luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tty: serial: qcom_geni_serial: Add 51.2MHz frequency support

Browse Source 
To support BT use case over UART at baud rate of 3.2 Mbps,
we need SE clocks to run at 51.2MHz frequency. Previously this
frequency was not available in clk src, so, we were requesting
for 102.4 MHz and dividing it internally by 2 to get 51.2MHz.

As now 51.2MHz frequency is made available in clk src,
adding this frequency to UART frequency table.

We will save significant amount of power, if 51.2 is used
because it belongs to LowSVS range whereas 102.4 fall into
Nominal category.

Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1590747282-5487-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
satya priya 2020-05-29 15:44:42 +05:30 committed by Greg Kroah-Hartman
parent d1d996afbd
commit a1b44ea340
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/tty/serial/qcom_geni_serial.c
View File

@ -141,9 +141,10 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport);
static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop);
static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
32000000, 48000000, 64000000, 80000000,
96000000, 100000000, 102400000,
112000000, 120000000, 128000000};
32000000, 48000000, 51200000, 64000000,
80000000, 96000000, 100000000,
102400000, 112000000, 120000000,
128000000};
#define to_dev_port(ptr, member) \
container_of(ptr, struct qcom_geni_serial_port, member)