tridentfb: fix timing calculations
Fix broken timings calculations. This patch helps with following problems: - no left part of screen visible (up to half of the screen) - monitor's frequencies are not the ones intended for selected modes - if mode with resoultion y > 1024 is selected at least once then all modes with y < 1024 are "out of sync" (no display) Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
10172ed6dc
commit
7f762d23e6
@ -886,20 +886,19 @@ static int tridentfb_set_par(struct fb_info *info)
|
||||
|
||||
debug("enter\n");
|
||||
hdispend = var->xres / 8 - 1;
|
||||
hsyncstart = (var->xres + var->right_margin) / 8;
|
||||
hsyncend = var->hsync_len / 8;
|
||||
htotal =
|
||||
(var->xres + var->left_margin + var->right_margin +
|
||||
var->hsync_len) / 8 - 10;
|
||||
hblankstart = hdispend + 1;
|
||||
hblankend = htotal + 5;
|
||||
hsyncstart = (var->xres + var->right_margin) / 8 - 1;
|
||||
hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8 - 1;
|
||||
htotal = (var->xres + var->left_margin + var->right_margin +
|
||||
var->hsync_len) / 8 - 5;
|
||||
hblankstart = hdispend + 2;
|
||||
hblankend = htotal + 3;
|
||||
|
||||
vdispend = var->yres - 1;
|
||||
vsyncstart = var->yres + var->lower_margin;
|
||||
vsyncend = var->vsync_len;
|
||||
vtotal = var->upper_margin + vsyncstart + vsyncend - 2;
|
||||
vblankstart = var->yres;
|
||||
vblankend = vtotal + 2;
|
||||
vsyncend = vsyncstart + var->vsync_len;
|
||||
vtotal = var->upper_margin + vsyncend - 2;
|
||||
vblankstart = vdispend + 2;
|
||||
vblankend = vtotal;
|
||||
|
||||
crtc_unlock(par);
|
||||
write3CE(par, CyberControl, 8);
|
||||
@ -930,7 +929,7 @@ static int tridentfb_set_par(struct fb_info *info)
|
||||
write3X4(par, VGA_CRTC_V_SYNC_START, vsyncstart & 0xFF);
|
||||
write3X4(par, VGA_CRTC_V_SYNC_END, (vsyncend & 0x0F));
|
||||
write3X4(par, VGA_CRTC_V_BLANK_START, vblankstart & 0xFF);
|
||||
write3X4(par, VGA_CRTC_V_BLANK_END, 0 /* p->vblankend & 0xFF */);
|
||||
write3X4(par, VGA_CRTC_V_BLANK_END, vblankend & 0xFF);
|
||||
|
||||
/* horizontal timing values */
|
||||
write3X4(par, VGA_CRTC_H_TOTAL, htotal & 0xFF);
|
||||
@ -939,7 +938,7 @@ static int tridentfb_set_par(struct fb_info *info)
|
||||
write3X4(par, VGA_CRTC_H_SYNC_END,
|
||||
(hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
|
||||
write3X4(par, VGA_CRTC_H_BLANK_START, hblankstart & 0xFF);
|
||||
write3X4(par, VGA_CRTC_H_BLANK_END, 0 /* (p->hblankend & 0x1F) */);
|
||||
write3X4(par, VGA_CRTC_H_BLANK_END, hblankend & 0x1F);
|
||||
|
||||
/* higher bits of vertical timing values */
|
||||
tmp = 0x10;
|
||||
@ -953,16 +952,18 @@ static int tridentfb_set_par(struct fb_info *info)
|
||||
if (vsyncstart & 0x200) tmp |= 0x80;
|
||||
write3X4(par, VGA_CRTC_OVERFLOW, tmp);
|
||||
|
||||
tmp = read3X4(par, CRTHiOrd) | 0x08; /* line compare bit 10 */
|
||||
tmp = read3X4(par, CRTHiOrd) & 0x07;
|
||||
tmp |= 0x08; /* line compare bit 10 */
|
||||
if (vtotal & 0x400) tmp |= 0x80;
|
||||
if (vblankstart & 0x400) tmp |= 0x40;
|
||||
if (vsyncstart & 0x400) tmp |= 0x20;
|
||||
if (vdispend & 0x400) tmp |= 0x10;
|
||||
write3X4(par, CRTHiOrd, tmp);
|
||||
|
||||
tmp = 0;
|
||||
if (htotal & 0x800) tmp |= 0x800 >> 11;
|
||||
if (hblankstart & 0x800) tmp |= 0x800 >> 7;
|
||||
tmp = (htotal >> 8) & 0x01;
|
||||
tmp |= (hdispend >> 7) & 0x02;
|
||||
tmp |= (hsyncstart >> 5) & 0x08;
|
||||
tmp |= (hblankstart >> 4) & 0x10;
|
||||
write3X4(par, HorizOverflow, tmp);
|
||||
|
||||
tmp = 0x40;
|
||||
|
Loading…
Reference in New Issue
Block a user