ahci-imx: Port to library-ised ahci_platform
This avoids the ugliness of creating a nested platform device from probe. While moving it around anyways, move the mk6q phy init code from probe to imx_sata_enable, as the phy needs to be re-initialized on resume too, otherwise the drive won't be recognized after resume. Tested on a wandboard i.mx6 quad. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
Hans de Goede
Tejun Heo
parent
c5754b5220
commit
90870d79d4
|
|
@ -5,8 +5,9 @@ Each SATA controller should have its own node.
|
|||
|
||||
Required properties:
|
||||
- compatible : compatible list, one of "snps,spear-ahci",
|
||||
"snps,exynos5440-ahci", "ibm,476gtr-ahci", or
|
||||
"allwinner,sun4i-a10-ahci"
|
||||
"snps,exynos5440-ahci", "ibm,476gtr-ahci",
|
||||
"allwinner,sun4i-a10-ahci", "fsl,imx53-ahci" or
|
||||
"fsl,imx6q-ahci"
|
||||
- interrupts : <interrupt mapping for SATA IRQ>
|
||||
- reg : <registers mapping>
|
||||
|
||||
|
|
@ -15,6 +16,10 @@ Optional properties:
|
|||
- clocks : a list of phandle + clock specifier pairs
|
||||
- target-supply : regulator for SATA target power
|
||||
|
||||
"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
|
||||
- clocks : must contain the sata, sata_ref and ahb clocks
|
||||
- clock-names : must contain "ahb" for the ahb clock
|
||||
|
||||
Examples:
|
||||
sata@ffe08000 {
|
||||
compatible = "snps,spear-ahci";
|
||||
|
|
|
|||
|
|
@ -42,13 +42,7 @@ enum ahci_imx_type {
|
|||
struct imx_ahci_priv {
|
||||
struct platform_device *ahci_pdev;
|
||||
enum ahci_imx_type type;
|
||||
|
||||
/* i.MX53 clock */
|
||||
struct clk *sata_gate_clk;
|
||||
/* Common clock */
|
||||
struct clk *sata_ref_clk;
|
||||
struct clk *ahb_clk;
|
||||
|
||||
struct regmap *gpr;
|
||||
bool no_device;
|
||||
bool first_time;
|
||||
|
|
@ -58,288 +52,32 @@ static int ahci_imx_hotplug;
|
|||
module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
|
||||
MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
|
||||
|
||||
static int imx_sata_clock_enable(struct device *dev)
|
||||
static void ahci_imx_host_stop(struct ata_host *host);
|
||||
|
||||
static int imx_sata_enable(struct ahci_host_priv *hpriv)
|
||||
{
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
|
||||
int ret;
|
||||
|
||||
if (imxpriv->type == AHCI_IMX53) {
|
||||
ret = clk_prepare_enable(imxpriv->sata_gate_clk);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "prepare-enable sata_gate clock err:%d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "prepare-enable sata_ref clock err:%d\n",
|
||||
ret);
|
||||
goto clk_err;
|
||||
}
|
||||
|
||||
if (imxpriv->type == AHCI_IMX6Q) {
|
||||
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
|
||||
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
||||
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
||||
}
|
||||
|
||||
usleep_range(1000, 2000);
|
||||
|
||||
if (imxpriv->no_device)
|
||||
return 0;
|
||||
|
||||
clk_err:
|
||||
if (imxpriv->type == AHCI_IMX53)
|
||||
clk_disable_unprepare(imxpriv->sata_gate_clk);
|
||||
if (hpriv->target_pwr) {
|
||||
ret = regulator_enable(hpriv->target_pwr);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void imx_sata_clock_disable(struct device *dev)
|
||||
{
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||
|
||||
if (imxpriv->type == AHCI_IMX6Q) {
|
||||
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
|
||||
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
||||
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
||||
}
|
||||
|
||||
clk_disable_unprepare(imxpriv->sata_ref_clk);
|
||||
|
||||
if (imxpriv->type == AHCI_IMX53)
|
||||
clk_disable_unprepare(imxpriv->sata_gate_clk);
|
||||
}
|
||||
|
||||
static void ahci_imx_error_handler(struct ata_port *ap)
|
||||
{
|
||||
u32 reg_val;
|
||||
struct ata_device *dev;
|
||||
struct ata_host *host = dev_get_drvdata(ap->dev);
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
void __iomem *mmio = hpriv->mmio;
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent);
|
||||
|
||||
ahci_error_handler(ap);
|
||||
|
||||
if (!(imxpriv->first_time) || ahci_imx_hotplug)
|
||||
return;
|
||||
|
||||
imxpriv->first_time = false;
|
||||
|
||||
ata_for_each_dev(dev, &ap->link, ENABLED)
|
||||
return;
|
||||
/*
|
||||
* Disable link to save power. An imx ahci port can't be recovered
|
||||
* without full reset once the pddq mode is enabled making it
|
||||
* impossible to use as part of libata LPM.
|
||||
*/
|
||||
reg_val = readl(mmio + PORT_PHY_CTL);
|
||||
writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
|
||||
imx_sata_clock_disable(ap->dev);
|
||||
imxpriv->no_device = true;
|
||||
}
|
||||
|
||||
static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
|
||||
unsigned long deadline)
|
||||
{
|
||||
struct ata_port *ap = link->ap;
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent);
|
||||
int ret = -EIO;
|
||||
|
||||
if (imxpriv->type == AHCI_IMX53)
|
||||
ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
|
||||
else if (imxpriv->type == AHCI_IMX6Q)
|
||||
ret = ahci_ops.softreset(link, class, deadline);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct ata_port_operations ahci_imx_ops = {
|
||||
.inherits = &ahci_platform_ops,
|
||||
.error_handler = ahci_imx_error_handler,
|
||||
.softreset = ahci_imx_softreset,
|
||||
};
|
||||
|
||||
static const struct ata_port_info ahci_imx_port_info = {
|
||||
.flags = AHCI_FLAG_COMMON,
|
||||
.pio_mask = ATA_PIO4,
|
||||
.udma_mask = ATA_UDMA6,
|
||||
.port_ops = &ahci_imx_ops,
|
||||
};
|
||||
|
||||
static int imx_sata_init(struct device *dev, void __iomem *mmio)
|
||||
{
|
||||
int ret = 0;
|
||||
unsigned int reg_val;
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||
|
||||
ret = imx_sata_clock_enable(dev);
|
||||
ret = ahci_platform_enable_clks(hpriv);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
goto disable_regulator;
|
||||
|
||||
if (imxpriv->type == AHCI_IMX6Q) {
|
||||
/*
|
||||
* Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
|
||||
* and IP vendor specific register HOST_TIMER1MS.
|
||||
* Configure CAP_SSS (support stagered spin up).
|
||||
* Implement the port0.
|
||||
* Get the ahb clock rate, and configure the TIMER1MS register.
|
||||
*/
|
||||
reg_val = readl(mmio + HOST_CAP);
|
||||
if (!(reg_val & HOST_CAP_SSS)) {
|
||||
reg_val |= HOST_CAP_SSS;
|
||||
writel(reg_val, mmio + HOST_CAP);
|
||||
}
|
||||
reg_val = readl(mmio + HOST_PORTS_IMPL);
|
||||
if (!(reg_val & 0x1)) {
|
||||
reg_val |= 0x1;
|
||||
writel(reg_val, mmio + HOST_PORTS_IMPL);
|
||||
}
|
||||
|
||||
reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
|
||||
writel(reg_val, mmio + HOST_TIMER1MS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void imx_sata_exit(struct device *dev)
|
||||
{
|
||||
imx_sata_clock_disable(dev);
|
||||
}
|
||||
|
||||
static int imx_ahci_suspend(struct device *dev)
|
||||
{
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||
|
||||
/*
|
||||
* If no_device is set, The CLKs had been gated off in the
|
||||
* initialization so don't do it again here.
|
||||
*/
|
||||
if (!imxpriv->no_device)
|
||||
imx_sata_clock_disable(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int imx_ahci_resume(struct device *dev)
|
||||
{
|
||||
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||
int ret = 0;
|
||||
|
||||
if (!imxpriv->no_device)
|
||||
ret = imx_sata_clock_enable(dev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct ahci_platform_data imx_sata_pdata = {
|
||||
.init = imx_sata_init,
|
||||
.exit = imx_sata_exit,
|
||||
.ata_port_info = &ahci_imx_port_info,
|
||||
.suspend = imx_ahci_suspend,
|
||||
.resume = imx_ahci_resume,
|
||||
|
||||
};
|
||||
|
||||
static const struct of_device_id imx_ahci_of_match[] = {
|
||||
{ .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
|
||||
{ .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
|
||||
|
||||
static int imx_ahci_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *mem, *irq, res[2];
|
||||
const struct of_device_id *of_id;
|
||||
enum ahci_imx_type type;
|
||||
const struct ahci_platform_data *pdata = NULL;
|
||||
struct imx_ahci_priv *imxpriv;
|
||||
struct device *ahci_dev;
|
||||
struct platform_device *ahci_pdev;
|
||||
int ret;
|
||||
|
||||
of_id = of_match_device(imx_ahci_of_match, dev);
|
||||
if (!of_id)
|
||||
return -EINVAL;
|
||||
|
||||
type = (enum ahci_imx_type)of_id->data;
|
||||
pdata = &imx_sata_pdata;
|
||||
|
||||
imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
|
||||
if (!imxpriv) {
|
||||
dev_err(dev, "can't alloc ahci_host_priv\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
ahci_pdev = platform_device_alloc("ahci", -1);
|
||||
if (!ahci_pdev)
|
||||
return -ENODEV;
|
||||
|
||||
ahci_dev = &ahci_pdev->dev;
|
||||
ahci_dev->parent = dev;
|
||||
|
||||
imxpriv->no_device = false;
|
||||
imxpriv->first_time = true;
|
||||
imxpriv->type = type;
|
||||
|
||||
imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
|
||||
if (IS_ERR(imxpriv->ahb_clk)) {
|
||||
dev_err(dev, "can't get ahb clock.\n");
|
||||
ret = PTR_ERR(imxpriv->ahb_clk);
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
if (type == AHCI_IMX53) {
|
||||
imxpriv->sata_gate_clk = devm_clk_get(dev, "sata_gate");
|
||||
if (IS_ERR(imxpriv->sata_gate_clk)) {
|
||||
dev_err(dev, "can't get sata_gate clock.\n");
|
||||
ret = PTR_ERR(imxpriv->sata_gate_clk);
|
||||
goto err_out;
|
||||
}
|
||||
}
|
||||
|
||||
imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
|
||||
if (IS_ERR(imxpriv->sata_ref_clk)) {
|
||||
dev_err(dev, "can't get sata_ref clock.\n");
|
||||
ret = PTR_ERR(imxpriv->sata_ref_clk);
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
imxpriv->ahci_pdev = ahci_pdev;
|
||||
platform_set_drvdata(pdev, imxpriv);
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||
if (!mem || !irq) {
|
||||
dev_err(dev, "no mmio/irq resource\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
res[0] = *mem;
|
||||
res[1] = *irq;
|
||||
|
||||
ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
|
||||
ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
|
||||
ahci_dev->of_node = dev->of_node;
|
||||
|
||||
if (type == AHCI_IMX6Q) {
|
||||
imxpriv->gpr = syscon_regmap_lookup_by_compatible(
|
||||
"fsl,imx6q-iomuxc-gpr");
|
||||
if (IS_ERR(imxpriv->gpr)) {
|
||||
dev_err(dev,
|
||||
"failed to find fsl,imx6q-iomux-gpr regmap\n");
|
||||
ret = PTR_ERR(imxpriv->gpr);
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set PHY Paremeters, two steps to configure the GPR13,
|
||||
* set PHY Paremeters, two steps to configure the GPR13,
|
||||
* one write for rest of parameters, mask of first write
|
||||
* is 0x07fffffe, and the other one write for setting
|
||||
* the mpll_clk_en happens in imx_sata_clock_enable().
|
||||
* is 0x07ffffff, and the other one write for setting
|
||||
* the mpll_clk_en.
|
||||
*/
|
||||
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
|
||||
IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK |
|
||||
|
|
@ -360,42 +98,227 @@ static int imx_ahci_probe(struct platform_device *pdev)
|
|||
IMX6Q_GPR13_SATA_TX_ATTEN_9_16 |
|
||||
IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB |
|
||||
IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
|
||||
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
|
||||
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
||||
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
||||
}
|
||||
|
||||
ret = platform_device_add_resources(ahci_pdev, res, 2);
|
||||
if (ret)
|
||||
goto err_out;
|
||||
usleep_range(1000, 2000);
|
||||
|
||||
ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
|
||||
if (ret)
|
||||
goto err_out;
|
||||
return 0;
|
||||
|
||||
disable_regulator:
|
||||
if (hpriv->target_pwr)
|
||||
regulator_disable(hpriv->target_pwr);
|
||||
|
||||
ret = platform_device_add(ahci_pdev);
|
||||
if (ret) {
|
||||
err_out:
|
||||
platform_device_put(ahci_pdev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void imx_sata_disable(struct ahci_host_priv *hpriv)
|
||||
{
|
||||
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
|
||||
|
||||
if (imxpriv->no_device)
|
||||
return;
|
||||
|
||||
if (imxpriv->type == AHCI_IMX6Q) {
|
||||
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
|
||||
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
||||
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
||||
}
|
||||
|
||||
return 0;
|
||||
ahci_platform_disable_clks(hpriv);
|
||||
|
||||
if (hpriv->target_pwr)
|
||||
regulator_disable(hpriv->target_pwr);
|
||||
}
|
||||
|
||||
static int imx_ahci_remove(struct platform_device *pdev)
|
||||
static void ahci_imx_error_handler(struct ata_port *ap)
|
||||
{
|
||||
struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
|
||||
struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
|
||||
u32 reg_val;
|
||||
struct ata_device *dev;
|
||||
struct ata_host *host = dev_get_drvdata(ap->dev);
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
void __iomem *mmio = hpriv->mmio;
|
||||
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
|
||||
|
||||
ahci_error_handler(ap);
|
||||
|
||||
if (!(imxpriv->first_time) || ahci_imx_hotplug)
|
||||
return;
|
||||
|
||||
imxpriv->first_time = false;
|
||||
|
||||
ata_for_each_dev(dev, &ap->link, ENABLED)
|
||||
return;
|
||||
/*
|
||||
* Disable link to save power. An imx ahci port can't be recovered
|
||||
* without full reset once the pddq mode is enabled making it
|
||||
* impossible to use as part of libata LPM.
|
||||
*/
|
||||
reg_val = readl(mmio + PORT_PHY_CTL);
|
||||
writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
|
||||
imx_sata_disable(hpriv);
|
||||
imxpriv->no_device = true;
|
||||
}
|
||||
|
||||
static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
|
||||
unsigned long deadline)
|
||||
{
|
||||
struct ata_port *ap = link->ap;
|
||||
struct ata_host *host = dev_get_drvdata(ap->dev);
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
|
||||
int ret = -EIO;
|
||||
|
||||
if (imxpriv->type == AHCI_IMX53)
|
||||
ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
|
||||
else if (imxpriv->type == AHCI_IMX6Q)
|
||||
ret = ahci_ops.softreset(link, class, deadline);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct ata_port_operations ahci_imx_ops = {
|
||||
.inherits = &ahci_ops,
|
||||
.host_stop = ahci_imx_host_stop,
|
||||
.error_handler = ahci_imx_error_handler,
|
||||
.softreset = ahci_imx_softreset,
|
||||
};
|
||||
|
||||
static const struct ata_port_info ahci_imx_port_info = {
|
||||
.flags = AHCI_FLAG_COMMON,
|
||||
.pio_mask = ATA_PIO4,
|
||||
.udma_mask = ATA_UDMA6,
|
||||
.port_ops = &ahci_imx_ops,
|
||||
};
|
||||
|
||||
static const struct of_device_id imx_ahci_of_match[] = {
|
||||
{ .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
|
||||
{ .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
|
||||
|
||||
static int imx_ahci_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
const struct of_device_id *of_id;
|
||||
struct ahci_host_priv *hpriv;
|
||||
struct imx_ahci_priv *imxpriv;
|
||||
unsigned int reg_val;
|
||||
int ret;
|
||||
|
||||
of_id = of_match_device(imx_ahci_of_match, dev);
|
||||
if (!of_id)
|
||||
return -EINVAL;
|
||||
|
||||
imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
|
||||
if (!imxpriv)
|
||||
return -ENOMEM;
|
||||
|
||||
imxpriv->no_device = false;
|
||||
imxpriv->first_time = true;
|
||||
imxpriv->type = (enum ahci_imx_type)of_id->data;
|
||||
imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
|
||||
if (IS_ERR(imxpriv->ahb_clk)) {
|
||||
dev_err(dev, "can't get ahb clock.\n");
|
||||
return PTR_ERR(imxpriv->ahb_clk);
|
||||
}
|
||||
|
||||
if (imxpriv->type == AHCI_IMX6Q) {
|
||||
imxpriv->gpr = syscon_regmap_lookup_by_compatible(
|
||||
"fsl,imx6q-iomuxc-gpr");
|
||||
if (IS_ERR(imxpriv->gpr)) {
|
||||
dev_err(dev,
|
||||
"failed to find fsl,imx6q-iomux-gpr regmap\n");
|
||||
return PTR_ERR(imxpriv->gpr);
|
||||
}
|
||||
}
|
||||
|
||||
hpriv = ahci_platform_get_resources(pdev);
|
||||
if (IS_ERR(hpriv))
|
||||
return PTR_ERR(hpriv);
|
||||
|
||||
hpriv->plat_data = imxpriv;
|
||||
|
||||
ret = imx_sata_enable(hpriv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
|
||||
* and IP vendor specific register HOST_TIMER1MS.
|
||||
* Configure CAP_SSS (support stagered spin up).
|
||||
* Implement the port0.
|
||||
* Get the ahb clock rate, and configure the TIMER1MS register.
|
||||
*/
|
||||
reg_val = readl(hpriv->mmio + HOST_CAP);
|
||||
if (!(reg_val & HOST_CAP_SSS)) {
|
||||
reg_val |= HOST_CAP_SSS;
|
||||
writel(reg_val, hpriv->mmio + HOST_CAP);
|
||||
}
|
||||
reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL);
|
||||
if (!(reg_val & 0x1)) {
|
||||
reg_val |= 0x1;
|
||||
writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL);
|
||||
}
|
||||
|
||||
reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
|
||||
writel(reg_val, hpriv->mmio + HOST_TIMER1MS);
|
||||
|
||||
ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0);
|
||||
if (ret)
|
||||
imx_sata_disable(hpriv);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void ahci_imx_host_stop(struct ata_host *host)
|
||||
{
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
|
||||
imx_sata_disable(hpriv);
|
||||
}
|
||||
|
||||
static int imx_ahci_suspend(struct device *dev)
|
||||
{
|
||||
struct ata_host *host = dev_get_drvdata(dev);
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
int ret;
|
||||
|
||||
ret = ahci_platform_suspend_host(dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
imx_sata_disable(hpriv);
|
||||
|
||||
platform_device_unregister(ahci_pdev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int imx_ahci_resume(struct device *dev)
|
||||
{
|
||||
struct ata_host *host = dev_get_drvdata(dev);
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
int ret;
|
||||
|
||||
ret = imx_sata_enable(hpriv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return ahci_platform_resume_host(dev);
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
|
||||
|
||||
static struct platform_driver imx_ahci_driver = {
|
||||
.probe = imx_ahci_probe,
|
||||
.remove = imx_ahci_remove,
|
||||
.remove = ata_platform_remove_one,
|
||||
.driver = {
|
||||
.name = "ahci-imx",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = imx_ahci_of_match,
|
||||
.pm = &ahci_imx_pm_ops,
|
||||
},
|
||||
};
|
||||
module_platform_driver(imx_ahci_driver);
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user