powerpc/asm: Convert .llong directives to .8byte

.llong is an undocumented PPC specific directive. The generic
equivalent is .quad, but even better (because it's self describing) is
.8byte.

Convert all .llong directives to .8byte.

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/boot/crt0.S

@@ -26,17 +26,17 @@ _zimage_start_opd:
 
 #ifdef __powerpc64__
 .balign 8
-p_start:	.llong	_start
-p_etext:	.llong	_etext
-p_bss_start:	.llong	__bss_start
-p_end:		.llong	_end
+p_start:	.8byte	_start
+p_etext:	.8byte	_etext
+p_bss_start:	.8byte	__bss_start
+p_end:		.8byte	_end
 
-p_toc:		.llong	__toc_start + 0x8000 - p_base
-p_dyn:		.llong	__dynamic_start - p_base
-p_rela:		.llong	__rela_dyn_start - p_base
-p_prom:		.llong	0
+p_toc:		.8byte	__toc_start + 0x8000 - p_base
+p_dyn:		.8byte	__dynamic_start - p_base
+p_rela:		.8byte	__rela_dyn_start - p_base
+p_prom:		.8byte	0
 	.weak	_platform_stack_top
-p_pstack:	.llong	_platform_stack_top
+p_pstack:	.8byte	_platform_stack_top
 #else
 p_start:	.long	_start
 p_etext:	.long	_etext

arch/powerpc/include/asm/asm-compat.h

@@ -25,7 +25,7 @@
 #define PPC_LCMPI	stringify_in_c(cmpdi)
 #define PPC_LCMPLI	stringify_in_c(cmpldi)
 #define PPC_LCMP	stringify_in_c(cmpd)
-#define PPC_LONG	stringify_in_c(.llong)
+#define PPC_LONG	stringify_in_c(.8byte)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
 #define PPC_TLNEI	stringify_in_c(tdnei)
 #define PPC_LLARX(t, a, b, eh)	PPC_LDARX(t, a, b, eh)

arch/powerpc/include/asm/feature-fixups.h

@@ -19,11 +19,11 @@
  */
 #if defined(CONFIG_PPC64) && !defined(__powerpc64__)
 /* 64 bits kernel, 32 bits code (ie. vdso32) */
-#define FTR_ENTRY_LONG		.llong
+#define FTR_ENTRY_LONG		.8byte
 #define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
 #elif defined(CONFIG_PPC64)
-#define FTR_ENTRY_LONG		.llong
-#define FTR_ENTRY_OFFSET	.llong
+#define FTR_ENTRY_LONG		.8byte
+#define FTR_ENTRY_OFFSET	.8byte
 #else
 #define FTR_ENTRY_LONG		.long
 #define FTR_ENTRY_OFFSET	.long

arch/powerpc/include/asm/reg.h

@@ -1344,12 +1344,12 @@ static inline void msr_check_and_clear(unsigned long bits)
 				".section __ftr_fixup,\"a\"\n"		\
 				".align 3\n"				\
 				"98:\n"					\
-				"	.llong %1\n"			\
-				"	.llong %1\n"			\
-				"	.llong 97b-98b\n"		\
-				"	.llong 99b-98b\n"		\
-				"	.llong 0\n"			\
-				"	.llong 0\n"			\
+				"	.8byte %1\n"			\
+				"	.8byte %1\n"			\
+				"	.8byte 97b-98b\n"		\
+				"	.8byte 99b-98b\n"		\
+				"	.8byte 0\n"			\
+				"	.8byte 0\n"			\
 				".previous"				\
 			: "=r" (rval) \
 			: "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL) : "cr0"); \

arch/powerpc/kernel/entry_64.S

@@ -1104,7 +1104,7 @@ _ASM_NOKPROBE_SYMBOL(__enter_rtas)
 _ASM_NOKPROBE_SYMBOL(rtas_return_loc)
 
 	.align	3
-1:	.llong	rtas_restore_regs
+1:	.8byte	rtas_restore_regs
 
 rtas_restore_regs:
 	/* relocation is on at this point */

arch/powerpc/kernel/head_64.S

@@ -92,13 +92,13 @@ END_FTR_SECTION(0, 1)
 	.balign 8
 	.globl  __secondary_hold_spinloop
 __secondary_hold_spinloop:
-	.llong	0x0
+	.8byte	0x0
 
 	/* Secondary processors write this value with their cpu # */
 	/* after they enter the spin loop immediately below.	  */
 	.globl	__secondary_hold_acknowledge
 __secondary_hold_acknowledge:
-	.llong	0x0
+	.8byte	0x0
 
 #ifdef CONFIG_RELOCATABLE
 	/* This flag is set to 1 by a loader if the kernel should run
@@ -650,7 +650,7 @@ __after_prom_start:
 	bctr
 
 .balign 8
-p_end: .llong _end - copy_to_here
+p_end: .8byte _end - copy_to_here
 
 4:
 	/*
@@ -892,7 +892,7 @@ _GLOBAL(relative_toc)
 	blr
 
 .balign 8
-p_toc:	.llong	__toc_start + 0x8000 - 0b
+p_toc:	.8byte	__toc_start + 0x8000 - 0b
 
 /*
  * This is where the main kernel code starts.

arch/powerpc/kernel/reloc_64.S

@@ -82,7 +82,7 @@ _GLOBAL(relocate)
 6:	blr
 
 .balign 8
-p_dyn:	.llong	__dynamic_start - 0b
-p_rela:	.llong	__rela_dyn_start - 0b
-p_st:	.llong	_stext - 0b
+p_dyn:	.8byte	__dynamic_start - 0b
+p_rela:	.8byte	__rela_dyn_start - 0b
+p_st:	.8byte	_stext - 0b
 

arch/powerpc/kernel/systbl.S

@@ -17,13 +17,13 @@
 #include <asm/ppc_asm.h>
 
 #ifdef CONFIG_PPC64
-#define SYSCALL(func)		.llong	DOTSYM(sys_##func),DOTSYM(sys_##func)
-#define COMPAT_SYS(func)	.llong	DOTSYM(sys_##func),DOTSYM(compat_sys_##func)
-#define PPC_SYS(func)		.llong	DOTSYM(ppc_##func),DOTSYM(ppc_##func)
-#define OLDSYS(func)		.llong	DOTSYM(sys_ni_syscall),DOTSYM(sys_ni_syscall)
-#define SYS32ONLY(func)		.llong	DOTSYM(sys_ni_syscall),DOTSYM(compat_sys_##func)
-#define PPC64ONLY(func)		.llong	DOTSYM(ppc_##func),DOTSYM(sys_ni_syscall)
-#define SYSX(f, f3264, f32)	.llong	DOTSYM(f),DOTSYM(f3264)
+#define SYSCALL(func)		.8byte	DOTSYM(sys_##func),DOTSYM(sys_##func)
+#define COMPAT_SYS(func)	.8byte	DOTSYM(sys_##func),DOTSYM(compat_sys_##func)
+#define PPC_SYS(func)		.8byte	DOTSYM(ppc_##func),DOTSYM(ppc_##func)
+#define OLDSYS(func)		.8byte	DOTSYM(sys_ni_syscall),DOTSYM(sys_ni_syscall)
+#define SYS32ONLY(func)		.8byte	DOTSYM(sys_ni_syscall),DOTSYM(compat_sys_##func)
+#define PPC64ONLY(func)		.8byte	DOTSYM(ppc_##func),DOTSYM(sys_ni_syscall)
+#define SYSX(f, f3264, f32)	.8byte	DOTSYM(f),DOTSYM(f3264)
 #else
 #define SYSCALL(func)		.long	sys_##func
 #define COMPAT_SYS(func)	.long	sys_##func

arch/powerpc/platforms/powernv/opal-wrappers.S

@@ -27,7 +27,7 @@
 
 	.globl opal_tracepoint_refcount
 opal_tracepoint_refcount:
-	.llong	0
+	.8byte	0
 
 	.section	".text"
 

arch/powerpc/platforms/pseries/hvCall.S

@@ -23,7 +23,7 @@
 
 	.globl hcall_tracepoint_refcount
 hcall_tracepoint_refcount:
-	.llong	0
+	.8byte	0
 
 	.section	".text"
 #endif

arch/powerpc/purgatory/trampoline.S

@@ -104,13 +104,13 @@ master:
 	.balign 8
 	.globl kernel
 kernel:
-	.llong  0x0
+	.8byte  0x0
 	.size kernel, . - kernel
 
 	.balign 8
 	.globl dt_offset
 dt_offset:
-	.llong  0x0
+	.8byte  0x0
 	.size dt_offset, . - dt_offset
 
 

tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S

@@ -8,7 +8,7 @@ message:
 	.section ".toc"
 	.balign 8
 pattern:
-	.llong 0x5555AAAA5555AAAA
+	.8byte 0x5555AAAA5555AAAA
 
 	.text
 FUNC_START(_start)