6431243f15
This adds bindings documentation for the AHCI controller on Tegra210. Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
45 lines
1.5 KiB
Plaintext
45 lines
1.5 KiB
Plaintext
Tegra SoC SATA AHCI controller
|
|
|
|
Required properties :
|
|
- compatible : Must be one of:
|
|
- Tegra124 : "nvidia,tegra124-ahci"
|
|
- Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
|
|
- Tegra210 : "nvidia,tegra210-ahci"
|
|
- reg : Should contain 2 entries:
|
|
- AHCI register set (SATA BAR5)
|
|
- SATA register set
|
|
- interrupts : Defines the interrupt used by SATA
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names : Must include the following entries:
|
|
- sata
|
|
- sata-oob
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- sata
|
|
- sata-oob
|
|
- sata-cold
|
|
- phys : Must contain an entry for each entry in phy-names.
|
|
See ../phy/phy-bindings.txt for details.
|
|
- phy-names : Must include the following entries:
|
|
- For Tegra124 and Tegra132:
|
|
- sata-phy : XUSB PADCTL SATA PHY
|
|
- For Tegra124 and Tegra132:
|
|
- hvdd-supply : Defines the SATA HVDD regulator
|
|
- vddio-supply : Defines the SATA VDDIO regulator
|
|
- avdd-supply : Defines the SATA AVDD regulator
|
|
- target-5v-supply : Defines the SATA 5V power regulator
|
|
- target-12v-supply : Defines the SATA 12V power regulator
|
|
|
|
Optional properties:
|
|
- reg :
|
|
- AUX register set
|
|
- clock-names :
|
|
- cml1 :
|
|
cml1 clock should be defined here if the PHY driver
|
|
doesn't manage them. If it does, they should not be.
|
|
- phy-names :
|
|
- For T210:
|
|
- sata-phy
|