USB: more serial drivers writing after disconnect

this covers the rest of the obvious cases by using the flags
and locks to guard against disconnect which were introduced
in the earlier patch against mos7720.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Oliver Neukum 2008-01-22 13:56:18 +01:00 committed by Greg Kroah-Hartman
parent e33fe4d86f
commit 95bef012ea
5 changed files with 24 additions and 9 deletions

View File

@ -217,7 +217,10 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp)
priv->rts_state = 0;
priv->dtr_state = 0;
airprime_send_setup(port);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
airprime_send_setup(port);
mutex_lock(&port->serial->disc_mutex);
for (i = 0; i < NUM_READ_URBS; ++i) {
usb_kill_urb (priv->read_urbp[i]);

View File

@ -348,7 +348,10 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
mutex_unlock(&port->serial->disc_mutex);
}
/*

View File

@ -1198,7 +1198,8 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
dbg("%s", __FUNCTION__);
if (c_cflag & HUPCL){
mutex_lock(&port->serial->disc_mutex);
if (c_cflag & HUPCL && !port->serial->disconnected){
/* Disable flow control */
if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
@ -1212,6 +1213,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
/* drop RTS and DTR */
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} /* Note change no line if hupcl is off */
mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
cancel_delayed_work(&priv->rx_work);

View File

@ -1020,19 +1020,26 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp)
if (!serial)
return;
garmin_clear(garmin_data_p);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
garmin_clear(garmin_data_p);
/* shutdown our urbs */
usb_kill_urb (port->read_urb);
usb_kill_urb (port->write_urb);
if (noResponseFromAppLayer(garmin_data_p) ||
((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
process_resetdev_request(port);
garmin_data_p->state = STATE_RESET;
if (!port->serial->disconnected) {
if (noResponseFromAppLayer(garmin_data_p) ||
((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
process_resetdev_request(port);
garmin_data_p->state = STATE_RESET;
} else {
garmin_data_p->state = STATE_DISCONNECTED;
}
} else {
garmin_data_p->state = STATE_DISCONNECTED;
}
mutex_unlock(&port->serial->disc_mutex);
}

View File

@ -362,7 +362,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp)
kfree (transfer_buffer);
}
}
mutex_lock(&port->serial->disc_mutex);
mutex_unlock(&port->serial->disc_mutex);
if (stats)
dev_info(&port->dev, "Bytes In = %d Bytes Out = %d\n",