Merge branch 'topic/fsl' into for-linus

Documentation/devicetree/bindings/dma/fsl-qdma.txt

@@ -0,0 +1,57 @@
+NXP Layerscape SoC qDMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible:		Must be one of
+			 "fsl,ls1021a-qdma": for LS1021A Board
+			 "fsl,ls1043a-qdma": for ls1043A Board
+			 "fsl,ls1046a-qdma": for ls1046A Board
+- reg:			Should contain the register's base address and length.
+- interrupts:		Should contain a reference to the interrupt used by this
+			device.
+- interrupt-names:	Should contain interrupt names:
+			 "qdma-queue0": the block0 interrupt
+			 "qdma-queue1": the block1 interrupt
+			 "qdma-queue2": the block2 interrupt
+			 "qdma-queue3": the block3 interrupt
+			 "qdma-error":  the error interrupt
+- fsl,dma-queues:	Should contain number of queues supported.
+- dma-channels:	Number of DMA channels supported
+- block-number:	the virtual block number
+- block-offset:	the offset of different virtual block
+- status-sizes:	status queue size of per virtual block
+- queue-sizes:		command queue size of per virtual block, the size number
+			based on queues
+
+Optional properties:
+
+- dma-channels:		Number of DMA channels supported by the controller.
+- big-endian:		If present registers and hardware scatter/gather descriptors
+			of the qDMA are implemented in big endian mode, otherwise in little
+			mode.
+
+Examples:
+
+	qdma: dma-controller@8390000 {
+			compatible = "fsl,ls1021a-qdma";
+			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error",
+				"qdma-queue0", "qdma-queue1";
+			dma-channels = <8>;
+			block-number = <2>;
+			block-offset = <0x1000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+DMA clients must use the format described in dma/dma.txt file.

drivers/dma/Kconfig

@@ -218,6 +218,20 @@ config FSL_EDMA
 	  multiplexing capability for DMA request sources(slot).
 	  This module can be found on Freescale Vybrid and LS-1 SoCs.
 
+config FSL_QDMA
+       tristate "NXP Layerscape qDMA engine support"
+       depends on ARM || ARM64
+       select DMA_ENGINE
+       select DMA_VIRTUAL_CHANNELS
+       select DMA_ENGINE_RAID
+       select ASYNC_TX_ENABLE_CHANNEL_SWITCH
+       help
+         Support the NXP Layerscape qDMA engine with command queue and legacy mode.
+         Channel virtualization is supported through enqueuing of DMA jobs to,
+         or dequeuing DMA jobs from, different work queues.
+         This module can be found on NXP Layerscape SoCs.
+	  The qdma driver only work on  SoCs with a DPAA hardware block.
+
 config FSL_RAID
         tristate "Freescale RAID engine Support"
         depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH

drivers/dma/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
 obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
+obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
 obj-$(CONFIG_FSL_RAID) += fsl_raid.o
 obj-$(CONFIG_HSU_DMA) += hsu/
 obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o

drivers/dma/fsl-edma-common.c

@@ -6,6 +6,7 @@
 #include <linux/dmapool.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include "fsl-edma-common.h"
 
@@ -173,12 +174,62 @@ int fsl_edma_resume(struct dma_chan *chan)
 }
 EXPORT_SYMBOL_GPL(fsl_edma_resume);
 
+static void fsl_edma_unprep_slave_dma(struct fsl_edma_chan *fsl_chan)
+{
+	if (fsl_chan->dma_dir != DMA_NONE)
+		dma_unmap_resource(fsl_chan->vchan.chan.device->dev,
+				   fsl_chan->dma_dev_addr,
+				   fsl_chan->dma_dev_size,
+				   fsl_chan->dma_dir, 0);
+	fsl_chan->dma_dir = DMA_NONE;
+}
+
+static bool fsl_edma_prep_slave_dma(struct fsl_edma_chan *fsl_chan,
+				    enum dma_transfer_direction dir)
+{
+	struct device *dev = fsl_chan->vchan.chan.device->dev;
+	enum dma_data_direction dma_dir;
+	phys_addr_t addr = 0;
+	u32 size = 0;
+
+	switch (dir) {
+	case DMA_MEM_TO_DEV:
+		dma_dir = DMA_FROM_DEVICE;
+		addr = fsl_chan->cfg.dst_addr;
+		size = fsl_chan->cfg.dst_maxburst;
+		break;
+	case DMA_DEV_TO_MEM:
+		dma_dir = DMA_TO_DEVICE;
+		addr = fsl_chan->cfg.src_addr;
+		size = fsl_chan->cfg.src_maxburst;
+		break;
+	default:
+		dma_dir = DMA_NONE;
+		break;
+	}
+
+	/* Already mapped for this config? */
+	if (fsl_chan->dma_dir == dma_dir)
+		return true;
+
+	fsl_edma_unprep_slave_dma(fsl_chan);
+
+	fsl_chan->dma_dev_addr = dma_map_resource(dev, addr, size, dma_dir, 0);
+	if (dma_mapping_error(dev, fsl_chan->dma_dev_addr))
+		return false;
+	fsl_chan->dma_dev_size = size;
+	fsl_chan->dma_dir = dma_dir;
+
+	return true;
+}
+
 int fsl_edma_slave_config(struct dma_chan *chan,
 				 struct dma_slave_config *cfg)
 {
 	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
 
 	memcpy(&fsl_chan->cfg, cfg, sizeof(*cfg));
+	fsl_edma_unprep_slave_dma(fsl_chan);
 
 	return 0;
 }
@@ -339,9 +390,7 @@ static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
 	struct fsl_edma_desc *fsl_desc;
 	int i;
 
-	fsl_desc = kzalloc(sizeof(*fsl_desc) +
-			   sizeof(struct fsl_edma_sw_tcd) *
-			   sg_len, GFP_NOWAIT);
+	fsl_desc = kzalloc(struct_size(fsl_desc, tcd, sg_len), GFP_NOWAIT);
 	if (!fsl_desc)
 		return NULL;
 
@@ -378,6 +427,9 @@ struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
 	if (!is_slave_direction(direction))
 		return NULL;
 
+	if (!fsl_edma_prep_slave_dma(fsl_chan, direction))
+		return NULL;
+
 	sg_len = buf_len / period_len;
 	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
 	if (!fsl_desc)
@@ -409,11 +461,11 @@ struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
 
 		if (direction == DMA_MEM_TO_DEV) {
 			src_addr = dma_buf_next;
-			dst_addr = fsl_chan->cfg.dst_addr;
+			dst_addr = fsl_chan->dma_dev_addr;
 			soff = fsl_chan->cfg.dst_addr_width;
 			doff = 0;
 		} else {
-			src_addr = fsl_chan->cfg.src_addr;
+			src_addr = fsl_chan->dma_dev_addr;
 			dst_addr = dma_buf_next;
 			soff = 0;
 			doff = fsl_chan->cfg.src_addr_width;
@@ -444,6 +496,9 @@ struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
 	if (!is_slave_direction(direction))
 		return NULL;
 
+	if (!fsl_edma_prep_slave_dma(fsl_chan, direction))
+		return NULL;
+
 	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
 	if (!fsl_desc)
 		return NULL;
@@ -468,11 +523,11 @@ struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
 
 		if (direction == DMA_MEM_TO_DEV) {
 			src_addr = sg_dma_address(sg);
-			dst_addr = fsl_chan->cfg.dst_addr;
+			dst_addr = fsl_chan->dma_dev_addr;
 			soff = fsl_chan->cfg.dst_addr_width;
 			doff = 0;
 		} else {
-			src_addr = fsl_chan->cfg.src_addr;
+			src_addr = fsl_chan->dma_dev_addr;
 			dst_addr = sg_dma_address(sg);
 			soff = 0;
 			doff = fsl_chan->cfg.src_addr_width;
@@ -555,6 +610,7 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan)
 	fsl_edma_chan_mux(fsl_chan, 0, false);
 	fsl_chan->edesc = NULL;
 	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
+	fsl_edma_unprep_slave_dma(fsl_chan);
 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
 
 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);

drivers/dma/fsl-edma-common.h

@@ -6,6 +6,7 @@
 #ifndef _FSL_EDMA_COMMON_H_
 #define _FSL_EDMA_COMMON_H_
 
+#include <linux/dma-direction.h>
 #include "virt-dma.h"
 
 #define EDMA_CR_EDBG		BIT(1)
@@ -120,6 +121,9 @@ struct fsl_edma_chan {
 	struct dma_slave_config		cfg;
 	u32				attr;
 	struct dma_pool			*tcd_pool;
+	dma_addr_t			dma_dev_addr;
+	u32				dma_dev_size;
+	enum dma_data_direction		dma_dir;
 };
 
 struct fsl_edma_desc {

drivers/dma/fsl-edma.c

@@ -254,6 +254,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 		fsl_chan->pm_state = RUNNING;
 		fsl_chan->slave_id = 0;
 		fsl_chan->idle = true;
+		fsl_chan->dma_dir = DMA_NONE;
 		fsl_chan->vchan.desc_free = fsl_edma_free_desc;
 		vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);
 

drivers/dma/fsldma.c

@@ -53,42 +53,42 @@ static const char msg_ld_oom[] = "No free memory for link descriptor";
 
 static void set_sr(struct fsldma_chan *chan, u32 val)
 {
-	DMA_OUT(chan, &chan->regs->sr, val, 32);
+	FSL_DMA_OUT(chan, &chan->regs->sr, val, 32);
 }
 
 static u32 get_sr(struct fsldma_chan *chan)
 {
-	return DMA_IN(chan, &chan->regs->sr, 32);
+	return FSL_DMA_IN(chan, &chan->regs->sr, 32);
 }
 
 static void set_mr(struct fsldma_chan *chan, u32 val)
 {
-	DMA_OUT(chan, &chan->regs->mr, val, 32);
+	FSL_DMA_OUT(chan, &chan->regs->mr, val, 32);
 }
 
 static u32 get_mr(struct fsldma_chan *chan)
 {
-	return DMA_IN(chan, &chan->regs->mr, 32);
+	return FSL_DMA_IN(chan, &chan->regs->mr, 32);
 }
 
 static void set_cdar(struct fsldma_chan *chan, dma_addr_t addr)
 {
-	DMA_OUT(chan, &chan->regs->cdar, addr | FSL_DMA_SNEN, 64);
+	FSL_DMA_OUT(chan, &chan->regs->cdar, addr | FSL_DMA_SNEN, 64);
 }
 
 static dma_addr_t get_cdar(struct fsldma_chan *chan)
 {
-	return DMA_IN(chan, &chan->regs->cdar, 64) & ~FSL_DMA_SNEN;
+	return FSL_DMA_IN(chan, &chan->regs->cdar, 64) & ~FSL_DMA_SNEN;
 }
 
 static void set_bcr(struct fsldma_chan *chan, u32 val)
 {
-	DMA_OUT(chan, &chan->regs->bcr, val, 32);
+	FSL_DMA_OUT(chan, &chan->regs->bcr, val, 32);
 }
 
 static u32 get_bcr(struct fsldma_chan *chan)
 {
-	return DMA_IN(chan, &chan->regs->bcr, 32);
+	return FSL_DMA_IN(chan, &chan->regs->bcr, 32);
 }
 
 /*

drivers/dma/fsldma.h

@@ -196,39 +196,67 @@ struct fsldma_chan {
 #define to_fsl_desc(lh) container_of(lh, struct fsl_desc_sw, node)
 #define tx_to_fsl_desc(tx) container_of(tx, struct fsl_desc_sw, async_tx)
 
-#ifndef __powerpc64__
-static u64 in_be64(const u64 __iomem *addr)
+#ifdef	CONFIG_PPC
+#define fsl_ioread32(p)		in_le32(p)
+#define fsl_ioread32be(p)	in_be32(p)
+#define fsl_iowrite32(v, p)	out_le32(p, v)
+#define fsl_iowrite32be(v, p)	out_be32(p, v)
+
+#ifdef __powerpc64__
+#define fsl_ioread64(p)		in_le64(p)
+#define fsl_ioread64be(p)	in_be64(p)
+#define fsl_iowrite64(v, p)	out_le64(p, v)
+#define fsl_iowrite64be(v, p)	out_be64(p, v)
+#else
+static u64 fsl_ioread64(const u64 __iomem *addr)
 {
-	return ((u64)in_be32((u32 __iomem *)addr) << 32) |
-		(in_be32((u32 __iomem *)addr + 1));
+	u32 fsl_addr = lower_32_bits(addr);
+	u64 fsl_addr_hi = (u64)in_le32((u32 *)(fsl_addr + 1)) << 32;
+
+	return fsl_addr_hi | in_le32((u32 *)fsl_addr);
 }
 
-static void out_be64(u64 __iomem *addr, u64 val)
-{
-	out_be32((u32 __iomem *)addr, val >> 32);
-	out_be32((u32 __iomem *)addr + 1, (u32)val);
-}
-
-/* There is no asm instructions for 64 bits reverse loads and stores */
-static u64 in_le64(const u64 __iomem *addr)
-{
-	return ((u64)in_le32((u32 __iomem *)addr + 1) << 32) |
-		(in_le32((u32 __iomem *)addr));
-}
-
-static void out_le64(u64 __iomem *addr, u64 val)
+static void fsl_iowrite64(u64 val, u64 __iomem *addr)
 {
 	out_le32((u32 __iomem *)addr + 1, val >> 32);
 	out_le32((u32 __iomem *)addr, (u32)val);
 }
+
+static u64 fsl_ioread64be(const u64 __iomem *addr)
+{
+	u32 fsl_addr = lower_32_bits(addr);
+	u64 fsl_addr_hi = (u64)in_be32((u32 *)fsl_addr) << 32;
+
+	return fsl_addr_hi | in_be32((u32 *)(fsl_addr + 1));
+}
+
+static void fsl_iowrite64be(u64 val, u64 __iomem *addr)
+{
+	out_be32((u32 __iomem *)addr, val >> 32);
+	out_be32((u32 __iomem *)addr + 1, (u32)val);
+}
+#endif
 #endif
 
-#define DMA_IN(fsl_chan, addr, width)					\
-		(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ?		\
-			in_be##width(addr) : in_le##width(addr))
-#define DMA_OUT(fsl_chan, addr, val, width)				\
-		(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ?		\
-			out_be##width(addr, val) : out_le##width(addr, val))
+#if defined(CONFIG_ARM64) || defined(CONFIG_ARM)
+#define fsl_ioread32(p)		ioread32(p)
+#define fsl_ioread32be(p)	ioread32be(p)
+#define fsl_iowrite32(v, p)	iowrite32(v, p)
+#define fsl_iowrite32be(v, p)	iowrite32be(v, p)
+#define fsl_ioread64(p)		ioread64(p)
+#define fsl_ioread64be(p)	ioread64be(p)
+#define fsl_iowrite64(v, p)	iowrite64(v, p)
+#define fsl_iowrite64be(v, p)	iowrite64be(v, p)
+#endif
+
+#define FSL_DMA_IN(fsl_dma, addr, width)			\
+		(((fsl_dma)->feature & FSL_DMA_BIG_ENDIAN) ?	\
+			fsl_ioread##width##be(addr) : fsl_ioread##width(addr))
+
+#define FSL_DMA_OUT(fsl_dma, addr, val, width)			\
+		(((fsl_dma)->feature & FSL_DMA_BIG_ENDIAN) ?	\
+			fsl_iowrite##width##be(val, addr) : fsl_iowrite	\
+		##width(val, addr))
 
 #define DMA_TO_CPU(fsl_chan, d, width)					\
 		(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ?		\

drivers/dma/mcf-edma.c

@@ -214,6 +214,7 @@ static int mcf_edma_probe(struct platform_device *pdev)
 		mcf_chan->edma = mcf_edma;
 		mcf_chan->slave_id = i;
 		mcf_chan->idle = true;
+		mcf_chan->dma_dir = DMA_NONE;
 		mcf_chan->vchan.desc_free = fsl_edma_free_desc;
 		vchan_init(&mcf_chan->vchan, &mcf_edma->dma_dev);
 		iowrite32(0x0, &regs->tcd[i].csr);