iio: mcp4531: Driver for Microchip digital potentiometers
Add support for Microchip digital potentiometers and rheostats MCP4531, MCP4532, MCP4551, MCP4552 MCP4631, MCP4632, MCP4651, MCP4652 DEVICE Wipers Steps Resistor Opts (kOhm) i2c address MCP4531 1 129 5, 10, 50, 100 010111x MCP4532 1 129 5, 10, 50, 100 01011xx MCP4551 1 257 5, 10, 50, 100 010111x MCP4552 1 257 5, 10, 50, 100 01011xx MCP4631 2 129 5, 10, 50, 100 0101xxx MCP4632 2 129 5, 10, 50, 100 01011xx MCP4651 2 257 5, 10, 50, 100 0101xxx MCP4652 2 257 5, 10, 50, 100 01011xx Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Peter Rosin
Jonathan Cameron
parent
b15aef8d5b
commit
c05dc2cce7
|
|
@ -6682,6 +6682,12 @@ W: http://linuxtv.org
|
|||
S: Maintained
|
||||
F: drivers/media/radio/radio-maxiradio*
|
||||
|
||||
MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVER
|
||||
M: Peter Rosin <peda@axentia.se>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/iio/potentiometer/mcp4531.c
|
||||
|
||||
MEDIA DRIVERS FOR RENESAS - VSP1
|
||||
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
|
|
|
|||
|
|
@ -60,6 +60,7 @@ source "drivers/iio/orientation/Kconfig"
|
|||
if IIO_TRIGGER
|
||||
source "drivers/iio/trigger/Kconfig"
|
||||
endif #IIO_TRIGGER
|
||||
source "drivers/iio/potentiometer/Kconfig"
|
||||
source "drivers/iio/pressure/Kconfig"
|
||||
source "drivers/iio/proximity/Kconfig"
|
||||
source "drivers/iio/temperature/Kconfig"
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@ obj-y += imu/
|
|||
obj-y += light/
|
||||
obj-y += magnetometer/
|
||||
obj-y += orientation/
|
||||
obj-y += potentiometer/
|
||||
obj-y += pressure/
|
||||
obj-y += proximity/
|
||||
obj-y += temperature/
|
||||
|
|
|
|||
20
drivers/iio/potentiometer/Kconfig
Normal file
20
drivers/iio/potentiometer/Kconfig
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
#
|
||||
# Potentiometer drivers
|
||||
#
|
||||
# When adding new entries keep the list in alphabetical order
|
||||
|
||||
menu "Digital potentiometers"
|
||||
|
||||
config MCP4531
|
||||
tristate "Microchip MCP45xx/MCP46xx Digital Potentiometer driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to build support for the Microchip
|
||||
MCP4531, MCP4532, MCP4551, MCP4552,
|
||||
MCP4631, MCP4632, MCP4651, MCP4652
|
||||
digital potentiomenter chips.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called mcp4531.
|
||||
|
||||
endmenu
|
||||
6
drivers/iio/potentiometer/Makefile
Normal file
6
drivers/iio/potentiometer/Makefile
Normal file
|
|
@ -0,0 +1,6 @@
|
|||
#
|
||||
# Makefile for industrial I/O potentiometer drivers
|
||||
#
|
||||
|
||||
# When adding new entries keep the list in alphabetical order
|
||||
obj-$(CONFIG_MCP4531) += mcp4531.o
|
||||
231
drivers/iio/potentiometer/mcp4531.c
Normal file
231
drivers/iio/potentiometer/mcp4531.c
Normal file
|
|
@ -0,0 +1,231 @@
|
|||
/*
|
||||
* Industrial I/O driver for Microchip digital potentiometers
|
||||
* Copyright (c) 2015 Axentia Technologies AB
|
||||
* Author: Peter Rosin <peda@axentia.se>
|
||||
*
|
||||
* Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf
|
||||
*
|
||||
* DEVID #Wipers #Positions Resistor Opts (kOhm) i2c address
|
||||
* mcp4531 1 129 5, 10, 50, 100 010111x
|
||||
* mcp4532 1 129 5, 10, 50, 100 01011xx
|
||||
* mcp4551 1 257 5, 10, 50, 100 010111x
|
||||
* mcp4552 1 257 5, 10, 50, 100 01011xx
|
||||
* mcp4631 2 129 5, 10, 50, 100 0101xxx
|
||||
* mcp4632 2 129 5, 10, 50, 100 01011xx
|
||||
* mcp4651 2 257 5, 10, 50, 100 0101xxx
|
||||
* mcp4652 2 257 5, 10, 50, 100 01011xx
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/err.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
|
||||
struct mcp4531_cfg {
|
||||
int wipers;
|
||||
int max_pos;
|
||||
int kohms;
|
||||
};
|
||||
|
||||
enum mcp4531_type {
|
||||
MCP453x_502,
|
||||
MCP453x_103,
|
||||
MCP453x_503,
|
||||
MCP453x_104,
|
||||
MCP455x_502,
|
||||
MCP455x_103,
|
||||
MCP455x_503,
|
||||
MCP455x_104,
|
||||
MCP463x_502,
|
||||
MCP463x_103,
|
||||
MCP463x_503,
|
||||
MCP463x_104,
|
||||
MCP465x_502,
|
||||
MCP465x_103,
|
||||
MCP465x_503,
|
||||
MCP465x_104,
|
||||
};
|
||||
|
||||
static const struct mcp4531_cfg mcp4531_cfg[] = {
|
||||
[MCP453x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
|
||||
[MCP453x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
|
||||
[MCP453x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
|
||||
[MCP453x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
|
||||
[MCP455x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
|
||||
[MCP455x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
|
||||
[MCP455x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
|
||||
[MCP455x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
|
||||
[MCP463x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
|
||||
[MCP463x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
|
||||
[MCP463x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
|
||||
[MCP463x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
|
||||
[MCP465x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
|
||||
[MCP465x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
|
||||
[MCP465x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
|
||||
[MCP465x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
|
||||
};
|
||||
|
||||
#define MCP4531_WRITE (0 << 2)
|
||||
#define MCP4531_INCR (1 << 2)
|
||||
#define MCP4531_DECR (2 << 2)
|
||||
#define MCP4531_READ (3 << 2)
|
||||
|
||||
#define MCP4531_WIPER_SHIFT (4)
|
||||
|
||||
struct mcp4531_data {
|
||||
struct i2c_client *client;
|
||||
unsigned long devid;
|
||||
};
|
||||
|
||||
#define MCP4531_CHANNEL(ch) { \
|
||||
.type = IIO_RESISTANCE, \
|
||||
.indexed = 1, \
|
||||
.output = 1, \
|
||||
.channel = (ch), \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec mcp4531_channels[] = {
|
||||
MCP4531_CHANNEL(0),
|
||||
MCP4531_CHANNEL(1),
|
||||
};
|
||||
|
||||
static int mcp4531_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct mcp4531_data *data = iio_priv(indio_dev);
|
||||
int address = chan->channel << MCP4531_WIPER_SHIFT;
|
||||
s32 ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
ret = i2c_smbus_read_word_swapped(data->client,
|
||||
MCP4531_READ | address);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = ret;
|
||||
return IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
*val = 1000 * mcp4531_cfg[data->devid].kohms;
|
||||
*val2 = mcp4531_cfg[data->devid].max_pos;
|
||||
return IIO_VAL_FRACTIONAL;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int mcp4531_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val, int val2, long mask)
|
||||
{
|
||||
struct mcp4531_data *data = iio_priv(indio_dev);
|
||||
int address = chan->channel << MCP4531_WIPER_SHIFT;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
if (val > mcp4531_cfg[data->devid].max_pos || val < 0)
|
||||
return -EINVAL;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return i2c_smbus_write_byte_data(data->client,
|
||||
MCP4531_WRITE | address | (val >> 8),
|
||||
val & 0xff);
|
||||
}
|
||||
|
||||
static const struct iio_info mcp4531_info = {
|
||||
.read_raw = mcp4531_read_raw,
|
||||
.write_raw = mcp4531_write_raw,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int mcp4531_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
unsigned long devid = id->driver_data;
|
||||
struct mcp4531_data *data;
|
||||
struct iio_dev *indio_dev;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_WORD_DATA)) {
|
||||
dev_err(dev, "SMBUS Word Data not supported\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
data = iio_priv(indio_dev);
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
data->client = client;
|
||||
data->devid = devid;
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->info = &mcp4531_info;
|
||||
indio_dev->channels = mcp4531_channels;
|
||||
indio_dev->num_channels = mcp4531_cfg[devid].wipers;
|
||||
indio_dev->name = client->name;
|
||||
|
||||
return devm_iio_device_register(dev, indio_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id mcp4531_id[] = {
|
||||
{ "mcp4531-502", MCP453x_502 },
|
||||
{ "mcp4531-103", MCP453x_103 },
|
||||
{ "mcp4531-503", MCP453x_503 },
|
||||
{ "mcp4531-104", MCP453x_104 },
|
||||
{ "mcp4532-502", MCP453x_502 },
|
||||
{ "mcp4532-103", MCP453x_103 },
|
||||
{ "mcp4532-503", MCP453x_503 },
|
||||
{ "mcp4532-104", MCP453x_104 },
|
||||
{ "mcp4551-502", MCP455x_502 },
|
||||
{ "mcp4551-103", MCP455x_103 },
|
||||
{ "mcp4551-503", MCP455x_503 },
|
||||
{ "mcp4551-104", MCP455x_104 },
|
||||
{ "mcp4552-502", MCP455x_502 },
|
||||
{ "mcp4552-103", MCP455x_103 },
|
||||
{ "mcp4552-503", MCP455x_503 },
|
||||
{ "mcp4552-104", MCP455x_104 },
|
||||
{ "mcp4631-502", MCP463x_502 },
|
||||
{ "mcp4631-103", MCP463x_103 },
|
||||
{ "mcp4631-503", MCP463x_503 },
|
||||
{ "mcp4631-104", MCP463x_104 },
|
||||
{ "mcp4632-502", MCP463x_502 },
|
||||
{ "mcp4632-103", MCP463x_103 },
|
||||
{ "mcp4632-503", MCP463x_503 },
|
||||
{ "mcp4632-104", MCP463x_104 },
|
||||
{ "mcp4651-502", MCP465x_502 },
|
||||
{ "mcp4651-103", MCP465x_103 },
|
||||
{ "mcp4651-503", MCP465x_503 },
|
||||
{ "mcp4651-104", MCP465x_104 },
|
||||
{ "mcp4652-502", MCP465x_502 },
|
||||
{ "mcp4652-103", MCP465x_103 },
|
||||
{ "mcp4652-503", MCP465x_503 },
|
||||
{ "mcp4652-104", MCP465x_104 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mcp4531_id);
|
||||
|
||||
static struct i2c_driver mcp4531_driver = {
|
||||
.driver = {
|
||||
.name = "mcp4531",
|
||||
},
|
||||
.probe = mcp4531_probe,
|
||||
.id_table = mcp4531_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(mcp4531_driver);
|
||||
|
||||
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
|
||||
MODULE_DESCRIPTION("MCP4531 digital potentiometer");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user