i_alloc_sem is a rather special rw_semaphore. It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion. It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.
Replace it with a hand-grown construct:
- exclusion for truncates is already guaranteed by i_mutex, so it can
simply fall way
- the reader side is replaced by an i_dio_count member in struct inode
that counts the number of pending direct I/O requests. Truncate can't
proceed as long as it's non-zero
- when i_dio_count reaches non-zero we wake up a pending truncate using
wake_up_bit on a new bit in i_flags
- new references to i_dio_count can't appear while we are waiting for
it to read zero because the direct I/O count always needs i_mutex
(or an equivalent like XFS's i_iolock) for starting a new operation.
This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reject zero sized reads as soon as we know our I/O length, and don't
borther with locks or allocations that might have to be cleaned up
otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rewrite ext4_page_mkwrite() to use __block_page_mkwrite() helper. This
removes the need of using i_alloc_sem to avoid races with truncate which
seems to be the wrong locking order according to lock ordering documented in
mm/rmap.c. Also calling ext4_da_write_begin() as used by the old code seems to
be problematic because we can decide to flush delay-allocated blocks which
will acquire s_umount semaphore - again creating unpleasant lock dependency
if not directly a deadlock.
Also add a check for frozen filesystem so that we don't busyloop in page fault
when the filesystem is frozen.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new rw_semaphore to protect bmap against truncate. Previous
i_alloc_sem was abused for this, but it's going away in this series.
Note that we can't simply use i_mutex, given that the swapon code
calls ->bmap under it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The flags parameter went away in
d749519b444db985e40b897f73ce1898b11f997e
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the inode reclaim shrinker to use the new per-sb shrinker
operations. This allows much bigger reclaim batches to be used, and
allows the XFS inode cache to be shrunk in proportion with the VFS
dentry and inode caches. This avoids the problem of the VFS caches
being shrunk significantly before the XFS inode cache is shrunk
resulting in imbalances in the caches during reclaim.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that the per-sb shrinker is responsible for shrinking 2 or more
caches, increase the batch size to keep econmies of scale for
shrinking each cache. Increase the shrinker batch size to 1024
objects.
To allow for a large increase in batch size, add a conditional
reschedule to prune_icache_sb() so that we don't hold the LRU spin
lock for too long. This mirrors the behaviour of the
__shrink_dcache_sb(), and allows us to increase the batch size
without needing to worry about problems caused by long lock hold
times.
To ensure that filesystems using the per-sb shrinker callouts don't
cause problems, document that the object freeing method must
reschedule appropriately inside loops.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now we have a per-superblock shrinker implementation, we can add a
filesystem specific callout to it to allow filesystem internal
caches to be shrunk by the superblock shrinker.
Rather than perpetuate the multipurpose shrinker callback API (i.e.
nr_to_scan == 0 meaning "tell me how many objects freeable in the
cache), two operations will be added. The first will return the
number of objects that are freeable, the second is the actual
shrinker call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that we have per-sb shrinkers with a lifecycle that is a subset
of the superblock lifecycle and can reliably detect a filesystem
being unmounted, there is not longer any race condition for the
iprune_sem to protect against. Hence we can remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With context based shrinkers, we can implement a per-superblock
shrinker that shrinks the caches attached to the superblock. We
currently have global shrinkers for the inode and dentry caches that
split up into per-superblock operations via a coarse proportioning
method that does not batch very well. The global shrinkers also
have a dependency - dentries pin inodes - so we have to be very
careful about how we register the global shrinkers so that the
implicit call order is always correct.
With a per-sb shrinker callout, we can encode this dependency
directly into the per-sb shrinker, hence avoiding the need for
strictly ordering shrinker registrations. We also have no need for
any proportioning code for the shrinker subsystem already provides
this functionality across all shrinkers. Allowing the shrinker to
operate on a single superblock at a time means that we do less
superblock list traversals and locking and reclaim should batch more
effectively. This should result in less CPU overhead for reclaim and
potentially faster reclaim of items from each filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The per-sb shrinker has the same requirement as the writeback
threads of ensuring that the superblock is usable and pinned for the
time it takes to run the work. Both need to take a passive reference
to the sb, take a read lock on the s_umount lock and then only
continue if an unmount is not in progress.
pin_sb_for_writeback() does this exactly, so move it to fs/super.c
and rename it to grab_super_passive() and exporting it via
fs/internal.h for all the VFS code to be able to use.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the inode LRUs moving to per-sb structures, there is no longer
a need for a global inode_lru_lock. The locking can be made more
fine-grained by moving to a per-sb LRU lock, isolating the LRU
operations of different filesytsems completely from each other.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The inode unused list is currently a global LRU. This does not match
the other global filesystem cache - the dentry cache - which uses
per-superblock LRU lists. Hence we have related filesystem object
types using different LRU reclaimation schemes.
To enable a per-superblock filesystem cache shrinker, both of these
caches need to have per-sb unused object LRU lists. Hence this patch
converts the global inode LRU to per-sb LRUs.
The patch only does rudimentary per-sb propotioning in the shrinker
infrastructure, as this gets removed when the per-sb shrinker
callouts are introduced later on.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before we split up the inode_lru_lock, the unused inode counter
needs to be made independent of the global inode_lru_lock. Convert
it to per-cpu counters to do this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
d_splice_alias(NULL, dentry) is equivalent to d_add(dentry, NULL), NULL
so no need for that if (inode) ... in there (or ERR_PTR(0), for that
matter)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New helper (non-exported, fs/internal.h-only): __d_alloc(sb, name).
Allocates dentry, sets its ->d_sb to given superblock and sets
->d_op accordingly. Old d_alloc(NULL, name) callers are converted
to that (all of them know what superblock they want). d_alloc()
itself is left only for parent != NULl case; uses __d_alloc(),
inserts result into the list of parent's children.
Note that now ->d_sb is assign-once and never NULL *and*
->d_parent is never NULL either.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
combination of kern_path_parent() and lookup_create(). Does *not*
expose struct nameidata to caller. Syscalls converted to that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of playing with removal of LOOKUP_OPEN, mangling (and
restoring) nd->path, just pass NULL to vfs_create(). The whole
point of what's being done there is to suppress any attempts
to open file by underlying fs, which is what nd == NULL indicates.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) check the right flags in ->create() (LOOKUP_OPEN, not LOOKUP_CREATE)
b) default (!LOOKUP_OPEN) open_flags is O_CREAT|O_EXCL|FMODE_READ, not 0
c) lookup_instantiate_filp() should be done only with LOOKUP_OPEN;
otherwise we need to issue CLOSE, lest we leak stateid on server.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and get rid of a bogus typecast, while we are at it; it's not
just that we want a function returning int and not void, but cast
to pointer to function taking void * and returning void would be
(void (*)(void *)) and not (void *)(void *), TYVM...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pass mask instead; kill security_inode_exec_permission() since we can use
security_inode_permission() instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
