Commit Graph

2006 Commits

Author SHA1 Message Date
Paul Mackerras
e80ac32767 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufs into merge 2008-06-16 14:52:56 +10:00
Luke Browning
028fda0a6c powerpc/spufs: fix missed stop-and-signal event
There is a delay in the transition to the stopped state for class 2
interrupts. In some cases, the controlling thread detects the state of
the spu as running, and goes back to sleep resulting in a hung
application as the event is missed.

This change detects the stop condition and re-generates the wakeup event
after a context save.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-06-16 14:35:01 +10:00
Luke Browning
2c911a14b7 powerpc/spufs: synchronize interaction between spu exception handling and time slicing
Time slicing can occur at the same time as spu exception handling
resulting in the wakeup of the wrong thread.

This change uses the the spu's register_lock to enforce synchronization
between bind/unbind and spu exception handling so that they are
mutually exclusive.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-06-16 14:35:01 +10:00
Luke Browning
1f64643aa5 powerpc/spufs: remove class_0_dsisr from spu exception handling
According to the CBEA, the SPU dsisr is not updated for class 0
exceptions.

spu_stopped() is testing the dsisr that was passed to it from the class
0 exception handler, so we return a false positive here.

This patch cleans up the interrupt handler and erroneous tests in
spu_stopped. It also removes the fields from the csa since it is not
needed to process class 0 events.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-06-16 14:35:00 +10:00
Luke Browning
d84050f48e powerpc/spufs: wait for stable spu status in spu_stopped()
If the spu is stopping (ie, the SPU_STATUS_RUNNING bit is still set),
re-read the register to get the final stopped value.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-06-16 14:34:59 +10:00
Kumar Gala
c4ea896476 [POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups
The MPC85xx MDS board requires some board level tweaks of the PHYs that
either the eTSEC (gianfar) or UCC ethernet controllers are connected to.

Its possible to build the phylib as a module, however this breaks the
board level fix ups because phy_read and phy_write are not available
if we build as a module.

So we unconditionally select PHYLIB to ensure its built into the kernel
if we are building in MPC85xx MDS support.  This was determined to be
the easiest soultion even though it prevents the user from removing
PHYLIB support if they decide they don't want it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 08:45:07 -05:00
Al Viro
c409d52bd1 celleb_scc_pciex endianness misannotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-04 08:06:02 -07:00
Al Viro
9307245765 mpc52xx_gpio iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-04 08:06:02 -07:00
Geoff Levand
ecc240f90b [POWERPC] PS3: Fix memory hotplug
A change was made to walk_memory_resource() in commit
4b119e21d0 that added a
check of find_lmb().  Add the coresponding lmb_add()
call to ps3_mm_add_memory() so that that check will
succeed.

This fixes the condition where the PS3 boots up with
only the 128 MiB of boot memory, and doesn't see the
other 128MiB that is available.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 16:15:29 +10:00
Jean Delvare
238a871e41 i2c: Switch pasemi to the new device/driver matching scheme
The old device/driver matching scheme is going away so stop using it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Olof Johansson <olof@lixom.net>
2008-05-18 20:49:40 +02:00
Ishizaki Kou
7012255aae [POWERPC] cell: Fix section mismatches in io-workarounds code
Fix following warnings:
WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0x9c): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.iowa_register_bus()
WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0xa4): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.io_workaround_init()

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:49:57 +10:00
FUJITA Tomonori
dfe1e09f22 [POWERPC] spufs: Fix compile error
With CONFIG_VIRT_CPU_ACCOUNTING disabled, I got the following error:

linux-2.6/arch/powerpc/platforms/cell/spufs/file.c: In function 'spu_switch_log_notify':
linux-2.6/arch/powerpc/platforms/cell/spufs/file.c:2542: error: implicit declaration of function 'get_tb'
make[4]: *** [arch/powerpc/platforms/cell/spufs/file.o] Error 1

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:49:55 +10:00
Luke Browning
08fcf1d611 [POWERPC] spufs: Fix pointer reference in find_victim
If victim (not ctx) is in spu_run, add victim to rq.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:47:17 +10:00
Jeremy McNicoll
bfd123bf91 [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
The following adds local bus, flash and MTD partition nodes for
sbc8548. As well, a compatible field for the soc node, so that
of_platform_bus_probe() will pick it up.

Something that is provided through this newly added epld node
is the Hardware Revision which is now being utilized.

Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Andy Fleming
73f5b8f942 [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Anton Vorontsov
f637ef8ea0 [POWERPC] 86xx: mpc8610_hpcd: fix second serial port
DIU platform code should not just write to the PIXIS' BRDCFG0 register,
it should set and clear its own bits only, otherwise it will break
firmware setup (in fact it breaks second uart).

Also get rid of magic numbers in the related code.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Anton Vorontsov
34b4a8731f [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes
This patch adds device tree nodes for NOR and NAND flashes and places
board-control node inside the localbus.

defconfig and board file updated appropriately.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Andy Fleming
94833a4276 [POWERPC] 85xx: Add 8568 PHY workarounds to board code
The 8568 MDS needs some configuration changes to the PHY in order to
work properly.  These are done in the firmware, normally, but Linux
shouldn't need to rely on the firmware running such things (someone
could disable the PHY support in the firmware to save space, for instance).

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Linus Torvalds
d9a9a23ff2 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits)
  [POWERPC] Remove leftover printk in isa-bridge.c
  [POWERPC] Remove duplicate #include
  [POWERPC] Initialize lockdep earlier
  [POWERPC] Document when printk is useable
  [POWERPC] Fix bogus paca->_current initialization
  [POWERPC] Fix of_i2c include for module compilation
  [POWERPC] Make default cputable entries reflect selected CPU family
  [POWERPC] spufs: lockdep annotations for spufs_dir_close
  [POWERPC] spufs: don't requeue victim contex in find_victim if it's not in spu_run
  [POWERPC] 4xx: Fix PCI mem in sequoia DTS
  [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver
  [POWERPC] 4xx: Fix problem with new TLB storage attibute fields on 440x6 core
  [POWERPC] spufs: spu_create should send inotify IM_CREATE event
  [POWERPC] spufs: handle faults while the context switch pending flag is set
  [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions
  [POWERPC] spufs: try to route SPU interrupts to local node
  [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqs
  [POWERPC] spufs: don't acquire state_mutex interruptible while performing callback
  [POWERPC] spufs: update master runcntl with context lock held
  [POWERPC] spufs: fix post-stopped update of MFC_CNTL register
  ...
2008-05-09 08:06:31 -07:00
Paul Mackerras
2a5f2e3e6c Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2008-05-09 20:12:06 +10:00
Linus Torvalds
28a4acb485 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  net: Added ASSERT_RTNL() to dev_open() and dev_close().
  can: Fix can_send() handling on dev_queue_xmit() failures
  netns: Fix arbitrary net_device-s corruptions on net_ns stop.
  netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values
  netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request
  macvlan: Fix memleak on device removal/crash on module removal
  net/ipv4: correct RFC 1122 section reference in comment
  tcp FRTO: SACK variant is errorneously used with NewReno
  e1000e: don't return half-read eeprom on error
  ucc_geth: Don't use RX clock as TX clock.
  cxgb3: Use CAP_SYS_RAWIO for firmware
  pcnet32: delete non NAPI code from driver.
  fs_enet: Fix a memory leak in fs_enet_mdio_probe
  [netdrvr] eexpress: IPv6 fails - multicast problems
  3c59x: use netstats in net_device structure
  3c980-TX needs EXTRA_PREAMBLE
  fix warning in drivers/net/appletalk/cops.c
  e1000e: Add support for BM PHYs on ICH9
  uli526x: fix endianness issues in the setup frame
  uli526x: initialize the hardware prior to requesting interrupts
  ...
2008-05-08 19:03:26 -07:00
Christoph Hellwig
02539d71fa [POWERPC] spufs: lockdep annotations for spufs_dir_close
We need to acquire the parent i_mutex with I_MUTEX_PARENT to keep
lockdep happy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-08 15:29:12 +10:00
Christoph Hellwig
7a28a1549f [POWERPC] spufs: don't requeue victim contex in find_victim if it's not in spu_run
We should not requeue the victim context in find_victim if the owner is
not in spu_run. It's first not needed because leaving the context on
the spu is an optimization and second is harmful because it means the
owner could re-enter spu_run when the context is on the runqueue and
trip the BUG_ON in __spu_update_sched_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-08 15:26:32 +10:00
Jeff Garzik
54c852a2d6 Merge branch 'for-2.6.26' of git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream 2008-05-06 12:22:03 -04:00
Christoph Hellwig
826be063ee [POWERPC] spufs: spu_create should send inotify IM_CREATE event
Creating a spufs context or gand using spu_create should send an inotify
event so that things like performance monitors have an easy way to find
out about newly created contexts.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-06 09:24:24 +10:00
Denis V. Lunev
9185ef6787 [POWERPC] Assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.
No need to check for data!=NULL after that.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05 16:47:14 +10:00
Luke Browning
de1028927a [POWERPC] spufs: handle faults while the context switch pending flag is set
Currently, page fault handlers don't issue a mfc restart if the context
switch pending flag is set, which can leave us with a hanging DMA after
a context restore.

This patch introduces fault pending flag that is set by the fault
handler and read by the context switch code, so that the latter can add
the restart bit at the right spot, after it has successfuly saved the
state of the mfc control register.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:44 +10:00
Luke Browning
f3d69e0507 [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions
SPU class 0 & 1 exceptions may occur in parallel, so we may end up
overwriting csa.dsisr.

This change adds dedicated fields for each class to the spu and the spu
context so that fault data is not overwritten.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:44 +10:00
Luke Browning
7a2142002f [POWERPC] spufs: try to route SPU interrupts to local node
Currently, we re-route SPU interrupts to the current cpu, which may be
on a remote node. In the case of time slicing, all spu interrupts will
end up routed to the same cpu, where the spusched_tick occurs.

This change routes mfc interrupts to the cpu where the controlling
thread last ran, provided that cpu is on the same node as the spu
(otherwise don't reroute interrupts).

This should improve performance and provide a more predictable
environment for processing spu exceptions. In the past we have seen
concurrent delivery of spu exceptions to two cpus. This eliminates that
concern.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Luke Browning
093c16bf9b [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqs
synchronize_irq() provides the serialization for
SPU_CONTEXT_SWITCH_PENDING which is read with a simple load. This
routine guarantees that the relevant interrupt handlers are not running,
so that the next time they do run they will see the update
memory value.

This must be done correctly so that exception handling code does not
restart the mfc in the middle of a context switch while we are trying
to atomically stop it and save state.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Jeremy Kerr
d29694f068 [POWERPC] spufs: don't acquire state_mutex interruptible while performing callback
There's currently no way to tell if spu_process_callback has
returned with the state mutex held, as -EINTR may be returned
by either the syscall or the spu_acquire fail case.

Instead, just do a non-interruptible mutex_lock here.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Jeremy Kerr
c0bace5c70 [POWERPC] spufs: update master runcntl with context lock held
Currently, we update the SPU master run control bit (ie,
spu_enable_spu) in spufs_run_spu before we grab the context mutex. This
can result in races with other processes accessing this context's
resources.

This change moves the spu_enable_spu to after we have acquired the
context lock.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Jeremy Kerr
55d7cd74d4 [POWERPC] spufs: fix post-stopped update of MFC_CNTL register
We currently have two issues with the MFC save code:

 * save_mfc_decr doesn't handle a transition of 1 -> 0 of the Ds bit
 * The Q bit may be stale in the CSA

This change fixes the first issue by clearing the relevant bits from
the MFC_CNTL value in the CSA before or-ing in the updated status.
Also, we add the Q bit to the updated status.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Jeremy Kerr
1ca4264ee1 [POWERPC] spufs: fix save of mfc_cntl register
Currently, we can introduce invalid entries into the MFC queues:

1) context starts a DMA

2) context gets scheduled out during a DMA
  - kernel saves MFC queue to CSA
  - kernel saves 0x0 in csa->mfc_control_RW

3) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set, so DMA queues are
    restored from the CSA

4) context's DMA is completed

5) context gets scheduled out again, no DMA occuring this time
  - kernel sees that MFC_CNTL[Q] ('queues empty') is set, so doesn't
    touch saved queue data in CSA
  - kernel saves 0x0 in csa->mfc_control_RW

6) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set (we saved is as 0!),
    so DMA queues are restored from the CSA

In this last restore, we've restored the queue status from step 2,
which are now invalid.

This change makes save_mfc_cntl() closer to the save/restore sequence,
as specified in the CBE handbook.

With changes from Luke Browning.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Jeremy Kerr
943906ba4b [POWERPC] spufs: don't touch suspend bits when purging DMA queue
When we issue a MFC purge request, we may inadvertantly clear the
suspended status.

This change adds the MFC_CNTL_SUSPEND_MASK when we issue a purge
request, so that the suspend bit is masked out.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Jeremy Kerr
5711fe900d [POWERPC] cell: Fix lost interrupts due to fasteoi handler
We may currently lose interrupts during SPE context switch, as we alter
the INT_Route register. Because the IIC uses a per-thread priority
status, changing the interrupt routing to a different thread means that
the IRQ is no longer masked by the priority status, so we end up with
two fasteoi IRQ handlers executing for the one irq_desc. The fasteoi
handler doesn't handle multiple IRQs, so drops the second one.

Fix this by using our own flow handler. This is based on
handle_edge_irq, but issues an eoi after IRQs are handled, and doesn't
do any mask/unmasking.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Linus Torvalds
c36c804559 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] PS3: Remove unsupported wakeup sources
  [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
  [POWERPC] PS3: Add time include to lpm
  [POWERPC] Fix slb.c compile warnings
  [POWERPC] Xilinx: Fix compile warnings
  [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
  [RAPIDIO] fix current kernel-doc notation
  [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
  Fix a potential issue in mpc52xx uart driver
  [POWERPC] mpc5200: Allow for fixed speed MII configurations
  [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-03 10:01:33 -07:00
Geert Uytterhoeven
fdedb4caea [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
The routines ps3_virq_setup() and ps3_virq_destroy() are used
in only one file, so make them static.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:44 +10:00
Al Viro
9f3acc3140 [PATCH] split linux/file.h
Initial splitoff of the low-level stuff; taken to fdtable.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-01 13:08:16 -04:00
Linus Torvalds
ec31b21241 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix crashkernel= handling when no crashkernel= specified
  [POWERPC] Make emergency stack safe for current_thread_info() use
  [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h
  [POWERPC] spufs: trace spu_acquire_saved events
  [POWERPC] spufs: fix marker name for find_victim
  [POWERPC] spufs: add marker for destroy_spu_context
  [POWERPC] spufs: add sputrace marker parameter names
  [POWERPC] spufs: add context switch notification log
  [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200
  [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
  [POWERPC] mpc5200: Fix FEC error handling on FIFO errors
  [POWERPC] mpc5200: add Phytec pcm030 board support
  [POWERPC] mpc5200: add gpiolib support for mpc5200
  [POWERPC] mpc5200: add interrupt type function
  [POWERPC] mpc5200: Fix unterminated of_device_id table
2008-04-30 08:37:40 -07:00
Paul Mackerras
595f403c1a Merge git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufs 2008-04-30 16:53:17 +10:00
Kumar Gala
d0eb801c60 [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 16:29:30 +10:00
Julio M. Merino Vidal
3734dfc68b [POWERPC] spufs: trace spu_acquire_saved events
The sputrace module contained a trace entry for spu_acquire_saved, but
this marker was not placed anywhere. Fix this by adding a marker to the
routine.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:21:17 +10:00
Julio M. Merino Vidal
8a476d4955 [POWERPC] spufs: fix marker name for find_victim
Fix a typo in the marker for the find_victim function, which prevented
it from being traced. It previously read find_vitim.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:16:14 +10:00
Julio M. Merino Vidal
534578816f [POWERPC] spufs: add marker for destroy_spu_context
The sputrace module contained a reference to a marker for
destroy_spu_context, but this marker did not appear in the code. Fix
this by adding a marker in the function.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:12:30 +10:00
Julio M. Merino Vidal
d6508aaf27 [POWERPC] spufs: add sputrace marker parameter names
The markers facility defines the marker parameters to be of the form
'name %format'. Add parameter names to sputrace, to specify the context
and %spu paramerters,  instead of just specifying the '%format' part.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:06:39 +10:00
Christoph Hellwig
5158e9b521 [POWERPC] spufs: add context switch notification log
There are userspace instrumentation tools that need to monitor spu
context switches. This patch adds a new file called 'switch_log' to
each spufs context directory that can be used to monitor the context
switches.

Context switch in/out and exit from spu_run are monitored after the
file was first opened and can be read from it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:01:54 +10:00
Linus Torvalds
867a89e0b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [RAPIDIO] Change RapidIO doorbell source and target ID field to 16-bit
  [RAPIDIO] Add RapidIO connection info print out and re-training for broken connections
  [RAPIDIO] Add serial RapidIO controller support, which includes MPC8548, MPC8641
  [RAPIDIO] Add RapidIO node probing into MPC86xx_HPCN board id table
  [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file
  [RAPIDIO] Auto-probe the RapidIO system size
  [RAPIDIO] Add OF-tree support to RapidIO controller driver
  [RAPIDIO] Add RapidIO multi mport support
  [RAPIDIO] Move include/asm-ppc/rio.h to asm-powerpc
  [RAPIDIO] Add RapidIO option to kernel configuration
  [RAPIDIO] Change RIO function mpc85xx_ to fsl_
  [POWERPC] Provide walk_memory_resource() for powerpc
  [POWERPC] Update lmb data structures for hotplug memory add/remove
  [POWERPC] Hotplug memory remove notifications for powerpc
  [POWERPC] windfarm: Add PowerMac 12,1 support
  [POWERPC] Fix building of pmac32 when CONFIG_NVRAM=m
  [POWERPC] Add IRQSTACKS support on ppc32
  [POWERPC] Use __always_inline for xchg* and cmpxchg*
  [POWERPC] Add fast little-endian switch system call
2008-04-29 08:19:14 -07:00
Denis V. Lunev
667471386d powerpc: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Add correct ->owner to proc_fops to fix reading/module unloading race.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
s.hauer@pengutronix.de
106757b38f [POWERPC] mpc5200: add Phytec pcm030 board support
Add board support for the Phytec pcm030 mpc5200b based board. It
does not need any platform specific fixups and as such is handled
as a mpc5200 simple platform.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:17:12 -06:00