Commit Graph

796712 Commits

Author SHA1 Message Date
Linus Torvalds
82aa467151 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) BPF verifier fixes from Daniel Borkmann.

 2) HNS driver fixes from Huazhong Tan.

 3) FDB only works for ethernet devices, reject attempts to install FDB
    rules for others. From Ido Schimmel.

 4) Fix spectre V1 in vhost, from Jason Wang.

 5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2
    driver, from Marc Zyngier.

 6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
  openvswitch: Fix push/pop ethernet validation
  net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
  bpf: test make sure to run unpriv test cases in test_verifier
  bpf: add various test cases to test_verifier
  bpf: don't set id on after map lookup with ptr_to_map_val return
  bpf: fix partial copy of map_ptr when dst is scalar
  libbpf: Fix compile error in libbpf_attach_type_by_name
  kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
  selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
  selftests: mlxsw: qos_mc_aware: Tweak for min shaper
  mlxsw: spectrum: Set minimum shaper on MC TCs
  mlxsw: reg: QEEC: Add minimum shaper fields
  net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
  net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
  net: hns3: bugfix for handling mailbox while the command queue reinitialized
  net: hns3: fix incorrect return value/type of some functions
  net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
  net: hns3: bugfix for is_valid_csq_clean_head()
  net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
  net: hns3: bugfix for the initialization of command queue's spin lock
  ...
2018-11-01 09:16:01 -07:00
Linus Torvalds
ffb845db50 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
 "Two small fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Wire up compat getpeername and getsockname.
  sparc64: Remvoe set_fs() from perf_callchain_user().
2018-11-01 09:07:04 -07:00
Linus Torvalds
5c99a8d1ed csky: dtb Kbuild fixup patches for linux-4.20-rc1
These patches are complementary to "C-SKY(csky) Port for Linux 4.20" and
 fixup dtb Kbuild to follow the new Devicetree dtb build rules.
 
 Link: https://lore.kernel.org/lkml/CABGGisxiWaQn9qDqpfxEWcckkGJfMzFvSPGvuhQK7oB404-6DQ@mail.gmail.com/
 Signed-off-by: Guo Ren <ren_guo@c-sky.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE2KAv+isbWR/viAKHAXH1GYaIxXsFAlvadMUSHHJlbl9ndW9A
 Yy1za3kuY29tAAoJEAFx9RmGiMV7fN4P/ieygi8RlzFF5PEggQEt1PdvGnte2Kx/
 UUqlX7ZrY/ZY8p/XaG8p0YlWx236YcZoQtTJT4ThVuAFyywuIjR96kWlKwVjeKC2
 /lfXvQrJRSjzQAQU2zRe+KMEvsEw0qEO9WWqV8pORt+t1ZjE59mFov2iK+mcS22R
 T12Djp7V9RYr33KFcu8BQ8g4524t9x3MSGVz+AB/D+cni8XSS3dkg5QlTWo+LGfS
 pHAISI3t1AftXkQ3HRpDKFs9Equ0CX3wm129j6awWHbYBpXsdwUW81fr+KMNgdd/
 s59wcdRInksww5ZaAvtgfxYJeTTyu488KMEMhagDNn3n0El61ui0vncmvPebnmjB
 FQb4v6AvH69V2aN3/xAKuov4EfELoFUc/E0z3GJk//58d6kshMdyI++QB2CFZ8IS
 TqHSkkEKCpThTyJavGuS0Jvkj7vpneW5iDFQwWN0RqIub7PnC6Aa0uSw+/G7Pq/5
 SY2zhEJ0o6waBuQR5IEYzxvRwlU3hNuqXe7/if4kqw/LQUFTydKX7eQAcrSTLlnI
 /jxrXH7vaymhD9/wI58GPIsqaRObln92uaUWHpjQqKPXdnemv60dSta2LLkdY4Le
 MVsTc412nkFjt4Ft+uOrcJQnVsK48RTh56vBB44zxONoK9tUz0y6wgIEyebwzRSy
 uYaZ6t0jj7A3
 =TO13
 -----END PGP SIGNATURE-----

Merge tag 'csky-for-linus-4.20-fixup-dtb' of https://github.com/c-sky/csky-linux

Pull csky dtb fixups from Guo Ren:
 "These fix the csky dtb Kbuild to follow the new Devicetree dtb build
  rules"

* tag 'csky-for-linus-4.20-fixup-dtb' of https://github.com/c-sky/csky-linux:
  csky: use common dtb build rules
  csky: remove builtin-dtb Kbuild
2018-11-01 09:04:30 -07:00
Linus Torvalds
eb7046e9bf platform-drivers-x86 for v4.20-1
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as
 they are closely coupled with other drivers in this location.
 
 Improve _init* usage for acerhdf and fix some usage issues with messages
 and module parameters.
 
 Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
 workqueue overhead, eliminate double reporting of keyboard backlight.
 
 Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
 
 Notify intel_telemetry users when IPC1 device is not enabled.
 
 Update various drivers with new laptop model IDs.
 
 Update several intel drivers to use SPDX identifers and order headers
 alphabetically.
 
 The following is an automated git shortlog grouped by driver:
 
 Add Intel AtomISP2 dummy / power-management driver:
  - Add Intel AtomISP2 dummy / power-management driver
 
 lg-laptop:
  - Add LG Gram laptop special features driver
 
 HID:
  -  asus: only support backlight when it's not driven by WMI
 
 MAINTAINERS:
  -  intel_telemetry: Update maintainers info
  -  intel_pmc_core: Update MAINTAINERS
  -  Update maintainer for dcdbas and dell_rbu
  -  Use my infradead account exclusively for PDx86 work
 
 acerhdf:
  -  restructure to allow large BIOS table be __initconst
  -  mark appropriate content with __init prefix
  -  Add BIOS entry for Gateway LT31 v1.3307
  -  Remove cut-and-paste trap from instructions
  -  Enable ability to list supported systems
  -  clarify modinfo messages for BIOS override
 
 asus-wmi:
  -  export function for evaluating WMI methods
  -  Only notify kbd LED hw_change by fn-key pressed
  -  Simplify the keyboard brightness updating process
 
 firmware:
  -  dcdbas: include linux/io.h
  -  dcdbas: Move dcdbas to drivers/platform/x86
  -  dell_rbu: Move dell_rbu to drivers/platform/x86
  -  dcdbas: Add support for WSMT ACPI table
  -  dell_rbu: Make payload memory uncachable
 
 ideapad-laptop:
  -  Add Y530-15ICH to no_hw_rfkill
  -  Use __func__ instead of read_ec_cmd in pr_err
 
 intel-hid:
  -  Convert to use SPDX identifier
 
 intel-ips:
  -  Convert to use SPDX identifier
 
 intel-rst:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel-smartconnect:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel-wmi-thunderbolt:
  -  Add dynamic debugging
  -  Convert to use SPDX identifier
 
 intel_bxtwc_tmu:
  -  Convert to use SPDX identifier
 
 intel_cht_int33fe:
  -  Convert to use SPDX identifier
 
 intel_chtdc_ti_pwrbtn:
  -  Add SPDX identifier
 
 intel_int0002_vgpio:
  -  Convert to use SPDX identifier
  -  Implement irq_set_wake
  -  Enable the driver on Bay Trail platforms
 
 intel_menlow:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_mid_powerbtn:
  -  Convert to use SPDX identifier
  -  Remove unnecessary init.h inclusion
  -  Get rid of custom ICPU() macro
 
 intel_mid_thermal:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_oaktrail:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_pmc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_punit_ipc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_scu_ipc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_telemetry:
  -  Get rid of custom macro
  -  report debugfs failure
  -  Convert to use SPDX identifier
 
 intel_turbo_max_3:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 mlx-platform:
  -  Properly use mlxplat_mlxcpld_msn201x_items
 
 touchscreen_dmi:
  -  Add min-x and min-y settings for various models
  -  Add info for the Onda V80 Plus v3 tablet
  -  Add info for the Trekstor Primetab T13B tablet
  -  Add info for the Trekstor Primebook C11 convertible
 
 tracing:
  -  Trivia spelling fix containerof() -> container_of()
 
 wmi:
  -  declare device_type structure as constant
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn
 0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74
 c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd
 3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y
 QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8
 pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY=
 =0BDZ
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
   as they are closely coupled with other drivers in this location.

 - Improve _init* usage for acerhdf and fix some usage issues with
   messages and module parameters.

 - Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
   workqueue overhead, eliminate double reporting of keyboard backlight.

 - Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).

 - Notify intel_telemetry users when IPC1 device is not enabled.

 - Update various drivers with new laptop model IDs.

 - Update several intel drivers to use SPDX identifers and order headers
   alphabetically.

* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  HID: asus: only support backlight when it's not driven by WMI
  platform/x86: asus-wmi: export function for evaluating WMI methods
  platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
  platform/x86: wmi: declare device_type structure as constant
  platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
  platform/x86: Add Intel AtomISP2 dummy / power-management driver
  platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
  platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
  platform/x86: intel_telemetry: Get rid of custom macro
  platform/x86: intel_telemetry: report debugfs failure
  MAINTAINERS: intel_telemetry: Update maintainers info
  platform/x86: Add LG Gram laptop special features driver
  platform/x86: asus-wmi: Simplify the keyboard brightness updating process
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
  platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
  MAINTAINERS: intel_pmc_core: Update MAINTAINERS
  firmware: dcdbas: include linux/io.h
  platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
  platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
  ...
2018-11-01 08:42:21 -07:00
Petr Vorel
2cd3faf87d merge_config.sh: Allow to define config prefix
with CONFIG_ environment variable.

merge_config.sh uses CONFIG_ which is used in kernel and other projects.
There are some projects which use kconfig with different prefixes (e.g.
buildroot: BR2_ prefix). CONFIG_ variable is already used for this
purpose in kconfig binary (scripts/kconfig/lkc.h), let's use the same
rule for in merge_config.sh.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:26 +09:00
Masahiro Yamada
3f80babd9c kbuild: remove unused cc-fullversion variable
The last user of cc-fullversion was removed by commit f2910f0e68
("powerpc: remove old GCC version checks").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:26 +09:00
Masahiro Yamada
0085b4191f kconfig: remove silentoldconfig target
As commit 911a91c39c ("kconfig: rename silentoldconfig to
syncconfig") announced, it is time for the removal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-02 00:15:25 +09:00
Masahiro Yamada
04c459d204 kconfig: remove oldnoconfig target
As commit 312ee68752 ("kconfig: announce removal of oldnoconfig if
used") announced, it is time for the removal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:25 +09:00
Christoph Hellwig
a15687ca7b powerpc: PCI_MSI needs PCI
Various powerpc boards select the PCI_MSI config option without selecting
PCI, resulting in potentially not compilable configurations if the by
default enabled PCI option is disabled.  Explicitly select PCI to ensure
we always have valid configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:25 +09:00
Christoph Hellwig
c8bf9212d1 powerpc: remove CONFIG_MCA leftovers
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:24 +09:00
Christoph Hellwig
3905361b72 powerpc: remove CONFIG_PCI_QSPAN
This option isn't actually used anywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:24 +09:00
Christoph Hellwig
3eb2ebcb8e scsi: aha152x: rename the PCMCIA define
We plan to enable building the PCMCIA core and drivers, and the
non-prefixed PCMCIA name clashes with some arch headers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:23 +09:00
Christian König
9d064be1e6 drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default"
This is still completely breaking my Raven system.

This reverts commit cdf2f910fa969adca1b0e3ad2b487821233dc038.

Revert until we sort out the sbios and firmware combinations that work
correctly.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=108606
Cc: stable@vger.kernel.org # v4.19

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01 09:56:56 -05:00
Rex Zhu
a4c3f247ee drm/amd/pp: Print warning if od_sclk/mclk out of range
print warning in dmesg to notify user the setting for
sclk_od/mclk_od out of range that vbios can support

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01 09:52:43 -05:00
Rex Zhu
47fdd89753 drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10
not update dpm table with user's setting.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01 09:52:33 -05:00
Rex Zhu
17c7c7e714 drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7
not update the dpm table with user's setting

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01 09:52:24 -05:00
Evan Quan
5be3bb6e92 drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled
As MGPU fan boost feature will be definitely not needed when
DPM is disabled. So, there is no need to error out.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01 09:52:12 -05:00
Andrey Grodzovsky
734afd4b21 drm/amdgpu: Fix skipping hangged job reset during gpu recover.
Problem:
During GPU recover DAL would hang in
amdgpu_pm_compute_clocks->amdgpu_fence_wait_empty

Fix:
Turns out there was a typo introduced by
3320b8d drm/amdgpu: remove job->ring which caused skipping
amdgpu_fence_driver_force_completion and so the hangged job
was never force signaled and this would cause the hang later in DAL.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01 09:51:33 -05:00
Serge Semin
a662315d8a ntb: idt: Alter the driver info comments
Since IDT PCIe-switch temperature sensor is now always available
irregardless of the EEPROM/BIOS settings, Kconfig and in-code
description should be properly altered. In addition lets update
the driver copyright lines.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01 10:33:12 -04:00
Serge Semin
b8babacbae ntb: idt: Discard temperature sensor IRQ handler
IDT PCIe-switch temperature sensor interface is very broken. First
of all only a few combinations of TMPCTL threshold enable bits
really cause the interrupts unmasked. Even if an individual bit
indicates the event unmasked, corresponding IRQ just isn't generated.
Most of the threshold enable bits combinations are in fact useless and
non of them can help to create a fully functional alarm interface.
So to speak, we can't create a well defined hwmon alarms based on
the IDT PCI-switch threshold IRQs.

Secondly a single threshold IRQ (not a combination of thresholds) can
be successfully enabled without the issue described above. But in this
case we experienced an enormous number of interrupts generated by
the chip if the temperature got near the enabled threshold value. Filter
adjustment didn't help much. It also doesn't provide a hysteresis settings.
Due to the temperature sample fluctuations near the threshold the
interrupts spate makes the system nearly unusable until the temperature
value finally settled so being pushed either to be fully higher or lower
the threshold.

All of these issues makes the temperature sensor alarm interface useless
and even at some point dangerous to be used in the driver. In this case
it is safer to completely discard it and disable the temperature alarm
interrupts.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01 10:33:12 -04:00
Serge Semin
aed1b7b311 ntb: idt: Add basic hwmon sysfs interface
IDT PCIe switches provide an embedded temperature sensor working
within [0; 127.5]C with resolution of 0.5C. They also can generate
a PCIe upstream interrupt in case if the temperature passes through
specified thresholds. Since this thresholds interface is very broken
the created hwmon-sysfs interface exposes only the next set of hwmon
nodes: current input temperature, lowest and highest values measured,
history resetting, value offset. HWmon alarm interface isn't provided.

IDT PCIe switch also've got an ADC/filter settings of the sensor.
This driver doesn't expose them to the hwmon-sysfs interface at the
moment, except the offset node.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01 10:33:12 -04:00
Serge Semin
40070408f5 ntb: idt: Alter temperature read method
In order to create a hwmon interface for the IDT PCIe-switch temperature
sensor the already available reader method should be improved. Particularly
we need to redesign it so one would be able to read temperature/offset
values from registers of the passed types. Since IDT sensor interface
provides temperature in unsigned format 0:7:1 (7 bits for real value
and one for fraction) we also need to have helpers for the typical sysfs
temperature data type conversion to and from this format. Even though
the IDT PCIe-switch provided temperature offset got the same but signed
type it can be translated by these methods too.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01 10:33:12 -04:00
Dmitry Safonov
98f76206b3 compat: Cleanup in_compat_syscall() callers
Now that in_compat_syscall() is consistent on all architectures and does
not longer report true on native i686, the workarounds (ifdeffery and
helpers) can be removed.

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-efi@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/r/20181012134253.23266-3-dima@arista.com
2018-11-01 13:02:21 +01:00
Dmitry Safonov
a846446b19 x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
The result of in_compat_syscall() can be pictured as:

x86 platform:
    ---------------------------------------------------
    |  Arch\syscall  |  64-bit  |   ia32   |   x32    |
    |-------------------------------------------------|
    |     x86_64     |  false   |   true   |   true   |
    |-------------------------------------------------|
    |      i686      |          |  <true>  |          |
    ---------------------------------------------------

Other platforms:
    -------------------------------------------
    |  Arch\syscall  |  64-bit  |   compat    |
    |-----------------------------------------|
    |     64-bit     |  false   |    true     |
    |-----------------------------------------|
    |    32-bit(?)   |          |   <false>   |
    -------------------------------------------

As seen, the result of in_compat_syscall() on generic 32-bit platform
differs from i686.

There is no reason for in_compat_syscall() == true on native i686.  It also
easy to misread code if the result on native 32-bit platform differs
between arches.

Because of that non arch-specific code has many places with:
    if (IS_ENABLED(CONFIG_COMPAT) && in_compat_syscall())
in different variations.

It looks-like the only non-x86 code which uses in_compat_syscall() not
under CONFIG_COMPAT guard is in amd/amdkfd. But according to the commit
a18069c132 ("amdkfd: Disable support for 32-bit user processes"), it
actually should be disabled on native i686.

Rename in_compat_syscall() to in_32bit_syscall() for x86-specific code
and make in_compat_syscall() false under !CONFIG_COMPAT.

A follow on patch will clean up generic users which were forced to check
IS_ENABLED(CONFIG_COMPAT) with in_compat_syscall().

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-efi@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/r/20181012134253.23266-2-dima@arista.com
2018-11-01 12:59:25 +01:00
Dan Carpenter
3424243e39 irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function
The devm_ioremap_resource() function never returns NULL, it returns
error pointers.

Fixes: 61ce8d8d8a ("irqchip/irq-mvebu-sei: Add new driver for Marvell SEI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20181013102246.GD16086@mwanda
2018-11-01 12:38:48 +01:00
Michael Kelley
57f01796f1 irq/matrix: Fix memory overallocation
IRQ_MATRIX_SIZE is the number of longs needed for a bitmap, multiplied by
the size of a long, yielding a byte count. But it is used to size an array
of longs, which is way more memory than is needed.

Change IRQ_MATRIX_SIZE so it is just the number of longs needed and the
arrays come out the correct size.

Fixes: 2f75d9e1c9 ("genirq: Implement bitmap matrix allocator")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: KY Srinivasan <kys@microsoft.com>
Link: https://lkml.kernel.org/r/1541032428-10392-1-git-send-email-mikelley@microsoft.com
2018-11-01 10:00:38 +01:00
Josh Poimboeuf
bcb6fb5da7 objtool: Support GCC 9 cold subfunction naming scheme
Starting with GCC 8, a lot of unlikely code was moved out of line to
"cold" subfunctions in .text.unlikely.

For example, the unlikely bits of:

  irq_do_set_affinity()

are moved out to the following subfunction:

  irq_do_set_affinity.cold.49()

Starting with GCC 9, the numbered suffix has been removed.  So in the
above example, the cold subfunction is instead:

  irq_do_set_affinity.cold()

Tweak the objtool subfunction detection logic so that it detects both
GCC 8 and GCC 9 naming schemes.

Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/015e9544b1f188d36a7f02fa31e9e95629aa5f50.1541040800.git.jpoimboe@redhat.com
2018-11-01 09:55:38 +01:00
Guo Ren
e8d0c9a726 csky: use common dtb build rules
Remove the Kbuild rules in arch/csky and use common dtb build rules.

This modification is based on:

commit 37c8a5fafa ("kbuild: consolidate Devicetree dtb build rules")

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-11-01 10:52:27 +08:00
Guo Ren
c4c14c3bd1 csky: remove builtin-dtb Kbuild
Remove the builtin-dtb implementation in arch/csky.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-11-01 10:52:26 +08:00
Jaime Caamaño Ruiz
46ebe2834b openvswitch: Fix push/pop ethernet validation
When there are both pop and push ethernet header actions among the
actions to be applied to a packet, an unexpected EINVAL (Invalid
argument) error is obtained. This is due to mac_proto not being reset
correctly when those actions are validated.

Reported-at:
https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html
Fixes: 91820da6ae ("openvswitch: add Ethernet push and pop actions")
Signed-off-by: Jaime Caamaño Ruiz <jcaamano@suse.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:37:16 -07:00
Niklas Cassel
30549aab14 net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC,
or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set.
The only exception is CONFIG_STMMAC_PCI.

When calling of_mdiobus_register(), it will call our ->reset()
callback, which is set to stmmac_mdio_reset().

Most of the code in stmmac_mdio_reset() is protected by a
"#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate
to false when CONFIG_STMMAC_PLATFORM=m.

Because of this, the phy reset gpio will only be pulled when
stmmac is built as built-in, but not when built as modules.

Fix this by using "#if IS_ENABLED()" instead of "#if defined()".

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:35:58 -07:00
David S. Miller
1f2b5b8e2d sparc64: Wire up compat getpeername and getsockname.
Fixes: 8b30ca73b7 ("sparc: Add all necessary direct socket system calls.")
Reported-by: Joseph Myers  <joseph@codesourcery.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:30:21 -07:00
David S. Miller
4d3163cf87 Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-10-31

This series contains a various collection of fixes.

Miroslav Lichvar from Red Hat or should I say IBM now?  Updates the PHC
timecounter interval for igb so that it gets updated at least once
every 550 seconds.

Ngai-Mint provides a fix for fm10k to prevent a soft lockup or system
crash by adding a new condition to determine if the SM mailbox is in the
correct state before proceeding.

Jake provides several fm10k fixes, first one marks complier aborts as
non-fatal since on some platforms trigger machine check errors when the
compile aborts.  Added missing device ids to the in-kernel driver.  Due
to the recent fixes, bumped the driver version.

I (Jeff Kirsher) fixed a XFRM_ALGO dependency for both ixgbe and
ixgbevf.  This fix was based on the original work from Arnd Bergmann,
which only fixed ixgbe.

Mitch provides a fix for i40e/avf to update the status codes, which
resolves an issue between a mis-match between i40e and the iavf driver,
which also supports the ice LAN driver.

Radoslaw fixes the ixgbe where the driver is logging a message about
spoofed packets detected when the VF is re-started with a different MAC
address.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 18:21:37 -07:00
Aaron Sierra
906e86b22d ntb_netdev: Simplify remove with client device drvdata
Replace the elaborate private structure global linked-list used in
ntb_netdev_probe() and ntb_netdev_remove() by stashing our private
data in the NTB transport client device.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31 21:20:05 -04:00
Aaron Sierra
fc5d1829f9 NTB: transport: Try harder to alloc an aligned MW buffer
Be a little wasteful if the (likely CMA) message window buffer is not
suitably aligned after our first attempt; allocate a buffer twice as big
as we need and manually align our MW buffer within it.

This was needed on Intel Broadwell DE platforms with intel_iommu=off

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31 21:20:05 -04:00
Gustavo A. R. Silva
846429bc99 ntb: ntb_transport: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1373888 ("Missing break in switch")
Addresses-Coverity-ID: 1373889 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31 21:20:05 -04:00
Serge Semin
37a3e9693d ntb: idt: Set PCIe bus address to BARLIMITx
IDT NTB driver sets the upper limit of actual translation address
being written to the corresponding memory window setup. It is achieved
by BARLIMITx register initialization. Needless to say, that the register
works within PCIe bus address space.

In general CPU and PCIe address spaces are different. It means,
that addresses used for Memory TLPs routine can be different from
CPU addresses. While in most of cases they are the same, there are
exceptions when the proper mapping must be performed to have the
portable driver code. There used to be a virt_to_bus()/bus_to_virt()
interface for this purpose. But it's deprecated now. It was also a
mistake to use pci_resource_start() since the return address of the
method is at the CPU address space. In order to achieve the desired
purpose we need to use pci_bus_address() helper. This method shall
return a PCIe bus base address of the corresponding BAR resource.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31 21:20:05 -04:00
David S. Miller
df975da4e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-11-01

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix tcp_bpf_recvmsg() to return -EAGAIN instead of 0 in non-blocking
   case when no data is available yet, from John.

2) Fix a compilation error in libbpf_attach_type_by_name() when compiled
   with clang 3.8, from Andrey.

3) Fix a partial copy of map pointer on scalar alu and remove id
   generation for RET_PTR_TO_MAP_VALUE return types, from Daniel.

4) Add unlimited memlock limit for kernel selftest's flow_dissector_load
   program, from Yonghong.

5) Fix ping for some BPF shell based kselftests where distro does not
   ship "ping -6" anymore, from Li.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 17:34:08 -07:00
Alexei Starovoitov
dfeb8f4c96 Merge branch 'verifier-fixes'
Daniel Borkmann says:

====================
The series contains two fixes in BPF core and test cases. For details
please see individual patches. Thanks!
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:18 -07:00
Daniel Borkmann
832c6f2c29 bpf: test make sure to run unpriv test cases in test_verifier
Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann
2683f4128c bpf: add various test cases to test_verifier
Add some more map related test cases to test_verifier kselftest
to improve test coverage. Summary: 1012 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann
4d31f30148 bpf: don't set id on after map lookup with ptr_to_map_val return
In the verifier there is no such semantics where registers with
PTR_TO_MAP_VALUE type have an id assigned to them. This is only
used in PTR_TO_MAP_VALUE_OR_NULL and later on nullified once the
test against NULL has been pattern matched and type transformed
into PTR_TO_MAP_VALUE.

Fixes: 3e6a4b3e02 ("bpf/verifier: introduce BPF_PTR_TO_MAP_VALUE")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Daniel Borkmann
0962590e55 bpf: fix partial copy of map_ptr when dst is scalar
ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.

Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-31 16:53:17 -07:00
Linus Torvalds
5b7449810a chrome-platform for v4.20
* Move mfd/cros_ec_lpc* includes to drivers/platform from mfd
 * Adding a new interrupt path for cros_ec_lpc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlvaNx8ACgkQHwn1ewov
 5li9/g//apJnCEFTCNoxsQlqj15io3Osogpm3uPw85u5OzkSgs9aSTTlzjcf6gYO
 nowl2vn009fI0vPEdOqIj1KOw2F2ATHyRFXl4Ap0HOF8eERGKS46SLSy93cUvdxc
 rAeHY23lJ/3/7nrJTMnIbFxpukNR7RgoXPlGRb3Gj6me879nTNr68YU48lvTJIM1
 dS5m19joL/JnR93iPZwf9PTI6C95eYFgalCMfwBYDAhk4sk7Ovk1LMsoLh9vT1i2
 xBW16AaF0CgEJbiCc57ktbN/Fkt/tdcdiZmn+hvXvRFOOu3HDXvoXOJa/IxBgruk
 mgVzvBordNIiSdPN9T4Cof17NJiU58RtcfFe+GuftUJ8S5NSPQbelch+Pfa+cknn
 zvEwv/0rLWvWmu1cmkHCLq2QdHxaNIiGMuIxIDZfhihGn1kTcD/FTgX5nt3hVYRk
 yVSKe/1ed6yCnYvSQ6x3uprBGpMayJCaSco/lQzWX6Iqe6eEXOYxm43YsQmddPLA
 jnzJlmfuAb6lyvdgD5mrGkV/3/GdYp/t5OUUefTnhPWsfS1l/aaqeDvyVNuqsMGp
 EyeYz+9Nilc17G8iuXw272/YZF6JhL7CO7vjxKqyRIaDUjj2HBzMUZ+NrgPg08AJ
 MHRBltRT/LayKg5e/9tKylF1UhstMli7sldX6qRXL1A8q6vYWC4=
 =cmQo
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome-platform updates from Benson Leung:

 - Move mfd/cros_ec_lpc* includes to drivers/platform from mfd

 - Adding a new interrupt path for cros_ec_lpc

* tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: chromeos_tbmc - Remove unneeded const
  platform/chrome: Add a new interrupt path for cros_ec_lpc
  mfd: cros_ec: Fix and improve kerneldoc comments.
  platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
2018-10-31 16:47:55 -07:00
A.s. Dong
012ebc3b78 MAINTAINERS: add maintainer for IMX LPI2C driver
The LPI2C is used in IMX7ULP/MX8 SoCs.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:37:34 +00:00
A.s. Dong
69819c7fc8 dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
Add imx8qxp compatible string

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:36:43 +00:00
Charles Keepax
6f108dd70d i2c: Clear client->irq in i2c_device_remove
The IRQ will be mapped in i2c_device_probe only if client->irq is zero and
i2c_device_remove does not clear this. When rebinding an I2C device,
whos IRQ provider has also been rebound this means that an IRQ mapping
will never be created, causing the I2C device to fail to acquire its
IRQ. Fix this issue by clearing client->irq in i2c_device_remove,
forcing i2c_device_probe to lookup the mapping again.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:33:34 +00:00
Charles Keepax
b9bb3fdf4e i2c: Remove unnecessary call to irq_find_mapping
irq_create_mapping calls irq_find_mapping internally and will use the
found mapping if one exists, so there is no need to manually call this
from i2c_smbus_host_notify_to_irq.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31 23:33:14 +00:00
Linus Torvalds
3dca04d694 RISC-V Patches for the 4.20 Merge Window, Part 2 v2
This tag contains the follow-on patches I'd like to target for the 4.20
 merge window.  I'm being somewhat conservative here, as while there are
 a few patches on the mailing list that were posted early in the merge
 window I'd like to let those bake for another round -- this was a fairly
 big release as far as RISC-V is concerened, and we need to walk before
 we can run.
 
 As far as the patches that made it go:
 
 * A patch to ignore offline CPUs when calculating AT_HWCAP.  This should
   fix GDB on the HiFive unleashed, which has an embedded core for hart
   0 which is exposed to Linux as an offline CPU.
 * A move of EM_RISCV to elf-em.h, which is where it should have been to
   begin with.
 * I've also removed the 64-bit divide routines.  I know I'm not really
   playing by my own rules here because I posted the patches this
   morning, but since they shouldn't be in the kernel I think it's better
   to err on the side of going too fast here.
 
 I don't anticipate any more patch sets for the merge window.
 
 Changes since v1:
 
 * Use a consistent base to merge from so the history isn't a mess.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlvZ//ITHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQaOqEACpJTs19+1HFQ/YSB4P+drIImDq9XNF
 OFElcqe+R961BnyHJUA4WObl0Bl9bDqciYhelwdeb/0gYaOBG5IsmwAKxN9N2f9d
 m2/3eVUyiwMDKsc8Mrdcu7e3TLvfnhfaSOVe9hDvVcSeZvaC4S+dr+b7gjOZd45o
 52SQqj6TMh20g5h6knaU5wnhHriJH7U4MwiEmwSTZuUkKj8Uoa1HGyzuVqqhi6A2
 3y0m4VmVTwS9dmork2xZdsif+POSxrRxdtMTMWf85FelSO1OdTeMemUx2WnnWlCU
 5VoPF5upXWB6uVtgXAVC8yhjCke5mUIOMcO10UGXdcjS/q9Vfg0yt6LusijTmYec
 UznnpnkPOap3t6tb+dkRanP+BRphB6A9DpXUkiGGo2nwbi48OC+pTYjZMdRUX7r3
 FHq3LknprDfK6+D6goftlXlYSmb8H2rSCubK5dv6Zq9/rkBAkN/ESo9HEXvtPrAh
 oQAU1kmjq1EQg87fpmMvVySLApj+YPCoNMaPn3be03JRup4vaoGo8obmVP7rqgAG
 BIq6gx2BqqWWNvJftFm85AurTC1K3ClLO0mgTD5zhHvaCTHNI0TLlYh58QcKU00j
 c6+u+6tMF00Nvk8n/cbC/hRc2T+oAGb6hr6pFQEhANAkMu9dYpYfOWRbYl7Iiszq
 J3eT+7rxvHXCpg==
 =9Lsg
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull more RISC-V updates from Palmer Dabbelt:
 "This contains the follow-on patches I'd like to target for the 4.20
  merge window. I'm being somewhat conservative here, as while there are
  a few patches on the mailing list that were posted early in the merge
  window I'd like to let those bake for another round -- this was a
  fairly big release as far as RISC-V is concerened, and we need to walk
  before we can run.

  As far as the patches that made it go:

   - A patch to ignore offline CPUs when calculating AT_HWCAP. This
     should fix GDB on the HiFive unleashed, which has an embedded core
     for hart 0 which is exposed to Linux as an offline CPU.

   - A move of EM_RISCV to elf-em.h, which is where it should have been
     to begin with.

   - I've also removed the 64-bit divide routines. I know I'm not really
     playing by my own rules here because I posted the patches this
     morning, but since they shouldn't be in the kernel I think it's
     better to err on the side of going too fast here.

  I don't anticipate any more patch sets for the merge window"

* tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  Move EM_RISCV into elf-em.h
  RISC-V: properly determine hardware caps
  Revert "lib: Add umoddi3 and udivmoddi4 of GCC library routines"
  Revert "RISC-V: Select GENERIC_LIB_UMODDI3 on RV32"
2018-10-31 16:20:28 -07:00
Naveen N. Rao
1936f094e1 selftests/powerpc: Fix compilation issue due to asm label
We are using 'dscr_insn' as a label in inline asm to identify if a
SIGILL was generated by the mtspr instruction at that point. However,
with inline assembly, the compiler is still free to duplicate the asm
statement for optimization purposes, which results in the label being
defined twice with the error:
	/tmp/ccerQCql.s:874: Error: symbol `dscr_insn' is already defined

With different compiler versions, we may also see:
	/tmp/ccJzLDlN.o:(.toc+0x0): undefined reference to `dscr_insn'

Remove the use of the label in the inline assembly. Instead, just look
for the offending instruction in the signal handler.

Fixes: d2bf793237 ("selftests/powerpc: Add test to verify rfi flush across a system call")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-01 10:06:03 +11:00