lcd: add SPI-based LCD and backlight driver for SHARP corgi/spitz
The driver is based on different source files including corgi_ssp.c, corgi_lcd.c and corgi_bl.c, previously authored by Richard Purdie and many others. The LCD and Backlight device actually share the same SPI device, so they are made into this single driver. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Eric Miao
Russell King
parent
faa312da9c
commit
b18250a8f6
@ -24,6 +24,13 @@ config LCD_CLASS_DEVICE
|
||||
To have support for your specific LCD panel you will have to
|
||||
select the proper drivers which depend on this option.
|
||||
|
||||
config LCD_CORGI
|
||||
tristate "LCD Panel support for SHARP corgi/spitz model"
|
||||
depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
|
||||
help
|
||||
Say y here to support the LCD panels usually found on SHARP
|
||||
corgi (C7x0) and spitz (Cxx00) models.
|
||||
|
||||
config LCD_LTV350QV
|
||||
tristate "Samsung LTV350QV LCD Panel"
|
||||
depends on LCD_CLASS_DEVICE && SPI_MASTER
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
# Backlight & LCD drivers
|
||||
|
||||
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
|
||||
obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
|
||||
obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
|
||||
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
|
||||
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
|
||||
|
||||
541
drivers/video/backlight/corgi_lcd.c
Normal file
541
drivers/video/backlight/corgi_lcd.c
Normal file
@ -0,0 +1,541 @@
|
||||
/*
|
||||
* LCD/Backlight Driver for Sharp Zaurus Handhelds (various models)
|
||||
*
|
||||
* Copyright (c) 2004-2006 Richard Purdie
|
||||
*
|
||||
* Based on Sharp's 2.4 Backlight Driver
|
||||
*
|
||||
* Copyright (c) 2008 Marvell International Ltd.
|
||||
* Converted to SPI device based LCD/Backlight device driver
|
||||
* by Eric Miao <eric.miao@marvell.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/lcd.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/corgi_lcd.h>
|
||||
#include <asm/mach/sharpsl_param.h>
|
||||
|
||||
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
|
||||
|
||||
/* Register Addresses */
|
||||
#define RESCTL_ADRS 0x00
|
||||
#define PHACTRL_ADRS 0x01
|
||||
#define DUTYCTRL_ADRS 0x02
|
||||
#define POWERREG0_ADRS 0x03
|
||||
#define POWERREG1_ADRS 0x04
|
||||
#define GPOR3_ADRS 0x05
|
||||
#define PICTRL_ADRS 0x06
|
||||
#define POLCTRL_ADRS 0x07
|
||||
|
||||
/* Register Bit Definitions */
|
||||
#define RESCTL_QVGA 0x01
|
||||
#define RESCTL_VGA 0x00
|
||||
|
||||
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
|
||||
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
|
||||
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
|
||||
|
||||
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
|
||||
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
|
||||
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
|
||||
|
||||
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
|
||||
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
|
||||
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
|
||||
#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
|
||||
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
|
||||
|
||||
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
|
||||
#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
|
||||
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
|
||||
|
||||
#define PICTRL_INIT_STATE 0x01
|
||||
#define PICTRL_INIOFF 0x02
|
||||
#define PICTRL_POWER_DOWN 0x04
|
||||
#define PICTRL_COM_SIGNAL_OFF 0x08
|
||||
#define PICTRL_DAC_SIGNAL_OFF 0x10
|
||||
|
||||
#define POLCTRL_SYNC_POL_FALL 0x01
|
||||
#define POLCTRL_EN_POL_FALL 0x02
|
||||
#define POLCTRL_DATA_POL_FALL 0x04
|
||||
#define POLCTRL_SYNC_ACT_H 0x08
|
||||
#define POLCTRL_EN_ACT_L 0x10
|
||||
|
||||
#define POLCTRL_SYNC_POL_RISE 0x00
|
||||
#define POLCTRL_EN_POL_RISE 0x00
|
||||
#define POLCTRL_DATA_POL_RISE 0x00
|
||||
#define POLCTRL_SYNC_ACT_L 0x00
|
||||
#define POLCTRL_EN_ACT_H 0x00
|
||||
|
||||
#define PHACTRL_PHASE_MANUAL 0x01
|
||||
#define DEFAULT_PHAD_QVGA (9)
|
||||
#define DEFAULT_COMADJ (125)
|
||||
|
||||
struct corgi_lcd {
|
||||
struct spi_device *spi_dev;
|
||||
struct lcd_device *lcd_dev;
|
||||
struct backlight_device *bl_dev;
|
||||
|
||||
int intensity;
|
||||
int power;
|
||||
int mode;
|
||||
char buf[2];
|
||||
|
||||
void (*notify)(int intensity);
|
||||
void (*kick_battery)(void);
|
||||
};
|
||||
|
||||
static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val);
|
||||
|
||||
/*
|
||||
* This is only a psuedo I2C interface. We can't use the standard kernel
|
||||
* routines as the interface is write only. We just assume the data is acked...
|
||||
*/
|
||||
static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
|
||||
{
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data);
|
||||
udelay(10);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data)
|
||||
{
|
||||
lcdtg_ssp_i2c_send(lcd, data);
|
||||
lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK);
|
||||
lcdtg_ssp_i2c_send(lcd, data);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base)
|
||||
{
|
||||
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
||||
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
|
||||
lcdtg_ssp_i2c_send(lcd, base);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base)
|
||||
{
|
||||
lcdtg_ssp_i2c_send(lcd, base);
|
||||
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
|
||||
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd,
|
||||
uint8_t base, uint8_t data)
|
||||
{
|
||||
int i;
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (data & 0x80)
|
||||
lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT);
|
||||
else
|
||||
lcdtg_i2c_send_bit(lcd, base);
|
||||
data <<= 1;
|
||||
}
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base)
|
||||
{
|
||||
lcdtg_i2c_send_bit(lcd, base);
|
||||
}
|
||||
|
||||
static void lcdtg_set_common_voltage(struct corgi_lcd *lcd,
|
||||
uint8_t base_data, uint8_t data)
|
||||
{
|
||||
/* Set Common Voltage to M62332FP via I2C */
|
||||
lcdtg_i2c_send_start(lcd, base_data);
|
||||
lcdtg_i2c_send_byte(lcd, base_data, 0x9c);
|
||||
lcdtg_i2c_wait_ack(lcd, base_data);
|
||||
lcdtg_i2c_send_byte(lcd, base_data, 0x00);
|
||||
lcdtg_i2c_wait_ack(lcd, base_data);
|
||||
lcdtg_i2c_send_byte(lcd, base_data, data);
|
||||
lcdtg_i2c_wait_ack(lcd, base_data);
|
||||
lcdtg_i2c_send_stop(lcd, base_data);
|
||||
}
|
||||
|
||||
static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
|
||||
{
|
||||
struct spi_message msg;
|
||||
struct spi_transfer xfer = {
|
||||
.len = 1,
|
||||
.cs_change = 1,
|
||||
.tx_buf = lcd->buf,
|
||||
};
|
||||
|
||||
lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
|
||||
spi_message_init(&msg);
|
||||
spi_message_add_tail(&xfer, &msg);
|
||||
|
||||
return spi_sync(lcd->spi_dev, &msg);
|
||||
}
|
||||
|
||||
/* Set Phase Adjust */
|
||||
static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode)
|
||||
{
|
||||
int adj;
|
||||
|
||||
switch(mode) {
|
||||
case CORGI_LCD_MODE_VGA:
|
||||
/* Setting for VGA */
|
||||
adj = sharpsl_param.phadadj;
|
||||
adj = (adj < 0) ? PHACTRL_PHASE_MANUAL :
|
||||
PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1);
|
||||
break;
|
||||
case CORGI_LCD_MODE_QVGA:
|
||||
default:
|
||||
/* Setting for QVGA */
|
||||
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
|
||||
break;
|
||||
}
|
||||
|
||||
corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj);
|
||||
}
|
||||
|
||||
static void corgi_lcd_power_on(struct corgi_lcd *lcd)
|
||||
{
|
||||
int comadj;
|
||||
|
||||
/* Initialize Internal Logic & Port */
|
||||
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
|
||||
PICTRL_POWER_DOWN | PICTRL_INIOFF |
|
||||
PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF |
|
||||
PICTRL_DAC_SIGNAL_OFF);
|
||||
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
|
||||
POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
||||
|
||||
/* VDD(+8V), SVSS(-4V) ON */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
||||
mdelay(3);
|
||||
|
||||
/* DAC ON */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
||||
POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
/* INIB = H, INI = L */
|
||||
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
|
||||
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
|
||||
PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
|
||||
|
||||
/* Set Common Voltage */
|
||||
comadj = sharpsl_param.comadj;
|
||||
if (comadj < 0)
|
||||
comadj = DEFAULT_COMADJ;
|
||||
|
||||
lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
|
||||
POWER0_VCC5_OFF, comadj);
|
||||
|
||||
/* VCC5 ON, DAC ON */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
||||
POWER0_COM_OFF | POWER0_VCC5_ON);
|
||||
|
||||
/* GVSS(-8V) ON, VDD ON */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
||||
mdelay(2);
|
||||
|
||||
/* COM SIGNAL ON (PICTL[3] = L) */
|
||||
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE);
|
||||
|
||||
/* COM ON, DAC ON, VCC5_ON */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
||||
POWER0_COM_ON | POWER0_VCC5_ON);
|
||||
|
||||
/* VW ON, GVSS ON, VDD ON */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
|
||||
|
||||
/* Signals output enable */
|
||||
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0);
|
||||
|
||||
/* Set Phase Adjust */
|
||||
lcdtg_set_phadadj(lcd, lcd->mode);
|
||||
|
||||
/* Initialize for Input Signals from ATI */
|
||||
corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS,
|
||||
POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
|
||||
POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L |
|
||||
POLCTRL_EN_ACT_H);
|
||||
udelay(1000);
|
||||
|
||||
switch (lcd->mode) {
|
||||
case CORGI_LCD_MODE_VGA:
|
||||
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
|
||||
break;
|
||||
case CORGI_LCD_MODE_QVGA:
|
||||
default:
|
||||
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static void corgi_lcd_power_off(struct corgi_lcd *lcd)
|
||||
{
|
||||
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
|
||||
msleep(34);
|
||||
|
||||
/* (1)VW OFF */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
||||
|
||||
/* (2)COM OFF */
|
||||
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
|
||||
|
||||
/* (3)Set Common Voltage Bias 0V */
|
||||
lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
|
||||
POWER0_VCC5_ON, 0);
|
||||
|
||||
/* (4)GVSS OFF */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
||||
|
||||
/* (5)VCC5 OFF */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
/* (6)Set PDWN, INIOFF, DACOFF */
|
||||
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
|
||||
PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
|
||||
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
|
||||
|
||||
/* (7)DAC OFF */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
||||
POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
/* (8)VDD OFF */
|
||||
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
||||
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
||||
}
|
||||
|
||||
static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
|
||||
int mode = CORGI_LCD_MODE_QVGA;
|
||||
|
||||
if (m->xres == 640 || m->xres == 480)
|
||||
mode = CORGI_LCD_MODE_VGA;
|
||||
|
||||
if (lcd->mode == mode)
|
||||
return 0;
|
||||
|
||||
lcdtg_set_phadadj(lcd, mode);
|
||||
|
||||
switch (mode) {
|
||||
case CORGI_LCD_MODE_VGA:
|
||||
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
|
||||
break;
|
||||
case CORGI_LCD_MODE_QVGA:
|
||||
default:
|
||||
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
|
||||
break;
|
||||
}
|
||||
|
||||
lcd->mode = mode;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int corgi_lcd_set_power(struct lcd_device *ld, int power)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
|
||||
|
||||
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
|
||||
corgi_lcd_power_on(lcd);
|
||||
|
||||
if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
|
||||
corgi_lcd_power_off(lcd);
|
||||
|
||||
lcd->power = power;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int corgi_lcd_get_power(struct lcd_device *ld)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
|
||||
|
||||
return lcd->power;
|
||||
}
|
||||
|
||||
static struct lcd_ops corgi_lcd_ops = {
|
||||
.get_power = corgi_lcd_get_power,
|
||||
.set_power = corgi_lcd_set_power,
|
||||
.set_mode = corgi_lcd_set_mode,
|
||||
};
|
||||
|
||||
static int corgi_bl_get_intensity(struct backlight_device *bd)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
|
||||
|
||||
return lcd->intensity;
|
||||
}
|
||||
|
||||
static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
|
||||
{
|
||||
if (intensity > 0x10)
|
||||
intensity += 0x10;
|
||||
|
||||
corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
|
||||
lcd->intensity = intensity;
|
||||
|
||||
if (lcd->notify)
|
||||
lcd->notify(intensity);
|
||||
|
||||
if (lcd->kick_battery)
|
||||
lcd->kick_battery();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int corgi_bl_update_status(struct backlight_device *bd)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
|
||||
int intensity = bd->props.brightness;
|
||||
|
||||
if (bd->props.power != FB_BLANK_UNBLANK)
|
||||
intensity = 0;
|
||||
|
||||
if (bd->props.fb_blank != FB_BLANK_UNBLANK)
|
||||
intensity = 0;
|
||||
|
||||
return corgi_bl_set_intensity(lcd, intensity);
|
||||
}
|
||||
|
||||
static struct backlight_ops corgi_bl_ops = {
|
||||
.get_brightness = corgi_bl_get_intensity,
|
||||
.update_status = corgi_bl_update_status,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
|
||||
|
||||
corgi_bl_set_intensity(lcd, 0);
|
||||
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int corgi_lcd_resume(struct spi_device *spi)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
|
||||
|
||||
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
|
||||
backlight_update_status(lcd->bl_dev);
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
#define corgi_lcd_suspend NULL
|
||||
#define corgi_lcd_resume NULL
|
||||
#endif
|
||||
|
||||
static int __devinit corgi_lcd_probe(struct spi_device *spi)
|
||||
{
|
||||
struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
|
||||
struct corgi_lcd *lcd;
|
||||
int ret = 0;
|
||||
|
||||
if (pdata == NULL) {
|
||||
dev_err(&spi->dev, "platform data not available\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
lcd = kzalloc(sizeof(struct corgi_lcd), GFP_KERNEL);
|
||||
if (!lcd) {
|
||||
dev_err(&spi->dev, "failed to allocate memory\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
lcd->spi_dev = spi;
|
||||
|
||||
lcd->lcd_dev = lcd_device_register("corgi_lcd", &spi->dev,
|
||||
lcd, &corgi_lcd_ops);
|
||||
if (IS_ERR(lcd->lcd_dev)) {
|
||||
ret = PTR_ERR(lcd->lcd_dev);
|
||||
goto err_free_lcd;
|
||||
}
|
||||
lcd->power = FB_BLANK_POWERDOWN;
|
||||
lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
|
||||
|
||||
lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev,
|
||||
lcd, &corgi_bl_ops);
|
||||
if (IS_ERR(lcd->bl_dev)) {
|
||||
ret = PTR_ERR(lcd->bl_dev);
|
||||
goto err_unregister_lcd;
|
||||
}
|
||||
lcd->bl_dev->props.max_brightness = pdata->max_intensity;
|
||||
lcd->bl_dev->props.brightness = pdata->default_intensity;
|
||||
lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
|
||||
|
||||
lcd->notify = pdata->notify;
|
||||
lcd->kick_battery = pdata->kick_battery;
|
||||
|
||||
dev_set_drvdata(&spi->dev, lcd);
|
||||
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
|
||||
backlight_update_status(lcd->bl_dev);
|
||||
return 0;
|
||||
|
||||
err_unregister_lcd:
|
||||
lcd_device_unregister(lcd->lcd_dev);
|
||||
err_free_lcd:
|
||||
kfree(lcd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit corgi_lcd_remove(struct spi_device *spi)
|
||||
{
|
||||
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
|
||||
|
||||
lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
|
||||
lcd->bl_dev->props.brightness = 0;
|
||||
backlight_update_status(lcd->bl_dev);
|
||||
backlight_device_unregister(lcd->bl_dev);
|
||||
|
||||
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
|
||||
lcd_device_unregister(lcd->lcd_dev);
|
||||
kfree(lcd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct spi_driver corgi_lcd_driver = {
|
||||
.driver = {
|
||||
.name = "corgi-lcd",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = corgi_lcd_probe,
|
||||
.remove = __devexit_p(corgi_lcd_remove),
|
||||
.suspend = corgi_lcd_suspend,
|
||||
.resume = corgi_lcd_resume,
|
||||
};
|
||||
|
||||
static int __init corgi_lcd_init(void)
|
||||
{
|
||||
return spi_register_driver(&corgi_lcd_driver);
|
||||
}
|
||||
module_init(corgi_lcd_init);
|
||||
|
||||
static void __exit corgi_lcd_exit(void)
|
||||
{
|
||||
spi_unregister_driver(&corgi_lcd_driver);
|
||||
}
|
||||
module_exit(corgi_lcd_exit);
|
||||
|
||||
MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
|
||||
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
16
include/linux/spi/corgi_lcd.h
Normal file
16
include/linux/spi/corgi_lcd.h
Normal file
@ -0,0 +1,16 @@
|
||||
#ifndef __LINUX_SPI_CORGI_LCD_H
|
||||
#define __LINUX_SPI_CORGI_LCD_H
|
||||
|
||||
#define CORGI_LCD_MODE_QVGA 1
|
||||
#define CORGI_LCD_MODE_VGA 2
|
||||
|
||||
struct corgi_lcd_platform_data {
|
||||
int init_mode;
|
||||
int max_intensity;
|
||||
int default_intensity;
|
||||
|
||||
void (*notify)(int intensity);
|
||||
void (*kick_battery)(void);
|
||||
};
|
||||
|
||||
#endif /* __LINUX_SPI_CORGI_LCD_H */
|
||||
Loading…
Reference in New Issue
Block a user