read, @@ -314,6 +319,33 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) writel(val, mmio); } +static void sil_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* plug IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp |= SIL_MASK_IDE0_INT << ap->port_no; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ +} + +static void sil_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* clear IRQ */ + ata_chk_status(ap); + ata_bmdma_irq_clear(ap); + + /* turn on IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); + writel(tmp, mmio_base + SIL_SYSCFG); +} + /** * sil_dev_config - Apply device/host-specific errata fixups * @ap: Port containing device to be examined @@ -384,7 +416,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) int rc; unsigned int i; int pci_dev_busy = 0; - u32 tmp, irq_mask; + u32 tmp; u8 cls; if (!printed_version++) @@ -474,24 +506,11 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } if (ent->driver_data == sil_3114) { - irq_mask = SIL_MASK_4PORT; - /* flip the magic "make 4 ports work" bit */ tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) writel(tmp | SIL_INTR_STEERING, mmio_base + sil_port[2].bmdma); - - } else { - irq_mask = SIL_MASK_2PORT; - } - - /* make sure IDE0/1/2/3 interrupts are not masked */ - tmp = readl(mmio_base + SIL_SYSCFG); - if (tmp & irq_mask) { - tmp &= ~irq_mask; - writel(tmp, mmio_base + SIL_SYSCFG); - readl(mmio_base + SIL_SYSCFG); /* flush */ } /* mask all SATA phy-related interrupts */ From 78cd52d02fa0735949a9fa30a6b79bf02c94c250 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:29 +0900 Subject: [PATCH 156/258] [PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 239 +++++++++++++++++++++++++------------------- 1 file changed, 138 insertions(+), 101 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index a4fb8d0a6c08..d6894bd67980 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -71,6 +71,7 @@ enum { AHCI_CMD_CLR_BUSY = (1 << 10), RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ board_ahci = 0, board_ahci_vt8251 = 1, @@ -128,15 +129,16 @@ enum { PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ - PORT_IRQ_FATAL = PORT_IRQ_TF_ERR | - PORT_IRQ_HBUS_ERR | - PORT_IRQ_HBUS_DATA_ERR | - PORT_IRQ_IF_ERR, - DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY | - PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE | - PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS | - PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS | - PORT_IRQ_D2H_REG_FIS, + PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | + PORT_IRQ_IF_ERR | + PORT_IRQ_CONNECT | + PORT_IRQ_UNK_FIS, + PORT_IRQ_ERROR = PORT_IRQ_FREEZE | + PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_DATA_ERR, + DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, /* PORT_CMD bits */ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ @@ -197,13 +199,15 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes); static void ahci_irq_clear(struct ata_port *ap); -static void ahci_eng_timeout(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); -static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +static void ahci_freeze(struct ata_port *ap); +static void ahci_thaw(struct ata_port *ap); +static void ahci_error_handler(struct ata_port *ap); +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); static void ahci_remove_one (struct pci_dev *pdev); static struct scsi_host_template ahci_sht = { @@ -237,14 +241,18 @@ static const struct ata_port_operations ahci_ops = { .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, - .eng_timeout = ahci_eng_timeout, - .irq_handler = ahci_interrupt, .irq_clear = ahci_irq_clear, .scr_read = ahci_scr_read, .scr_write = ahci_scr_write, + .freeze = ahci_freeze, + .thaw = ahci_thaw, + + .error_handler = ahci_error_handler, + .post_internal_cmd = ahci_post_internal_cmd, + .port_start = ahci_port_start, .port_stop = ahci_port_stop, }; @@ -789,108 +797,97 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) ahci_fill_cmd_slot(pp, opts); } -static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) +static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) { - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; + struct ahci_port_priv *pp = ap->private_data; + struct ata_eh_info *ehi = &ap->eh_info; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 serror; - if ((ap->device[0].class != ATA_DEV_ATAPI) || - ((irq_stat & PORT_IRQ_TF_ERR) == 0)) - ata_port_printk(ap, KERN_WARNING, "port reset, " - "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", - irq_stat, - readl(mmio + HOST_IRQ_STAT), - readl(port_mmio + PORT_IRQ_STAT), - readl(port_mmio + PORT_CMD), - readl(port_mmio + PORT_TFDATA), - readl(port_mmio + PORT_SCR_STAT), - readl(port_mmio + PORT_SCR_ERR)); + ata_ehi_clear_desc(ehi); - /* stop DMA */ - ahci_stop_engine(ap); + /* AHCI needs SError cleared; otherwise, it might lock up */ + serror = ahci_scr_read(ap, SCR_ERROR); + ahci_scr_write(ap, SCR_ERROR, serror); - /* clear SATA phy error, if any */ - tmp = readl(port_mmio + PORT_SCR_ERR); - writel(tmp, port_mmio + PORT_SCR_ERR); + /* analyze @irq_stat */ + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - /* if DRQ/BSY is set, device needs to be reset. - * if so, issue COMRESET - */ - tmp = readl(port_mmio + PORT_TFDATA); - if (tmp & (ATA_BUSY | ATA_DRQ)) { - writel(0x301, port_mmio + PORT_SCR_CTL); - readl(port_mmio + PORT_SCR_CTL); /* flush */ - udelay(10); - writel(0x300, port_mmio + PORT_SCR_CTL); - readl(port_mmio + PORT_SCR_CTL); /* flush */ + if (irq_stat & PORT_IRQ_TF_ERR) + err_mask |= AC_ERR_DEV; + + if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { + err_mask |= AC_ERR_HOST_BUS; + action |= ATA_EH_SOFTRESET; } - /* re-start DMA */ - ahci_start_engine(ap); -} + if (irq_stat & PORT_IRQ_IF_ERR) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", interface fatal error"); + } -static void ahci_eng_timeout(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - struct ata_queued_cmd *qc; - unsigned long flags; + if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? + "connection status changed" : "PHY RDY changed"); + } - ata_port_printk(ap, KERN_WARNING, "handling error/timeout\n"); + if (irq_stat & PORT_IRQ_UNK_FIS) { + u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - spin_lock_irqsave(&host_set->lock, flags); + err_mask |= AC_ERR_HSM; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x", + unk[0], unk[1], unk[2], unk[3]); + } + + /* okay, let's hand over to EH */ + ehi->serror |= serror; + ehi->action |= action; - ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); qc = ata_qc_from_tag(ap, ap->active_tag); - qc->err_mask |= AC_ERR_TIMEOUT; + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; - spin_unlock_irqrestore(&host_set->lock, flags); - - ata_eh_qc_complete(qc); + if (irq_stat & PORT_IRQ_FREEZE) + ata_port_freeze(ap); + else + ata_port_abort(ap); } -static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +static void ahci_host_intr(struct ata_port *ap) { void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 status, serr, ci; - - serr = readl(port_mmio + PORT_SCR_ERR); - writel(serr, port_mmio + PORT_SCR_ERR); + struct ata_queued_cmd *qc; + u32 status, ci; status = readl(port_mmio + PORT_IRQ_STAT); writel(status, port_mmio + PORT_IRQ_STAT); - ci = readl(port_mmio + PORT_CMD_ISSUE); - if (likely((ci & 0x1) == 0)) { - if (qc) { - WARN_ON(qc->err_mask); + if (unlikely(status & PORT_IRQ_ERROR)) { + ahci_error_intr(ap, status); + return; + } + + if ((qc = ata_qc_from_tag(ap, ap->active_tag))) { + ci = readl(port_mmio + PORT_CMD_ISSUE); + if ((ci & 0x1) == 0) { ata_qc_complete(qc); - qc = NULL; + return; } } - if (status & PORT_IRQ_FATAL) { - unsigned int err_mask; - if (status & PORT_IRQ_TF_ERR) - err_mask = AC_ERR_DEV; - else if (status & PORT_IRQ_IF_ERR) - err_mask = AC_ERR_ATA_BUS; - else - err_mask = AC_ERR_HOST_BUS; - - /* command processing has stopped due to error; restart */ - ahci_restart_port(ap, status); - - if (qc) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); - } - } - - return 1; + /* spurious interrupt */ + if (ata_ratelimit()) + ata_port_printk(ap, KERN_INFO, "spurious interrupt " + "(irq_stat 0x%x active_tag %d)\n", + status, ap->active_tag); } static void ahci_irq_clear(struct ata_port *ap) @@ -927,14 +924,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * ap = host_set->ports[i]; if (ap) { - struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (!ahci_host_intr(ap, qc)) - if (ata_ratelimit()) - dev_printk(KERN_WARNING, host_set->dev, - "unhandled interrupt on port %u\n", - i); - + ahci_host_intr(ap); VPRINTK("port %u\n", i); } else { VPRINTK("port %u (no irq)\n", i); @@ -951,7 +941,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * handled = 1; } - spin_unlock(&host_set->lock); + spin_unlock(&host_set->lock); VPRINTK("EXIT\n"); @@ -969,6 +959,56 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) return 0; } +static void ahci_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + /* turn IRQ off */ + writel(0, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + /* clear IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + writel(tmp, port_mmio + PORT_IRQ_STAT); + writel(1 << ap->id, mmio + HOST_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_error_handler(struct ata_port *ap) +{ + if (!(ap->flags & ATA_FLAG_FROZEN)) { + /* restart engine */ + ahci_stop_engine(ap); + ahci_start_engine(ap); + } + + /* perform recovery */ + ata_do_eh(ap, ahci_softreset, ahci_hardreset, ahci_postreset); +} + +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) { + /* make DMA engine forget about the failed command */ + ahci_stop_engine(ap); + ahci_start_engine(ap); + } +} + static void ahci_setup_port(struct ata_ioports *port, unsigned long base, unsigned int port_idx) { @@ -1113,9 +1153,6 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) writel(tmp, port_mmio + PORT_IRQ_STAT); writel(1 << i, mmio + HOST_IRQ_STAT); - - /* set irq mask (enables interrupts) */ - writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); } tmp = readl(mmio + HOST_CTL); From 2a3917a8bb40a2cb75b458da9c356e8557e8fbed Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:30 +0900 Subject: [PATCH 157/258] [PATCH] ahci: add PIOS interim interrupt handling During multiblock PIO, multiple PIOS interrupts are generated before qc compltion. Current code prints unnecessary message for such cases. This is exposed when new EH slows down attached device into PIO mode. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index d6894bd67980..35487e30b0ff 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -883,7 +883,18 @@ static void ahci_host_intr(struct ata_port *ap) } } - /* spurious interrupt */ + /* hmmm... a spurious interupt */ + + /* ignore interim PIO setup fis interrupts */ + if (ata_tag_valid(ap->active_tag)) { + struct ata_queued_cmd *qc = + ata_qc_from_tag(ap, ap->active_tag); + + if (qc && qc->tf.protocol == ATA_PROT_PIO && + (status & PORT_IRQ_PIOS_FIS)) + return; + } + if (ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(irq_stat 0x%x active_tag %d)\n", From 88ce7550c38f46c8697f53727a571bf838bee398 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:32 +0900 Subject: [PATCH 158/258] [PATCH] sata_sil24: convert to new EH Convert sata_sil24 to new EH. * When port is frozen, IRQ for the port is masked. * sil24_softreset() doesn't need to mangle with IRQ mask anymore. libata ensures that the port is frozen during reset. * Only turn on interrupts which are handled by interrupt handler and EH. As we don't handle SDB notify yet, turn it off. DEV_XCHG and UNK_FIS are handled by EH and thus turned on. * sil24_softreset() usually fails to recover the port after DEV_XCHG. ATA_PORT_HARDRESET is used as recovery action for DEV_XCHG. * sil24 may be invoked without any active command. e.g. DEV_XCHG irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 352 +++++++++++++++++++++----------------- 1 file changed, 199 insertions(+), 153 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index ff96724b1e38..6e7728cfaf6b 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -156,6 +156,9 @@ enum { PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ + DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS, + /* bits[27:16] are unmasked (raw) */ PORT_IRQ_RAW_SHIFT = 16, PORT_IRQ_MASKED_MASK = 0x7ff, @@ -242,6 +245,58 @@ union sil24_cmd_block { struct sil24_atapi_block atapi; }; +static struct sil24_cerr_info { + unsigned int err_mask, action; + const char *desc; +} sil24_cerr_db[] = { + [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error" }, + [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error via D2H FIS" }, + [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error via SDB FIS" }, + [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, + "error in data FIS" }, + [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, + "failed to transmit command FIS" }, + [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "protocol mismatch" }, + [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "data directon mismatch" }, + [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "ran out of SGEs while writing" }, + [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "ran out of SGEs while reading" }, + [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "invalid data directon for ATAPI CDB" }, + [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, + "SGT no on qword boundary" }, + [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while fetching SGT" }, + [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while fetching SGT" }, + [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while fetching SGT" }, + [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, + "PRB not on qword boundary" }, + [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while fetching PRB" }, + [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while fetching PRB" }, + [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while fetching PRB" }, + [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "undefined error while transferring data" }, + [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while transferring data" }, + [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while transferring data" }, + [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while transferring data" }, + [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "FIS received while sending service FIS" }, +}; + /* * ap->private_data * @@ -269,8 +324,11 @@ static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes); static void sil24_qc_prep(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); -static void sil24_eng_timeout(struct ata_port *ap); static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void sil24_freeze(struct ata_port *ap); +static void sil24_thaw(struct ata_port *ap); +static void sil24_error_handler(struct ata_port *ap); +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); static void sil24_host_stop(struct ata_host_set *host_set); @@ -325,14 +383,17 @@ static const struct ata_port_operations sil24_ops = { .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, - .eng_timeout = sil24_eng_timeout, - .irq_handler = sil24_interrupt, .irq_clear = sil24_irq_clear, .scr_read = sil24_scr_read, .scr_write = sil24_scr_write, + .freeze = sil24_freeze, + .thaw = sil24_thaw, + .error_handler = sil24_error_handler, + .post_internal_cmd = sil24_post_internal_cmd, + .port_start = sil24_port_start, .port_stop = sil24_port_stop, .host_stop = sil24_host_stop, @@ -459,7 +520,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; - u32 mask, irq_enable, irq_stat; + u32 mask, irq_stat; const char *reason; DPRINTK("ENTER\n"); @@ -470,10 +531,6 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) goto out; } - /* temporarily turn off IRQs during SRST */ - irq_enable = readl(port + PORT_IRQ_ENABLE_SET); - writel(irq_enable, port + PORT_IRQ_ENABLE_CLR); - /* put the port into known state */ if (sil24_init_port(ap)) { reason ="port not ready"; @@ -494,9 +551,6 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ irq_stat >>= PORT_IRQ_RAW_SHIFT; - /* restore IRQs */ - writel(irq_enable, port + PORT_IRQ_ENABLE_SET); - if (!(irq_stat & PORT_IRQ_COMPLETE)) { if (irq_stat & PORT_IRQ_ERROR) reason = "SRST command error"; @@ -655,158 +709,134 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static int __sil24_restart_controller(void __iomem *port) +static void sil24_freeze(struct ata_port *ap) { - u32 tmp; - int cnt; - - writel(PORT_CS_INIT, port + PORT_CTRL_STAT); - - /* Max ~10ms */ - for (cnt = 0; cnt < 10000; cnt++) { - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_RDY) - return 0; - udelay(1); - } - - return -1; -} - -static void sil24_restart_controller(struct ata_port *ap) -{ - if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr)) - printk(KERN_ERR DRV_NAME - " ata%u: failed to restart controller\n", ap->id); -} - -static int __sil24_reset_controller(void __iomem *port) -{ - int cnt; - u32 tmp; - - /* Reset controller state. Is this correct? */ - writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); - readl(port + PORT_CTRL_STAT); /* sync */ - - /* Max ~100ms */ - for (cnt = 0; cnt < 1000; cnt++) { - udelay(100); - tmp = readl(port + PORT_CTRL_STAT); - if (!(tmp & PORT_CS_DEV_RST)) - break; - } - - if (tmp & PORT_CS_DEV_RST) - return -1; - - if (tmp & PORT_CS_RDY) - return 0; - - return __sil24_restart_controller(port); -} - -static void sil24_reset_controller(struct ata_port *ap) -{ - printk(KERN_NOTICE DRV_NAME - " ata%u: resetting controller...\n", ap->id); - if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr)) - printk(KERN_ERR DRV_NAME - " ata%u: failed to reset controller\n", ap->id); -} - -static void sil24_eng_timeout(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); - - sil24_reset_controller(ap); -} - -static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) -{ - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 irq_stat, cmd_err, sstatus, serror; - unsigned int err_mask; - irq_stat = readl(port + PORT_IRQ_STAT); - writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ - - if (!(irq_stat & PORT_IRQ_ERROR)) { - /* ignore non-completion, non-error irqs for now */ - printk(KERN_WARNING DRV_NAME - "ata%u: non-error exception irq (irq_stat %x)\n", - ap->id, irq_stat); - return; - } - - cmd_err = readl(port + PORT_CMD_ERR); - sstatus = readl(port + PORT_SSTATUS); - serror = readl(port + PORT_SERROR); - if (serror) - writel(serror, port + PORT_SERROR); - - /* - * Don't log ATAPI device errors. They're supposed to happen - * and any serious errors will be logged using sense data by - * the SCSI layer. + /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear + * PORT_IRQ_ENABLE instead. */ - if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB) - printk("ata%u: error interrupt on port%d\n" - " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", - ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); +} - if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { - /* - * Device is reporting error, tf registers are valid. +static void sil24_thaw(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 tmp; + + /* clear IRQ */ + tmp = readl(port + PORT_IRQ_STAT); + writel(tmp, port + PORT_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); +} + +static void sil24_error_intr(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct ata_eh_info *ehi = &ap->eh_info; + int freeze = 0; + u32 irq_stat; + + /* on error, we need to clear IRQ explicitly */ + irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); + + /* first, analyze and record host port events */ + ata_ehi_clear_desc(ehi); + + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + + if (irq_stat & PORT_IRQ_DEV_XCHG) { + ehi->err_mask |= AC_ERR_ATA_BUS; + /* sil24 doesn't recover very well from phy + * disconnection with a softreset. Force hardreset. */ - sil24_update_tf(ap); - err_mask = ac_err_mask(pp->tf.command); - sil24_restart_controller(ap); - } else { - /* - * Other errors. libata currently doesn't have any - * mechanism to report these errors. Just turn on - * ATA_ERR. - */ - err_mask = AC_ERR_OTHER; - sil24_reset_controller(ap); + ehi->action |= ATA_EH_HARDRESET; + ata_ehi_push_desc(ehi, ", device_exchanged"); + freeze = 1; } - if (qc) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); + if (irq_stat & PORT_IRQ_UNK_FIS) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi , ", unknown FIS"); + freeze = 1; } + + /* deal with command error */ + if (irq_stat & PORT_IRQ_ERROR) { + struct sil24_cerr_info *ci = NULL; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 cerr; + + /* analyze CMD_ERR */ + cerr = readl(port + PORT_CMD_ERR); + if (cerr < ARRAY_SIZE(sil24_cerr_db)) + ci = &sil24_cerr_db[cerr]; + + if (ci && ci->desc) { + err_mask |= ci->err_mask; + action |= ci->action; + ata_ehi_push_desc(ehi, ", %s", ci->desc); + } else { + err_mask |= AC_ERR_OTHER; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", unknown command error %d", + cerr); + } + + /* record error info */ + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + int tag = qc->tag; + if (unlikely(ata_tag_internal(tag))) + tag = 0; + sil24_update_tf(ap); + qc->err_mask |= err_mask; + } else + ehi->err_mask |= err_mask; + + ehi->action |= action; + } + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); } static inline void sil24_host_intr(struct ata_port *ap) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct ata_queued_cmd *qc; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); - if (!(slot_stat & HOST_SSTAT_ATTN)) { - struct sil24_port_priv *pp = ap->private_data; - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { + sil24_error_intr(ap); + return; + } - if (qc) { - if (qc->flags & ATA_QCFLAG_RESULT_TF) - sil24_update_tf(ap); - qc->err_mask |= ac_err_mask(pp->tf.command); - ata_qc_complete(qc); - } - } else - sil24_error_intr(ap, slot_stat); + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + if (qc->flags & ATA_QCFLAG_RESULT_TF) + sil24_update_tf(ap); + ata_qc_complete(qc); + return; + } + + if (ata_ratelimit()) + ata_port_printk(ap, KERN_INFO, "spurious interrupt " + "(slot_stat 0x%x active_tag %d)\n", + slot_stat, ap->active_tag); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) @@ -846,6 +876,31 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * return IRQ_RETVAL(handled); } +static void sil24_error_handler(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + + if (sil24_init_port(ap)) { + ata_eh_freeze_port(ap); + ehc->i.action |= ATA_EH_HARDRESET; + } + + /* perform recovery */ + ata_do_eh(ap, sil24_softreset, sil24_hardreset, ata_std_postreset); +} + +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + /* make DMA engine forget about the failed command */ + if (qc->err_mask) + sil24_init_port(ap); +} + static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev) { const size_t cb_size = sizeof(*pp->cmd_block); @@ -1058,15 +1113,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Always use 64bit activation */ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - /* Configure interrupts */ - writel(0xffff, port + PORT_IRQ_ENABLE_CLR); - writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | - PORT_IRQ_SDB_NOTIFY, port + PORT_IRQ_ENABLE_SET); - - /* Clear interrupts */ - writel(0x0fff0fff, port + PORT_IRQ_STAT); - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - /* Clear port multiplier enable and resume bits */ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); } From c17ea20d9a689d7335e97e09354865cdd9f873e1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:59:29 +0900 Subject: [PATCH 159/258] [PATCH] libata: fix irq-pio merge * kill ata_poll_qc_complete() and implement/use ata_hsm_qc_complete() which completes qcs in new EH compliant manner from HSM * don't print error message from ata_hsm_move(). it's responsibility of EH. * kill ATA_FLAG_NOINTR usage in bmdma EH Signed-off-by: Tejun Heo --- drivers/scsi/libata-bmdma.c | 1 - drivers/scsi/libata-core.c | 98 ++++++++++++++++++++----------------- 2 files changed, 52 insertions(+), 47 deletions(-) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 49eff18a67e3..6d30d2c52960 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -726,7 +726,6 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset, /* reset PIO HSM and stop DMA engine */ spin_lock_irqsave(&host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; ap->hsm_task_state = HSM_ST_IDLE; if (qc && (qc->tf.protocol == ATA_PROT_DMA || diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c859b96b891a..487b8f22981f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3461,40 +3461,6 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) return 0; } -/** - * ata_poll_qc_complete - turn irq back on and finish qc - * @qc: Command to complete - * @err_mask: ATA status register content - * - * LOCKING: - * None. (grabs host lock) - */ -void ata_poll_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (ap->ops->error_handler) { - /* EH might have kicked in while host_set lock is released */ - qc = ata_qc_from_tag(ap, qc->tag); - if (qc) { - if (!(qc->err_mask & AC_ERR_HSM)) { - ata_irq_on(ap); - ata_qc_complete(qc); - } else - ata_port_freeze(ap); - } - } else { - /* old EH */ - ata_irq_on(ap); - ata_qc_complete(qc); - } - - spin_unlock_irqrestore(&ap->host_set->lock, flags); -} - /** * swap_buf_le16 - swap halves of 16-bit words in place * @buf: Buffer to swap @@ -3917,6 +3883,56 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q return 0; } +/** + * ata_hsm_qc_complete - finish a qc running on standard HSM + * @qc: Command to complete + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * Finish @qc which is running on standard HSM. + * + * LOCKING: + * If @in_wq is zero, spin_lock_irqsave(host_set lock). + * Otherwise, none on entry and grabs host lock. + */ +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ap->ops->error_handler) { + if (in_wq) { + spin_lock_irqsave(&ap->host_set->lock, flags); + + /* EH might have kicked in while host_set lock + * is released. + */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (likely(!(qc->err_mask & AC_ERR_HSM))) { + ata_irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + if (likely(!(qc->err_mask & AC_ERR_HSM))) + ata_qc_complete(qc); + else + ata_port_freeze(ap); + } + } else { + if (in_wq) { + spin_lock_irqsave(&ap->host_set->lock, flags); + ata_irq_on(ap); + ata_qc_complete(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else + ata_qc_complete(qc); + } +} + /** * ata_hsm_move - move the HSM to the next state. * @ap: the target ata_port @@ -4108,19 +4124,12 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ - if (in_wq) - ata_poll_qc_complete(qc); - else - ata_qc_complete(qc); + ata_hsm_qc_complete(qc, in_wq); poll_next = 0; break; case HSM_ST_ERR: - if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_ERR "ata%u: dev %u command error, drv_stat 0x%x\n", - ap->id, qc->dev->devno, status); - /* make sure qc->err_mask is available to * know what's wrong and recover */ @@ -4129,10 +4138,7 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ - if (in_wq) - ata_poll_qc_complete(qc); - else - ata_qc_complete(qc); + ata_hsm_qc_complete(qc, in_wq); poll_next = 0; break; From 88e490340ea4c3a2ebc0187a4339912e2fc1a081 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:38 +0900 Subject: [PATCH 160/258] [PATCH] libata-ncq: add NCQ related ATA/libata constants and macros Add NCQ related ATA/libata constants and macros. Signed-off-by: Tejun Heo --- include/linux/ata.h | 9 +++++++++ include/linux/libata.h | 2 ++ 2 files changed, 11 insertions(+) diff --git a/include/linux/ata.h b/include/linux/ata.h index 1cbeb434af9a..c494e1c0531e 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -133,6 +133,8 @@ enum { ATA_CMD_WRITE = 0xCA, ATA_CMD_WRITE_EXT = 0x35, ATA_CMD_WRITE_FUA_EXT = 0x3D, + ATA_CMD_FPDMA_READ = 0x60, + ATA_CMD_FPDMA_WRITE = 0x61, ATA_CMD_PIO_READ = 0x20, ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, @@ -151,6 +153,10 @@ enum { ATA_CMD_INIT_DEV_PARAMS = 0x91, ATA_CMD_READ_NATIVE_MAX = 0xF8, ATA_CMD_READ_NATIVE_MAX_EXT = 0x27, + ATA_CMD_READ_LOG_EXT = 0x2f, + + /* READ_LOG_EXT pages */ + ATA_LOG_SATA_NCQ = 0x10, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, @@ -221,6 +227,7 @@ enum ata_tf_protocols { ATA_PROT_NODATA, /* no data */ ATA_PROT_PIO, /* PIO single sector */ ATA_PROT_DMA, /* DMA */ + ATA_PROT_NCQ, /* NCQ */ ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ ATA_PROT_ATAPI_NODATA, /* packet command, no data */ ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */ @@ -276,6 +283,8 @@ struct ata_taskfile { #define ata_id_has_pm(id) ((id)[82] & (1 << 3)) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) +#define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) +#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) #define ata_id_has_dword_io(id) ((id)[50] & (1 << 0)) #define ata_id_u32(id,n) \ diff --git a/include/linux/libata.h b/include/linux/libata.h index db17723e23fb..7c9e280a4829 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -125,6 +125,7 @@ enum { ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */ ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */ + ATA_DFLAG_NCQ = (1 << 3), /* device supports NCQ */ ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ @@ -150,6 +151,7 @@ enum { ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */ ATA_FLAG_PIO_POLLING = (1 << 10), /* use polling PIO if LLD * doesn't handle PIO interrupts */ + ATA_FLAG_NCQ = (1 << 11), /* host supports NCQ */ ATA_FLAG_DEBUGMSG = (1 << 14), ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* flush port task */ From 2115ea94a2d11fbd228b049e667ec2d3e91ca371 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:39 +0900 Subject: [PATCH 161/258] [PATCH] libata-ncq: pass ata_scsi_translate() return value to SCSI midlayer ata_scsi_translate() will need to return SCSI_ML_QUEUE_DEVICE_BUSY to achieve exlusion between NCQ and non-NCQ commands or among non-NCQ commands. Pass its return value upward to SCSI midlayer. Signed-off-by: Tejun Heo --- drivers/scsi/libata-scsi.c | 40 +++++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index e61cc357ae4a..96517ca021e3 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1248,11 +1248,14 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command + * needs to be deferred. */ - -static void ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - ata_xlat_func_t xlat_func) +static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; u8 *scsicmd = cmd->cmnd; @@ -1290,13 +1293,13 @@ static void ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, ata_qc_issue(qc); VPRINTK("EXIT\n"); - return; + return 0; early_finish: ata_qc_free(qc); done(cmd); DPRINTK("EXIT - early finish (good or error)\n"); - return; + return 0; err_did: ata_qc_free(qc); @@ -1304,7 +1307,7 @@ static void ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, cmd->result = (DID_ERROR << 16); done(cmd); DPRINTK("EXIT - internal\n"); - return; + return 0; } /** @@ -2456,20 +2459,24 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - struct ata_device *dev) +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + struct ata_device *dev) { + int rc = 0; + if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, cmd->cmnd[0]); if (xlat_func) - ata_scsi_translate(dev, cmd, done, xlat_func); + rc = ata_scsi_translate(dev, cmd, done, xlat_func); else ata_scsi_simulate(dev, cmd, done); } else - ata_scsi_translate(dev, cmd, done, atapi_xlat); + rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + + return rc; } /** @@ -2488,15 +2495,16 @@ static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, * Releases scsi-layer-held lock, and obtains host_set lock. * * RETURNS: - * Zero. + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. */ - int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_port *ap; struct ata_device *dev; struct scsi_device *scsidev = cmd->device; struct Scsi_Host *shost = scsidev->host; + int rc = 0; ap = ata_shost_to_port(shost); @@ -2507,7 +2515,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) dev = ata_scsi_find_dev(ap, scsidev); if (likely(dev)) - __ata_scsi_queuecmd(cmd, done, dev); + rc = __ata_scsi_queuecmd(cmd, done, dev); else { cmd->result = (DID_BAD_TARGET << 16); done(cmd); @@ -2515,7 +2523,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) spin_unlock(&ap->host_set->lock); spin_lock(shost->host_lock); - return 0; + return rc; } /** From 6cec4a3943bdfe46e2952bc246f17670f747be8d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:41 +0900 Subject: [PATCH 162/258] [PATCH] libata-ncq: rename ap->qactive to ap->qc_allocated Rename ap->qactive to ap->qc_allocated. This is to accomodate addition of ap->qc_active, mask of active qcs. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 6 +++--- include/linux/libata.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 487b8f22981f..f8401800dc1a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1006,7 +1006,7 @@ unsigned ata_exec_internal(struct ata_device *dev, else tag = 0; - if (test_and_set_bit(tag, &ap->qactive)) + if (test_and_set_bit(tag, &ap->qc_allocated)) BUG(); qc = __ata_qc_from_tag(ap, tag); @@ -4207,7 +4207,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) /* the last tag is reserved for internal command. */ for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qactive)) { + if (!test_and_set_bit(i, &ap->qc_allocated)) { qc = __ata_qc_from_tag(ap, i); break; } @@ -4264,7 +4264,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) tag = qc->tag; if (likely(ata_tag_valid(tag))) { qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qactive); + clear_bit(tag, &ap->qc_allocated); } } diff --git a/include/linux/libata.h b/include/linux/libata.h index 7c9e280a4829..b3a4f8bea828 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -474,7 +474,7 @@ struct ata_port { struct ata_device device[ATA_MAX_DEVICES]; struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; - unsigned long qactive; + unsigned long qc_allocated; unsigned int active_tag; struct ata_host_stats stats; From dedaf2b0365ccec50714fbde0b3215e7e94fa47c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:43 +0900 Subject: [PATCH 163/258] [PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 81 +++++++++++++++++++++++++++++++++++++- include/linux/libata.h | 5 +++ 2 files changed, 84 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f8401800dc1a..eea1fe9c8b79 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -981,6 +981,7 @@ unsigned ata_exec_internal(struct ata_device *dev, u8 command = tf->command; struct ata_queued_cmd *qc; unsigned int tag, preempted_tag; + u32 preempted_sactive, preempted_qc_active; DECLARE_COMPLETION(wait); unsigned long flags; unsigned int err_mask; @@ -1017,7 +1018,11 @@ unsigned ata_exec_internal(struct ata_device *dev, ata_qc_reinit(qc); preempted_tag = ap->active_tag; + preempted_sactive = ap->sactive; + preempted_qc_active = ap->qc_active; ap->active_tag = ATA_TAG_POISON; + ap->sactive = 0; + ap->qc_active = 0; /* prepare & issue qc */ qc->tf = *tf; @@ -1082,6 +1087,8 @@ unsigned ata_exec_internal(struct ata_device *dev, ata_qc_free(qc); ap->active_tag = preempted_tag; + ap->sactive = preempted_sactive; + ap->qc_active = preempted_qc_active; /* XXX - Some LLDDs (sata_mv) disable port on command failure. * Until those drivers are fixed, we detect the condition @@ -4270,6 +4277,8 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); @@ -4277,13 +4286,17 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) ata_sg_clean(qc); /* command should be marked inactive atomically with qc completion */ - qc->ap->active_tag = ATA_TAG_POISON; + if (qc->tf.protocol == ATA_PROT_NCQ) + ap->sactive &= ~(1 << qc->tag); + else + ap->active_tag = ATA_TAG_POISON; /* atapi: mark qc as inactive to prevent the interrupt handler * from completing the command twice later, before the error handler * is called. (when rc != 0 and atapi request sense is needed) */ qc->flags &= ~ATA_QCFLAG_ACTIVE; + ap->qc_active &= ~(1 << qc->tag); /* call completion callback */ qc->complete_fn(qc); @@ -4349,6 +4362,55 @@ void ata_qc_complete(struct ata_queued_cmd *qc) } } +/** + * ata_qc_complete_multiple - Complete multiple qcs successfully + * @ap: port in question + * @qc_active: new qc_active mask + * @finish_qc: LLDD callback invoked before completing a qc + * + * Complete in-flight commands. This functions is meant to be + * called from low-level driver's interrupt routine to complete + * requests normally. ap->qc_active and @qc_active is compared + * and commands are completed accordingly. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of completed commands on success, -errno otherwise. + */ +int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, + void (*finish_qc)(struct ata_queued_cmd *)) +{ + int nr_done = 0; + u32 done_mask; + int i; + + done_mask = ap->qc_active ^ qc_active; + + if (unlikely(done_mask & qc_active)) { + ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " + "(%08x->%08x)\n", ap->qc_active, qc_active); + return -EINVAL; + } + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + struct ata_queued_cmd *qc; + + if (!(done_mask & (1 << i))) + continue; + + if ((qc = ata_qc_from_tag(ap, i))) { + if (finish_qc) + finish_qc(qc); + ata_qc_complete(qc); + nr_done++; + } + } + + return nr_done; +} + static inline int ata_should_dma_map(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -4388,8 +4450,22 @@ void ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - qc->ap->active_tag = qc->tag; + /* Make sure only one non-NCQ command is outstanding. The + * check is skipped for old EH because it reuses active qc to + * request ATAPI sense. + */ + WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); + + if (qc->tf.protocol == ATA_PROT_NCQ) { + WARN_ON(ap->sactive & (1 << qc->tag)); + ap->sactive |= 1 << qc->tag; + } else { + WARN_ON(ap->sactive); + ap->active_tag = qc->tag; + } + qc->flags |= ATA_QCFLAG_ACTIVE; + ap->qc_active |= 1 << qc->tag; if (ata_should_dma_map(qc)) { if (qc->flags & ATA_QCFLAG_SG) { @@ -5549,6 +5625,7 @@ EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); EXPORT_SYMBOL_GPL(ata_tf_load); EXPORT_SYMBOL_GPL(ata_tf_read); diff --git a/include/linux/libata.h b/include/linux/libata.h index b3a4f8bea828..dd0db2d21bc5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -475,7 +475,10 @@ struct ata_port { struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; unsigned long qc_allocated; + unsigned int qc_active; + unsigned int active_tag; + u32 sactive; struct ata_host_stats stats; struct ata_host_set *host_set; @@ -668,6 +671,8 @@ extern void ata_bmdma_drive_eh(struct ata_port *ap, extern void ata_bmdma_error_handler(struct ata_port *ap); extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc); extern void ata_qc_complete(struct ata_queued_cmd *qc); +extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, + void (*finish_qc)(struct ata_queued_cmd *)); extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_std_bios_param(struct scsi_device *sdev, From 3dc1d88193b9c65b01b64fb2dc730e486306649f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:45 +0900 Subject: [PATCH 164/258] [PATCH] libata-ncq: implement NCQ command translation and exclusion This patch implements NCQ command translation and exclusion. Note that NCQ commands don't use ata_rwcmd_protocol() to choose ATA command. This is because, unlike non-NCQ RW commands, NCQ commands can only be used for NCQ protocol and FUA handling is done with a flag rather than separate command. NCQ enabled device will have queue depth larger than one but no two non-NCQ commands can be issued simultaneously, neither can a non-NCQ command and NCQ commands. This patch makes ata_scsi_translate() return SCSI_MLQUEUE_DEVICE_BUSY if such exclusion is necessary. SCSI midlayer will retry the command later. As SCSI midlayer always retries once a command completes, this doesn't incur unnecessary delays and as most commands will be NCQ ones for NCQ device, so the overhead should be negligible. Initial implementation is from Jens Axboe and using SCSI_MLQUEUE_DEVICE_BUSY for exclusion is suggested by Jeff Garzik. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-scsi.c | 72 +++++++++++++++++++++++++++++++++++++- 2 files changed, 72 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index eea1fe9c8b79..14ffb5264b65 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4416,6 +4416,7 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; switch (qc->tf.protocol) { + case ATA_PROT_NCQ: case ATA_PROT_DMA: case ATA_PROT_ATAPI_DMA: return 1; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 96517ca021e3..9bef68c7c1de 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1103,7 +1103,36 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm */ goto nothing_to_do; - if (dev->flags & ATA_DFLAG_LBA) { + if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + goto out_of_range; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + qc->nsect = n_block; + + tf->nsect = qc->tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = 1 << 6; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; if (lba_28_ok(block, n_block)) { @@ -1226,6 +1255,39 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) ata_qc_free(qc); } +/** + * ata_scmd_need_defer - Check whether we need to defer scmd + * @dev: ATA device to which the command is addressed + * @is_io: Is the command IO (and thus possibly NCQ)? + * + * NCQ and non-NCQ commands cannot run together. As upper layer + * only knows the queue depth, we are responsible for maintaining + * exclusion. This function checks whether a new command can be + * issued to @dev. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if deferring is needed, 0 otherwise. + */ +static int ata_scmd_need_defer(struct ata_device *dev, int is_io) +{ + struct ata_port *ap = dev->ap; + + if (!(dev->flags & ATA_DFLAG_NCQ)) + return 0; + + if (is_io) { + if (!ata_tag_valid(ap->active_tag)) + return 0; + } else { + if (!ata_tag_valid(ap->active_tag) && !ap->sactive) + return 0; + } + return 1; +} + /** * ata_scsi_translate - Translate then issue SCSI command to ATA device * @dev: ATA device to which the command is addressed @@ -1259,9 +1321,13 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, { struct ata_queued_cmd *qc; u8 *scsicmd = cmd->cmnd; + int is_io = xlat_func == ata_scsi_rw_xlat; VPRINTK("ENTER\n"); + if (unlikely(ata_scmd_need_defer(dev, is_io))) + goto defer; + qc = ata_scsi_qc_new(dev, cmd, done); if (!qc) goto err_mem; @@ -1308,6 +1374,10 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, done(cmd); DPRINTK("EXIT - internal\n"); return 0; + +defer: + DPRINTK("EXIT - defer\n"); + return SCSI_MLQUEUE_DEVICE_BUSY; } /** From e8ee84518c159a663c07bf691ace187527380f61 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:46 +0900 Subject: [PATCH 165/258] [PATCH] libata-ncq: update EH to handle NCQ Update EH to handle NCQ. ata_eh_autopsy() is updated to call ata_eh_analyze_ncq_error() which reads log page 10h on NCQ device error and updates eh_context accordingly. ata_eh_report() is updated to report SActive. Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 171 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 163 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index e401f353f848..7244caff13a0 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -684,6 +684,98 @@ static const char * ata_err_string(unsigned int err_mask) return "unknown error"; } +/** + * ata_read_log_page - read a specific log page + * @dev: target device + * @page: page to read + * @buf: buffer to store read page + * @sectors: number of sectors to read + * + * Read log page using READ_LOG_EXT command. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_read_log_page(struct ata_device *dev, + u8 page, void *buf, unsigned int sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + DPRINTK("read log page - page %d\n", page); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_READ_LOG_EXT; + tf.lbal = page; + tf.nsect = sectors; + tf.hob_nsect = sectors >> 8; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_PIO; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + buf, sectors * ATA_SECT_SIZE); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_eh_read_log_10h - Read log page 10h for NCQ error details + * @dev: Device to read log page 10h from + * @tag: Resulting tag of the failed command + * @tf: Resulting taskfile registers of the failed command + * + * Read log page 10h to obtain NCQ error details and clear error + * condition. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int ata_eh_read_log_10h(struct ata_device *dev, + int *tag, struct ata_taskfile *tf) +{ + u8 *buf = dev->ap->sector_buf; + unsigned int err_mask; + u8 csum; + int i; + + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); + if (err_mask) + return -EIO; + + csum = 0; + for (i = 0; i < ATA_SECT_SIZE; i++) + csum += buf[i]; + if (csum) + ata_dev_printk(dev, KERN_WARNING, + "invalid checksum 0x%x on log page 10h\n", csum); + + if (buf[0] & 0x80) + return -ENOENT; + + *tag = buf[0] & 0x1f; + + tf->command = buf[2]; + tf->feature = buf[3]; + tf->lbal = buf[4]; + tf->lbam = buf[5]; + tf->lbah = buf[6]; + tf->device = buf[7]; + tf->hob_lbal = buf[8]; + tf->hob_lbam = buf[9]; + tf->hob_lbah = buf[10]; + tf->nsect = buf[12]; + tf->hob_nsect = buf[13]; + + return 0; +} + /** * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE * @dev: device to perform REQUEST_SENSE to @@ -782,6 +874,66 @@ static void ata_eh_analyze_serror(struct ata_port *ap) ehc->i.action |= action; } +/** + * ata_eh_analyze_ncq_error - analyze NCQ error + * @ap: ATA port to analyze NCQ error for + * + * Read log page 10h, determine the offending qc and acquire + * error status TF. For NCQ device errors, all LLDDs have to do + * is setting AC_ERR_DEV in ehi->err_mask. This function takes + * care of the rest. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_analyze_ncq_error(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev = ap->device; + struct ata_queued_cmd *qc; + struct ata_taskfile tf; + int tag, rc; + + /* if frozen, we can't do much */ + if (ap->flags & ATA_FLAG_FROZEN) + return; + + /* is it NCQ device error? */ + if (!ap->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) + return; + + /* has LLDD analyzed already? */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) + return; + } + + /* okay, this error is ours */ + rc = ata_eh_read_log_10h(dev, &tag, &tf); + if (rc) { + ata_port_printk(ap, KERN_ERR, "failed to read log page 10h " + "(errno=%d)\n", rc); + return; + } + + if (!(ap->sactive & (1 << tag))) { + ata_port_printk(ap, KERN_ERR, "log page 10h reported " + "inactive tag %d\n", tag); + return; + } + + /* we've got the perpetrator, condemn it */ + qc = __ata_qc_from_tag(ap, tag); + memcpy(&qc->result_tf, &tf, sizeof(tf)); + qc->err_mask |= AC_ERR_DEV; + ehc->i.err_mask &= ~AC_ERR_DEV; +} + /** * ata_eh_analyze_tf - analyze taskfile of a failed qc * @qc: qc to analyze @@ -999,6 +1151,9 @@ static void ata_eh_autopsy(struct ata_port *ap) } else if (rc != -EOPNOTSUPP) action |= ATA_EH_HARDRESET; + /* analyze NCQ failure */ + ata_eh_analyze_ncq_error(ap); + /* any real error trumps AC_ERR_OTHER */ if (ehc->i.err_mask & ~AC_ERR_OTHER) ehc->i.err_mask &= ~AC_ERR_OTHER; @@ -1093,17 +1248,17 @@ static void ata_eh_report(struct ata_port *ap) frozen = " frozen"; if (ehc->i.dev) { - ata_dev_printk(ehc->i.dev, KERN_ERR, - "exception Emask 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ehc->i.serror, ehc->i.action, - frozen); + ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ap->sactive, ehc->i.serror, + ehc->i.action, frozen); if (desc) ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc); } else { - ata_port_printk(ap, KERN_ERR, - "exception Emask 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ehc->i.serror, ehc->i.action, - frozen); + ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ap->sactive, ehc->i.serror, + ehc->i.action, frozen); if (desc) ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); } From a6e6ce8e8dc907a2cf2b994b0ea4099423f046bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:48 +0900 Subject: [PATCH 166/258] [PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 31 +++++++++++++++++++++++-- drivers/scsi/libata-scsi.c | 46 ++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 4 +++- 3 files changed, 78 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 14ffb5264b65..9051b6821c1c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1251,6 +1251,28 @@ static inline u8 ata_dev_knobble(struct ata_device *dev) return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } +static void ata_dev_config_ncq(struct ata_device *dev, + char *desc, size_t desc_sz) +{ + struct ata_port *ap = dev->ap; + int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); + + if (!ata_id_has_ncq(dev->id)) { + desc[0] = '\0'; + return; + } + + if (ap->flags & ATA_FLAG_NCQ) { + hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); + dev->flags |= ATA_DFLAG_NCQ; + } + + if (hdepth >= ddepth) + snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); + else + snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); +} + /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -1311,6 +1333,7 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) if (ata_id_has_lba(id)) { const char *lba_desc; + char ncq_desc[20]; lba_desc = "LBA"; dev->flags |= ATA_DFLAG_LBA; @@ -1319,14 +1342,17 @@ static int ata_dev_configure(struct ata_device *dev, int print_info) lba_desc = "LBA48"; } + /* config NCQ */ + ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); + /* print device info to dmesg */ if (print_info) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: %s\n", + "max %s, %Lu sectors: %s %s\n", ata_id_major_version(id), ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, - lba_desc); + lba_desc, ncq_desc); } else { /* CHS */ @@ -5675,6 +5701,7 @@ EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); +EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(sata_scr_valid); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 9bef68c7c1de..996058af1bcd 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -684,6 +685,14 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, request_queue_t *q = sdev->request_queue; blk_queue_max_hw_segments(q, q->max_hw_segments - 1); } + + if (dev->flags & ATA_DFLAG_NCQ) { + int depth; + + depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + depth = min(ATA_MAX_QUEUE - 1, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); + } } /** @@ -717,6 +726,43 @@ int ata_scsi_slave_config(struct scsi_device *sdev) return 0; /* scsi layer doesn't check return value, sigh */ } +/** + * ata_scsi_change_queue_depth - SCSI callback for queue depth config + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * This is libata standard hostt->change_queue_depth callback. + * SCSI will call into this callback when user tries to set queue + * depth via sysfs. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Newly configured queue depth. + */ +int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev; + int max_depth; + + if (queue_depth < 1) + return sdev->queue_depth; + + dev = ata_scsi_find_dev(ap, sdev); + if (!dev || !ata_dev_enabled(dev)) + return sdev->queue_depth; + + max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + max_depth = min(ATA_MAX_QUEUE - 1, max_depth); + if (queue_depth > max_depth) + queue_depth = max_depth; + + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); + return queue_depth; +} + /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile diff --git a/include/linux/libata.h b/include/linux/libata.h index dd0db2d21bc5..fcdd798bb086 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -109,7 +109,7 @@ enum { ATA_MAX_PORTS = 8, ATA_DEF_QUEUE = 1, /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ - ATA_MAX_QUEUE = 2, + ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, ATA_MAX_SECTORS = 200, /* FIXME */ ATA_MAX_BUS = 2, @@ -679,6 +679,8 @@ extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); +extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, + int queue_depth); extern struct ata_device *ata_dev_pair(struct ata_device *adev); /* From dd410ff12925fc49df3174b18e43598b2b2b621f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:50 +0900 Subject: [PATCH 167/258] [PATCH] ahci: clean up AHCI constants in preparation for NCQ * Rename CMD_TBL_HDR to CMD_TBL_HDR_SZ as it's size not offset. * Define MAX_CMDS and CMD_SZ and use them in calculation of other constants. * Define CMD_TBL_AR_SZ as product of CMD_TBL_SZ and MAX_CMDS, and use it when calculating PRIV_DMA_SZ. * CMD_SLOT_SZ is also dependent on MAX_CMDS but hasn't been changed because I didn't want to change the value used by the original code (32 commands). Later NCQ change will bump MAX_CMDS to 32 anyway and the hard coded 32 can be changed to MAX_CMDS then. * Reorder HOST_CAP_* flags. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 35487e30b0ff..b25373f530ac 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -56,12 +56,15 @@ enum { AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_USE_CLUSTERING = 0, - AHCI_CMD_SLOT_SZ = 32 * 32, + AHCI_MAX_CMDS = 1, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = 32 * AHCI_CMD_SZ, AHCI_RX_FIS_SZ = 256, - AHCI_CMD_TBL_HDR = 0x80, AHCI_CMD_TBL_CDB = 0x40, - AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16), - AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ + + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ, AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), @@ -89,8 +92,8 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -398,7 +401,7 @@ static int ahci_port_start(struct ata_port *ap) pp->cmd_tbl = mem; pp->cmd_tbl_dma = mem_dma; - pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR; + pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR_SZ; ap->private_data = pp; From 979db803b8fd120d4ed5216520e9d1815e18bc38 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:52 +0900 Subject: [PATCH 168/258] [PATCH] ahci: add HOST_CAP_NCQ constant Add HOST_CAP_NCQ. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index b25373f530ac..740e7d86d5f8 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -93,6 +93,7 @@ enum { /* HOST_CAP bits */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ /* registers for each SATA port */ From a9764c2bb5b6d3c9df91f2977a2a640f55de0dc2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:53 +0900 Subject: [PATCH 169/258] [PATCH] ahci: kill pp->cmd_tbl_sg With NCQ, there are multiple sg tables, so pp->cmd_tbl_sg doesn't cut it. Directly calculate sg table address from pp->cmd_tbl. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 740e7d86d5f8..9f974dbcd7ed 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -191,7 +191,6 @@ struct ahci_port_priv { dma_addr_t cmd_slot_dma; void *cmd_tbl; dma_addr_t cmd_tbl_dma; - struct ahci_sg *cmd_tbl_sg; void *rx_fis; dma_addr_t rx_fis_dma; }; @@ -402,8 +401,6 @@ static int ahci_port_start(struct ata_port *ap) pp->cmd_tbl = mem; pp->cmd_tbl_dma = mem_dma; - pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR_SZ; - ap->private_data = pp; if (hpriv->cap & HOST_CAP_64) @@ -749,7 +746,7 @@ static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc) /* * Next, the S/G list. */ - ahci_sg = pp->cmd_tbl_sg; + ahci_sg = pp->cmd_tbl + AHCI_CMD_TBL_HDR_SZ; ata_for_each_sg(sg, qc) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); From 12fad3f965830d71f6454f02b2af002a64cec4d3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:55 +0900 Subject: [PATCH 170/258] [PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 89 +++++++++++++++++++++++++++++---------------- 1 file changed, 58 insertions(+), 31 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 9f974dbcd7ed..45fd71d80128 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -56,9 +56,9 @@ enum { AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_USE_CLUSTERING = 0, - AHCI_MAX_CMDS = 1, + AHCI_MAX_CMDS = 32, AHCI_CMD_SZ = 32, - AHCI_CMD_SLOT_SZ = 32 * AHCI_CMD_SZ, + AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, AHCI_RX_FIS_SZ = 256, AHCI_CMD_TBL_CDB = 0x40, AHCI_CMD_TBL_HDR_SZ = 0x80, @@ -218,7 +218,8 @@ static struct scsi_host_template ahci_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = AHCI_MAX_CMDS - 1, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = AHCI_MAX_SG, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, @@ -533,12 +534,17 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts) { - pp->cmd_slot[0].opts = cpu_to_le32(opts); - pp->cmd_slot[0].status = 0; - pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); + dma_addr_t cmd_tbl_dma; + + cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; + + pp->cmd_slot[tag].opts = cpu_to_le32(opts); + pp->cmd_slot[tag].status = 0; + pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); } static int ahci_clo(struct ata_port *ap) @@ -610,7 +616,8 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) fis = pp->cmd_tbl; /* issue the first D2H Register FIS */ - ahci_fill_cmd_slot(pp, cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); + ahci_fill_cmd_slot(pp, 0, + cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); tf.ctl |= ATA_SRST; ata_tf_to_fis(&tf, fis, 0); @@ -629,7 +636,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) msleep(1); /* issue the second D2H Register FIS */ - ahci_fill_cmd_slot(pp, cmd_fis_len); + ahci_fill_cmd_slot(pp, 0, cmd_fis_len); tf.ctl &= ~ATA_SRST; ata_tf_to_fis(&tf, fis, 0); @@ -734,9 +741,8 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) ata_tf_from_fis(d2h_fis, tf); } -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc) +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) { - struct ahci_port_priv *pp = qc->ap->private_data; struct scatterlist *sg; struct ahci_sg *ahci_sg; unsigned int n_sg = 0; @@ -746,7 +752,7 @@ static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc) /* * Next, the S/G list. */ - ahci_sg = pp->cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; ata_for_each_sg(sg, qc) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); @@ -767,6 +773,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct ahci_port_priv *pp = ap->private_data; int is_atapi = is_atapi_taskfile(&qc->tf); + void *cmd_tbl; u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ unsigned int n_elem; @@ -775,16 +782,17 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) * Fill in command table information. First, the header, * a SATA Register - Host to Device command FIS. */ - ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, cmd_tbl, 0); if (is_atapi) { - memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, - qc->dev->cdb_len); + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); } n_elem = 0; if (qc->flags & ATA_QCFLAG_DMAMAP) - n_elem = ahci_fill_sg(qc); + n_elem = ahci_fill_sg(qc, cmd_tbl); /* * Fill in command slot information. @@ -795,7 +803,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) if (is_atapi) opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - ahci_fill_cmd_slot(pp, opts); + ahci_fill_cmd_slot(pp, qc->tag, opts); } static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) @@ -865,8 +873,9 @@ static void ahci_host_intr(struct ata_port *ap) { void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - struct ata_queued_cmd *qc; - u32 status, ci; + struct ata_eh_info *ehi = &ap->eh_info; + u32 status, qc_active; + int rc; status = readl(port_mmio + PORT_IRQ_STAT); writel(status, port_mmio + PORT_IRQ_STAT); @@ -876,16 +885,27 @@ static void ahci_host_intr(struct ata_port *ap) return; } - if ((qc = ata_qc_from_tag(ap, ap->active_tag))) { - ci = readl(port_mmio + PORT_CMD_ISSUE); - if ((ci & 0x1) == 0) { - ata_qc_complete(qc); - return; - } + if (ap->sactive) + qc_active = readl(port_mmio + PORT_SCR_ACT); + else + qc_active = readl(port_mmio + PORT_CMD_ISSUE); + + rc = ata_qc_complete_multiple(ap, qc_active, NULL); + if (rc > 0) + return; + if (rc < 0) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); + return; } /* hmmm... a spurious interupt */ + /* some devices send D2H reg with I bit set during NCQ command phase */ + if (ap->sactive && status & PORT_IRQ_D2H_REG_FIS) + return; + /* ignore interim PIO setup fis interrupts */ if (ata_tag_valid(ap->active_tag)) { struct ata_queued_cmd *qc = @@ -898,8 +918,8 @@ static void ahci_host_intr(struct ata_port *ap) if (ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " - "(irq_stat 0x%x active_tag %d)\n", - status, ap->active_tag); + "(irq_stat 0x%x active_tag %d sactive 0x%x)\n", + status, ap->active_tag, ap->sactive); } static void ahci_irq_clear(struct ata_port *ap) @@ -907,7 +927,7 @@ static void ahci_irq_clear(struct ata_port *ap) /* TODO */ } -static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; struct ahci_host_priv *hpriv; @@ -965,7 +985,9 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - writel(1, port_mmio + PORT_CMD_ISSUE); + if (qc->tf.protocol == ATA_PROT_NCQ) + writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); /* flush */ return 0; @@ -1262,6 +1284,8 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) VPRINTK("ENTER\n"); + WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); + if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -1329,6 +1353,9 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_hpriv; + if (hpriv->cap & HOST_CAP_NCQ) + probe_ent->host_flags |= ATA_FLAG_NCQ; + ahci_print_info(probe_ent); /* FIXME: check ata_device_add return value */ From aee10a03eb3e240bfd1a6f91e06ce82df47c5c58 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:56 +0900 Subject: [PATCH 171/258] [PATCH] sata_sil24: implement NCQ support Implement NCQ support. Sil24 has 31 command slots and all of them are used for NCQ command queueing. libata guarantees that no other command is in progress when it issues an internal command, so always use tag 0 for internal commands. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 68 +++++++++++++++++++++++++++------------ 1 file changed, 47 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 6e7728cfaf6b..4c76f05d9b65 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -216,6 +216,8 @@ enum { SGE_DRD = (1 << 29), /* discard data read (/dev/null) data address ignored */ + SIL24_MAX_CMDS = 31, + /* board id */ BID_SIL3124 = 0, BID_SIL3132 = 1, @@ -223,7 +225,8 @@ enum { /* host flags */ SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_NCQ, SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ IRQ_STAT_4PORTS = 0xf, @@ -355,7 +358,8 @@ static struct scsi_host_template sil24_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = SIL24_MAX_CMDS, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, @@ -437,6 +441,13 @@ static struct ata_port_info sil24_port_info[] = { }, }; +static int sil24_tag(int tag) +{ + if (unlikely(ata_tag_internal(tag))) + return 0; + return tag; +} + static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; @@ -649,14 +660,17 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct sil24_port_priv *pp = ap->private_data; - union sil24_cmd_block *cb = pp->cmd_block + qc->tag; + union sil24_cmd_block *cb; struct sil24_prb *prb; struct sil24_sge *sge; u16 ctrl = 0; + cb = &pp->cmd_block[sil24_tag(qc->tag)]; + switch (qc->tf.protocol) { case ATA_PROT_PIO: case ATA_PROT_DMA: + case ATA_PROT_NCQ: case ATA_PROT_NODATA: prb = &cb->ata.prb; sge = cb->ata.sge; @@ -694,12 +708,17 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; - dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + unsigned int tag = sil24_tag(qc->tag); + dma_addr_t paddr; + void __iomem *activate; - writel((u32)paddr, port + PORT_CMD_ACTIVATE); - writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); + paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); + activate = port + PORT_CMD_ACTIVATE + tag * 8; + + writel((u32)paddr, activate); + writel((u64)paddr >> 32, activate + 4); return 0; } @@ -791,9 +810,6 @@ static void sil24_error_intr(struct ata_port *ap) /* record error info */ qc = ata_qc_from_tag(ap, ap->active_tag); if (qc) { - int tag = qc->tag; - if (unlikely(ata_tag_internal(tag))) - tag = 0; sil24_update_tf(ap); qc->err_mask |= err_mask; } else @@ -809,11 +825,17 @@ static void sil24_error_intr(struct ata_port *ap) ata_port_abort(ap); } +static void sil24_finish_qc(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + sil24_update_tf(qc->ap); +} + static inline void sil24_host_intr(struct ata_port *ap) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct ata_queued_cmd *qc; - u32 slot_stat; + u32 slot_stat, qc_active; + int rc; slot_stat = readl(port + PORT_SLOT_STAT); @@ -825,18 +847,22 @@ static inline void sil24_host_intr(struct ata_port *ap) if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - if (qc->flags & ATA_QCFLAG_RESULT_TF) - sil24_update_tf(ap); - ata_qc_complete(qc); + qc_active = slot_stat & ~HOST_SSTAT_ATTN; + rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); + if (rc > 0) + return; + if (rc < 0) { + struct ata_eh_info *ehi = &ap->eh_info; + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); return; } if (ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " - "(slot_stat 0x%x active_tag %d)\n", - slot_stat, ap->active_tag); + "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", + slot_stat, ap->active_tag, ap->sactive); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) @@ -903,7 +929,7 @@ static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev) { - const size_t cb_size = sizeof(*pp->cmd_block); + const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS; dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); } @@ -913,7 +939,7 @@ static int sil24_port_start(struct ata_port *ap) struct device *dev = ap->host_set->dev; struct sil24_port_priv *pp; union sil24_cmd_block *cb; - size_t cb_size = sizeof(*cb); + size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; dma_addr_t cb_dma; int rc = -ENOMEM; From 3655d1d323386e001c786af10f0a3f39f438f03b Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 19 May 2006 11:43:04 +0800 Subject: [PATCH 172/258] [PATCH] libata: Fix the HSM error_mask mapping (was: Re: libata-tj and SMART) Fix the HSM error_mask mapping. Changes: - Better mapping in ac_err_mask() - In HSM_ST_FIRST ans HSM_ST state, check ATA_ERR|ATA_DF and map it to AC_ERR_DEV instead of AC_ERR_HSM. - In HSM_ST_FIRST and HSM_ST state, map DRQ=1 ERR=1 to AC_ERR_HSM. - For PIO data in and DRQ=1 ERR=1, add check after the junk data block is read. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 31 ++++++++++++++++++++++++------- include/linux/libata.h | 2 +- 2 files changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 00881226f8dd..aa38ed3e59a8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4009,9 +4009,15 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); /* check device status */ - if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { - /* Wrong status. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4025,7 +4031,7 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, if (unlikely(status & (ATA_ERR | ATA_DF))) { printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", ap->id, status); - qc->err_mask |= AC_ERR_DEV; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4067,7 +4073,9 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, if (qc->tf.protocol == ATA_PROT_ATAPI) { /* ATAPI PIO protocol */ if ((status & ATA_DRQ) == 0) { - /* no more data to transfer */ + /* No more data to transfer or device error. + * Device error will be tagged in HSM_ST_LAST. + */ ap->hsm_task_state = HSM_ST_LAST; goto fsm_start; } @@ -4081,7 +4089,7 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, if (unlikely(status & (ATA_ERR | ATA_DF))) { printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", ap->id, status); - qc->err_mask |= AC_ERR_DEV; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4096,7 +4104,13 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - qc->err_mask |= AC_ERR_HSM; + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; } @@ -4121,6 +4135,9 @@ static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, status = ata_wait_idle(ap); } + if (status & (ATA_BUSY | ATA_DRQ)) + qc->err_mask |= AC_ERR_HSM; + /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state * is changed after ata_pio_sectors(). diff --git a/include/linux/libata.h b/include/linux/libata.h index 2803ab8e9243..c51502c047a4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1062,7 +1062,7 @@ static inline int ata_try_flush_cache(const struct ata_device *dev) static inline unsigned int ac_err_mask(u8 status) { - if (status & ATA_BUSY) + if (status & (ATA_BUSY | ATA_DRQ)) return AC_ERR_HSM; if (status & (ATA_ERR | ATA_DF)) return AC_ERR_DEV; From eec4c3f317991dc85c786ffccd9c1a8620c41b18 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 18 May 2006 17:51:10 +0800 Subject: [PATCH 173/258] [PATCH] libata: use qc->result_tf for temp taskfile storage Use qc->result_tf for temp taskfile storage. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index aa38ed3e59a8..bf00d2b2e404 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3865,10 +3865,16 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) unsigned int ireason, bc_lo, bc_hi, bytes; int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - ap->ops->tf_read(ap, &qc->tf); - ireason = qc->tf.nsect; - bc_lo = qc->tf.lbam; - bc_hi = qc->tf.lbah; + /* Abuse qc->result_tf for temp storage of intermediate TF + * here to save some kernel stack usage. + * For normal completion, qc->result_tf is not relevant. For + * error, qc->result_tf is later overwritten by ata_qc_complete(). + * So, the correctness of qc->result_tf is not affected. + */ + ap->ops->tf_read(ap, &qc->result_tf); + ireason = qc->result_tf.nsect; + bc_lo = qc->result_tf.lbam; + bc_hi = qc->result_tf.lbah; bytes = (bc_hi << 8) | bc_lo; /* shall be cleared to zero, indicating xfer of data */ From a20f33ffde8ba5fb27666aa1e228a45b7e3b8dcb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 16 May 2006 12:58:24 +0900 Subject: [PATCH 174/258] [PATCH] libata: enforce default EH actions LLDDs rely on libata that certain EH actions are automatically taken on some errors. If the port is frozen or one or more qc's have failed with HSM violation or timeout, softreset is enforced (LLDD can ask for storonger EH action at will). If any other error condition exists, libata EH always revalidates. This behavior existed in earlier revisions of new EH but lost during development process. This patch restores it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 7244caff13a0..750e734d1c09 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1169,9 +1169,6 @@ static void ata_eh_autopsy(struct ata_port *ap) /* inherit upper level err_mask */ qc->err_mask |= ehc->i.err_mask; - if (qc->err_mask & AC_ERR_TIMEOUT) - action |= ATA_EH_SOFTRESET; - /* analyze TF */ action |= ata_eh_analyze_tf(qc, &qc->result_tf); @@ -1201,9 +1198,14 @@ static void ata_eh_autopsy(struct ata_port *ap) if (failed_dev) action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); - if (all_err_mask) + /* enforce default EH actions */ + if (ap->flags & ATA_FLAG_FROZEN || + all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) + action |= ATA_EH_SOFTRESET; + else if (all_err_mask) action |= ATA_EH_REVALIDATE; + /* record autopsy result */ ehc->i.dev = failed_dev; ehc->i.action = action; From f8bbfc247efb0e5fa69094614380768ce79afe17 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 19 May 2006 21:07:05 +0900 Subject: [PATCH 175/258] [PATCH] SCSI: make scsi_implement_eh() generic API for SCSI transports libata implemented a feature to schedule EH without an associated EH by manipulating shost->host_eh_scheduled in ata_scsi_schedule_eh() directly. Move this function to scsi_error.c and rename it to scsi_schedule_eh(). It is now an exported API for SCSI transports and exported via new header file drivers/scsi/scsi_transport_api.h This patch also de-export scsi_eh_wakeup() which was exported specifically for ata_scsi_schedule_eh(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 3 ++- drivers/scsi/libata-scsi.c | 24 ------------------------ drivers/scsi/scsi_error.c | 23 ++++++++++++++++++++++- drivers/scsi/scsi_priv.h | 1 + drivers/scsi/scsi_transport_api.h | 6 ++++++ include/scsi/scsi_eh.h | 1 - 6 files changed, 31 insertions(+), 27 deletions(-) create mode 100644 drivers/scsi/scsi_transport_api.h diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 750e734d1c09..71b45ad2c124 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -39,6 +39,7 @@ #include #include #include +#include "scsi_transport_api.h" #include @@ -432,7 +433,7 @@ void ata_port_schedule_eh(struct ata_port *ap) WARN_ON(!ap->ops->error_handler); ap->flags |= ATA_FLAG_EH_PENDING; - ata_schedule_scsi_eh(ap->host); + scsi_schedule_eh(ap->host); DPRINTK("port EH scheduled\n"); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index f036ae4b8afb..2007b4b6e1b4 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2745,27 +2745,3 @@ void ata_scsi_scan_host(struct ata_port *ap) scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); } } - -/** - * ata_schedule_scsi_eh - schedule EH for SCSI host - * @shost: SCSI host to invoke error handling on. - * - * Schedule SCSI EH without scmd. This is a hack. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - **/ -void ata_schedule_scsi_eh(struct Scsi_Host *shost) -{ - unsigned long flags; - - spin_lock_irqsave(shost->host_lock, flags); - - if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 || - scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) { - shost->host_eh_scheduled++; - scsi_eh_wakeup(shost); - } - - spin_unlock_irqrestore(shost->host_lock, flags); -} diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 9ca71cbefce0..346ab72ebf86 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -56,7 +56,28 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) printk("Waking error handler thread\n")); } } -EXPORT_SYMBOL_GPL(scsi_eh_wakeup); + +/** + * scsi_schedule_eh - schedule EH for SCSI host + * @shost: SCSI host to invoke error handling on. + * + * Schedule SCSI EH without scmd. + **/ +void scsi_schedule_eh(struct Scsi_Host *shost) +{ + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + + if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 || + scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) { + shost->host_eh_scheduled++; + scsi_eh_wakeup(shost); + } + + spin_unlock_irqrestore(shost->host_lock, flags); +} +EXPORT_SYMBOL_GPL(scsi_schedule_eh); /** * scsi_eh_scmd_add - add scsi cmd to error handling. diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 0b39081113be..27c48274e8cb 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -63,6 +63,7 @@ extern int scsi_delete_timer(struct scsi_cmnd *); extern void scsi_times_out(struct scsi_cmnd *cmd); extern int scsi_error_handler(void *host); extern int scsi_decide_disposition(struct scsi_cmnd *cmd); +extern void scsi_eh_wakeup(struct Scsi_Host *shost); extern int scsi_eh_scmd_add(struct scsi_cmnd *, int); /* scsi_lib.c */ diff --git a/drivers/scsi/scsi_transport_api.h b/drivers/scsi/scsi_transport_api.h new file mode 100644 index 000000000000..934f0e62bb5c --- /dev/null +++ b/drivers/scsi/scsi_transport_api.h @@ -0,0 +1,6 @@ +#ifndef _SCSI_TRANSPORT_API_H +#define _SCSI_TRANSPORT_API_H + +void scsi_schedule_eh(struct Scsi_Host *shost); + +#endif /* _SCSI_TRANSPORT_API_H */ diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h index 212c983a6a18..d160880b2a87 100644 --- a/include/scsi/scsi_eh.h +++ b/include/scsi/scsi_eh.h @@ -35,7 +35,6 @@ static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr) } -extern void scsi_eh_wakeup(struct Scsi_Host *shost); extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q); extern void scsi_eh_flush_done_q(struct list_head *done_q); From b74ba22f030eb7ab88f7d8954ad18ecc0ac5ce3c Mon Sep 17 00:00:00 2001 From: Thomas Glanzmann Date: Fri, 12 May 2006 10:00:41 +0200 Subject: [PATCH 176/258] [PATCH] Add PCI ID for the Intel IDE Controller which is in the Intel Mac Minis shipped in first quarter 2006 Signed-off-by: Thomas Glanzmann Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index e3184a77a600..28bd8cae52ce 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -159,6 +159,7 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, #endif /* NOTE: The following PCI ids must be kept in sync with the From 4c5c81613b0eb0dba97a8f312a2f1162f39fd47b Mon Sep 17 00:00:00 2001 From: Andrew Chew Date: Thu, 20 Apr 2006 15:54:26 -0700 Subject: [PATCH 177/258] [PATCH] sata_nv: Add MCP61 support Added MCP61 SATA support to sata_nv. Signed-off-by: Jeff Garzik --- drivers/ide/pci/amd74xx.c | 7 +++++-- drivers/scsi/sata_nv.c | 6 ++++++ include/linux/pci_ids.h | 4 ++++ 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index b22ee5462318..6e9dbf4d8077 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -74,6 +74,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, { 0 } }; @@ -488,7 +489,8 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), - /* 17 */ DECLARE_AMD_DEV("AMD5536"), + /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), + /* 18 */ DECLARE_AMD_DEV("AMD5536"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -525,7 +527,8 @@ static struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 }, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 70c51088d371..043ff4fd9ba7 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -140,6 +140,12 @@ static const struct pci_device_id nv_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d6fe048376ab..233f60741c82 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1182,6 +1182,10 @@ #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E #define PCI_DEVICE_ID_NVIDIA_NVENET_14 0x0372 #define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7 #define PCI_VENDOR_ID_IMS 0x10e0 #define PCI_DEVICE_ID_IMS_TT128 0x9128 From d3fb4e8dddebbf7d6c0b02842c619bfd4fa199f5 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 24 May 2006 01:43:25 -0400 Subject: [PATCH 178/258] [libata sata_promise] Add PATA cable detection. Original patch from Phillip Jordan Cleanups and fixes by me. --- drivers/scsi/sata_promise.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index bb000438cb6c..285ab0263d91 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -364,12 +364,23 @@ static void pdc_sata_phy_reset(struct ata_port *ap) sata_phy_reset(ap); } +static void pdc_pata_cbl_detect(struct ata_port *ap) +{ + u8 tmp; + void __iomem *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; + + tmp = readb(mmio); + + if (tmp & 0x01) { + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; + } else + ap->cbl = ATA_CBL_PATA80; +} + static void pdc_pata_phy_reset(struct ata_port *ap) { - /* FIXME: add cable detect. Don't assume 40-pin cable */ - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; - + pdc_pata_cbl_detect(ap); pdc_reset_port(ap); ata_port_probe(ap); ata_bus_reset(ap); From 1f3461a72619fcd70a0fcb563306c91f753b4620 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 23 May 2006 18:12:30 +0800 Subject: [PATCH 179/258] [PATCH] libata: minor fix for irq-pio merge Minor fix to put the ATA_FLAG_NO_ATAPI flag back. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_sx4.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index bfe817fc7520..eb5f8bcd03c1 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -93,7 +93,7 @@ enum { MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_POLLING), + ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING), MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, CRQB_FLAG_READ = (1 << 0), diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 70a695488291..e799ef35e9db 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -218,7 +218,7 @@ static const struct ata_port_info pdc_port_info[] = { .sht = &pdc_sata_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_POLLING, + ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ From b6079ca409bf88c248992e96510dd6f610f7ed89 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 22 May 2006 16:52:06 +0100 Subject: [PATCH 180/258] [PATCH] libata: PIO 0 Ensure the pio_mode is always setup. Don't do any setup on the controller b just ensure the mode reporting is valid to avoid tons of special cases in PATA driver code when mode switching on the fly. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e891b83be10f..45b6b29bc10f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1498,6 +1498,12 @@ static int ata_bus_probe(struct ata_port *ap) if (classes[i] == ATA_DEV_UNKNOWN) classes[i] = ATA_DEV_NONE; + /* after the reset the device state is PIO 0 and the controller + state is undefined. Record the mode */ + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].pio_mode = XFER_PIO_0; + /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; From f79d409fae879d135d1aaca6d83451f2787aec07 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 22 May 2006 16:55:11 +0100 Subject: [PATCH 181/258] [PATCH] libata - fix bracketing and DMA oops The upstream tree has the ATA_DFLAG_PIO bug fixed but does not have the pass throuugh bug fix Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 2007b4b6e1b4..3ce7c198ff0d 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1921,7 +1921,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, return 0; dpofua = 0; - if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 && + if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) dpofua = 1 << 4; @@ -2408,9 +2408,14 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &(qc->tf); struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_device *dev = qc->dev; if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; + + /* We may not issue DMA commands if no DMA mode is set */ + if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) + goto invalid_fld; if (scsicmd[1] & 0xe0) /* PIO multi not supported yet */ From 8190bdb9291758f3b8c436ec1154c9923ddb57ea Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 24 May 2006 01:53:39 -0400 Subject: [PATCH 182/258] [libata] libata-scsi, sata_mv: trim trailing whitespace --- drivers/scsi/libata-scsi.c | 2 +- drivers/scsi/sata_mv.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 3ce7c198ff0d..9e5cb9f748e6 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2412,7 +2412,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; - + /* We may not issue DMA commands if no DMA mode is set */ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) goto invalid_fld; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index eb5f8bcd03c1..691c115ac8e1 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1377,7 +1377,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* Note that DEV_IRQ might happen spuriously during EDMA, * and should be ignored in such cases. * The cause of this is still under investigation. - */ + */ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { /* EDMA: check for response queue interrupt */ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { From a6b2c5d4754dc539a560fdf0d3fb78a14174394a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 22 May 2006 16:59:59 +0100 Subject: [PATCH 183/258] [PATCH] PATCH: libata. Add ->data_xfer method We need to pass the device in order to do per device checks such as 32bit I/O enables. With the changes to include dev->ap we now don't have to add parameters however just clean them up. Also add data_xfer methods to the existing drivers except ata_piix (which is in the other block of patches). If you reject the piix one just add a data_xfer to it... Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 63 +++++++++++-------------------------- drivers/scsi/sata_mv.c | 2 ++ drivers/scsi/sata_nv.c | 1 + drivers/scsi/sata_promise.c | 2 ++ drivers/scsi/sata_qstor.c | 1 + drivers/scsi/sata_sil.c | 1 + drivers/scsi/sata_sis.c | 1 + drivers/scsi/sata_svw.c | 1 + drivers/scsi/sata_sx4.c | 1 + drivers/scsi/sata_uli.c | 1 + drivers/scsi/sata_via.c | 1 + drivers/scsi/sata_vsc.c | 1 + include/linux/libata.h | 6 ++++ 13 files changed, 37 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 45b6b29bc10f..074a46e5bbdd 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3527,7 +3527,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_mmio_data_xfer - Transfer data by MMIO - * @ap: port to read/write + * @dev: device for this I/O * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -3538,9 +3538,10 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * Inherited from caller. */ -static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, - unsigned int buflen, int write_data) +void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) { + struct ata_port *ap = adev->ap; unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; @@ -3572,7 +3573,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, /** * ata_pio_data_xfer - Transfer data by PIO - * @ap: port to read/write + * @adev: device to target * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -3583,9 +3584,10 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, * Inherited from caller. */ -static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, - unsigned int buflen, int write_data) +void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) { + struct ata_port *ap = adev->ap; unsigned int words = buflen >> 1; /* Transfer multiple of 2 bytes */ @@ -3609,39 +3611,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, } } -/** - * ata_data_xfer - Transfer data from/to the data register. - * @ap: port to read/write - * @buf: data buffer - * @buflen: buffer length - * @do_write: read/write - * - * Transfer data from/to the device data register. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, - unsigned int buflen, int do_write) -{ - /* Make the crap hardware pay the costs not the good stuff */ - if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) { - unsigned long flags; - local_irq_save(flags); - if (ap->flags & ATA_FLAG_MMIO) - ata_mmio_data_xfer(ap, buf, buflen, do_write); - else - ata_pio_data_xfer(ap, buf, buflen, do_write); - local_irq_restore(flags); - } else { - if (ap->flags & ATA_FLAG_MMIO) - ata_mmio_data_xfer(ap, buf, buflen, do_write); - else - ata_pio_data_xfer(ap, buf, buflen, do_write); - } -} - /** * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. * @qc: Command on going @@ -3676,17 +3645,18 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) if (PageHighMem(page)) { unsigned long flags; + /* FIXME: use a bounce buffer */ local_irq_save(flags); buf = kmap_atomic(page, KM_IRQ0); /* do the actual data transfer */ - ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); kunmap_atomic(buf, KM_IRQ0); local_irq_restore(flags); } else { buf = page_address(page); - ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); } qc->cursect++; @@ -3742,7 +3712,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) DPRINTK("send cdb\n"); WARN_ON(qc->dev->cdb_len < 12); - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); ata_altstatus(ap); /* flush */ switch (qc->tf.protocol) { @@ -3802,7 +3772,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) "%u bytes trailing data\n", bytes); for (i = 0; i < words; i++) - ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); + ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); ap->hsm_task_state = HSM_ST_LAST; return; @@ -3828,17 +3798,18 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) if (PageHighMem(page)) { unsigned long flags; + /* FIXME: use bounce buffer */ local_irq_save(flags); buf = kmap_atomic(page, KM_IRQ0); /* do the actual data transfer */ - ata_data_xfer(ap, buf + offset, count, do_write); + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); kunmap_atomic(buf, KM_IRQ0); local_irq_restore(flags); } else { buf = page_address(page); - ata_data_xfer(ap, buf + offset, count, do_write); + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); } bytes -= count; @@ -5702,6 +5673,8 @@ EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); +EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_noop_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 691c115ac8e1..bf3529fdea9c 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -406,6 +406,7 @@ static const struct ata_port_operations mv5_ops = { .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = mv_eng_timeout, @@ -433,6 +434,7 @@ static const struct ata_port_operations mv6_ops = { .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = mv_eng_timeout, diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 043ff4fd9ba7..d93513ef7412 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -234,6 +234,7 @@ static const struct ata_port_operations nv_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, .irq_handler = nv_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = nv_scr_read, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 285ab0263d91..01111594d09c 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -137,6 +137,7 @@ static const struct ata_port_operations pdc_sata_ops = { .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, .eng_timeout = pdc_eng_timeout, + .data_xfer = ata_mmio_data_xfer, .irq_handler = pdc_interrupt, .irq_clear = pdc_irq_clear, @@ -159,6 +160,7 @@ static const struct ata_port_operations pdc_pata_ops = { .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = pdc_eng_timeout, .irq_handler = pdc_interrupt, .irq_clear = pdc_irq_clear, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 54283e06070e..68737cadd2d4 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -156,6 +156,7 @@ static const struct ata_port_operations qs_ata_ops = { .phy_reset = qs_phy_reset, .qc_prep = qs_qc_prep, .qc_issue = qs_qc_issue, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = qs_eng_timeout, .irq_handler = qs_intr, .irq_clear = qs_irq_clear, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index aa63044eed2e..3bd807738698 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -176,6 +176,7 @@ static const struct ata_port_operations sil_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, .freeze = sil_freeze, .thaw = sil_thaw, .error_handler = ata_bmdma_error_handler, diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 3097821688dc..82a07bff7e91 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -113,6 +113,7 @@ static const struct ata_port_operations sis_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, .eng_timeout = ata_eng_timeout, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d5eb5375e265..7a4703bfa12a 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -320,6 +320,7 @@ static const struct ata_port_operations k2_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = ata_eng_timeout, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index e799ef35e9db..c4db6bf14a25 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -204,6 +204,7 @@ static const struct ata_port_operations pdc_20621_ops = { .phy_reset = pdc_20621_phy_reset, .qc_prep = pdc20621_qc_prep, .qc_issue = pdc20621_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = pdc_eng_timeout, .irq_handler = pdc20621_interrupt, .irq_clear = pdc20621_irq_clear, diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 15f81bfc30f0..7fae3e06e461 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -110,6 +110,7 @@ static const struct ata_port_operations uli_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, .eng_timeout = ata_eng_timeout, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 17aefab5f42f..1c9e2f36805a 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -124,6 +124,7 @@ static const struct ata_port_operations svia_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, .eng_timeout = ata_eng_timeout, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 0372be7ff1c9..438e7c6a0f8f 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -297,6 +297,7 @@ static const struct ata_port_operations vsc_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, .eng_timeout = ata_eng_timeout, .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, diff --git a/include/linux/libata.h b/include/linux/libata.h index c51502c047a4..25a6bf181599 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -525,6 +525,8 @@ struct ata_port_operations { void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); + void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + void (*qc_prep) (struct ata_queued_cmd *qc); unsigned int (*qc_issue) (struct ata_queued_cmd *qc); @@ -646,6 +648,10 @@ extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs); +extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); +extern void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); From e14698745dd0de1ddbf5cd0cca4313a90f8c1cc1 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 22 May 2006 19:02:03 -0400 Subject: [PATCH 184/258] [PATCH] sata_mv: endian annotations Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index bf3529fdea9c..624983c2e24b 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -272,33 +272,33 @@ enum chip_type { /* Command ReQuest Block: 32B */ struct mv_crqb { - u32 sg_addr; - u32 sg_addr_hi; - u16 ctrl_flags; - u16 ata_cmd[11]; + __le32 sg_addr; + __le32 sg_addr_hi; + __le16 ctrl_flags; + __le16 ata_cmd[11]; }; struct mv_crqb_iie { - u32 addr; - u32 addr_hi; - u32 flags; - u32 len; - u32 ata_cmd[4]; + __le32 addr; + __le32 addr_hi; + __le32 flags; + __le32 len; + __le32 ata_cmd[4]; }; /* Command ResPonse Block: 8B */ struct mv_crpb { - u16 id; - u16 flags; - u32 tmstmp; + __le16 id; + __le16 flags; + __le32 tmstmp; }; /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ struct mv_sg { - u32 addr; - u32 flags_size; - u32 addr_hi; - u32 reserved; + __le32 addr; + __le32 flags_size; + __le32 addr_hi; + __le32 reserved; }; struct mv_port_priv { @@ -1030,7 +1030,7 @@ static inline unsigned mv_inc_q_index(unsigned index) return (index + 1) & MV_MAX_Q_DEPTH_MASK; } -static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) { u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | (last ? CRQB_CMD_LAST : 0); @@ -1053,7 +1053,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; - u16 *cw; + __le16 *cw; struct ata_taskfile *tf; u16 flags = 0; unsigned in_index; From 31a34fe75906ba5f61606eaed01da313f29ca4b1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 22 May 2006 22:58:14 +0100 Subject: [PATCH 185/258] [PATCH] ata_piix formatting if( spacing fix for Garzik compliant formatting Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 28bd8cae52ce..1db007f41a61 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -767,15 +767,15 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if(rev == 0x00) + if (rev == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if(cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && rev < 5) no_piix_dma = 2; } - if(no_piix_dma) + if (no_piix_dma) dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); - if(no_piix_dma == 2) + if (no_piix_dma == 2) dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); return no_piix_dma; } From 957d2df1801865eb1e63864bc63b970aa9c460ba Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 23 May 2006 13:18:57 +0100 Subject: [PATCH 186/258] [PATCH] libata: Remove obsolete flag ATA_FLAG_IRQ_MASK was added when I did the original data transfer with IRQ masked bits for PIO. It has since been replaced by ->pio_data_xfer methods so should be removed so nobody uses it by mistake thinking it still works. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 25a6bf181599..9c60b4a4e2fd 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -149,7 +149,6 @@ enum { ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */ - ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */ ATA_FLAG_PIO_POLLING = (1 << 10), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 11), /* host supports NCQ */ From 89bad5892abca55f56d0ea713c7306d1f845ac8e Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 26 May 2006 13:49:18 +0800 Subject: [PATCH 187/258] [PATCH] libata: add back ->data_xfer to ata_piix.c Add back ->data_xfer and ->mode_filter to ata_piix.c. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 1db007f41a61..ad41dfd33e06 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -228,6 +228,7 @@ static const struct ata_port_operations piix_pata_ops = { .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, + .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -243,6 +244,7 @@ static const struct ata_port_operations piix_pata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, @@ -274,6 +276,7 @@ static const struct ata_port_operations piix_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, From 622b20fcb8b42aa4c3c87c0a036f2ad0927b64bc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 24 May 2006 14:06:11 +0100 Subject: [PATCH 188/258] [PATCH] PCI identifiers for the pata_via update These IDs are also used by the drivers/ide/pci changes submitted by VIA. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 233f60741c82..e75727954a12 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1238,6 +1238,7 @@ #define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259 #define PCI_DEVICE_ID_VIA_3269_0 0x0269 #define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282 +#define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8363_0 0x0305 #define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 #define PCI_DEVICE_ID_VIA_8371_0 0x0391 @@ -1245,6 +1246,7 @@ #define PCI_DEVICE_ID_VIA_82C561 0x0561 #define PCI_DEVICE_ID_VIA_82C586_1 0x0571 #define PCI_DEVICE_ID_VIA_82C576 0x0576 +#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x0581 #define PCI_DEVICE_ID_VIA_82C586_0 0x0586 #define PCI_DEVICE_ID_VIA_82C596 0x0596 #define PCI_DEVICE_ID_VIA_82C597_0 0x0597 @@ -1285,10 +1287,11 @@ #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_8251 0x3287 -#define PCI_DEVICE_ID_VIA_3296_0 0x0296 +#define PCI_DEVICE_ID_VIA_8237A 0x3337 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 #define PCI_DEVICE_ID_VIA_8365_1 0x8305 +#define PCI_DEVICE_ID_VIA_CX700 0x8324 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 From 75e995855f45a83afdae34d50c0b3ee14fb23b7a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 24 May 2006 14:14:41 +0100 Subject: [PATCH 189/258] [PATCH] libata: add pio_data_xfer_noirq Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 25 +++++++++++++++++++++++++ include/linux/libata.h | 2 ++ 2 files changed, 27 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 074a46e5bbdd..f19fe662f0ca 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3611,6 +3611,30 @@ void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, } } +/** + * ata_pio_data_xfer_noirq - Transfer data by PIO + * @adev: device to target + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by PIO. Do the + * transfer with interrupts disabled. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + unsigned long flags; + local_irq_save(flags); + ata_pio_data_xfer(adev, buf, buflen, write_data); + local_irq_restore(flags); +} + + /** * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. * @qc: Command on going @@ -5675,6 +5699,7 @@ EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); EXPORT_SYMBOL_GPL(ata_pio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_noop_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); diff --git a/include/linux/libata.h b/include/linux/libata.h index 9c60b4a4e2fd..b0ee1c1437d6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -651,6 +651,8 @@ extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data); extern void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data); +extern void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); From ef2824073fba9def3cf122e89cc485f66dd71f70 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 29 May 2006 01:06:23 -0400 Subject: [PATCH 190/258] libata debugging: set initial dbg value This patch sets the prerequisites for the new debugging scheme that more or less resembles Donald Becker's net driver example. This one liner doesn't change any functionality beside setting the appropriate debug level for the msg_enable control in the ata_port struct, which will be later used by the ata_msg_* macros to control the amount of debug information sent to printk. Signed-off-by: Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index abcf17ebda90..11df827e166f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5185,6 +5185,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; + ap->msg_enable = ATA_MSG_DRV; INIT_WORK(&ap->port_task, NULL, NULL); INIT_LIST_HEAD(&ap->eh_done_q); From 20952b699035448d2277c64efc5910a31be66ed1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:23 +0900 Subject: [PATCH 191/258] [PATCH] libata: set PIO-0 after successful EH reset Set ata_device->pio_mode to XFER_PIO_0 after a successful reset. This is to keep EH resets consistent with probe resets as updated by the commit b6079ca409bf88c248992e96510dd6f610f7ed89. Note that, with soon-to-follow hotplug update, EH resets will include probe resets. Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 71b45ad2c124..b88f492eab12 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1287,7 +1287,7 @@ static int ata_eh_reset(struct ata_port *ap, ata_reset_fn_t softreset, unsigned int classes[ATA_MAX_DEVICES]; int tries = ATA_EH_RESET_TRIES; ata_reset_fn_t reset; - int rc; + int i, rc; if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && !(ehc->i.action & ATA_EH_HARDRESET)))) @@ -1319,6 +1319,12 @@ static int ata_eh_reset(struct ata_port *ap, ata_reset_fn_t softreset, } if (rc == 0) { + /* After the reset, the device state is PIO 0 and the + * controller state is undefined. Record the mode. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].pio_mode = XFER_PIO_0; + if (postreset) postreset(ap, classes); From 7395acb2c840fd4d0cacc91d6fb71440057141ab Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:25 +0900 Subject: [PATCH 192/258] [PATCH] libata: shift host flag constants Nudge host flag constants to make a room after ATA_FLAG_EH_PENDING. New EH flag will be added. Signed-off-by: Tejun Heo --- include/linux/libata.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index b0ee1c1437d6..3f9c65f1aafa 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -149,14 +149,14 @@ enum { ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */ - ATA_FLAG_PIO_POLLING = (1 << 10), /* use polling PIO if LLD - * doesn't handle PIO interrupts */ - ATA_FLAG_NCQ = (1 << 11), /* host supports NCQ */ + ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD + * doesn't handle PIO interrupts */ + ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ - ATA_FLAG_DEBUGMSG = (1 << 14), - ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* flush port task */ + ATA_FLAG_DEBUGMSG = (1 << 13), + ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */ - ATA_FLAG_EH_PENDING = (1 << 16), /* EH pending */ + ATA_FLAG_EH_PENDING = (1 << 15), /* EH pending */ ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ From c6cf9e99d1de5ca6a08fb639bb73031ffe50d802 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:27 +0900 Subject: [PATCH 193/258] [PATCH] libata: implement ata_eh_wait() Implement ata_eh_wait(). On return from this function, it's guaranteed that the EH which was pending or in progress when the function was called is complete - including the tailing part of SCSI EH. This will be used by hotplug and others to synchronize with EH. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 1 + include/linux/libata.h | 2 ++ 4 files changed, 42 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 11df827e166f..66df895c9617 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5189,6 +5189,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, INIT_WORK(&ap->port_task, NULL, NULL); INIT_LIST_HEAD(&ap->eh_done_q); + init_waitqueue_head(&ap->eh_wait_q); /* set cable type */ ap->cbl = ATA_CBL_NONE; diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index b88f492eab12..9173d8f2ce5d 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -237,6 +237,7 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_context.i = ap->eh_info; memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + ap->flags |= ATA_FLAG_EH_IN_PROGRESS; ap->flags &= ~ATA_FLAG_EH_PENDING; spin_unlock_irqrestore(hs_lock, flags); @@ -290,11 +291,48 @@ void ata_scsi_error(struct Scsi_Host *host) ata_port_printk(ap, KERN_INFO, "EH complete\n"); ap->flags &= ~ATA_FLAG_RECOVERED; + /* tell wait_eh that we're done */ + ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; + wake_up_all(&ap->eh_wait_q); + spin_unlock_irqrestore(hs_lock, flags); DPRINTK("EXIT\n"); } +/** + * ata_port_wait_eh - Wait for the currently pending EH to complete + * @ap: Port to wait EH for + * + * Wait until the currently pending EH is complete. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_wait_eh(struct ata_port *ap) +{ + unsigned long flags; + DEFINE_WAIT(wait); + + retry: + spin_lock_irqsave(&ap->host_set->lock, flags); + + while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) { + prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + schedule(); + spin_lock_irqsave(&ap->host_set->lock, flags); + } + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* make sure SCSI EH is complete */ + if (scsi_host_in_recovery(ap->host)) { + msleep(10); + goto retry; + } +} + /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index b76ad7d7062a..d56d9e1d73dc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -103,6 +103,7 @@ extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); +extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 3f9c65f1aafa..2eb5828839e4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -157,6 +157,7 @@ enum { ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */ ATA_FLAG_EH_PENDING = (1 << 15), /* EH pending */ + ATA_FLAG_EH_IN_PROGRESS = (1 << 16), /* EH in progress */ ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ @@ -490,6 +491,7 @@ struct ata_port { u32 msg_enable; struct list_head eh_done_q; + wait_queue_head_t eh_wait_q; void *private_data; From abdda7331d469fa965167365f011d05e226008fb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:29 +0900 Subject: [PATCH 194/258] [PATCH] libata-hp-prep: add flags and eh_info/context fields for hotplug Add hotplug related flags and eh_info/context fields. Signed-off-by: Tejun Heo --- include/linux/libata.h | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 2eb5828839e4..d4a668cf143b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -131,6 +131,9 @@ enum { ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ + ATA_DFLAG_DETACH = (1 << 16), + ATA_DFLAG_DETACHED = (1 << 17), + ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */ @@ -152,6 +155,9 @@ enum { ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ + ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */ + ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H + * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */ @@ -160,6 +166,9 @@ enum { ATA_FLAG_EH_IN_PROGRESS = (1 << 16), /* EH in progress */ ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ + ATA_FLAG_LOADING = (1 << 19), /* boot/loading probe */ + ATA_FLAG_UNLOADING = (1 << 20), /* module is unloading */ + ATA_FLAG_SCSI_HOTPLUG = (1 << 21), /* SCSI hotplug scheduled */ ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ @@ -241,7 +250,9 @@ enum { ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, /* ata_eh_info->flags */ - ATA_EHI_DID_RESET = (1 << 0), /* already reset this port */ + ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ + + ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ /* max repeat if error condition is still set after ->error_handler */ ATA_EH_MAX_REPEAT = 5, @@ -434,6 +445,10 @@ struct ata_eh_info { unsigned int err_mask; /* port-wide err_mask */ unsigned int action; /* ATA_EH_* action mask */ unsigned int flags; /* ATA_EHI_* flags */ + + unsigned long hotplug_timestamp; + unsigned int probe_mask; + char desc[ATA_EH_DESC_LEN]; int desc_len; }; @@ -441,6 +456,8 @@ struct ata_eh_info { struct ata_eh_context { struct ata_eh_info i; int tries[ATA_MAX_DEVICES]; + unsigned int classes[ATA_MAX_DEVICES]; + unsigned int did_probe_mask; }; struct ata_port { From 3ef3b43d5633d30fa3f033f62094ec2e9c5b8376 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:30 +0900 Subject: [PATCH 195/258] [PATCH] libata-hp-prep: implement ata_dev_init() Move initialization of struct ata_device into ata_dev_init() in preparation for hotplug. This patch calls ata_dev_init() from ata_host_init() and thus makes no functional difference. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 26 +++++++++++++++++++++----- drivers/scsi/libata.h | 1 + 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 66df895c9617..8fda8228159c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5141,6 +5141,26 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) ap->ops->port_stop(ap); } +/** + * ata_dev_init - Initialize an ata_device structure + * @dev: Device structure to initialize + * + * Initialize @dev in preparation for probing. + * + * LOCKING: + * Inherited from caller. + */ +void ata_dev_init(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + + memset((void *)dev, 0, sizeof(*dev)); + dev->devno = dev - ap->device; + dev->pio_mask = UINT_MAX; + dev->mwdma_mask = UINT_MAX; + dev->udma_mask = UINT_MAX; +} + /** * ata_host_init - Initialize an ata_port structure * @ap: Structure to initialize @@ -5155,7 +5175,6 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * LOCKING: * Inherited from caller. */ - static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, struct ata_host_set *host_set, const struct ata_probe_ent *ent, unsigned int port_no) @@ -5199,10 +5218,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; dev->ap = ap; - dev->devno = i; - dev->pio_mask = UINT_MAX; - dev->mwdma_mask = UINT_MAX; - dev->udma_mask = UINT_MAX; + ata_dev_init(dev); } #ifdef ATA_IRQ_TRAP diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d56d9e1d73dc..c2b1c919b964 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -62,6 +62,7 @@ extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern void ata_dev_init(struct ata_device *dev); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); From 72fa4b742b327bd1b07985d79a61c61dbd9fd4e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:32 +0900 Subject: [PATCH 196/258] [PATCH] libata-hp-prep: make some ata_device fields persistent Lifetimes of some fields span over device plugging/unplugging. This patch moves such persistent fields to the top of ata_device and separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset are initialized once during host initializatino while all other fields are cleared before hotplugging. Currently ->ap, devno and part of flags are persistent. Note that flags is partially cleared while holding host_set lock. This is to synchronize with later warm plug implementation which will record hotplug request in dev->flags. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 14 ++++++++++++-- include/linux/libata.h | 13 ++++++++++--- 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8fda8228159c..a07ab77d32d6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5153,9 +5153,18 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) void ata_dev_init(struct ata_device *dev) { struct ata_port *ap = dev->ap; + unsigned long flags; - memset((void *)dev, 0, sizeof(*dev)); - dev->devno = dev - ap->device; + /* High bits of dev->flags are used to record warm plug + * requests which occur asynchronously. Synchronize using + * host_set lock. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + dev->flags &= ~ATA_DFLAG_INIT_MASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, + sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); dev->pio_mask = UINT_MAX; dev->mwdma_mask = UINT_MAX; dev->udma_mask = UINT_MAX; @@ -5218,6 +5227,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; dev->ap = ap; + dev->devno = i; ata_dev_init(dev); } diff --git a/include/linux/libata.h b/include/linux/libata.h index d4a668cf143b..aa14eda0656c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -130,6 +130,7 @@ enum { ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ + ATA_DFLAG_INIT_MASK = (1 << 16) - 1, ATA_DFLAG_DETACH = (1 << 16), ATA_DFLAG_DETACHED = (1 << 17), @@ -410,10 +411,11 @@ struct ata_ering { struct ata_device { struct ata_port *ap; - u64 n_sectors; /* size of device, if ATA */ - unsigned long flags; /* ATA_DFLAG_xxx */ - unsigned int class; /* ATA_DEV_xxx */ unsigned int devno; /* 0 or 1 */ + unsigned long flags; /* ATA_DFLAG_xxx */ + /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ + u64 n_sectors; /* size of device, if ATA */ + unsigned int class; /* ATA_DEV_xxx */ u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u8 pio_mode; u8 dma_mode; @@ -439,6 +441,11 @@ struct ata_device { struct ata_ering ering; }; +/* Offset into struct ata_device. Fields above it are maintained + * acress device init. Fields below are zeroed. + */ +#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors) + struct ata_eh_info { struct ata_device *dev; /* offending device */ u32 serror; /* SError from LLDD */ From ab5b3a5b2d887ce63f8c6a7fcb9f5c07ca4b4d43 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:34 +0900 Subject: [PATCH 197/258] [PATCH] libata-hp-prep: update ata_scsi_find_dev() and friends Separate out ata_find_dev() and __ata_scsi_find_dev() from ata_scsi_find_dev(). These will be used by later hotplug implementation. Signed-off-by: Tejun Heo --- drivers/scsi/libata-scsi.c | 40 ++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 9e5cb9f748e6..b45b8b34c0ca 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -52,8 +52,12 @@ #define SECTOR_SIZE 512 typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); -static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); + #define RW_RECOVERY_MPAGE 0x1 #define RW_RECOVERY_MPAGE_LEN 12 @@ -2308,6 +2312,23 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) return 0; } +static struct ata_device * ata_find_dev(struct ata_port *ap, int id) +{ + if (likely(id < ATA_MAX_DEVICES)) + return &ap->device[id]; + return NULL; +} + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev) +{ + /* skip commands not addressed to targets we simulate */ + if (unlikely(scsidev->channel || scsidev->lun)) + return NULL; + + return ata_find_dev(ap, scsidev->id); +} + /** * ata_scsi_find_dev - lookup ata_device from scsi_cmnd * @ap: ATA port to which the device is attached @@ -2324,23 +2345,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) * RETURNS: * Associated ATA device, or %NULL if not found. */ - static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { - struct ata_device *dev; + struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); - /* skip commands not addressed to targets we simulate */ - if (likely(scsidev->id < ATA_MAX_DEVICES)) - dev = &ap->device[scsidev->id]; - else - return NULL; - - if (unlikely((scsidev->channel != 0) || - (scsidev->lun != 0))) - return NULL; - - if (unlikely(!ata_dev_enabled(dev))) + if (unlikely(!dev || !ata_dev_enabled(dev))) return NULL; if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) { From 315343637b988ac32d730a6a9f7bf5866838bcb0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:36 +0900 Subject: [PATCH 198/258] [PATCH] libata-hp-prep: use __ata_scsi_find_dev() Convert direct sdev -> dev lookup to __ata_scsi_find_dev(). Signed-off-by: Tejun Heo --- drivers/scsi/libata-scsi.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index b45b8b34c0ca..05090768d9a8 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -399,7 +399,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) int ata_scsi_device_resume(struct scsi_device *sdev) { struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = &ap->device[sdev->id]; + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); return ata_device_resume(dev); } @@ -407,7 +407,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev) int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) { struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = &ap->device[sdev->id]; + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); return ata_device_suspend(dev, state); } @@ -713,19 +713,15 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, int ata_scsi_slave_config(struct scsi_device *sdev) { + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + ata_scsi_sdev_config(sdev); blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); - if (sdev->id < ATA_MAX_DEVICES) { - struct ata_port *ap; - struct ata_device *dev; - - ap = ata_shost_to_port(sdev->host); - dev = &ap->device[sdev->id]; - + if (dev) ata_scsi_dev_config(sdev, dev); - } return 0; /* scsi layer doesn't check return value, sigh */ } From 5a04bf4befa8bffa012eedc3a0903c158b9131a9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:38 +0900 Subject: [PATCH 199/258] [PATCH] libata-hp-prep: implement ap->hw_sata_spd_limit Add ap->hw_sata_spd_limit and initialize it once during the boot initialization (or driver load initialization). ap->sata_spd_limit is reset to ap->hw_sata_spd_limit on hotplug. This prevents spd limits introduced by earlier devices from affecting new devices. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 21 ++++++++++++--------- include/linux/libata.h | 1 + 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a07ab77d32d6..b1a02fdbb0a5 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2466,17 +2466,9 @@ static int sata_phy_resume(struct ata_port *ap) */ void ata_std_probeinit(struct ata_port *ap) { - u32 scontrol; - /* resume link */ sata_phy_resume(ap); - /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { - int spd = (scontrol >> 4) & 0xf; - ap->sata_spd_limit &= (1 << spd) - 1; - } - /* wait for device */ if (ata_port_online(ap)) ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); @@ -5155,6 +5147,9 @@ void ata_dev_init(struct ata_device *dev) struct ata_port *ap = dev->ap; unsigned long flags; + /* SATA spd limit is bound to the first device */ + ap->sata_spd_limit = ap->hw_sata_spd_limit; + /* High bits of dev->flags are used to record warm plug * requests which occur asynchronously. Synchronize using * host_set lock. @@ -5210,7 +5205,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->udma_mask = ent->udma_mask; ap->flags |= ent->host_flags; ap->ops = ent->port_ops; - ap->sata_spd_limit = UINT_MAX; + ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; ap->msg_enable = ATA_MSG_DRV; @@ -5375,10 +5370,18 @@ int ata_device_add(const struct ata_probe_ent *ent) DPRINTK("probe begin\n"); for (i = 0; i < count; i++) { struct ata_port *ap; + u32 scontrol; int rc; ap = host_set->ports[i]; + /* init sata_spd_limit to the current value */ + if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + int spd = (scontrol >> 4) & 0xf; + ap->hw_sata_spd_limit &= (1 << spd) - 1; + } + ap->sata_spd_limit = ap->hw_sata_spd_limit; + DPRINTK("ata%u: bus probe begin\n", ap->id); rc = ata_bus_probe(ap); DPRINTK("ata%u: bus probe end\n", ap->id); diff --git a/include/linux/libata.h b/include/linux/libata.h index aa14eda0656c..10dc235ad8bc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -489,6 +489,7 @@ struct ata_port { unsigned int mwdma_mask; unsigned int udma_mask; unsigned int cbl; /* cable type; ATA_CBL_xxx */ + unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; /* SATA PHY speed limit */ /* record runtime error info, protected by host_set lock */ From 3edebac41bab7e146578ad9e723ee7fff71c99c0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:40 +0900 Subject: [PATCH 200/258] [PATCH] libata-hp-prep: store attached SCSI device Add device persistent field dev->sdev and store the attached SCSI device. With hotplug, libata needs to know the attached SCSI device to offline and detach it, but scsi_device_lookup() cannot be used because libata will reuse SCSI ID numbers - dead but not gone devices (due to zombie opens, etc...) interfere with the lookup. dev->sdev doesn't hold reference to the SCSI device. It's cleared when the SCSI device goes away. Signed-off-by: Tejun Heo --- drivers/scsi/libata-scsi.c | 14 ++++++++++---- include/linux/libata.h | 1 + 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 05090768d9a8..da9689b70826 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2743,16 +2743,22 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void ata_scsi_scan_host(struct ata_port *ap) { - struct ata_device *dev; unsigned int i; if (ap->flags & ATA_FLAG_DISABLED) return; for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; + struct ata_device *dev = &ap->device[i]; + struct scsi_device *sdev; - if (ata_dev_enabled(dev)) - scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + if (!ata_dev_enabled(dev) || dev->sdev) + continue; + + sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); + if (!IS_ERR(sdev)) { + dev->sdev = sdev; + scsi_device_put(sdev); + } } } diff --git a/include/linux/libata.h b/include/linux/libata.h index 10dc235ad8bc..c0513c752751 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -413,6 +413,7 @@ struct ata_device { struct ata_port *ap; unsigned int devno; /* 0 or 1 */ unsigned long flags; /* ATA_DFLAG_xxx */ + struct scsi_device *sdev; /* attached SCSI device */ /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ u64 n_sectors; /* size of device, if ATA */ unsigned int class; /* ATA_DEV_xxx */ From 453b07accb47c5b54aa2f156ebffac63c543027b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:42 +0900 Subject: [PATCH 201/258] [PATCH] libata-hp-prep: add ata_aux_wq It's best to run ATA hotplug from EH but attaching SCSI devices needs working EH. ata_aux_wq is used to give SCSI hotplug operations a separate context. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 9 +++++++++ drivers/scsi/libata.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b1a02fdbb0a5..04921cf2fc0b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -69,6 +69,8 @@ static void ata_dev_xfermask(struct ata_device *dev); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; +struct workqueue_struct *ata_aux_wq; + int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); @@ -5623,6 +5625,12 @@ static int __init ata_init(void) if (!ata_wq) return -ENOMEM; + ata_aux_wq = create_singlethread_workqueue("ata_aux"); + if (!ata_aux_wq) { + destroy_workqueue(ata_wq); + return -ENOMEM; + } + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); return 0; } @@ -5630,6 +5638,7 @@ static int __init ata_init(void) static void __exit ata_exit(void) { destroy_workqueue(ata_wq); + destroy_workqueue(ata_aux_wq); } module_init(ata_init); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index c2b1c919b964..4458fd9fc1a4 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,6 +39,7 @@ struct ata_scsi_args { }; /* libata-core.c */ +extern struct workqueue_struct *ata_aux_wq; extern int atapi_enabled; extern int atapi_dmadir; extern int libata_fua; From a9beec95352ff675f27d74c3cb97dc258d022497 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:44 +0900 Subject: [PATCH 202/258] [PATCH] libata-hp-prep: make probing related functions global Hotplug will be implemented in libata-eh.c. Make ata_dev_read_id() and ata_dev_configure() global. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 6 +++--- drivers/scsi/libata.h | 3 +++ 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 04921cf2fc0b..a9f79b47b4c3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1167,8 +1167,8 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * RETURNS: * 0 on success, -errno otherwise. */ -static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id) +int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id) { struct ata_port *ap = dev->ap; unsigned int class = *p_class; @@ -1292,7 +1292,7 @@ static void ata_dev_config_ncq(struct ata_device *dev, * RETURNS: * 0 on success, -errno otherwise */ -static int ata_dev_configure(struct ata_device *dev, int print_info) +int ata_dev_configure(struct ata_device *dev, int print_info) { struct ata_port *ap = dev->ap; const u16 *id = dev->id; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 4458fd9fc1a4..2d704be355cc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -50,6 +50,9 @@ extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen); +extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id); +extern int ata_dev_configure(struct ata_device *dev, int print_info); extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); From d7bb4cc7575929a60b0a718daa1bce87bea9a9cc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:46 +0900 Subject: [PATCH 203/258] [PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 107 ++++++++++++++++++++++++++++++++----- include/linux/libata.h | 6 +++ 2 files changed, 99 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a9f79b47b4c3..4823ecefb8a1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,6 +61,11 @@ #include "libata.h" +/* debounce timing parameters in msecs { interval, duration, timeout } */ +const unsigned long sata_deb_timing_boot[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_eh[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_before_fsrst[] = { 100, 2000, 5000 }; + static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); @@ -2427,10 +2432,81 @@ void ata_bus_reset(struct ata_port *ap) DPRINTK("EXIT\n"); } -static int sata_phy_resume(struct ata_port *ap) +/** + * sata_phy_debounce - debounce SATA phy status + * @ap: ATA port to debounce SATA phy status for + * @params: timing parameters { interval, duratinon, timeout } in msec + * + * Make sure SStatus of @ap reaches stable state, determined by + * holding the same value where DET is not 1 for @duration polled + * every @interval, before @timeout. Timeout constraints the + * beginning of the stable state. Because, after hot unplugging, + * DET gets stuck at 1 on some controllers, this functions waits + * until timeout then returns 0 if DET is stable at 1. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) { - unsigned long timeout = jiffies + (HZ * 5); - u32 scontrol, sstatus; + unsigned long interval_msec = params[0]; + unsigned long duration = params[1] * HZ / 1000; + unsigned long timeout = jiffies + params[2] * HZ / 1000; + unsigned long last_jiffies; + u32 last, cur; + int rc; + + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + last = cur; + last_jiffies = jiffies; + + while (1) { + msleep(interval_msec); + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + /* DET stable? */ + if (cur == last) { + if (cur == 1 && time_before(jiffies, timeout)) + continue; + if (time_after(jiffies, last_jiffies + duration)) + return 0; + continue; + } + + /* unstable, start over */ + last = cur; + last_jiffies = jiffies; + + /* check timeout */ + if (time_after(jiffies, timeout)) + return -EBUSY; + } +} + +/** + * sata_phy_resume - resume SATA phy + * @ap: ATA port to resume SATA phy for + * @params: timing parameters { interval, duratinon, timeout } in msec + * + * Resume SATA phy of @ap and debounce it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_resume(struct ata_port *ap, const unsigned long *params) +{ + u32 scontrol; int rc; if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) @@ -2441,16 +2517,12 @@ static int sata_phy_resume(struct ata_port *ap) if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) return rc; - /* Wait for phy to become ready, if necessary. */ - do { - msleep(200); - if ((rc = sata_scr_read(ap, SCR_STATUS, &sstatus))) - return rc; - if ((sstatus & 0xf) != 1) - return 0; - } while (time_before(jiffies, timeout)); + /* Some PHYs react badly if SStatus is pounded immediately + * after resuming. Delay 200ms before debouncing. + */ + msleep(200); - return -EBUSY; + return sata_phy_debounce(ap, params); } /** @@ -2468,8 +2540,10 @@ static int sata_phy_resume(struct ata_port *ap) */ void ata_std_probeinit(struct ata_port *ap) { + static const unsigned long deb_timing[] = { 5, 100, 5000 }; + /* resume link */ - sata_phy_resume(ap); + sata_phy_resume(ap, deb_timing); /* wait for device */ if (ata_port_online(ap)) @@ -2585,7 +2659,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) msleep(1); /* bring phy back */ - sata_phy_resume(ap); + sata_phy_resume(ap, sata_deb_timing_eh); /* TODO: phy layer with polling, timeouts, etc. */ if (ata_port_offline(ap)) { @@ -5718,6 +5792,9 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, * Do not depend on ABI/API stability. */ +EXPORT_SYMBOL_GPL(sata_deb_timing_boot); +EXPORT_SYMBOL_GPL(sata_deb_timing_eh); +EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_device_add); @@ -5757,6 +5834,8 @@ EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_set_spd); +EXPORT_SYMBOL_GPL(sata_phy_debounce); +EXPORT_SYMBOL_GPL(sata_phy_resume); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); diff --git a/include/linux/libata.h b/include/linux/libata.h index c0513c752751..1c167f728fb4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -607,11 +607,17 @@ struct ata_timing { #define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) +extern const unsigned long sata_deb_timing_boot[]; +extern const unsigned long sata_deb_timing_eh[]; +extern const unsigned long sata_deb_timing_before_fsrst[]; + extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); extern void ata_bus_reset(struct ata_port *ap); extern int sata_set_spd(struct ata_port *ap); +extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param); +extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param); extern int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, From f5914a461eb9703773226a0813f6ffcae10c0861 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:48 +0900 Subject: [PATCH 204/258] [PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 3 +- drivers/scsi/libata-bmdma.c | 11 +++-- drivers/scsi/libata-core.c | 85 +++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-eh.c | 60 ++++++++++++++++++++++---- drivers/scsi/sata_sil24.c | 3 +- include/linux/libata.h | 24 ++++++++--- 6 files changed, 165 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 45fd71d80128..8493b021cc07 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1026,7 +1026,8 @@ static void ahci_error_handler(struct ata_port *ap) } /* perform recovery */ - ata_do_eh(ap, ahci_softreset, ahci_hardreset, ahci_postreset); + ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset, + ahci_postreset); } static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 6d30d2c52960..4bc05371737c 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -695,6 +695,7 @@ void ata_bmdma_thaw(struct ata_port *ap) /** * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller * @ap: port to handle error for + * @prereset: prereset method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -710,8 +711,9 @@ void ata_bmdma_thaw(struct ata_port *ap) * LOCKING: * Kernel thread context (may sleep) */ -void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) { struct ata_host_set *host_set = ap->host_set; struct ata_eh_context *ehc = &ap->eh_context; @@ -759,7 +761,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset, ata_eh_thaw_port(ap); /* PIO and DMA engines have been stopped, perform recovery */ - ata_do_eh(ap, softreset, hardreset, postreset); + ata_do_eh(ap, prereset, softreset, hardreset, postreset); } /** @@ -779,7 +781,8 @@ void ata_bmdma_error_handler(struct ata_port *ap) if (sata_scr_valid(ap)) hardreset = sata_std_hardreset; - ata_bmdma_drive_eh(ap, ata_std_softreset, hardreset, ata_std_postreset); + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, + ata_std_postreset); } /** diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4823ecefb8a1..2531a701d6e9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2525,6 +2525,90 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params) return sata_phy_debounce(ap, params); } +static void ata_wait_spinup(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned long end, secs; + int rc; + + /* first, debounce phy if SATA */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_debounce(ap, sata_deb_timing_eh); + + /* if debounced successfully and offline, no need to wait */ + if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) + return; + } + + /* okay, let's give the drive time to spin up */ + end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; + secs = ((end - jiffies) + HZ - 1) / HZ; + + if (time_after(jiffies, end)) + return; + + if (secs > 5) + ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " + "(%lu secs)\n", secs); + + schedule_timeout_uninterruptible(end - jiffies); +} + +/** + * ata_std_prereset - prepare for reset + * @ap: ATA port to be reset + * + * @ap is about to be reset. Initialize it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_prereset(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing; + int rc; + + /* hotplug? */ + if (ehc->i.flags & ATA_EHI_HOTPLUGGED) { + if (ap->flags & ATA_FLAG_HRST_TO_RESUME) + ehc->i.action |= ATA_EH_HARDRESET; + if (ap->flags & ATA_FLAG_SKIP_D2H_BSY) + ata_wait_spinup(ap); + } + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* if SATA, resume phy */ + if (ap->cbl == ATA_CBL_SATA) { + if (ap->flags & ATA_FLAG_LOADING) + timing = sata_deb_timing_boot; + else + timing = sata_deb_timing_eh; + + rc = sata_phy_resume(ap, timing); + if (rc && rc != -EOPNOTSUPP) { + /* phy resume failed */ + ata_port_printk(ap, KERN_WARNING, "failed to resume " + "link for reset (errno=%d)\n", rc); + return rc; + } + } + + /* Wait for !BSY if the controller can wait for the first D2H + * Reg FIS and we don't know that no device is attached. + */ + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + return 0; +} + /** * ata_std_probeinit - initialize probing * @ap: port to be probed @@ -5840,6 +5924,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_probeinit); +EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 9173d8f2ce5d..0e66f140e53b 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1318,20 +1318,58 @@ static void ata_eh_report(struct ata_port *ap) } } -static int ata_eh_reset(struct ata_port *ap, ata_reset_fn_t softreset, +static int ata_eh_reset(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { struct ata_eh_context *ehc = &ap->eh_context; unsigned int classes[ATA_MAX_DEVICES]; int tries = ATA_EH_RESET_TRIES; + unsigned int action; ata_reset_fn_t reset; int i, rc; + /* Determine which reset to use and record in ehc->i.action. + * prereset() may examine and modify it. + */ + action = ehc->i.action; + ehc->i.action &= ~ATA_EH_RESET_MASK; if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && - !(ehc->i.action & ATA_EH_HARDRESET)))) - reset = softreset; + !(action & ATA_EH_HARDRESET)))) + ehc->i.action |= ATA_EH_SOFTRESET; else + ehc->i.action |= ATA_EH_HARDRESET; + + if (prereset) { + rc = prereset(ap); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "prereset failed (errno=%d)\n", rc); + return rc; + } + } + + /* prereset() might have modified ehc->i.action */ + if (ehc->i.action & ATA_EH_HARDRESET) reset = hardreset; + else if (ehc->i.action & ATA_EH_SOFTRESET) + reset = softreset; + else { + /* prereset told us not to reset, bang classes and return */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_NONE; + return 0; + } + + /* did prereset() screw up? if so, fix up to avoid oopsing */ + if (!reset) { + ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested " + "invalid reset type\n"); + if (softreset) + reset = softreset; + else + reset = hardreset; + } retry: ata_port_printk(ap, KERN_INFO, "%s resetting port\n", @@ -1424,6 +1462,7 @@ static int ata_port_nr_enabled(struct ata_port *ap) /** * ata_eh_recover - recover host port after error * @ap: host port to recover + * @prereset: prereset method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -1440,8 +1479,8 @@ static int ata_port_nr_enabled(struct ata_port *ap) * RETURNS: * 0 on success, -errno on failure. */ -static int ata_eh_recover(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, +static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { struct ata_eh_context *ehc = &ap->eh_context; @@ -1469,7 +1508,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_reset_fn_t softreset, if (ehc->i.action & ATA_EH_RESET_MASK) { ata_eh_freeze_port(ap); - rc = ata_eh_reset(ap, softreset, hardreset, postreset); + rc = ata_eh_reset(ap, prereset, softreset, hardreset, + postreset); if (rc) { ata_port_printk(ap, KERN_ERR, "reset failed, giving up\n"); @@ -1586,6 +1626,7 @@ static void ata_eh_finish(struct ata_port *ap) /** * ata_do_eh - do standard error handling * @ap: host port to handle error for + * @prereset: prereset method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -1595,11 +1636,12 @@ static void ata_eh_finish(struct ata_port *ap) * LOCKING: * Kernel thread context (may sleep). */ -void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) { ata_eh_autopsy(ap); ata_eh_report(ap); - ata_eh_recover(ap, softreset, hardreset, postreset); + ata_eh_recover(ap, prereset, softreset, hardreset, postreset); ata_eh_finish(ap); } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4c76f05d9b65..26d7c54c175e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -912,7 +912,8 @@ static void sil24_error_handler(struct ata_port *ap) } /* perform recovery */ - ata_do_eh(ap, sil24_softreset, sil24_hardreset, ata_std_postreset); + ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, + ata_std_postreset); } static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/include/linux/libata.h b/include/linux/libata.h index 1c167f728fb4..fe5f53943c44 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -262,6 +262,15 @@ enum { ATA_PROBE_MAX_TRIES = 3, ATA_EH_RESET_TRIES = 3, ATA_EH_DEV_TRIES = 3, + + /* Drive spinup time (time from power-on to the first D2H FIS) + * in msecs - 8s currently. Failing to get ready in this time + * isn't critical. It will result in reset failure for + * controllers which can't wait for the first D2H FIS. libata + * will retry, so it just has to be long enough to spin up + * most devices. + */ + ATA_SPINUP_WAIT = 8000, }; enum hsm_task_states { @@ -294,9 +303,10 @@ struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); -typedef void (*ata_probeinit_fn_t)(struct ata_port *); -typedef int (*ata_reset_fn_t)(struct ata_port *, unsigned int *); -typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *); +typedef void (*ata_probeinit_fn_t)(struct ata_port *ap); +typedef int (*ata_prereset_fn_t)(struct ata_port *ap); +typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes); +typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); struct ata_ioports { unsigned long cmd_addr; @@ -623,6 +633,7 @@ extern int ata_drive_probe_reset(struct ata_port *ap, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, unsigned int *classes); extern void ata_std_probeinit(struct ata_port *ap); +extern int ata_std_prereset(struct ata_port *ap); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); @@ -706,7 +717,7 @@ extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void ata_bmdma_freeze(struct ata_port *ap); extern void ata_bmdma_thaw(struct ata_port *ap); -extern void ata_bmdma_drive_eh(struct ata_port *ap, +extern void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); @@ -784,8 +795,9 @@ extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); -extern void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); +extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset); /* * printk helpers From 664faf09a05d74085c0b31e2c621d7647322325b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:50 +0900 Subject: [PATCH 205/258] [PATCH] libata-hp-prep: implement followup softreset handling In some cases, hardreset must be followed by SRST. * some controllers can't classify with hardreset * some controllers can't wait for !BSY after hardreset (LLDD should explicitly request followup softreset by returning -EAGAIN) * (later) PM needs SRST w/ PMP==15 to operate after hardreset To handle above cases, this patch implements follow-up softreset. After a hardreset, ata_eh_reset() checks whether any of above conditions are met and do a follow-up softreset if necessary. Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 58 +++++++++++++++++++++++++++++++++++----- 1 file changed, 52 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 0e66f140e53b..8ecb8424d7ba 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1318,16 +1318,28 @@ static void ata_eh_report(struct ata_port *ap) } } -static int ata_eh_reset(struct ata_port *ap, +static int ata_eh_followup_srst_needed(int rc, int classify, + const unsigned int *classes) +{ + if (rc == -EAGAIN) + return 1; + if (rc != 0) + return 0; + if (classify && classes[0] == ATA_DEV_UNKNOWN) + return 1; + return 0; +} + +static int ata_eh_reset(struct ata_port *ap, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { struct ata_eh_context *ehc = &ap->eh_context; - unsigned int classes[ATA_MAX_DEVICES]; + unsigned int *classes = ehc->classes; int tries = ATA_EH_RESET_TRIES; unsigned int action; ata_reset_fn_t reset; - int i, rc; + int i, did_followup_srst, rc; /* Determine which reset to use and record in ehc->i.action. * prereset() may examine and modify it. @@ -1381,10 +1393,44 @@ static int ata_eh_reset(struct ata_port *ap, rc = ata_do_reset(ap, reset, classes); + did_followup_srst = 0; + if (reset == hardreset && + ata_eh_followup_srst_needed(rc, classify, classes)) { + /* okay, let's do follow-up softreset */ + did_followup_srst = 1; + reset = softreset; + + if (!reset) { + ata_port_printk(ap, KERN_ERR, + "follow-up softreset required " + "but no softreset avaliable\n"); + return -EINVAL; + } + + ata_eh_about_to_do(ap, ATA_EH_RESET_MASK); + rc = ata_do_reset(ap, reset, classes); + + if (rc == 0 && classify && + classes[0] == ATA_DEV_UNKNOWN) { + ata_port_printk(ap, KERN_ERR, + "classification failed\n"); + return -EINVAL; + } + } + if (rc && --tries) { + const char *type; + + if (reset == softreset) { + if (did_followup_srst) + type = "follow-up soft"; + else + type = "soft"; + } else + type = "hard"; + ata_port_printk(ap, KERN_WARNING, - "%sreset failed, retrying in 5 secs\n", - reset == softreset ? "soft" : "hard"); + "%sreset failed, retrying in 5 secs\n", type); ssleep(5); if (reset == hardreset) @@ -1508,7 +1554,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ehc->i.action & ATA_EH_RESET_MASK) { ata_eh_freeze_port(ap); - rc = ata_eh_reset(ap, prereset, softreset, hardreset, + rc = ata_eh_reset(ap, 0, prereset, softreset, hardreset, postreset); if (rc) { ata_port_printk(ap, KERN_ERR, From 9a1004d0c11be41c83d06a67dfe74567a41ae582 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:52 +0900 Subject: [PATCH 206/258] [PATCH] libata: export ata_hsm_move() ata_hsm_move() will be used by LLDDs which depend on standard PIO HSM but implement their own interrupt handlers. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 6 +++--- include/linux/libata.h | 2 ++ 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2531a701d6e9..c965eea3b3d4 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4140,9 +4140,8 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) * RETURNS: * 1 when poll next status needed, 0 otherwise. */ - -static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status, int in_wq) +int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) { unsigned long flags = 0; int poll_next; @@ -5885,6 +5884,7 @@ EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); +EXPORT_SYMBOL_GPL(ata_hsm_move); EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); diff --git a/include/linux/libata.h b/include/linux/libata.h index fe5f53943c44..a1ceb5b67b97 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -723,6 +723,8 @@ extern void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_postreset_fn_t postreset); extern void ata_bmdma_error_handler(struct ata_port *ap); extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc); +extern int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, void (*finish_qc)(struct ata_queued_cmd *)); From 20888d83687d5cb374cdb5b0afa746ab79666f4e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:53 +0900 Subject: [PATCH 207/258] [PATCH] sata_sil: add new constants in preparation for new interrupt handler sata_sil is about to get a brand new interrupt handler. Add relevant constants. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 3bd807738698..f926883fd16c 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -54,6 +54,7 @@ enum { */ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, @@ -84,6 +85,20 @@ enum { /* BMDMA/BMDMA2 */ SIL_INTR_STEERING = (1 << 1), + SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ + SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ + SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ + SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ + SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ + SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ + SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ + SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ + SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ + SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ + + /* SIEN */ + SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ + /* * Others */ @@ -226,6 +241,7 @@ static const struct { unsigned long tf; /* ATA taskfile register block */ unsigned long ctl; /* ATA control/altstatus register block */ unsigned long bmdma; /* DMA register block */ + unsigned long bmdma2; /* DMA register block #2 */ unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ unsigned long scr; /* SATA control register block */ unsigned long sien; /* SATA Interrupt Enable register */ @@ -233,10 +249,10 @@ static const struct { unsigned long sfis_cfg; /* SATA FIS reception config register */ } sil_port[] = { /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, + { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, /* ... port 3 */ }; From cbe88fbc72d9e1aa4a6f994cb6e19fa08ae5a0ba Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:55 +0900 Subject: [PATCH 208/258] [PATCH] sata_sil: new interrupt handler The DMA complete bit of these controllers reflects ATA IRQ status while no DMA command is in progress. So, we can tell whether the controller is raising an interrupt or not in deterministic manner. This patch gives sata_sil its own interrupt handler which behaves much better than the original one in terms of error detection and handling. This change is also necessary for later hotplug support. Further improvements are possible, in both 2 and 4 ports versions, we can get all status with only one readl and using custom bmdma operations can further cut down register accesses. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil.c | 92 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 91 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index f926883fd16c..03c1d1b1a04c 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -111,6 +111,8 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); @@ -196,7 +198,7 @@ static const struct ata_port_operations sil_ops = { .thaw = sil_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, + .irq_handler = sil_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = sil_scr_read, .scr_write = sil_scr_write, @@ -336,6 +338,94 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) writel(val, mmio); } +static void sil_host_intr(struct ata_port *ap, u32 bmdma2) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + u8 status; + + if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) + goto freeze; + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto err_hsm; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (bmdma2 & SIL_DMA_ERROR) { + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto err_hsm; + } + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto err_hsm; + + /* ack bmdma irq events */ + ata_bmdma_irq_clear(ap); + + /* kick HSM in the ass */ + ata_hsm_move(ap, qc, status, 0); + + return; + + err_hsm: + qc->err_mask |= AC_ERR_HSM; + freeze: + ata_port_freeze(ap); +} + +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + void __iomem *mmio_base = host_set->mmio_base; + int handled = 0; + int i; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); + + if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) + continue; + + if (!(bmdma2 & SIL_DMA_COMPLETE)) + continue; + + sil_host_intr(ap, bmdma2); + handled = 1; + } + + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + static void sil_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host_set->mmio_base; From 135da34573f6d3bab2976a75063f7232a4311a74 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:57 +0900 Subject: [PATCH 209/258] [PATCH] sata_sil24: rename PORT_PRB to PORT_LRAM and add PORT_LRAM_SLOT_SZ PORT_PRB is a misnomer as the area also contains other stuff. Rename it to PORT_LRAM and add PORT_LRAM_SLOT_SZ. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 26d7c54c175e..a39e8d0332c6 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -98,7 +98,9 @@ enum { * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) */ PORT_REGS_SIZE = 0x2000, - PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ + + PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */ + PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ @@ -1103,7 +1105,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; - probe_ent->port[i].cmd_addr = portu + PORT_PRB; + probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); From e8e008e7b5ed8c65675cc9b3e778b8bb909f65ab Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:27:59 +0900 Subject: [PATCH 210/258] [PATCH] sata_sil24: update sil24_hardreset() Use phy debouncing instead of unconditional wait after DEV_RST and make sil24_hardreset() to request followup SRST as that's the only way to wait for !BSY. Note that the original implementation never worked - if the cached status was !BSY, ata_busy_sleep() finished immediately; otherwise, it timed out regardless of the actual device status. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index a39e8d0332c6..4a830903393d 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -591,7 +591,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; const char *reason; - int tout_msec; + int tout_msec, rc; u32 tmp; /* sil24 does the right thing(tm) without any protection */ @@ -605,10 +605,14 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); - /* SStatus oscillates between zero and valid status for short - * duration after DEV_RST, give it time to settle. + /* SStatus oscillates between zero and valid status after + * DEV_RST, debounce it. */ - msleep(100); + rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst); + if (rc) { + reason = "PHY debouncing failed"; + goto err; + } if (tmp & PORT_CS_DEV_RST) { if (ata_port_offline(ap)) @@ -617,15 +621,13 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) goto err; } - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - reason = "device not ready"; - goto err; - } - - /* sil24 doesn't report device class code after hardreset, - * leave *class alone. + /* Sil24 doesn't store signature FIS after hardreset, so we + * can't wait for BSY to clear. Some devices take a long time + * to get ready and those devices will choke if we don't wait + * for BSY clearance here. Tell libata to perform follow-up + * softreset. */ - return 0; + return -EAGAIN; err: ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); From 0ea035a3d1ad948096e205f08f350c03d5cea453 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:01 +0900 Subject: [PATCH 211/258] [PATCH] libata-hp: implement ata_eh_detach_dev() Implement ata_eh_detach_dev(). This function is responsible for detaching an ATA device and offlining the associated SCSI device atomically so that the detached device is not accessed after ATA detach is complete. Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 28 ++++++++++++++++++++++++++++ drivers/scsi/libata-scsi.c | 24 ++++++++++++++++++++++++ drivers/scsi/libata.h | 1 + 3 files changed, 53 insertions(+) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 8ecb8424d7ba..a049bffdf770 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -666,6 +666,34 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc) __ata_eh_qc_complete(qc); } +/** + * ata_eh_detach_dev - detach ATA device + * @dev: ATA device to detach + * + * Detach @dev. + * + * LOCKING: + * None. + */ +static void ata_eh_detach_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + unsigned long flags; + + ata_dev_disable(dev); + + spin_lock_irqsave(&ap->host_set->lock, flags); + + dev->flags &= ~ATA_DFLAG_DETACH; + + if (ata_scsi_offline_dev(dev)) { + dev->flags |= ATA_DFLAG_DETACHED; + ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + } + + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + /** * ata_eh_about_to_do - about to perform eh_action * @ap: target ATA port diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index da9689b70826..3dc6188af0e8 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2762,3 +2762,27 @@ void ata_scsi_scan_host(struct ata_port *ap) } } } + +/** + * ata_scsi_offline_dev - offline attached SCSI device + * @dev: ATA device to offline attached SCSI device for + * + * This function is called from ata_eh_hotplug() and responsible + * for taking the SCSI device attached to @dev offline. This + * function is called with host_set lock which protects dev->sdev + * against clearing. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if attached SCSI device exists, 0 otherwise. + */ +int ata_scsi_offline_dev(struct ata_device *dev) +{ + if (dev->sdev) { + scsi_device_set_state(dev->sdev, SDEV_OFFLINE); + return 1; + } + return 0; +} diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 2d704be355cc..e38759fdc183 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -75,6 +75,7 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct scsi_transport_template ata_scsi_transport_template; extern void ata_scsi_scan_host(struct ata_port *ap); +extern int ata_scsi_offline_dev(struct ata_device *dev); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); From 084fe639b81c4d418a2cf714acb0475e3713cb73 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:03 +0900 Subject: [PATCH 212/258] [PATCH] libata-hp: implement hotplug Implement ATA part of hotplug. To avoid probing broken devices over and over again, disabled devices are not automatically detached. They are detached only if probing is requested for the device or the associated port is offline. Also, to avoid infinite probing loop, Each device is probed only once per EH run. As SATA PHY status is fragile, devices are detached only after it has used up its recovery chances unless explicitly requested by LLDD or user (LLDD may request direct detach if, for example, it supports cold presence detection). Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 123 ++++++++++++++++++++++++++++++++------- include/linux/libata.h | 13 +++++ 2 files changed, 115 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index a049bffdf770..b53e2e7db498 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -932,10 +932,8 @@ static void ata_eh_analyze_serror(struct ata_port *ap) err_mask |= AC_ERR_SYSTEM; action |= ATA_EH_SOFTRESET; } - if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_HARDRESET; - } + if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) + ata_ehi_hotplugged(&ehc->i); ehc->i.err_mask |= err_mask; ehc->i.action |= action; @@ -1487,11 +1485,12 @@ static int ata_eh_reset(struct ata_port *ap, int classify, return rc; } -static int ata_eh_revalidate(struct ata_port *ap, - struct ata_device **r_failed_dev) +static int ata_eh_revalidate_and_attach(struct ata_port *ap, + struct ata_device **r_failed_dev) { struct ata_eh_context *ehc = &ap->eh_context; struct ata_device *dev; + unsigned long flags; int i, rc = 0; DPRINTK("ENTER\n"); @@ -1513,6 +1512,23 @@ static int ata_eh_revalidate(struct ata_port *ap, break; ehc->i.action &= ~ATA_EH_REVALIDATE; + } else if (dev->class == ATA_DEV_UNKNOWN && + ehc->tries[dev->devno] && + ata_class_enabled(ehc->classes[dev->devno])) { + dev->class = ehc->classes[dev->devno]; + + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + if (rc == 0) + rc = ata_dev_configure(dev, 1); + + if (rc) { + dev->class = ATA_DEV_UNKNOWN; + break; + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(&ap->host_set->lock, flags); } } @@ -1533,6 +1549,36 @@ static int ata_port_nr_enabled(struct ata_port *ap) return cnt; } +static int ata_port_nr_vacant(struct ata_port *ap) +{ + int i, cnt = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ap->device[i].class == ATA_DEV_UNKNOWN) + cnt++; + return cnt; +} + +static int ata_eh_skip_recovery(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + int i; + + if (ap->flags & ATA_FLAG_FROZEN || ata_port_nr_enabled(ap)) + return 0; + + /* skip if class codes for all vacant slots are ATA_DEV_NONE */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + + if (dev->class == ATA_DEV_UNKNOWN && + ehc->classes[dev->devno] != ATA_DEV_NONE) + return 0; + } + + return 1; +} + /** * ata_eh_recover - recover host port after error * @ap: host port to recover @@ -1543,9 +1589,10 @@ static int ata_port_nr_enabled(struct ata_port *ap) * * This is the alpha and omega, eum and yang, heart and soul of * libata exception handling. On entry, actions required to - * recover each devices are recorded in eh_context. This - * function executes all the operations with appropriate retrials - * and fallbacks to resurrect failed devices. + * recover the port and hotplug requests are recorded in + * eh_context. This function executes all the operations with + * appropriate retrials and fallbacks to resurrect failed + * devices, detach goners and greet newcomers. * * LOCKING: * Kernel thread context (may sleep). @@ -1568,6 +1615,19 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, dev = &ap->device[i]; ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + + /* process hotplug request */ + if (dev->flags & ATA_DFLAG_DETACH) + ata_eh_detach_dev(dev); + + if (!ata_dev_enabled(dev) && + ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno)))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } } retry: @@ -1575,15 +1635,18 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, rc = 0; /* skip EH if possible. */ - if (!ata_port_nr_enabled(ap) && !(ap->flags & ATA_FLAG_FROZEN)) + if (ata_eh_skip_recovery(ap)) ehc->i.action = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehc->classes[i] = ATA_DEV_UNKNOWN; + /* reset */ if (ehc->i.action & ATA_EH_RESET_MASK) { ata_eh_freeze_port(ap); - rc = ata_eh_reset(ap, 0, prereset, softreset, hardreset, - postreset); + rc = ata_eh_reset(ap, ata_port_nr_vacant(ap), prereset, + softreset, hardreset, postreset); if (rc) { ata_port_printk(ap, KERN_ERR, "reset failed, giving up\n"); @@ -1593,8 +1656,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_eh_thaw_port(ap); } - /* revalidate existing devices */ - rc = ata_eh_revalidate(ap, &dev); + /* revalidate existing devices and attach new ones */ + rc = ata_eh_revalidate_and_attach(ap, &dev); if (rc) goto dev_fail; @@ -1612,6 +1675,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, dev_fail: switch (rc) { case -ENODEV: + /* device missing, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); case -EINVAL: ehc->tries[dev->devno] = 0; break; @@ -1624,15 +1689,31 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ehc->tries[dev->devno] = 0; } - /* disable device if it has used up all its chances */ - if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) + if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { + /* disable device if it has used up all its chances */ ata_dev_disable(dev); - /* soft didn't work? be haaaaard */ - if (ehc->i.flags & ATA_EHI_DID_RESET) - ehc->i.action |= ATA_EH_HARDRESET; - else - ehc->i.action |= ATA_EH_SOFTRESET; + /* detach if offline */ + if (ata_port_offline(ap)) + ata_eh_detach_dev(dev); + + /* probe if requested */ + if ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } + } else { + /* soft didn't work? be haaaaard */ + if (ehc->i.flags & ATA_EHI_DID_RESET) + ehc->i.action |= ATA_EH_HARDRESET; + else + ehc->i.action |= ATA_EH_SOFTRESET; + } if (ata_port_nr_enabled(ap)) { ata_port_printk(ap, KERN_WARNING, "failed to recover some " diff --git a/include/linux/libata.h b/include/linux/libata.h index a1ceb5b67b97..56971943d261 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -824,6 +824,19 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, (ehi)->desc_len = 0; \ } while (0) +static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) +{ + if (ehi->flags & ATA_EHI_HOTPLUGGED) + return; + + ehi->flags |= ATA_EHI_HOTPLUGGED; + ehi->hotplug_timestamp = jiffies; + + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; + ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1; +} + /* * qc helpers */ From 580b2102327ab8444af5bde4e70b50d268a1d558 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:05 +0900 Subject: [PATCH 213/258] [PATCH] libata-hp: implement SCSI part of hotplug Implement SCSI part of hotplug. This must be done in a separate context as SCSI makes use of EH during probing. SCSI scan fails silently if EH is in progress. In such cases, libata pauses briefly and retries until every device is attached. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 6 +- drivers/scsi/libata-scsi.c | 116 +++++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 1 + include/linux/libata.h | 2 +- 5 files changed, 124 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c965eea3b3d4..8df8ecc51a78 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5370,6 +5370,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->msg_enable = ATA_MSG_DRV; INIT_WORK(&ap->port_task, NULL, NULL); + INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index b53e2e7db498..733dfa532977 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -287,9 +287,13 @@ void ata_scsi_error(struct Scsi_Host *host) /* clean up */ spin_lock_irqsave(hs_lock, flags); + if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) + queue_work(ata_aux_wq, &ap->hotplug_task); + if (ap->flags & ATA_FLAG_RECOVERED) ata_port_printk(ap, KERN_INFO, "EH complete\n"); - ap->flags &= ~ATA_FLAG_RECOVERED; + + ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED); /* tell wait_eh that we're done */ ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 3dc6188af0e8..12563998d97c 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2786,3 +2786,119 @@ int ata_scsi_offline_dev(struct ata_device *dev) } return 0; } + +/** + * ata_scsi_remove_dev - remove attached SCSI device + * @dev: ATA device to remove attached SCSI device for + * + * This function is called from ata_eh_scsi_hotplug() and + * responsible for removing the SCSI device attached to @dev. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_scsi_remove_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct scsi_device *sdev; + unsigned long flags; + + /* Alas, we need to grab scan_mutex to ensure SCSI device + * state doesn't change underneath us and thus + * scsi_device_get() always succeeds. The mutex locking can + * be removed if there is __scsi_device_get() interface which + * increments reference counts regardless of device state. + */ + mutex_lock(&ap->host->scan_mutex); + spin_lock_irqsave(&ap->host_set->lock, flags); + + /* clearing dev->sdev is protected by host_set lock */ + sdev = dev->sdev; + dev->sdev = NULL; + + if (sdev) { + /* If user initiated unplug races with us, sdev can go + * away underneath us after the host_set lock and + * scan_mutex are released. Hold onto it. + */ + if (scsi_device_get(sdev) == 0) { + /* The following ensures the attached sdev is + * offline on return from ata_scsi_offline_dev() + * regardless it wins or loses the race + * against this function. + */ + scsi_device_set_state(sdev, SDEV_OFFLINE); + } else { + WARN_ON(1); + sdev = NULL; + } + } + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + mutex_unlock(&ap->host->scan_mutex); + + if (sdev) { + ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", + sdev->sdev_gendev.bus_id); + + scsi_remove_device(sdev); + scsi_device_put(sdev); + } +} + +/** + * ata_scsi_hotplug - SCSI part of hotplug + * @data: Pointer to ATA port to perform SCSI hotplug on + * + * Perform SCSI part of hotplug. It's executed from a separate + * workqueue after EH completes. This is necessary because SCSI + * hot plugging requires working EH and hot unplugging is + * synchronized with hot plugging with a mutex. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_hotplug(void *data) +{ + struct ata_port *ap = data; + int i; + + if (ap->flags & ATA_FLAG_UNLOADING) { + DPRINTK("ENTER/EXIT - unloading\n"); + return; + } + + DPRINTK("ENTER\n"); + + /* unplug detached devices */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned long flags; + + if (!(dev->flags & ATA_DFLAG_DETACHED)) + continue; + + spin_lock_irqsave(&ap->host_set->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ata_scsi_remove_dev(dev); + } + + /* scan for new ones */ + ata_scsi_scan_host(ap); + + /* If we scanned while EH was in progress, scan would have + * failed silently. Requeue if there are enabled but + * unattached devices. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev) && !dev->sdev) { + queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ); + break; + } + } + + DPRINTK("EXIT\n"); +} diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index e38759fdc183..0586b0cd73fd 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -76,6 +76,7 @@ extern struct scsi_transport_template ata_scsi_transport_template; extern void ata_scsi_scan_host(struct ata_port *ap); extern int ata_scsi_offline_dev(struct ata_device *dev); +extern void ata_scsi_hotplug(void *data); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); diff --git a/include/linux/libata.h b/include/linux/libata.h index 56971943d261..407115624d9f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -521,7 +521,7 @@ struct ata_port { struct ata_host_set *host_set; struct device *dev; - struct work_struct port_task; + struct work_struct port_task, hotplug_task; unsigned int hsm_task_state; From 83c47bcb3c533180a6dda78152334de50065358a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:07 +0900 Subject: [PATCH 214/258] [PATCH] libata-hp: implement warmplug Implement warmplug. User-initiated unplug can be detected by hostt->slave_destroy() and plug by transportt->user_scan(). This patch only implements the two callbacks. The next function will hook them. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-scsi.c | 89 ++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 1 + 3 files changed, 91 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8df8ecc51a78..c61cfc742388 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5942,6 +5942,7 @@ EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); +EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 12563998d97c..7c1ac58c430a 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -57,6 +57,8 @@ static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun); #define RW_RECOVERY_MPAGE 0x1 @@ -726,6 +728,40 @@ int ata_scsi_slave_config(struct scsi_device *sdev) return 0; /* scsi layer doesn't check return value, sigh */ } +/** + * ata_scsi_slave_destroy - SCSI device is about to be destroyed + * @sdev: SCSI device to be destroyed + * + * @sdev is about to be destroyed for hot/warm unplugging. If + * this unplugging was initiated by libata as indicated by NULL + * dev->sdev, this function doesn't have to do anything. + * Otherwise, SCSI layer initiated warm-unplug is in progress. + * Clear dev->sdev, schedule the device for ATA detach and invoke + * EH. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ +void ata_scsi_slave_destroy(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + unsigned long flags; + struct ata_device *dev; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(&ap->host_set->lock, flags); + dev = __ata_scsi_find_dev(ap, sdev); + if (dev && dev->sdev) { + /* SCSI device already in CANCEL state, no need to offline it */ + dev->sdev = NULL; + dev->flags |= ATA_DFLAG_DETACH; + ata_port_schedule_eh(ap); + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + /** * ata_scsi_change_queue_depth - SCSI callback for queue depth config * @sdev: SCSI device to configure queue depth for @@ -2902,3 +2938,56 @@ void ata_scsi_hotplug(void *data) DPRINTK("EXIT\n"); } + +/** + * ata_scsi_user_scan - indication for user-initiated bus scan + * @shost: SCSI host to scan + * @channel: Channel to scan + * @id: ID to scan + * @lun: LUN to scan + * + * This function is called when user explicitly requests bus + * scan. Set probe pending flag and invoke EH. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Zero. + */ +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun) +{ + struct ata_port *ap = ata_shost_to_port(shost); + unsigned long flags; + int rc = 0; + + if (!ap->ops->error_handler) + return -EOPNOTSUPP; + + if ((channel != SCAN_WILD_CARD && channel != 0) || + (lun != SCAN_WILD_CARD && lun != 0)) + return -EINVAL; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (id == SCAN_WILD_CARD) { + ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; + ap->eh_info.action |= ATA_EH_SOFTRESET; + } else { + struct ata_device *dev = ata_find_dev(ap, id); + + if (dev) { + ap->eh_info.probe_mask |= 1 << dev->devno; + ap->eh_info.action |= ATA_EH_SOFTRESET; + } else + rc = -EINVAL; + } + + if (rc == 0) + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + return rc; +} diff --git a/include/linux/libata.h b/include/linux/libata.h index 407115624d9f..74786c33c526 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -734,6 +734,7 @@ extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); +extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth); extern struct ata_device *ata_dev_pair(struct ata_device *adev); From ccf68c3405fca11386004674377d951b9b18e756 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:09 +0900 Subject: [PATCH 215/258] [PATCH] libata-hp: hook warmplug Hook transportt->user_scan() and hostt->slave_destroy(). Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 1 + drivers/scsi/ata_piix.c | 1 + drivers/scsi/libata-scsi.c | 1 + drivers/scsi/pdc_adma.c | 1 + drivers/scsi/sata_mv.c | 1 + drivers/scsi/sata_nv.c | 1 + drivers/scsi/sata_promise.c | 1 + drivers/scsi/sata_qstor.c | 1 + drivers/scsi/sata_sil.c | 1 + drivers/scsi/sata_sil24.c | 1 + drivers/scsi/sata_sis.c | 1 + drivers/scsi/sata_svw.c | 1 + drivers/scsi/sata_sx4.c | 1 + drivers/scsi/sata_uli.c | 1 + drivers/scsi/sata_via.c | 1 + drivers/scsi/sata_vsc.c | 1 + 16 files changed, 16 insertions(+) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 8493b021cc07..afb3805f9e95 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -228,6 +228,7 @@ static struct scsi_host_template ahci_sht = { .proc_name = DRV_NAME, .dma_boundary = AHCI_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index ad41dfd33e06..54c2e52373fd 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -219,6 +219,7 @@ static struct scsi_host_template piix_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, .resume = ata_scsi_device_resume, .suspend = ata_scsi_device_suspend, diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 7c1ac58c430a..5f90d8e33546 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -107,6 +107,7 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { struct scsi_transport_template ata_scsi_transport_template = { .eh_strategy_handler = ata_scsi_error, .eh_timed_out = ata_scsi_timed_out, + .user_scan = ata_scsi_user_scan, }; diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index a341fa8d3291..eb910e4c7d75 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -152,6 +152,7 @@ static struct scsi_host_template adma_ata_sht = { .proc_name = DRV_NAME, .dma_boundary = ADMA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 624983c2e24b..634bab17a6bb 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -390,6 +390,7 @@ static struct scsi_host_template mv_sht = { .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index d93513ef7412..90551246aa46 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -216,6 +216,7 @@ static struct scsi_host_template nv_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 01111594d09c..b2b6ed5216e0 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -121,6 +121,7 @@ static struct scsi_host_template pdc_ata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 68737cadd2d4..98ddc25655f0 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -142,6 +142,7 @@ static struct scsi_host_template qs_ata_sht = { .proc_name = DRV_NAME, .dma_boundary = QS_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 03c1d1b1a04c..7d43cd3a50fc 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -174,6 +174,7 @@ static struct scsi_host_template sil_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4a830903393d..d4ca6d6b402c 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -370,6 +370,7 @@ static struct scsi_host_template sil24_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 82a07bff7e91..a07e6e525173 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -96,6 +96,7 @@ static struct scsi_host_template sis_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 7a4703bfa12a..d9b516836486 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -299,6 +299,7 @@ static struct scsi_host_template k2_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, #ifdef CONFIG_PPC_OF .proc_info = k2_sata_proc_info, #endif diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index c4db6bf14a25..7f864410f7c2 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -191,6 +191,7 @@ static struct scsi_host_template pdc_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 7fae3e06e461..e69ba229adca 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -90,6 +90,7 @@ static struct scsi_host_template uli_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 1c9e2f36805a..c6975c5580ef 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -103,6 +103,7 @@ static struct scsi_host_template svia_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 438e7c6a0f8f..22ca7b848cf6 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -279,6 +279,7 @@ static struct scsi_host_template vsc_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; From 3e706399b03bd237d087d731d4b1b029e546b33d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:11 +0900 Subject: [PATCH 216/258] [PATCH] libata-hp: implement bootplug Implement bootplug - boot probing via hotplug path. While loading, ata_host_add() simply schedules probing and invokes EH. After EH completes, ata_host_add() scans and assicates them with SCSI devices. EH path is slightly modified to handle this (e.g. no autopsy during bootplug). The SCSI part is left in ata_host_add() because it's shared with legacy path and to keep probing order as before (ATA scan all ports in host_set then attach all). Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 49 ++++++++++++++++++++++++++------------ drivers/scsi/libata-eh.c | 27 ++++++++++++++------- 2 files changed, 52 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c61cfc742388..a42877e6b865 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5419,7 +5419,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, DPRINTK("ENTER\n"); - if (!ent->port_ops->probe_reset && + if (!ent->port_ops->probe_reset && !ent->port_ops->error_handler && !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { printk(KERN_ERR "ata%u: no reset mechanism available\n", port_no); @@ -5465,7 +5465,6 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, * RETURNS: * Number of ports registered. Zero on error (no ports registered). */ - int ata_device_add(const struct ata_probe_ent *ent) { unsigned int count = 0, i; @@ -5542,19 +5541,6 @@ int ata_device_add(const struct ata_probe_ent *ent) } ap->sata_spd_limit = ap->hw_sata_spd_limit; - DPRINTK("ata%u: bus probe begin\n", ap->id); - rc = ata_bus_probe(ap); - DPRINTK("ata%u: bus probe end\n", ap->id); - - if (rc) { - /* FIXME: do something useful here? - * Current libata behavior will - * tear down everything when - * the module is removed - * or the h/w is unplugged. - */ - } - rc = scsi_add_host(ap->host, dev); if (rc) { ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); @@ -5564,6 +5550,39 @@ int ata_device_add(const struct ata_probe_ent *ent) * at the very least */ } + + if (!ap->ops->probe_reset) { + unsigned long flags; + + ata_port_probe(ap); + + /* kick EH for boot probing */ + spin_lock_irqsave(&ap->host_set->lock, flags); + + ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ap->eh_info.action |= ATA_EH_SOFTRESET; + + ap->flags |= ATA_FLAG_LOADING; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* wait for EH to finish */ + ata_port_wait_eh(ap); + } else { + DPRINTK("ata%u: bus probe begin\n", ap->id); + rc = ata_bus_probe(ap); + DPRINTK("ata%u: bus probe end\n", ap->id); + + if (rc) { + /* FIXME: do something useful here? + * Current libata behavior will + * tear down everything when + * the module is removed + * or the h/w is unplugged. + */ + } + } } /* probes are done, now scan each port's disk(s) */ diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 733dfa532977..70c132bef68e 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -287,11 +287,14 @@ void ata_scsi_error(struct Scsi_Host *host) /* clean up */ spin_lock_irqsave(hs_lock, flags); - if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) - queue_work(ata_aux_wq, &ap->hotplug_task); - - if (ap->flags & ATA_FLAG_RECOVERED) - ata_port_printk(ap, KERN_INFO, "EH complete\n"); + if (ap->flags & ATA_FLAG_LOADING) { + ap->flags &= ~ATA_FLAG_LOADING; + } else { + if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) + queue_work(ata_aux_wq, &ap->hotplug_task); + if (ap->flags & ATA_FLAG_RECOVERED) + ata_port_printk(ap, KERN_INFO, "EH complete\n"); + } ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED); @@ -1367,6 +1370,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, struct ata_eh_context *ehc = &ap->eh_context; unsigned int *classes = ehc->classes; int tries = ATA_EH_RESET_TRIES; + int verbose = !(ap->flags & ATA_FLAG_LOADING); unsigned int action; ata_reset_fn_t reset; int i, did_followup_srst, rc; @@ -1414,8 +1418,10 @@ static int ata_eh_reset(struct ata_port *ap, int classify, } retry: - ata_port_printk(ap, KERN_INFO, "%s resetting port\n", - reset == softreset ? "soft" : "hard"); + /* shut up during boot probing */ + if (verbose) + ata_port_printk(ap, KERN_INFO, "%s resetting port\n", + reset == softreset ? "soft" : "hard"); /* reset */ ata_eh_about_to_do(ap, ATA_EH_RESET_MASK); @@ -1799,8 +1805,11 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - ata_eh_autopsy(ap); - ata_eh_report(ap); + if (!(ap->flags & ATA_FLAG_LOADING)) { + ata_eh_autopsy(ap); + ata_eh_report(ap); + } + ata_eh_recover(ap, prereset, softreset, hardreset, postreset); ata_eh_finish(ap); } From 720ba12620ee09dce269adf4ad50958adac7bb54 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:13 +0900 Subject: [PATCH 217/258] [PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 10 ++---- drivers/scsi/libata-core.c | 67 ++++++++++++++++++++++++++++++++++---- drivers/scsi/libata-eh.c | 8 +++-- include/linux/libata.h | 1 + 4 files changed, 71 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index afb3805f9e95..60f455bf3696 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1389,21 +1389,17 @@ static void ahci_remove_one (struct pci_dev *pdev) struct device *dev = pci_dev_to_dev(pdev); struct ata_host_set *host_set = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host_set->private_data; - struct ata_port *ap; unsigned int i; int have_msi; - for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; - - scsi_remove_host(ap->host); - } + for (i = 0; i < host_set->n_ports; i++) + ata_port_detach(host_set->ports[i]); have_msi = hpriv->flags & AHCI_FLAG_MSI; free_irq(host_set->irq, host_set); for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; + struct ata_port *ap = host_set->ports[i]; ata_scsi_release(ap->host); scsi_host_put(ap->host); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a42877e6b865..01f2c59536bc 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5609,6 +5609,63 @@ int ata_device_add(const struct ata_probe_ent *ent) return 0; } +/** + * ata_port_detach - Detach ATA port in prepration of device removal + * @ap: ATA port to be detached + * + * Detach all ATA devices and the associated SCSI devices of @ap; + * then, remove the associated SCSI host. @ap is guaranteed to + * be quiescent on return from this function. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_detach(struct ata_port *ap) +{ + unsigned long flags; + int i; + + if (!ap->ops->error_handler) + return; + + /* tell EH we're leaving & flush EH */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags |= ATA_FLAG_UNLOADING; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ata_port_wait_eh(ap); + + /* EH is now guaranteed to see UNLOADING, so no new device + * will be attached. Disable all existing devices. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* Final freeze & EH. All in-flight commands are aborted. EH + * will be skipped and retrials will be terminated with bad + * target. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ata_port_freeze(ap); /* won't be thawed */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ata_port_wait_eh(ap); + + /* Flush hotplug task. The sequence is similar to + * ata_port_flush_task(). + */ + flush_workqueue(ata_aux_wq); + cancel_delayed_work(&ap->hotplug_task); + flush_workqueue(ata_aux_wq); + + /* remove the associated SCSI host */ + scsi_remove_host(ap->host); +} + /** * ata_host_set_remove - PCI layer callback for device removal * @host_set: ATA host set that was removed @@ -5622,18 +5679,15 @@ int ata_device_add(const struct ata_probe_ent *ent) void ata_host_set_remove(struct ata_host_set *host_set) { - struct ata_port *ap; unsigned int i; - for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; - scsi_remove_host(ap->host); - } + for (i = 0; i < host_set->n_ports; i++) + ata_port_detach(host_set->ports[i]); free_irq(host_set->irq, host_set); for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; + struct ata_port *ap = host_set->ports[i]; ata_scsi_release(ap->host); @@ -5901,6 +5955,7 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_device_add); +EXPORT_SYMBOL_GPL(ata_port_detach); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 70c132bef68e..30a83a57a12f 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -46,6 +46,7 @@ #include "libata.h" static void __ata_port_freeze(struct ata_port *ap); +static void ata_eh_finish(struct ata_port *ap); static void ata_ering_record(struct ata_ering *ering, int is_io, unsigned int err_mask) @@ -242,8 +243,11 @@ void ata_scsi_error(struct Scsi_Host *host) spin_unlock_irqrestore(hs_lock, flags); - /* invoke EH */ - ap->ops->error_handler(ap); + /* invoke EH. if unloading, just finish failed qcs */ + if (!(ap->flags & ATA_FLAG_UNLOADING)) + ap->ops->error_handler(ap); + else + ata_eh_finish(ap); /* Exception might have happend after ->error_handler * recovered the port but before this point. Repeat diff --git a/include/linux/libata.h b/include/linux/libata.h index 74786c33c526..f11ba2715bef 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -649,6 +649,7 @@ extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); #endif /* CONFIG_PCI */ extern int ata_device_add(const struct ata_probe_ent *ent); +extern void ata_port_detach(struct ata_port *ap); extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); From ccc4672aff1861a9c80ed9e8ec11dc304b31d307 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:14 +0900 Subject: [PATCH 218/258] [PATCH] ata_piix: convert ata_piix to new probing mechanism Convert ata_piix to new probing mechanism. Automatic hotplug is not supported due to hardware limitation (no PHY event interrupt), but warm plugging works. Signed-off-by: Tejun Heo --- drivers/scsi/ata_piix.c | 87 +++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 55 deletions(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 54c2e52373fd..521b718763f6 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -146,11 +146,10 @@ struct piix_map_db { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); - -static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); -static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_pata_error_handler(struct ata_port *ap); +static void piix_sata_error_handler(struct ata_port *ap); static unsigned int in_module_init = 1; @@ -237,8 +236,6 @@ static const struct ata_port_operations piix_pata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = piix_pata_probe_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -249,7 +246,7 @@ static const struct ata_port_operations piix_pata_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, + .error_handler = piix_pata_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, @@ -269,8 +266,6 @@ static const struct ata_port_operations piix_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = piix_sata_probe_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -281,7 +276,7 @@ static const struct ata_port_operations piix_sata_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, + .error_handler = piix_sata_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, @@ -466,59 +461,51 @@ static void piix_pata_cbl_detect(struct ata_port *ap) } /** - * piix_pata_probeinit - probeinit for PATA host controller + * piix_pata_prereset - prereset for PATA host controller * @ap: Target port * - * Probeinit including cable detection. + * Prereset including cable detection. * * LOCKING: * None (inherited from caller). */ -static void piix_pata_probeinit(struct ata_port *ap) -{ - piix_pata_cbl_detect(ap); - ata_std_probeinit(ap); -} - -/** - * piix_pata_probe_reset - Perform reset on PATA port and classify - * @ap: Port to reset - * @classes: Resulting classes of attached devices - * - * Reset PATA phy and classify attached devices. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) +static int piix_pata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - return ata_drive_probe_reset(ap, piix_pata_probeinit, - ata_std_softreset, NULL, - ata_std_postreset, classes); + piix_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void piix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); } /** - * piix_sata_probe - Probe PCI device for present SATA devices - * @ap: Port associated with the PCI device we wish to probe + * piix_sata_prereset - prereset for SATA host controller + * @ap: Target port * * Reads and configures SATA PCI device's PCI config register * Port Configuration and Status (PCS) to determine port and - * device availability. + * device availability. Return -ENODEV to skip reset if no + * device is present. * * LOCKING: * None (inherited from caller). * * RETURNS: - * Mask of avaliable devices on the port. + * 0 if device is present, -ENODEV otherwise. */ -static unsigned int piix_sata_probe (struct ata_port *ap) +static int piix_sata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); const unsigned int *map = ap->host_set->private_data; @@ -560,29 +547,19 @@ static unsigned int piix_sata_probe (struct ata_port *ap) DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", ap->id, pcs, present_mask); - return present_mask; -} - -/** - * piix_sata_probe_reset - Perform reset on SATA port and classify - * @ap: Port to reset - * @classes: Resulting classes of attached devices - * - * Reset SATA phy and classify attached devices. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - if (!piix_sata_probe(ap)) { + if (!present_mask) { ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - return ata_drive_probe_reset(ap, ata_std_probeinit, - ata_std_softreset, NULL, - ata_std_postreset, classes); + return ata_std_prereset(ap); +} + +static void piix_sata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_std_postreset); } /** From e573890b00426189e1e223967a2c46fb758bf06e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:16 +0900 Subject: [PATCH 219/258] [PATCH] sata_sil: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling SATA IRQ for SError.N, marking ehi for hotplug and scheduling EH on SATA IRQs. Sil3112/3512/3114 family of controllers use COMRESET as TF clearing point and can reliably wait for D2H FIS after COMRESET whether the FIS is the first D2H FIS after POR or in response to the COMRESET. Thus, setting ATA_FLAG_HRST_TO_RESUME is enough for device detection after hotplug. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 7d43cd3a50fc..0898cbe6458c 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -56,7 +56,7 @@ enum { SIL_FLAG_MOD15WRITE = (1 << 30), SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO, + ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, /* * Controller IDs @@ -186,7 +186,6 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = ata_std_probe_reset, .post_set_mode = sil_post_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -344,6 +343,11 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); u8 status; + if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { + ata_ehi_hotplugged(&ap->eh_info); + goto freeze; + } + if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) goto freeze; @@ -415,7 +419,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance, if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) continue; - if (!(bmdma2 & SIL_DMA_COMPLETE)) + if (!(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) continue; sil_host_intr(ap, bmdma2); @@ -432,6 +436,9 @@ static void sil_freeze(struct ata_port *ap) void __iomem *mmio_base = ap->host_set->mmio_base; u32 tmp; + /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ + writel(0, mmio_base + sil_port[ap->port_no].sien); + /* plug IRQ */ tmp = readl(mmio_base + SIL_SYSCFG); tmp |= SIL_MASK_IDE0_INT << ap->port_no; @@ -448,6 +455,9 @@ static void sil_thaw(struct ata_port *ap) ata_chk_status(ap); ata_bmdma_irq_clear(ap); + /* turn on SATA IRQ */ + writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); + /* turn on IRQ */ tmp = readl(mmio_base + SIL_SYSCFG); tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); @@ -621,11 +631,6 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) mmio_base + sil_port[2].bmdma); } - /* mask all SATA phy-related interrupts */ - /* TODO: unmask bit 6 (SError N bit) for hotplug */ - for (i = 0; i < probe_ent->n_ports; i++) - writel(0, mmio_base + sil_port[i].sien); - pci_set_master(pdev); /* FIXME: check ata_device_add return value */ From 4296971dd36e2c2deae0826305f591480223af88 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:18 +0900 Subject: [PATCH 220/258] [PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 47 ++++++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 60f455bf3696..e261b37c2e48 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -136,6 +136,7 @@ enum { PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | + PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS, PORT_IRQ_ERROR = PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | @@ -200,7 +201,6 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes); static void ahci_irq_clear(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); @@ -241,8 +241,6 @@ static const struct ata_port_operations ahci_ops = { .tf_read = ahci_tf_read, - .probe_reset = ahci_probe_reset, - .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, @@ -267,7 +265,8 @@ static const struct ata_port_info ahci_port_info[] = { { .sht = &ahci_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, @@ -277,6 +276,7 @@ static const struct ata_port_info ahci_port_info[] = { .sht = &ahci_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_RESET_NEEDS_CLO, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -569,6 +569,17 @@ static int ahci_clo(struct ata_port *ap) return 0; } +static int ahci_prereset(struct ata_port *ap) +{ + if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && + (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { + /* ATA_BUSY hasn't cleared, so send a CLO */ + ahci_clo(ap); + } + + return ata_std_prereset(ap); +} + static int ahci_softreset(struct ata_port *ap, unsigned int *class) { struct ahci_port_priv *pp = ap->private_data; @@ -678,12 +689,22 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) static int ahci_hardreset(struct ata_port *ap, unsigned int *class) { + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; int rc; DPRINTK("ENTER\n"); ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(ap->device, &tf); + tf.command = 0xff; + ata_tf_to_fis(&tf, d2h_fis, 0); + rc = sata_std_hardreset(ap, class); + ahci_start_engine(ap); if (rc == 0 && ata_port_online(ap)) @@ -714,19 +735,6 @@ static void ahci_postreset(struct ata_port *ap, unsigned int *class) } } -static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && - (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { - /* ATA_BUSY hasn't cleared, so send a CLO */ - ahci_clo(ap); - } - - return ata_drive_probe_reset(ap, ata_std_probeinit, - ahci_softreset, ahci_hardreset, - ahci_postreset, classes); -} - static u8 ahci_check_status(struct ata_port *ap) { void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -839,8 +847,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) } if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_SOFTRESET; + ata_ehi_hotplugged(ehi); ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? "connection status changed" : "PHY RDY changed"); } @@ -1027,7 +1034,7 @@ static void ahci_error_handler(struct ata_port *ap) } /* perform recovery */ - ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset, + ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset, ahci_postreset); } From 0542925b25676543e8384edf454668f89227e905 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:20 +0900 Subject: [PATCH 221/258] [PATCH] sata_sil24: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY_CHG, marking ehi for hotplug and scheduling EH on PORT_IRQ_PHYRDY_CHG or PORT_IRQ_DEV_XCHG. Sil3124/32 family of controllers don't have any mechanism to wait for the first D2H FIS after hotplug, so ATA_FLAG_SKIP_D2H_BSY is used. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index d4ca6d6b402c..97e93392f928 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -159,7 +159,8 @@ enum { PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | - PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS, + PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | + PORT_IRQ_UNK_FIS, /* bits[27:16] are unmasked (raw) */ PORT_IRQ_RAW_SHIFT = 16, @@ -228,7 +229,7 @@ enum { /* host flags */ SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ, + ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY, SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ IRQ_STAT_4PORTS = 0xf, @@ -325,7 +326,6 @@ static u8 sil24_check_status(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes); static void sil24_qc_prep(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); @@ -385,8 +385,6 @@ static const struct ata_port_operations sil24_ops = { .tf_read = sil24_tf_read, - .probe_reset = sil24_probe_reset, - .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, @@ -635,13 +633,6 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) return -EIO; } -static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - return ata_drive_probe_reset(ap, ata_std_probeinit, - sil24_softreset, sil24_hardreset, - ata_std_postreset, classes); -} - static inline void sil24_fill_sg(struct ata_queued_cmd *qc, struct sil24_sge *sge) { @@ -772,13 +763,11 @@ static void sil24_error_intr(struct ata_port *ap) ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - if (irq_stat & PORT_IRQ_DEV_XCHG) { - ehi->err_mask |= AC_ERR_ATA_BUS; - /* sil24 doesn't recover very well from phy - * disconnection with a softreset. Force hardreset. - */ - ehi->action |= ATA_EH_HARDRESET; - ata_ehi_push_desc(ehi, ", device_exchanged"); + if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, ", %s", + irq_stat & PORT_IRQ_PHYRDY_CHG ? + "PHY RDY changed" : "device exchanged"); freeze = 1; } From 52783c5dcc8d317bc8c3e2692d366e8a305abada Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:22 +0900 Subject: [PATCH 222/258] [PATCH] libata-hp: killl ops->probe_reset Now that all drivers implementing new EH are converted to new probing mechanism, ops->probe_reset doesn't have any user. Kill it. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 187 +++---------------------------------- include/linux/libata.h | 8 -- 2 files changed, 13 insertions(+), 182 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 01f2c59536bc..30a6020c5121 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1479,31 +1479,21 @@ static int ata_bus_probe(struct ata_port *ap) down_xfermask = 0; /* reset and determine device classes */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; + ap->ops->phy_reset(ap); - if (ap->ops->probe_reset) { - rc = ap->ops->probe_reset(ap, classes); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "reset failed (errno=%d)\n", rc); - return rc; - } - } else { - ap->ops->phy_reset(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (!(ap->flags & ATA_FLAG_DISABLED)) - classes[i] = ap->device[i].class; - ap->device[i].class = ATA_DEV_UNKNOWN; - } + if (!(ap->flags & ATA_FLAG_DISABLED) && + dev->class != ATA_DEV_UNKNOWN) + classes[dev->devno] = dev->class; + else + classes[dev->devno] = ATA_DEV_NONE; - ata_port_probe(ap); + dev->class = ATA_DEV_UNKNOWN; } - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; + ata_port_probe(ap); /* after the reset the device state is PIO 0 and the controller state is undefined. Record the mode */ @@ -2609,38 +2599,12 @@ int ata_std_prereset(struct ata_port *ap) return 0; } -/** - * ata_std_probeinit - initialize probing - * @ap: port to be probed - * - * @ap is about to be probed. Initialize it. This function is - * to be used as standard callback for ata_drive_probe_reset(). - * - * NOTE!!! Do not use this function as probeinit if a low level - * driver implements only hardreset. Just pass NULL as probeinit - * in that case. Using this function is probably okay but doing - * so makes reset sequence different from the original - * ->phy_reset implementation and Jeff nervous. :-P - */ -void ata_std_probeinit(struct ata_port *ap) -{ - static const unsigned long deb_timing[] = { 5, 100, 5000 }; - - /* resume link */ - sata_phy_resume(ap, deb_timing); - - /* wait for device */ - if (ata_port_online(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); -} - /** * ata_std_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices * - * Reset host port using ATA SRST. This function is to be used - * as standard callback for ata_drive_*_reset() functions. + * Reset host port using ATA SRST. * * LOCKING: * Kernel thread context (may sleep) @@ -2695,8 +2659,6 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) * @class: resulting class of attached device * * SATA phy-reset host port using DET bits of SControl register. - * This function is to be used as standard callback for - * ata_drive_*_reset(). * * LOCKING: * Kernel thread context (may sleep) @@ -2775,9 +2737,6 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) * the device might have been reset more than once using * different reset methods before postreset is invoked. * - * This function is to be used as standard callback for - * ata_drive_*_reset(). - * * LOCKING: * Kernel thread context (may sleep) */ @@ -2824,32 +2783,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) DPRINTK("EXIT\n"); } -/** - * ata_std_probe_reset - standard probe reset method - * @ap: prot to perform probe-reset - * @classes: resulting classes of attached devices - * - * The stock off-the-shelf ->probe_reset method. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (sata_scr_valid(ap)) - hardreset = sata_std_hardreset; - - return ata_drive_probe_reset(ap, ata_std_probeinit, - ata_std_softreset, hardreset, - ata_std_postreset, classes); -} - int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, unsigned int *classes) { @@ -2878,97 +2811,6 @@ int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, return 0; } -/** - * ata_drive_probe_reset - Perform probe reset with given methods - * @ap: port to reset - * @probeinit: probeinit method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * @classes: resulting classes of attached devices - * - * Reset the specified port and classify attached devices using - * given methods. This function prefers softreset but tries all - * possible reset sequences to reset and classify devices. This - * function is intended to be used for constructing ->probe_reset - * callback by low level drivers. - * - * Reset methods should follow the following rules. - * - * - Return 0 on sucess, -errno on failure. - * - If classification is supported, fill classes[] with - * recognized class codes. - * - If classification is not supported, leave classes[] alone. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV - * if classification fails, and any error code from reset - * methods. - */ -int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset, unsigned int *classes) -{ - int rc = -EINVAL; - - ata_eh_freeze_port(ap); - - if (probeinit) - probeinit(ap); - - if (softreset && !sata_set_spd_needed(ap)) { - rc = ata_do_reset(ap, softreset, classes); - if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) - goto done; - ata_port_printk(ap, KERN_INFO, "softreset failed, " - "will try hardreset in 5 secs\n"); - ssleep(5); - } - - if (!hardreset) - goto done; - - while (1) { - rc = ata_do_reset(ap, hardreset, classes); - if (rc == 0) { - if (classes[0] != ATA_DEV_UNKNOWN) - goto done; - break; - } - - if (sata_down_spd_limit(ap)) - goto done; - - ata_port_printk(ap, KERN_INFO, "hardreset failed, " - "will retry in 5 secs\n"); - ssleep(5); - } - - if (softreset) { - ata_port_printk(ap, KERN_INFO, - "hardreset succeeded without classification, " - "will retry softreset in 5 secs\n"); - ssleep(5); - - rc = ata_do_reset(ap, softreset, classes); - } - - done: - if (rc == 0) { - if (postreset) - postreset(ap, classes); - - ata_eh_thaw_port(ap); - - if (classes[0] == ATA_DEV_UNKNOWN) - rc = -ENODEV; - } - return rc; -} - /** * ata_dev_same_device - Determine whether new ID matches configured device * @dev: device to compare against @@ -5419,7 +5261,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, DPRINTK("ENTER\n"); - if (!ent->port_ops->probe_reset && !ent->port_ops->error_handler && + if (!ent->port_ops->error_handler && !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { printk(KERN_ERR "ata%u: no reset mechanism available\n", port_no); @@ -5551,7 +5393,7 @@ int ata_device_add(const struct ata_probe_ent *ent) */ } - if (!ap->ops->probe_reset) { + if (ap->ops->error_handler) { unsigned long flags; ata_port_probe(ap); @@ -5998,13 +5840,10 @@ EXPORT_SYMBOL_GPL(sata_phy_resume); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_probeinit); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); -EXPORT_SYMBOL_GPL(ata_std_probe_reset); -EXPORT_SYMBOL_GPL(ata_drive_probe_reset); EXPORT_SYMBOL_GPL(ata_dev_revalidate); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); diff --git a/include/linux/libata.h b/include/linux/libata.h index f11ba2715bef..a2a33a902917 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -303,7 +303,6 @@ struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); -typedef void (*ata_probeinit_fn_t)(struct ata_port *ap); typedef int (*ata_prereset_fn_t)(struct ata_port *ap); typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes); typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); @@ -553,7 +552,6 @@ struct ata_port_operations { void (*phy_reset) (struct ata_port *ap); /* obsolete */ void (*set_mode) (struct ata_port *ap); - int (*probe_reset) (struct ata_port *ap, unsigned int *classes); void (*post_set_mode) (struct ata_port *ap); @@ -628,11 +626,6 @@ extern void ata_bus_reset(struct ata_port *ap); extern int sata_set_spd(struct ata_port *ap); extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param); extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param); -extern int ata_drive_probe_reset(struct ata_port *ap, - ata_probeinit_fn_t probeinit, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset, unsigned int *classes); -extern void ata_std_probeinit(struct ata_port *ap); extern int ata_std_prereset(struct ata_port *ap); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); @@ -688,7 +681,6 @@ extern void ata_std_dev_select (struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); -extern int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); From d87fa38e70853a9607dc34a02d15cf5f149f49f2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:24 +0900 Subject: [PATCH 223/258] [PATCH] libata-hp: move ata_do_reset() to libata-eh.c With ops->probe_init() gone, no user is left in libata-core.c. Move ata_do_reset() to libata-eh.c and make it static. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 28 ---------------------------- drivers/scsi/libata-eh.c | 28 ++++++++++++++++++++++++++++ drivers/scsi/libata.h | 2 -- 3 files changed, 28 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 30a6020c5121..40d16124cc9f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2783,34 +2783,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) DPRINTK("EXIT\n"); } -int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - unsigned int *classes) -{ - int i, rc; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; - - rc = reset(ap, classes); - if (rc) - return rc; - - /* If any class isn't ATA_DEV_UNKNOWN, consider classification - * is complete and convert all ATA_DEV_UNKNOWN to - * ATA_DEV_NONE. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] != ATA_DEV_UNKNOWN) - break; - - if (i < ATA_MAX_DEVICES) - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; - - return 0; -} - /** * ata_dev_same_device - Determine whether new ID matches configured device * @dev: device to compare against diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 30a83a57a12f..d4b80b64342c 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1355,6 +1355,34 @@ static void ata_eh_report(struct ata_port *ap) } } +static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, + unsigned int *classes) +{ + int i, rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + rc = reset(ap, classes); + if (rc) + return rc; + + /* If any class isn't ATA_DEV_UNKNOWN, consider classification + * is complete and convert all ATA_DEV_UNKNOWN to + * ATA_DEV_NONE. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] != ATA_DEV_UNKNOWN) + break; + + if (i < ATA_MAX_DEVICES) + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + return 0; +} + static int ata_eh_followup_srst_needed(int rc, int classify, const unsigned int *classes) { diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 0586b0cd73fd..1dd496f1f7ac 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -57,8 +57,6 @@ extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); -extern int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - unsigned int *classes); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); From 0a1b622ef495d8ebba9ad8982414c6661c16b604 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 11 Jun 2006 11:01:38 +0900 Subject: [PATCH 224/258] [PATCH] libata: add missing finish_wait() call in ata_port_wait_eh() Add missing finish_wait() call after wait loop in ata_port_wait_eh(). Signed-off-by: Tejun Heo --- drivers/scsi/libata-eh.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index d4b80b64342c..6285257a890d 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -334,6 +334,7 @@ void ata_port_wait_eh(struct ata_port *ap) schedule(); spin_lock_irqsave(&ap->host_set->lock, flags); } + finish_wait(&ap->eh_wait_q, &wait); spin_unlock_irqrestore(&ap->host_set->lock, flags); From 9a9c77dc4c4eed9dfb74080e768c0b3c9d905496 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 11 Jun 2006 11:19:00 +0900 Subject: [PATCH 225/258] [PATCH] libata: cosmetic change in struct ata_port Cosmetic change in struct ata_port. Signed-off-by: Tejun Heo --- include/linux/libata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index a2a33a902917..39e6b77de1a9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -520,7 +520,8 @@ struct ata_port { struct ata_host_set *host_set; struct device *dev; - struct work_struct port_task, hotplug_task; + struct work_struct port_task; + struct work_struct hotplug_task; unsigned int hsm_task_state; From 1049cb478783c74ca8c99ef70e7d2bf920b9335b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 8 Jun 2006 22:15:42 -0700 Subject: [PATCH 226/258] [PATCH] libata: add missing ->data_xfer for pdc_adma pdc_adma use libata-core PIO path but were left out during ->data_xfer conversion. Initialize with proper callbacks. This patch is against the current libata-dev#ALL. Controllers which implement their own PIO HSM (ahci and sil24) don't need ->data_xfer, so the above two are the only drivers which were left out during conversion. From: "Barry K. Nathan" Signed-off-by: Barry K. Nathan Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/scsi/pdc_adma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index eb910e4c7d75..7ebe8e03aa96 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -168,6 +168,7 @@ static const struct ata_port_operations adma_ata_ops = { .qc_prep = adma_qc_prep, .qc_issue = adma_qc_issue, .eng_timeout = adma_eng_timeout, + .data_xfer = ata_mmio_data_xfer, .irq_handler = adma_intr, .irq_clear = adma_irq_clear, .port_start = adma_port_start, From b47725743cc53203d275ede5c54985ad92c15f42 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 6 Jun 2006 07:31:14 +0400 Subject: [PATCH 227/258] [PATCH] sata_sil24: endian anotations With help from Tejun Heo. Signed-off-by: Alexey Dobriyan Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 97e93392f928..c8b477c67247 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -37,9 +37,9 @@ * Port request block (PRB) 32 bytes */ struct sil24_prb { - u16 ctrl; - u16 prot; - u32 rx_cnt; + __le16 ctrl; + __le16 prot; + __le32 rx_cnt; u8 fis[6 * 4]; }; @@ -47,17 +47,17 @@ struct sil24_prb { * Scatter gather entry (SGE) 16 bytes */ struct sil24_sge { - u64 addr; - u32 cnt; - u32 flags; + __le64 addr; + __le32 cnt; + __le32 flags; }; /* * Port multiplier */ struct sil24_port_multiplier { - u32 diag; - u32 sactive; + __le32 diag; + __le32 sactive; }; enum { From bd5d825c9434b83925a88bd30eb9eef51908a3c9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 11 Jun 2006 23:17:01 -0400 Subject: [PATCH 228/258] libata: Adjust initial debugging levels through preprocessor defines. Signed-off-by: Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 40d16124cc9f..3f1aa77621fd 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5181,7 +5181,15 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; - ap->msg_enable = ATA_MSG_DRV; + +#if defined(ATA_VERBOSE_DEBUG) + /* turn on all debugging levels */ + ap->msg_enable = 0x00FF; +#elif defined(ATA_DEBUG) + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; +#else + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR; +#endif INIT_WORK(&ap->port_task, NULL, NULL); INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); From 233277cad6dacca6a8e53743641cf43ef7f37c4a Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 7 Jun 2006 11:25:31 -0500 Subject: [PATCH 229/258] [PATCH] libata: Setup nbytes in ata_sg_init_one Setup nbytes in ata_sg_init_one to the total transfer length of the command. This is needed by some HBAs that need to know the total transfer length of each command. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3f1aa77621fd..76b633a2f304 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3287,6 +3287,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) qc->n_elem = 1; qc->orig_n_elem = 1; qc->buf_virt = buf; + qc->nbytes = buflen; sg = qc->__sg; sg_init_one(sg, buf, buflen); From 39b07ce6d9f7cd4da8567baed844801e0aaa7b1a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 11 Jun 2006 23:59:44 -0400 Subject: [PATCH 230/258] libata: more verbose request_irq() failure Suggested by Jarek P. --- drivers/scsi/libata-core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 76b633a2f304..51b3a0ddb238 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5293,6 +5293,7 @@ int ata_device_add(const struct ata_probe_ent *ent) unsigned int count = 0, i; struct device *dev = ent->dev; struct ata_host_set *host_set; + int rc; DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ @@ -5344,9 +5345,13 @@ int ata_device_add(const struct ata_probe_ent *ent) goto err_free_ret; /* obtain irq, that is shared between channels */ - if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set)) + rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host_set); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq, rc); goto err_out; + } /* perform each probe synchronously */ DPRINTK("probe begin\n"); From 3057ac3c1a992ee135cbb7b7d1a12e58d81f0739 Mon Sep 17 00:00:00 2001 From: "zhao, forrest" Date: Mon, 12 Jun 2006 12:01:34 +0800 Subject: [PATCH 231/258] [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5) This patch makes libata snoop 'SET FEATURES - WRITE CACHE ENABLE/DISABLE' command, executing requisite revalidation processes to update cached data. Signed-off-by: Forrest Zhao Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 3 +++ drivers/scsi/libata-scsi.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 1 + include/linux/ata.h | 3 +++ 5 files changed, 44 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 51b3a0ddb238..ddaad1a4f1f1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5194,6 +5194,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, INIT_WORK(&ap->port_task, NULL, NULL); INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); + INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 6285257a890d..f82799e22588 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1554,6 +1554,9 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, if (rc) break; + /* schedule the scsi_rescan_device() here */ + queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); + ehc->i.action &= ~ATA_EH_REVALIDATE; } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 5f90d8e33546..45a49be65042 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1306,6 +1306,17 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) u8 *cdb = cmd->cmnd; int need_sense = (qc->err_mask != 0); + /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and + * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE + * cache + */ + if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && + ((qc->tf.feature == SETFEATURES_WC_ON) || + (qc->tf.feature == SETFEATURES_WC_OFF))) { + qc->ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(qc->ap); + } + /* For ATA pass thru (SAT) commands, generate a sense block if * user mandated it or if there's an error. Note that if we * generate because the user forced us to, a check condition @@ -2992,3 +3003,28 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, return rc; } + +/** + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @data: Pointer to ATA port to perform scsi_rescan_device() + * + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_dev_rescan(void *data) +{ + struct ata_port *ap = data; + struct ata_device *dev; + unsigned int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_enabled(dev)) + scsi_rescan_device(&(dev->sdev->sdev_gendev)); + } +} + diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 1dd496f1f7ac..bdd488897096 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -104,6 +104,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); +extern void ata_scsi_dev_rescan(void *data); /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); diff --git a/include/linux/ata.h b/include/linux/ata.h index c494e1c0531e..3671af869696 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -181,6 +181,9 @@ enum { XFER_PIO_0 = 0x08, XFER_PIO_SLOW = 0x00, + SETFEATURES_WC_ON = 0x02, /* Enable write cache */ + SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: From 3b01b8af2414b6684051da4a1507dfacdbf24f86 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 12 Jun 2006 00:22:04 -0400 Subject: [PATCH 232/258] libata: fix build, by adding required workqueue member to port struct --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/libata.h b/include/linux/libata.h index 39e6b77de1a9..61eea5795d5a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -522,6 +522,7 @@ struct ata_port { struct work_struct port_task; struct work_struct hotplug_task; + struct work_struct scsi_rescan_task; unsigned int hsm_task_state; From 23fa9618094975f803ed0c6a44604b16747b9637 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 14:18:51 +0900 Subject: [PATCH 233/258] [PATCH] sata_sil: add controller unplug detection in sil_interrupt() Short-circuit interrupt handling if BMDMA2 is reported as 0xffffffff indicating device removal. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 0898cbe6458c..a7e99a1def2f 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -419,7 +419,8 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance, if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) continue; - if (!(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) + if (bmdma2 == 0xffffffff || + !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) continue; sil_host_intr(ap, bmdma2); From 551e8889509c30cda31e464e5cbe7572c4e1febd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 14:09:49 +0900 Subject: [PATCH 234/258] [PATCH] libata: fix comment above ata_exec_internal() Add RETURNS comment above ata_exec_internal() and kill extra blank line. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ddaad1a4f1f1..014855e5a43a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -981,8 +981,10 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) * * LOCKING: * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure */ - unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen) From f9be7113b56eb5d013a611d9c65e8d1d2d3f7c94 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 14:11:01 +0900 Subject: [PATCH 235/258] [PATCH] libata: fix ATA_EH_REVALIDATE clearing ATA_EH_REVALIDATE should be cleared after all devices on the target port have been revalidated. Fix ata_eh_revalidate_and_attach() accordingly. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index f82799e22588..782dfba573a9 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1556,8 +1556,6 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, /* schedule the scsi_rescan_device() here */ queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); - - ehc->i.action &= ~ATA_EH_REVALIDATE; } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && ata_class_enabled(ehc->classes[dev->devno])) { @@ -1578,7 +1576,9 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, } } - if (rc) + if (rc == 0) + ehc->i.action &= ~ATA_EH_REVALIDATE; + else *r_failed_dev = dev; DPRINTK("EXIT\n"); From aeb2ecd6096182cc080d37679080c0f088dcd4a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 14:11:43 +0900 Subject: [PATCH 236/258] [PATCH] libata: fast exit from EH while unloading Make EH exit fast if the port is being unloaded. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 782dfba573a9..531a4e11c078 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1680,6 +1680,10 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, down_xfermask = 0; rc = 0; + /* if UNLOADING, finish immediately */ + if (ap->flags & ATA_FLAG_UNLOADING) + goto out; + /* skip EH if possible. */ if (ata_eh_skip_recovery(ap)) ehc->i.action = 0; From d4c85325a817d3351e61c4be64b437116e8483b4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 18:45:55 +0900 Subject: [PATCH 237/258] [PATCH] sata_sil: update device hotplug handling, take #2 SIEN on some 3112 controllers doesn't mask SATA IRQ properly. IRQ stays asserted even after SIEN is masked and IRQ is acked. Also, even while frozen, any SATA PHY event including hardreset raises SATA IRQ. Clearing SError seems to be the only way to deassert SATA IRQ. This patch makes sil_host_intr() clear SError on SATA IRQs and ignore SATA IRQs reported while frozen so that hardreset doesn't trigger hotplug event (which ends up hardresetting again). In such cases, the port still gets re-frozen to minimize the danger of screaming interrupts. This results in one nil EH repeat on controllers with broken SIEN but other than that does no harm. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index a7e99a1def2f..bc9f918a7f28 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -344,7 +344,25 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) u8 status; if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { - ata_ehi_hotplugged(&ap->eh_info); + u32 serror; + + /* SIEN doesn't mask SATA IRQs on some 3112s. Those + * controllers continue to assert IRQ as long as + * SError bits are pending. Clear SError immediately. + */ + serror = sil_scr_read(ap, SCR_ERROR); + sil_scr_write(ap, SCR_ERROR, serror); + + /* Trigger hotplug and accumulate SError only if the + * port isn't already frozen. Otherwise, PHY events + * during hardreset makes controllers with broken SIEN + * repeat probing needlessly. + */ + if (!(ap->flags & ATA_FLAG_FROZEN)) { + ata_ehi_hotplugged(&ap->eh_info); + ap->eh_info.serror |= serror; + } + goto freeze; } From d01712698c7c52bc71f41192e864dccc90a1217d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 22:51:14 +0900 Subject: [PATCH 238/258] [PATCH] libata: fix oops caused rescanning NULL sdev Depending on timing, ata_scsi_dev_rescan() might encounter a device which is enabled but not yet attached to sdev. On such cases, the original code caused oops. This patch makes ata_scsi_dev_rescan() rescan only device which are attached to sdevs. While at it, properly indent leading comment and add description about how it's synchronized with sdev attach/detach. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 45a49be65042..32c1df69091b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -3005,14 +3005,16 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, } /** - * ata_scsi_dev_rescan - initiate scsi_rescan_device() - * @data: Pointer to ATA port to perform scsi_rescan_device() + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @data: Pointer to ATA port to perform scsi_rescan_device() * - * After ATA pass thru (SAT) commands are executed successfully, - * libata need to propagate the changes to SCSI layer. + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. This + * function must be executed from ata_aux_wq such that sdev + * attach/detach don't race with rescan. * - * LOCKING: - * Kernel thread context (may sleep). + * LOCKING: + * Kernel thread context (may sleep). */ void ata_scsi_dev_rescan(void *data) { @@ -3023,8 +3025,7 @@ void ata_scsi_dev_rescan(void *data) for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; - if (ata_dev_enabled(dev)) + if (ata_dev_enabled(dev) && dev->sdev) scsi_rescan_device(&(dev->sdev->sdev_gendev)); } } - From f0eb62b81dd16bfc4034916418c3406ba20011e1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 Jun 2006 23:05:38 +0900 Subject: [PATCH 239/258] [PATCH] libata: add host_set->next for legacy two host_sets case, take #3 For a legacy ATA controller, libata registers two separate host sets. There was no connection between the two hosts making it impossible to traverse all ports related to the controller. This patch adds host_set->next which points to the second host_set and makes ata_pci_remove_one() remove all associated host_sets. * On device removal, all ports hanging off the device are properly detached. Prior to this patch, ports on the first host_set weren't detached casuing oops on driver unloading. * On device removal, both host_sets are properly freed This will also be used by new power management code to suspend and resume all ports of a controller. host_set/port representation will be improved to handle legacy controllers better and this host_set linking will go away with it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-bmdma.c | 15 +++++++++++++-- drivers/scsi/libata-core.c | 4 ++++ include/linux/libata.h | 3 ++- 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 4bc05371737c..13fab97c840e 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -1076,10 +1076,21 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, /* FIXME: check ata_device_add return */ if (legacy_mode) { - if (legacy_mode & (1 << 0)) + struct device *dev = &pdev->dev; + struct ata_host_set *host_set = NULL; + + if (legacy_mode & (1 << 0)) { ata_device_add(probe_ent); - if (legacy_mode & (1 << 1)) + host_set = dev_get_drvdata(dev); + } + + if (legacy_mode & (1 << 1)) { ata_device_add(probe_ent2); + if (host_set) { + host_set->next = dev_get_drvdata(dev); + dev_set_drvdata(dev, host_set); + } + } } else ata_device_add(probe_ent); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 014855e5a43a..d73cb3672d6a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5621,8 +5621,12 @@ void ata_pci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); struct ata_host_set *host_set = dev_get_drvdata(dev); + struct ata_host_set *host_set2 = host_set->next; ata_host_set_remove(host_set); + if (host_set2) + ata_host_set_remove(host_set2); + pci_release_regions(pdev); pci_disable_device(pdev); dev_set_drvdata(dev, NULL); diff --git a/include/linux/libata.h b/include/linux/libata.h index 61eea5795d5a..f03b8664af11 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -356,7 +356,8 @@ struct ata_host_set { unsigned long flags; int simplex_claimed; /* Keep seperate in case we ever need to do this locked */ - struct ata_port * ports[0]; + struct ata_host_set *next; /* for legacy mode */ + struct ata_port *ports[0]; }; struct ata_queued_cmd { From bf717b11aec20965d48dea36dea3eea18a75d18c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 13 Jun 2006 20:27:03 -0400 Subject: [PATCH 240/258] [libata] Update docs to reflect current driver API --- Documentation/DocBook/libata.tmpl | 104 +++++++++++++++++++++++------- drivers/scsi/libata-core.c | 2 +- 2 files changed, 81 insertions(+), 25 deletions(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index f869b03929db..e97c32314541 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -169,6 +169,22 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); + PIO data read/write + +void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + + + +All bmdma-style drivers must implement this hook. This is the low-level +operation that actually copies the data bytes during a PIO data +transfer. +Typically the driver +will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or +ata_mmio_data_xfer(). + + + + ATA command execute void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); @@ -204,11 +220,10 @@ command. u8 (*check_status)(struct ata_port *ap); u8 (*check_altstatus)(struct ata_port *ap); -u8 (*check_err)(struct ata_port *ap); - Reads the Status/AltStatus/Error ATA shadow register from + Reads the Status/AltStatus ATA shadow register from hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use @@ -269,23 +284,6 @@ void (*set_mode) (struct ata_port *ap); - Reset ATA bus - -void (*phy_reset) (struct ata_port *ap); - - - - The very first step in the probe phase. Actions vary depending - on the bus type, typically. After waking up the device and probing - for device presence (PATA and SATA), typically a soft reset - (SRST) will be performed. Drivers typically use the helper - functions ata_bus_reset() or sata_phy_reset() for this hook. - Many SATA drivers use sata_phy_reset() or call it from within - their own phy_reset() functions. - - - - Control PCI IDE BMDMA engine void (*bmdma_setup) (struct ata_queued_cmd *qc); @@ -354,16 +352,74 @@ int (*qc_issue) (struct ata_queued_cmd *qc); - Timeout (error) handling + Exception and probe handling (EH) void (*eng_timeout) (struct ata_port *ap); +void (*phy_reset) (struct ata_port *ap); -This is a high level error handling function, called from the -error handling thread, when a command times out. Most newer -hardware will implement its own error handling code here. IDE BMDMA -drivers may use the helper function ata_eng_timeout(). +Deprecated. Use ->error_handler() instead. + + + +void (*freeze) (struct ata_port *ap); +void (*thaw) (struct ata_port *ap); + + + +ata_port_freeze() is called when HSM violations or some other +condition disrupts normal operation of the port. A frozen port +is not allowed to perform any operation until the port is +thawed, which usually follows a successful reset. + + + +The optional ->freeze() callback can be used for freezing the port +hardware-wise (e.g. mask interrupt and stop DMA engine). If a +port cannot be frozen hardware-wise, the interrupt handler +must ack and clear interrupts unconditionally while the port +is frozen. + + +The optional ->thaw() callback is called to perform the opposite of ->freeze(): +prepare the port for normal operation once again. Unmask interrupts, +start DMA engine, etc. + + + +void (*error_handler) (struct ata_port *ap); + + + +->error_handler() is a driver's hook into probe, hotplug, and recovery +and other exceptional conditions. The primary responsibility of an +implementation is to call ata_do_eh() or ata_bmdma_drive_eh() with a set +of EH hooks as arguments: + + + +'prereset' hook (may be NULL) is called during an EH reset, before any other actions +are taken. + + + +'postreset' hook (may be NULL) is called after the EH reset is performed. Based on +existing conditions, severity of the problem, and hardware capabilities, + + + +Either 'softreset' (may be NULL) or 'hardreset' (may be NULL) will be +called to perform the low-level EH reset. + + + +void (*post_internal_cmd) (struct ata_queued_cmd *qc); + + + +Perform any hardware-specific actions necessary to finish processing +after executing a probe-time or EH-time command via ata_exec_internal(). diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d73cb3672d6a..89c3fbe6e67c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3496,7 +3496,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_mmio_data_xfer - Transfer data by MMIO - * @dev: device for this I/O + * @adev: device for this I/O * @buf: data buffer * @buflen: buffer length * @write_data: read/write From 638ebcc81f40b160f5e8b161e690e9b1b9503c1e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 17 Jun 2006 15:49:55 +0900 Subject: [PATCH 241/258] [PATCH] sata_nv: kill not-working hotplug code sata_nv contained hotplug code which is mainly for demonstrating how hotplug event is handled. This patch kills the demo code in prepration for real hotplug implementation. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 169 ----------------------------------------- 1 file changed, 169 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 90551246aa46..70f81941f76e 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -64,12 +64,6 @@ enum { NV_INT_STATUS_SDEV_PM = 0x20, NV_INT_STATUS_SDEV_ADDED = 0x40, NV_INT_STATUS_SDEV_REMOVED = 0x80, - NV_INT_STATUS_PDEV_HOTPLUG = (NV_INT_STATUS_PDEV_ADDED | - NV_INT_STATUS_PDEV_REMOVED), - NV_INT_STATUS_SDEV_HOTPLUG = (NV_INT_STATUS_SDEV_ADDED | - NV_INT_STATUS_SDEV_REMOVED), - NV_INT_STATUS_HOTPLUG = (NV_INT_STATUS_PDEV_HOTPLUG | - NV_INT_STATUS_SDEV_HOTPLUG), NV_INT_ENABLE = 0x11, NV_INT_ENABLE_CK804 = 0x441, @@ -81,12 +75,6 @@ enum { NV_INT_ENABLE_SDEV_PM = 0x20, NV_INT_ENABLE_SDEV_ADDED = 0x40, NV_INT_ENABLE_SDEV_REMOVED = 0x80, - NV_INT_ENABLE_PDEV_HOTPLUG = (NV_INT_ENABLE_PDEV_ADDED | - NV_INT_ENABLE_PDEV_REMOVED), - NV_INT_ENABLE_SDEV_HOTPLUG = (NV_INT_ENABLE_SDEV_ADDED | - NV_INT_ENABLE_SDEV_REMOVED), - NV_INT_ENABLE_HOTPLUG = (NV_INT_ENABLE_PDEV_HOTPLUG | - NV_INT_ENABLE_SDEV_HOTPLUG), NV_INT_CONFIG = 0x12, NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI @@ -102,12 +90,6 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void nv_host_stop (struct ata_host_set *host_set); -static void nv_enable_hotplug(struct ata_probe_ent *probe_ent); -static void nv_disable_hotplug(struct ata_host_set *host_set); -static int nv_check_hotplug(struct ata_host_set *host_set); -static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent); -static void nv_disable_hotplug_ck804(struct ata_host_set *host_set); -static int nv_check_hotplug_ck804(struct ata_host_set *host_set); enum nv_host_type { @@ -158,34 +140,18 @@ static const struct pci_device_id nv_pci_tbl[] = { struct nv_host_desc { enum nv_host_type host_type; - void (*enable_hotplug)(struct ata_probe_ent *probe_ent); - void (*disable_hotplug)(struct ata_host_set *host_set); - int (*check_hotplug)(struct ata_host_set *host_set); - }; static struct nv_host_desc nv_device_tbl[] = { { .host_type = GENERIC, - .enable_hotplug = NULL, - .disable_hotplug= NULL, - .check_hotplug = NULL, }, { .host_type = NFORCE2, - .enable_hotplug = nv_enable_hotplug, - .disable_hotplug= nv_disable_hotplug, - .check_hotplug = nv_check_hotplug, }, { .host_type = NFORCE3, - .enable_hotplug = nv_enable_hotplug, - .disable_hotplug= nv_disable_hotplug, - .check_hotplug = nv_check_hotplug, }, { .host_type = CK804, - .enable_hotplug = nv_enable_hotplug_ck804, - .disable_hotplug= nv_disable_hotplug_ck804, - .check_hotplug = nv_check_hotplug_ck804, }, }; @@ -275,7 +241,6 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; - struct nv_host *host = host_set->private_data; unsigned int i; unsigned int handled = 0; unsigned long flags; @@ -301,9 +266,6 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, } - if (host->host_desc->check_hotplug) - handled += host->host_desc->check_hotplug(host_set); - spin_unlock_irqrestore(&host_set->lock, flags); return IRQ_RETVAL(handled); @@ -329,10 +291,6 @@ static void nv_host_stop (struct ata_host_set *host_set) { struct nv_host *host = host_set->private_data; - // Disable hotplug event interrupts. - if (host->host_desc->disable_hotplug) - host->host_desc->disable_hotplug(host_set); - kfree(host); ata_pci_host_stop(host_set); @@ -409,10 +367,6 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc != NV_PORTS) goto err_out_iounmap; - // Enable hotplug event interrupts. - if (host->host_desc->enable_hotplug) - host->host_desc->enable_hotplug(probe_ent); - kfree(probe_ent); return 0; @@ -432,129 +386,6 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } -static void nv_enable_hotplug(struct ata_probe_ent *probe_ent) -{ - u8 intr_mask; - - outb(NV_INT_STATUS_HOTPLUG, - probe_ent->port[0].scr_addr + NV_INT_STATUS); - - intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE); - intr_mask |= NV_INT_ENABLE_HOTPLUG; - - outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE); -} - -static void nv_disable_hotplug(struct ata_host_set *host_set) -{ - u8 intr_mask; - - intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE); - - intr_mask &= ~(NV_INT_ENABLE_HOTPLUG); - - outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE); -} - -static int nv_check_hotplug(struct ata_host_set *host_set) -{ - u8 intr_status; - - intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - - // Clear interrupt status. - outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - - if (intr_status & NV_INT_STATUS_HOTPLUG) { - if (intr_status & NV_INT_STATUS_PDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Primary device added\n"); - - if (intr_status & NV_INT_STATUS_PDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Primary device removed\n"); - - if (intr_status & NV_INT_STATUS_SDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Secondary device added\n"); - - if (intr_status & NV_INT_STATUS_SDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Secondary device removed\n"); - - return 1; - } - - return 0; -} - -static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent) -{ - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - u8 intr_mask; - u8 regval; - - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - - writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804); - - intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804); - intr_mask |= NV_INT_ENABLE_HOTPLUG; - - writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804); -} - -static void nv_disable_hotplug_ck804(struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - u8 intr_mask; - u8 regval; - - intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804); - - intr_mask &= ~(NV_INT_ENABLE_HOTPLUG); - - writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804); - - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); -} - -static int nv_check_hotplug_ck804(struct ata_host_set *host_set) -{ - u8 intr_status; - - intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804); - - // Clear interrupt status. - writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804); - - if (intr_status & NV_INT_STATUS_HOTPLUG) { - if (intr_status & NV_INT_STATUS_PDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Primary device added\n"); - - if (intr_status & NV_INT_STATUS_PDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Primary device removed\n"); - - if (intr_status & NV_INT_STATUS_SDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Secondary device added\n"); - - if (intr_status & NV_INT_STATUS_SDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Secondary device removed\n"); - - return 1; - } - - return 0; -} - static int __init nv_init(void) { return pci_module_init(&nv_pci_driver); From e6faf082cd75d6dcdcf89258ddf40c6855df87a1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 17 Jun 2006 15:49:55 +0900 Subject: [PATCH 242/258] [PATCH] sata_nv: kill struct nv_host_desc and nv_host nv_host_desc and nv_host are used to discern different generations of nv controllers. Kill those. New EH/hotplug implementation will use standard port_info/ata_port_operations for that. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 50 ++---------------------------------------- 1 file changed, 2 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 70f81941f76e..e9c4547723c8 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -89,7 +89,6 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs); static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static void nv_host_stop (struct ata_host_set *host_set); enum nv_host_type { @@ -137,30 +136,6 @@ static const struct pci_device_id nv_pci_tbl[] = { { 0, } /* terminate list */ }; -struct nv_host_desc -{ - enum nv_host_type host_type; -}; -static struct nv_host_desc nv_device_tbl[] = { - { - .host_type = GENERIC, - }, - { - .host_type = NFORCE2, - }, - { - .host_type = NFORCE3, - }, - { .host_type = CK804, - }, -}; - -struct nv_host -{ - struct nv_host_desc *host_desc; - unsigned long host_flags; -}; - static struct pci_driver nv_pci_driver = { .name = DRV_NAME, .id_table = nv_pci_tbl, @@ -208,7 +183,7 @@ static const struct ata_port_operations nv_ops = { .scr_write = nv_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = nv_host_stop, + .host_stop = ata_pci_host_stop, }; /* FIXME: The hardware provides the necessary SATA PHY controls @@ -287,19 +262,9 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); } -static void nv_host_stop (struct ata_host_set *host_set) -{ - struct nv_host *host = host_set->private_data; - - kfree(host); - - ata_pci_host_stop(host_set); -} - static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; - struct nv_host *host; struct ata_port_info *ppi; struct ata_probe_ent *probe_ent; int pci_dev_busy = 0; @@ -341,19 +306,10 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!probe_ent) goto err_out_regions; - host = kmalloc(sizeof(struct nv_host), GFP_KERNEL); - if (!host) - goto err_out_free_ent; - - memset(host, 0, sizeof(struct nv_host)); - host->host_desc = &nv_device_tbl[ent->driver_data]; - - probe_ent->private_data = host; - probe_ent->mmio_base = pci_iomap(pdev, 5, 0); if (!probe_ent->mmio_base) { rc = -EIO; - goto err_out_free_host; + goto err_out_free_ent; } base = (unsigned long)probe_ent->mmio_base; @@ -373,8 +329,6 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) err_out_iounmap: pci_iounmap(pdev, probe_ent->mmio_base); -err_out_free_host: - kfree(host); err_out_free_ent: kfree(probe_ent); err_out_regions: From 27e4b2745443cef67220da9a4f5f71b1c5f72442 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 17 Jun 2006 15:49:55 +0900 Subject: [PATCH 243/258] [PATCH] sata_nv: simplify constants Simplify interrupt constants and make NFORCE3 equal to NFORCE2. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 31 ++++++++++++------------------- 1 file changed, 12 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index e9c4547723c8..1cb7b44cb660 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -54,28 +54,21 @@ enum { NV_PORT0_SCR_REG_OFFSET = 0x00, NV_PORT1_SCR_REG_OFFSET = 0x40, + /* INT_STATUS/ENABLE */ NV_INT_STATUS = 0x10, - NV_INT_STATUS_CK804 = 0x440, - NV_INT_STATUS_PDEV_INT = 0x01, - NV_INT_STATUS_PDEV_PM = 0x02, - NV_INT_STATUS_PDEV_ADDED = 0x04, - NV_INT_STATUS_PDEV_REMOVED = 0x08, - NV_INT_STATUS_SDEV_INT = 0x10, - NV_INT_STATUS_SDEV_PM = 0x20, - NV_INT_STATUS_SDEV_ADDED = 0x40, - NV_INT_STATUS_SDEV_REMOVED = 0x80, - NV_INT_ENABLE = 0x11, + NV_INT_STATUS_CK804 = 0x440, NV_INT_ENABLE_CK804 = 0x441, - NV_INT_ENABLE_PDEV_MASK = 0x01, - NV_INT_ENABLE_PDEV_PM = 0x02, - NV_INT_ENABLE_PDEV_ADDED = 0x04, - NV_INT_ENABLE_PDEV_REMOVED = 0x08, - NV_INT_ENABLE_SDEV_MASK = 0x10, - NV_INT_ENABLE_SDEV_PM = 0x20, - NV_INT_ENABLE_SDEV_ADDED = 0x40, - NV_INT_ENABLE_SDEV_REMOVED = 0x80, + /* INT_STATUS/ENABLE bits */ + NV_INT_DEV = 0x01, + NV_INT_PM = 0x02, + NV_INT_ADDED = 0x04, + NV_INT_REMOVED = 0x08, + + NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ + + /* INT_CONFIG */ NV_INT_CONFIG = 0x12, NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI @@ -94,7 +87,7 @@ enum nv_host_type { GENERIC, NFORCE2, - NFORCE3, + NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ CK804 }; From ada364e884eb7e60ee96e84cbce07b3c90234c9d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 17 Jun 2006 15:49:56 +0900 Subject: [PATCH 244/258] [PATCH] sata_nv: better irq handlers nf2/3 and ck804 have irq status register. Implement better irq handler for those flavors of nv. This patch makes different flavors of nv controllers use different irq handlers by using separate port_info for each flavor. This change also makes following EH and hotplug updates easier to integrate. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 211 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 194 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 1cb7b44cb660..94cb17903fae 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -78,8 +78,13 @@ enum { }; static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t nv_interrupt (int irq, void *dev_instance, - struct pt_regs *regs); +static void nv_ck804_host_stop(struct ata_host_set *host_set); +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); @@ -154,7 +159,7 @@ static struct scsi_host_template nv_sht = { .bios_param = ata_std_bios_param, }; -static const struct ata_port_operations nv_ops = { +static const struct ata_port_operations nv_generic_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -170,7 +175,7 @@ static const struct ata_port_operations nv_ops = { .qc_issue = ata_qc_issue_prot, .eng_timeout = ata_eng_timeout, .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_interrupt, + .irq_handler = nv_generic_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = nv_scr_read, .scr_write = nv_scr_write, @@ -179,6 +184,56 @@ static const struct ata_port_operations nv_ops = { .host_stop = ata_pci_host_stop, }; +static const struct ata_port_operations nv_nf2_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .phy_reset = sata_phy_reset, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_nf2_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static const struct ata_port_operations nv_ck804_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .phy_reset = sata_phy_reset, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_ck804_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = nv_ck804_host_stop, +}; + /* FIXME: The hardware provides the necessary SATA PHY controls * to support ATA_FLAG_SATA_RESET. However, it is currently * necessary to disable that flag, to solve misdetection problems. @@ -187,16 +242,43 @@ static const struct ata_port_operations nv_ops = { * This problem really needs to be investigated further. But in the * meantime, we avoid ATA_FLAG_SATA_RESET to get people working. */ -static struct ata_port_info nv_port_info = { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | - /* ATA_FLAG_SATA_RESET | */ - ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_ops, +static struct ata_port_info nv_port_info[] = { + /* generic */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | + /* ATA_FLAG_SATA_RESET | */ + ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_generic_ops, + }, + /* nforce2/3 */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | + /* ATA_FLAG_SATA_RESET | */ + ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_nf2_ops, + }, + /* ck804 */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | + /* ATA_FLAG_SATA_RESET | */ + ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_ck804_ops, + }, }; MODULE_AUTHOR("NVIDIA"); @@ -205,8 +287,8 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, nv_pci_tbl); MODULE_VERSION(DRV_VERSION); -static irqreturn_t nv_interrupt (int irq, void *dev_instance, - struct pt_regs *regs) +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; unsigned int i; @@ -239,6 +321,79 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, return IRQ_RETVAL(handled); } +static int nv_host_intr(struct ata_port *ap, u8 irq_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + int handled; + + /* bail out if not our interrupt */ + if (!(irq_stat & NV_INT_DEV)) + return 0; + + /* DEV interrupt w/ no active qc? */ + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + ata_check_status(ap); + return 1; + } + + /* handle interrupt */ + handled = ata_host_intr(ap, qc); + if (unlikely(!handled)) { + /* spurious, clear it */ + ata_check_status(ap); + } + + return 1; +} + +static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) +{ + int i, handled = 0; + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) + handled += nv_host_intr(ap, irq_stat); + + irq_stat >>= NV_INT_PORT_SHIFT; + } + + return IRQ_RETVAL(handled); +} + +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned long flags; + u8 irq_stat; + irqreturn_t ret; + + spin_lock_irqsave(&host_set->lock, flags); + irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); + ret = nv_do_interrupt(host_set, irq_stat); + spin_unlock_irqrestore(&host_set->lock, flags); + + return ret; +} + +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned long flags; + u8 irq_stat; + irqreturn_t ret; + + spin_lock_irqsave(&host_set->lock, flags); + irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); + ret = nv_do_interrupt(host_set, irq_stat); + spin_unlock_irqrestore(&host_set->lock, flags); + + return ret; +} + static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) @@ -294,7 +449,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; - ppi = &nv_port_info; + ppi = &nv_port_info[ent->driver_data]; probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) goto err_out_regions; @@ -310,6 +465,15 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; + /* enable SATA space for CK804 */ + if (ent->driver_data == CK804) { + u8 regval; + + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + } + pci_set_master(pdev); rc = ata_device_add(probe_ent); @@ -333,6 +497,19 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } +static void nv_ck804_host_stop(struct ata_host_set *host_set) +{ + struct pci_dev *pdev = to_pci_dev(host_set->dev); + u8 regval; + + /* disable SATA space for CK804 */ + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + + ata_pci_host_stop(host_set); +} + static int __init nv_init(void) { return pci_module_init(&nv_pci_driver); From 39f8758259868a01ecad29b4379661dd3f21881f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 17 Jun 2006 15:49:56 +0900 Subject: [PATCH 245/258] [PATCH] sata_nv: convert to new EH Convert to new EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 115 +++++++++++++++++++++++++++++++---------- 1 file changed, 89 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 94cb17903fae..2a1bd85404e0 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -68,6 +68,9 @@ enum { NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ + NV_INT_ALL = 0x0f, + NV_INT_MASK = NV_INT_DEV, + /* INT_CONFIG */ NV_INT_CONFIG = 0x12, NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI @@ -88,6 +91,12 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static void nv_nf2_freeze(struct ata_port *ap); +static void nv_nf2_thaw(struct ata_port *ap); +static void nv_ck804_freeze(struct ata_port *ap); +static void nv_ck804_thaw(struct ata_port *ap); +static void nv_error_handler(struct ata_port *ap); + enum nv_host_type { GENERIC, @@ -166,14 +175,16 @@ static const struct ata_port_operations nv_generic_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .data_xfer = ata_pio_data_xfer, .irq_handler = nv_generic_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -191,14 +202,16 @@ static const struct ata_port_operations nv_nf2_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .freeze = nv_nf2_freeze, + .thaw = nv_nf2_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .data_xfer = ata_pio_data_xfer, .irq_handler = nv_nf2_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -216,14 +229,16 @@ static const struct ata_port_operations nv_ck804_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .freeze = nv_ck804_freeze, + .thaw = nv_ck804_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .data_xfer = ata_pio_data_xfer, .irq_handler = nv_ck804_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -234,22 +249,11 @@ static const struct ata_port_operations nv_ck804_ops = { .host_stop = nv_ck804_host_stop, }; -/* FIXME: The hardware provides the necessary SATA PHY controls - * to support ATA_FLAG_SATA_RESET. However, it is currently - * necessary to disable that flag, to solve misdetection problems. - * See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info. - * - * This problem really needs to be investigated further. But in the - * meantime, we avoid ATA_FLAG_SATA_RESET to get people working. - */ static struct ata_port_info nv_port_info[] = { /* generic */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | - /* ATA_FLAG_SATA_RESET | */ - ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -258,10 +262,7 @@ static struct ata_port_info nv_port_info[] = { /* nforce2/3 */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | - /* ATA_FLAG_SATA_RESET | */ - ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -270,10 +271,7 @@ static struct ata_port_info nv_port_info[] = { /* ck804 */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | - /* ATA_FLAG_SATA_RESET | */ - ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -410,6 +408,71 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); } +static void nv_nf2_freeze(struct ata_port *ap) +{ + unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = inb(scr_addr + NV_INT_ENABLE); + mask &= ~(NV_INT_ALL << shift); + outb(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_nf2_thaw(struct ata_port *ap) +{ + unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + outb(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); + + mask = inb(scr_addr + NV_INT_ENABLE); + mask |= (NV_INT_MASK << shift); + outb(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_ck804_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask &= ~(NV_INT_ALL << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static void nv_ck804_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask |= (NV_INT_MASK << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static int nv_hardreset(struct ata_port *ap, unsigned int *class) +{ + unsigned int dummy; + + /* SATA hardreset fails to retrieve proper device signature on + * some controllers. Don't classify on hardreset. For more + * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 + */ + return sata_std_hardreset(ap, &dummy); +} + +static void nv_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, + nv_hardreset, ata_std_postreset); +} + static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; From 5a44efff4f8fe8139c0c4166ad5aae5f2fa5bced Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 17 Jun 2006 15:49:56 +0900 Subject: [PATCH 246/258] [PATCH] sata_nv: add hotplug support Add hotplug support. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 2a1bd85404e0..19deaa42fbf0 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -69,7 +69,8 @@ enum { NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ NV_INT_ALL = 0x0f, - NV_INT_MASK = NV_INT_DEV, + NV_INT_MASK = NV_INT_DEV | + NV_INT_ADDED | NV_INT_REMOVED, /* INT_CONFIG */ NV_INT_CONFIG = 0x12, @@ -324,6 +325,12 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat) struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); int handled; + /* freeze if hotplugged */ + if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { + ata_port_freeze(ap); + return 1; + } + /* bail out if not our interrupt */ if (!(irq_stat & NV_INT_DEV)) return 0; From c5fa46e175ccd02803031ea071060cdb01521736 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 20 Jun 2006 05:08:44 -0400 Subject: [PATCH 247/258] [libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handler We don't need to use the heavier spin lock in the irq handler. It's quite possible we can do this in nv_generic_interrupt() as well, but I didn't take the time to pursue that train of thought. Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 19deaa42fbf0..be8650f17020 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -371,14 +371,13 @@ static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; - unsigned long flags; u8 irq_stat; irqreturn_t ret; - spin_lock_irqsave(&host_set->lock, flags); + spin_lock(&host_set->lock); irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock(&host_set->lock); return ret; } @@ -387,14 +386,13 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; - unsigned long flags; u8 irq_stat; irqreturn_t ret; - spin_lock_irqsave(&host_set->lock, flags); + spin_lock(&host_set->lock); irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock(&host_set->lock); return ret; } From 40ef1d8d48e364dce689342adfdc475aa53f4808 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 16 Jun 2006 15:13:53 +0900 Subject: [PATCH 248/258] [PATCH] sata_via: convert to new EH, take #3 Convert sata_via to new EH. vt6420 used ATA_FLAG_SRST while vt6421 used ATA_FLAG_SATA_RESET. This difference seems to be an accident rather than intended. This patch makes both flavors use ata_bmdma_error_handler() which makes use of both SRST and SATA hardreset. This behavior change is intended and if it breaks anything, it should be very easy to spot. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_via.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index c6975c5580ef..322890b400a6 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -116,8 +116,6 @@ static const struct ata_port_operations svia_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -127,7 +125,10 @@ static const struct ata_port_operations svia_sata_ops = { .qc_issue = ata_qc_issue_prot, .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -142,7 +143,7 @@ static const struct ata_port_operations svia_sata_ops = { static struct ata_port_info svia_port_info = { .sht = &svia_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = 0x7f, @@ -237,8 +238,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = &svia_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; probe_ent->port_ops = &svia_sata_ops; probe_ent->n_ports = N_PORTS; probe_ent->irq = pdev->irq; From d7a80dad2fe19a2b8c119c8e9cba605474a75a2b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 16 Jun 2006 15:00:18 +0900 Subject: [PATCH 249/258] [PATCH] libata: convert several bmdma-style controllers to new EH, take #3 Convert sata_sis, svw, uli and vsc drivers to new EH. All the drivers used to specify ATA_FLAG_SATA_RESET to tell libata to use SATA hardreset instead of SRST. This patch makes all the converted drivers use the standard bmdma error handler which uses both SRST and SATA hardreset. All the controllers should be able to perform SRST but still needs verification. If some of the controllers can't do SRST, it will be very easy to spot as it will show up during boot probing. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sis.c | 9 +++++---- drivers/scsi/sata_svw.c | 10 ++++++---- drivers/scsi/sata_uli.c | 10 +++++----- drivers/scsi/sata_vsc.c | 8 +++++--- 4 files changed, 21 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index a07e6e525173..809d337ed641 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -107,7 +107,6 @@ static const struct ata_port_operations sis_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -115,7 +114,10 @@ static const struct ata_port_operations sis_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = sis_scr_read, @@ -127,8 +129,7 @@ static const struct ata_port_operations sis_ops = { static struct ata_port_info sis_port_info = { .sht = &sis_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x7, .udma_mask = 0x7f, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d9b516836486..c94b870cf378 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -314,7 +314,6 @@ static const struct ata_port_operations k2_sata_ops = { .check_status = k2_stat_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = k2_bmdma_setup_mmio, .bmdma_start = k2_bmdma_start_mmio, .bmdma_stop = ata_bmdma_stop, @@ -322,7 +321,10 @@ static const struct ata_port_operations k2_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_mmio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = k2_sata_scr_read, @@ -422,8 +424,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); probe_ent->sht = &k2_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO; probe_ent->port_ops = &k2_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index e69ba229adca..f668c997e9af 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -103,8 +103,6 @@ static const struct ata_port_operations uli_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -113,7 +111,10 @@ static const struct ata_port_operations uli_ops = { .qc_issue = ata_qc_issue_prot, .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -128,8 +129,7 @@ static const struct ata_port_operations uli_ops = { static struct ata_port_info uli_port_info = { .sht = &uli_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &uli_ops, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 22ca7b848cf6..d92e3dd37042 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -291,7 +291,6 @@ static const struct ata_port_operations vsc_sata_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -299,7 +298,10 @@ static const struct ata_port_operations vsc_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = vsc_sata_scr_read, @@ -394,7 +396,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d probe_ent->sht = &vsc_sata_sht; probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET; + ATA_FLAG_MMIO; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; From fe7fa31aa0749d7d247d21e1880f0c5aea15b158 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 22 Jun 2006 23:05:36 -0400 Subject: [PATCH 250/258] [libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index e261b37c2e48..82ecdef0c48b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -285,6 +285,7 @@ static const struct ata_port_info ahci_port_info[] = { }; static const struct pci_device_id ahci_pci_tbl[] = { + /* Intel */ { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ICH6 */ { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -315,16 +316,33 @@ static const struct pci_device_id ahci_pci_tbl[] = { board_ahci }, /* ICH8M */ { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ICH8M */ + + /* JMicron */ { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* JMicron JMB360 */ { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* JMicron JMB363 */ + + /* ATI */ { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ATI SB600 non-raid */ { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ATI SB600 raid */ + + /* VIA */ { PCI_VENDOR_ID_VIA, 0x3349, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci_vt8251 }, /* VIA VT8251 */ + + /* NVIDIA */ + { PCI_VENDOR_ID_NVIDIA, 0x044c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { } /* terminate list */ }; From c57c064994f1544a5ed2e9b319ebd0bc087ea540 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 22 Jun 2006 23:12:24 -0400 Subject: [PATCH 251/258] [libata] sata_nv: add PCI IDs Based on a patch contributed by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index be8650f17020..d18e7e0932ef 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -135,6 +135,10 @@ static const struct pci_device_id nv_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, From 8fa29b23d9e0ef976dc578aab98297d4f24f70da Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 22 Jun 2006 23:19:15 -0400 Subject: [PATCH 252/258] [libata] ahci: add JMicron PCI IDs Originally contributed by Justin @ JMicron. Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 82ecdef0c48b..df779ba8749d 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -320,8 +320,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* JMicron */ { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* JMicron JMB360 */ + { 0x197b, 0x2361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB361 */ { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* JMicron JMB363 */ + { 0x197b, 0x2365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB365 */ + { 0x197b, 0x2366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB366 */ /* ATI */ { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0, From 71f0737b2889b86f774a94afaf1342c2c0d61cb5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 21 Jun 2006 23:12:48 +0900 Subject: [PATCH 253/258] [PATCH] ahci: disable NCQ support on vt8251 vt8251 chokes on NCQ commands. Two different disks from different vendors are showing the same symptom and it seems that the windows driver from via doesn't support NCQ either. Disable NCQ support on this controller for the time being. Signed-off-by: Tejun Heo Cc: Aalderd Bouwman Cc: Bastiaan Jacques Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index df779ba8749d..4bb77f62b3b9 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -164,6 +164,7 @@ enum { /* ap->flags bits */ AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), + AHCI_FLAG_NO_NCQ = (1 << 25), }; struct ahci_cmd_hdr { @@ -277,7 +278,7 @@ static const struct ata_port_info ahci_port_info[] = { .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_SKIP_D2H_BSY | - AHCI_FLAG_RESET_NEEDS_CLO, + AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, @@ -1386,7 +1387,8 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_hpriv; - if (hpriv->cap & HOST_CAP_NCQ) + if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && + (hpriv->cap & HOST_CAP_NCQ)) probe_ent->host_flags |= ATA_FLAG_NCQ; ahci_print_info(probe_ent); From 3a778275626c0eb97674e92875efeba01189ce0e Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 22 Jun 2006 13:00:25 +0800 Subject: [PATCH 254/258] [PATCH] libata-dev: move the CDB-intr DMA blacklisting Move the DMA blacklisting of the CDB-intr devices from ata_check_atapi_dma() to ata_dma_blacklisted(), where it makes more sense. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index df483adc3f75..425ab1493fd3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2943,6 +2943,14 @@ static int ata_dma_blacklisted(const struct ata_device *dev) unsigned int nlen, rlen; int i; + /* We don't support polling DMA. + * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) + * if the LLDD handles only interrupts in the HSM_ST_LAST state. + */ + if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && + (dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, @@ -3235,15 +3243,6 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) if (ap->ops->check_atapi_dma) rc = ap->ops->check_atapi_dma(qc); - /* We don't support polling DMA. - * Use PIO if the LLDD handles only interrupts in - * the HSM_ST_LAST state and the ATAPI device - * generates CDB interrupts. - */ - if ((ap->flags & ATA_FLAG_PIO_POLLING) && - (qc->dev->flags & ATA_DFLAG_CDB_INTR)) - rc = 1; - return rc; } /** @@ -4551,7 +4550,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI_DMA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_check_atapi_dma() */ + /* see ata_dma_blacklisted() */ BUG(); break; default: From 47005f255ed126a4b48a1a2f63164fb1d83bcb0a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 Jun 2006 18:27:23 +0900 Subject: [PATCH 255/258] [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[] Currently, the only per-dev EH action is REVALIDATE. EH used to exploit ehi->dev to do selective revalidation on a ATA bus. However, this is a bit hacky and makes it impossible to request selective revalidation from outside of EH or add another per-dev EH action. This patch adds per-dev EH action mask eh_info->dev_action[] and update EH to use this field for REVALIDATE. Note that per-dev actions can still be specified at port-level and it has the same effect of specifying the action for all devices on the port. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 87 ++++++++++++++++++++++++++++++++-------- include/linux/libata.h | 2 + 2 files changed, 72 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 531a4e11c078..70b623988a9f 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -706,9 +706,35 @@ static void ata_eh_detach_dev(struct ata_device *dev) spin_unlock_irqrestore(&ap->host_set->lock, flags); } +static void ata_eh_clear_action(struct ata_device *dev, + struct ata_eh_info *ehi, unsigned int action) +{ + int i; + + if (!dev) { + ehi->action &= ~action; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehi->dev_action[i] &= ~action; + } else { + /* doesn't make sense for port-wide EH actions */ + WARN_ON(!(action & ATA_EH_PERDEV_MASK)); + + /* break ehi->action into ehi->dev_action */ + if (ehi->action & action) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehi->dev_action[i] |= ehi->action & action; + ehi->action &= ~action; + } + + /* turn off the specified per-dev action */ + ehi->dev_action[dev->devno] &= ~action; + } +} + /** * ata_eh_about_to_do - about to perform eh_action * @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) * @action: action about to be performed * * Called just before performing EH actions to clear related bits @@ -718,16 +744,35 @@ static void ata_eh_detach_dev(struct ata_device *dev) * LOCKING: * None. */ -static void ata_eh_about_to_do(struct ata_port *ap, unsigned int action) +static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, + unsigned int action) { unsigned long flags; spin_lock_irqsave(&ap->host_set->lock, flags); - ap->eh_info.action &= ~action; + ata_eh_clear_action(dev, &ap->eh_info, action); ap->flags |= ATA_FLAG_RECOVERED; spin_unlock_irqrestore(&ap->host_set->lock, flags); } +/** + * ata_eh_done - EH action complete + * @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action just completed + * + * Called right after performing EH actions to clear related bits + * in @ap->eh_context. + * + * LOCKING: + * None. + */ +static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, + unsigned int action) +{ + ata_eh_clear_action(dev, &ap->eh_context.i, action); +} + /** * ata_err_string - convert err_mask to descriptive string * @err_mask: error mask to convert to string @@ -1271,10 +1316,6 @@ static void ata_eh_autopsy(struct ata_port *ap) is_io = 1; } - /* speed down iff command was in progress */ - if (failed_dev) - action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); - /* enforce default EH actions */ if (ap->flags & ATA_FLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) @@ -1282,6 +1323,17 @@ static void ata_eh_autopsy(struct ata_port *ap) else if (all_err_mask) action |= ATA_EH_REVALIDATE; + /* if we have offending qcs and the associated failed device */ + if (failed_dev) { + /* speed down */ + action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); + + /* perform per-dev EH action only on the offending device */ + ehc->i.dev_action[failed_dev->devno] |= + action & ATA_EH_PERDEV_MASK; + action &= ~ATA_EH_PERDEV_MASK; + } + /* record autopsy result */ ehc->i.dev = failed_dev; ehc->i.action = action; @@ -1457,7 +1509,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, reset == softreset ? "soft" : "hard"); /* reset */ - ata_eh_about_to_do(ap, ATA_EH_RESET_MASK); + ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); ehc->i.flags |= ATA_EHI_DID_RESET; rc = ata_do_reset(ap, reset, classes); @@ -1476,7 +1528,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, return -EINVAL; } - ata_eh_about_to_do(ap, ATA_EH_RESET_MASK); + ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); rc = ata_do_reset(ap, reset, classes); if (rc == 0 && classify && @@ -1520,8 +1572,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, postreset(ap, classes); /* reset successful, schedule revalidation */ - ehc->i.dev = NULL; - ehc->i.action &= ~ATA_EH_RESET_MASK; + ata_eh_done(ap, NULL, ATA_EH_RESET_MASK); ehc->i.action |= ATA_EH_REVALIDATE; } @@ -1539,21 +1590,25 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, DPRINTK("ENTER\n"); for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; + unsigned int action; - if (ehc->i.action & ATA_EH_REVALIDATE && ata_dev_enabled(dev) && - (!ehc->i.dev || ehc->i.dev == dev)) { + dev = &ap->device[i]; + action = ehc->i.action | ehc->i.dev_action[dev->devno]; + + if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) { if (ata_port_offline(ap)) { rc = -EIO; break; } - ata_eh_about_to_do(ap, ATA_EH_REVALIDATE); + ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); rc = ata_dev_revalidate(dev, ehc->i.flags & ATA_EHI_DID_RESET); if (rc) break; + ata_eh_done(ap, dev, ATA_EH_REVALIDATE); + /* schedule the scsi_rescan_device() here */ queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); } else if (dev->class == ATA_DEV_UNKNOWN && @@ -1576,9 +1631,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, } } - if (rc == 0) - ehc->i.action &= ~ATA_EH_REVALIDATE; - else + if (rc) *r_failed_dev = dev; DPRINTK("EXIT\n"); diff --git a/include/linux/libata.h b/include/linux/libata.h index f03b8664af11..6b3c3af2c75f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -249,6 +249,7 @@ enum { ATA_EH_HARDRESET = (1 << 2), ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ @@ -462,6 +463,7 @@ struct ata_eh_info { u32 serror; /* SError from LLDD */ unsigned int err_mask; /* port-wide err_mask */ unsigned int action; /* ATA_EH_* action mask */ + unsigned int dev_action[ATA_MAX_DEVICES]; /* dev EH action */ unsigned int flags; /* ATA_EHI_* flags */ unsigned long hotplug_timestamp; From ba6a13083c1b720a47c05bee7bedbb6ef06c4611 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 22 Jun 2006 23:46:10 -0400 Subject: [PATCH 256/258] [libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King (with slight merge modifications made by...) Signed-off-by: Jeff Garzik --- drivers/scsi/libata-bmdma.c | 5 ++- drivers/scsi/libata-core.c | 55 ++++++++++++++++--------------- drivers/scsi/libata-eh.c | 65 ++++++++++++++++++------------------- drivers/scsi/libata-scsi.c | 20 ++++++------ include/linux/libata.h | 1 + 5 files changed, 73 insertions(+), 73 deletions(-) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 13fab97c840e..004e1a0d8b71 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -715,7 +715,6 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - struct ata_host_set *host_set = ap->host_set; struct ata_eh_context *ehc = &ap->eh_context; struct ata_queued_cmd *qc; unsigned long flags; @@ -726,7 +725,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, qc = NULL; /* reset PIO HSM and stop DMA engine */ - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->hsm_task_state = HSM_ST_IDLE; @@ -755,7 +754,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_chk_status(ap); ap->ops->irq_clear(ap); - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); if (thaw) ata_eh_thaw_port(ap); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 425ab1493fd3..24d340aeb518 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -933,9 +933,9 @@ void ata_port_flush_task(struct ata_port *ap) DPRINTK("ENTER\n"); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); DPRINTK("flush #1\n"); flush_workqueue(ata_wq); @@ -950,9 +950,9 @@ void ata_port_flush_task(struct ata_port *ap) flush_workqueue(ata_wq); } - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); DPRINTK("EXIT\n"); } @@ -999,11 +999,11 @@ unsigned ata_exec_internal(struct ata_device *dev, unsigned int err_mask; int rc; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); /* no internal command while frozen */ if (ap->flags & ATA_FLAG_FROZEN) { - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); return AC_ERR_SYSTEM; } @@ -1052,14 +1052,14 @@ unsigned ata_exec_internal(struct ata_device *dev, ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); rc = wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL); ata_port_flush_task(ap); if (!rc) { - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); /* We're racing with irq here. If we lose, the * following test prevents us from completing the qc @@ -1078,7 +1078,7 @@ unsigned ata_exec_internal(struct ata_device *dev, "qc timeout (cmd 0x%x)\n", command); } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } /* do post_internal_cmd */ @@ -1092,7 +1092,7 @@ unsigned ata_exec_internal(struct ata_device *dev, } /* finish up */ - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); *tf = qc->result_tf; err_mask = qc->err_mask; @@ -1118,7 +1118,7 @@ unsigned ata_exec_internal(struct ata_device *dev, ata_port_probe(ap); } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); return err_mask; } @@ -3912,7 +3912,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) if (ap->ops->error_handler) { if (in_wq) { - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); /* EH might have kicked in while host_set lock * is released. @@ -3926,7 +3926,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) ata_port_freeze(ap); } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } else { if (likely(!(qc->err_mask & AC_ERR_HSM))) ata_qc_complete(qc); @@ -3935,10 +3935,10 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) } } else { if (in_wq) { - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ata_irq_on(ap); ata_qc_complete(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } else ata_qc_complete(qc); } @@ -4018,7 +4018,7 @@ int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, * hsm_task_state is changed. Hence, the following locking. */ if (in_wq) - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); if (qc->tf.protocol == ATA_PROT_PIO) { /* PIO data out protocol. @@ -4037,7 +4037,7 @@ int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, atapi_send_cdb(ap, qc); if (in_wq) - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); /* if polling, ata_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. @@ -5130,9 +5130,9 @@ void ata_dev_init(struct ata_device *dev) * requests which occur asynchronously. Synchronize using * host_set lock. */ - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_INIT_MASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); @@ -5167,6 +5167,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, host->unique_id = ata_unique_id++; host->max_cmd_len = 12; + ap->lock = &host_set->lock; ap->flags = ATA_FLAG_DISABLED; ap->id = host->unique_id; ap->host = host; @@ -5388,7 +5389,7 @@ int ata_device_add(const struct ata_probe_ent *ent) ata_port_probe(ap); /* kick EH for boot probing */ - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; ap->eh_info.action |= ATA_EH_SOFTRESET; @@ -5396,7 +5397,7 @@ int ata_device_add(const struct ata_probe_ent *ent) ap->flags |= ATA_FLAG_LOADING; ata_port_schedule_eh(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); /* wait for EH to finish */ ata_port_wait_eh(ap); @@ -5460,29 +5461,29 @@ void ata_port_detach(struct ata_port *ap) return; /* tell EH we're leaving & flush EH */ - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags |= ATA_FLAG_UNLOADING; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); /* EH is now guaranteed to see UNLOADING, so no new device * will be attached. Disable all existing devices. */ - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); for (i = 0; i < ATA_MAX_DEVICES; i++) ata_dev_disable(&ap->device[i]); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); /* Final freeze & EH. All in-flight commands are aborted. EH * will be skipped and retrials will be terminated with bad * target. */ - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ata_port_freeze(ap); /* won't be thawed */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 70b623988a9f..823385981a7a 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -128,7 +128,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) } ret = EH_HANDLED; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); if (qc) { WARN_ON(qc->scsicmd != cmd); @@ -136,7 +136,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) qc->err_mask |= AC_ERR_TIMEOUT; ret = EH_NOT_HANDLED; } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); out: DPRINTK("EXIT, ret=%d\n", ret); @@ -158,7 +158,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) void ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap = ata_shost_to_port(host); - spinlock_t *hs_lock = &ap->host_set->lock; + spinlock_t *ap_lock = ap->lock; int i, repeat_cnt = ATA_EH_MAX_REPEAT; unsigned long flags; @@ -185,7 +185,7 @@ void ata_scsi_error(struct Scsi_Host *host) struct scsi_cmnd *scmd, *tmp; int nr_timedout = 0; - spin_lock_irqsave(hs_lock, flags); + spin_lock_irqsave(ap_lock, flags); list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -224,15 +224,15 @@ void ata_scsi_error(struct Scsi_Host *host) if (nr_timedout) __ata_port_freeze(ap); - spin_unlock_irqrestore(hs_lock, flags); + spin_unlock_irqrestore(ap_lock, flags); } else - spin_unlock_wait(hs_lock); + spin_unlock_wait(ap_lock); repeat: /* invoke error handler */ if (ap->ops->error_handler) { /* fetch & clear EH info */ - spin_lock_irqsave(hs_lock, flags); + spin_lock_irqsave(ap_lock, flags); memset(&ap->eh_context, 0, sizeof(ap->eh_context)); ap->eh_context.i = ap->eh_info; @@ -241,7 +241,7 @@ void ata_scsi_error(struct Scsi_Host *host) ap->flags |= ATA_FLAG_EH_IN_PROGRESS; ap->flags &= ~ATA_FLAG_EH_PENDING; - spin_unlock_irqrestore(hs_lock, flags); + spin_unlock_irqrestore(ap_lock, flags); /* invoke EH. if unloading, just finish failed qcs */ if (!(ap->flags & ATA_FLAG_UNLOADING)) @@ -253,14 +253,14 @@ void ata_scsi_error(struct Scsi_Host *host) * recovered the port but before this point. Repeat * EH in such case. */ - spin_lock_irqsave(hs_lock, flags); + spin_lock_irqsave(ap_lock, flags); if (ap->flags & ATA_FLAG_EH_PENDING) { if (--repeat_cnt) { ata_port_printk(ap, KERN_INFO, "EH pending after completion, " "repeating EH (cnt=%d)\n", repeat_cnt); - spin_unlock_irqrestore(hs_lock, flags); + spin_unlock_irqrestore(ap_lock, flags); goto repeat; } ata_port_printk(ap, KERN_ERR, "EH pending after %d " @@ -270,14 +270,14 @@ void ata_scsi_error(struct Scsi_Host *host) /* this run is complete, make sure EH info is clear */ memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - /* Clear host_eh_scheduled while holding hs_lock such + /* Clear host_eh_scheduled while holding ap_lock such * that if exception occurs after this point but * before EH completion, SCSI midlayer will * re-initiate EH. */ host->host_eh_scheduled = 0; - spin_unlock_irqrestore(hs_lock, flags); + spin_unlock_irqrestore(ap_lock, flags); } else { WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); ap->ops->eng_timeout(ap); @@ -289,7 +289,7 @@ void ata_scsi_error(struct Scsi_Host *host) scsi_eh_flush_done_q(&ap->eh_done_q); /* clean up */ - spin_lock_irqsave(hs_lock, flags); + spin_lock_irqsave(ap_lock, flags); if (ap->flags & ATA_FLAG_LOADING) { ap->flags &= ~ATA_FLAG_LOADING; @@ -306,7 +306,7 @@ void ata_scsi_error(struct Scsi_Host *host) ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; wake_up_all(&ap->eh_wait_q); - spin_unlock_irqrestore(hs_lock, flags); + spin_unlock_irqrestore(ap_lock, flags); DPRINTK("EXIT\n"); } @@ -326,17 +326,17 @@ void ata_port_wait_eh(struct ata_port *ap) DEFINE_WAIT(wait); retry: - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) { prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); schedule(); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); } finish_wait(&ap->eh_wait_q, &wait); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); /* make sure SCSI EH is complete */ if (scsi_host_in_recovery(ap->host)) { @@ -368,7 +368,6 @@ void ata_port_wait_eh(struct ata_port *ap) static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; u8 host_stat = 0, drv_stat; unsigned long flags; @@ -376,7 +375,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_IDLE; - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); switch (qc->tf.protocol) { @@ -405,7 +404,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) break; } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); ata_eh_qc_complete(qc); @@ -592,9 +591,9 @@ void ata_eh_freeze_port(struct ata_port *ap) if (!ap->ops->error_handler) return; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); __ata_port_freeze(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } /** @@ -613,14 +612,14 @@ void ata_eh_thaw_port(struct ata_port *ap) if (!ap->ops->error_handler) return; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags &= ~ATA_FLAG_FROZEN; if (ap->ops->thaw) ap->ops->thaw(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); DPRINTK("ata%u port thawed\n", ap->id); } @@ -636,11 +635,11 @@ static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) struct scsi_cmnd *scmd = qc->scsicmd; unsigned long flags; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); qc->scsidone = ata_eh_scsidone; __ata_qc_complete(qc); WARN_ON(ata_tag_valid(qc->tag)); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); scsi_eh_finish_cmd(scmd, &ap->eh_done_q); } @@ -694,7 +693,7 @@ static void ata_eh_detach_dev(struct ata_device *dev) ata_dev_disable(dev); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_DETACH; @@ -703,7 +702,7 @@ static void ata_eh_detach_dev(struct ata_device *dev) ap->flags |= ATA_FLAG_SCSI_HOTPLUG; } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } static void ata_eh_clear_action(struct ata_device *dev, @@ -749,10 +748,10 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, { unsigned long flags; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ata_eh_clear_action(dev, &ap->eh_info, action); ap->flags |= ATA_FLAG_RECOVERED; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } /** @@ -1625,9 +1624,9 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, break; } - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags |= ATA_FLAG_SCSI_HOTPLUG; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 9698949fa52a..d86abed62007 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -752,7 +752,7 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev) if (!ap->ops->error_handler) return; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); dev = __ata_scsi_find_dev(ap, sdev); if (dev && dev->sdev) { /* SCSI device already in CANCEL state, no need to offline it */ @@ -760,7 +760,7 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev) dev->flags |= ATA_DFLAG_DETACH; ata_port_schedule_eh(ap); } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } /** @@ -2684,7 +2684,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) ap = ata_shost_to_port(shost); spin_unlock(shost->host_lock); - spin_lock(&ap->host_set->lock); + spin_lock(ap->lock); ata_scsi_dump_cdb(ap, cmd); @@ -2696,7 +2696,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) done(cmd); } - spin_unlock(&ap->host_set->lock); + spin_unlock(ap->lock); spin_lock(shost->host_lock); return rc; } @@ -2858,7 +2858,7 @@ static void ata_scsi_remove_dev(struct ata_device *dev) * increments reference counts regardless of device state. */ mutex_lock(&ap->host->scan_mutex); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); /* clearing dev->sdev is protected by host_set lock */ sdev = dev->sdev; @@ -2882,7 +2882,7 @@ static void ata_scsi_remove_dev(struct ata_device *dev) } } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); mutex_unlock(&ap->host->scan_mutex); if (sdev) { @@ -2926,9 +2926,9 @@ void ata_scsi_hotplug(void *data) if (!(dev->flags & ATA_DFLAG_DETACHED)) continue; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_DETACHED; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); ata_scsi_remove_dev(dev); } @@ -2981,7 +2981,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, (lun != SCAN_WILD_CARD && lun != 0)) return -EINVAL; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); if (id == SCAN_WILD_CARD) { ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; @@ -2999,7 +2999,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, if (rc == 0) ata_port_schedule_eh(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); return rc; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 6b3c3af2c75f..20b1cf527c60 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -483,6 +483,7 @@ struct ata_eh_context { struct ata_port { struct Scsi_Host *host; /* our co-allocated scsi host */ const struct ata_port_operations *ops; + spinlock_t *lock; unsigned long flags; /* ATA_FLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ From 99ba9e093d058f6dff54f475136018e2e281d50f Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 12 Jun 2006 14:54:17 -0500 Subject: [PATCH 257/258] [PATCH] libata: Add ata_scsi_dev_disabled Separate out parts of ata_scsi_find_dev to be reused in future SAS/SATA patches. Acked-by: Jeff Garzik Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 41 ++++++++++++++++++++++++++++---------- 1 file changed, 31 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index d86abed62007..93d18a74c401 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2373,6 +2373,36 @@ static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, return ata_find_dev(ap, scsidev->id); } +/** + * ata_scsi_dev_enabled - determine if device is enabled + * @dev: ATA device + * + * Determine if commands should be sent to the specified device. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 if commands are not allowed / 1 if commands are allowed + */ + +static int ata_scsi_dev_enabled(struct ata_device *dev) +{ + if (unlikely(!ata_dev_enabled(dev))) + return 0; + + if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { + if (unlikely(dev->class == ATA_DEV_ATAPI)) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" : "disabled"); + return 0; + } + } + + return 1; +} + /** * ata_scsi_find_dev - lookup ata_device from scsi_cmnd * @ap: ATA port to which the device is attached @@ -2394,18 +2424,9 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); - if (unlikely(!dev || !ata_dev_enabled(dev))) + if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) return NULL; - if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) { - if (unlikely(dev->class == ATA_DEV_ATAPI)) { - ata_dev_printk(dev, KERN_WARNING, - "WARNING: ATAPI is %s, device ignored.\n", - atapi_enabled ? "not supported with this driver" : "disabled"); - return NULL; - } - } - return dev; } From 0dd4b21f517e138ea113db255645fbae1bf5eef3 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 23 Jun 2006 02:29:08 -0400 Subject: [PATCH 258/258] [libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 73 ++++++++++++++++++++++++-------------- 1 file changed, 47 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 24d340aeb518..6c66877be2bf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -418,7 +418,7 @@ static const char *sata_spd_string(unsigned int spd) void ata_dev_disable(struct ata_device *dev) { - if (ata_dev_enabled(dev)) { + if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { ata_dev_printk(dev, KERN_WARNING, "disabled\n"); dev->class++; } @@ -777,8 +777,11 @@ void ata_std_dev_select (struct ata_port *ap, unsigned int device) void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep) { - VPRINTK("ENTER, ata%u: device %u, wait %u\n", - ap->id, device, wait); + if (ata_msg_probe(ap)) { + ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " + "device %u, wait %u\n", + ap->id, device, wait); + } if (wait) ata_wait_idle(ap); @@ -946,7 +949,8 @@ void ata_port_flush_task(struct ata_port *ap) * Cancel and flush. */ if (!cancel_delayed_work(&ap->port_task)) { - DPRINTK("flush #2\n"); + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", __FUNCTION__); flush_workqueue(ata_wq); } @@ -954,7 +958,8 @@ void ata_port_flush_task(struct ata_port *ap) ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(ap->lock, flags); - DPRINTK("EXIT\n"); + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); } void ata_qc_complete_internal(struct ata_queued_cmd *qc) @@ -1074,7 +1079,8 @@ unsigned ata_exec_internal(struct ata_device *dev, else ata_qc_complete(qc); - ata_dev_printk(dev, KERN_WARNING, + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, "qc timeout (cmd 0x%x)\n", command); } @@ -1086,7 +1092,9 @@ unsigned ata_exec_internal(struct ata_device *dev, ap->ops->post_internal_cmd(qc); if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { - ata_dev_printk(dev, KERN_WARNING, "zero err_mask for failed " + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "zero err_mask for failed " "internal command, assuming AC_ERR_OTHER\n"); qc->err_mask |= AC_ERR_OTHER; } @@ -1184,7 +1192,9 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, const char *reason; int rc; - DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + if (ata_msg_ctl(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ @@ -1253,7 +1263,8 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, return 0; err_out: - ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " "(%s, err_mask=0x%x)\n", reason, err_mask); return rc; } @@ -1306,18 +1317,21 @@ int ata_dev_configure(struct ata_device *dev, int print_info) unsigned int xfer_mask; int i, rc; - if (!ata_dev_enabled(dev)) { - DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", - ap->id, dev->devno); + if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { + ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", + __FUNCTION__, ap->id, dev->devno); return 0; } - DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); /* print device capabilities */ - if (print_info) - ata_dev_printk(dev, KERN_DEBUG, "cfg 49:%04x 82:%04x 83:%04x " + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: cfg 49:%04x 82:%04x 83:%04x " "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", + __FUNCTION__, id[49], id[82], id[83], id[84], id[85], id[86], id[87], id[88]); @@ -1337,7 +1351,8 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* find max transfer mode; for printk only */ xfer_mask = ata_id_xfermask(id); - ata_dump_id(id); + if (ata_msg_probe(ap)) + ata_dump_id(id); /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { @@ -1358,7 +1373,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); /* print device info to dmesg */ - if (print_info) + if (ata_msg_info(ap)) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " "max %s, %Lu sectors: %s %s\n", ata_id_major_version(id), @@ -1381,7 +1396,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) } /* print device info to dmesg */ - if (print_info) + if (ata_msg_info(ap)) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " "max %s, %Lu sectors: CHS %u/%u/%u\n", ata_id_major_version(id), @@ -1392,7 +1407,8 @@ int ata_dev_configure(struct ata_device *dev, int print_info) if (dev->id[59] & 0x100) { dev->multi_count = dev->id[59] & 0xff; - DPRINTK("ata%u: dev %u multi count %u\n", + if (ata_msg_info(ap)) + ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n", ap->id, dev->devno, dev->multi_count); } @@ -1405,8 +1421,9 @@ int ata_dev_configure(struct ata_device *dev, int print_info) rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { - ata_dev_printk(dev, KERN_WARNING, - "unsupported CDB len\n"); + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "unsupported CDB len\n"); rc = -EINVAL; goto err_out_nosup; } @@ -1418,7 +1435,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) } /* print device info to dmesg */ - if (print_info) + if (ata_msg_info(ap)) ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", ata_mode_string(xfer_mask), cdb_intr_string); @@ -1432,7 +1449,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { - if (print_info) + if (ata_msg_info(ap)) ata_dev_printk(dev, KERN_INFO, "applying bridge limits\n"); dev->udma_mask &= ATA_UDMA5; @@ -1442,11 +1459,15 @@ int ata_dev_configure(struct ata_device *dev, int print_info) if (ap->ops->dev_config) ap->ops->dev_config(ap, dev); - DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", + __FUNCTION__, ata_chk_status(ap)); return 0; err_out_nosup: - DPRINTK("EXIT, err\n"); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: EXIT, err\n", __FUNCTION__); return rc; } @@ -5192,7 +5213,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, #elif defined(ATA_DEBUG) ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; #else - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR; + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; #endif INIT_WORK(&ap->port_task, NULL, NULL);