From bd0976dd3379e790b031cef7f477c58b82a65fc2 Mon Sep 17 00:00:00 2001 From: Marco Piazza Date: Thu, 28 Nov 2013 00:15:25 +0100 Subject: [PATCH 1/8] Bluetooth: Add support for Toshiba Bluetooth device [0930:0220] This patch adds support for new Toshiba Bluetooth device. T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0220 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Marco Piazza Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 6bfc1bb318f6..dceb85f8d9a8 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -87,6 +87,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0CF3, 0xE005) }, { USB_DEVICE(0x0930, 0x0219) }, + { USB_DEVICE(0x0930, 0x0220) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x0489, 0xe04e) }, @@ -129,6 +130,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c0ff34f2d2df..3980fd18f6ea 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -154,6 +154,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, From 4c4d684a55fc01dac6bee696efc56b96d0e6c03a Mon Sep 17 00:00:00 2001 From: Ujjal Roy Date: Wed, 4 Dec 2013 17:27:34 +0530 Subject: [PATCH 2/8] cfg80211: fix WARN_ON for re-association to the expired BSS cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [] dump_stack+0x46/0x58 [] warn_slowpath_common+0x87/0xb0 [] warn_slowpath_null+0x15/0x20 [] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [] ? update_rq_clock+0x2b/0x50 [] ? update_curr+0x1/0x160 [] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [] ? pick_next_task_fair+0x63/0x170 [] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [] cfg80211_event_work+0x1d/0x30 [cfg80211] [] process_one_work+0x17f/0x420 [] worker_thread+0x11a/0x370 [] ? rescuer_thread+0x2f0/0x2f0 [] kthread+0xbb/0xc0 [] ? kthread_create_on_node+0x120/0x120 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy Signed-off-by: Johannes Berg --- net/wireless/sme.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 65f800890d70..d3c5bd7c6b51 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -632,6 +632,16 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, } #endif + if (!bss && (status == WLAN_STATUS_SUCCESS)) { + WARN_ON_ONCE(!wiphy_to_dev(wdev->wiphy)->ops->connect); + bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid, + wdev->ssid, wdev->ssid_len, + WLAN_CAPABILITY_ESS, + WLAN_CAPABILITY_ESS); + if (bss) + cfg80211_hold_bss(bss_from_pub(bss)); + } + if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); @@ -649,16 +659,8 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, return; } - if (!bss) { - WARN_ON_ONCE(!wiphy_to_dev(wdev->wiphy)->ops->connect); - bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid, - wdev->ssid, wdev->ssid_len, - WLAN_CAPABILITY_ESS, - WLAN_CAPABILITY_ESS); - if (WARN_ON(!bss)) - return; - cfg80211_hold_bss(bss_from_pub(bss)); - } + if (WARN_ON(!bss)) + return; wdev->current_bss = bss_from_pub(bss); From bbf807bc0697e577c137a5fffb30fca7c6a45da1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 5 Dec 2013 15:20:53 +0100 Subject: [PATCH 3/8] ath9k: fix duration calculation for non-aggregated packets When not aggregating packets, fi->framelen should be passed in as length to calculate the duration. Before the tx path rework, ath_tx_fill_desc was called for either one aggregate, or one single frame, with the length of the packet or the aggregate as a parameter. After the rework, ath_tx_sched_aggr can pass a burst of single frames to ath_tx_fill_desc and sets len=0. Fix broken duration calculation by overriding the length in ath_tx_fill_desc before passing it to ath_buf_set_rate. Cc: stable@vger.kernel.org Reported-by: Simon Wunderlich Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 09cdbcd09739..b5a19e098f2d 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1276,6 +1276,10 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf, if (!rts_thresh || (len > rts_thresh)) rts = true; } + + if (!aggr) + len = fi->framelen; + ath_buf_set_rate(sc, bf, &info, len, rts); } From bd02cd2549cfcdfc57cb5ce57ffc3feb94f70575 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 16 Dec 2013 12:04:36 +0100 Subject: [PATCH 4/8] radiotap: fix bitmap-end-finding buffer overrun Evan Huus found (by fuzzing in wireshark) that the radiotap iterator code can access beyond the length of the buffer if the first bitmap claims an extension but then there's no data at all. Fix this. Cc: stable@vger.kernel.org Reported-by: Evan Huus Signed-off-by: Johannes Berg --- net/wireless/radiotap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c index a271c27fac77..722da616438c 100644 --- a/net/wireless/radiotap.c +++ b/net/wireless/radiotap.c @@ -124,6 +124,10 @@ int ieee80211_radiotap_iterator_init( /* find payload start allowing for extended bitmap(s) */ if (iterator->_bitmap_shifter & (1<_arg - + (unsigned long)iterator->_rtheader + sizeof(uint32_t) > + (unsigned long)iterator->_max_length) + return -EINVAL; while (get_unaligned_le32(iterator->_arg) & (1 << IEEE80211_RADIOTAP_EXT)) { iterator->_arg += sizeof(uint32_t); From 1bc5ad168f441f6f8bfd944288a5f7b4963ac1f6 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 17 Dec 2013 03:21:25 -0800 Subject: [PATCH 5/8] Bluetooth: Fix HCI User Channel permission check in hci_sock_sendmsg The HCI User Channel is an admin operation which enforces CAP_NET_ADMIN when binding the socket. Problem now is that it then requires also CAP_NET_RAW when calling into hci_sock_sendmsg. This is not intended and just an oversight since general HCI sockets (which do not require special permission to bind) and HCI User Channel share the same code path here. Remove the extra CAP_NET_RAW check for HCI User Channel write operation since the permission check has already been enforced when binding the socket. This also makes it possible to open HCI User Channel from a privileged process and then hand the file descriptor to an unprivilged process. Signed-off-by: Marcel Holtmann Tested-by: Samuel Ortiz Signed-off-by: Johan Hedberg --- net/bluetooth/hci_sock.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 71f0be173080..73bf644c7c74 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -942,8 +942,22 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, bt_cb(skb)->pkt_type = *((unsigned char *) skb->data); skb_pull(skb, 1); - if (hci_pi(sk)->channel == HCI_CHANNEL_RAW && - bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { + if (hci_pi(sk)->channel == HCI_CHANNEL_USER) { + /* No permission check is needed for user channel + * since that gets enforced when binding the socket. + * + * However check that the packet type is valid. + */ + if (bt_cb(skb)->pkt_type != HCI_COMMAND_PKT && + bt_cb(skb)->pkt_type != HCI_ACLDATA_PKT && + bt_cb(skb)->pkt_type != HCI_SCODATA_PKT) { + err = -EINVAL; + goto drop; + } + + skb_queue_tail(&hdev->raw_q, skb); + queue_work(hdev->workqueue, &hdev->tx_work); + } else if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { u16 opcode = get_unaligned_le16(skb->data); u16 ogf = hci_opcode_ogf(opcode); u16 ocf = hci_opcode_ocf(opcode); @@ -974,14 +988,6 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, goto drop; } - if (hci_pi(sk)->channel == HCI_CHANNEL_USER && - bt_cb(skb)->pkt_type != HCI_COMMAND_PKT && - bt_cb(skb)->pkt_type != HCI_ACLDATA_PKT && - bt_cb(skb)->pkt_type != HCI_SCODATA_PKT) { - err = -EINVAL; - goto drop; - } - skb_queue_tail(&hdev->raw_q, skb); queue_work(hdev->workqueue, &hdev->tx_work); } From 657eb17d87852c42b55c4b06d5425baa08b2ddb3 Mon Sep 17 00:00:00 2001 From: Mathy Vanhoef Date: Thu, 28 Nov 2013 12:21:45 +0100 Subject: [PATCH 6/8] ath9k_htc: properly set MAC address and BSSID mask Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by: Mathy Vanhoef Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 25 +++++++++++++------ drivers/net/wireless/ath/ath9k/main.c | 5 ++-- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 9a2657fdd9cc..608d739d1378 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -127,21 +127,26 @@ static void ath9k_htc_bssid_iter(void *data, u8 *mac, struct ieee80211_vif *vif) struct ath9k_vif_iter_data *iter_data = data; int i; - for (i = 0; i < ETH_ALEN; i++) - iter_data->mask[i] &= ~(iter_data->hw_macaddr[i] ^ mac[i]); + if (iter_data->hw_macaddr != NULL) { + for (i = 0; i < ETH_ALEN; i++) + iter_data->mask[i] &= ~(iter_data->hw_macaddr[i] ^ mac[i]); + } else { + iter_data->hw_macaddr = mac; + } } -static void ath9k_htc_set_bssid_mask(struct ath9k_htc_priv *priv, +static void ath9k_htc_set_mac_bssid_mask(struct ath9k_htc_priv *priv, struct ieee80211_vif *vif) { struct ath_common *common = ath9k_hw_common(priv->ah); struct ath9k_vif_iter_data iter_data; /* - * Use the hardware MAC address as reference, the hardware uses it - * together with the BSSID mask when matching addresses. + * Pick the MAC address of the first interface as the new hardware + * MAC address. The hardware will use it together with the BSSID mask + * when matching addresses. */ - iter_data.hw_macaddr = common->macaddr; + iter_data.hw_macaddr = NULL; memset(&iter_data.mask, 0xff, ETH_ALEN); if (vif) @@ -153,6 +158,10 @@ static void ath9k_htc_set_bssid_mask(struct ath9k_htc_priv *priv, ath9k_htc_bssid_iter, &iter_data); memcpy(common->bssidmask, iter_data.mask, ETH_ALEN); + + if (iter_data.hw_macaddr) + memcpy(common->macaddr, iter_data.hw_macaddr, ETH_ALEN); + ath_hw_setbssidmask(common); } @@ -1063,7 +1072,7 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw, goto out; } - ath9k_htc_set_bssid_mask(priv, vif); + ath9k_htc_set_mac_bssid_mask(priv, vif); priv->vif_slot |= (1 << avp->index); priv->nvifs++; @@ -1128,7 +1137,7 @@ static void ath9k_htc_remove_interface(struct ieee80211_hw *hw, ath9k_htc_set_opmode(priv); - ath9k_htc_set_bssid_mask(priv, vif); + ath9k_htc_set_mac_bssid_mask(priv, vif); /* * Stop ANI only if there are no associated station interfaces. diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 74f452c7b166..21aa09e0e825 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -965,8 +965,9 @@ void ath9k_calculate_iter_data(struct ieee80211_hw *hw, struct ath_common *common = ath9k_hw_common(ah); /* - * Use the hardware MAC address as reference, the hardware uses it - * together with the BSSID mask when matching addresses. + * Pick the MAC address of the first interface as the new hardware + * MAC address. The hardware will use it together with the BSSID mask + * when matching addresses. */ memset(iter_data, 0, sizeof(*iter_data)); memset(&iter_data->mask, 0xff, ETH_ALEN); From 9278db6279e28d4d433bc8a848e10b4ece8793ed Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 11 Dec 2013 17:13:10 -0600 Subject: [PATCH 7/8] rtlwifi: pci: Fix oops on driver unload On Fedora systems, unloading rtl8192ce causes an oops. This patch fixes the problem reported at https://bugzilla.redhat.com/show_bug.cgi?id=852761. Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 0f494444bcd1..5a53195d016b 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -740,6 +740,8 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) }; int index = rtlpci->rx_ring[rx_queue_idx].idx; + if (rtlpci->driver_is_goingto_unload) + return; /*RX NORMAL PKT */ while (count--) { /*rx descriptor */ @@ -1636,6 +1638,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw) */ set_hal_stop(rtlhal); + rtlpci->driver_is_goingto_unload = true; rtlpriv->cfg->ops->disable_interrupt(hw); cancel_work_sync(&rtlpriv->works.lps_change_work); @@ -1653,7 +1656,6 @@ static void rtl_pci_stop(struct ieee80211_hw *hw) ppsc->rfchange_inprogress = true; spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flags); - rtlpci->driver_is_goingto_unload = true; rtlpriv->cfg->ops->hw_disable(hw); /* some things are not needed if firmware not available */ if (!rtlpriv->max_fw_size) From 73f0b56a1ff64e7fb6c3a62088804bab93bcedc2 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 16 Dec 2013 07:04:59 +0530 Subject: [PATCH 8/8] ath9k: Fix interrupt handling for the AR9002 family This patch adds a driver workaround for a HW issue. A race condition in the HW results in missing interrupts, which can be avoided by a read/write with the ISR register. All chips in the AR9002 series are affected by this bug - AR9003 and above do not have this problem. Cc: stable@vger.kernel.org Cc: Felix Fietkau Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_mac.c | 52 +++++++++++++++++---- 1 file changed, 43 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c index 8d78253c26ce..a366d6b4626f 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c @@ -76,9 +76,16 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked) mask2 |= ATH9K_INT_CST; if (isr2 & AR_ISR_S2_TSFOOR) mask2 |= ATH9K_INT_TSFOOR; + + if (!(pCap->hw_caps & ATH9K_HW_CAP_RAC_SUPPORTED)) { + REG_WRITE(ah, AR_ISR_S2, isr2); + isr &= ~AR_ISR_BCNMISC; + } } - isr = REG_READ(ah, AR_ISR_RAC); + if (pCap->hw_caps & ATH9K_HW_CAP_RAC_SUPPORTED) + isr = REG_READ(ah, AR_ISR_RAC); + if (isr == 0xffffffff) { *masked = 0; return false; @@ -97,11 +104,23 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked) *masked |= ATH9K_INT_TX; - s0_s = REG_READ(ah, AR_ISR_S0_S); + if (pCap->hw_caps & ATH9K_HW_CAP_RAC_SUPPORTED) { + s0_s = REG_READ(ah, AR_ISR_S0_S); + s1_s = REG_READ(ah, AR_ISR_S1_S); + } else { + s0_s = REG_READ(ah, AR_ISR_S0); + REG_WRITE(ah, AR_ISR_S0, s0_s); + s1_s = REG_READ(ah, AR_ISR_S1); + REG_WRITE(ah, AR_ISR_S1, s1_s); + + isr &= ~(AR_ISR_TXOK | + AR_ISR_TXDESC | + AR_ISR_TXERR | + AR_ISR_TXEOL); + } + ah->intr_txqs |= MS(s0_s, AR_ISR_S0_QCU_TXOK); ah->intr_txqs |= MS(s0_s, AR_ISR_S0_QCU_TXDESC); - - s1_s = REG_READ(ah, AR_ISR_S1_S); ah->intr_txqs |= MS(s1_s, AR_ISR_S1_QCU_TXERR); ah->intr_txqs |= MS(s1_s, AR_ISR_S1_QCU_TXEOL); } @@ -114,13 +133,15 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked) *masked |= mask2; } - if (AR_SREV_9100(ah)) - return true; - - if (isr & AR_ISR_GENTMR) { + if (!AR_SREV_9100(ah) && (isr & AR_ISR_GENTMR)) { u32 s5_s; - s5_s = REG_READ(ah, AR_ISR_S5_S); + if (pCap->hw_caps & ATH9K_HW_CAP_RAC_SUPPORTED) { + s5_s = REG_READ(ah, AR_ISR_S5_S); + } else { + s5_s = REG_READ(ah, AR_ISR_S5); + } + ah->intr_gen_timer_trigger = MS(s5_s, AR_ISR_S5_GENTIMER_TRIG); @@ -133,8 +154,21 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked) if ((s5_s & AR_ISR_S5_TIM_TIMER) && !(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) *masked |= ATH9K_INT_TIM_TIMER; + + if (!(pCap->hw_caps & ATH9K_HW_CAP_RAC_SUPPORTED)) { + REG_WRITE(ah, AR_ISR_S5, s5_s); + isr &= ~AR_ISR_GENTMR; + } } + if (!(pCap->hw_caps & ATH9K_HW_CAP_RAC_SUPPORTED)) { + REG_WRITE(ah, AR_ISR, isr); + REG_READ(ah, AR_ISR); + } + + if (AR_SREV_9100(ah)) + return true; + if (sync_cause) { ath9k_debug_sync_cause(common, sync_cause); fatal_int =