xprtrdma: Honor ->send_request API contract

Commit c93c62231c ("xprtrdma: Disconnect on registration failure")
added a disconnect for some RPC marshaling failures. This is needed
only in a handful of cases, but it was triggering for simple stuff
like temporary resource shortages. Try to straighten this out.

Fix up the lower layers so they don't return -ENOMEM or other error
codes that the RPC client's FSM doesn't explicitly recognize.

Also fix up the places in the send_request path that do want a
disconnect. For example, when ib_post_send or ib_post_recv fail,
this is a sign that there is a send or receive queue resource
miscalculation. That should be rare, and is a sign of a software
bug. But xprtrdma can recover: disconnect to reset the transport and
start over.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This commit is contained in:
Chuck Lever 2016-06-29 13:53:43 -04:00 committed by Anna Schumaker
parent 3d4cf35bd4
commit 7a89f9c626
5 changed files with 39 additions and 24 deletions

View File

@ -219,7 +219,7 @@ fmr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
rpcrdma_defer_mr_recovery(mw);
mw = rpcrdma_get_mw(r_xprt);
if (!mw)
return -ENOMEM;
return -ENOBUFS;
pageoff = offset_in_page(seg1->mr_offset);
seg1->mr_offset -= pageoff; /* start of page */
@ -269,14 +269,14 @@ fmr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
pr_err("rpcrdma: failed to dma map sg %p sg_nents %u\n",
mw->mw_sg, mw->mw_nents);
rpcrdma_defer_mr_recovery(mw);
return -ENOMEM;
return -EIO;
out_maperr:
pr_err("rpcrdma: ib_map_phys_fmr %u@0x%llx+%i (%d) status %i\n",
len, (unsigned long long)dma_pages[0],
pageoff, mw->mw_nents, rc);
rpcrdma_defer_mr_recovery(mw);
return rc;
return -EIO;
}
/* Invalidate all memory regions that were registered for "req".

View File

@ -382,7 +382,7 @@ frwr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
rpcrdma_defer_mr_recovery(mw);
mw = rpcrdma_get_mw(r_xprt);
if (!mw)
return -ENOMEM;
return -ENOBUFS;
} while (mw->frmr.fr_state != FRMR_IS_INVALID);
frmr = &mw->frmr;
frmr->fr_state = FRMR_IS_VALID;
@ -456,18 +456,18 @@ frwr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
pr_err("rpcrdma: failed to dma map sg %p sg_nents %u\n",
mw->mw_sg, mw->mw_nents);
rpcrdma_defer_mr_recovery(mw);
return -ENOMEM;
return -EIO;
out_mapmr_err:
pr_err("rpcrdma: failed to map mr %p (%u/%u)\n",
frmr->fr_mr, n, mw->mw_nents);
rc = n < 0 ? n : -EIO;
rpcrdma_defer_mr_recovery(mw);
return rc;
return -EIO;
out_senderr:
pr_err("rpcrdma: FRMR registration ib_post_send returned %i\n", rc);
rpcrdma_defer_mr_recovery(mw);
return rc;
return -ENOTCONN;
}
static struct ib_send_wr *
@ -569,7 +569,8 @@ frwr_op_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
return;
reset_mrs:
pr_warn("%s: ib_post_send failed %i\n", __func__, rc);
pr_err("rpcrdma: FRMR invalidate ib_post_send returned %i\n", rc);
rdma_disconnect(ia->ri_id);
/* Find and reset the MRs in the LOCAL_INV WRs that did not
* get posted. This is synchronous, and slow.

View File

@ -251,7 +251,7 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, unsigned int pos,
/* alloc the pagelist for receiving buffer */
ppages[p] = alloc_page(GFP_ATOMIC);
if (!ppages[p])
return -ENOMEM;
return -EAGAIN;
}
seg[n].mr_page = ppages[p];
seg[n].mr_offset = (void *)(unsigned long) page_base;

View File

@ -558,7 +558,6 @@ xprt_rdma_allocate(struct rpc_task *task, size_t size)
out_fail:
rpcrdma_buffer_put(req);
r_xprt->rx_stats.failed_marshal_count++;
return NULL;
}
@ -590,8 +589,19 @@ xprt_rdma_free(void *buffer)
rpcrdma_buffer_put(req);
}
/*
/**
* xprt_rdma_send_request - marshal and send an RPC request
* @task: RPC task with an RPC message in rq_snd_buf
*
* Return values:
* 0: The request has been sent
* ENOTCONN: Caller needs to invoke connect logic then call again
* ENOBUFS: Call again later to send the request
* EIO: A permanent error occurred. The request was not sent,
* and don't try it again
*
* send_request invokes the meat of RPC RDMA. It must do the following:
*
* 1. Marshal the RPC request into an RPC RDMA request, which means
* putting a header in front of data, and creating IOVs for RDMA
* from those in the request.
@ -600,7 +610,6 @@ xprt_rdma_free(void *buffer)
* the request (rpcrdma_ep_post).
* 4. No partial sends are possible in the RPC-RDMA protocol (as in UDP).
*/
static int
xprt_rdma_send_request(struct rpc_task *task)
{
@ -630,11 +639,12 @@ xprt_rdma_send_request(struct rpc_task *task)
return 0;
failed_marshal:
r_xprt->rx_stats.failed_marshal_count++;
dprintk("RPC: %s: rpcrdma_marshal_req failed, status %i\n",
__func__, rc);
if (rc == -EIO)
return -EIO;
r_xprt->rx_stats.failed_marshal_count++;
if (rc != -ENOTCONN)
return rc;
drop_connection:
xprt_disconnect_done(xprt);
return -ENOTCONN; /* implies disconnect */

View File

@ -1151,7 +1151,7 @@ rpcrdma_ep_post(struct rpcrdma_ia *ia,
if (rep) {
rc = rpcrdma_ep_post_recv(ia, ep, rep);
if (rc)
goto out;
return rc;
req->rl_reply = NULL;
}
@ -1176,10 +1176,12 @@ rpcrdma_ep_post(struct rpcrdma_ia *ia,
rc = ib_post_send(ia->ri_id->qp, &send_wr, &send_wr_fail);
if (rc)
dprintk("RPC: %s: ib_post_send returned %i\n", __func__,
rc);
out:
return rc;
goto out_postsend_err;
return 0;
out_postsend_err:
pr_err("rpcrdma: RDMA Send ib_post_send returned %i\n", rc);
return -ENOTCONN;
}
/*
@ -1204,11 +1206,13 @@ rpcrdma_ep_post_recv(struct rpcrdma_ia *ia,
DMA_BIDIRECTIONAL);
rc = ib_post_recv(ia->ri_id->qp, &recv_wr, &recv_wr_fail);
if (rc)
dprintk("RPC: %s: ib_post_recv returned %i\n", __func__,
rc);
return rc;
goto out_postrecv;
return 0;
out_postrecv:
pr_err("rpcrdma: ib_post_recv returned %i\n", rc);
return -ENOTCONN;
}
/**