Add the irqs disabled, preemption count, need resched, and other
info that is shown in the latency format of ftrace.
# perf trace -l
perf-16457 2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f
perf-16457 2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f
perf-16457 2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.076588953@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace output events can have either arguments or no
arguments. The parser needs to be able to handle both.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.790221427@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The bprintk parsing was broken in more ways than one.
The file parsing was incorrect, and the words used by the
arguments are always 4 bytes aligned, even on 64-bit machines.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.520931637@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Even though an event may fail to parse, we should not kill the
entire report. The trace should still be able to show what it
can.
If an event fails to parse, a warning is printed, and the output
continues.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.190809589@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The trace format files now have a "signed" field. But we should
still be able to handle the kernels that do not have this field.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.888239553@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
New lines between args in the trace format can break the
parsing. This should not be the case.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.637991808@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The '*' is currently only treated as a multiplication, and it
needs to be handled as a typecast pointer.
This is the version used by trace-cmd.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.409327875@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The array used by the ftrace stack events (caller[x]) causes
issues with the parser. This adds code to handle the case, but
it also assumes that the array is of type long.
Note, this is a special case used (currently) only by the ftrace
user and kernel stack records.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.124833639@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The code to handle the '<' and '>' ops was all in place, but
they were not in the switch statement to consider them as valid
ops.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.807434040@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The handling of backslashes was broken. It would stop parsing
when encountering one. Also, '\n', '\t', '\r' and '\\' were not
converted.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.521974680@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kmem_alloc ftrace event format had a string that was broken up
by two tokens. "string 1" "string 2". This patch lets the parser
be able to handle the concatenation.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.253818714@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This was just being copy'n'pasted all over.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091013141629.GD21809@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Calling gettimeofday() at high frequency is painful for handicapped
boxen. The spot calling gettimeofday() is old unneeded debug code,
so remove it.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1255438640.7173.1.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use strlen & macros instead of manually counting string lengths as
this is error prone and may lend to bugs.
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Cc: Linus Torvalds <torvalds@osdl.org>
LKML-Reference: <4727185d0910130118m5387058dndb02ac9b384af9f0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Timechart doesn't work if debugfs is not in /sys/kernel/debug/.
Fixed by using global debugfs_path which is filled in by perf.
Signed-off-by: Ashwin Chaugule <ashwinc@quicinc.com>
Cc: "Arjan van de Ven" <arjan@linux.intel.com>
LKML-Reference: <a751bdc6978478de6d10440e587a2cc7.squirrel@www.codeaurora.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Randy Dunlap reported that 'make NO_64BIT=1' fails to build
a pure 32-b it binary on 64-bit/64-bit x86 systems.
The reason is that we dont pass in the -m32 and GCC defaults
to -m64.
So pass it in - and also extend the warning message about libelf
dependencies - glibc-dev[el] is needed as well beyond the libelf
library.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: Message-Id: <20091005131729.78444bfb.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 42e59d7d19 switched to a default sample frequency of
1KHz, which overrides any user supplied count, causing sched, top
and timechart to miss events due to their discrete events
being flagged PERF_SAMPLE_PERIOD.
Override default sample frequency when the user profides a
period count, and make both record and top honor that user
supplied option.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <1255326963.15107.2.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The following perf build warnings/errors in function
argument types:
builtin-sched.c:1894: warning: passing argument 1 of 'sort_dimension__add' discards qualifiers from pointer target type
util/trace-event-parse.c:685: warning: passing argument 2 of 'read_expected' discards qualifiers from pointer target type
util/trace-event-parse.c:741: warning: passing argument 4 of 'test_type_token' discards qualifiers from pointer target type
util/trace-event-parse.c:706: warning: passing argument 2 of 'read_expected_item' discards qualifiers from pointer target type
... trigger because older GCC is not able to prove that
sort_dimension__add() does not change the string.
Some goes for test_type_token().
Fix this by improving type consistency.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091005131729.78444bfb.randy.dunlap@oracle.com>
[ Also remove ugly type cast now unnecessary. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have merged the trace.info file into perf.data by adding one
section in the perf headers. This makes it incompatible with
previous version: the new perf tools can't read the older
perf.data.
To support the previous format, we check the headers size. If they
have the same size than in the previous format, then ignore the
trace info section that doesn't exist.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255032449-12022-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 9a92b479b2 ("perf
tools: Improve thread comm resolution in perf sched") and fixes the
real bug.
The bug was elsewhere:
We are failing to resolve thread names in perf sched because the
table of threads we are building, on top of comm events, has a per
process granularity. But perf sched, unlike the other perf tools,
needs a per thread granularity as we are profiling every tasks
individually.
So fix it by building our threads table using the tid instead of
the pid as the thread identifier.
v2: Revert the previous fix - it is not really needed
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255028657-11158-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This removes the ovelapping of vmlinux addresses with modules,
using the ELF section name when using --vmlinux and creating a
unique DSO name when using /proc/kallsyms ([kernel].N).
This is done by creating multiple 'struct map' instances for
address ranges backed by DSOs that have just the symbols for that
range and a name that is derived from the ELF section name.o
Now it is possible to ask for just the symbols in some particular
kernel section:
$ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \
--dsos [kernel].vsyscall_fn | head -15
52.73% Xorg [.] vread_hpet
18.61% firefox [.] vread_hpet
14.50% npviewer.bin [.] vread_hpet
6.83% compiz [.] vread_hpet
5.73% glxgears [.] vread_hpet
0.63% java [.] vread_hpet
0.30% gnome-terminal [.] vread_hpet
0.23% perf [.] vread_hpet
0.18% xchat [.] vread_hpet
$
Now we don't have to first lookup the list of modules and then, if
it fails, vmlinux symbols, its just a simple lookup for the map
then the symbols, just like for threads.
Reports generated using /proc/kallsyms and --vmlinux should provide
the same results, modulo the DSO name for sections other than
".text".
But they don't right now because things like:
ffffffff81011c20-ffffffff81012068 system_call
ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs
ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath
ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call
I.e. overlapping symbols, again some ASM special case that we have
to fixup.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Like printing every symbol created.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254923340-4870-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we get sched traces that involve a task that was already
created before opening the event, we won't have the comm event for
it.
So if we can't find the comm event for a given thread, we look at
the traces that may contain these informations.
Before:
ata/1:371 | 0.000 ms | 1 | avg: 3988.693 ms | max: 3988.693 ms |
kondemand/1:421 | 0.096 ms | 3 | avg: 345.346 ms | max: 1035.989 ms |
kondemand/0:420 | 0.025 ms | 3 | avg: 421.332 ms | max: 964.014 ms |
:5124:5124 | 0.103 ms | 5 | avg: 74.082 ms | max: 277.194 ms |
:6244:6244 | 0.691 ms | 9 | avg: 125.655 ms | max: 271.306 ms |
firefox:5080 | 0.924 ms | 5 | avg: 53.833 ms | max: 257.828 ms |
npviewer.bin:6225 | 21.871 ms | 53 | avg: 22.462 ms | max: 220.835 ms |
:6245:6245 | 9.631 ms | 21 | avg: 41.864 ms | max: 213.349 ms |
After:
ata/1:371 | 0.000 ms | 1 | avg: 3988.693 ms | max: 3988.693 ms |
kondemand/1:421 | 0.096 ms | 3 | avg: 345.346 ms | max: 1035.989 ms |
kondemand/0:420 | 0.025 ms | 3 | avg: 421.332 ms | max: 964.014 ms |
firefox:5124 | 0.103 ms | 5 | avg: 74.082 ms | max: 277.194 ms |
npviewer.bin:6244 | 0.691 ms | 9 | avg: 125.655 ms | max: 271.306 ms |
firefox:5080 | 0.924 ms | 5 | avg: 53.833 ms | max: 257.828 ms |
npviewer.bin:6225 | 21.871 ms | 53 | avg: 22.462 ms | max: 220.835 ms |
npviewer.bin:6245 | 9.631 ms | 21 | avg: 41.864 ms | max: 213.349 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255012632-7882-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.
TODO:
- convert perf timechart too
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This drops the trace.info file and move its contents into the
common perf.data file.
This is done by creating a new trace_info section into this file. A
user of perf headers needs to call perf_header__set_trace_info() to
save the trace meta informations into the perf.data file.
A file created by perf after his patch is unsupported by previous
version because the size of the headers have increased.
That said, it's two new fields that have been added in the end of
the headers, and those could be ignored by previous versions if
they just handled the dynamic header size and then ignore the
unknow part. The offsets guarantee the compatibility. We'll do a
-stable fix for that.
But current previous versions handle the header size using its
static size, not dynamic, then it's not backward compatible with
trace records.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091006213643.GA5343@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, we are mapping perf.data in the beginning of the file
and use the data offset as a buffer offset.
This may exceed the mapping area if the data offset is upper than
page_size * mmap_window and result in a page fault (thing that
happen if we merge trace.info in perf.data).
Instead, let's start the mapping in the page that matches our data
offset.
v2: Drop a junk from another patch (trace_report() removal)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1254856886-10348-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use auto-freq events by default in perf record and
perf top.
This allows more consistent hardware event sampling,
regardless of the intensity of the underlying event.
It also keeps us from over-sampling on larger/busier
systems.
(also make surrounding initializations more consistent)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The sign info used for filters in the kernel is also useful to
applications that process the trace stream. Add it to the format
files and make it available to userspace.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.
These architectures typically have to use vmalloc_user() for this.
However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Asm routines that end up having size equal to zero are not really
zero sized, and as now we do kernel_maps__fixup_sym_end, at least
for kernel routines this gets fixed.
A similar fixup needs to be done for the userspace bits as well,
but as this fixup started only because in /proc/kallsyms we don't
have the end address nor the function size, it appeared here first.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254796503-27203-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In resolve_symbol, as we're moving to breaking the kernel symbols
list per address ranges, i.e. kernel linking sections, so that we
don't have a big kernel_map that in its range covers what is in the
modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we get kallsyms processing closer to vmlinux + modules
symtabs processing.
One change in behaviour is that since when one specifies --vmlinux
-m should be used to ask for modules, so it is now for kallsyms as
well.
Also continue if one manages to load the vmlinux data but module
processing fails, so that at least some analisys can be done with
part of the needed symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we launch the child on behalf of the user, ensure that it dies
along with ourselves when we are interrupted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
LKML-Reference: <1254616502-4728-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now perf report and annotate do the callgraph/hit processing in
their specialized hist_entry__add functions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.
DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.
As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:
[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
84.58% 13266 Xorg [k] drm_clflush_pages
4.02% 630 Xorg [k] trace_kmalloc.clone.0
3.95% 619 Xorg [k] drm_ioctl
2.07% 324 Xorg [k] drm_addbufs
1.68% 263 Xorg [k] drm_gem_close_ioctl
0.77% 120 Xorg [k] drm_setmaster_ioctl
0.70% 110 Xorg [k] drm_lastclose
0.68% 106 Xorg [k] drm_open
0.54% 85 Xorg [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#
Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.
Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.
struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.
The total linecount went down by ~500 lines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Right now generate-cmdlist.sh is not executable, so we
should call it as an argument ".".
This fixes cases where due to different umask defaults
the generate-cmdlist.sh script is not executable in
a kernel tree checkout.
Signed-off-by: Mulyadi Santosa <mulyadi.santosa@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <f284c33d0909251201w422e9687x8cd3a784e85adf7d@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For doing work on the Linux power management components, I need to
make long (30+ seconds) traces. Currently, this then results in a
HUGE svg file, with mostly process data that isn't interesting.
This patch adds a --power-only mode to perf timechart that only
outputs the CPU power section of the SVG; this significantly
reduces the size of the SVG file, making even 30+ second traces
viewable with inkscape.
As a minor tweak for the same effect, the minimum text size is
decreased; current inkscape cannot zoom in deep enough to show text
this small, but it reduces inkscape compute time.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: peterz@infradead.org
LKML-Reference: <20090924154013.0675ab71@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several variables are not used at all, cut'n'paste leftovers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <20090928200818.GF3361@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several variables are not used at all, cut'n'paste leftovers.
Also check if the sample_type is RAW earlier, to avoid needless
searches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move histogram related functions into their own files (hist.c and
hist.h) and make use of them in builtin-annotate.c and
builtin-report.c.
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909281531180.8316@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create util/sort.[ch] and move common functionality for
builtin-report.c and builtin-annotate.c there, and make use of it.
Signed-off-by: John Kacur <jkacur@redhat.com>
LKML-Reference: <alpine.LFD.2.00.0909241758390.11383@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There was a colorful mix of header guards - standardize them.
Signed-off-by: John Kacur <jkacur@redhat.com>
LKML-Reference: <alpine.LFD.2.00.0909241756530.11383@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This function exists in builtin-report.c but not in
builtin-annotate.c Functions that use cmp_null are shorter and
clearer.
Synchronizing functions between these two files will also make it
easier to potential share code in the future.
Signed-off-by: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909241754031.11383@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
openat() is still a young glibc facility, better to not use it in a
non performance critical program (perf list)
Many machines have older glibc (RHEL 4 Update 5 -> glibc-2.3.4-2.36
on my dev machine for example).
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@redhat.com>
LKML-Reference: <4ABB767D.6080004@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"perf top" cores dump on my dev machine, if run from a directory
where vmlinux is present:
*** glibc detected *** malloc(): memory corruption: 0x085670d0 ***
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <4ABB6EB7.7000002@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I've tried building the docs in tools/perf/Documentation/ , and after
that `git status` showed dozen of untracked htmls. Let's ignore them.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
LKML-Reference: <1253790022-10300-1-git-send-email-kirr@mns.spb.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Inform util/module.c::mod_dso__load_module_paths() that relative
paths do exist in some modules.dep, and make it fail noisily should
it encounter a path that it doesn't understand, or a module it
cannot open.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: rostedt@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1253779628.10513.8.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avi Kivity reported 'perf annotate' failures with modules, the
requested function was not annotated.
If there are no modules currently loaded, or the last module
scanned is not loaded, dso__load_modules() steps on the value from
dso__load_vmlinux(), so we happily load the kallsyms symbols on top
of what we've already loaded.
Fix that such that the total count of symbols loaded is returned.
Should module symbol load fail after parsing of vmlinux, is's a
hard failure, so do not silently fall-back to kallsyms.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: rostedt@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1253697658.11461.36.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tweak the output SVG to increase performance in SVG viewers by
limiting the different types of font sizes and by smarter
transformations on the text.
At least with Inkscape this gives a notable performance improvement
during zoom and scrolling.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181438.3a49cb93@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a command line option for timechart that allows the
user to specify the width of the SVG file.
This patch also makes sure that each second of recording has at
least 200 units (pixels at 96 DPI) of width. This impacts
recordings longer than 5 seconds; recordings shorter than 5 second
will scale up to have a width of 1000 units for the whole recording
(as before).
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181416.69570c5d@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Given that scheduler latencies are the hot thing nowadays, show the
duration of said latencies in the SVG in text form.
In addition, if the latency is more than 10 msec, pick a brighter
yellow color as a way to point these long delays out.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181353.796f4509@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Timechart currently shows thin green lines for sending or receiving
wakeups. This patch also prints (in a very small font) the name of
the process that is being woken/wakes up this process.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181328.68baa978@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As per Ingo's review: use a #define rather than an open coded constant
for the maximum length of a trace event for storing in the perf.data file.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090919133630.10533d3e@infradead.org>
[ add a few comments to nearby functions ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As suggested by Ingo, add a timechart man page help text, as well
as add it to the "perf help" overview.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090919133604.3767fa35@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Be more consistent in the svghelper about the minimum text size
by having a global #define for this.
There needs to be a minimum text size in order to keep the size
of the SVG file within the reach of what current SVG viewers can
cope with.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090919133507.7374ef8b@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a command line option to record a trace, similar to "perf sched record".
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090919133442.0dc2c7f5@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
timechart is a tool to visualize what is going on in the system.
The user makes a trace of what is going on with
> perf record --timechart /usr/bin/some_command
and then can turn the output of this into an svg file
> perf timechart
which then can be viewed with any SVG view; inkscape works well
enough for me.
The idea behind timechart is to create a "infinitely zoomable"
picture; something that has high level information on a 1:1 zoom
level, but which exposes more details every time you zoom into a
specific area.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130713.6a77bbc0@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The timechart tool writes out SVG format output; this patch adds a
set of helper functions to abstract dealing with SVG from the core
timechart code.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130613.677f0516@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a sample_event type to the event_union so that raw samples can
be processed easily.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130511.411434b5@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
timechart needs to add a "callback" type command line argument that
does not take arguments.
This patch adds the parse-options.h infrastructure to make this
possible.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130440.548666c1@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The trace event name<->id mapping is dynamic for each kernel
compile. In order for perf.data to be useable outside the actual
system, we thus need to store a table of this mapping for later
use.
This patch adds this table to perf.data, and provides helper
functions for lookup up fields from this table.
To avoid mistakes, lookup-from-table is kept completely seprate
from lookup-from-local-debugfs.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130405.6960d099@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf timechart needs to know when a process forked, in order to be
able to visualize properly when tasks start.
This patch adds a time field to the event structure, and fills it
in appropriately.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130341.51ad2de2@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf sched record passes unparsed args on to perf record, so
specifying an output file via perf sched record -o FILE (cmd) just
works. Ergo, provide an option to specify input file as well.
Also add the missing 'map' command to help.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1253254944.20589.11.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The name length of some trace events is longer than 30, like
sys_enter_sched_get_priority_max and
ext4_mb_discard_preallocations.
Passing those events to perf-record will fail, try:
# ./perf record -f -e syscalls:sys_enter_sched_get_priority_max -F 1 -a
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F4AB.7050205@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
get_tracing_file() should be paired with put_tracing_file().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F48F.4070807@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For 'perf sched map' output, determine max_cpu automatically,
instead of the static default of 15.
[ v2: use sysconf() pointed out by Arjan van de Ven <arjan@infradead.org> ]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I noticed that perf-record continues profiling itself after the
child terminated and we're draining the buffer.
This can cause a _lot_ of overhead with --all recording - we keep
and keep recording, which produces new and new events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter noticed that we have 3 ways of referring to the idle thread:
[idle]:0
swapper:0
swapper-0
Standardize on 'swapper:0'.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use 'perf sched latency' to track the current task based on
context-switch events, and flag the cases where there's some
impossible transition: such as a PID being switched out that
was not switched in.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Output such lost event and state machine weirdness stats:
TOTAL: | 14974.910 ms | 46384 |
---------------------------------------------------
INFO: 8.865% lost events (19132 out of 215819, in 8 chunks)
INFO: 0.198% state machine bugs (49 out of 24708) (due to lost events?)
And increase buffering to -m 1024 (4 MB) by default. Since we
use output multiplexing that kind of space is needed.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This allows more precise 'perf sched latency' output:
---------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
---------------------------------------------------------------------------------------
ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms |
perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms |
bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms |
events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms |
events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms |
sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms |
sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms |
loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms |
loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms |
migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms |
---------------------------------------------------------------------------------------
TOTAL: | 2079.078 ms | 153 |
-------------------------------------------------
Also, streamline the code a bit more, add asserts for various state
machine failures (they should be debugged if they occur) and fix
a few odd ends.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Often it's useful to know the PID of the task as well - print it
out too.
( While at it, reformat the output to be a bit more
paste-into-commit-logs friendly. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before:
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
perf |4853313.251 ms | 10 | avg: 0.046 ms | max: 0.337 ms |
flush-8:0 |2426659.202 ms | 5 | avg: 0.015 ms | max: 0.016 ms |
sleep |485331.966 ms | 1 | avg: 0.012 ms | max: 0.012 ms |
ksoftirqd/1 |485331.320 ms | 1 | avg: 0.005 ms | max: 0.005 ms |
-----------------------------------------------------------------------------------
TOTAL: |8250635.739 ms | 17 |
---------------------------------------------
After:
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
perf | 0.206 ms | 10 | avg: 0.046 ms | max: 0.337 ms |
flush-8:0 | 2.680 ms | 5 | avg: 0.015 ms | max: 0.016 ms |
sleep | 0.662 ms | 1 | avg: 0.012 ms | max: 0.012 ms |
ksoftirqd/1 | 0.015 ms | 1 | avg: 0.005 ms | max: 0.005 ms |
-----------------------------------------------------------------------------------
TOTAL: | 3.563 ms | 17 |
---------------------------------------------
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Finish the -M/--multiplex option implementation:
- separate it out from group_fd
- correctly set it via the ioctl and dont mmap counters that
are multiplexed
- modify the perf record event loop to deal with buffer-less
counters.
- remove the -g option from perf sched record
- account for unordered events in perf sched latency
- (add -f to perf sched record to ease measurements)
- skip idle threads (pid==0) in latency output
The result is better latency output by 'perf sched latency':
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms |
at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms |
perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms |
Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms |
sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms |
-----------------------------------------------------------------------------------
TOTAL: | 4.925 ms | 58 |
---------------------------------------------
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently it's possible to meet such too high latency results
with 'perf sched latency'.
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms |
scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms |
The origin is on traces that are sometimes badly serialized across cpus.
For example the raw traces that raised such results for xfce4-panel:
(1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
The traces are processed in the order they arrive. Then in (2),
xfce4-panel sleeps, it is first waken up in (3) and eventually
scheduled in (5).
The latency reported is then 1504 - 1495 = 9 secs, as reported by perf
sched. But this is wrong, we are confident in the fact the traces are
nicely serialized while we should actually more trust the timestamps.
If we reorder by timestamps we get:
(1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
Now the trace make more sense, xfce4-panel is sleeping. Then it is
woken up in (1), scheduled in (2)
It goes to sleep in (3), woken up in (4) and scheduled in (5).
Now, latency captured between (1) and (2) is of 39 us.
And between (4) and (5) it is 2.1 ms.
Such pattern of bad serializing is the origin of the high latencies
reported by perf sched.
Basically, we need to check whether wake up time is higher than
schedule out time. If it's not the case, we need to tag the current
work atom as invalid.
Beside that, we may need to work later on a better ordering of the
traces given by the kernel.
After this patch:
xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add an option to multiplex counters output in the channel of
the group leader, ie: the first counter opened:
-M --multiplex
The effect is better serialized samples. This is especially
useful for tracepoint samples that need to be well serialized
for their post-processing.
Also make use of this option in 'perf sched'.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alias 'perf sched trace' to 'perf trace', for workflow completeness.
Add a bit of documentation for perf sched.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement the 'perf sched record' subcommand that adds a
default list of events, turns on raw sampling and system-wide
tracing and passes off the rest of the command to perf record.
This is more convenient than having to specify the events all
the time.
Before:
$ perf record -a -R -e sched:sched_switch:r -e sched:sched_stat_wait:r -e sched:sched_stat_sleep:r -e sched:sched_stat_iowait:r -e sched:sched_process_exit:r -e sched:sched_process_fork:r -e sched:sched_wakeup:r -e sched:sched_migrate_task:r -c 1 sleep 1
After:
$ perf sched record -f sleep 1
Also fix an assumption in the event string parser that assumed
that strings passed in can be modified. (In this case they wont
be as they come from a readonly constant section.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use a sort list for thread atoms insertion as well - instead of
hardcoded for PID.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Rename 'latency' field/variable names to the better 'atom' ones
- Reduce the number of #include lines and consolidate them
- Gather file scope variables at the top of the file
- Remove unused bits
No change in functionality.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Separate the option parsing cleanly and add two variants:
- 'perf sched latency' (can be abbreviated via 'perf sched lat')
- 'perf sched replay' (can be abbreviated via 'perf sched rep')
Also add a repeat count option to replay and add a separation
set of options for replay.
Do the sorting setup only in the latency sub-command.
Display separate help screens for 'perf sched' and
'perf sched replay -h' - i.e. further separation of the
sub-commands.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement multidimensional sorting on perf sched so that
you can sort either by number of switches, latency average,
latency maximum, runtime.
perf sched -l -s avg,max (this is the default)
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms |
xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms |
xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms |
notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms |
xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms |
xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms |
xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms |
xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms |
firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms |
xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms |
:5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms |
events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms |
Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms |
geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms |
reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms |
kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
