regulator: documentation - overview
This adds overview documentation describing the regulator framework and nomenclature used in the interface specific documentation and code. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
This commit is contained in:
parent
ba7e476343
commit
8e6f0848be
171
Documentation/power/regulator/overview.txt
Normal file
171
Documentation/power/regulator/overview.txt
Normal file
|
@ -0,0 +1,171 @@
|
|||
Linux voltage and current regulator framework
|
||||
=============================================
|
||||
|
||||
About
|
||||
=====
|
||||
|
||||
This framework is designed to provide a standard kernel interface to control
|
||||
voltage and current regulators.
|
||||
|
||||
The intention is to allow systems to dynamically control regulator power output
|
||||
in order to save power and prolong battery life. This applies to both voltage
|
||||
regulators (where voltage output is controllable) and current sinks (where
|
||||
current limit is controllable).
|
||||
|
||||
(C) 2008 Wolfson Microelectronics PLC.
|
||||
Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||||
|
||||
|
||||
Nomenclature
|
||||
============
|
||||
|
||||
Some terms used in this document:-
|
||||
|
||||
o Regulator - Electronic device that supplies power to other devices.
|
||||
Most regulators can enable and disable their output whilst
|
||||
some can control their output voltage and or current.
|
||||
|
||||
Input Voltage -> Regulator -> Output Voltage
|
||||
|
||||
|
||||
o PMIC - Power Management IC. An IC that contains numerous regulators
|
||||
and often contains other susbsystems.
|
||||
|
||||
|
||||
o Consumer - Electronic device that is supplied power by a regulator.
|
||||
Consumers can be classified into two types:-
|
||||
|
||||
Static: consumer does not change it's supply voltage or
|
||||
current limit. It only needs to enable or disable it's
|
||||
power supply. It's supply voltage is set by the hardware,
|
||||
bootloader, firmware or kernel board initialisation code.
|
||||
|
||||
Dynamic: consumer needs to change it's supply voltage or
|
||||
current limit to meet operation demands.
|
||||
|
||||
|
||||
o Power Domain - Electronic circuit that is supplied it's input power by the
|
||||
output power of a regulator, switch or by another power
|
||||
domain.
|
||||
|
||||
The supply regulator may be behind a switch(s). i.e.
|
||||
|
||||
Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
|
||||
| |
|
||||
| +-> [Consumer B], [Consumer C]
|
||||
|
|
||||
+-> [Consumer D], [Consumer E]
|
||||
|
||||
That is one regulator and three power domains:
|
||||
|
||||
Domain 1: Switch-1, Consumers D & E.
|
||||
Domain 2: Switch-2, Consumers B & C.
|
||||
Domain 3: Consumer A.
|
||||
|
||||
and this represents a "supplies" relationship:
|
||||
|
||||
Domain-1 --> Domain-2 --> Domain-3.
|
||||
|
||||
A power domain may have regulators that are supplied power
|
||||
by other regulators. i.e.
|
||||
|
||||
Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
|
||||
|
|
||||
+-> [Consumer B]
|
||||
|
||||
This gives us two regulators and two power domains:
|
||||
|
||||
Domain 1: Regulator-2, Consumer B.
|
||||
Domain 2: Consumer A.
|
||||
|
||||
and a "supplies" relationship:
|
||||
|
||||
Domain-1 --> Domain-2
|
||||
|
||||
|
||||
o Constraints - Constraints are used to define power levels for performance
|
||||
and hardware protection. Constraints exist at three levels:
|
||||
|
||||
Regulator Level: This is defined by the regulator hardware
|
||||
operating parameters and is specified in the regulator
|
||||
datasheet. i.e.
|
||||
|
||||
- voltage output is in the range 800mV -> 3500mV.
|
||||
- regulator current output limit is 20mA @ 5V but is
|
||||
10mA @ 10V.
|
||||
|
||||
Power Domain Level: This is defined in software by kernel
|
||||
level board initialisation code. It is used to constrain a
|
||||
power domain to a particular power range. i.e.
|
||||
|
||||
- Domain-1 voltage is 3300mV
|
||||
- Domain-2 voltage is 1400mV -> 1600mV
|
||||
- Domain-3 current limit is 0mA -> 20mA.
|
||||
|
||||
Consumer Level: This is defined by consumer drivers
|
||||
dynamically setting voltage or current limit levels.
|
||||
|
||||
e.g. a consumer backlight driver asks for a current increase
|
||||
from 5mA to 10mA to increase LCD illumination. This passes
|
||||
to through the levels as follows :-
|
||||
|
||||
Consumer: need to increase LCD brightness. Lookup and
|
||||
request next current mA value in brightness table (the
|
||||
consumer driver could be used on several different
|
||||
personalities based upon the same reference device).
|
||||
|
||||
Power Domain: is the new current limit within the domain
|
||||
operating limits for this domain and system state (e.g.
|
||||
battery power, USB power)
|
||||
|
||||
Regulator Domains: is the new current limit within the
|
||||
regulator operating parameters for input/ouput voltage.
|
||||
|
||||
If the regulator request passes all the constraint tests
|
||||
then the new regulator value is applied.
|
||||
|
||||
|
||||
Design
|
||||
======
|
||||
|
||||
The framework is designed and targeted at SoC based devices but may also be
|
||||
relevant to non SoC devices and is split into the following four interfaces:-
|
||||
|
||||
|
||||
1. Consumer driver interface.
|
||||
|
||||
This uses a similar API to the kernel clock interface in that consumer
|
||||
drivers can get and put a regulator (like they can with clocks atm) and
|
||||
get/set voltage, current limit, mode, enable and disable. This should
|
||||
allow consumers complete control over their supply voltage and current
|
||||
limit. This also compiles out if not in use so drivers can be reused in
|
||||
systems with no regulator based power control.
|
||||
|
||||
See Documentation/power/regulator/consumer.txt
|
||||
|
||||
2. Regulator driver interface.
|
||||
|
||||
This allows regulator drivers to register their regulators and provide
|
||||
operations to the core. It also has a notifier call chain for propagating
|
||||
regulator events to clients.
|
||||
|
||||
See Documentation/power/regulator/regulator.txt
|
||||
|
||||
3. Machine interface.
|
||||
|
||||
This interface is for machine specific code and allows the creation of
|
||||
voltage/current domains (with constraints) for each regulator. It can
|
||||
provide regulator constraints that will prevent device damage through
|
||||
overvoltage or over current caused by buggy client drivers. It also
|
||||
allows the creation of a regulator tree whereby some regulators are
|
||||
supplied by others (similar to a clock tree).
|
||||
|
||||
See Documentation/power/regulator/machine.txt
|
||||
|
||||
4. Userspace ABI.
|
||||
|
||||
The framework also exports a lot of useful voltage/current/opmode data to
|
||||
userspace via sysfs. This could be used to help monitor device power
|
||||
consumption and status.
|
||||
|
||||
See Documentation/ABI/testing/regulator-sysfs.txt
|
Loading…
Reference in New Issue
Block a user